db196d8c5b
Jit64[IL]: fix float conversions
...
Floating-point is complicated...
Some background: Denormals are floats that are too close to zero to be
stored in a normalized way (their exponent would need more bits). Since
they are stored unnormalized, they are hard to work with, even in
hardware. That's why both PowerPC and SSE can be configured to operate
in faster but non-standard-conpliant modes in which these numbers are
simply rounded ('flushed') to zero.
Internally, we do the same as the PowerPC CPU and store all floats in
double format. This means that for loading and storing singles we need a
conversion. The PowerPC CPU does this in hardware. We previously did
this using CVTSS2SD/CVTSD2SS. Unfortunately, these instructions are
considered arithmetic and therefore flush denormals to zero if non-IEEE
mode is active. This normally wouldn't be a problem since the next
arithmetic floating-point instruction would do the same anyway but as it
turns out some games actually use floating-point instructions for
copying arbitrary data.
My idea for fixing this problem was to use x87 instructions since the
x87 FPU never supported flush-to-zero and thus doesn't mangle denormals.
However, there is one more problem to deal with: SNaNs are automatically
converted to QNaNs (by setting the most-significant bit of the
fraction). I opted to fix this by manually resetting the QNaN bit of all
values with all-1s exponent.
2014-02-12 23:12:15 +01:00
c25c4a6e20
x64: add support for some x87 instructions
2014-02-12 22:45:01 +01:00
5e0b8b3477
Rename "JITIL experimental recompiler"
...
This changes it to "JITIL Recompiler (experimental)"
2014-02-12 10:21:02 -05:00
bbd58b8f6a
change AI sampling rate based on framelimit
2014-02-11 14:53:53 +01:00
ca9fd64df9
controll the interpolation frac by the fifo size
2014-02-11 14:35:19 +01:00
d20dbbc92f
audiocommon: sync mixer by fifo instead of estimate values
2014-02-11 07:25:58 +01:00
2956ffa5be
audiocommon: remove 1:1 interpolation
...
The usual one is 32->48 khz interpolation. So there is no need in a special 1:1 interpolation only for performance.
2014-02-11 07:25:58 +01:00
3218f6cca8
x64: drop instructions that don't exist
...
These instructions don't exist in hardware although I agree that they
would be useful for our purposes ;)
2014-02-11 05:22:53 +01:00
d2038049f5
Replace all include guard ifdefs with "#pragma once"
2014-02-10 18:07:16 -05:00
532cd44003
Use float to calculate the fps/vps
...
This will round internally, so 59.99 fps will now be shown as 60 fps.
2014-02-10 16:08:03 +01:00
a51b5f7815
Drop framelimit by fps
...
Framelimit by fps can't be done per coretiming
2014-02-10 16:08:03 +01:00
f7dc918057
Throttle by coretiming event instead of VI
...
VI isn't called as regular as we want to, so we have to create a new throttling event called regularly by coretiming.
Atm we throttle every 1 ms when we are too fast and skip throttling when we lack 40ms (to avoid fast boosts after slowdowns)
2014-02-10 16:08:03 +01:00
f5408c3f52
Clarify an if statement in NetPlayClient.cpp. See: https://github.com/LaurentGomila/SFML/issues/26 .
...
This was simply an error in documentation. It actually returns an sf::Socket::Status enum value as a result.
2014-02-10 09:26:29 -05:00
32bfcc034f
Some tidy up of sprintf to StringFromFormat
...
Includes a small fix to SetupWiiMemory
2014-02-10 17:25:18 +13:00
8d25e12085
Merge pull request #54 from lioncash/cleanup
...
Cleanup mismatching struct/enum indentations.
2014-02-09 19:26:15 -06:00
28b5c8be47
Merge pull request #53 from lioncash/remove-another-xchg
...
Remove function Xchg from SWStatistics.cpp.
2014-02-10 02:01:21 +01:00
fc30597f7a
Remove function Xchg from SWStatistics.cpp. Like the one previous, this can be replaced with std::swap
2014-02-09 19:55:44 -05:00
ebb48d019e
Clean up some struct indentations
...
Also cleaned up the indentations of some variable declarations.
2014-02-09 19:40:11 -05:00
0030784cbf
Merge pull request #38 from Sonicadvance1/GLExt-lessfail
...
Cleanup GLExtensions on how it fails.
Fixes Mesa with buffer_storage patches and no direct_state_access.
2014-02-09 17:48:34 -06:00
40182a48a5
Cleanup enum indentations.
2014-02-09 16:16:10 -05:00
e59f770ccb
Revert "Merge pull request #49 from Parlane/sprintf_tidy"
...
Change broke the build on Debian stable.
This reverts commit 28755439b364e01ec763
2014-02-09 16:14:13 +01:00
9da6900595
Merge pull request #12 from Armada651/osx_rumble
...
OS X Rumble Support
2014-02-09 16:10:07 +01:00
2063eddfa3
ForceFeedback: Fixed scoping bug
...
Previous code relied on a destroyed variable to still be valid.
2014-02-09 17:04:05 +09:00
992b91c082
ForceFeedback: Don't depend on the force_type_name index.
...
Instead use a for-each loop, compare GUIDs and save the name pointers.
2014-02-09 17:01:45 +09:00
c6d650c058
ForceFeedback: Add OSX rumble support
2014-02-09 17:01:45 +09:00
02a95c139e
ControllerInterface: Move DInput ForceFeedback support to a seperate class
2014-02-09 17:01:38 +09:00
6a5cd02629
Cleanup GLExtensions on how it fails.
...
If there is an issue with a reported extension, disable it instead of failing out entirely.
Fixes an issue with buffer_storage that I had overlooked as well.
2014-02-08 19:50:12 -06:00
9f91769def
Improve GLExtensions compile time.
...
This changes from using logical and to bitwise and, which causes the compile time to drop from an absurd amount of time to around five seconds on my
crappy laptop.
2014-02-08 15:04:17 -06:00
ebff7974c3
Some tidy up of sprintf to StringFromFormat
2014-02-08 14:32:48 +13:00
64e01ec763
Merge pull request #48 from Parlane/SetupWiiMemory_tidy
...
Tidy up SetupWiiMemory
2014-02-08 00:22:24 +13:00
4f97666bfd
Merge pull request #20 from degasus/pulseaudioRewrite
...
Pulseaudio: rewrite the pa backend with the async api
2014-02-07 11:51:25 +01:00
6b980cbf30
Tidy up SetupWiiMemory
2014-02-07 19:00:34 +13:00
70e2ed320d
Revert "Merge pull request #47 from lioncash/remove-stringfromint"
...
Breaks Android build.
This reverts commit 12d026c5446d678490f5
2014-02-07 00:26:33 +01:00
ab124b96c4
Atomic Stores / Loads
2014-02-07 00:20:10 +01:00
5c646d334a
Pulseaudio: rewrite the pa backend with the async api
...
The default async api allow us to set some latency options. The old one (simple API) was the lazy way to go for usual audio where latency doesn't matter.
This also streams audio, so it should be a bit faster then the old one.
2014-02-07 00:20:10 +01:00
12d026c544
Merge pull request #47 from lioncash/remove-stringfromint
...
Remove function StringFromInt from StringUtil.cpp/.h. C++11 has std::to_string for this now.
2014-02-07 00:19:15 +01:00
6d678490f5
Merge pull request #46 from Sonicadvance1/Android-removeDLCache
...
Remove Cache DL option from Android UI
2014-02-07 00:18:40 +01:00
4c6d4cc270
Merge pull request #41 from Parlane/printf_warnings
...
Give StringFromFormat a printf format attribute.
2014-02-07 00:18:12 +01:00
05742ffd48
Remove function StringFromInt from StringUtil.cpp/.h. C++11 has std::to_string for this now.
2014-02-06 18:08:31 -05:00
3666178f85
Remove Cache DL option from Android UI
...
This option has been removed entirely from Dolphin, so remove the option from Android
2014-02-06 17:02:38 -06:00
7a9f7bfa83
Fix a typo in EGL.h for setting mode.
...
Seems to have been a copy and paste issue where SetMode would always set to DETECT
This isn't right since mode should be set correctly by SetMode
2014-02-06 21:41:11 +00:00
70d2592ffb
Fix warnings found by StringFromFormat having printf style checking.
2014-02-07 01:38:08 +13:00
09cc7e2ddf
Give StringFromFormat a printf format attribute.
...
It gives StringFromFormat printf style arguments that should be type-checked against a format string.
2014-02-07 01:10:04 +13:00
9ac6e35b5f
Add static and const qualifiers to the maps.
2014-02-06 03:23:13 -05:00
78356ce184
Simplified GetAreaCode() and GetHardwareModel() to simply use a map in comparisons.
2014-02-05 19:59:13 -05:00
9a24ba343b
Merge pull request #34 from lioncash/geckocode-foreach
...
Change some for+iterator loops in GeckoCode.cpp and GeckoCodeConfig.cpp into foreach loops.
2014-02-05 17:07:40 +01:00
249b00c469
Change the modified parameter in the Clamp function to be a pointer.
...
Makes it easier to identify the one being modified.
2014-02-05 04:04:35 -05:00
6b87a0ef20
Introduce a generic clamp function to clean up some similarly duplicated code.
2014-02-04 20:43:07 -05:00
8039963858
Add const qualifiers to two foreach loop variables for consistency.
...
Also fix a vector include I happened to notice. Should be "<vector>" not "vector"
2014-02-04 19:44:02 -05:00
59e2179172
Merge pull request #35 from lioncash/videocommons-kill-xchg-in-statistics
...
[VideoCommon] Eliminate the function Xchg in Statistics.cpp. std::swap does the same thing.
2014-02-04 16:40:25 -08:00
6d9cd07bb9
[VideoCommon] Eliminate the function Xchg in Statistics.cpp. std::swap does the same thing.
2014-02-04 19:35:27 -05:00
a73a600343
Fix name conventions of some of the foreach loop variables.
2014-02-04 19:30:46 -05:00
63700ad28a
Change some for+iterator loops in GeckoCode.cpp and GeckoCodeConfig.cpp into foreach loops.
2014-02-04 19:19:48 -05:00
af24ed782d
Merge pull request #14 from degasus/uboWorkaroundRemove
...
OGL: Remove non-UBO code path.
2014-02-04 14:05:55 -08:00
00089433a6
Merge pull request #31 from Sonicadvance1/slowmemfix
...
[JITARM] Fixes an issue in the slowmem path that causes grey THP movies,...
2014-02-04 12:55:43 -08:00
57f86f7f52
[JITARM] Fixes an issue in the slowmem path that causes grey THP movies, and issues of games not working like Mario Kart being incapable of getting ingame. This was due to me forgetting an instruction.
2014-02-04 13:44:26 -06:00
442796b681
Jit64IL: nits
2014-02-04 09:09:06 +01:00
0c2a826693
Merge pull request #29 from lioncash/remove-pointless-cstr
...
Remove a pointless c_str() call in FileUtil.cpp.
2014-02-03 19:48:53 -08:00
7ebc829b17
Remove a pointless c_str() call in FileUtil.cpp. The function takes a string in it's parameter
2014-02-03 21:31:12 -05:00
36f6ec8b89
Merge pull request #27 from delroth/swcp-struct-fix
...
SWCommandProcessor: fix the CPReg structure fields
2014-02-03 16:42:05 -08:00
8ef57064b2
Silence warning
2014-02-04 01:30:39 +01:00
8ab6ed4b49
SWCommandProcessor: fix the CPReg structure fields
...
This structure fields should match byte-to-byte the layout of MMIO registers:
it is addressed using the MMIO reg address when doing a CP MMIO read. This was
unfortunately not the case, causing CP reads to be mostly broken with the
software renderer.
2014-02-04 01:16:14 +01:00
3363b396af
Merge pull request #23 from lioncash/sorta-large-input-cleanup
...
Larger cleanup to input-related source files (this time using unique_ptr).
2014-02-02 15:11:15 -08:00
e96f464eb5
[VideoCommon] Remove references to now non-existant files OpenCL.h and OpenCL/OCLTextureDecoder.h in the Visual Studio vcxproj file.
2014-02-01 21:52:06 -05:00
3efb0aa5f7
Purely stylistic cleanup of Core/HW/WiimoteEmu/Attachment/* files.
...
Also cleaned up WiimoteEmu.h as well.
2014-02-01 19:13:38 -05:00
c31a623780
Clean up InputConfigDiag.cpp.
...
Changes a bunch of for+iterator loops into foreach loops.
2014-02-01 19:02:32 -05:00
557015626a
Introduce the usage of unique_ptr into the InputCommon ControlEmu.h class. Allows for the automatic handling of resource deallocation.
2014-02-01 17:20:35 -05:00
6089e4470a
OGL: remove ubo workaround
...
This was only keeped for some broken mesa versions. Meanwhile most used versions should be fixed for almost a year.
2014-02-01 22:33:45 +01:00
97119d0e89
Merge pull request #18 from lioncash/small-jit-macro-cleanup
...
Move two macros (JITDISABLE and INSTRUCTION_START) into JitBase.h.
2014-02-01 09:29:00 -08:00
31c3bee5bc
VertexShaderGen: fix D3D posmtx attribute regression by VertexLoaderCleanup branch
...
Sorry, I'm too dumb too test my code. I hope this will work fine now.
2014-02-01 11:35:46 +01:00
3dd31fe22b
Merge pull request #11 from degasus/VertexLoaderCleanup
...
Vertex loader cleanup.
2014-01-31 06:13:26 -08:00
0735fb7a52
Merge pull request #13 from degasus/dlCacheRemove
...
