To enforce SM2.0 compatibility, the OpenGL plugin was made to crash when
compiling a shader which does not fit in the SM2.0a limits. However, on some
combinations of OS/drivers/GPU, our shaders already do not fit in these limits,
causing artificial failures only to try to keep a non existant SM2.0a compat.
Basically, this sucks.
This commit increases the artificial limit to SM3.0. If you're using a GPU
which does not support SM3.0 and Dolphin works properly, this should not cause
any problem at all.
PS and VS making. Untested and won't work for now.
Add in program shader cache files.
Readd NativeVertexFormat stuffs.
Add in PS and VS cache things.
SetShaders in places.
Fixed EFB cache index computations in OpenGL renderer.
The previous computation was very likely to go out of array bounds,
which could result in crashes on EFB access.
Also, the cache size was rounded down instead of up. This is a problem
since EFB_HEIGHT (528) is not a multiple of EFB_CACHE_RECT_SIZE (64).
The previous computation was very likely to go out of array bounds,
which could result in crashes on EFB access.
Also, the cache size was rounded down instead of up. This is a problem
since EFB_HEIGHT (528) is not a multiple of EFB_CACHE_RECT_SIZE (64).
Most of the games using EFB peeks are suffering from major performance problems
when these peeks are not disabled in the graphics settings. This is an attempt
to fix this in the GL renderer by doing the glReadPixels in bulk: instead of
doing a lot of 1x1 pixel reads, read for 64x64 pixels at once and keep that in
a cache.
Deck menu in Baten Kaitos: 3FPS -> 54FPS
Character creation in Monster Hunter Tri: 7FPS -> 60FPS
- don't load shader cache from disk in d3d9/11 if shader debugging is enabled (we won't have any info about the source shader code otherwise, etc)
- dump shader source codes on safe UIDs mismatch
Thanks to LordMark and [SS] for reporting those to me ;)
Also fix the wxMessageAlert called from non-gui threads in the WXGTK build to use the passed caption.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7678 8ced0084-cf51-0410-be5f-012b33b47a6e
Also if the OpenGL backend throw a panic alert if the RGB to/from YUYV shaders fail to compile instead of an error log. If these shaders fail to compile it should be reported. I am not sure that a panic alert should be thrown in general when any shader fails to compile (as was discussed on IRC).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7677 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed OnFrame.cpp/h to a more accurate Movie.cpp/h. Made some small changes that may improve movie synchronization.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7620 8ced0084-cf51-0410-be5f-012b33b47a6e
- Moved display related options in the "Display" tab from the general config to the gfx config, renamed the tab to "Interface"
- Moved Wiimote related options in the "Wii" tab from the general config to the wiimote config
- Moved various other options to more appropriate places ("Set Console as NTSC-J", "Skip GC BIOS"
- Dropped "Window Size" adjustment
- Now displaying a warning if one tries to enable software rendering
- Other minor changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7577 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix a minor icon issue in the game properties dialog.
Use a little hack to deal with spaces in file names. Need to find a better way to deal with this.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7470 8ced0084-cf51-0410-be5f-012b33b47a6e
Also, if the render window size changes while frame dumping, scale the resulting video to prevent clipping on linux. This is a complete fix for issue 4316 on linux. I don't know how to implement this on windows though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7412 8ced0084-cf51-0410-be5f-012b33b47a6e
- Removed recent ghanges about separate per-game Video Settings
- Added "One Window 3-State Support" (very close to full implementation)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7391 8ced0084-cf51-0410-be5f-012b33b47a6e
It now works in the debug builds, but not in release builds for some reason. I'm not used to big projects like this so it's probably something obvious that I'm missing. Exclusive full screen mode seems to need the fullscreen resolution for the backbuffer when the DX device is created, so I used adapters[adapter].resolutions[f].xres and yres to get that, but in release builds, that gives me the windowed resolution (in debug it give me the fullscreen res, like I believe it's supposed to), which it reallly doesn't like.
It's not a difficult fix probably, but I've been staring at my monitor in confusion for too long now and need to get to bed. If anyone wants to test, you can still enable the 3D Vision option, it just wouldn't be 3D (obviously).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7385 8ced0084-cf51-0410-be5f-012b33b47a6e
With wxWidgets 2.9.2 now in Externals, SCons was the only
external dependency other than Xcode and building just SCons
from Macports caused a fair mount of extra stuff to be built
unnecessarily, so just include a copy of scons-local.
Always build wxWidgets from Externals which allows us to get
rid of the home-grown autoconf machinery in SconsTests.
The main use case for args.cache was the wxconfig option,
which is no longer relevant after the above changes and
caching options has a lot of potential for confusion,
especially since other build systems don't tend to do this,
so we no longer do it now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7381 8ced0084-cf51-0410-be5f-012b33b47a6e
* Moved the config validity check to reflect the emulator enforced settings at the config dialog
* Removed some obsolete validity checks
* Corrected "EnablePixelLighting" typo in the ini files
Fixes issue 4277.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7374 8ced0084-cf51-0410-be5f-012b33b47a6e
According to AMD's GPU ShaderAnalyzer, most combinations of shaders have about 1.5x-2x higher peak per-clock throughput after this commit. For those concerned about performance, I do intend to make this at least as fast as the other backends. This is one more step toward that goal.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7262 8ced0084-cf51-0410-be5f-012b33b47a6e
some X state will have initialized mutexes and some won't, leading
to unpredictable results depending on the feature set compiled into
wxWidgets and so on.
wxGTK starts by calling Xlib functions indirectly through gdk very
early on, so we must hook into wxApp::Initialize().
