So let's not specify it as a build dependency.
Also remove some unnecessary manual library linkage and remove the
wsWidgets GUI property sheet, which does nothing useful.
Feedback fix, when more than two gamepad are used simultaneously.
Change all 'this->' by 'm_'
fix on the hack sixaxis pressure
Modification of the size (1000x760 -> 1000x730)
Can set all buttons. Buttons labels are not printed correctly in spite of update and refresh
The cause of this problem come from the while in the config_key function which monopolise ressources
Add arrow pictures implementation
OnePad : bug fixed (assert failure)
Modification of copyright
It's been available since XP and it's not special like XInput (where we
might have SCP in the middle) so let's have the linker resolve the
functions at link time.
The following patch uses the height value of the display rectangle rather than make an estimation of the Frame buffer height when the game uses a non-referenceable height (or) width.
Don't lookup a depth buffer if depth test is always pass without write
Boost performance on Tekken5 when depth emulation is enabled in openGL
(Tekken5 sets same address for both the RT and the depth but depth is disabled)
v2:
Keep ds if DATE is enabled (some implementation uses a stencil buffer)
Be more aggressive to avoid an useless depth lookup
Texture coordinate could be dummy/float/int integral/int normalized.
Old behavior:
* VS was in charge to select the texture coordinate
* int integral format wasn't supported
New behavior:
* Always compute all formats
* FS will be in charge to select the good format
Impact:
* VS will be slightly slower but it reduces shaders permutation from
little to 0 (won't be bad for CPU)
* FS speed isn't impacted as 2 separate code paths were already required
to support both format
* Rasterizer will be 33% slower but unlikely to be the limited factor of
the GPU
* In future we could directly use the integral format in the FS.
V2: remove useless PSin_t
It would be on by default. Unsafe & fast path.
The hack is a security if someone encounters any issue
v2: update Windows gui file
v3: fix typo in tooltip and linux gui
Buttons done, configuration initialization done.
Still need to add Gamepad and Joysticks configuration frames.
Require png file for the moment (the embedded picture will be fixed after).
New Onepad GUI based on wxWidget (Main frame almost finish)
Background picture is now embedded
Button binding works
Loading and saving works
Need to add feedback and gamepad, joysticks configuration frame
Modification of the onepad CMakeList.txt
Automatic generation of images headers using perl script
Modification of the test feedback function
Visual Studio Find and Replace can only be trusted if all the files are
included in the project. I suppose it's time to add any missing files
to the relevant projects...
The old implementation saved the current value of a GSSetting as uint in
a field called 'id'. The implementation of GSSettings suggests that
GSSettings could be saved in a database with id as primary key. This
would require a translation look up from id to value but could have all
advantages of a database. However the interface to GSSetting was never
implemented like that.
In the new implementation GSSetting has a 'value' field that stores an
int representative value of the desired state. Additionally the
constructor is 'overloaded' as template to reduce casting in the
consumer code. However all consumer values need to be castable to int.
Accordingly combobox initialization was adjusted.
Initially it was free to do the SW blending because safe fbmask
will already do a sw blending.
Unsafe version uses a fast path with a limited blending. Therefore
SW blending isn't free anymore.
Improve the speed of the previous speed hack (xenosaga 1)
The hack relies on the undefined behavior of the hardware so it can
potentially generate rendering corruption.
This new hack drops the cache flusing when only the alpha channel is masked.
Alpha is a direct copy of the fragment. Normally masked bits will be constant
everywhere (RT, FS output, texture cache) so it would likely work.
Just in case, code is only enabled with the new shiny hack
The previous behaviour loaded the saved renderer config whenever the
adapter combobox was changed. The renderer will now only change if the
new adapter doesn't support the currently selected renderer (i.e
Direct3D11 might not be supported, so it'll revert to Direct3D 9).
Fixes#1080.
The Wild Arms Offset text was slightly cut off due to the label being
too small. Make the dialog slightly wider so the full text will fit.
Someone should probably make the dialog look nicer at some point.
