Clean up of the input selected for the opengl x window in linux.
Fix a potential segfault when taking a screenshot (happens consistently when using "Save Targets" from the video debugger window).
Fix a memory corruption error that results from the wrong image size being passed when dumping textures.
Make the screenshot hotkey configurable.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6067 8ced0084-cf51-0410-be5f-012b33b47a6e
Remove a member variable which I introduced in r5907 although it never actually got used. Restores binary compatibility (at least in that regard) to pre-r5907 video plugins, but breaks any binaries after that :P
Update FIFO watermark tightness recommendations. 1000 is quite a high value I guess, but some people seem to need it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6060 8ced0084-cf51-0410-be5f-012b33b47a6e
The code changes disable the usual pipeline flush for certain BP Writes that occur while the minimap is being drawn in Zelda: twilight princess. This significantly increases speed while in hyrule field. The way this is accomplished is described more in depth on page 42 of Xtreme's thread. Big thanks to Xtreme for doing a great job hosting that thread, and Kiesel-stein for initial work on the hack
Also, I used the resource editor in Visual studio to generate the GUI code for the DX11 plugin, and some code appeared to be removed, although the behavior of the GUI did not seem to change. Hopefully someone more experienced with resource files (forms?) can double check that no code was damaged
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6057 8ced0084-cf51-0410-be5f-012b33b47a6e
(those originating from a thread other than the gpu thread)
glxMakeCurrent is supposed to error out when the context is
still current in another thread. NVIDIA handles that, but mesa3d errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6054 8ced0084-cf51-0410-be5f-012b33b47a6e
* Some fixes to linear interpolation
* Adds interpolation to ADPCM samples
* Relaxed a volume limit in ADPCM_Vol
Fixed:
- Frac rolls over one iteration before samplePos advances. Can introduce noise similar to flipping samples (1234 => 1214). Introduced oldFrac to fix this. This isn't as noticeable as it probably should be because of below.
- When samplePos doesn't advance it interpolates between two copies of the same sample which actually does nothing. Changed it to always use the current and next sample.
- When frac is 0 you should get 100% of yn2 instead of ~99% added a +yn2 to balance it.
Other changes:
- Added linear interpolation for ADPCM. Sounds like a good idea.
- Set ADPCM_Vol to clamp to x8000 instead of x4e20. Some games will play some sounds at x8000 volume anyways since the volume is applied before this. Lower limit can result in quiet music (x4e20) but some loud ambient sounds (0x8000).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6041 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix modality for the config dialogs on windows.
Fix the compress/decompress dialog wxString issues for MacOSX (hopefully).
Fix the DSP-LLE debugger for linux.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6031 8ced0084-cf51-0410-be5f-012b33b47a6e
is required to correctly link with C++ libraries like wxw.
Tell OS X that the user is doing something when using the wiimote
so that the screensaver doesn't come on when playing a Wii game.
Replace unnecessary floating point with integer math.
Remove unnecessary <sys/stat.h>'s.
Correct a few type nits.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5995 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix an issue that prevented the code window settings from taking effect on application start. (Thanks shuffle2, skid_au, and sanchez).
Fix a potential segmentation fault with the DSP-LLE debugger window.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5988 8ced0084-cf51-0410-be5f-012b33b47a6e
Don't rely on trailing /'s in directory names.
Destdir only works for global builds.
Only tar up global builds if they are in a destdir to
avoid SCons eating all available memory indexing /usr.
Print current status of shared_foo in 'scons -h'.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5966 8ced0084-cf51-0410-be5f-012b33b47a6e
The new default wiiuse wiimote read timeout of 30ms has been overridden previously by the default 10ms from the wiimoteplugin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5965 8ced0084-cf51-0410-be5f-012b33b47a6e
Of course, this doesn't do much good without another shader compiler..
WIP of OS X application bundle building.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5961 8ced0084-cf51-0410-be5f-012b33b47a6e
autoconfiguration tests. Some versions of gcc care enough about ANSI C
to complain about this.
Use the Linux install hierarchy conventions on other Unices as well.
XKeysymToString returns NULL on unknown keysyms, which is not a valid
std::string initializer.
There appears to be some disagreement regarding the second parameter
to iconv(). Some versions/installations have it as const, others don't.
Unfortunately, due to wonderful C++ brain damage, implicit conversion
from const to non-const doesn't work here.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5945 8ced0084-cf51-0410-be5f-012b33b47a6e
- More removal of unnecessary code
- Windows: Modification of Wiiuse_Find under windows,
instead of always deleting and recreating the whole wiimote_t struct, we do maintain the old one,
adding/removing new wiimotes to/from it
- some wiimote bugfixes, see below for details
Windows related stuff:
Fixed most of the disconnection issues (single and mulitple real wiimotes, both wiimote plugins) (I haven't had a disconnect msg in hours anymore(ms stack)).
Rumble bug should be fixed now(both plugins,pls verify).
Fixed some pair up issues( sometimes you had to press the pair up button up to 3 times, till it paired up your wiimote).
More dongles might be now supported via ms stack, pls try and report back!
Fixed a problem where multiple wiimotes would swap slots on pair-up/addition of a real wiimote (2-4 real wiimotes) (both plugins, but not integrated into new plugin).
Improved ingame auto-pairup for real wiimotes(thx to the new wiiuse_find routine).