I believe this should properly fix issue 1540. In case of problems,
please reopen that issue. If you see XLockMutex in a backtrace,
that's a pretty good indication.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7205 8ced0084-cf51-0410-be5f-012b33b47a6e
video backends.
This would be considerably easier if there was a way for me to have
fully working video in some sort of VM. If anyone has achieved that,
preferably with Linux but failing that with Windows, I would
appreciate any tips on how to set it up. VideoSoftware used to more
or less work in a VM, but I've never been able to get OpenGL to do
much more than open the window and display OSD messages.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7201 8ced0084-cf51-0410-be5f-012b33b47a6e
in Initialize() and Video_Prepare(). Video_Prepare()
then becomes the entry point for associating the current
thread with the rendering context, which is currently
only known to be necessary for OpenGL.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7195 8ced0084-cf51-0410-be5f-012b33b47a6e
- ReImplementing Single Core Mode like Dual Core Mode Style.
- Stage 1: My goal is, we have the Fifo, CommandProccessor code the more clear, maintenible and documented possible. When I quit dolphin I want any developer can continue with the work only reading the code.
* Big Refactoring: A lot of functions was changed the names, and modularized.
Now the FifoLoop and CatchUpGPU does not exist, was replaced by RunGpu() and RunGpuLoop().
The general idea is modeling the code like the real HW. The fifo is only a buffer where the Write Gather Pipe write the commands and from the Graphic Processor read these.
* Big Clean UP a lot of obsolete code and comments was deleted, like DcFakeWachDog, "Fifo very soon hack", etc.
In the stage 2, I will refactoring more code doing emphasis in the division of CommandProcessor, Fifo, Gpu Emulation. Beside I will comment all functions and variables in the code (Don't worry I will ask for English help for this part ;) )
Please test a lot SC mode and DC mode :)
Thank you so much for testing always and the patience. I don't like broke your favorite game but... you must believe me this part is very sensible, I only try to contribute for have a better and stable dolphin emulator.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7185 8ced0084-cf51-0410-be5f-012b33b47a6e
so VideoOGL always is in the same state when starting a guest program.
Also constify the RasterFont, while we are at it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7166 8ced0084-cf51-0410-be5f-012b33b47a6e
I think that isFifoBusy bring better sync with VI (video interface) because the CPU emulated threads are waiting for DrawDone in BP Register. So, I do some modifications.
1) Rename "IsFifoBusy" by "isPossibleWaitingSetDrawDone"
2) Only activate isPossibleWaitingSetDrawDone when bFF_GPLinkEnable is true in fifo loop "Inmediate mode" that is because in theory this drawsync function is using in this mode.
3) Deactivate isPossibleWaitingSetDrawDone also in SetFinish in PixelEngine, beside when 32 block is finish.
Please regression in yours games thats can bring some FPS more above all with VPS frame limiter ON (Auto, 60, 50, etc).
- Fix waiting in AbortFrame(), please test mp1/mp2 is fixed again.
Good look!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7123 8ced0084-cf51-0410-be5f-012b33b47a6e
buildfix
move much of the build settings to .props files
-please use them as much as possible in the future, instead of changing individual projects
NOTE: to avoid left over blobs, clean your builds *before* applying these changes.
TODO: add DebugFast target for projects that are lacking it. Lack of DebugFast targets cause the linker to use LTCG when we don't want it.
please test for regressions which could be caused by being too happy with compiler flags :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7109 8ced0084-cf51-0410-be5f-012b33b47a6e
problems, whole functions in .h files need to also be static in
case they are included in several .cpp files.
Also a few other minor LTO fixes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7082 8ced0084-cf51-0410-be5f-012b33b47a6e
I __think__ this is the actually correct way to do it, but not sure. Someone please have a look at this...
Not sure if this changes anything anyway, since we're using scissor rects to clip this stuff anyway... Maybe the screen edges weren't cleaned properly before though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7063 8ced0084-cf51-0410-be5f-012b33b47a6e
and just operate on lists of object files instead.
This helps with LTO since LLVM/clang LTO is completely broken
by static libraries. It also helps identify symbol clashes
between components like the former plugins.
Many linkers also expect static libraries to form a strict DAG
which turns out be a difficult rule to uphold in practice,
especially since some of our platforms aren't picky about this.
LTO builds currently appears to crash at runtime because of
the static wx libs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7056 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix another minor issue with frame dumping.
Add the graphics config dialog button back to the main config.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7041 8ced0084-cf51-0410-be5f-012b33b47a6e
fix all build targets (they've all built here - you may have to manually delete the intermediate directories if you have conflicts after this commit).
set the debug path to $(TargetDir)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7022 8ced0084-cf51-0410-be5f-012b33b47a6e
- dislocating all sensible stuff related to "values per game/pattern" outside the sourcecode.
- giving more control to end-users across the user-friendly interface.
- deleting/cleaning some dead variables.
- updating all gameconfig.ini data to reflect new PHack concept (pending upload).
* Updated Italian translation
- Includes corrections, a better strings translating and suggestions directly by Google Code's people.
+ Minor old pending changes...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6973 8ced0084-cf51-0410-be5f-012b33b47a6e
Back out r6960 for now. The wxGLCanvas may need to be persistent
and owned by DolphinWX in the rendertomain case.
Disambiguate SWVideoConfig.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6962 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes the OS X build more robust and should help pave the
way for the integration of the video plugins as well as LTO.
There are now no more global class level namespace conflicts left,
as evidenced by the fact that Dolphin can be linked with -all_load,
not that you would want to.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6958 8ced0084-cf51-0410-be5f-012b33b47a6e
This WILL temporarily break the Linux and MacOSX builds but should be easy to fix.