Remove Display List caching.
2014-01-31 03:42:06 -08:00
3437c7f060
VideoCommon: small VertexLoader(Manager)? refactoring
2014-01-31 07:31:03 +01:00
010a0d481a
VideoCommon: remove Cache Displaylist
...
This option was known to break every second game and only boost a bit.
It also seems to be broken because of streaming into pinned memory and buffer storage buffers.
v2: also remove dlc_desc
2014-01-31 07:30:55 +01:00
a65162f1cd
PortableVertexFormat: use AttributeFormat for posmtx attribute format
2014-01-31 07:19:34 +01:00
6c59b691b0
PortableVertexFormat: use AttributeFormat for texcoord attribute format
2014-01-31 07:19:34 +01:00
ef2d6e7d53
PortableVertexFormat: use AttributeFormat for color attribute format
2014-01-31 07:19:34 +01:00
b38ef39ab7
PortableVertexFormat: use AttributeFormat for normal attribute format
2014-01-31 07:19:34 +01:00
210f4f3e55
PortableVertexFormat: add a struct which hold all needed information for every vertex and use this for position
...
atm, position attribute is hardcoded both in VertexLoader and in backends.
v2: fix coding style + cleanup lookup table
2014-01-31 07:19:25 +01:00
89001accd8
Move two macros that literally doesn't change across all JIT platforms (JITDISABLE and INSTRUCTION_START) and simply have it in the JitBase.h source file. This way the macro is just located in one spot rather than 6 places.
2014-01-30 22:11:39 -05:00
825c5f689b
Remove some unnecessary comments, as pointed out by Matt_P.
2014-01-30 20:21:18 -05:00
d91a5abba1
Light cleanup to a little bit of InputCommon. Replaces much of the iterators that litter this section of the codebase.
...
Also clean up a little bit of the comments that describe the interface classes.
2014-01-30 19:51:21 -05:00
fea3076241
Fix an unused variable within function GetScheduledEventsSummary() in CoreTiming.cpp.
2014-01-30 15:52:27 -05:00
02d1d8e6a0
NativeVertexFormat: swap unsigned / signed formats to match GX order
2014-01-30 11:12:10 +01:00
72cc6431e5
Merge pull request #9 from Sonicadvance1/Fix-AndroidRender
...
[Android] Fix Android not calling eglSwapBuffers
2014-01-29 15:08:32 -08:00
99b6c82ac3
[Android] Fix Adreno v53 development drivers rotating framebuffer
...
Older Qualcomm drivers rotated the framebuffer 90 degrees and this fix didn't work.
Now for some obscene reason it rotates a full 180 degrees.
This can at least be worked around by flipping around the image on our end.
2014-01-29 16:39:45 -06:00
990be70eb7
[Android] Fix Android not calling eglSwapBuffers
...
This isn't the cleanup that GLInterface needs, but for now it makes it so it'll swap and not just black screen
A cleanup to GLInterface will be coming in a couple weeks.
2014-01-29 15:54:55 -06:00
0f555d3a47
Remove two references to DX9 in VideoCommon.
...
DX9 isn't a backend anymore, so may as well get rid of them
2014-01-29 14:39:13 -05:00
ac2ebd264d
Merge pull request #5 from lioncash/android-info-fix
...
[Android] Fix three limits in GLES2InfoFragment.java.
2014-01-29 04:46:01 -08:00
74d9d7923e
Fix three limits in GLES2InfoFragment.java.
2014-01-29 07:35:07 -05:00
7ed9f5e63e
Upgrade Android API.
2014-01-28 23:35:13 +00:00
7b459d2463
Merge pull request #4 from lioncash/android-about-menu-info
...
Expand the Android app's about menu to include additional info about a user's device.
2014-01-28 15:19:05 -08:00
b1290a8630
OGL: remove version check for buffer_storage on windows
...
On Windows, nvidia don't give us their driver version, so we can't workaround any issues.
As buffer_storage is broken on some drivers, we wanted to disble it for them.
So we can't.
Luckyly only "some" released driver versions are affected as this extension is only available since some months. Let's hope that nobody have to use one of this driver version, else they will get a black screen ...
2014-01-28 15:15:26 +01:00
5d1db5d717
Fix compilation
2014-01-27 21:40:28 +09:00
76019848a4
Fix coding style
2014-01-27 21:24:35 +09:00
0eadc2e2a4
Implement SwapInterval for AGL interface
2014-01-27 21:11:03 +09:00
b9e7749fe6
[Android] Implement CPU info retrieval within the about menu.
...
ARM only at the moment. Could potentially support x86 and MIPS if necessary.
Capable of parsing the manufacturer codes and part IDs of some (but not all part numbers). If anyone knows of part numbers that aren't in the list, please report them.
2014-01-26 21:37:43 -05:00
9b6c6fa9e4
BBox: Changed the rounding again, the old one fixed Paper Mario but had bugs in Mickey's Magical Mirror. This change fixes the glitches in both games.
...
Also fixed some compiler warnings.
2014-01-26 13:21:22 +00:00
d3fd0eddbb
OSX: don't avoid unsync mapping on nvida gpus just because the windows driver doesn't like it
...
OSX has their own driver, so performance issues aren't shared with the nvidia driver (unlike the closed source linux and windows nvidia driver). So now they'll also use the MapAndSync backend like all other osx drivers.
fixes issue 6596
I've also cleaned up the if/else block selecting the best backend a bit.
2014-01-26 11:00:29 +01:00
6f74f59427
[Core] Remove an unnecessary pragma directive from EXI_Channel.h.
...
Dolphin uses warning level 3 in VS. This warning is only triggered in warning level 4.
2014-01-25 17:12:59 -05:00
e94a6f07f4
Fix warning
2014-01-25 21:42:44 +01:00
23b8465621
BBox: fix for a small rounding issue.
...
The new chapter title in Paper Mario TTYD had a small graphical bug due to the new code because it read one extra pixel, this fixes it.
I hope this gets everything, I though I had checked most bugs and yet here I am, commit-spamming...
2014-01-25 19:13:32 +00:00
90a7e053c5
Merge branch 'master' of https://code.google.com/p/dolphin-emu
2014-01-25 18:06:58 +00:00
5f14f0e3ce
BBox: read from the proper world matrix index when transforming vertexes to screen coordinates.
...
Fixes some remaining bbox related bugs in Mickey's Magical Mirror and a slight graphical glitch in Paper Mario: TTYD when flipping and Vivian as your companion (I've been scratching my head for days to find this one).
2014-01-25 18:04:15 +00:00
b34fe2b8f1
x64: fix parameter names of WriteModRM()
2014-01-25 17:36:09 +01:00
cdfe58f7ed
Rewrote bounding box algotithm. Fixes issues 5967, 6154, 6196, 6211.
...
Instead of being vertex-based, it is now primitive (point, line or dissected triangle) based, with proper clipping.
Also, screen position is now calculated based on viewport values, instead of "guesstimating".
This fixes many graphical glitches in Paper Mario: TTYD and Super Paper Mario.
Also, the new code allows Mickey's Magical Mirror and Disney's Hide & Sneak to work (mostly) bug-free. I changed their inis to use bbox.
These changes have a slight cost in performance when bbox is being used (rare), mostly due to the new clipping algorithm.
Please check for any regressions or crashes.
2014-01-25 15:36:23 +00:00
dd42af9a7c
Videosoftware: Fix memory cleanup code.
2014-01-25 11:06:18 +13:00
a3d1b9aba7
Increase save state version.
2014-01-24 00:15:56 -05:00
202054708b
EGL: Fix android build broken by last commit
2014-01-23 19:41:07 -07:00
d4ff195cad
EGL: Properly set parent window.
...
In X with EGL and WX frontend enabled, running the emulator created
two windows. This was because the parent window was set incorrectly.
2014-01-23 19:20:22 -07:00
1898524c96
VideoCommon: fix "Buffer not large enough for all vertices!"
2014-01-24 00:10:21 +01:00
fd8757a64b
Fix OpenGL 2.1 devices that support everything we need.
...
The only two devices that do this are Mesa software rasterizer and Intel Ironlake(With a few hacks).
Basically since it doesn't support OpenGL 3.0, it can't grab the version the new way.
So failing that, it sets to GL 2.1, and continues.
Further along, on Ironlake at least, it tries grabbing the extensions the new GL 3.0 way and fails.
So have a fallback that grabs the extensions string the old way, in probably the most elegant way possible.
2014-01-23 16:02:53 -06:00
65121cf9a9
OpenGL: remove unused OpenGL headers
2014-01-23 18:52:57 +01:00
1ff681a412
D3D: move streaming buffer fallback into D3D backend
...
Neith OGL nor VideoCommon doen't use it, so there is no need to have it in VideoCommon.
2014-01-23 15:27:18 +01:00
62f1905978
VideoCommon: don't save streaming fifos into savestate
2014-01-23 15:12:31 +01:00
ff002320a5
OpenGL: Stream vertices + indices
2014-01-23 15:12:31 +01:00
52feed04db
VideoCommon: allow backends to set the buffer pointer as they want to
2014-01-23 15:12:31 +01:00
128fcdac26
OpenGL: refactor all of our StreamBuffers
...
The old way was to use big switch/case statements based on a type of buffer.
The new one is to use inheritance.
This change prohibits us to change the buffer type while running, but I doubt we'll ever do so.
Performance should also be a bit better. Also a nice cleanup.
Added some comments about this different kind of buffers.
2014-01-23 15:12:31 +01:00
be1fee6d74
OpenGL: change StreamBuffer in a streaming way
...
This is a bit slower on map_and_* because of flushing and _very_ much slower on buffer(sub)?data because of a new memcpy.
But this design allow us to decode directly into a gpu buffer, eg vertexloader will profit :)
2014-01-23 15:12:31 +01:00
650bae12e1
Bit of a failure. Fixes 6964.
...
I was attempting to grab wglSwapIntervalEXT prior to having a valid WGL context.
This was doomed to fail.
2014-01-23 08:04:33 -06:00
07db7520bf
[GLExt-Cleanup] This cleans up some extra bits unneeded in the extension headers
...
gl.h and glext.h provide most of the function pointer typedefs and defines for extensions and core features.
The only one it doesn't provide is GL 1.1 function typedefs, but this is to be expected.
If anything needs defines or typedefs in their header in the future, that's as easy as before.
2014-01-23 07:11:13 -06:00
391d26d3bf
[DolphinWX] Prevent hotkeys from being assigned to more than one button/function.
...
Prior to this commit it was possible to assign the same keycode to more than one button.
ie. Say I assigned Open with the hotkey Ctrl+O; well, it was possible to also add it to another function as well, which leads to hotkey clashing.
Now, say I assign Open with Ctrl+O, but then assign that same hotkey to Refresh List; it will unbind the hotkey from Open and then assign it to refresh list.
2014-01-22 18:28:59 -05:00
521aa631dc
[Android] Parse integer ranges in the GLES3 info tab.
...
The info we retrieve will only ever have 2 elements given back to us.
2014-01-22 12:28:46 -05:00
36863bf7b8
[Android] Get rid of the version check class in VideoSettingsFragment.java. Not needed anymore since the introduction of the EGLHelper class. Also decouples some classes from the VideoSettingsFragment.java class (yay).
...
- Minor other change is that the EGL helper fields in GLES3InfoFragment.java, GLES2InfoFragment.java, and GLInfoFragment.java are made final.
2014-01-22 11:56:25 -05:00
5c4d087e8f
[Android] Greatly clean up the previous commits. Now here is the long list of cleaned up things:
...
- Spaces -> Tabs | Consistency
- Javadoc everything that was added and not documented.
- Remove duplicated code regarding the adapter that used to reside in DolphinInfoFragment.java. Now it resides in AboutActivity.java without a second duplication of it.
- Properly retrieve all of the contexts in the EGL initialization in EGLHelper.java.
- Remove the attribute EGL_RENDERABLE_TYPE from the pbuffersurface attributes in EGLHelper.java. With this present, the EGL context will always fail to reinitialize if destroyed and attempted to be recreated.
- Break the inner class Limit within GLES2InfoFragment.java, GLES3InfoFragment.java, and GLInfoFragment.java into its own single class. Greatly reduces code duplication.
- Introduce a Type enum into Limit.java (one of the wildly rare cases in Java where an enum is actually an OK solution). Removes duplicated constants from the Java files stated in the previous bullet note.
- Add a copyright comment to the top of EGLHelper.java. Forgot to do this initially, my bad.
- Add some missing override annotations to GLES2InfoFragment.java, GLES3InfoFragment.java, and GLInfoFragment.java.
- Use StringBuilders in the previously mentioned three Java files. This is better than using a String in this instance, as the String object won't have to be recreated multiple times (ala concatenation).
- Fix some constant accessors in the previously mentioned three Java files.
- Added the 'final' modifier to the above three classes and to Limit.java. These classes serve a single purpose only, and are not intended to be inherited.
2014-01-22 00:41:23 -05:00
7e9b8d18a7
[android-about-menu-info] Add desktop OpenGL tab population.
...
Since showing every single limit that desktop OGL supports is crazy, Let's just show the basic information, and extensions.
2014-01-21 17:55:00 -06:00
d3ccf1c7b5
[android-about-menu-info] Have information populate the GLES2 and GLES3 tabs.
...
There is a /lot/ of information in these tabs, we may have to think about changing how the information looks
OpenGL isn't done yet since there are a million limits on desktop GL, may just show a few things and extensions there.