Fixed a bug on setting wiimote timeouts, which means changing the timeout was just a dummy earlier.
Most of the stuff concerns stuff in the old wiimote plugin, dont worry, in the end it's important for both plugins. It will get ported to the new plugin sooner or later.:')
Some minor stuff.
This might break osx/linux build and maybe the new plugin realwiimote-wise only. Thx to glennrics to pointing me to some breakings on linux, I didn't fix them all.
PS I hope i haven't forgotten anything, enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5940 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a DSPCORE_STOP state. The DSP-LLE debugger window segmentation faults if it is openned when a game is not running.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5931 8ced0084-cf51-0410-be5f-012b33b47a6e
Should revisit and make the distinction more explicit.
Put the Data and Sys directories under Resources in the OS X app bundle.
Construct config.h (now lower-case to avoid confusion with other Config.h
instances in the tree) in the root. One tiny step towards a read-only
and cross-buildable source tree.
Some minor bits of non-Linux Unix portability.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5921 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
- fix numerous warnings
- make some variables unsigned
- remove redundant code and header inclusions
- make code more compact in lots of cases
Committing some additional changes by myself:
- additional header cleanups
- cleanup DX11 initialization/shutdown process (hinted at by avindra)
- Remove the cgD3D9 stuff from Externals since it's no longer needed
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5903 8ced0084-cf51-0410-be5f-012b33b47a6e
- Eliminate the useless check for cpu modifications option from efb to ram as it must be enabled always
- use constant names in dx11 for buffer length calculation instead to simplify code reading
- implemented scaled efb copy in opengl, still bugy in some games, the option is not in the gui but will add it when it works perfect
- Change the depth calculation behavior:
if the game use z textures is exactly the same as before.
if the game do not use z texture calculate z values in the vertex shader. the advantage id this approach is that early z culling is applied,
improving fill rate. this mus speed up things, even with ssaa and msaa enabled.
please test for regression and enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5896 8ced0084-cf51-0410-be5f-012b33b47a6e
For a typical OS X app, one only needs to specify the SDK version and the
target OS version range.
Because we use OpenCL which is new in 10.6, however, we must be somewhat
more verbose in order to make use of the forward compatibility facilities.
Unfortunately, the critical bit that is required to have binaries built
on 10.6 work on 10.5, namely disabling the new compact __LINKEDIT format,
causes stack alignment crashes at emulation time on 10.6, so for now
Leopard users still have to build Dolphin themselves.
Hopefully, this stack alignment problem will turn out to be coincident
with lingering alignment issues.
Include the OS X version of the Cg framework in Externals as with the
Windows one. The header files appear to be the same in the Windows and the
OS X builds of the February 2.2 Cg toolkit, although they are differently
munged by what appears to be some automatic process, so no new duplicates.
Any upgrades to the Cg libraries will of course need to be done in sync.
I do hope that Sonicadvance1's GLSL work will enable us to get rid of Cg.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5893 8ced0084-cf51-0410-be5f-012b33b47a6e
Use linear filtering for various buffer copies, improves visual quality a lot.
Some other tiny changes as well.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5891 8ced0084-cf51-0410-be5f-012b33b47a6e
Dynamically load a d3dx9 dll at runtime (I tested Dolphin with the first d3dx9 dll and it even worked fine there).
Should fix the flood of users asking why they can't select the DX9 plugin :P
Compilers should be able to stop bundling cgD3D9.dll now.
Minor changes in DX11.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5890 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SDL for input devices only on Windows and Linux.
(Still globally enabled for the legacy Wiimote plugin.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5886 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented new efb to ram in opengl
modified TextureConversionShader preparing the implementation of new efb to ram in dx11
please test for regressions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5874 8ced0084-cf51-0410-be5f-012b33b47a6e
Also two little changes which don't affect functionality or performance:
Change an IUnknown* cast to a T* cast.
Improve some error messages.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5870 8ced0084-cf51-0410-be5f-012b33b47a6e
are properly declared at thread entry/exit. I am leaving the ones in
Wiiuse while there's still a small hope that it may be used outside of
Dolphin, though.
Move the fixed MAP_32BIT definition for OS X to Common.h.
UDPNunchuk.cpp was deleted, so update the scons build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5864 8ced0084-cf51-0410-be5f-012b33b47a6e
fix frame dumping and screenshots in d3d9 and opengl
some improvements to the new efb to ram
please test to see if the issues introduced by the new efb to ram are solved by this commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5862 8ced0084-cf51-0410-be5f-012b33b47a6e
identifying which options and parameters go with which platforms etc.
OS X, like Windows, now no longer uses Config.h. Configure() is still
used for the wx-config parameters, but that is a temporary measure.
Globals.cpp has never been used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5860 8ced0084-cf51-0410-be5f-012b33b47a6e
using it as a constant in several places. Saves a few bytes and the time
it takes to recompile a bunch of files whenever svnversion twitches.
Using the SVN version string as an integer is not portable as the Unix
svnversion always includes e.g. the "M" suffix for a modified tree.