Things left to do:
* The UI on the new Audio tab for the LLE/HLE choice is ugly
* At times the code still look "plugin-y" and needs cleanup
* The two plugins should be merged further. DSPHLE should use the emulated memory etc of DSPLLE as much as possible, so that simply saving the DSPLLE state is enough. This would also bring the possibility of savestate compatibility between the two plugins.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6947 8ced0084-cf51-0410-be5f-012b33b47a6e
Profiler.{cpp,h} also happened to be the only dupliated
filenames left in Source, the absence of which should make
link-time optimization easier to get working.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6935 8ced0084-cf51-0410-be5f-012b33b47a6e
Guess it would be better if we made bpmem.blendmode.alphaupdate private to prevent improper usage...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6932 8ced0084-cf51-0410-be5f-012b33b47a6e
Move shader and input layout management from EmuGfxState to Vertex/PixelShaderCache and D3DVertexFormat.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6906 8ced0084-cf51-0410-be5f-012b33b47a6e
Move depth state management from EmuGfxState to Renderer.
Call stateman->Apply in Renderer::ApplyState instead of EmuGfxState::ApplyState.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6903 8ced0084-cf51-0410-be5f-012b33b47a6e
When rendering to the main window, the wxGLCanvas should really
be owned by the DolphinWX code for it to be safely freed.
Hack around the problem by just hiding the canvas for now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6890 8ced0084-cf51-0410-be5f-012b33b47a6e
minor performance improvement and also possibly make that platform a
little less prone to problems with ABI assumptions in the JIT code,
although I haven't measured the first or seen signs of the latter.
Only the GL context needs to be specifically freed when shutting
down OpenGL. The GL canvas is implicitly freed by wxWindow.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6885 8ced0084-cf51-0410-be5f-012b33b47a6e
'#' is a fairly accepted comment character for .ini files along with
the more official ';', but '//' isn't.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6872 8ced0084-cf51-0410-be5f-012b33b47a6e
Mark a couple of strings for translation that were missed before.
Update some of the languages from the translators.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6856 8ced0084-cf51-0410-be5f-012b33b47a6e
Initialize locale in each of the plugins on windows so that the plugin configuration dialogs are translated and the translators will get off my back.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6847 8ced0084-cf51-0410-be5f-012b33b47a6e
in the title bar. It is more usefully displayed using the overlay
and long pathnames are not suitable for title bars and probably not
even safe depending on the underlying windowing system.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6817 8ced0084-cf51-0410-be5f-012b33b47a6e
full-screen mode is toggled, so we just re-set it afterwards.
Didn't mean to include the version string in the status bar updates.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6814 8ced0084-cf51-0410-be5f-012b33b47a6e
Placing the render window at position 0,0 makes it unmovable on OS X.
Use the conventional r1234 format for SVN revision numbers.
Delete mis-copied .svn directories from the application bundle.
Only warn about a failed low-memory allocation if one was requested.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6811 8ced0084-cf51-0410-be5f-012b33b47a6e
Even with LoadStorePaired accounted for, there are still some
niggling 64-bit cleanliness bugs left that are not practical
to weed out on a single platform. We should probably have an
option to use >2GB memory only on all platforms for debugging.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6792 8ced0084-cf51-0410-be5f-012b33b47a6e
please test for regressions and fixes.
some little changes to make pixel shader more dx9 sm2.0 friendly. the condition is not to use pixel lighting ( sorry no hardware support for the quantity of parameters needed).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6777 8ced0084-cf51-0410-be5f-012b33b47a6e
About 40% faster than the SSE2 implementation.
May not be required in future but good for reference.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6766 8ced0084-cf51-0410-be5f-012b33b47a6e
Added German language translations. Thanks to JackyCola.
Added Italian language translations. Thanks to RebuMan.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6763 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed a bug on Texture Converter when Copy EFB to RAM's cache is disabled, so...
* ...accordingly, I revert my latest commit because now it becomes useless.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6760 8ced0084-cf51-0410-be5f-012b33b47a6e
to allow both system-side (also Windows) and per-user installations.
The IPL ROM is another candidate for this, but I don't have an
image to test with.
Perhaps a more general solution would be to just phase out the Sys
directory. As used for data which would have been available in ROM
or flash on the real hardware, it really contains two classes of
files that are both read-only during emulation:
- Settings and font files, which can be freely distributed
- ROM files which must be obtained from the user's own GC or Wii
Since the two could be freely put together on Windows without any
problems and with the users of that platform being resistant to
change, it may be easiest to just treat Sys as another directory
to be copied from the application bundle into User/Sys at startup
on non-Windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6738 8ced0084-cf51-0410-be5f-012b33b47a6e
keyword "id" in the public auibar.h header.
You now need at least r66546 of wxWidgets to build on OS X.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6735 8ced0084-cf51-0410-be5f-012b33b47a6e
These files are acquired from the hardware ROM by the individual user,
who does not normally have write access to Sys on Linux and OS X.
If you currently have these files in Sys/GC, just move them to User/GC
(~/Library/Application\ Support/Dolphin/GC on OS X).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6734 8ced0084-cf51-0410-be5f-012b33b47a6e
- Assign width and height to the actual powers of two rather than to the exponents...
- Clean up FramebufferManager()
- Make use of more depth buffer formats to prevent some devices from failing to create a depth buffer
Should fix issue 3256.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6730 8ced0084-cf51-0410-be5f-012b33b47a6e
Tweaked SetMultiVSConstant functions to prefer glProgramEnvParameters4fvEXT over glProgramEnvParameter4fvARB with fall-back for older harder.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6713 8ced0084-cf51-0410-be5f-012b33b47a6e
Changed the EFB color order from RGBA to ABGR to emulate it correctly on little-endian platforms. Added some enumerations to clear up what components are which colors. Fixed the TEV alpha input LUT which would have caused problems if anything was doing alpha comparisons.