2014-01-21 17:45:39 -06:00
3cb5bb3b30
VertexLoader: temp class for reader/writer
2014-01-21 23:44:51 +01:00
0b97b33ceb
VertexLoader: inline destionation buffer
2014-01-21 19:23:07 +01:00
c613868f57
VertexLoader: load scale factor as const, this will save some assembler instructions
2014-01-21 18:54:16 +01:00
f90fe90320
fix windows debug comile
...
This is broken because of revision ebbf1d392b
2014-01-21 14:23:50 +01:00
ebbf1d392b
VideoCommon: merge trivial parts of VertexManager::Flush
2014-01-21 10:47:00 +01:00
60632fda6f
OpenGL: remove small optimization
...
This one was introduced to reduce the glBindTexture and glActiveTexture calls. But it was quite a bit of logic and only an improvment on uploading/creating a texture, which is done rarely.
2014-01-21 10:34:48 +01:00
fe02833f13
OpenGL: fix our ubo workaround when blend_func_extended is missing
2014-01-21 10:03:05 +01:00
0dc437e94d
[Android] Finally check if regular OpenGL is possible on devices and display/hide it's fragment based upon this in AboutActivity.java.
...
Also added another constructor to EGLHelper which can be used to quickly query for information.
2014-01-21 00:12:40 -05:00
8b2c540544
Finally Merge branch 'videosoftware-xfb'
...
This adds xfb support to the videosoftware backend, which increases it's
accuracy and more imporantly, enables the usage of many homebrew apps
which write directly to the xfb on the videosoftware backend.
Conflicts:
Source/Core/VideoBackends/Software/SWRenderer.cpp
Source/Core/VideoBackends/Software/SWmain.cpp
2014-01-21 00:10:00 +13:00
2c8340e1dc
Move GLInterface.h into GLInterface directory
2014-01-20 00:46:21 -07:00
4b3c338930
Merge Platform.h into GLInterface.h
2014-01-20 00:32:01 -07:00
f8abdbf91a
[Android] Initial introduction of the EGLHelper utility class. Should simplify all interop with the EGL/GL APIs. Not hooked up yet. However it is entirely functional.
2014-01-19 18:29:43 -05:00
683dbc09ac
Stop building GLExtensions.cpp twice(One in GL, one in software). We don't need to build it twice, this'll save a bit of time in the build process.
...
Also a bit of spacing cleanup.
2014-01-19 11:37:37 -06:00
84aa98a5a4
wayland: Add bits required to run as a wayland client.
2014-01-19 10:36:20 -07:00
21b0252e27
Jit64: disable non-IEEE mode emulation
...
I give up. Merging the ppc_fp branch has caused issues in numerous games
and I can't find the bug. I'm leaving this merged to enable easy
recompilation for people who would like to play games that benefit from
non-IEEE mode emulation (e.g. Starfox Assault).
2014-01-19 09:36:08 +01:00
4a81baff3f
Reenable vsync after releasing tab even if frame limit is disabled.
2014-01-19 02:48:59 -05:00
5d26bf6d9d
Rename our GLInterface class function 'GetProcAddress' in order to not have clashing function names due to Windows.
2014-01-18 14:18:32 +00:00
bea484e12f
Move Win32 specific function grabbing fallback to WGL.cpp. Fixes issue 6964.
2014-01-18 14:10:24 +00:00
839df31347
Merge of GL-AutoChoose.
...
This branch is the final step of fully supporting both OpenGL and OpenGL ES in the same binary.
This of course only applies to EGL and won't work for GLX/AGL/WGL since they don't really support GL ES.
The changes here actually aren't too terrible, basically change every #ifdef USE_GLES to a runtime check.
This adds a DetectMode() function to the EGL context backend.
EGL will iterate through each of the configs and check for GL, GLES3_KHR, and GLES2 bits
After that it'll change the mode from _DETECT to whichever one is the best supported.
After that point we'll just create a context with the mode that was detected
2014-01-18 04:11:59 +00:00
5a599d472e
Merge branch 'GLExtensions'
2014-01-17 16:49:51 +01:00
304adc6e0d
IndexGenerator: inline all variables
...
As we do lots of writes to *Iptr, the compiler isn't allowed to cache any shared variable (neither index nor Iptr itself).
This commit inlines Iptr + index into the index generator functions, so the compiler know that they are const.
2014-01-17 16:34:53 +01:00
1d6425bd5e
IndexGenerator: drop unused variable
2014-01-17 16:34:53 +01:00
6b01839525
VideoCommon: merge triangle+list+point index buffers
...
We are used to render them out of order as long as everything else matches, but rendering order does matter, so we have to flush on primitive switch. This commit implements this flush.
Also as we flush on primitive switch, we don't have to create three different index buffers. All indices are now stored in one buffer.
This will slow down games which switch often primitive types (eg ztp), but it should be more accurate.
2014-01-17 16:34:53 +01:00
e932a349e8
[GLExtensions] fixup for missing changes on rebase
2014-01-17 16:10:10 +01:00
29e0a90b88
[GLExtensions] Rename internal GetProcAddress function since it clashes with the global Windows function. Fix Windows function pointer grabbing.
2014-01-17 16:06:46 +01:00
3d4d3f6b11
[GLExtensions] Remove a bunch of unneeded headers. Fix Linux+EGL compiling. Move include to glx.h around to work around it including global GL/gl.h
2014-01-17 16:06:29 +01:00
6cdb05b633
[GLExtensions] OpenGL 3.0 also added GL_ARB_map_buffer_range to core.
2014-01-17 16:06:23 +01:00
a5ffe9932a
[GLExtensions] Future proof ourself by putting the default: instance on the top, so we'll grab extensions if they support something newer. Handle older GLVersions in the case they get that far.
2014-01-17 16:06:18 +01:00
2a11fead5c
[GLExtensions] Populate the extension list for OpenGL implementations that don't show core extensions.
2014-01-17 16:06:13 +01:00
0ea6718d99
[GLExtensions] Fix OS X build.
2014-01-17 16:06:08 +01:00
34c9a33807
[GLExtensions] Remove AGL GetProcAddress. Change dlsym to using RTLD_NEXT. Enable dlsym fallback for OS X
2014-01-17 16:06:03 +01:00
ca96274936
[GLExtensions] Make sure to link against libdl since we use it to grab GL function pointers in Linux/Android in the case the GLInterface->GetProcAddress fails.
2014-01-17 16:05:57 +01:00
45dfa3a481
[GLExtensions] Missed a couple USE_GLES3 compile time differences.
2014-01-17 16:05:52 +01:00
97dc20d1be
[GLExtensions] Pull in all the function pointers for OpenGL 1.1, This removes the need for a couple compile time differences between GL and GLES3 mode.
2014-01-17 16:05:40 +01:00
f308b878b2
[GLExtensions] Oops. Don't just outright disable these helper functions.
2014-01-17 16:05:34 +01:00
cfb8b43b4a
[GLExtensions] Don't fail out loading funciton pointers in both ES2 and ES3 modes.
2014-01-17 16:05:25 +01:00
fc1f8291d6
[GLExtensions] Make sure to initialize our function pointers with VideoSoftware as well.
2014-01-17 16:05:07 +01:00
eba0c21b5a
[GLExtensions] Fix Windows build.
...
Conflicts:
Source/VSProps/Base.props
2014-01-17 16:04:05 +01:00
17955fa025
[GLExtensions] Still had a GLEW lib hanging out in the CMake file for the software renderer.
2014-01-17 16:01:49 +01:00
2a8ee1a7ff
[GLExtensions] Hopefully fix OS X build.
2014-01-17 16:01:35 +01:00
f4bd7bdef0
fix windows build
...
add the GL include (back) to Base.props
use a similar technique to GLX.cpp (by Sonic) in WGL.cpp to get
wglSwapIntervalEXT without the WGLEW check
Conflicts:
Source/Core/VideoBackends/OGL/OGL.vcxproj
Source/Core/VideoBackends/OGL/OGL.vcxproj.filters
Source/VSProps/Base.props
2014-01-17 16:01:17 +01:00
10bd61a9d2
[GLExtensions] Dynamically pull in the GL 1.3 and 1.4 functions as well.
2014-01-17 15:56:54 +01:00
d5a7ea2041
[GLExtensions] KHR_debug on OpenGL ES 3 has a KHR suffix on their function pointers. In Desktop OpenGL there is no suffix. So handle this correctly. Make the GrabFunction macro slightly less evil, so update the init_* to reflect it. Thanks Bh44L for the suggestion.
2014-01-17 15:56:28 +01:00
d093276e93
[GLExtensions] Fix a typo in KHR_debug
2014-01-17 15:56:20 +01:00
a024c515c8
[GLExtensions] Remove glew includes from wgl and agl.
2014-01-17 15:56:04 +01:00
cf8865a6e5
[GLExtensions] Add ARB_buffer_storage to negate at least one null pointer instance.
2014-01-17 15:52:34 +01:00
71681de81a
[GLExtensions] Initial code drop for GLExtensions. This drops GLEW entirely from the codebase. This has been tested on Android and Linux+ATI. Of course untested on Windows and Apple. Also untested with Linux + EGL but should be fine there. There are most likely a couple of extensions I'm missing which would result in null pointer runs but not bad for the initial commit.
...
Conflicts:
CMakeLists.txt
Externals/GLew/glew.vcxproj
Externals/GLew/glew.vcxproj.filters
Source/Core/VideoBackends/OGL/CMakeLists.txt
Source/Core/VideoBackends/OGL/GLFunctions.cpp
Source/Core/VideoBackends/OGL/GLFunctions.h
Source/Core/VideoBackends/OGL/GLUtil.h
Source/Core/VideoBackends/OGL/Render.cpp
Source/VSProps/Base.props
2014-01-17 15:50:51 +01:00
770485ad04
VertexLoader: don't check for possible range
...
I(index) < std::numeric_limits<I>::max() is always true, so we don't have to check it
2014-01-16 22:07:48 +01:00
5eae39766b
enable buffer_storage on nvidia 331.38 on linux
...
it works fine here, and as the VSH is removed, this is the newest driver.
2014-01-16 17:51:38 +01:00
331af32038
fixup "Remove the ZTP speedup hack"
...
This fixes revision b49c09c36b
2014-01-16 00:26:49 +01:00
f1adc56a56
Remove vertex streaming hack.
...
NV has buffer_storage, AMD has pinned memory.
Both are better than that hack which shouldn't ever have been introduced in the first place.
2014-01-16 00:11:12 +01:00
b49c09c36b
Remove the ZTP speedup hack. Also remove useless debugging code, and a presumably outdated workaround (which was commented out).
...
Fixes issue 6875.
2014-01-16 00:11:12 +01:00
5e5db9fbc6
VideoCommon: cleanup of "components" usage
...
This "u32 components" is a list of flags which attributes of the vertex loader are present.
We are used to append this variable to lots of vertex generation functions, but some of them don't need it at all.
2014-01-15 16:58:36 +01:00
a561c436fc
Change the default GFX backend from D3D11 to OGL.
...
Rationale and discussion:
https://ml.dolphin-emu.org/archives/dolphin-dev/2014-January/000003.html
2014-01-14 21:57:32 +01:00
8b53385c54
Added a check for a redundant mov in the fastmem writes code.
...
Fixes issue 6905.
2014-01-13 22:18:19 +11:00
e00c3ce363
TextureConverter: remove implicit int->float convertion
...
They was used to check if we're writing to the first or second part of one pixel.
So this is now done with a boolean and a ternary operator.
2014-01-13 12:10:17 +01:00
9aff16e7c1
Fix stupid bug in Z16L depth texture efb2ram encoding shader.
2014-01-12 13:32:06 +13:00
e3d103f60c
Update some of the comments in DriverDetails.h for drivers that have fixed their bugs.
2014-01-11 07:31:47 -06:00
67f099af33
Enable buffer_storage for Nvidia drivers 332.21 and above.
2014-01-09 12:06:12 -06:00
95aa977d81
OGL: remove masking from streambuffer
...
We used this to disable pinned memory for index buffer, but as the detection
was reworked completely, it's just unused code.
2014-01-09 18:52:05 +01:00
eb310cbd1d
VideoCommon: disable efb access + perf querys on cph thread
...
The usual way to handle this kind of request is to rise a flag which the gpu thread polls.
The gpu thread itself either generates the result or just write zeros if disabled.
After this, it rise another flag which says that this work is done.
So if disabled, we still have the cpu-gpu round trip time. This commit just returns 0 on the cpu thread
instead of playing ping pong...
2014-01-09 18:37:59 +01:00
45f74840d6
Do not fastmem addresses that were constant propagated
2014-01-09 08:28:45 +01:00
48470a20ca
Code cleanup
...
Move enums for max SI and EXI devices to their respective .h file, and rename them.
Use only those enums in BootManager.cpp. Same thing in Movie.cpp
Change one instance of MAX_BBMOTES to MAX_WIIMOTES in Movie.cpp, since movies do not support balance board.
2014-01-08 20:36:27 -05:00
3046d0e701
NetPlay: Sync CPU engine between NetPlay clients/servers
2014-01-08 19:42:02 -05:00
216f4c927a
Fix copy and paste error in BootManager.cpp.
2014-01-08 19:37:51 -05:00
b55a4bb087
Slight optimization in the pixel shader. We are using pow(2.0, X) in place of exp2(X). This can be faster in places that don't optimize a pow to a exp2 in this case.
...
Notice this from here: http://cgit.freedesktop.org/mesa/mesa/commit/?id=847bc36a38d42967ad6bf0492fe90a4892d9d799
Intel Haswell GPU is 24 cycles for POW and 14 cycles for EXP2.