Windows people, please check my change to Plugin_VideoDX9/Src/main.cpp
as I don't really understand how _T() and the %hs format string work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5852 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fixed a segmentation fault caused by the UDP Wiimote stuff when a thread was not properly ended.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5847 8ced0084-cf51-0410-be5f-012b33b47a6e
replace efb to ram implementation by a hybrid approach.
explanation:
when copying from efb to texture, instead of make a copy to a texture or to the ram, copy the data to both, in hi quality to the texture and in native quality to the ram.
then instead of re-decoding the data from ram (very slow) use the data in the texture.
to improve this even more, test if the cpu has modified the data in the ram copy, if so, update the texture in memory and mark it as dynamic to avoid redundant work in future frames.
having all this implemented this is what is archived:
sms: full quality with scaled efb copies and fully functional goop cleaning :)
ztp: efb to texture speed with full map support.
nsmbw: this is a hard to emulate game, as it make a lot of shading and texture modification in cpu. it only have 35 fps in my system with new efb to ram but is 10 fps faster than normal efb to ram.
this game also show me another unimplemented feature, copy efb to multiple textures at the same time (is used to animate coins and other things in the world).
this is a remaining todo in efb to texture.
a lot of games should improve, so please test and let me know any regresion caused by this commit.
if everyone likes this the next step is, implement efb to multilpe textures and merge efb to ram and efb to texture.
then port to the other plugins.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5846 8ced0084-cf51-0410-be5f-012b33b47a6e
i made this changes trying to found the origin of the sps in zww and sms but no look so far.
the code is looking nice so commit it
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5845 8ced0084-cf51-0410-be5f-012b33b47a6e
For everyone having black screens on Windows: Try switching off MSAA, it seems to be broken (at least for me)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5832 8ced0084-cf51-0410-be5f-012b33b47a6e
Update Issue 2508
This should take care about the black screen. Please open a new issue for other problems that may arise.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5830 8ced0084-cf51-0410-be5f-012b33b47a6e
as an accident of implementation. On other platforms, an explicit call
to wiiuse_connect is required.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5825 8ced0084-cf51-0410-be5f-012b33b47a6e
Treat external data (configuration file and device names) as 8-bit data.
Character set mapping is not ideal, but at least such names can be used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5824 8ced0084-cf51-0410-be5f-012b33b47a6e
return to the old values in constants in pixelshader, the old values give mi 3 or 4 fps more,(maybe some kind of compiler optimization) in some games and with the current algorithm i notice no difference with this values, please report any problem.
optimizes SSAA to make it a little faster and, the quality should be the same but with a little speedup.
change the way the frame is processed depending is xfb is enabled or not to make this a little faster.
please test and report any problem
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5820 8ced0084-cf51-0410-be5f-012b33b47a6e
1 - Optimize pixelshadergen to avoid redundant register overflow math, with this if a game don't need this will be not applied.
this must bring some fill rate back and improve speed a little in fill rate limited systems.
2- some corrections to vertexshadergen to avoid uninitialized texture coordinates, dono if is the correct way to fix it but t least it will make house of the dead overkill playable in dx11.
the bad thing: still missing geometri in dx9, in dx11 it works exactly as on opengl.
3 - some optimization made to improve fps a little wih the latests changes made to fifo.
* back to the original code in beginfield as now it will work right.
* check for efb access more often as a lot of time is lost waiting for efb access
4 - apply a little fix for missing textures in nvidia opengl tanks to Wagnard28 for finding that nvidia does not like invalid shader id :)
please test for any regression
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5812 8ced0084-cf51-0410-be5f-012b33b47a6e
for portability.
(It is a bit unfortunate that some of the plugins have a Config.h of
their own, which can confuse this matter.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5795 8ced0084-cf51-0410-be5f-012b33b47a6e
few different variations that can be true depending on circumstances.
This would likely cover the _WIN32 case as well, but since I don't
pretend to fully understand just what is going on with wxWidgets
here, I can't really call this any less of a hack..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5794 8ced0084-cf51-0410-be5f-012b33b47a6e
Wiimotes are now slighty more responsive and multiple wiimotes should harmonize now slighty better. This clean up was requested/inevitable and should have be done way more earlier. This "might" break osx/linux builds, so please test. If your aware of any "real wiimote" issues please post it in the comments as well(dont forget to state your OS).
Known wiimote issues:
1.) Possible wiimote disconnect on pressing the home button
2.) 1-2 Possible wiimote disconnects directly after starting a game
3.) Rumble causes lag. I don't think this is a wiimote plugin issue itself, I'm not sure tho. It would be interesting to know whether the lag still happens on emulated wiimotes as well, when the game tries to rumble.
4.) Connecting(pairing up and refreshing) a 2nd/3rd/4th real wiimote while having a game running/paused, might swap player slots and cause disconnects at that moment.
If u have more issues, feel free to post them, to have them all here collected once more to get a brief overview.
Apart from that, increase the wiimote read timeout @settings(20-200). If your expecting frequent disconnects, restart dolphin, and don't open the wiimote gui before playing instead directly start games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5788 8ced0084-cf51-0410-be5f-012b33b47a6e
Dual Core sync fix.
When the FIFO is processing data we must not advance the cpu cycles in CoreTiming because in this way the VI will be desynchronized. So, We are waiting until the FIFO finish and while we process only the events required by the FIFO.
This should fix Issue 2072 .
This affect to all games in dual core mode.
Please, You can test all games with VPS limiter auto, 60, 50 depending of the game and compare with prev revision.
For example now NSMB in the video Intro has 60 fps (prev 30 fps) :D or SMG does't need anymore FPS Limitter Hack to get 55-60 fps
Beside the slowdowns now are more softly and the fps more stables because the VI sync is almost perfect.