Changed box filter for EFB copies from 3x3 to 2x2 because that is probably correct. Also makes the math nicer.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6696 8ced0084-cf51-0410-be5f-012b33b47a6e
(acc and ax) and product register with one read/write.
Gives a minuscule speedup of not more than 4%. In exchange, breaks all
your out-of-tree changes to dsp. Tests are not building again, yet.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6680 8ced0084-cf51-0410-be5f-012b33b47a6e
Whatever that means, it fixes that stupid Super Mario Sunshine glitch and possibly lots of other stuff, so test as many glitchy games as possible with this ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6669 8ced0084-cf51-0410-be5f-012b33b47a6e
Should fix almost all regressions of the recent ClearScreen changes and keep the fixed stuff.
The Super Mario Sunshine glitch is caused by another issue and will be addressed in my next commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6668 8ced0084-cf51-0410-be5f-012b33b47a6e
corrected peek color and peek z to correctly emulate real hardware formats.
implements native gamma correction.(i don't own any game that uses this functionality so i will appreciate feedback)
i need a lot of feedback in this changes please
enjoy
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6664 8ced0084-cf51-0410-be5f-012b33b47a6e
- Clear alpha channel to 0xFF instead of 0x00 whenever we (re-)create the EFB texture
- Disable color/alpha channels whenever the actual EFB format doesn't use them
Fixes issue 2826.
Fixes issue 1879.
Please check if issue 3014 is fixed now, as well as any other games which might have broken due to ClearScreen changes.
For what it's worth, Super Mario Sunshine still shows a small glitch even with these changes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6635 8ced0084-cf51-0410-be5f-012b33b47a6e
Will fix some games and break some others.
Assist trophies in SSBB work fine now, Super Mario Sunshine is a little broken again.
Still needs some more work...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6627 8ced0084-cf51-0410-be5f-012b33b47a6e
skid_au had implemented this in a previous revision and enabled it by default, but it caused glitches if STC wasn't set to "safe" (which kinda defeated the purpose since it slowed down stuff again).
Also renamed the "safe texture cache" to "accurate texture cache", since setting the "safe" texture cache to "safe" sounds kind of silly..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6625 8ced0084-cf51-0410-be5f-012b33b47a6e
(probably nobody else cares, but I need at least one video plugin that actually works on this computer)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6618 8ced0084-cf51-0410-be5f-012b33b47a6e
- Merge the EmuWindow class to VideoCommon.
- Implement free look in the D3D plugins. Seems like it had broken before though; only rotating the view works..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6616 8ced0084-cf51-0410-be5f-012b33b47a6e
* More formats recognition for "Clear Screen" step. Improved the ability handling the alpha channel (% color translucency).
* Related to CPUID detecting:
- Added support displaying correct SysInfo for recent multicore Intel CPUs x86-64 with HT/SMT (Core i3/i5/i7 and Xeon) based on Nehalem architecture.
+ minor and passive changes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6604 8ced0084-cf51-0410-be5f-012b33b47a6e
This comment should give a great speed increase, numerous games (SMG, NSMBW, DKCR, ...) which I tested are at least 20% faster now!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6574 8ced0084-cf51-0410-be5f-012b33b47a6e
DX9: Revert to the old EFB coordinate scaling. Glitches caused by higher EFB scales probably can't even be fixed properly in DX9, so let's not even mess with it...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6573 8ced0084-cf51-0410-be5f-012b33b47a6e
Should fix problems caused by EFB scales other than Native (excluding fractional!). Test whether this fixes games which work fine with native EFB resolution but show glitches with higher internal resolutions.
Also fixed numerous warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6549 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the default wiimote emulation mouse button settings on linux.
Fix a little c++ operator precedence issue.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6534 8ced0084-cf51-0410-be5f-012b33b47a6e
Most of the code dealing with the LogTypes namespace was C which lead to a
lot of nonsensical casting, so I have dumbed LOG_TYPE and LOG_LEVEL down to
plain C even though the move of wiiuse into Source means we don't currently
call GenericLog from C.
Set logging threshold to MAX_LOGLEVEL at startup so debug builds will also
p rint debugging messages before the GUI is running.
For some reason the way we use SetDefaultStyle doesn't play nice with wx 2.9
so we just get the default black text on a black background. Using a gray
background works around that problem, but I found it to also be much easier
on the eyes so I have switched the background color on all versions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6528 8ced0084-cf51-0410-be5f-012b33b47a6e
Separated UI from debugger functionality. Generally cleaned up that stuff.
Most functionality needs to be reimplemented now, but will be available to D3D9, D3D11 as well as OpenGL then.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6523 8ced0084-cf51-0410-be5f-012b33b47a6e
10.0 level hardware can't create multisampled depth buffers which can be bound as shader resources as well, but we need that for e.g. EFB access or EFB copies.
Only multisampling the color buffer doesn't work either since color and depth targets must be using the same sample count.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6491 8ced0084-cf51-0410-be5f-012b33b47a6e
Return values from RunCycles isn't consistent/meaningful at the moment so assuming it runs as many cycles as asked.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6487 8ced0084-cf51-0410-be5f-012b33b47a6e
- Speed up MSAA by using custom resolve shaders instead of ID3D11DeviceContext::ResolveSubresource().
- Fix EFB access when MSAA is enabled.
- Implement the "force linear filtering" option.
- Compile shaders using shader model 4.1 or 5.0 if available.
- Some minor cleanups.
Who cares about DX9 and OGL anyway :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6481 8ced0084-cf51-0410-be5f-012b33b47a6e
Restricts 'ssbm' loop detection to PBs with valid loop pred_scale values.