Maybe other GPUs don't optimize this either. Just be safe.
2014-01-08 16:40:31 -06:00
cdf69adcb0
Fix for previous commit. I was supposed to use GL_VERSION, not GL_RENDERER.
2014-01-07 19:35:06 -06:00
45964e4b46
[Android] Initial implementation of the extended info menu.
...
Most fragments are not implemented yet. This is just a working base framework for it.
2014-01-07 19:47:15 -05:00
d2e62796fc
Probe the GL_RENDERER string on Nvidia to grab the driver version.
2014-01-07 18:29:04 -06:00
7acc64eb0a
[Android] Reenable the bug for dynamic UBO array member accesses.
...
Some information on this bug since this isn't quite true.
Seemingly with the v53 driver, Qualcomm has actually fixed this bug. So we can dynamically access UBO array members.
The issue that is cropping up is actually converting our attribute 'fposmtx' to an integer.
int posmtx = int(fpostmtx);
This line causes some seemingly garbage values to enter in to the posmtx variable.
Not sure exactly why it is failing, probably them just not actually converting the float to an integer and just handling the float directly as a integer.
So the bug is going to stay active with Qualcomm devices until we convert this vertex attribute from a float to a integer.
2014-01-07 07:56:30 -06:00
55717ed216
D3D: Verbosify an error message.
2014-01-06 10:31:09 +00:00
e6676b4565
OpenGL: fix scaled efb2ram copys
...
This fix a regression in revision 687097d4bc
2014-01-05 18:19:17 +01:00
ed67d1ae2f
Fix the Zelda: The Wind Waker heat effect glitch.
...
Let's talk a bit about this bug. 12nd oldest bug not fixed in Dolphin, it was a
lot of fun to debug and it kept me busy for a while :)
Shoutout to Nintendo for framework.map, without which this could have taken a
lot longer.
Basic debugging using apitrace shows that the heat effect is rendered in an
interesting way:
* An EFB copy texture is created, using the hardware scaler to divide the
texture resolution by two and that way create the blur effect.
* This texture is then warped using indirect texturing: a deformation map is
used to "move" the texture coordinates used to sample the framebuffer copy.
Pixel shader: http://pastie.org/private/25oe1pqn6s0h5yieks1jfw
Interestingly, when looking at apitrace, the deformation texture was only 4x4
pixels... weird. It also does not have any feature that you would expect from a
deformation map. Seeing how the heat effect glitches, this deformation texture
being wrong looks like a good candidate for the problem. Let's see how it's
loaded!
By NOPing random calls to GXSetTevIndirect, we find a call that when removed
breaks the effect completely. The parameters used for this call come from the
results of methods of JPAExTexShapeArc objects. 3 different objects go through
this code path, by breaking each one we can notice that the one "controlling"
the heat effect is the one at 0x81575b98.
Following the path of this object a bit more, we can see that it has a method
called "getIndTexId". When this is called, the returned texture ID is used to
index a map and get a JPATextureArc object stored at 0x81577bec.
Nice feature of JPATextureArc: they have a getName method. For this object, it
returns "AK_kagerouInd01". We can probably use that to see how this texture
should look like, by loading it "manually" from the Wind Waker DVD.
Unfortunately I don't know how to do that. Fortunately @Abahbob got me the
texture I wanted in less than 10min after I asked him on Twitter.
AK_kagerouInd01 is a 32x32 texture that really looks like a deformation map:
http://i.imgur.com/0TfZEVj.png . Fun fact: "kagerou" means "heat haze" in JP.
So apparently we're not using the right texture object when rendering! The
GXTexObj that maps to the JPATextureArc is at offset 0x81577bf0 and points to
data at 0x80ed0460, but we're loading texture data from 0x0039d860 instead.
I started to suspect the BP write that loads the texture parameters "did not
work" somehow. Logged that and yes: nothing gets loaded to texture stage 1! ...
but it turns out this is normal, the deformation map is loaded to texture stage
5 (hardcoded in the DOL). Wait, why is the TextureCache trying to load from
texture stage 1 then?!
Because someone sucked at hex.
Fixes issue 2338.
2014-01-05 11:33:15 +01:00
c42f274e22
OpenGL: use shader 420pack if available to staticly bind ubo location
...
Bindung locations after compiling a shader stalls the driver. So if we manage not to bind anything after compilation, the lag would be reduced much.
2014-01-05 10:38:45 +01:00
4fff5ac90d
OpenGL: drop UBO-workaround usage for efb2ram shaders
...
It's just brainfuck to use this workaroung there. Just fetch the uniform location like all other util shaders.
2014-01-05 09:52:26 +01:00
01351795f0
TextureCache: Warn for invalid custom textures
...
At the moment, custom textures with:
- invalid mipmap size
- invalid aspect ratio
- non-fractional scaling factors
are allowed. But they can't be loaded fine by the backend, so generate a warning if someone trys to load them.
2014-01-03 14:30:12 +01:00
0f0a3cc509
ogl: clamp to edge for out of bound efb access
...
fixes issue 6898
OpenGL defaults are GL_REPEAT, which is even more unlikely than GL_CLAMP_TO_EDGE.
As I can't test the behavoir of the real hardware, I changed it to how it works before,
but I guess just clip the texture makes more sense.
2014-01-03 08:15:19 +01:00
509ec9cc99
Bootmanager.cpp fixes and clean up.
...
Some settings that bootmanger reads from game ini can be changed while a game is running, so we don't have to revert these back to what they were when starting the game, unless they were actually changed by the game ini.
Fix signed/unsigned warnings that pauldacheez pointed out.
2014-01-02 16:36:06 -05:00
450cacd092
Allow pad settings to be set via game ini.
2014-01-02 13:13:59 -05:00
e6497bca5a
[Android] Simplify instantiations of OverlayConfigButton.java. Also simplified resizeDrawable even more. We just acquire the resource instance and then get the display metrics directly.
2014-01-02 12:23:17 -05:00
5635c94a30
[Android] Simplify resizeDrawable in OverlayConfigButton.java.
...
Also add a missing override to onRestart in DolphinEmulator.java.
2014-01-02 11:53:28 -05:00
0faf696be7
Merge Fail. We don't disable BaseVertex on broken pinned memory.
2014-01-01 17:20:09 -06:00
d36355e45c
Merge branch 'buffer_storage'
2014-01-01 17:14:35 -06:00
7a818e05ef
I've never claimed to be a good coder.
2014-01-01 07:45:20 -05:00
8f34085172
Really fix android build.
2014-01-01 07:39:50 -05:00
777c62c67a
Fix android build.
2014-01-01 07:04:30 -05:00
8a765f8749
Allow wiimote source to be set via game ini.
2014-01-01 06:59:01 -05:00
1118226f27
Merge branch 'master' into buffer_storage
2013-12-31 19:18:30 -06:00
8d8b0fc884
Merge branch 'master' into buffer_storage
...
Conflicts:
Source/Core/VideoBackends/OGL/Src/Render.cpp
Source/Core/VideoCommon/Src/DriverDetails.cpp
Source/Core/VideoCommon/Src/DriverDetails.h
2013-12-31 15:41:50 -06:00
34692ab826
Remove unnecessary Src/ folders
2013-12-31 14:03:19 -05:00
43e618682e
Convert all vcxproj files to UNIX line endings
2013-12-31 14:03:18 -05:00
b6ad8bd712
HW: Remove unnecessary "../HW/" in include paths
2013-12-31 14:03:17 -05:00
70d4d973f9
TAP_Win32: Remove unnecessary Memmap.h include
2013-12-31 14:00:06 -05:00
6d63db96e9
Disable primitive restart on buggy OS X Intel HD 3000 drivers.
2013-12-30 18:26:55 -06:00
de16b7207c
D3D/OGL: Add a TODO noting that we don't support GX_CULL_ALL, most notably required for accurate zfreeze emulation.
2013-12-30 20:37:59 +01:00
3aa0a63fe6
VertexShaderGen: Remove Sonic Unleashed hack. Doesn't seem to be required anymore.
...
Either way, even if it's still needed for anything, this is not the correct way to fix the issue.
2013-12-30 20:28:07 +01:00
3cfa04b5cf
VertexShaderManager: Remove a hardcoded projection hack.
2013-12-30 19:26:10 +00:00
bbde075420
Software renderer: Add a zfreeze related TODO.
2013-12-30 20:18:53 +01:00
a5bfdbf6cd
Free performance for AMD+Linux. Instead of disabling BaseVertex due to pinned_memory. Just disable pinned_memory for the ELEMENT_ARRAY_BUFFER type which has issues with baseVertex(ELEMENT_ARRAY_BUFFER)+pinned_memory. In my two tests with this, I went from 5FPS to 11FPS in one test, and 2FPS to 6FPS in another.
2013-12-28 08:00:44 -06:00
0b31fc8f52
[buffer_storage] Temporary fix for Android/GLES3 just like how everything else is. Cleanup for this will be in a new branch.
2013-12-28 05:16:39 -06:00
8fdcba0c06
[buffer_storage] Code formatting changes suggested by Bh44L
2013-12-28 05:15:43 -06:00
935e1fdf99
[Android] Enable shader cache.
2013-12-28 04:55:39 -06:00
c8cdc81ce3
[ARM] Implement tw/twi
2013-12-28 04:43:07 -06:00
d8b7f4d73f
[Android] Support grabbing OpenGL extensions and a function for checking for support.
2013-12-28 01:08:52 -06:00
e04edd89cc
Support grabbing whichever OpenGL mode we are running under from GLInterface. GLES or GL
2013-12-28 00:58:08 -06:00
77ba051361
[buffer_storage] Add the CLIENT_STORAGE_BIT since we access the buffer more frequently on the client side than the server side. That is exactly what the hint is for.
2013-12-27 22:58:36 -06:00
8230da26fe
Fixed issue 6245. (ISO Path's "Remove" button not being disabled when it should be)
2013-12-27 17:16:28 -06:00
620bf0b304
Eliminate some Wiimote acceleration logic redundancy.
...
Yeah, I eliminated a total of 3 LSB of accel data in the process, but no one will notice.
2013-12-27 16:35:11 -06:00
c5695c987b
Revert "Reading shake force from calibration rather than a constant"
...
It didn't make sense. The math was nonsensical. Calibration data was somehow applied twice. I don't even.
This reverts commit 4dad640d5f
2013-12-27 16:00:59 -06:00
d8ceb97a60
[buffer_storage] Require GLEW 1.10 which has the new OpenGL 4.4 methods. Fixes linux build.
2013-12-27 15:37:31 -06:00
ce99921c20
[buffer_storage] Implement ARB_buffer_storage. Disable it for GL_ARRAY_BUFFER due to a bug in Nvidia's drivers that causes black screen with it.
2013-12-27 10:56:03 -06:00
4d1f113ab1
Fix some emulated wiimote turntable stupidness (DJ Hero controller). Happy Christmas!
...
Fixed issue 6865.
2013-12-25 15:33:33 -06:00
2ed24d5311
[Android] Fix the gradle build system to allow for building from terminal. It will now copy the library files correctly and sign the resulting apk.
2013-12-24 15:28:24 -06:00
a87e0e7489
Remove our GLU dependency. Fix static zlib
2013-12-23 16:01:34 -07:00
86b3719d14
[Android] Add a gradle build file for use with Android Studio 4.0
2013-12-23 12:26:55 -07:00
04b87e1dcc
Change a PanicAlert to OSD message.
2013-12-23 07:18:28 -05:00
42217fbd75
Fix the extended information status line that shows emulated mhz + idles skipped.
2013-12-21 17:58:04 -06:00
6737904c83
[Android] Stop copying assets that don't need to be copied anymore.
2013-12-21 16:20:14 -06:00
e697d7a2dd
[Android] Work around Qualcomm's broken garbage in their v53 drivers. This doesn't fix the issue, just a work around. This is the stupidest issue coming from Qualcomm. Now Dolphin Mobile won't crash immediately, but there are new SPS issues.
2013-12-19 17:30:39 -06:00
945b903499
Work around AMD's broken Linux drivers when it comes to pinned memory and base_vertex usage. It seems that using pinned memory with base_vertex disabled is quicker than the other way around.
2013-12-19 09:40:13 -06:00
a35b62358a
[Android] Things fixed in Qualcomm driver v53. GLSL Centroid usage. SHADER_INFO_LOG reporting 0 at all times. Some crazy nonsense that broke the FPS counter. Those are all fixed. glBufferSubData still makes the device do a OOM error, and is still stupidly slow to use. Many more bugs remain in this latest Qualcomm driver.
2013-12-18 22:23:26 -06:00
8c264a3964
In the shader log message, say if the error came from a PS or VS.
2013-12-18 22:21:14 -06:00
5eab3239bb
Jit64: load second operator for double intrutions
...
SSE do support non-vector instructions, but they _all_ overwrite the dest register
if the src location isn't a register. (wtf?)
So we have to load the src into a temporay register :(
2013-12-17 08:49:06 +01:00
2fad2a3e88
Revert "Jit64: use AVX instructions in some places"
...
and the fixes afterwards
This reverts commit ff91789773bcefa880e4710a0ff435ddaf29e039
2013-12-17 08:49:06 +01:00
1b617c736c
Add a non-tiny warning about CPUs that will silently desync.
2013-12-16 22:41:52 -05:00
d619ccee21
Remove the flawed, unused attempt to manually emulate Gecko codes.
...
