Prior to this commit it was possible to assign the same keycode to more than one button.
ie. Say I assigned Open with the hotkey Ctrl+O; well, it was possible to also add it to another function as well, which leads to hotkey clashing.
Now, say I assign Open with Ctrl+O, but then assign that same hotkey to Refresh List; it will unbind the hotkey from Open and then assign it to refresh list.
This branch is the final step of fully supporting both OpenGL and OpenGL ES in the same binary.
This of course only applies to EGL and won't work for GLX/AGL/WGL since they don't really support GL ES.
The changes here actually aren't too terrible, basically change every #ifdef USE_GLES to a runtime check.
This adds a DetectMode() function to the EGL context backend.
EGL will iterate through each of the configs and check for GL, GLES3_KHR, and GLES2 bits
After that it'll change the mode from _DETECT to whichever one is the best supported.
After that point we'll just create a context with the mode that was detected
add the GL include (back) to Base.props
use a similar technique to GLX.cpp (by Sonic) in WGL.cpp to get
wglSwapIntervalEXT without the WGLEW check
Conflicts:
Source/Core/VideoBackends/OGL/OGL.vcxproj
Source/Core/VideoBackends/OGL/OGL.vcxproj.filters
Source/VSProps/Base.props
MemArena mmaps the emulated memory from a file in order to get the same
mapping at multiple addresses. A file which, formerly, was located at a
static filename: it was unlinked after creation, but the open did not
use O_EXCL, so if two instances started up on the same system at just
the right time, they would get the same memory. Naturally, this caused
extremely mysterious crashes, but only in Netplay, where the game is
automatically started when the client receives a broadcast from the
server, so races are actually quite likely.
And switch to shm_open, because it fits the bill better and avoids any
issues with using /tmp.
This removes the redundant code and also implements this feature for OSX and Wayland.
But so it's dropped for non-wx builds...
imo DolphinWX still isn't the best place for this, but now it's in the same file as all other hotkeys. Maybe they'll be moved to InputCommon sometimes at once ...
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
This implements a partial JITIL based off of the JIT64IL. It's enough to run most games, albiet at a slow speed.
Implementing instructions for this IL is really simple since it basically is just enabling based on what is already in JIT64IL, and then enabling each individual IL instruction.
if the exe directory and the save directory had the same prefix, .../dolphin emulator/... and .../dolphin/... the path would previously have been incorrectly changed
- Don't use %lu for size_t; they're different on Linux x86.
- has_warned_about_drivers is only used on win32, so only declare it
there to avoid a unused variable warning.
Dolphin is obviously not marketed as being for educational purposes
only, and claiming otherwise in the about screen would not have any
legal weight, so don't insult everyone's intelligence.
(This is currently pointless, as the code in question is not used on OS
X anyway, but I'd like to see that option come back. In any case, fixes
the warning)
saves like super smash bros brawl, mario kart, etc which use simple copy restriction via the banner file are now able to be imported natively with the wii/wiiU system menu
save files which include subdirs are correctly packaged
NOTE: saves which include 'nocopy'/'nomove' folders will likely always require homebrew
adds feature to export all wii saves
- Make "copy data into bundle" depend on the files actually being
changed, rather than being run on every build.
- postprocess_bundle depends on system files and checking the Dolphin
binary and all that, and would be iffy to try to avoid rerunning;
but it's only needed to produce a redistributable bundle, so add
SKIP_POSTPROCESS_BUNDLE to skip it for development.
Use strings internally, use a multimap and std::function for callbacks (instead
of a flat vector + loop over the vector to find the right callback type), fix
coding style issues. Simplify MainAndroid code a bit.
Pad mapping and the UI behind it is significantly confusing,
and has been confusing users since NetPlay was introduced.
As part of a large code cleanup to help NetPlay more stable,
introduce a better pad mapping system where local pad mapping
is handled by the client. Now, all the server and other
clients know is which player have which controllers, and the
clients only know this so they can show the pad mapping in the
UI; they don't do anything else with it.
A future cleanup will use this pad mapping data to completely
ignore the pads configured in the settings pane on the host.
remove copy protection bit from banner
- should allow *some* copy protected games to be moved to a real system;
ex: super smash bros brawl, mario kart
games with a nocopy/nomove folder cannot be imported to a real system without using homebrew tools, warn for these saves
ex: guitar hero
remove some unneccessary class fields
the class is still incredibly ugly :(
If we don't do this, then when the game starts we'll send out the
buffer size to clients being a super large value of junk, and they'll
hang forever trying to accumulate an input buffer a size that they'll
never ever reach in a million years.