Avoid a crash on Onimusha3 (PAL 60HZ)
In theory it will be better to find the root cause of overflow. I.e. somewhere in this
code below. Dirty rectangle is too big.
***********************************************************************
if(rowsize > 0 && offset % rowsize == 0)
{
int y = GSLocalMemory::m_psm[psm].pgs.y * offset / rowsize;
if(r.bottom > y)
{
GL_CACHE("TC: Dirty After Target(%s) %d (0x%x)", to_string(type),
t->m_texture ? t->m_texture->GetID() : 0,
t->m_TEX0.TBP0);
// TODO: do not add this rect above too
t->m_dirty.push_back(GSDirtyRect(GSVector4i(r.left, r.top - y, r.right, r.bottom - y), psm));
t->m_TEX0.TBW = bw;
continue;
}
}
***********************************************************************
So as a temporary solution (that will likely stay for a couple of
years), buffers were increased.
Height of the dirty rectangle must be the GS size of the RT. Of course
RT doesn't have any height so we compute the max safest value.
Fix issue #987
Candidate for 1.4 release
15ms latency is too little most of the time, but if the stars align (light game,
fast system, the correct audio output module - portaudio comes to mind), it
might work well/reasonably, so allow it.
Watch the console for stretcher related messages. If you hear bad audio (clicks
etc) or notice reset/underruns messages, it means the latency is too low. The
optimal behavior (stretching is locked to 1:1) is when a message "stretch: None (1:1)"
shows at the console, which isn't followed by a message "stretch: Dynamic" or
resets or spu2 underruns.
I'm pretty sure such low latency with good performance (mostly locked to 1:1)
was not possible in the past, but it seems possible (sometimes) now. Maybe the
previous "black magic" commit helps
The default is still 100ms which is still fine for most cases.
This commit affects Windows. Linux still has a different minimum, probably
mostly due to UI/constants. Maybe someone should test and change that too.
I don't have a fully scientific explanation here, but it seems that with big
buffers (~200ms and up), the stretcher adjustment can overshoot the target
equilibrium back and forth, in effect never stabilizing.
This commit makes it change slightly slower which somehow seems to improve its
behavior. Sorry for not having a better explanation, as at this stage tuning the
stretcher has become somewhat of a black magic.
But hey, if it works...
Tested with buffers from 30ms to 1000ms, and with playback speed and speed
changes between 30% and 500%, and as far as I can tell it only makes it better.
Fingers crossed.
Both the Linux and Windows config dialogs now have a TV Shaders combobox,
so the F7 toggle can be made temporary. This makes the hotkey behaviour
consistent with all the other hotkeys.
Fixes the PadNull crash when any window event occurs due to mixing and
matching Unicode and MBCS window handles. Thanks to Volkanite for
figuring out why it was broken.
There's already a SysMessage definition, so a second one is unnecessary.
Cleanup some headers as well. I wanted to remove the about box as well,
but that can wait.
By doing more copy/pasting.
The directory creation code was removed - it doesn't create any
necessary parent directories so it's not all that useful.
It would be great if all plugins shared config code, but it's probably
to have all the plugins use Unicode on Windows first.
I don't understand the magic but sometimes pad buttons are detected as buttons
sometimes as axis. Create an option so people can test both and hopefully find a working solution
Note: you need to restart the plugin to take the option into account
Note2: fix dual pad init too
Related issue #938 and #414
Previously the sound touch configure caption box will still have the outdated value of the sliders when using the restore defaults function, update the caption text also during restore defaults. ( use the first slider value for caption since that lies closer to the restore default box )
The old one isn't working. I don't think there's a URL that redirects to
whatever language the user is using (unless my browser settings are
wrong), so I've just used the English US URL.
1. Add GS_Renderer Enum
Replace all instances of int/uint32 renderer identifier by a strongly
typed enum and appropriate casts.
Only instances in GS[*].cpp/h classes were touched. GPU[*].cpp/h classes
do not to follow the same convention.