Masked coef_idx in the adpcm code so it can't fault on invalid values.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6480 8ced0084-cf51-0410-be5f-012b33b47a6e
DX11: Fix a DX11 debug runtime error caused by the vertex shader output signature and the pixel shader input signature not matching if per-pixel lighting is disabled. Someone forgot disabling those pixel shader parameters ;P
DX11: Enable use of dynamic textures wherever possible.
DX9: Remove two unnecessary TODOs. Someone forgot removing those since they've been obsolete for a long time ;P
Anyway, at least working mipmaps and dynamic textures should increase DX11 performance a bit. And "a bit" is more than my usual "marginally" ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6473 8ced0084-cf51-0410-be5f-012b33b47a6e
Add multisampling support.
EFB access doesn't work with MSAA enabled, yet.
Additionally clean up some stuff, fix a memory leak, ...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6468 8ced0084-cf51-0410-be5f-012b33b47a6e
* revert back to proper upscale mantissa of parameters A and C
* properly downscale magnitude to 0.24 bits instead than ≡0.23
* Z Eyespace conversion for projection by original patent concept
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6463 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add some info about a backend's feature set (MSAA, Real XFB, EFB to RAM, ..) to VideoConfig
- Gray out options if they aren't supported by the backend or if changing them doesn't affect anything (e.g. changing STC mode if STC is disabled)
- Allow signed bytes for D3D11. Not sure if this causes glitches, but it should work
- Call wxEvent.Skip() in the event function handlers, not sure if this fixes any bugs but the old code definitely caused bugs during development of this patch
- Fix a memory leak in the configuration dialog if D3D11 is used
- Other minor stuff that doesn't need to be mentioned or which I forgot
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6450 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the macosx build (perhaps).
This changes the JitIL timed profiling to using assembly language to obtain the time. It does seem to be faster. Not sure if it will work on macosx, but if it does it has the necessary precision that gettimeofday does not have.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6448 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added an option to explicitly disable building with MPG framedumps. To use it add -DENCODE_FRAMEDUMPS=OFF to cmake on the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6429 8ced0084-cf51-0410-be5f-012b33b47a6e
Add a version check for avcodec and swscale libraries.
Fix a bug in the xlib wiimote emulation button configuration. If you are using a mouse button for wiimote emulation you may need to adjust your settings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6426 8ced0084-cf51-0410-be5f-012b33b47a6e
a little bugfix in vertex loading and some fixes.
not much time to work these days but at least i can spend a little time fixing thing.
please test for regressions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6409 8ced0084-cf51-0410-be5f-012b33b47a6e
Games that have higher frequency sounds and music should sound a bit better using 48k.
I don't have any games that use DTKMusic so that upsampling code untested. If you get strange sounds only at 48k try toggling dtk music to see if that isolates the problem and let me know.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6383 8ced0084-cf51-0410-be5f-012b33b47a6e
DX9: When clearing the back buffer in Renderer::Swap(), use IDirect3DDevice9::Clear instead of a clear quad if possible. Should improve performance marginally.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6373 8ced0084-cf51-0410-be5f-012b33b47a6e
Windows audio backend with lower latency.
Audio never glitches on my machine but the number of buffers may be set too aggressively. If you run into problems try turning up NUM_BUFFERS in the h file and leave some feedback.
From my tests games seem to prefer filling the buffer with smaller chunks. For this to work the callback that fills the buffer needs to either spin or run async so I went with async.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6371 8ced0084-cf51-0410-be5f-012b33b47a6e
First: Added a DESTDIR option for package building.
Second: Change the OpenCL setup. On both linux and windows use CLRun. I completely removed the option here. If CLRun works on MacOSX this should be done there as well, and this change implemented in the scons build also. Then we could remove the HAVE_OPENCL and the new USE_CLRUN definitions. Then we will finally have the dynamic detection of opencl set up cross platform.
On a side note, it doesn't seem that the program loaded from TextureDecoder.cl compiles or runs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6366 8ced0084-cf51-0410-be5f-012b33b47a6e
Also link the dolphin-emu executable against GL in the cmake build. Why? This seems to fix the segmentation fault on stop issue. Although curiously enough, linking the dolhpin executable against the system shared library SOIL fixes the problem too. It doesn't work with the static version of SOIL build in the externals. The reason the problem disappeared with the scons build is that the executable is implicitly linked against GL since the linker flags are set up to be thrown in everywhere.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6364 8ced0084-cf51-0410-be5f-012b33b47a6e
Also some general clean up of the main CMakeLists.txt file. I think it is nice to keep the checks and analysis of the results together.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6363 8ced0084-cf51-0410-be5f-012b33b47a6e
Not sure how to fix Dolphins hotkeys when 3D Vision is enabled (I do know a way, but it's messy and I don't want 3D Vision messing with Dolphin's cleanliness).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6362 8ced0084-cf51-0410-be5f-012b33b47a6e
- various fixes for using CMake on Windows
- support building external SDL, zlib, CLRun, wxWidgets
- support using precompiled GLew and WiiUse libs on Windows
For what it's worth, I'm not quite sure if I got all the wx files right...
Building with MSVC2008 still doesn't work yet, but is a lot closer now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6361 8ced0084-cf51-0410-be5f-012b33b47a6e
The finding was that 99% of the time, textures are static in memory. However, Dolphin would pessimistically continue to decode and copy the same texture every time. The optimisation is to check if the texture matches what is in the cache, and if it does, Dolphin should early exit.