This never manifested in release builds for some reason.
This should be transparent, but it may cause regressions.
The idea here is that now all players, including the host of the server,
talk to the server through TCP/IP networking. This significantly reduces
our codepaths through netplay, and will prevent strange local-only bugs
from happening.
The cleanup isn't 100% finished yet. The NetPlay dialog still drives the
server through private APIs. I eventually want to sanction off the server
entirely, so all communication is done through TCP/IP. This will allow us
to have high-traffic public servers that can relay multiple games and
lobbies at a time, and split off channel and game management to people
other than the host.
This is all still just a pipe dream, though.
Feedback is in logs as suggested by skid_au. The checkbox is still there, but
mostly for people who would like to opt out (unfortunately, I can not be sure
how this feature may behave for some routers - there's a hell of a lot of bad
UPnP implementations.)
The Visual Studio stuff is a little messy, so I apologize if anything is a bit
off. I tested most configurations and it worked.
I also tested CMake on Debian Wheezy, Ubuntu Saucy, and Mac OS X Mountain Lion.
All seemed to be OK.
Also keep a PNG version of bin2c'd resources in order to make these kind of
changes easier in the future.
Fixes recent versions of libpng complaining loudly about our images.
Modify the buttons and editor interface for the new expression
language, like the new op name for add, the new device name syntax,
and add new editing features, like simple selection behavior on
unary ops.
The Cheats manager should be updated when the ISO is changed because it's non-modal
Removing code that read the ID from file because the cheats manager only has a use when an emulation is running (when the ID doesn't need to be read from the ISO again because it's in a variable). This fixes loading Gecko codes for .wad during an emulation because "VolumeHandler::GetVolume()" return false in this case
Before this commit, nothing would would be displayed in the "Frames to Record" text control.
This fixes that by setting it to what m_FramesToRecord is initially set to, which is 1 (at the time of this commit).
Example (in step by step explanation):
1. Run Dolphin.
2. Go to Tools -> Fifo Player
3. Go to the Record tab and hit record and then stop without a game loaded.
The button is now disabled and will not become active again for the whole time that Dolphin is running. Dolphin must be closed and then re-opened in order to use it again. This fixes that.
I've tested it with multiple conditions to make sure this doesn't beef anything else related to the Fifo Player.
ie)
- Record then Stop without a game loaded (multiple times)
- Record then Stop with a game loaded (multiple times, as well as testing playback. All of which work fine).
Select the dance mat via Configure > Gamecube > Port 1 > Dance Mat
The dance mat is mapped to the GC Pad:
D-Pad Up = Blue Arrow Up
D-Pad Down = Blue Arrow Down
D-Pad Left = Blue Arrow Left
D-Pad Right = Blue Square
Y Button = Orange Arrow Up
A Button = Orange Arrow Down
X Button = Orange Arrow Right
B Button = Oranage Square
Load by timestamp: load last state is expanded from 1 to 8 actions, for newest to oldest state
Save by timestamp: overwrite the oldest state (or use an empty slot if available)
Adding remaining hardcoded state keys to hotkey dialog
Adding a program exit hotkey
The "Download Codes (WiiRD Database)" button is enabled (and its click return silently without an effect) when "Tools → Cheats Manager" is opened when there's a running emulation for which there's no "[Gecko]" ini section, confusing the user about the reason for not downloading codes or showing an error when there's no running emulation
Solution
when there's a running emulation: fix the button
when there's no running emulation: disable the button (to indicate to the user that this button must be clicked elsewhere, in the ISO settings dialog, the user will realise or remember)
* VBeam-fix:
Renamed the VBeam variable for clarity.
Fixed VBeam emulation in interlaced mode, removing the hacks in the audio timing. Fixed VBeam emulation in progressive scan mode. Retained the old VBeam speed hack. This option has now been switched so that the accurate behaviour is on by default and the speed hack (inaccurate behaviour) is enabled when the option is checked.
Also, some tab/space mismatches removed from VideoOGL, and some places I missed in VideoDX[number] projects.
Now, the Core is literally the only project with tab/space mismatches (on a large scale).
Fixed VBeam emulation in progressive scan mode.
Retained the old VBeam speed hack. This option has now been switched so that the accurate behaviour is on by default and the speed hack (inaccurate behaviour) is enabled when the option is checked.