2. Add default renderer according to OS
The default renderer is OS dependent (Win -> Dx9HW, others -> OGLHW).
Consequently one should always check againt the appropriate default
value on config load.
The old behaviour was only - if a at all - problematic if the respective
element in the gsdx.ini was missing and probably even then didn't create
issues. The current implementation is still more stable and does not
depend on the implementation of GS.cpp -> GetConfig()
The following patch adds Mipmap option (software mode exclusive) and Preload Data Frame (Hardware mode exclusive) to the GSDX plugin settings for debug purposes.
When X autorepeat is enabled, it will generate down/up, down/up, ... sequences
So it was decided to disable it. Unfortunately the configuration is for
the full system which is very annoying (state isn't restored after an
ASSERT or EXCEPTION)
Initially the plugin handles the event from the X loop. However since
the GSopen2 switch events are already intercepted by the WX core GUI.
The core will route them back to the input plugin.
Wx filters automatically generated event so initial sequence is now
down, down, down/up. No more autorepeat issue, so no need to screw up
the system.
Close#945
Note: SDL_Init is mandatory oterwise SDL_OpenAudio will redo the init.
So the only sane way is to initialize pulseaudio, close everything, and finally
init the requested driver.
V2:
* ifdef SDL2 code
V3:
* use std::string for m_api (avoid issue issue with wx2.8)
* call the good function to properly close subsystem avoid crashes
The purpose is to workaround bug with default API
Code is not ideal because SDL/gui are mixed. But it would be enough
for future release.
V2: ifdef SDL2 code
Add images for the new GUI
Onepad : wxWidget GUI
Replace headers by png files.
OnePad: wxWidget HUI (Images)
Fix l2.png file (white background instead to a transparent one).
The goal is to check the impact on game that have wrong RT content.
It helps a bit Smash Court Tennis Pro Tournament 2 but the game suffers
another texture cache bug. (RT BW is 10 whereas texture BW is 8)
Note: Armored Core: Last Raven must be tested (only game so far
that rely on the option and I didn't want to add a new one).
CID 147033 (#1 of 1): Uninitialized pointer field (UNINIT_CTOR)16. uninit_member: Non-static class member ActualPaCallback is not initialized in this constructor nor in any functions that it calls.
Typical wrong draw:
1/ draw in 32 bits
2/ draw in 24 bits
3/ Use alpha as a texure. (Must reuse the GPU data)
4/ Write alpha from EE
5/ Use alpha as a texure. (Must upload new data)
This commit fixes the step 5.
Fix#917 (Conflict - Desert Storm)
* the break doesn't get used since HANDLE_CHECK consists of a break on the function itself.
* removed an outdated comment since realtime update of configure has been done.
previously the soundtouch configure box required a total exit of the dialog to get the configure box value updated , now it's made to be done in an instant.
CID 146973 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)2. uninit_member: Non-static class member overflow is not initialized in this constructor nor in any functions that it calls.
2999}
runion/rempty/rinter requires x < z and y < w
Help issue #762 (accurate blending issue)
If you want to shine, please put better GSVector code (AVX512 is 2 instruction :p)
In the DATE42 algo, first pass must find the primitive that write the
bad alpha value. If depth test is fail, alpha value won't be written therefore
you mustn't keep the primitive id.
In theory to ensure 100% correctness, depth would need to be fully executed
(currently depth write is disabled). However it requires to copy the depth buffer.
It is likely bad for the perf.
Issue reported on DBZInfWorld
Function pointer was mangled to avoid any collision. Nowadays all symbols
are hidden so no risk of collision.
Syntax is nicer beside it would allow to put back GLES3.2. I think it
supports most of the used extension.
glActiveTexture & glBlendColor are provided without symbol query.
CID 146834 (#2-1 of 2): Division or modulo by zero (DIVIDE_BY_ZERO)9. divide_by_zero: In expression tpf * 10000ULL / ttpf, division by expression ttpf which may be zero has undefined behavior.