Parsing Gecko codes (in any manner) is much like parsing HTML with regex
- that w̷a̶y̸ l̵i̷e̴s̵ m̴̲a̵͈d̵̝n̵̙ę̵͎̞̼̙̼͔̞͖͎̝s̵̨̬̱͍͓͉̠̯̤͙̝s̷͍̲̲̭̼͍͎͖̤̭̘. Luckily, with the embedded codehandler.bin,
the monstrosity may remain at only one implementation. Anyway, removing
the inserted_asm_codes thing probably speeds up the interpreter a bit.
2013-12-16 22:27:13 -05:00
07820aaa9e
Software renderer: Add linear interpolation of fog range adjustment factors.
2013-12-16 18:42:46 +01:00
2e1aa64958
[Android] Fix joysticks only capable of right/down movements. Also make it capable of using onscreen joystick even if controller 1 is bound.
2013-12-12 21:24:39 -06:00
d7be993889
Oops, I left a bit being set when it shouldn't have been.
2013-12-12 22:35:05 +00:00
09680ccee6
Small cleanup in the EGL GLInterface.
2013-12-12 22:08:54 +00:00
50df037bb5
[Android] Fix gamepad input.
2013-12-12 14:42:25 -06:00
f9ff0bc55d
Have our OpenGL/ES context creation be less stupid.
2013-12-12 12:43:49 -06:00
2a0adc3972
[Android] Make our OpenGL ES 3 check in the UI less stupid.
2013-12-12 11:58:38 -06:00
40b3534319
[Android] Remove the now unused texture loader on the JNI side of things.
2013-12-11 20:09:54 -06:00
0e1e14b3a1
Fix Linux build.
2013-12-11 16:06:19 -06:00
424f7b094e
Fix Windows Build
2013-12-11 15:23:09 -06:00
eb3b933dd0
Remove all instances of OpenCL in the Dolphin Project. A brief history of OpenCL in Dolphin. OpenCL was originally added to the Dolphin codebase 1 month after it was released with OS X Snow Leopard in 2009. OpenCL was one of the largest group projects that Dolphin ever has had. The OpenCL texture decoder was originally aded with version 1.0 of the OpenCL spec; This version didn't have the capability of a OpenCL-OpenGL interop which would allow for uploading textures once and have it decoded directly to a OpenGL texure. This was to be worked out when the OpenCL 1.1 spec was released and allowed the interop. This work has never been done, and no one in the team is willing to work on it for various reasons. OpenCL has had the unreasonable expectation that it increases the performance of video games that require a large amount of EFB copies like NSMBW. In reality, enabling OpenCL just put the graphics card in a higher power mode which increased the game speed. This is due to the unfortunate effect of Dolphin tending to not push GPUs out of their lower frequency power savings modes. Thanks to everyone that had contributed to the OpenCL texture decoder.
2013-12-11 15:15:55 -06:00
c9d9081bf9
Use less brain damaged names for DLCache and TextureDecoder.
2013-12-11 20:35:12 +01:00
e0aa674c72
Minor const-correctness for some functions in FifoPlayer and some AudioCommon headers.
2013-12-11 08:43:58 -05:00
101bded6b3
Oops, don't use -lrt on Android either.
2013-12-10 16:35:44 -05:00
eaacf10f71
Fix an idiotic race condition when starting games in multiple Dolphin instances at the same time on Unix.
...
MemArena mmaps the emulated memory from a file in order to get the same
mapping at multiple addresses. A file which, formerly, was located at a
static filename: it was unlinked after creation, but the open did not
use O_EXCL, so if two instances started up on the same system at just
the right time, they would get the same memory. Naturally, this caused
extremely mysterious crashes, but only in Netplay, where the game is
automatically started when the client receives a broadcast from the
server, so races are actually quite likely.
And switch to shm_open, because it fits the bill better and avoids any
issues with using /tmp.
2013-12-10 16:20:52 -05:00
2d8515c0cf
VideoCommon: remove outdated copy of OGL::VertexManager::vFlush
2013-12-09 23:49:09 +01:00
134c89ef98
OpenGL: disable shader cache when ShaderDebugging is enabled
...
fixes 6859
2013-12-09 16:45:20 +01:00
42619c1d2d
Merge branch 'ogl-tex2d'
...
Conflicts:
Source/Core/VideoBackends/OGL/Src/TextureConverter.cpp
2013-12-09 13:04:14 +01:00
687097d4bc
OGL: use integer uniforms for efb2ram texture converter
2013-12-09 12:33:50 +01:00
55e8be595c
Fix "Entry Point Not Found crash on Windows Vista"
...
Fixes issue 6805.
https://code.google.com/p/dolphin-emu/issues/detail?id=6805
2013-12-08 18:01:49 -05:00
c405d92c41
fixed issue 6852.
2013-12-07 16:07:47 +09:00
4867937355
Add Read16/Read8 to the CBlobBigEndianReader so the key check is reading 8bit from the correct location to determin which key to use. Also change check to == 1 as suggested in the IRC channel on first implementation. Potentially fixes 6852.
2013-12-06 20:40:12 -06:00
14d9802ea4
Oops. Fix a typo in the DriverDetails change.
2013-12-06 12:18:20 -06:00
faf8792351
Support OS specific bugs in our DriverDetails.
2013-12-05 09:32:27 -06:00
2cbefa2905
PixelShaderManager: clear s_bViewPortChanged flag
...
This flag wasn't cleared at all, so we set our constants dirty every time...
This could fix some performance regressions because of revision 6798a4763e
2013-12-03 09:37:45 +01:00
edc879ce48
OpenGL: fix crash in revision 95aeedec19
...
Real xfb didn't provide any read_stride, so there is a division by zero.
This commit calculates the correct read_stride for real_xfb, so there is also no hack for texture vs xfb needed.
2013-12-03 00:09:37 +01:00
bc01785264
[Android] Fix an issue that occurs due to the warning dialog.
2013-11-30 19:48:08 -06:00
65ce711a21
[Android] 0.13 release.
2013-11-30 14:28:48 -06:00
020331383a
[Android] Fix alert when using crappy Qualcomm drivers.
2013-11-30 14:28:00 -06:00
2ad686a2a2
[Android-overlay] Z-button support.
2013-11-29 21:50:42 -06:00
b9f03444cd
[Android-overlay] Fix Java imports.
2013-11-29 21:32:27 -06:00
7bdd8191db
Merge branch 'master' into android-new-control-input-overlay
...
Conflicts:
Source/Android/src/org/dolphinemu/dolphinemu/settings/video/VideoSettingsFragment.java
2013-11-29 21:27:17 -06:00
00a25cdaf5
[Android-overlay] Disable Wiimote configuration until it is wired up.
2013-11-29 21:12:36 -06:00
f6e89356c7
[Android] Simplify some things in the overlay. Also Javadoc the new static function.
2013-11-29 20:06:39 -05:00
49eef423a8
[Android-overlay] Add the new overlay icons. Support configuring them. Disable hardfloat since it has issues since Dalvik doesn't understand passing floats due to ABI differences.
2013-11-29 18:37:33 -06:00
69137cff4c
Merge X11+D3D FreeLook feature into DolphinWX
...
This removes the redundant code and also implements this feature for OSX and Wayland.
But so it's dropped for non-wx builds...
imo DolphinWX still isn't the best place for this, but now it's in the same file as all other hotkeys. Maybe they'll be moved to InputCommon sometimes at once ...
2013-11-29 06:09:54 +01:00
95aeedec19
OpenGL: readback efb2ram with different strides at once
...
This is done with a pixel buffer object. We still have to stall the GPU, but
we only do it once per efb2ram call.
As the cpu can't access the vram, it has to queue a memcpy for the gpu and
wait for the gpu to finish this copy. We did this for every cache line which
is just stupid. Now we copy the complete texture into a pbo and readback this
at once. So we don't have to wait for lots of round-trip-times.
2013-11-26 20:05:49 +01:00
1138c2e155
OpenGL: reset EFB after efb2ram FB initialization
2013-11-26 04:07:59 +01:00
db9c586356
Revert "jit: change our linking module to be able to handle arbitrary exit addresses"
...
This shouldn't cause issues, but does in Windows. Revert for now.
This reverts commit 1aa06b8fa4
2013-11-25 16:56:04 -06:00
7f85c3215b
[Android] Add Javadoc to InputOverlayDrawableJoystick.
2013-11-25 17:18:31 -05:00
0b4cb2e15f
OpenGL: split real xfb + efb2ram framebuffers
2013-11-25 22:27:11 +01:00
76843b450b
[Android] Build the configuration window for the overlay programmatically. Moved the overlay configuration classes into their own package. Also launch the overlay config activity through the preference XML via an embedded Intent. Lets us remove code explicitly handling this.
2013-11-25 14:23:28 -05:00
7718c9959e
[Android-overlay] Multiple physical gamepad support.
2013-11-25 10:58:05 -06:00
11973d31c1
TextureConverter: remove WriteIncrementSampleX
2013-11-25 17:11:41 +01:00
421fd0e16e
Fix OpenGL ES 3.
2013-11-25 15:36:24 +00:00
64a1969e36
TextureConverter: fix scoping
2013-11-25 16:34:08 +01:00
2a2f2fd4eb
TextureConvertion: merge Write*Swizzler
2013-11-25 16:19:08 +01:00
9dbb262aab
Fix for OpenGL ES 3.
2013-11-25 15:11:06 +00:00
6750a81972
TextureConverter: Use integer math for swizzling
...
also move int(efb_coord) -> float(ogl_fb_coord) into WriteSampleColor
2013-11-25 15:49:13 +01:00
bcb31b09d3
TextureConverter: Use gl_FragCoord instead of uv0
2013-11-25 15:01:18 +01:00
a289e0604f
TextureConverter: remove D3D9 foo
...
This file is in VideoCommon, but as D3D11 doesn't use it and D3D9 is dropped, it's time to clean up.
2013-11-25 14:53:44 +01:00
454e1dd9a2
OpenGL: attributeless rendering for efb2ram
...
This wasn't as easy as we now have to cache also the uniform locations.
2013-11-25 13:03:35 +01:00
6ed3f82aff
OpenGL: attributeless rendering for postprocessing
2013-11-25 12:36:17 +01:00
38fe05b1df
OpenGL: attributeless rendering in emulate format changes
...
only cleanup
2013-11-25 12:27:54 +01:00
dd0b74ac15
OpenGL: cleanup efb2tex
...
Also use attributeless rendering. But we need the src rect, so set it by uniform.
If there is a slowdown here (I doubt as the driver likely has a fast path to update uniforms)
then we should check if this rect changes and only then update the uniform.
2013-11-25 12:19:34 +01:00
b93756df87
OpenGL: drop texture_rect hack
...
Everything is moved to texture2d (but often in a hacky way), so we don't need this global hack any more.
2013-11-25 09:05:50 +01:00
afcf0e65d1
OpenGL: fix emulate format changes for texture2d
2013-11-25 08:59:04 +01:00
146e435009
OpenGL: fix efb2ram for texture2D
...
This was hacky as hell. Our efb2ram shader generator is just freaked out.
2013-11-25 08:56:01 +01:00
b904d56036
OpenGL: fix efb2tex for texture2d
2013-11-25 08:43:55 +01:00
1a3e790d9e
OpenGL: fix xfb for texture2d
2013-11-25 08:38:00 +01:00
e8f23af10b
OpenGL: always use texture2d as efb
2013-11-25 08:32:41 +01:00
230e12ae8c
OpenGL: also remove VAO from xfb convertion
...
We use attributeless rendering, so officially we have to bind _any_ VAO.
As the state of this VAO doesn't matter, we don't have to switch it.
Also fix an AMD issue as they don't like to render from an empty VAO.
2013-11-25 07:38:20 +01:00
7ed8e6a29c
[Android] Fix the check for the Qualcomm graphics driver version for v53 drivers with the screen being rotated 90 degrees. Initialize the OpenGL information grabbing only once. Check for v14 Qualcomm drivers and spit out an error if the user tries selecting OpenGL ES 3.
2013-11-24 22:45:48 -06:00
da3eef1019
Fix the issue with COLOROUT not being defined anymore. Fix a issue where Mali shader compiler is idiotic in finding an overload for the mix function.
2013-11-25 00:06:29 +00:00
cb3dd6b94b
Merge branch 'master' into android-new-control-input-overlay
2013-11-24 17:10:24 -06:00
2c09e8fc5a
[Android] Enable hard-float support. Requires Android NDK r9b.
2013-11-24 16:43:53 -06:00
ba18f38e70
Merge branch 'master' into android-new-control-input-overlay
...
Conflicts:
Source/Android/res/values-ja/strings.xml
Source/Android/res/values/strings.xml
Source/Android/src/org/dolphinemu/dolphinemu/AboutFragment.java
Source/Android/src/org/dolphinemu/dolphinemu/emulation/EmulationActivity.java
Source/Android/src/org/dolphinemu/dolphinemu/folderbrowser/FolderBrowser.java
Source/Android/src/org/dolphinemu/dolphinemu/gamelist/GameListActivity.java
Source/Android/src/org/dolphinemu/dolphinemu/settings/video/VideoSettingsFragment.java
2013-11-24 16:12:00 -06:00
f292819ff5
[Android] Due to recent changes in code breaking Tegra 4 support, and also the upcoming code which will be breaking GLES2 support entirely. Taking the initiative to drop the remaining support code from the codebase in preparation for the upcoming changes. For a look at how Dolphin on Tegra 4 looked like prior and would not have been able to be fixed at all due to Tegra 4 not supporting the precision we need in our shaders; Look at this Youtube video http://youtu.be/Ga7Jc_Ote7U
2013-11-24 15:49:23 -06:00
f6f2b1fc60
[Android-overlay] Support multiple gamepads with touch screen controls.