Also fix up the dangling else's. Shit just looks incredibly ugly in terms of actual structure in the code.
I took the liberty of adding comments in FifoPlayerDlg.cpp, LogConfigWindow.cpp, LogWindow.cpp, and FrameAui.cpp to better explain some things.
If any comments are wrong, don't hesitate to complain.
GC and Wii games using the AX UCode should now work almost perfectly with DSP
HLE. If you get any issue, make sure the "DSP on dedicated thread" option is
disabled, and try setting framelimit to "Audio".
As a side effect, DSP HLE should not desync anymore (making it usable in
netplay and TAS) with AX games.
Conflicts:
Source/Core/Core/Src/HW/DSPHLE/UCodes/UCode_AX.h
Source/Core/Core/Src/HW/DSPHLE/UCodes/UCode_AXWii.cpp
This commit mainly elaborates on some messages a little more. Also fixes some typos that slipped through the last commit.
A large change in text can be seen in EXI_DeviceMemoryCard.cpp. I added more info as to why a write to a memory card may fail. (This actually was a reason I was unable to write to a memcard recently).
Elaborations can be seen in WGL.cpp
I did change some comments in some files that I was correcting logging messages in, however this is only if I spot a typo or if an abbreviation is lower-cased. Even in that case, the amount of changes done to comments is very minimal.
Merge an endless story. The branch name is a lie, it was started as glsl, but now it is a complete reworked opengl3 backend.
It just began with simple changes which aren't supported on osx.
They either support ogl2 OR ogl3 core, but mixing isn't allowed.
As the branch name says, the vicious circle starts with GLSL, but just implementing one wasn't possible either:
- OSX supports only GLSL100 which doesn't support our shaders.
- Vertex Array Objects are needed for ogl3, but not supported on ogl2
- immediate mode isn't supported any more, so we must implement vertex buffers
- uniform buffers are recommended as else we would need tons glUniform
- postprocessing shaders have to be converted to glsl
- lots of smaller outdated issues and bug fixes :-)
Thanks at all for testing and at Sonic for converting all of our shaders to glsl130
And sorry for all upcoming bugs...
# By skidau (30) and Pierre Bourdon (1)
* FIFO-BP: (31 commits)
Set g_bSignalTokenInterrupt on the main thread. Fixes the random hang in Harry Potter: Prisoner of Azkaban.
Used a scheduled event to generate the ARAM DMA interrupt if the DMA is greater than a certain size. Fixes NFS:HP2 GC.
Bumped up the disc transfer speed enough to prevent audio stuttering in Gauntlet: Dark Legacy.
Enabled Synchronise GPU on "SPEED CHALLENGE - Jacques Villeneuve's Racing Vision". Required to go in-game.
Added direct GameCube controller commands to the Serial Interface emulation. Fixes the controls in MaxPlay Classic Games Volume 1 and the Action Replay disc.
Increased the FIFO buffer size to 2MB from 1MB. Fixes Killer 7's Angel boss.
Used an immediate GenerateDSPInterrupt when transferring data from ARAM to MRAM and a scheduled DSP interrupt when transferring data from MRAM to ARAM.
Fixes the audio cutting in and out in the Resident Evil GC games using DSP HLE. Triggered the ARAM interrupt by the scheduler instead of directly in function.
Implemented proper timing for the sample counter in the AudioInterface, removing the previous hack. Cleaned up some of the audio streaming code.
Skipped the EE check if there is a CP interrupt pending.
Disabled "Speed up disc transfer" from the ZTP GC game ini.
Removed the disc seek times for GC games and removed the disc speed option on Wii games. Checked for external exceptions only in mtmsr.
Delayed the interrupts in the EXI Channel.
Merge aram-dma-fixes (r76a13604ef49b522281af75675f044d59a74e871)
Added a patch that bypasses the FIFO reset code in Wallace and Gromit: Project Zoo, allowing it to go in-game.
Made vertex loading take constant time.
Increased the cycle time of the vertex command. Fixes "Speed Challenge: Jacques Villeneuve's Racing Vision".
Moved the setting of the Finish interrupt signal back to the main thread as it was causing Wii games like Resident Evil 4 (Wii) to hang.
Profile stores, fp stores and ps stores only to the fifo write addresses list. This should make the JIT a little faster as it will not be checking for external exceptions unnecessarily.
...
Conflicts:
Source/Core/VideoCommon/Src/PixelEngine.cpp
Some cleanup throughout related code. (try to make logic in ISOFile understandable by a human)
Encode strings in UTF-8 rather than somehow trying to determine the encoding in the GUI code.