CID 146839 (#1 of 1): Explicit null dereferenced (FORWARD_NULL)11. var_deref_model: Passing null pointer fb_pages to UsePages, which dereferences it.
CID 146840 (#1 of 1): Explicit null dereferenced (FORWARD_NULL)11. var_deref_model: Passing null pointer zb_pages to UsePages, which dereferences it.
* Prevent a potential null pointer deference in ```void GSRendererSW::UsePages()```
+ Isolate every SDL code paths and replace any call to them by call to a generic class "GamePad" of which JoystickInfo is now a child.
+ Now backends can be added by inheriting GamePad generic class.
+ There is just one function change which is redundant with next commits but otherwise commit will not compile(which is more evil).
+ Objectify conf class.
+ Make some members private as they need to have their range checked before being set
+ Change "options" variables into an union contraining bitfield representation of it. Allows to make code more expressive/readable.
CID 147046 (#1 of 1): Useless call (USELESS_CALL)
side_effect_free: Calling ApplyVolume(Ext, Cores[1].ExtVol) is only useful for its return value, which is ignored.
Disable and overrides the following hacks at the config and dialog:
- Disable screensaver
- Safe fullscreen exit on escape
- save state in title
All of those are hacks which PCSX2 doesn't need anymore and therefore are just
confusing if enabled.
Note that we assume PCSX2 is synonym for PS2 mode in LilyPad, and while AFAIK it
is the case now, it might need a more fine grained override system.
All combobox text can now be seen in full without having to click on the
combobox.
The internal and custom resolution stuff has been moved into the Hardware
Mode Settings groupbox since it doesn't affect software mode.
The dialog has also been rearranged a bit.
shaders/GSdx.fx is now the default location and is no longer hardcoded.
The external shader and external shader config can now be selected. (The
OpenGL renderer already has this feature.)
Note: It is still possible to not use a config file, just use an invalid
value for shaderfx_conf.
Don't use D3DX compile from file and compile from resource functions -
use the compile from memory function instead. It does the same thing,
except you have to set things up yourself.
Benefits:
Allows external shaders to be split into a config file and a shader file
without hardcoding the config file name.
Less code.
Yes, I more or less used the same message as the dx11 one.
Don't use D3DX compile from file and compile from resource functions -
use the compile from memory function instead. It does the same thing,
except you have to set things up yourself.
Benefits:
Easier move to D3DCompile when it becomes necessary.
Allows external shaders to be split into a config file and a shader
file without hardcoding the config file name.
Less code.
OpenGL does not use the cdecl calling convention (which is the default
calling convention for GSdx on Windows). Since DebugOutputToFile is used
by OpenGL, it needs to use the same calling convention that OpenGL uses.
This fixes a debug build crash when the OpenGL renderers are used and
debug_opengl is nonzero in the ini.
A couple of useless members were removed too.
Also fix wnd initialization
Coverity:
CID 146955 (#1 of 1): Uninitialized pointer read (UNINIT)
18. uninit_use: Using uninitialized value wnd[i].
Coverity:
CID 146816 (#1 of 1): Calling risky function (DC.STREAM_BUFFER)
dont_call: fscanf(FILE *, char const *, ...) assumes an arbitrarily large string, so callers must use correct precision specifiers or never use fscanf(FILE *, char const *, ...)
Without this patch, if a user initiates a recording and then cancels at the GSdx
dialog, the audio was recording anyway, which is probably highly unexpected.
However, while probably highly unexpected, it could still be useful to record
only audio, but with this patch it's now impossible.
We can reconsider if it turns out that people are actually using this "feature",
though one might as well set the video setting to be very unobtrusive (very low
resolution/bitrate) such that it uses very little CPU.
This is the internal resolution which GSdx uses and recording at this resolution
is optimal, i.e. without any dumb scaling, with all relevant pixels and without
redundant pixels.