2013-11-24 15:04:53 -06:00
d410fe7c96
OpenGL: cleanup yuv2rgb (real xfb) workflow
...
We neither scale nor render from subimages, so we by using gl_Position, we don't have to generate _any_ vertices for this converting.
Also remove the glTexSubImage optimization as every driver does it when needed. But there are some workflows (eg on APU) where it's better to realloc this texture instead of a second memcpy or stall.
2013-11-24 15:56:50 +01:00
12741f6406
Add comments for anybody attempting accuracy improvements in the future.
2013-11-25 01:30:53 +13:00
b5bd2ba847
OpenGL: Enable filtering for EFB to Real XFB copies.
...
This fixes Real XFB Jaggies in OpenGL on games which use yscaling, such
as most PAL games.
This fixes the last of the "Real XFB Macroblocking" issues for opengl,
see issue #6503
2013-11-25 01:11:42 +13:00
6f73162df4
[ARM] Implement the Acid test in the JIT core. This test is currently broken in JIT64 since it uses cr instead of cr_fast.
2013-11-24 10:51:07 +00:00
e6b35642df
Fix Desktop GLSL versions in the recent changes.
...
Seems OpenGL ES 3 Requires you must have an lod argument, while Desktop
versions require you must not have a lod argument if you are using a
Sampler2DRect (which doesn't do Mipmapping).
2013-11-24 22:48:10 +13:00
531f840720
Fix OpenGL ES 3 in the recent changes. texelFetch doesn't require the lod argument in desktop GLSL versions, but in GLSL ES 3 it is a required argument.
2013-11-24 07:45:42 +00:00
994426b3dc
Opengl: fix real XFB sample positions
...
(0,0) and (1,0) aren't accurate xfb sample positions. This fixes the image shift to the left and some blocking on higher IR.
2013-11-24 05:39:40 +01:00
eef2cddfd7
Opengl: Fix opengl realxfb "macroblocking"/bluring issue.
...
YUYV textures should NEVER be interpolated/filtered in RGB colour space.
Use TexelFetch to always fetch an actual texture sample.
issue 6503
2013-11-24 17:15:11 +13:00
09f4439d0c
VideoCommon: reorder cbufid in orderer. We've used once two times
2013-11-24 04:43:54 +01:00
7d58278b67
Merge branch 'efb2tex_alpha'
2013-11-24 04:02:38 +01:00
2bf7379a7f
D3D: also fix MAX_COPY_BUFFERS
...
the D3D backend caches the colmat buffers. As we've created more different colmats, the maximum of this matrices must also be updated.
2013-11-24 04:00:12 +01:00
0a31255943
Unused arguments removed from XFBSource::Draw
...
Thanks neo.
2013-11-24 11:33:43 +13:00
43d1678fb2
Dynamically allocate color textures.
...
Saves ram when the video software backend isn't being used.
2013-11-24 00:52:17 +13:00
afe47ff847
Increase res of color texture to match PAL Super Smash Bros: Brawl
...
The pal version of SSBB has a 640x568 xfb, which is larger than the efb.
Increase the size of the static textures and put in some runtime checks
to prevent buffer overruns.
2013-11-24 00:15:08 +13:00
e720ea7837
Remove c++11 feature so VC2010 can be happy.
2013-11-23 23:44:05 +13:00
786e49ed48
Merge branch 'master' into videosoftware-xfb
...
Conflicts:
Source/Core/VideoBackends/Software/Src/EfbCopy.cpp
Source/Core/VideoBackends/Software/Src/SWRenderer.cpp
Source/Core/VideoBackends/Software/Src/SWRenderer.h
Source/Core/VideoBackends/Software/Src/SWVideoConfig.cpp
Source/Core/VideoBackends/Software/Src/SWmain.cpp
2013-11-23 23:20:45 +13:00
999e085411
Fix a few typos.
2013-11-23 20:16:30 +13:00
01da9c4b71
Added a Bypass XFB option to Videosoftware's configuration.
...
This is useful for testing XFB vs no XFB in videosoftware, for
compatablity or visual comparasions.
2013-11-23 20:04:37 +13:00
a94940edd3
Videosoftware realxfb: Fixed a few bugs while testing Zelda: Collectors Edition
...
* Don't force a frame to be progressive if it's already progressive.
* Don't assume the framebuffer will be 640 pixels wide
* Remember to offset the Luma channel by 16.
2013-11-23 18:38:15 +13:00
672fa65ee7
OpenGL: Enable pinned memory even for index buffers (works for me). Big-ish speedup on AMD GPUs for streaming intensive games.
2013-11-22 18:09:52 +01:00
efeb0096c9
Changed the DSP ROM warning from a panic alert to an on-screen message.
2013-11-22 14:55:25 +11:00
b0a83c9aaa
VideoCommon: don't read alpha from efb which don't have alpha
...
This fixes issue 6788
2013-11-22 04:50:33 +01:00
ea9ac07ec9
Merge branch 'master' into jit_exit_addresses
2013-11-21 21:17:58 -06:00
ff91789773
Jit64: really fix fmrx regression
...
This is more tricky than I thought!
2013-11-21 05:31:55 +01:00
011fe86d01
jit64: add regcache option IsBound
...
Lots of x86 instructions are different on memory vs registers.
So to generate code, we often have to check if a ppc register is already bound to a x86 register.
2013-11-21 05:16:58 +01:00
286b6110f1
Revert "Handle BP mask register better to avoid useless BP writes (causing flushes)"
...
This reverts commit 954be9e2d9
2013-11-20 22:53:10 +01:00
bcefa880e4
Jit64: fix fmrx regression
...
Revision ddaf29e039#6825 ). Since fmrx/MOVSD only modifies ps0 but we save
both ps0 and ps1 in one xmm register, not loading the previous value
when binding to a x64 register trashed ps1.
But hey, a good opportunity to shave off one more instruction ;)
2013-11-20 21:30:49 +01:00
42f8562e5c
[Android] Basic Wiimote binding settings now implemented.
2013-11-19 19:28:10 -05:00
7e544d8996
[Android] Basic UI functionality for enabling/disabling aforementioned Gamecube controllers.
2013-11-19 16:14:40 -05:00
53ab104d5f
[Android] Expand the input binding UI in the settings to handle 4 Gamecube controllers in the future.
...
Other changes:
- Broke out MotionAlertDialog into it's own separate class.
- Made a preference specifically for handling input bindings.
2013-11-19 15:53:30 -05:00
ae11fba069
[Android] Make joysticks less dumb from a configuration standpoint.
2013-11-18 14:48:08 -06:00
4f13f6ecaa
"warning fixes" commit introduced warnings; fix them. (And I refuse to use PRI macros.)
2013-11-18 14:34:21 -05:00
b863e40677
Merge branch 'ppc_fp'
2013-11-18 19:31:09 +01:00
e805bf6068
Only add real HID devices to HID list.
2013-11-17 21:14:22 +13:00
b372f97675
Imagewrite.cpp had same problem.
...
I hate windows :(
2013-11-17 11:30:05 +13:00
f4a1f183b9
std::string can't be passed to ... format.
2013-11-17 11:28:11 +13:00
ea3990a41b
Don't pass char* to std::string.
...
Windows was fine with this :(
2013-11-17 11:25:12 +13:00
33d8166620
Use IOFile for TextureToPng to support non-ascii
...
Changed save texture/screenshot uses to std::string
Removed unneeded new/delete calls when dealing with temp data.
2013-11-17 11:14:38 +13:00
cce869ae01
[Core] Fix a mismatched dealloc in Render.cpp in the OGL backend. Should be delete[]
2013-11-16 17:05:51 -05:00
c46aabc853
Merge branch 'master' of https://code.google.com/p/dolphin-emu
2013-11-16 16:53:22 -05:00
4a9c8e6f55
Change software rasterizer screenshot code due to change in api just now.
2013-11-16 15:37:40 -06:00
71d70d896f
Api was too confusing for people.
2013-11-17 10:34:34 +13:00
ee32c8b4e9
[Android] Remove accidental fragment tag in GameListActivity (it was useless, since it's an empty string)
2013-11-16 15:17:37 -05:00
2025f00f88
Woops, vim copy and paste issue with a double include.
2013-11-16 09:41:01 -06:00
11a156615f
[Android] Like the previous commit (but for the GameListFragment), don't constantly create a new adapter when filling the game list.
2013-11-16 05:30:58 -05:00
d98664b053
[Android] Simplify the FolderBrowserAdapter a little, as well as the Fill method within FolderBrowser.java. Previously the fill method would create an entire new adapter and assign it to the backing ListView. This is pretty unnecessary, so what it now does is, when the function is called, it clears out the adapter, then simply fills it in again with the new directory's contents. Simple, and doesn't require a reference to the actual ListView to be used.
2013-11-16 04:36:22 -05:00
c8ddc70c97
[Android] Simplify the AboutFragment view inflating. Considering the backing layout is a direct ListView, the original rootView can just be casted to a ListView, no need for an intermediate.
2013-11-16 04:09:30 -05:00
94f8c68a35
[Android] Use the ViewHolder design pattern for the FolderBrowserAdapter. In directories with a lot of files, this should be noticeably smoother in terms of scrolling. Also fixed the case where the subtitle text might disappear.
2013-11-16 03:56:58 -05:00
c90ce1aad1
[Android] Change the name of the XML layout file gamelist_folderbrowser_list.xml to gamelist_folderbrowser_list_item.xml. More accurate name on what it is.
2013-11-16 03:31:02 -05:00
21a196f9af
[Android] Eliminate the need to hold a reference to the shown Fragment within GameListActivity. Now we only care about the numeric ID of the one being shown.
2013-11-16 03:09:07 -05:00
777b5a109b
[Android] Fix the handling of orientation changes for the Fragments related to the game list. Now screen orientation changes don't kick you back to the root view.
2013-11-16 01:48:17 -05:00
e8a4cc0f71
Screenshot capability of Software rasterizer for feature completness.
2013-11-15 22:08:08 -06:00
23c84c220f
[Android] Add ability to take screenshots into the emulation menu.
2013-11-15 22:21:50 -05:00
3a13dfdd9b
[OGL] Textures now save to PNG not TGA
2013-11-16 15:59:59 +13:00
15bb974224
[Android] Add screenshot nativelibrary function.
2013-11-15 17:32:50 -06:00
0720026dab
[Android] Disable the workaround for Qualcomm devices with driver >= 53 for the rotated framebuffer since it is fixed now.
2013-11-15 16:56:21 -06:00
b9d7bb9012
[Android] Broken UBOs has been fixed in Adreno driver v53, so update the comment in DriverDetails.h. Also enable dynamic UBO array member access with that version since there is a high chance of it being fixed. Dynamic UBO member access is commonly noticed with character models being terrible looking.
2013-11-15 16:51:07 -06:00
483a28f34a
[Android] Simplify the AboutFragmentAdapter a little bit.
...
- Removes an unnecessary variable.
- Shortens the LayoutInflater usage.
- Gets rid of an unnecessary override of onAttach.
2013-11-15 17:19:09 -05:00
8c7d1afd5f
[Android] Externalize the device compatibility warning strings.
2013-11-15 17:05:56 -05:00
4bb22aa0ab
[Android] Indicate whether or not the device supports NEON within the About fragment.
2013-11-15 16:48:36 -05:00
d3731d0827
[Android] Get rid of some unnecessary variables in the getView() methods of some adapters.
...
Directly referencing convertView is fine.
2013-11-15 16:32:52 -05:00
0e415467c4
[Android] Spawn a message if someone's phone doesn't support NEON. NEON is a requirement for Dolphin Mobile on ARM, CPU core will crash without it.
2013-11-15 14:17:47 -06:00
07765aa6f0
[Android] Documentation and some cleanup.
2013-11-15 12:26:17 -05:00
c712fb7356
Fix introduced ImageWrite warning.
2013-11-15 17:58:57 +13:00
714633f311
Fixed console commands not registering. Code cleanup.
2013-11-14 22:23:55 -05:00
117bf435b0
Fix GUI-less build. Also potentially OS X. We now require libpng due to our screenshot code relying on it now. WXWidgets links in libpng by itself so it isn't noticed in a wxwidgets build. OS X seems to not have libpng linked in from wxWidgets so just link in libpng at all times.
2013-11-15 01:09:38 +00:00
ba71cdcc51
Goto crosses initialization error.
...
Sorry.
2013-11-15 13:05:03 +13:00
033ed9477e
Reworked Screenshot saving.
...
Now OGL doesn't rely on WX for PNG saving.
FlipImageData supports (pixel data len > 3) now.
TextureToPng is now in ImageWrite.cpp/h
Video Common depends on zlib and png.
D3D no longer depends on zlib and png.
2013-11-15 13:00:38 +13:00
1e90a838f2
Make sure to add our resources for the joystick.
2013-11-14 15:20:44 -06:00
feedee5c23
[Android-overlay] Support touch screen axises in native. Have a non-configurable main joystick on screen at this point.
2013-11-14 15:18:33 -06:00
9d3d568ae4
[Android] Bump the targetSdkVersion in the AndroidManifest XML file to 19 (KitKat). Nothing we do would require compatibility behaviors to be enabled to maintain forward compatibility.
2013-11-14 11:01:44 -05:00
f15a0c17d0
[Android] Get rid of some unnecessary onAttach overrides in AboutFragment, VideoSettingsFragment, and FolderBrowser. These can just be replaced with calls to getActivity().