Non-windows OSes temporarily broken.
# By Jordan Woyak (46) and others
# Via Jordan Woyak (2) and others
* master: (70 commits)
Fixes two memory leaks, one is pretty bad for OSX. Yell at pauldachz if this doesn't work. Or... say thanks.
Added a BluetoothEnumerateInstalledServices call so that the wiimote remembers the pairing.
Make ARMJit core default CPU core on ARM architecture
Fix a StringUtil regression from the arm-noglsl merge
Small improvement to cmpli/cmpi in ARMJit.
Merge latest ArmEmitter changes from ppsspp while we're at it.
Ah. I blame vim on this typo entirely.
Add disabled code for authenticating wiimotes on Windows.
Add the missing FPR cache
Buildfix.
Yell at the user if they change window size while dumping frames, and some other avi dumping stuff.
Not sure if this is the right way to handle this, but it makes the save states perfectly stable. That's all that really matters, right?
Abort loading states from incompatible graphics backends.
ARM Support without GLSL
Improve VideoSoftware save states. They are fairly stable, but not perfect. OpcodeDecoder::DoState() needs to be fixed.
Begin implementing save states to video software. Kind of works, sometimes.
Make error message for loading save state with wrong dsp engine shorter.
Abort load state if it uses a different dsp engine, instead of crashing.
Update the gameini of F-zero. Efb to Ram is no longer the default choice.
fix last commit by neobrain
...
Conflicts:
Source/Core/VideoCommon/Src/Fifo.cpp
# By Jordan Woyak (9) and others
* master:
Fixed a buffer overflow in the OpenAL buffer.
TextureCache: Fix D3D backends crashing when a game uses multiple 1x1-sized LODs.
WII_IPC_HLE_Device_FileIO: don't rebuild the filename on every operation.
Some cleanup of CWII_IPC_HLE_Device_FileIO: The real file was never kept open for longer than a single operation so there was no point in dealing with it in DoState. Saving the real path in the savestate was also probably a bad idea. Savestates should be a bit more portable now.
Removing destination on rename when source isn't present doesn't make sense. IOCTL_RENAME_FILE still might not be totally correct.
Change some CNANDContentLoader logic to what was probably intended. Kills some warn logs when opening Dolphin.
Let's not CreateDir an empty string every time CreateFullPath is used, logging an error every time.
Fix a memleak. Probably/maybe improve USBGecko performance.
Remove the core count from the cpu info OSD message. It was often wrong and not rather important.
Use omp_get_num_procs to set the number of OpenMP threads rather than our core count detection.
Bulk send TCP data to the client with the emulated USB Gecko.
Added the ability to reverse the direction of the force feedback by allowing negative range values.
Changes/cleanup to TextureCache::Load and other mipmap related code. The significant change is what is now line 520 of TextureCacheBase.cpp: ((std::max(mipWidth, bsw) * std::max(mipHeight, bsh) * bsdepth) >> 1) to TexDecoder_GetTextureSizeInBytes(expanded_mip_width, expanded_mip_height, texformat);
Conflicts:
Source/Core/VideoCommon/Src/PixelShaderGen.cpp
Source/Plugins/Plugin_VideoSoftware/Src/SWRenderer.cpp
immediate-removal is a new created branch seperated from master but reverted the revert of immediate-removal
so we get less conflicts by merging
* OpenAL:
Changed SoundTouch to use float samples, allowing SSE to be used. Made the DPL2 decoder disabled by default. Re-added the audio hack used by the Accurate VBeam emulation option.
Added a latency setting to the audio settings. Removed the Sample Rate setting. It is now hardcoded to 48000hz (accurate audio timing).
Skipped timestretching if the emulator is running below 10% speed to prevent buffer overflows.
Removed the synchronisation between the CPU thread and the audio thread. Added code to detect and resume from buffer underruns. Disabled the ability to change the DPL2 option after the game has started. Fixed a memory leak that occurred in the DPL2 decoder. Fixed the OSX build.
Build fix
Added a Dolby Pro Logic II (DPL2) decoder in the OpenAL backend. DPL2 audio is decoded to 5.1. Code adapted from ffdshow. Added an option in the DSP settings to disable the DPL2 decoder in case Dolphin incorrectly detects a 5.1 audio system. Updated the OpenAL files to OpenAL Soft 1.15.1 in the Windows build.
Removed the system timing hack which was activated when the Accurate VBeam option was enabled.