The resulting clip still doesn't have the correct aspect ratio set, but that's
just a property which can be set to the clip afterwards, which is where the DAR
becomes useful. Since it's usually anamorphic, when muxing later with the audio
use the DAR to set the playback aspect ratio.
gsdx changes:
Remove native resolution checkbox from GUI and rework associated code
Small changes to Windows and Linux GUI
Support 8x native resolution
Fix custom resolution width less than native width use case
Previously it was saving the display name to the config but trying to restore
according to the friendly name.
Now store and restore according to the "displayName" which is more unique than
"friendlyName" since it includes GUID[s], and handle it consistently as _bstr_t.
This fixes the following issues when custom resolution is selected.
- When the width is smaller than the native resolution width, the
texture cache targets are removed on every Vsync signal, causing a
black screen issue.
- The texture cache code needs a 1 returned for the custom resolution
upscale multiplier or there'll be some really funny graphical issues.
It also removes unnecessary GetConfig (which I think unconditionally
does a a file read on Windows) calls if the width was increased - the
upscale multiplier is already stored, and the custom resolution width
and height calls are now unnecessary.
Also fix some whitespace issues.
Before this patch, when recording Progressive (frame) mode, it recorded all
the frames correctly but set the clip's fps property to 25/29.97, so when
played back it played at half the speed (but was fine when played at double speed).
This patch does not affect the number of frames recorded per second, but rather
only sets the resulting clip fps property to the correct one (double than before).
Also fixes a bug that in a non-managed window in progressive mode, the title
displayed "200%" speed when it should have displayed 100% speed.
Fixes#832
upscale_multiplier function values have been changed to allocate native resolution and also move custom resolution to 9.
Remove the old native checkbox value and include Native in the combo box.
Internal GSDX functions have also been updated with this new update to the upscale_multiplier variable.
* Greatly reduce the number of clut read (factor 10x)
* Avoid to get wrong TEXA texture in the cache.
* Fix "jump depends on uninitialized variable" Valgrind warning.
Fix#748
I try my best to avoid any breakage of DX but please test it too.
* add lengthly comment to explain the format
* Likely reduce the number of shader permutation
* Avoid slow AEM (on GPU)
Expect regressions because TC needs some fixes
v2: fix palette mode
CID 146833 (#2-1 of 2): Division or modulo by zero (DIVIDE_BY_ZERO)
divide_by_zero: In expression this->m_width / this->m_upscale_multiplier, division by expression this->m_upscale_multiplier which may be zero has undefined behavior.
CID 146835 (#1 of 1): Division or modulo by float zero (DIVIDE_BY_ZERO)
50. divide_by_zero: In expression (float)(end - start) / (float)frame_number, division by expression frame_number which may be zero has undefined behavior
Add 2 new shaders:
* ps_main12: cast a 16 bit depth to a RGB5A1 color
* ps_main16: cast a a RGB5A1 color to a 16 bit depth
Shader might be used in future commit as it seems Silent Hill uses this
kind of format.
Fix tab/indentation too
Add tooltips to Windows GUI. Fixes#578.
Rearrange Window GSdx GUI a bit.
Reformat tooltip descriptions to be both Linux and Windows (un)friendly.
Add new tooltip descriptions.
Fix Windows Lilypad local volume control GUI checkbox.
Make MicroVU E-bit delay slot warning a Dev warning.
Don't minimise GS Window if main window is minimised.
For Linux and Windows, add tooltip descriptions for AF, AA1, extra
rendering threads, Enable Shade Boost, FX Shader/External Shader, FXAA.
For Windows, also add Alpha Correction and Logarithmic Z tooltips.
For Linux, add software mipmap tooltip.
Thanks to tsunami2311, ssakash, gregory38 and whoever did the wiki for
helping with descriptions.
The hack description box messages were replaced by tooltips on Windows,
so there is no need for the first line in the description to refer to
the hack anymore.
3-state checkboxes were also converted to comboboxes, so remove any
references to checkbox states.
Reformat the descriptions so it looks okay on both Windows and Linux.
Could be better, but I'm out of ideas.
Also fix a few typos and missing punctuation.
Changes the three-state checkboxes to comboboxes.