The result is the speed in New Super Mario Bros Wii increased 35% with spinning coins. Still not as fast as EFB copy to texture though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6352 8ced0084-cf51-0410-be5f-012b33b47a6e
I am officially killing the local/global build crap. The "local" build thing should never have existed. There is now only one build that is essentially what the "global" build was before. This is the way a proper build system should work. I will soon write a wiki page to describe how to properly use the cmake build system, and how you can still set things up to get the "local" build from before. However, that type of build should be considered a developer tool, and not the way that dolphin-emu should be built.
Briefly, to use cmake now do the following from the toplevel of dolphin's source:
mkdir Builddir
cd Builddir
cmake ..
make
make install (you may need superuser privileges)
Note that the scons build is still building dolphin in the old way.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6341 8ced0084-cf51-0410-be5f-012b33b47a6e
Explanation of this commit: We only have to care about four BP registers in ClearScreen, the remaining API state should be reset. The colorEnable and alphaEnable parameters are obsolete, for some reason directly using them caused the SMS glitch with DX11 (because of that bpmem.zcontrol.pixel_format == PIXELFMT_RGBA6_Z24 check in BPFunctions.cpp, is this one actually correct?)
The comment in BPFunctions.cpp was at least misleading (if not even wrong), so I removed it.
For what it's worth, someone needs to port this to the OpenGL and Software plugins (unless they're doing this properly already)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6327 8ced0084-cf51-0410-be5f-012b33b47a6e
Some notes about this:
- config.h doesn't get written yet, so you'll have to use one generated by SCons
- dependency checking isn't really implemented, yet. Just some basic checks for OpenGL or ALSA, we need something more sophisticated though.
- the OpenGL plugin fails to load for some reason which I can't debug right now due to the libc debuginfo package version in openSUSE not matching the runtime packages
- there's even some support for generating install packages (rpm/deb/.. packages, NSIS installer, etc). It doesn't work properly right now though, since some paths seem to be hardcoded into Dolphin's source
- probably lots of other stuff I forgot... Just take a look at all the TODOs in the CMakeLists.txt files for more information ;P
Additionally, I added various files to the svn:ignore list.
tl;dr: Unless you are a dev or you're building binary packages, this commit shouldn't bother you :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6326 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes issue 3399.
Also remove unnecessary stateman/gfxstate applies:
- gfxstate->ApplyState/Reset only need to be called by VertexManager
- stateman->Apply only needs to be called before any Draw/DrawIndexed call
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6309 8ced0084-cf51-0410-be5f-012b33b47a6e
Small performance improvements by increasing the ring buffer size and using a better offset algorithm.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6303 8ced0084-cf51-0410-be5f-012b33b47a6e
Games affected by this change: Mario Smash Football, Mario Strikers Charged Football, Monster Hunter Tri.
Other games possibly affected: Shaun White Snowboarding, Resident Evil Code: Veronica, Baten Kaitos.
This implementation will decrease performance if the game uses this feature, but the glitches will be gone. I'll add an option for this in a later commit. EFB pokes are somewhat slow in DX11 right now, speed should be okayish in DX9 though.
Other changes:
- SOMEWHAT cleaned up the EFB access code in DX9
- Fixed incompatible parameter list of AccessEFB and TVideo_AccessEFB.
- Fixed a theoretical bug in ReplaceRGBATexture2D, add support for STAGING textures
- Removed unused parameters in various DX9 functions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6300 8ced0084-cf51-0410-be5f-012b33b47a6e
The "Enable Progressive Scan" option in the Wii menu now controls whether the Wii/GC will detect a progressive scan display. This affects the timing of some games (both GC and Wii). Usually, the checkbox should be unticked as progressive scan displays require higher bandwidth.
This fixes the slow speed in NBA JAM. This also fixes the hang in Megaman Network Transmission. This should fix Deadly Creatures (turn off progressive scan).
Fixes issue 3314.
Fixes issue 3066.
Fixes issue 2571.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6297 8ced0084-cf51-0410-be5f-012b33b47a6e
Now, there are two:
Real dimensions: Width and height of the original GameCube texture
Virtual dimensions: Width and height of the texture used by dolphin-emu's renderer
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6291 8ced0084-cf51-0410-be5f-012b33b47a6e
patch/hack to make dolphin work under virtual box using Linux guest
tested under gentoo and virtualbox 3.2.8 with 3d acceleration on
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6262 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add a sanity check in CRenderFrame::MSWWindowProc. Possibly reduces the risk of a crash when starting a game and immediately closing the emulation window when using the DX9 plugin.
- DX11: Add the resource usage as a parameter to CreateQuadVertexBuffer, possibly to be used in the future.
- reduce the size of the EFB access buffers from 4x4 to 1x1 since they needn't be bigger anymore
- some fixes to the recent hires commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6256 8ced0084-cf51-0410-be5f-012b33b47a6e
Should fix SMG for NVIDIA users. Slightly changes behavior of the AccessEFB function, so test this for regressions, please (esp. in HD resolutions).
I tried to apply the same changes to Video_DX9, but for some reason EFB access didn't work anymore then. Might look into that later.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6247 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed EFB Scale to Internal Resolution.
Removed Auto Scale option (it is now always on).
Added on-the-fly changing of the Internal Resolution in the OpenGL and Direct3D9 plug-ins.