The Core Timing and Fifo modifications are delicated. Please report if this hang any game. Don't forget check with prev revision.
Enjoy it! Thanks to Rodolfo for teach me all about dolphin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5777 8ced0084-cf51-0410-be5f-012b33b47a6e
Cleanups, documentation, ...
Theoretically enable anisotropic filtering if selected in the config, not sure if it works though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5761 8ced0084-cf51-0410-be5f-012b33b47a6e
I don't know if issue 2792 is a valid issue for dolphin. I think that is a bug in the X server implementation on those distributions of those affected. I can not replicate it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5758 8ced0084-cf51-0410-be5f-012b33b47a6e
Make font rendering a lot prettier.
Fix constant buffers in EmuGfxState::ApplyState() to really have a size which is a multiple of 16 instead of 65536.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5755 8ced0084-cf51-0410-be5f-012b33b47a6e
minor code changes and adding comments.
And issue fix 2792 with credits to Karloathian for finding and fixing it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5750 8ced0084-cf51-0410-be5f-012b33b47a6e
Remove superfluous _WIN32 checks in DX11 and DX9. Meant to port that code over to Linux or what? :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5738 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix all remaining window resizing issues.
Implement screenshot functionality (doesn't seem to work completely, yet).
Assign debug names to (hopefully) all remaining device objects.
Flush the GPU's command buffer in Close() to make the ReportLiveDeviceObjects output clearer.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5730 8ced0084-cf51-0410-be5f-012b33b47a6e
Advantages:
- easier to use
- drops our dependence on d3d10.lib, without depending on the June 2010 DX SDK
- makes finding unreleased buffers easier
- possibly more ;P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5728 8ced0084-cf51-0410-be5f-012b33b47a6e
Disable D3D10_SHADER_ENABLE_BACKWARDS_COMPATIBILITY when compiling pixel shaders in Debug configurations as well.
Properly support centered text drawing, even though it's not used, yet. Credits go to xsacha for this one.
Found an awesome hacky way to free the buffer memory used by ReplaceTexture2D. At least it gets freed at all now...
Various other tweaks to texture conversion.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5724 8ced0084-cf51-0410-be5f-012b33b47a6e
wiimotes, so that wiiuse_find has a chance to return early when that
number is found rather than wait for the 5 second timeout always.
Hide the auto-(re)connect UI elements on non-Windows so as not to
confuse users until that functionality is implemented generally.
Empty strings are not allowed in wxChoice lists.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5714 8ced0084-cf51-0410-be5f-012b33b47a6e
LZO/SFML/SOIL and subject to the same shared_foo exception options.
This makes building a self-contained distribution package much easier.
TBD: Cg and wxWidgets 2.9.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5712 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed screen clearing and simplify drawClearQuad a little
put some nice code from dx11 that i like in dx9.
modify plugin spec preparing for implementing efb poke (is not used often but is a missing functionality so..)
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5710 8ced0084-cf51-0410-be5f-012b33b47a6e
Set default video mode format to DXGI_FORMAT_R8G8B8A8_UNORM. This might fix FRAPS recording, but also decrease FPS; test both, please.
Add numerous TODOs
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5695 8ced0084-cf51-0410-be5f-012b33b47a6e
modify shader generator to produce native sm 4.0 code.
eliminate compatibility mode in dx11 so now all shader must work much better.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5691 8ced0084-cf51-0410-be5f-012b33b47a6e
Might or might not work for you, yet.
Anyway, read the soon to be created forum thread on this plugin before asking any questions.
Huge thanks to rodolfoosvaldobogado for helping me out in various areas.
Also, thanks to everyone on IRC who supported me during development ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5680 8ced0084-cf51-0410-be5f-012b33b47a6e
In the future if we merge wiimote too, this will bring the advantage that the two will be able to cooperate, to no longer fight over control of input devices which can sometimes cause problems.
Thanks shuffle2 for the patience.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5670 8ced0084-cf51-0410-be5f-012b33b47a6e
I hope I didn't break the mac+linux builds - if i did, fixing it should be a simple matter of adjusting the sconscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5661 8ced0084-cf51-0410-be5f-012b33b47a6e
- be more strict with the input signature of generated pixel shaders
- replace the D3D parameter with an API_TYPE one, so that we can further distinguish between DX9 and DX11
- for what it's worth dx11 (using vs_4_0) doesn't support D3DCOLORtoUBYTE4; added a workaround for this
- add a "dx9-" prefix to the shader cache files to avoid conflicts with dx11 shaders
Apart from that we're calling CommandProcessor::Shutdown() in main.cpp,Shutdown() now.
Delete all files in User/ShaderCache if you want to save a few KB disk space :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5659 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix: fix for lighting equations , that must improve lighting in a lot of games ( test smg :) )
experimental speedup: implemented alpha pass using stencil buffer instead of a duplicate shader. i recommend to test this well as i dono if will work the same way in all the systems. i my system it gives a nice 2-5 fps improvement. if it brings problems in any system or game will revert asap.
enjoy
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5653 8ced0084-cf51-0410-be5f-012b33b47a6e
Ideally we should be more character set aware, but at the moment we
use anonymous 7/8-bit strings in too many places.