2013-11-14 10:45:45 -05:00
2703cae8d3
Fixed ZComploc and Zfreeze values being incorrectly saved.
2013-11-14 03:15:03 -05:00
0fced651a5
More warning fixes, OSX build fix.
2013-11-14 03:11:40 -05:00
7e9b970240
Use libpng for saving images.
...
TODO: Needs threading done similiar to OGL backend.
Fixes issue 6779.
2013-11-14 21:02:49 +13:00
c3069eda28
build fix
2013-11-14 02:27:53 -05:00
39a4d4329d
more warning fixes
2013-11-14 02:19:15 -05:00
ca5b3b4773
atlbase not needed. Interim fix until I get png done.
2013-11-14 18:10:39 +13:00
1942d79c5b
[Android-overlay] Had the action reversed.
2013-11-13 16:36:30 -06:00
2a23bdde6f
Merge branch 'master' into android-new-control-input-overlay
...
Conflicts:
Source/Core/DolphinWX/Src/Android/ButtonManager.h
2013-11-13 16:17:42 -06:00
63a9dff3bb
Windows requires memory to be included to use unique_ptr
2013-11-13 12:51:49 -06:00
652ef24a2e
Remove our two instances of auto_ptr and replace it with unique_ptr. auto_ptr has been deprecated.
2013-11-13 11:44:04 -06:00
7b53574b68
Support texture and screenshot dumping using WIC, no XP support.
2013-11-14 00:48:02 +13:00
abc3bddb54
Revert "D3D: Reintroduce depencency on D3DX11 because it's the most straightforward way to bring back some broken features."
...
This reverts commit a83c239765
2013-11-14 00:34:09 +13:00
f96e9e1ae4
warnings and code formatting
2013-11-13 04:03:46 -05:00
038ffea369
Jit64: don't flush clean FPRs
2013-11-13 08:03:18 +01:00
288bef2807
x64: add small warning if CPU has SSE2 but not DAZ
2013-11-13 06:26:57 +01:00
d78c8c21a2
jit64: enable fp instructions faddx fsubx fdivx fdivsx
...
all of them are now accurate enough as we handle non-ieee floats correctly
2013-11-13 06:26:50 +01:00
cd069fdce1
Interpreter: software-based flush-to-zero
...
bDAZ is now called bFlushToZero to better reflect what it's actually
used for.
I decided not to support any hardware-based flush-to-zero on systems
that don't support this for both inputs _and_ outputs. It makes the code
cleaner and the intersection of CPUs that support SSE2 but not DAZ
should be very small.
2013-11-13 06:24:58 +01:00
466a7afde3
Interpreter: support non-IEEE mode emulation
...
v2: fix fxsave on visual studio, thx @ rodolfo for this patch
2013-11-13 06:24:57 +01:00
710a0ff435
Jit64: don't unnecessarily load registers
2013-11-13 06:16:24 +01:00
ddaf29e039
Jit64: use AVX instructions in some places
2013-11-13 06:15:56 +01:00
ae86850a78
x64: support VEX opcode encoding
...
and add some AVX instructions
2013-11-13 06:12:23 +01:00
22b47d5b9c
Jit64: Fix and re-enable psq_l for W=1
...
Patch by konpie:
https://forums.dolphin-emu.org/Thread-code-bug-report-based-on-3-0-735
2013-11-13 05:58:28 +01:00
6054129df8
x64: detect FMA support
2013-11-13 04:46:34 +01:00
2fecb033be
Jit64: micro-optimize ps_sel
...
Adapted from a patch by konpie:
https://forums.dolphin-emu.org/Thread-code-bug-report-based-on-3-0-735
2013-11-13 04:45:43 +01:00
6f5650f82e
Fix Bluetooth warnings
2013-11-13 04:01:24 +01:00
268bdf19ce
Fix format string warnings
2013-11-13 04:01:16 +01:00
39ad5a2f7a
Disable Fastmem on JIT64IL. JIT64IL is completely incompatible with Fastmem and doesn't need it since it has its own way to speed up memory accesses. This fixes the JIT64IL core, which I totally didn't break but was blamed for.
2013-11-12 19:37:09 -06:00
7c1ac441f6
Redo 'Fixes GCC 4.9 compilation. It now supplies its own _mm_shuffle_epi8 intrinsic.' This time with support for Windows.
2013-11-12 16:34:56 -06:00
0f94652952
Disable wiimote source selection while netplay is running.
2013-11-12 04:16:51 -05:00
a72b3ca20c
[ARM] Don't leave my test code in the JIT core.
2013-11-12 04:22:42 +00:00
56557c845a
[ARM] Fix NEON emitter encodings.
2013-11-12 01:01:54 +00:00
68ba0f7f4e
Add a comment to the magic value reading location.
2013-11-11 17:17:49 +00:00
22fef0da9b
Fixed a bug that incorrectly recognized as 'GameCube'. when you open the Korean Wii Disc, which is re-encrypted with a common-key(g_MasterKey).
2013-11-12 01:05:30 +09:00
d1de336879
[ARM] More NEON emitters.
2013-11-11 01:47:05 +00:00
3a28afd8d5
Changed thread barrier and event to use a lamba wait predicate instead of a functor.
2013-11-10 04:57:11 -05:00
e013a74cdb
[ARM] More NEON emitters.
2013-11-10 05:02:32 +00:00
22f727cc69
D3D: Use D3DX11 for taking screenshots.
2013-11-10 00:22:35 +01:00
0b02880b76
Revert "Be less dumb."
...
Revert "Actually, filename really does need to be a parameter because of some random debug thing."
Revert "fix non-HAVE_WX case"
Revert "Handle screenshot saving in RenderBase. Removes dependency on D3DX11 for screenshots (texture dumping is still broken)."
This reverts commits 00fe5057f174b5fb3ab4cd46138d295f72542e06
2013-11-10 00:22:33 +01:00
3de2ee5d46
D3D: Use D3DX for texture dumping.
2013-11-10 00:22:31 +01:00
a83c239765
D3D: Reintroduce depencency on D3DX11 because it's the most straightforward way to bring back some broken features.
...
The Dolphin development team is incapable of providing sufficient replacement for its previous usage in Dolphin and the advantages of dropping the dependency do not justify the removal of screenshots and texture dumping.
From now on, d3dx11.h, d3dx11async.h, d3dx11core.h and d3dx11tex.h are required to be stored somewhere in the header include path. I don't know if this is the case for anyone else than me, but I can't really say that I care after having people randomly merge unfinished branches into master.
2013-11-10 00:18:03 +01:00
8923968b47
Revert "VideoCommon: create native texture pool"
...
This reverts commit 6cece6b486
2013-11-07 21:16:36 +01:00
33d56f50a4
Re-plumb window handle to the dsound backend.
...
Reverts parts of commit 71c01d83ab614b9e0c421d03ca694713dbabff48.
Fixes issue 6800
2013-11-07 09:24:56 -08:00
ea2d8bf328
VideoCommon: fix custom textures
...
This fix a regression by revision 6cece6b486
2013-11-07 15:55:34 +01:00
c33036aa01
Fix the filter for some files in the Core VS project related to the JitIL. They were in the root of the project. They should actually be in their own filter named JitILCommon.
2013-11-07 01:33:32 -05:00
1aa06b8fa4
jit: change our linking module to be able to handle arbitrary exit addresses
...
And also do this for all JIT backends...
2013-11-07 06:19:35 +01:00
ea6fd58b97
Use an unordered_set to track FIFO write adresses
...
Reduces CheckGatherPipe CPU consumption by 40%.
2013-11-07 03:22:32 +01:00
954be9e2d9
Handle BP mask register better to avoid useless BP writes (causing flushes)
...
Patch from konpie: http://forums.dolphin-emulator.com/showthread.php?tid=24658
2013-11-07 03:06:53 +01:00
cdc27e46f1
Jit64: implement ps_res
...
This is probably more accurate than it is allowed to be. After all, the
instructions are supposed to be "estimates".
2013-11-07 02:19:20 +01:00
0a2a273a2e
Jit64: simplify ps_sel
2013-11-07 02:02:38 +01:00
201c4c65a5
Jit64: fix typo in ps_sel and re-enable it
2013-11-07 02:02:24 +01:00
2f7ca688ae
jit64: remove dead code
2013-11-07 01:59:10 +01:00
c29fb22cd4
Jit64: extract frsqrtex as method
2013-11-07 01:59:00 +01:00
897bec1add
[JitIL] No more terrible usage of vectors.
...
This is possible because of C++11.
2013-11-06 22:18:08 +13:00
274f6dd7ab
ogl: check default framebuffer for msaa
...
default framebuffer must not be sampled, so throw a panicalert if it is
2013-11-05 17:38:48 +01:00
948ace9546
[ARM] Minor idle skip optimization in bx.
2013-11-05 13:05:39 +00:00
56685c396a
[ARM] Fix an issue with the data offset in LoadStore operations. Thanks to PPSSPP.
2013-11-05 13:05:38 +00:00
6cece6b486
VideoCommon: create native texture pool
...
We often need the same native texture objects for new textures. This commit
try to avoid destroying and creation of this textures by pooling them.
This should be a big performance gain for some efb2ram games as they may
overwrites partially a cached texture (which would be deleted) and afterwards
try to read it.
Creating/destroying sounds like an easy task, but it isn't. eg the nvidia ogl
driver synchonize their threads do avoid use-after-free issues.
2013-11-05 12:21:22 +01:00
f4056978c8
[windows] update SDL-2.0.0 to 2.0.1. Fixes issue 6793.
2013-11-04 23:50:52 -08:00
045efdfc3e
ogl: drop all %f from TextureConversionShader
2013-11-04 12:38:55 +01:00
e15f628935
Fix {Read,Write}FileToString.
...
We should be using binary always.
2013-11-05 00:33:41 +13:00
3f1ea21e4f
Fix warnings.
2013-11-03 20:54:06 -05:00
21610c2e54
Run code through clang-modernize -add-override to add 'override' decls.
2013-11-03 20:54:05 -05:00
c579637eaf
Run code through the advanced tool 'sed' to remove trailing whitespace.
2013-11-03 20:54:05 -05:00
965b32be9c
Run code through clang-modernize -loop-convert to create range-based for loops, and manually fix some stuff up.
2013-11-03 20:54:01 -05:00
00fe5057f1
Be less dumb.
2013-11-03 14:37:56 -05:00
a250ab0af7
Stop saving random files to ./
2013-11-02 23:47:10 -04:00
74b5fb3ab4
Actually, filename really does need to be a parameter because of some random debug thing.
2013-11-02 22:44:27 -04:00
cd46138d29
fix non-HAVE_WX case
2013-11-02 22:23:29 -04:00
5f72542e06
Handle screenshot saving in RenderBase. Removes dependency on D3DX11 for screenshots (texture dumping is still broken).
2013-11-02 22:19:21 -04:00
26059f1109
rename the dolphinwx project to dolphin, and thus change the executable name back to dolphin{d}.exe
2013-11-02 16:22:15 -07:00
bc45a38122
do not copy pdbs to binary dir (you can use the symbol server for $(random_build), or it will be found locally if you built it yourself)
2013-11-02 16:19:17 -07:00
dab9af43a4
[Windows] Add missing dlls and enable OpenMP support.
2013-11-03 11:54:45 +13:00
e22ff4927a
Revert "Add dxsdk_dir to vc++ paths via base.props. This means you no longer need the paths in a global property sheet. In fact if you have them in such a file, you should remove them as it will cause conflicts with the vs2013 build."
...
This reverts commit 0791a9ef80
2013-11-02 09:24:56 +13:00
65404e7475
Removed duplicate definition of ibuild within JitIL.h. Fixes JitIL from hanging on x64/x86.
2013-11-01 12:33:29 +11:00
82729fcc8f
Merge remote-tracking branch 'shuffle2/vc12'
...
Conflicts:
Source/Core/Common/Common.vcxproj
Source/Core/Common/Common.vcxproj.filters
2013-10-31 16:51:56 -04:00
4c7bbd96e4
Improve ChunkFile.h:
...
- Add support for std::set and std:pair.
- Switch from std::is_pod to std::is_trivially_copyable, to allow for
types that have constructors but trivial copy constructors. Easy,
except there are three different nonstandard versions of it required
on different platforms, in addition to the standard one.
2013-10-31 15:40:53 -04:00
0f061e4e7c
[Android] Do /not/ give users the benefit of the doubt that the device supports OpenGL ES 3 when we can't grab an OpenGL context. The only devices that fail to do so is PowerVR5 and we can't run with them anyway.
2013-10-31 07:30:18 -05:00
498d491942
Merge branch 'viewportCorrection'
2013-10-29 22:33:51 +01:00
35824aa4d5
ogl: ceil viewport, rounding isn't supported on vs and this is more like the old behavior
2013-10-29 21:42:40 +01:00
ab35503195
ogl: don't force depth+stencil for default framebuffer
2013-10-29 19:20:40 +01:00
92fdac412b
VideoCommon: drop UpdateViewportWithCorrection
...
It's only used once in BPFunction which itself is also only used once.
So the setter is moved to BPStructs like all other ones.
2013-10-29 18:55:50 +01:00
2118c1d3c3
VideoCommon: remove constants.depthparams[2+3] as they aren't used in the shader at all
2013-10-29 18:55:50 +01:00
f4a9deefa8
ogl: remove some unneeded includes
2013-10-29 18:55:50 +01:00
8e0f91f70e
d3d: use backend based UpdateViewport instead of VideoCommon one
2013-10-29 18:55:50 +01:00
acc0b3b21c
ogl: don't call SetViewportChanged from backend as it's not needed any more
2013-10-29 18:55:50 +01:00
3151d8709c
VideoCommon: move ViewportCorrection into VideoCommon
...