Fixed the include directories in Audio Common for the Windows 32bit build.
Fixed the include directories in Audio Common for the Windows build.
Messed up the static include line
Fix include paths and compiling in Linux. Externals soundtouch is 1.7.1, while Ubuntu 12.10 is 1.6.x. Externals soundtouch is compiled with integer samples, while ubuntu is compiled with float samples. Float samples is probably the more common route. If you're going to use soundtouch, you should probably use SAMPLETYPE instead of explicitly choosing short. This probably breaks the windows build since its includes aren't setup.
OSX: typedef signed char BOOL
OSX build fix
Build fix
Added audio time stretching by using the SoundTouch library.
Implemented correct audio timing.
OpenAL for Windows initial commit
Added code to detect and resume from buffer underruns.
Disabled the ability to change the DPL2 option after the game has started.
Fixed a memory leak that occurred in the DPL2 decoder.
Fixed the OSX build.
Added an option in the DSP settings to disable the DPL2 decoder in case Dolphin incorrectly detects a 5.1 audio system.
Updated the OpenAL files to OpenAL Soft 1.15.1 in the Windows build.
Fixes issue 3023.
Depth calculations are always done in the pixel shader now.
Due to the unpredictability of our zcomploc hacks this commit probably changes the behavior of some games which use zcomploc.
To set it up, change the Port 1 controller to "Steering Wheel" under the GameCube tab. This will tell the game that you have a force feedback steering wheel connected.
In the Gamecube Pad Settings, change the Rumble Motor to "Constant".
Configure the controls:
Main Stick Left/Right = Steer Left/Right
Main Stick Up = Accelerate
Main Stick Down = Brake
Thanks to ulao for the device communications info.
- In icon retrieving I removed the "format check" as it shouldn't really matter to have mixed icon formats. Also removed the "Time splitters hack" as there's no reason for it since we are only checking the last 3 bits and I'm pretty sure having bits 1 and 2 set is the same as having them unset.
- Icon retrieving uses AnimSpeed as stop signal (every icon must have an speed set, the first speed that is 0 means there are no more icons)
- Also, in icon retrieving I added support for "blank frames"(Luigi's Mansion and Pikmin that I know of). With this the base for icon animation is complete.
- Fixed PSOIII savegame patch which was wrong before.
Signed-off-by: LPFaint99 <lpfaint99@gmail.com>
Very useful to compare performance between two builds, check the impact of
a configuration option, etc. FPS log is stored in User/Logs/fps.txt and is
reset each time you launch a game. Only enabled if you check the "Log FPS
to file" option in your graphics settings.
Could be improved a bit: currently logs only every 1s (so you can't really
see small variations), maybe output more infos to the fps.txt like
average/stddev (but Excel/Libreoffice/Google Docs can compute that easily
too).
The problem here was the logic that detects SDL in the main CMakeLists.txt
is not the same as it is in DolphinWX/CmakeLists.txt to set libraries. When
using SDL from Externals it failed at link time because -lSDL was never set.
This fixes the problem by using the same condition logic to set the libs
as used when detecting SDL in the first place.
Dolphin code already builds against SDL2 but the build system never
checks for SDL2, which is the what latest SDL is called now. SDL2
replaces SDL 1.3. This allows Dolphin to be build against SDL2, which
activates certain new features such as the haptic interface.
the intent is to replace the haphazard scheduling and finger-crossing associated with saving/loading with the correct and minimal necessary wait for each thread to reach a known safe location before commencing the savestate operation, and for any already-paused components to not need to be resumed to do so.
This allows users to easily check whether their Wii dump is corrupted or not
using the Dolphin properties window. Right click on a game, Properties,
Filesystem tab, then right click on the game partition and select "Check
partition integrity".
This may have some false negatives due to the unused clusters heuristic (see
the comment in VolumeWiiCrypted.cpp). False positives are unlikely.
This adds an "Analyzer" tab to the fifoplayer dialog which allows to conveniently browse through all register pokes that are being sent by the game each frame.
There's also a search function, but it doesn't work all that well for anything but simple searches at the moment. However, I'm merging this anyway since I'm not sure if I'm going to finish this.
Note that due to recent fifo changes, it's not yet possible to run fifoplayer in dual-core mode.
please test for regressions, speed and for other issues fixed, as a example, the black color in water splash in super mario galaxy are fixed with this rev.
please as soon as yo find a bug let me know.
to marcosvitali.