Fix use of AddGrowable{Col,Row}. Any (non-zero) rows/columns must
have been created first by adding an item to it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5648 8ced0084-cf51-0410-be5f-012b33b47a6e
Thanks soren for the macosx fixes, this fixes the windows build and eliminates some warning from the same.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5643 8ced0084-cf51-0410-be5f-012b33b47a6e
Patch from user gamepromcompany on the MacOSX_Build wiki page.
Add support for the Mac command key as a hotkey modifier in
WXKeyToString but present it as Control. WXKeyToString is used for
both hotkeys and menu accelerators, the latter only supporting
Shift/Alt/Control with wxWidgets.
wxSpinCtrl on wx 2.9 has a very small default size, so give the
window size ones a reasonable size.
Use wxFULLSCREEN_ALL when switching to fullscreen, which gets rid
of window decorations like the title bar. Note that to actually
be rid of it with wx 2.9 on OS X, you'll need this patch:
http://trac.wxwidgets.org/ticket/11701
Also remove a couple of files I had accidentally duplicated.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5642 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes a number of problems, including unreliable connection setup,
frequent disconnections, busy-waiting and shutdown deadlocks.
Motion Plus and nunchuk hot swapping now work and Wiiuse does a small
amount of queueing to prevent occasional dropped packets. The OS X
bluetooth stack has no internal input buffering and while a worker
thread can easily keep up with data coming from the Wiimote, the rest
of Dolphin can easily get behind if it is blocked by disk I/O or
similar. Mostly the Wiimote protocol recovers from dropped packets,
but sometimes the Wiimote would get out of sync and send a disconnect.
I wonder if the other platforms might benefit from a bit of queueing
at this layer as well.
Still doesn't support multiple devices, as I kept changing my mind
about how best to do it. I only have one Wiimote anyway..
One improvement to the Wiimote plugin that would be really nice would
be for the scan for new devices to operate continuously or periodically
like on a real Wii rather than just for 5 seconds at startup..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5640 8ced0084-cf51-0410-be5f-012b33b47a6e
efb scale :
auto fractional: the original scaling way, will grant a 1:1 pixel mapping between efb and screen giving the best image quality even in non standard resolutions
at the cost of glitches in some games.
auto integral: automatic but only int values for the scale, no glitches but only the correct pixel scaling when using some resolutions.
the rest are the fixed scales.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5639 8ced0084-cf51-0410-be5f-012b33b47a6e
enable newline normalization
get revision number via `hg svn info` for svnrev.h
ignore incremental/generated binary files (windows/VS at least)
leave a comment if some files need native eol set in svnprops
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5637 8ced0084-cf51-0410-be5f-012b33b47a6e
We really should integrate the nowx functionality into the main build,
removing nowx and HAVE_WX checks and turning USE_WX into a variable
that defaults to GUI use but can be overridden at the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5630 8ced0084-cf51-0410-be5f-012b33b47a6e
hotkey configuration working with wx 2.9, but it turned out to be
too tempting to use it to hack up OS X keyboard support using wx
key events in the "old" input plugins.
It was with some reluctance that I used PAD_Input (and copied it
for Wiimote as well) as that is clearly a deprecated interface,
but this way the hack is contained within the old plugins for when
the switchover to ControllerInterface happens.
The idea is to provide stable keyboard support on OS X for both
GCPad and Wiimote while we debug HID keyboard and real 'mote code.
It works pretty well, although the wx approach does impose a few
limitations like no arrow keys and left/right side modifier keys
are considered equivalent.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5622 8ced0084-cf51-0410-be5f-012b33b47a6e
in general cleanup and bugfix disable pierre patch for the moment as it causes problem in some games and hopefully fix the remaining missing textures for nvidia users in opengl.
make the code in pixelshadergen looks nice and readable.
D3D: this is a ultra experimental commit please check for regressions or error.
make the efb Scale / super sampling level customizable to improve the output quality and let the user configure quality according to his hardware.
is everyone likes this change will translate it to opengl
please test
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5612 8ced0084-cf51-0410-be5f-012b33b47a6e
Not only does it change tons of files to switch to a new and non-working (it doesn't parse my ini files, at least) ini parser, it also reshuffles a lot of code and removes a plugin. The latter part is fine, but doing these two major switches in one revision, one of which is broken, is completely unacceptable. I said to merge tiny changes, not massive reworkings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5589 8ced0084-cf51-0410-be5f-012b33b47a6e
Details: Issue consisted of IR data overflowing extension data on IR report change e.g. mode 3 to 1, which happens for instance when changing data report mode from 0x33 to 0x37.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5588 8ced0084-cf51-0410-be5f-012b33b47a6e
variables, writeable strings and dangerously shadowed variables.
index(), gamma(), exp() and y0() are POSIX functions and using those
names can cause namespace confusion.
A number of C files were missing the final newline required by ANSI C
and some versions of GCC are pedantic enough to complain about this.
These changes simply the scons build, allowing us to get rid of
filterWarnings which is simply more trouble than it's worth.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5574 8ced0084-cf51-0410-be5f-012b33b47a6e
Using Unix tools to operate on a tree containing filename with spaces in them
is really annoying, so rename the handful of instances where there were spaces.
Host.cpp has never been used.