Removes the hack description box.
Hides Alpha and Alpha Stencil when OpenGL is selected.
Rearranges the hacks dialog.
This moves the hardware, non-renderer dependent options to the top and
makes the renderer options visible only when it affects the current
renderer.
The texture filtering checkbox has been changed to a combobox and now
uses the same description as Linux does.
Also changes the Title to GSdx Settings.
The purpose is to avoid issue on MS-Intel driver without
a dedicated hack in the compilation.
Code doesn't use it so I suspect others implement to discard the
statement.
The CRC hack option is always used regardless of whether the HW Hack
checkbox is ticked. Move it to the main gsdx dialog and make it use the
same descriptions that are used in Linux.
And fix the accurate_blend_unit whitespace formatting.
It claimed to be 1.7.1 but it had a mixture from various
versions. It was hard to update as everything in the top directory
so I used upstream's way to organize files. I renamed include to
soundtouch since I did not want to #ifdef that for windows.
.
Wavfile.h is a private header so I used the private path instead of
moving the file over. This changed 3 files in the plugin folder.
according to some of the internal functions in GSDevice files, Anisotropic Filtering is only done when paltex is disabled. do the same on the GUI for user awareness.
Removes the checkbox of Anisotropic filtering from the GSDX plugin settings, the checkbox was usually used to enable & disable the AF which is not necessary since there is an option in the drop down list for disabling AF.
the internal function value of "AnisotropicFiltering" has been replaced with "MaxAnisotropy" for detection.
the detection uses the function getconfig("MaxAnisotropy", value) where value 0 means disabled and value is the default value when no value is set in the INI file.
I went a bit of trigger happy since compiling so much is not fun. Changes:
Solution
- Remove all SSE2/SSSE3/SSSE4/AVX/AVX2 configurations. Not used.
- Remove wxAdv3.0 and x86emitter. Compiled but not used.
- Make sure Release compiles Release.
- Make sure Debug compiles Debug.
- Make sure Devel compiles Release or Devel.
- Make sure nothing get skipped.
- Do the last 4 for the x64 build.
.
CDVDolio
- Remove SSE2/SSSE3/SSSE4/AVX/AVX2 configurations. Not used.
- Remove props. Cruft.
- Remove _M_SSE from stdafx.h. Pointless and only reference to it.
xpad
- Remove SSE2/SSSE3/SSSE4/AVX/AVX2 configurations. Not used.
- Remove props. Cruft.
- No reference to _M_SSE.
.
Only GSdx uses _M_SSE.
- Remove *.mo. Not needed.
- Add *.aps and delete USBqemu.aps.
- Don't ignore asm files.
- Ignore the cmake obj-i586-linux-gnu build folder in Linux.
- Fix the regex pattern for /bin/pcsx2*
- Don't ignore the changelog of libjpeg.
- portaudio line not needed and ignored vcxproj/props/etc.
- update to the new rcdefs.h location
- Don't ignore pcsx2/gui/Resources/EmbeddedImage.h
- Remove autogenerated file plugins/dev9ghzdrk/Win32/postBuild.cmd
- Simplify lines using '**' or '*.exe'.
Remaining issues:
$ git status --ignored
Ignored files:
plugins/CDVDiso/src/mkiso/mkiso.dsp
plugins/CDVDiso/src/mkiso/mkiso.dsw
.
These can be deleted.
It could not find dxguid.lib since it was only available for Release.
.
This should go on a prop but that is a different PR.
.
I also fixed it for x64 while I'm at it.
- zerospu2: include stdint.h in Windows. (VC2012+)
- CDVDolio: Remove hash_map (not used, VC2015+)
- zerogs: Fix extern and link to utilities. (VC2012+)
- zzogl: Port windows part to wx30. (VC2012+)
I: pcsx2: spelling-error-in-binary usr/lib/i386-linux-gnu/pcsx2/libGSdx-1.0.0.so allows to allows one to
I: pcsx2: spelling-error-in-binary usr/lib/i386-linux-gnu/pcsx2/libGSdx-1.0.0.so Allow to Allow one to
.