Added an external exception check when the CPU writes to the FIFO. This allows
the CPU time to service FIFO overflows. Fixes random hangs caused by FIFO
overflows and desyncs like in "The Last Story" and "Battalion Wars 2". Thanks
to marcosvitali for the research.
Added some code to unlink invalidated blocks so that the recompiled block can be
linked (speed-up).
This release still fixed the hangs produced by fifo overflow without sacrifice
performance. For example you can test Tutorial moves at the beginning of The last history now
is fluid 30/60.
Fixed possibles random hangs in DC mode.
Fixed hangs in DC mode in (Simpsons, Monkey Island, Pokemon XD, etc)
Implemented accurate management of Pixel Engine Interrupts. Now the GPU loop
is stopped when a PE Interrupt needs to be managed and resumed when Pixel Engine
finish.
Fixed Metroid Prime 3 and 2 desync. And other games with desync because of
FIFO Reset. That happens because FIFO_RW_DISTANCE_HI must be written first, for checking
fifo.CPReadWriteDistance == 0, so some fifo resets was not managed in the right
way.
Fixed Super Monkey Ball in some cases when the game write the
WriteReadDistance need to be safe like the SafeCPRead.
Improved the CheckException for the GatherPipe writes in JIT, now only the
External Exceptions are processed.
Fixed definitely Pokemon XD in dual core mode. This game is doing something
not allowed. It attach to CPU the same fifo attached to the GPU in multibuffer
mode. I added a check to prevent overwrite the GPU FIFO with the CPU FIFO. If
the game do that on breakpoint the solution can fail.
Fixed ReadWriteDistance calc when CPRead > CPWrite.
Added Token and Finish cause to GP Jit checking.
Additional cleanup in CommandProcessor.
Fixes issue 5209
Fixes issue 5055
Fixes issue 4889
Fixes issue 4061
Fixes issue 4010
Fixes issue 3902
(Just applied to FrameTools.cpp for now)
Allows one to properly restart Pokémon by hitting play :P
Ignore non-ASCII strings passed to DisplayMessage(). These strings would end up going to renderer display and statusbar/titlebar, which can't handle them properly.
Commit 9ddb67d4a9 seems to have
introduced a segfault on Mac. The issue is that it this change casts
wxConvCurrent (which is a wxMBConvLibc) to a wxCSConv. This is an
unsafe cast because wxCSConv has member variables, but wxMBConvLibc
does not.
In LogWindow.cpp, the constructor for m_SJISConv is dereferencing one
of those member variables, which is a dereference of uninitialized
memory!
This CL reverts to the older (non-crashing) constructor, but keeps the
behavior the same.
Fixed the JIT cache, invalidating one instruction length at a time.
Fixed a bug where the JIT cache did not get invalidated when stepping.
Disabled fused instructions in the debugger.
return std::strings instead of filling a buffer,
move gci filename generation to a function inside gcmemcard instead of the gui code
change all functions that do not modify the object to const
Conflicts:
Source/Core/Core/Src/HW/GCMemcard.cpp
Source/Core/DolphinWX/Src/MemcardManager.cpp
Signed-off-by: LPFaint99 <lpfaint99@gmail.com>
memory cards that have gaps in the fst
Conflicts:
.gitignore
Source/Core/DolphinWX/Src/MemcardManager.cpp
Signed-off-by: LPFaint99 <lpfaint99@gmail.com>
Also re - implement the emulation issues column that was reverted, make it a bit bigger since sentences need more words and delete the issues portion of the emustate tooltip since it is unnecessary now.
The "Notes" column is gone and in it's place an "Emulation Notes" column is placed (it contains the emulationissues lines from the game inis). Notes that contain useful info about the game can be seen with just a glance this way.
Fixes issue 5043.
The "dsptool" executable is not included in the bundle.
The "tester" executable is not included in the bundle and it no longer
installed on other platforms, since it is neither expected nor useful
to install unit tests.
The following changes were made:
Restricted the "-march=core2" option to i386 because the first Intel Macs
had Intel Core CPUs, not Core2.
Removed the "-mdynamic-no-pic" flag as GCC lists it as a PPC specific flag.
Removed "-Wl,-read_only_relocs,suppress" because it seems to be related
to "-mdynamic-no-pic" and I see no need for it.
Removed "-Wextra-tokens -Wnewline-eof" because they are GCC specific and
not OS X specific.
This allows us to add keys that don't exist in the CMake template.
I added the keys from the Info.plist that was generated by our SCons build
to the new template.