Games tend to lookup the following directories that we don't yet have anything
to put in, so prepopulate them in Data/User/Wii:
title/00010001
title/00010002
title/00010003
title/00010004
title/00010005
title/00010006
title/00010007
meta
shared2/title
Set eol-style native on a number of text files which didn't already have it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5572 8ced0084-cf51-0410-be5f-012b33b47a6e
All visuals with parameter GLX_SAMPLE_BUFFERS_ARB = 0 have
GLX_SAMPLES_ARB = 0, so the old code would only ever choose
visuals with GLX_SAMPLE_BUFFERS_ARB>=1 and GLX_SAMPLES_ARB>=1.
Some drivers do not export any multisampling capable visuals,
so dolphin fails to find a matching visual and falls back to
the single buffered visual(which does not work for some yet
unknown reason). Fixes issue #2647.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5565 8ced0084-cf51-0410-be5f-012b33b47a6e
* Restore Audio Throttle to function properly, broken by Ayuanx many hundreds of revisions back.
* Simplify DSPLLE JIT dispatcher in preparation for an asm rewrite
* Remove hack that made DSPLLE JIT seem faster than it was by running fewer cycles, but resulting in bad sound. This shows off how mysteriously slow it is - I don't understand why it's not faster. Use the DSPLLE interpreter for now if you want to use DSPLLE.
* Made "DSPLLE on Thread" work properly with correct-ish timing - although the speed benefit is really small now.
If it seems like this change slows anything non-LLE down, try turning off Audio Throttle and use the frame limiter in options instead.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5541 8ced0084-cf51-0410-be5f-012b33b47a6e
Removing and adding some elements, making it more readable for others.
Off-Topic: Have fun at the Grandprix! May the best win:P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5536 8ced0084-cf51-0410-be5f-012b33b47a6e
This is especially perceptible for "big" textures, so e.g. EFB copies to RAM should be a bit faster now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5531 8ced0084-cf51-0410-be5f-012b33b47a6e
Apparently, motionplus games are very strict on calibration data checksums, they don't like invalid/0x00'd checksums(this is trackable via 0x01 writes to the active extension register at 0xA400F3). I'll keep all motion plus related stuff that I've discovered on my blog: http://snzgoo.blogspot.com
Next time I'll fix the disconnects, which are most likely caused by the sent motionplus empty/dummy data.
So stage2 might come sooner than u guys thought. Let me hear u scream;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5522 8ced0084-cf51-0410-be5f-012b33b47a6e
Just minor stuff that needs to be finished: Dummy motionplus data needs to be kept dynamic(just like wiimote accel data), or it might cause disconnects after some time. Furthermore, there are 1-2 remaining register writes that have to be understood and emulated.(e.g. 0x00F3/F4). In the end just minor stuff. I'll address that in my next commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5476 8ced0084-cf51-0410-be5f-012b33b47a6e
as a nice result of this eliminate the nasty glubuild2dmipmaps.
thanks to neobrain and orphis for discovering the error and the right values
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5475 8ced0084-cf51-0410-be5f-012b33b47a6e
this not solve the remaining projection problem in some games like mario kart wii
will work that problem later.
please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5473 8ced0084-cf51-0410-be5f-012b33b47a6e
almost fixed real xfb in d3d, i say almost because there are some minor scalling problems. hope will fix them soon.
implemented a more intelligent index generator to emulate more accurately the behavior of the gc.
please give me feedback on this changes.
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5465 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented fixed efb scale to improve alignment and discard some error caused by incorrect scale.
make both plugins work similar. this must improve opengl image quality a lot.
also implemented dynamic resizing in opengl, this way the resolution math the windows resolution on resize.
this is highly experimental so please test a lot.
implemented shader dumping on error thinking in future experiments with shaders.
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5458 8ced0084-cf51-0410-be5f-012b33b47a6e
a MAYORRRRRR change in pixel shader generation, please review all games you can and leave comments this must improve accuracy in graphic emulation a lot.
for example: mario eyes in super mario galaxy, water pod transparency an water transparency on game intro in super mario sunshine, etc.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5457 8ced0084-cf51-0410-be5f-012b33b47a6e
I also already implemented most of the needed data structures and datareport handling for the motionplus-nunchuk passthrough mode, which I'll add up next as well.
Wii Sports Resort is now bootable by just using an emulated wiimote (only working under the old wiimote plugin atm,
I asked billiard to port my commit into his plugin since he knows his plugin better than me and its less work for him than for me,
I kept most parts of my code in modules to simplify that task).
Upcoming stage2: Faking the motionplus on the fly on real wiimotes, that means you will be able to play, e.g. Redsteel2 with a real wiimote and nunchuk or wii sports resort with just your real wiimote.
and nunchuk, but w/o the need of having a real motionpluscontroller connected. The new Zelda 2010 will benefit by that, since it will require a motionplus controller.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5438 8ced0084-cf51-0410-be5f-012b33b47a6e
make native mips loading an option to prevent performance lost in game that not need this functionality.( thanks to dorian.fevrier for point the performance lost.)
added a patch from pierre@pirsoft.de to avoid vertex drops when index array is full in opengl implementation that do not support large index arrays
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5432 8ced0084-cf51-0410-be5f-012b33b47a6e
No need to press the "refresh wiimotes" button on pair up anymore, checking the extended pair up box(still experimental) allows u to pair and hook up the wiimote while being ingame. You still need to do the ALT+F5/F6/F7/F8 connect, but you wont need to press the pair up button + refresh button anymore, feel free to test it, its not perfect yes. Just press 1+2 on your Wiimote to pair it up ingame(you need to check the extended pair up box for that feature).