Further consolidated the code in the video plug-ins.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6240 8ced0084-cf51-0410-be5f-012b33b47a6e
First step to bring a level of consistency between the video plug-ins - variable names, spacing, function names, function order, comments, file names. This will help us identify common code for VideoMerge.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6235 8ced0084-cf51-0410-be5f-012b33b47a6e
for all the plugins implemented per pixel lighting, this will make games that uses lighting a lot nice. (just look at mario sunshine and compare :))
for dx9: implemented temporal anaglyph stereo: just grab your red-cyan glasses and enjoy.
stereo calibration: use stereo separation ( distance of the point from you are looking) and Focal Angle: the angle necessary to focus in one particular object.
this settings are different in every games as they use different depth ranges.
please for any regression and bug introduced by this commit.
if you ask why i did not implement stereo in dx11 and opengl the reason is one: they don't work right when i have more time will try to find a way to make them work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6224 8ced0084-cf51-0410-be5f-012b33b47a6e
Main Issues:
DX11 is functional with a ~2MB/s mem leak.
OpenGL/DirectX9 have a black display while game runs. (DirectX 9 flashes good display on emulation stop)
Too many virtual function calls. (once everything is working, I will work on removing them)
Won't build on non-Windows in its current state. (mainly EmuWindow will need changes for Linux/OS X)
Probably other stuff.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6219 8ced0084-cf51-0410-be5f-012b33b47a6e
eating each others events.
Manifests itself in GPU thread waiting forever for a reply in GL library code(and thus
a frozen emulation). Most of the time, this can be resolved by creating more events
(clicking, changing focus), but sometimes it stays stuck.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6218 8ced0084-cf51-0410-be5f-012b33b47a6e
The theoretical result is slightly different to the original shader because the
final adjustment is to the range [0/255..255/255] instead of
[0/16777215..16777215/16777215].
The real result is vastly different on some gpus that were giving incorrect results
of bits 23..16 (y-component) wrapping around while bits 31..24 (z-component)
stayed the same, and bits 31..24 changing while in the middle of the value range
for bits 23..16 for large depth values.
This should fix issue #3123.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6217 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed the "Change disc..." command. The filename of the disc was being lost between functions.
* Split the ChangeDisc function into two functions: EjectDisc and InsertDisc
* Moved the "Change disc..." command to the File menu.
* Removed some log messages that caused the debug build to crash when loaded with release build plug-ins.
Fixes issue 3036.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6206 8ced0084-cf51-0410-be5f-012b33b47a6e
include referenced array data in the hash to avoid problems in some games.
this version is a slower than the last version but is more stable, still much work to do but so little time to do it :)
Added Dlist Caching Option to the plugin configuration so anyone can compare the performance change.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6205 8ced0084-cf51-0410-be5f-012b33b47a6e
Marginally speed up old wiimote plugin by doing less memcpys
A lot of changes went into the bt dongle emulation, so please test for regressions :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6177 8ced0084-cf51-0410-be5f-012b33b47a6e
This commit might fix some issues when colors were drawn slightly wrong in the DX plugins but correct in OpenGL. So please test this ;)
Thanks to Billiard for spotting.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6171 8ced0084-cf51-0410-be5f-012b33b47a6e
still experimental, not totally optimized but must bring a nice speed up
please test for regressions an error. an please Linux people fix scons :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6149 8ced0084-cf51-0410-be5f-012b33b47a6e
It no longer uses the TEXTURE_RECTANGLE extension for GameCube textures. Since GameCube always uses normalized texture coordinates, it's an unnecessary burden.
Please test hi-res textures.
Wow, it's been a while.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6144 8ced0084-cf51-0410-be5f-012b33b47a6e
use plain vertex arrays instead of VBOs to render in Opengl plugin as the nature of the data make VBOs slower. This must bring, depending on the implementation, a good speedup in opengl.
in my system now opengl and d3d9 have a difference of 1 to 5 fps depending of the game.
some cleanup and a little work pointing to future improvements in the way of rendering.
please test and check for any errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6139 8ced0084-cf51-0410-be5f-012b33b47a6e
some useless IR pointer math... It still doesn't make rotation work
a sign fix when tilting along y axis (twisting the wiimote)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6121 8ced0084-cf51-0410-be5f-012b33b47a6e
- First change is for Mixer.cpp, I've just re-added the functionality lost in r4724, so, if you disable audio throttle, games like donkey kong jungle beat, will work properly.
- Second change points to a doubt comment on UCode_Zelda_Voice.cpp, where it did not know here PB.NeedsReset came from. Well, the answer is it came from line 03b2 of the dumped Ucode, so when PB.IsBlanck equals to zero, PB.NeedsReset is zero too.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6100 8ced0084-cf51-0410-be5f-012b33b47a6e
Use the debug option for conf.CheckWXConfig on OS X as on Unix.
Take care of a few compiler warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6084 8ced0084-cf51-0410-be5f-012b33b47a6e
Really that happens because the fifo.CPReadWriteDistance is negative.
Example: CPReadWriteDistance: -864 CPEnd: 10092672 fifo.CPBase: 9568416
In SMG this is because PI_FIFO_RESET is writing and after fifo.CPReadWriteDistance will be setted to 0.
To Prevent that, I've Implemented AbortFrame function in the CommmandProcessor. It should fix overflown because of that.
Note: There is other issue (Issue 2846) where the fifo.CPReadWriteDistance is negative too but the effect is different.
I'm working to solve this.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6083 8ced0084-cf51-0410-be5f-012b33b47a6e
Clean up of the input selected for the opengl x window in linux.
Fix a potential segfault when taking a screenshot (happens consistently when using "Save Targets" from the video debugger window).
Fix a memory corruption error that results from the wrong image size being passed when dumping textures.