Previously, there was just one list of frameworks regardless of which part
of the code depended on which frameworks. Now we keep separate lists for
the Dolphin core, the Dolphin GUI and internal use by wxWidgets.
- Fixes all (I hope) BBox-related unknown pointer crashes.
- Fixes wrong BBox values with Frame Skip on (and the resulting unknown pointer crashes).
- Fixes a small oversight on the change I made to the ISO Properties dialog.
This should also be a (very very little) bit faster than the previous version.
Should fix most graphical issues with Paper Mario: TTYD and Super Paper Mario. Fixes issue 360.
Since only those two games seem to require BBox support, and as per ector's suggestion, BBox is only enabled for those two games.
BBoxes and Display List Caches don't get along too well, causing Paper Mario: TTYD to hang during certain effects where BBoxes are used. For now, I disabled DList Cache for the Paper Mario games, hopefully both will be compatible in the future.
hopefully this will be the last code change committed directly to master for a while... :/
next is cmake to replace scons on osx hopefully. pointers anyone? (soren?)
Uses a single page for configuring ALL wiimotes now.
Due to the use of wxWindow::NewControlId, this might increase our wx version requirements (irrelevant for windows users). Works fine with wx 2.8.10 at least, but the docs aren't more specific about when wxWindow::NewControlId was introduced. If anyone doesn't like this, I'll change it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7692 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix the wxMessageAlert called from non-gui threads in the WXGTK build to use the passed caption.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7678 8ced0084-cf51-0410-be5f-012b33b47a6e
Also if the OpenGL backend throw a panic alert if the RGB to/from YUYV shaders fail to compile instead of an error log. If these shaders fail to compile it should be reported. I am not sure that a panic alert should be thrown in general when any shader fails to compile (as was discussed on IRC).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7677 8ced0084-cf51-0410-be5f-012b33b47a6e
requires NG-id, NG-key-id, NG-priv, NG-sig
sorry for not fixing this sooner, I forgot that I cleared my wiis private keys before the initial commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7642 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed OnFrame.cpp/h to a more accurate Movie.cpp/h. Made some small changes that may improve movie synchronization.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7620 8ced0084-cf51-0410-be5f-012b33b47a6e
Also don't try to save and load states when the emulator is not running. This should fix most of issu 4600.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7607 8ced0084-cf51-0410-be5f-012b33b47a6e
It turns out that this (somewhat) gets rid of memory-related exceptions which used to occur (especially) during 8-bit cheat searches. At least this is the case with my computer that has 3GB of RAM (the issue didn't seem to be caused by 100% of RAM usage, however).
Hopefully you'll be able to perform the following steps without errors now:
1. Open any game in Dolphin;
2. Go to Tools->Cheats Manager, and open the "Cheat Search" tab;
3. Preferably set the "Data Size" to 8-bit (the smaller, the more initial search results);
4. Press the "New Scan" button;
5. Use the "Unknown" search filter (which won't narrow the results down at all);
6. Press the "Next Scan" button.
(oh, and fix a typo in a comment I introduced in r6791 :p)
Anyway, make sure to tell me any eventual errors/regressions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7596 8ced0084-cf51-0410-be5f-012b33b47a6e
Removes the ugliness that was the portable file, and now creating a shortcut or file association is less of a pain
it is still necessary to modify the file association from ".../dolphin.exe" "%1" to ".../dolphin.exe" /e "%1"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7593 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes button spacing more consistent and uses the native button order of the OK/Cancel/... buttons.
(Mostly) fixes issue 4390.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7581 8ced0084-cf51-0410-be5f-012b33b47a6e
Left unselected, dolphin defaults to nstc-u and sets ntsc-j if the iso is japanese (old behavior).
Selected, ntsc-j is forced.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7580 8ced0084-cf51-0410-be5f-012b33b47a6e
sliders being unresponsive during emulation. Fixes issue 4496.
wxw complaining about non-stock menuitem without text (sysmenu menuitem).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7579 8ced0084-cf51-0410-be5f-012b33b47a6e
- Moved display related options in the "Display" tab from the general config to the gfx config, renamed the tab to "Interface"
- Moved Wiimote related options in the "Wii" tab from the general config to the wiimote config
- Moved various other options to more appropriate places ("Set Console as NTSC-J", "Skip GC BIOS"
- Dropped "Window Size" adjustment
- Now displaying a warning if one tries to enable software rendering
- Other minor changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7577 8ced0084-cf51-0410-be5f-012b33b47a6e
changes fs getusage to return 1 additional inode to account for the directory itself
Fixes save creation for at least two games, R8XE52 (Jurassic: The Hunted), STEETR (Tetris Party Deluxe)
doesnt harm save creation in any games that i tested (about 25)
also it is now possible to boot a nand title by selecting the tmd file using File > Open
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7575 8ced0084-cf51-0410-be5f-012b33b47a6e
I believe this makes Dolphin more reliable than GCNcrypt v1.1 which seems to add (prepend) a buggy line when decrypting...