PS I hope I didnt break nonwin32 builds, I gave my best however.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5413 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a window size setting for windowed mode.
Also pulled some X11 specific code out into a separate file.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5395 8ced0084-cf51-0410-be5f-012b33b47a6e
add an option to limit fps instead of vps for games with bad synchronization
some minor fixes in d3d gui
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5394 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix an issue with the DX9 plugin not being the correct size when starting the game in fullscreen at a higher resolution than the desktop resolution.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5375 8ced0084-cf51-0410-be5f-012b33b47a6e
Also disabled some code in the same place that caused the application to hang in linux. This means that if you select keys from the key list you will have to click Set to make it take effect. At least until I can figure out how to get that working.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5368 8ced0084-cf51-0410-be5f-012b33b47a6e
Moved ControllerInterface to InputCommon. Moved GCPadNew GUI/Config code to a new project, InputPluginCommon. It is used by both GCPadNew and WiimoteNew. I hope that I included everyone's fixes to GCPadNew and ControllerInterface.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5355 8ced0084-cf51-0410-be5f-012b33b47a6e
Also improve the visual appearance in linux. I think I have done so without hurting the appearance in windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5348 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added Xlib.cpp to the linux build. It is completely non-functional but it builds.
Finally, did some clean up of GCPadNew.cpp.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5298 8ced0084-cf51-0410-be5f-012b33b47a6e
Disabled game-specific Wii/Progressive Scan checkbox, since its never used by Dolphin; it would cause side-effects to global configuration if we did write to SysConf in that place.
Fixes Issue 2518
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5283 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed fps display in the top bar, now it shows the real fps of the game.
some code clean up and some corrections to make everything work right in the reference renderer.
multiples xfb now is broken even in single core as is was not an error caused by dual core, i really dono where the error is,everything looks correct but if you test a game with multiples xfb or the ipl you will see the error.
ector if you can take a look at he code and throw me some ideas i'll thank you.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5272 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed the obsolete projection hacks:
* Final Fantasy CC Echo of Time
* Harvest Moon Magical Melody
* Baten Kaitos
* Baten Kaitos Origin
* Skies of Arcadia
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5271 8ced0084-cf51-0410-be5f-012b33b47a6e
It breaks the linux build now. SDL version 1.3.0, which includes SDL_haptic, is not available for most linux distributions at this time.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5264 8ced0084-cf51-0410-be5f-012b33b47a6e
It's currently only really usable on Windows. Linux/OS X will need keyboard support added in, but SDL should work for joysticks on non-Windows without too many modifications.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5254 8ced0084-cf51-0410-be5f-012b33b47a6e
the problem is one strange behavior i found, in opengl when xfb is enable, frame limit causes the frame rate to be limited exact half the correct speed, so if you choose auto and the game uses 30 fps you get 15 fps
so in opengl, you have to limit to the exact double of the game speed, 100 to pal games and 120 to ntsc.
in d3d this not happened every time, it just happen when you change some time consuming setting like changing the ssaa or resizing the window, in that case you have to disable and re enable frame limit to get the correct fps
to all the devs please if you can help me debug this, will give you a lot of thanks as i'm short in time to debug this error and is driving me crazy not to find the source of the problem.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5249 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the problem with wiimote plugin not saving information correctly for the auto reconnect option.
Fixes issue 2475
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5246 8ced0084-cf51-0410-be5f-012b33b47a6e
This still requires more work, like making the option only per Wiimote then rather the first one counting for them all.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5241 8ced0084-cf51-0410-be5f-012b33b47a6e
applied mlkbouba patch to make Mario Strikers Charged Football work (i do not own the game so please test).
some minor tweaks to the plugins to improve performance. for game that do not use xfb the best settings are dual core enabled, audio throtle disabled, frame limit set to the desired value, and xfb off.
change the frameskip calculations to use fps instead of vps as in dual core vps != fps caused by unresolved sync problems, till this problems are fixed the best for game play is calculate times in base of fps.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5239 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed minor font issue with wiimote pad button dialog.
Removed unnecessary OpenGL_MakeCurrent call from DoState.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5209 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed a segfault in linux when a cd/dvd drive is empty or invalid and "Boot from DVD" or "Show Drives" are selected.
On all platforms if a game fails to load show the game list again.
The other things here are essentially code cleanup and won't be noticeable by most users.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5204 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented donko's xfb in D3D:
the bad things:
*is solower in some cases, slower as opengl
*it do not work in dual core mode, it seems direct3d has serious synchronization problems, to the other devs please if you can take a look and help me :)
*real xfb still not working i have to give it more time to make it work.
the good:
*games that uses multiples xfbs will work now using the virtual XFB.
*implemented a more hardware like approach to scaling, now to calculate the pixel scaling i use the xfb size not the efb so the screen pixels relation is more correct now.
*simplified a little donko's virtual xfb to make it less memory consuming as xfb textures are the exact size of the scaled xfb and not full target width.
* when it works even real xfb will let us use super sampling.
I repeat this commit is totally unstable and in dual core mode it will for sure hang the emulator or at best give totally incorrect results.