Apparently lintian checks grammar too (most common ones).
The Wild Arms Offset hack can only be on or off. There is no third
state. Convert the three-state checkbox into a two-state checkbox, fix
the description and remove a leftover.
Intially GSBlendStateOGL was an alias of the m_blendMapD3D9 array
The object was replaced by an index in the array. Save 2k of memory duplication.
And too much useless code.
v2: push/pop blending state in DATE stuff
v3: remove m_state which is useless now
I used to disable the RT but it doesn't work well with 50cents. It seems
texture writes weren't propagated correctly to the depth buffer. Besides
the game write an alpha value whereas depth is 24 bits only...
Commit message edited by Gregory.
Comment below from Jonathan Li
On my system, /dev/input/event13 (evdev interface) and /dev/input/js0 (joystick interface) correspond to the DS3 on my system. User/group ownership are both root.
With /dev/input/event13 at 0640 and /dev/input/js0 at 0644 - SDL2 detects no pad, SDL1 detects a 19 button, 27 axis pad
With /dev/input/event13 at 0666 and /dev/input/js0 at 0644 - Both SDL1 and SDL2 report a 19 button, 4 axis pad.
SDL2 only uses the evdev interface, SDL1 uses the evdev interface but if that fails, it uses the joystick interface.
The purpose is to emulate correctly destination alpha factor
An alpha channel of 128 is 1.0 in the GS but only ~0.5 in the GPU
I think few draw call use destination alpha so impact on perf must remains small.
Actually it can partially be done with GL_ARB_shader_image_load_store
extension. However all drivers that support shader_image have
texture barrier too.
The idea is to use a floating texture to accumulate the data and
then do a final postprocessing pass to apply the modulo
v2:
* use bounding box to
* fix vertex corruption issue
* use negative number in shader which allow to use half float (+12
fps@4x)
Previous CopyRect function does a memcopy without conversion.
This function will allow to use different format for input/output. Just a
possibility for the future
Basically the code does the alpha multiplication in the shader therefore
the blend unit only does a pure addition. This way the multiplication is
accurate and accurate_blending doesn't requires a costly barrier.
This code also avoid variable duplication to make the code more separated.
Hopefully blending can be done in a separated function
It is preliminary work to support fast color clipping with HDR
v2: fix assertion compilation failure
v3: fix regression in not accurate mode
v3: Cs * As/Af is not an accumulation
Those cases don't need the Cd addition and were already optimized anyway
Fix a regression on GoW2
Do DATE algo selection before blending. This way we can detect bad
interaction.
Regroup all blending/colclip in a single block. Avoid to check abe &&
rt multiple times.
v2: only enable sw blending when abe is true
The updated medium level will run for all sprites. It helps sotc blooming effect and it remains
fast enough to be enabled by default (at least on 3D games)
The new high level will run for all sprites + color clipping
The idea is that sprites are often use for post-processing effect (ofc except 2D games)
Most of the time post-processing supports SW blending with a small speed penality. SW
blending is more accurate so it is better to use it.
Sourceforge was dead for more than a week therefore add the license
information. I could not find the original TGM source (dead link) so I'm not
even sure if this still applies or if the glsl was totally rewritten. None
of the glsl files have a copyright header so it's hard to tell.
Gain: 1% at 4x on SotC (it partially compensates recent additions)
When the color is constant and equal to 128, the MODULATE mode is
equivalent to the DECAL mode. It saves 5 instructions on the FS.
Accurate options do a better jobs. Technically it can still
be useful for old gpu/driver that doesn't support the GL4.5 extension.
On Windows, you can still rely on Dx
On linux, free driver support it (except Intel)
It fixes the bad light on Silent Hill with the SW renderer.
Full story
if Q is NaN, m_vt.m_eq.q becomes wrongly true
/Q will wrongly be optimized in the "Vertex Shader" of the SW
Note: Add an assert for the STQ handler
Code path is quite hot so no need to add extra check for nothing
GS uses integer value and does integer operation too.