- Split lines using SplitString() once more (as done with ' ' and '-' already), instead of relying on find() and substr() and the (size_t)line variable.
- Rename some variables, use a for() loop instead of a while() loop.
- Apply the StripSpaces() function to each line before attempting to parse them as encrypted/decrypted AR code lines. Without this, lines such as "B1PD-DXRQ-GTRKM " (notice the unexpected space character) would be recognized neither as encrypted nor as decrypted, which could result in badly decrypted codes (a problem I had tried to explain here: http://forums.dolphin-emulator.com/showthread.php?pid=153532#pid153532).
- For the sake of error-checking, after pressing OK, throw a warning in the following situations: when a line of code is not in a valid encrypted or decrypted format, and whenever the resulting decrypted code doesn't contain any lines.
(did I do any mistakes?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7569 8ced0084-cf51-0410-be5f-012b33b47a6e
when nand root is changed the current sysconf is saved,
and the sysconf in the new location is either loaded (if exists)
or the default sysconf is created
wii menu item is updated when the root changes
small fix to saving gamelist paths to .ini paths that are removed from the gui are now removed from the ini instead of simply changing the number of paths
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7555 8ced0084-cf51-0410-be5f-012b33b47a6e
So, clarify this by rewriting the "tooltip" for the Free Look option. This should close issue 2882 and its duplicates.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7546 8ced0084-cf51-0410-be5f-012b33b47a6e
add ticket to CNANDContentLoader
move wad installer to CNANDContentManager
system menu can now be launched from a wad file without being installed first, (return to system menu from another title will still only work if system menu is installed)
cdb.vff: flushed to disc immediately, creates if the file exists but is too small, moved creation to Boot_WiiWad
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7530 8ced0084-cf51-0410-be5f-012b33b47a6e
now if you install the sysmenu from a wad in the gamelist the menubar will be updated with the new sysmenu version
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7528 8ced0084-cf51-0410-be5f-012b33b47a6e
Saving a state that is not recording over one that was will now delete the old recording. Fixes trying to record with the wrong savestate.
Fixed some compiler warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7505 8ced0084-cf51-0410-be5f-012b33b47a6e
- Introduced a description text field (!!)
- Fixed ALL setting descriptions
- Various other string changes
- Removed the projection statistics setting
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7488 8ced0084-cf51-0410-be5f-012b33b47a6e
- added a "Hacks" tab for everything which speeds up emulation
- regrouped stuff in a more sensible way
- Renamed some options to be less confusing.
- by disabling ALL checkboxes, you'll get the most accurate / recommended configuration now
- Merged the ATC options to a single slider with 4 values (with the rightmost being "ATC off")
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7486 8ced0084-cf51-0410-be5f-012b33b47a6e
- fixed a problem/crash which occurs with some gcc versions (in general on Linux systems, issue 4400)
- other minor GUI changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7472 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix a minor icon issue in the game properties dialog.
Use a little hack to deal with spaces in file names. Need to find a better way to deal with this.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7470 8ced0084-cf51-0410-be5f-012b33b47a6e
Also move the primary translation pot file to the external repository to facilitate updating translations when strings in the code are changed. Now the only time the primary dolphin repository needs to be changed for translations is when a new language is added.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7438 8ced0084-cf51-0410-be5f-012b33b47a6e
- Added final support to string type (planned implementation reaches 100%)
- Added support to post processing shaders (OpenGL backend)
- Code Maintenance:
- Reorganized the class hierarchy
- General polishing... deleted some redundant code
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7437 8ced0084-cf51-0410-be5f-012b33b47a6e
+ Added "Reset To Default" functionality for per-game profiles.
- Solved a window centering problem that occured during switching between Default Profile and a Per-game Profile.
+ Added final & complete support to reflect changes on the fly and real-time in all cases (even when you edit Default profile).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7416 8ced0084-cf51-0410-be5f-012b33b47a6e
Ryan Houdek