Other devs please help as thread sync is not one of my strong points :)
i'll keep waiting for the comments an the -1 :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5195 8ced0084-cf51-0410-be5f-012b33b47a6e
If you are having trouble with segmentation faults in linux try "shared_soil=true". That seems to fix the problem. How do we fix this for the static build?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5182 8ced0084-cf51-0410-be5f-012b33b47a6e
after some test the more relevant parameters were the color samples and the tlut max size.
so delete the rest of the parameters and define 3 modes:
Safe : the two values are set to 0 meaning all the texture data and all the tlut data are hashed this is the most correct and slowwwwwwwwwww way
Normal: 37 samples are taken from the color textures an the firs 4096 bytes of the tlut are hashed, is a lot faster than safe mode but in some games i observe small glitches.
Fast: 8 samples are taken from the color textures an the first 1024 bytes are hashed from the tlut, is a little slower than the unsafe cache but at least all the games i tested have correct text output and fast frame rate. the glitches in dinamyc color textures are more noticeable in this mode
this values could be improved, if you find a better combination please post it and the game it fixes and i will update the source.
for the moment, as my time is limited by a lot of work, only implemented the d3d gui, if someone can implement the opengl gui will be a lot of help for me.
please test a lot and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5135 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed a misbehavior in the clear code that causes depth clear problems in reference hardware (Intel as example).
add 6 parameters to optimize Safe Texture Cache:
SafeTextureCacheColorSamples, SafeTextureCacheIndexedSamples, SafeTextureCacheTlutSamples:
this 3 parameters gives the number of samples taken to calculate the final hash value, less samples = more speed, more samples = more accuracy
if 0 is specified the hash is calculated using all the data in the texture.
SafeTextureCacheColorMaxSize, SafeTextureCacheIndexedMaxSize, SafeTextureCacheTlutMaxSize:
this parameters limits the amount of data used for the hash calculation, it could appear as redundant but in some games is better to make a full hash of the first bytes instead of some samples of all the texture.
color, indexed, tlut : define the texture type, full color data, indexed, and the tlut memory.
the parameters are available in the config , no GUI at this time, if the test are OK will add it to the GUI.
if someone needs it will give more examples on how to configure the values for specific games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5116 8ced0084-cf51-0410-be5f-012b33b47a6e
A few things could be solved differently/in a better way, but that would involve some classes and stuff (plus work)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5097 8ced0084-cf51-0410-be5f-012b33b47a6e
This changes the dependency in linux from libxxf86vm-dev to libxrandr-dev.
Use Alt-Return to toggle fullscreen mode (as in windows).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5065 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed X event loops from GCPad and Wiimote plugins, and implemented an asynchronous check for keyboard and mouse buttons.
Also added an X event loop in core that handles events while the emulator is paused. Prevents unexpected behavior from events that occur while the emulator is paused.
Now there is only one event loop running at a time (besides those hidden in SDL).
I will revert this commit if other devs are unhappy with it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5048 8ced0084-cf51-0410-be5f-012b33b47a6e
sorry to tell but this will bring a speed drop, so let you decide if this change stay or not.( used the fastest open source hash algorithm i know)
do not apply full hashing to other format because it kills the performance.
for popular request added 9x SSAA believe me will kill your graphic card even if is the best but the image quality is exceptional.
as always please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5034 8ced0084-cf51-0410-be5f-012b33b47a6e
implement proper window handling (d3d/sw) which i believe fixes a hang that occurs when a game is stopped (plz test this :)) + some minor stuff
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5030 8ced0084-cf51-0410-be5f-012b33b47a6e
This now enables/disables the slider, depending on chosen Backend. Linux and OSX can now also use the slider to change the Volume of OpenAL. Other Backends do not support Volume changes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5026 8ced0084-cf51-0410-be5f-012b33b47a6e
emulator. Also added the ability to close the emulator with the escape key.
Fixed an issue that caused a segmentation fault when trying to close the
emulator when running in fullscreen mode, which can also be done using the
escape key. This makes fullscreen mode useable in linux!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5023 8ced0084-cf51-0410-be5f-012b33b47a6e
Bit of cleanup/grouping, control creation is now a bit more separate from value setting and tooltip assignment which IMO cluttered the code as it was.
Removed something from main.cpp that looked like a hack to me.
Fixes Issue 2229
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5021 8ced0084-cf51-0410-be5f-012b33b47a6e
reverted a tiny leftover of my safe texture cache commit
D3D
renamed the SSAA modes to use samples as MSAA now they are 2,25x and 4x.
OpenGL:
fixed a nasty logical bug introduced in 4984 that causes efb corruption when efb to texture is used
re enabled shader caching as it was not producing errors.
fixed efb misalignment caused by integer rounding still a bit misaligned but many games will look better now
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5020 8ced0084-cf51-0410-be5f-012b33b47a6e
there are only to SSAA modes 1.5x and 2x as they give the best result.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5017 8ced0084-cf51-0410-be5f-012b33b47a6e
improve speed a little in games that have large viewports.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5009 8ced0084-cf51-0410-be5f-012b33b47a6e
true antialiasing using supersampling:
3 modes implemented:
2x = is a one and a half samples supersampled buffer with a linear texture fetch, this produce a similar result of a 2x MSAA
4x = four samples with a aligned texture fetch in the center of the 4 samples, this produce a little best effect that the first mode.
8x = is a four samples with a rotated grid fetching producing a nicer (really nicer in some cases) antialiasing.
please test an let me know if you like this :)
i remember to everyone that supersampling is expensive so don't complain in speed drops :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5006 8ced0084-cf51-0410-be5f-012b33b47a6e
Jordan Woyak