Make the screenshot hotkey configurable.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6067 8ced0084-cf51-0410-be5f-012b33b47a6e
Remove a member variable which I introduced in r5907 although it never actually got used. Restores binary compatibility (at least in that regard) to pre-r5907 video plugins, but breaks any binaries after that :P
Update FIFO watermark tightness recommendations. 1000 is quite a high value I guess, but some people seem to need it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6060 8ced0084-cf51-0410-be5f-012b33b47a6e
The code changes disable the usual pipeline flush for certain BP Writes that occur while the minimap is being drawn in Zelda: twilight princess. This significantly increases speed while in hyrule field. The way this is accomplished is described more in depth on page 42 of Xtreme's thread. Big thanks to Xtreme for doing a great job hosting that thread, and Kiesel-stein for initial work on the hack
Also, I used the resource editor in Visual studio to generate the GUI code for the DX11 plugin, and some code appeared to be removed, although the behavior of the GUI did not seem to change. Hopefully someone more experienced with resource files (forms?) can double check that no code was damaged
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6057 8ced0084-cf51-0410-be5f-012b33b47a6e
(those originating from a thread other than the gpu thread)
glxMakeCurrent is supposed to error out when the context is
still current in another thread. NVIDIA handles that, but mesa3d errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6054 8ced0084-cf51-0410-be5f-012b33b47a6e
* Some fixes to linear interpolation
* Adds interpolation to ADPCM samples
* Relaxed a volume limit in ADPCM_Vol
Fixed:
- Frac rolls over one iteration before samplePos advances. Can introduce noise similar to flipping samples (1234 => 1214). Introduced oldFrac to fix this. This isn't as noticeable as it probably should be because of below.
- When samplePos doesn't advance it interpolates between two copies of the same sample which actually does nothing. Changed it to always use the current and next sample.
- When frac is 0 you should get 100% of yn2 instead of ~99% added a +yn2 to balance it.
Other changes:
- Added linear interpolation for ADPCM. Sounds like a good idea.
- Set ADPCM_Vol to clamp to x8000 instead of x4e20. Some games will play some sounds at x8000 volume anyways since the volume is applied before this. Lower limit can result in quiet music (x4e20) but some loud ambient sounds (0x8000).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6041 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix modality for the config dialogs on windows.
Fix the compress/decompress dialog wxString issues for MacOSX (hopefully).
Fix the DSP-LLE debugger for linux.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6031 8ced0084-cf51-0410-be5f-012b33b47a6e
is required to correctly link with C++ libraries like wxw.
Tell OS X that the user is doing something when using the wiimote
so that the screensaver doesn't come on when playing a Wii game.
Replace unnecessary floating point with integer math.
Remove unnecessary <sys/stat.h>'s.
Correct a few type nits.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5995 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix an issue that prevented the code window settings from taking effect on application start. (Thanks shuffle2, skid_au, and sanchez).
Fix a potential segmentation fault with the DSP-LLE debugger window.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5988 8ced0084-cf51-0410-be5f-012b33b47a6e
Don't rely on trailing /'s in directory names.
Destdir only works for global builds.
Only tar up global builds if they are in a destdir to
avoid SCons eating all available memory indexing /usr.
Print current status of shared_foo in 'scons -h'.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5966 8ced0084-cf51-0410-be5f-012b33b47a6e
The new default wiiuse wiimote read timeout of 30ms has been overridden previously by the default 10ms from the wiimoteplugin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5965 8ced0084-cf51-0410-be5f-012b33b47a6e
Of course, this doesn't do much good without another shader compiler..
WIP of OS X application bundle building.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5961 8ced0084-cf51-0410-be5f-012b33b47a6e
autoconfiguration tests. Some versions of gcc care enough about ANSI C
to complain about this.
Use the Linux install hierarchy conventions on other Unices as well.
XKeysymToString returns NULL on unknown keysyms, which is not a valid
std::string initializer.
There appears to be some disagreement regarding the second parameter
to iconv(). Some versions/installations have it as const, others don't.
Unfortunately, due to wonderful C++ brain damage, implicit conversion
from const to non-const doesn't work here.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5945 8ced0084-cf51-0410-be5f-012b33b47a6e
- More removal of unnecessary code
- Windows: Modification of Wiiuse_Find under windows,
instead of always deleting and recreating the whole wiimote_t struct, we do maintain the old one,
adding/removing new wiimotes to/from it
- some wiimote bugfixes, see below for details
Windows related stuff:
Fixed most of the disconnection issues (single and mulitple real wiimotes, both wiimote plugins) (I haven't had a disconnect msg in hours anymore(ms stack)).
Rumble bug should be fixed now(both plugins,pls verify).
Fixed some pair up issues( sometimes you had to press the pair up button up to 3 times, till it paired up your wiimote).
More dongles might be now supported via ms stack, pls try and report back!
Fixed a problem where multiple wiimotes would swap slots on pair-up/addition of a real wiimote (2-4 real wiimotes) (both plugins, but not integrated into new plugin).
Improved ingame auto-pairup for real wiimotes(thx to the new wiiuse_find routine).
Fixed a bug on setting wiimote timeouts, which means changing the timeout was just a dummy earlier.
Most of the stuff concerns stuff in the old wiimote plugin, dont worry, in the end it's important for both plugins. It will get ported to the new plugin sooner or later.:')
Some minor stuff.
This might break osx/linux build and maybe the new plugin realwiimote-wise only. Thx to glennrics to pointing me to some breakings on linux, I didn't fix them all.
PS I hope i haven't forgotten anything, enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5940 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a DSPCORE_STOP state. The DSP-LLE debugger window segmentation faults if it is openned when a game is not running.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5931 8ced0084-cf51-0410-be5f-012b33b47a6e
Should revisit and make the distinction more explicit.
Put the Data and Sys directories under Resources in the OS X app bundle.
Construct config.h (now lower-case to avoid confusion with other Config.h
instances in the tree) in the root. One tiny step towards a read-only
and cross-buildable source tree.
Some minor bits of non-Linux Unix portability.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5921 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
Ryan Houdek