This commit trunc the sampled texture, the interpoled fragment color
and the product of the 2.
It impacts negatively the perf of about 3/4% (GPU) but it fixes rendering on
suikoden and potentially some others games too.
Code was completey bitrotten
Code was a partial test (and yet 500 lines already)
Shader is more and more complex and multithreading support greatly
reduce the cost of shader switch
Nvidia allows to get the ASM of the shader of the compiled shader. It is useful
to check the performance.
It also allow me to compile most of shader code path for QA
Dump is enabled in linux replayer + debug_glsl_shader = 2
Code is not yet enabled because it requires extensive test
The idea is to replace point by a 1 pixels sprite with the help of
a geometry shader. In 4x, point will be replaced by a 4x4 sprite.
Partially invalidate RT when there is a write in the middle of it (actually 2 pages below)
Code is not yet enabled because
1/ I want to stabilize latest update
2/ not sure of the impact of the code
3/ maybe it need a more generic version
Frame is always 32 bits but game can reuse it later as a 16 bits RT.
Fix half screen issue with Ricky Ponting Cricket
Unfortunately it triggers texture shuffle wrongly. I hope there is no
regression.
Fix depth issue.
First issue: RT and Depth are located at the same address.
=> solution, just lookup the depth (done for any games)
Second issue: Instead to draw a X,Y rectangle, they draw a 32 pix, 4096 pix
rectangle with a FBW of 1.
=> solution, don't bother just write the depth directly
Please someone add some CRC to enable the code
// GL42 interact very badly with sw blending. GL42 uses the primitiveID to find the primitive
// that write the bad alpha value. Sw blending will force the draw to run primitive by primitive
// (therefore primitiveID will be constant to 1)
It is mostly the texture shuffle effect which is now emulated correctly on openGL
They remain in the Dx level as speedhack in particular for
* Castlevania;
* GodOfWar;
* StarOcean3;
* ValkyrieProfile2;
* RadiataStories;
Remove old commented hack: Drakengard2, ArctheLad, ReZ
Separate hacks that are only enabled in aggressive mode
It might save a couple of fps
Add a define to test the perf if we keep only the blue channel. It brokes
the code in Prince Of Persia that use the Red/Green channel... Maybe the
speed hack :( Or find a way to replace all if with a lookup table
Note: it is only supported on OpenGL currently
Code unscale the texture to ease the conversion. Quality is awful (same as before)
but I'm not sure we can support an upscaled texture
Maybe the quality loss is due to the reduction without mipmap
Maybe the best solution will be to add an hack to extract the blue channel
(with texture swizzle), and uses a "full page/screen" spirte instead.
(it would be faster too)
Note: won't be compatible with MSAA (but gl doesn't support it anyway)
// In theory new textures contain invalidated data. Still in theory a new target
// must contains the content of the GS memory.
// In practice, TC will wrongly invalidate some RT. For example due to write on the alpha
// channel but colors is still valid. Unfortunately TC doesn't support the upload of data
// in target.
//
// Cleaning the code here will likely break several games. However it might reduce
// the noise in draw call debugging. It is the main reason to enable it on debug build.
//
// From a performance point of view, it might cost a little on big upscaling
// but normally few RT are miss so it must remain reasonable.
Game can directly uploads a background or the full image in
"CTRC" buffer. Previous code was a full black screen.
It will also avoid various black screen issue in gs dump.
hidden option: preload_frame_with_gs_data
Note: impact on upscaling was not tested and it's likely broken
Improve the rendering in MGS3 (even if the game is still broken
due to others TC issues)
// Typical bug (MGS3 blue cloud):
// 1/ RT used as 32 bits => alpha channel written
// 2/ RT used as 24 bits => no update of alpha channel
// 3/ Lookup of texture that used alpha channel as index, HasSharedBits will return false
// because of the previous draw call format
//
// Solution: consider the RT as 32 bits if the alpha was used in the past
Gregory Hainaut