D3D doesn't allow bigger viewports than rendertargets. But flipper does, so the viewport will be clipped and the transformation matrix will be changed.
This was done in the D3D backend itself. This is now moved into VideoCommon. This don't reduce code, but in this way, VideoCommon doesn't depend on the backends.
2013-10-29 18:55:50 +01:00
0002236e3e
Merge branch 'viewport_float'
2013-10-29 18:33:56 +01:00
b253d60f04
VideoCommon: Drop D3D9 SSAA implementation
...
This isn't needed for both OGL+D3D11 as they support sample shading directly. So we
could use the common MSAA util shaders instead of writing custom ones.
2013-10-29 18:20:07 +01:00
f18c461fd6
[viewport-float] Fix OpenGL ES 3 build.
2013-10-29 17:10:02 +00:00
edf0511d4e
OGL: Use floating points for viewport parameters.
...
As told by neobain, ARB_viewport_array introduced float viewports.
They must be supported on OGL4.1+, but it's usually also implemented on 3.3 GPUs.
2013-10-29 15:29:06 +01:00
58d42f43e3
[Android] Fix PCH build. Clean up DolphinWX cmake file a little bit. Modify our android cmake toolchain file to make the default build location not be source root, because that is stupid.
2013-10-28 19:59:03 -05:00
3c7613fc83
[Android] More cleanup. We don't need the preference to enable/disable the overlay in the video preferences anymore.
2013-10-28 16:36:26 -04:00
4e999fe0ee
[Android] General cleanup.
...
We no longer need the buttons in Assets, considering they are now resources (ie. drawables).
Also remove (now) junk code from VideoSettingsFragment.java. We handle the input overlay within the InputSettingsFragment.
Also add a TODO detailing what needs to be refactored when axis support is finally added.
2013-10-27 22:15:49 -04:00
d1834b3058
[Android] Overlay now works during emulation.
2013-10-27 22:08:41 -04:00
2e983071c5
Add git.bat to the options in make_scmrev.h.js because depot_tools uses it and I'm silly.
2013-10-27 19:51:55 -04:00
b97e2faa15
Fix Linux build issue.
2013-10-27 19:51:55 -04:00
8e73e8ae5f
Wipe all traces of OpenSSL's AES implementation. Use polarssl instead.
2013-10-27 18:27:07 +00:00
0791a9ef80
Add dxsdk_dir to vc++ paths via base.props. This means you no longer need the paths in a global property sheet. In fact if you have them in such a file, you should remove them as it will cause conflicts with the vs2013 build.
2013-10-27 00:48:53 -07:00
8dcd13cca7
[vc12] std::min/max requires <algorithm> header. It should be in pch, but just add it for the single file that needs it, for now.
2013-10-26 18:04:00 -07:00
ccd30024b3
Update to VS2013 and a slew of build-related updates. Notes:
...
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
2013-10-26 17:55:38 -07:00
1eba4da21a
Revert "Fixes GCC 4.9 compilation. It now supplies its own _mm_shuffle_epi8 intrinsic."
...
This reverts commit b2c4901b3f
2013-10-26 19:21:00 -05:00
b2c4901b3f
Fixes GCC 4.9 compilation. It now supplies its own _mm_shuffle_epi8 intrinsic.
2013-10-26 19:05:31 -05:00
f82e1b9dc7
D3D: Use floating points for viewport parameters.
...
OpenGL 4.1 allows for a similar change thanks to ARB_viewport_array, but we don't make use of this, yet.
2013-10-26 12:40:37 +02:00
c24dfe559b
[Android] Change how the onTouchEvent native method works. Just pass in the correct Button ID and Action and it'll be pressed or not. Not actually rigged up to the Java code yet. Doesn't support anything with an Axis yet so no C stick, main stick, L and R triggers
2013-10-26 05:36:20 -05:00
c3e4aa1f35
[Android] Add the copyright header to some Java source files that were lacking them.
2013-10-26 01:06:00 -04:00
c78d5a9751
[Android] Improve an if statement check in InputConfigFragment.java. Also clarify it.
2013-10-26 00:59:53 -04:00
8d71a83ae5
[Android] Fix the super-mature string that was a placeholder for the title for the overlay configuration setting.
...
Also fix a NullPointerException possibility. Fixed it by giving the PreferenceScreen a title.
2013-10-26 00:55:07 -04:00
41f6f6adc9
Added memchecks when the MMU is enabled. Thanks to comex for the fix.
...
Fixes issue 6754.
2013-10-26 14:32:03 +11:00
77eb9ce725
[Android] Add the capability to dynamically enable and disable the input overlay during emulation.
2013-10-25 23:10:17 -04:00
d9be95ed9e
[Android] Fix alignment issues with the overlay config settings.
2013-10-25 21:29:06 -04:00
7c6caa388a
[Android] Prevent automatic alignments within the overlay configuration settings. Let the user do this on their own.
2013-10-25 21:14:11 -04:00
c1ed54832c
[Android] Maintain the chosen button layout when returning to the input overlay configuration menu.
...
- Also make the overlay configuration screen fullscreen for the app.
- Also force the overlay activity to be landscape, since this is the only orientation the EmulationActivity supports.
2013-10-25 21:05:42 -04:00
c8cf71c913
[Android] The emulation overlay now sets the button positions based upon the locations chosen in the input overlay configuration settings. Documented the hell out of how the initialization of the Drawables works inside InputOverlay.java.
...
Also made the use of InputOverlayItem.java obsolete. So this is now removed.
2013-10-25 20:34:38 -04:00
88c797a9c0
[Android] Slight cleanup for previous commit. Mostly UI adjustments.
...
Makes the buttons appear uniformly on the overlay config activity.
2013-10-25 17:39:23 -04:00
9f36081a8f
[Android] Implement a very basic version of the input overlay configuration screen.
...
Still a bit of a mess, but this will get cleaned up during finalizations.
2013-10-25 16:52:46 -04:00
005af7bd63
Fix build on Mavericks.
2013-10-24 16:39:46 -04:00
1267877e80
[Android] Documentation typo cleanups from the last commit.
...
Also cleaned up the Javadoc for the constructor of MotionAlertDialog.
2013-10-24 15:10:25 -04:00
079147ca07
[Android] Refactor InputConfigFragment a little bit in preparation for the implementation of the new input overlay.
...
This moves all of the dialog handling into the actual MotionAlertDialog class itself. This is something I should have done a long time ago.
Also moved the Gamecube input binding preferences into their own PreferenceScreen.
2013-10-24 14:55:10 -04:00
69a10869bb
Document FPSCR fields
2013-10-24 01:46:07 +02:00
8aef60f6ca
Allow frame limit to be set via game ini.
2013-10-23 13:45:03 -04:00
187827624f
[Android] 0.12 release.
2013-10-21 12:09:15 -05:00
e3febb1603
[Android] Fix MIPS compiling.
2013-10-21 09:52:43 -05:00
887f8e463d
[Android] Fix MIPS compiling.
2013-10-21 09:43:19 -05:00
aa713e11f7
[Android] Fix Build.
2013-10-21 09:36:40 -05:00
4b774ef99a
Fix my fix.
2013-10-20 16:42:30 -04:00
448c19bce1
Fix an issue where my recent changes would cause compilation to fail on some distros of Linux.
...
Note that before pushing those changes, they were initially tested in a branch, and passed the compilation testing. Sorry that I didn't catch this before.
2013-10-20 16:32:40 -04:00
b3da5c5d58
Really fix the Linux build this time.
...
Dammit size_t :(
2013-10-19 19:59:05 -04:00
a5a21e7f44
Fix Linux build.
...
Turns out Hash.h needs Common.h
2013-10-19 19:59:04 -04:00
8b10d5b481
Add header cstdint to CommonTypes.h
2013-10-19 19:59:03 -04:00
1f0710caf7
Remove some more includes.
2013-10-19 19:59:03 -04:00
207547b425
Clean up includes in DiscIO as much as possible.
...
Also turned a long iterator declaration in VolumeDirectory.cpp to using auto in order to shorten it.
2013-10-19 19:59:02 -04:00
82fd579506
Remove unnecessary include of "../../Core/Src/ConfigManager.h" from BannerLoaderGC.cpp. In actuality, all that was needed here was an include of CommonTypes.h.
...
Also change Common.h to CommonTypes in BannerLoaderWii.cpp.
2013-10-19 19:59:01 -04:00
6adf3e37e2
Clean out unnecessary includes from the DSP JIT.
2013-10-19 19:59:00 -04:00
af1b5fe767
Woops forgot to clean out some files in the Jit64IL. All clean now.
2013-10-19 19:58:59 -04:00
80b4cb6cf3
Clean out includes from regular JitCommon.
2013-10-19 19:58:59 -04:00
3360ec013f
Clean out includes in JitILCommon.
2013-10-19 19:58:58 -04:00
22cdc0f56e
Remove some more unnecessary includes, as well as organize a little more.
2013-10-19 19:58:57 -04:00
97cd42f5c3
Remove some unnecessary includes as well as simplifying exisiting ones if possible.
2013-10-19 19:58:56 -04:00
33ee04626d
Don't define __rdtsc if x86intrin.h already does.
2013-10-19 12:40:21 -04:00
81964517d6
Remove a redundant assignment in Init() within PowerPC.cpp. We already assign zero to ppcState.dtlb_last.
2013-10-17 20:38:49 -04:00
b8a947ce0a
Fix a filter in the VS project file for JitILCommon-related files.
2013-10-17 06:36:32 -04:00
de1773affb
Basic precompiled header support for Linux/OS X. Shaves 20-30% off full rebuild time on my system.
2013-10-17 00:07:35 -04:00
cffe6ba3fd
Fix TextureEncoder.h
2013-10-16 23:20:51 -04:00
e1f3a4d7b3
Fix out-of-tree build on OS X.
2013-10-16 23:15:21 -04:00
e4a81f32d4
Document some UGeckoInstruction fields
2013-10-17 04:59:13 +02:00
f605ea9eeb
[Netplay] Allow a spectator to leave without affecting players.
2013-10-16 21:44:49 -04:00
5a212a8fe0
jit64: enable faddsx again
...
It was disabled because of issue 182, but as this game depeneds on FPRF, it was just 'fixed' because of the fallback to interpreter (which implements FPRF by default).
Also enables FPRF for this game via GameIni, so that the issue is still workaround.
If there are any regressions because of this commit, please try to enable FPRF in GameIni.
2013-10-17 01:43:16 +02:00
f850d283d1
ogl: only use bufferdata if buffersubdata is broken
...
Else nvidia fallback would be slower than needed
2013-10-16 15:46:58 +02:00
f0bf5aa113
Fix rendering on Adreno and Mali. This adds a new DriverDetails bug to know if the bufferstreaming is broken. Thanks degasus for fixing this.
2013-10-16 11:27:58 +00:00
c234dc97c0
Jit64: optimize floating-point/paired-single arith
...
The "else if (b != d)" branch was dead code and only works if b == d. Now
the last else block with two temporary XMM registers is not needed anymore.
2013-10-16 00:52:21 +02:00
b4513313bb
Increase the trampoline cache size to cater for fastmem writes.
...
Fixes issue 6722.
2013-10-16 09:26:08 +11:00
6eb216fc77
(Netplay) Disable record input checkbox while a game is running.
...
Fixes issue 6734.
2013-10-15 17:28:01 -04:00
b11cf1fa10
Fix config file saving on Windows.
2013-10-15 17:20:00 -04:00
b1afb32188
ShaderGen: fix for commit bd80de14f4
2013-10-15 14:48:40 +02:00
bd80de14f4
ShaderGen: drop PerPixelLighting + 8Texcoord hack
...
D3D9 only supports 8 texcoords. But we need a new one for ppl, so we just store it in the first 4 texcoords in the free 4th component.
This isn't needed for both d3d11 and ogl3, so just remove it.
2013-10-15 14:38:26 +02:00
f62579761c
ShaderGen: remove nonsense for() if() {}
2013-10-15 14:31:02 +02:00
72c1e143f3
Try to atomically save config files.
2013-10-15 02:59:25 -04:00
f3af8ee0f0
Revert "Remove some unnecessary includes."
...
Turns out this explodes on Linux.
This reverts commit c4696568cc
2013-10-14 04:05:38 -04:00
c4696568cc
Remove some unnecessary includes.
2013-10-14 04:01:57 -04:00
2015cd0928
[Android] Implement OnSharedPreferenceChangeListener within PrefsActivity.java. This allows us to immediately save to the ini config when a preference in the front-end is changed, rather than waiting for the settings window to close. This also allows us to remove handling for preferences from CPUSettingsFragment.java and VideoSettingsFragment.java.
2013-10-13 22:20:34 -04:00
390760bd75
Perf: Use unordered_map instead of map in very slightly hot function.
...
Incrementing an unordered_map's iterator is a bit faster.
2013-10-13 15:31:42 -04:00
1570558789
Remove unused variable waitingForPEInterruptDisable.
2013-10-13 14:00:38 -04:00
59ae93d04e
PixelShaderGen: Refine the comment from revision 3fbe1b1ccd.
2013-10-13 14:59:59 +00:00
3fbe1b1ccd
VideoCommon: Update FastDepth's comment
2013-10-13 16:14:30 +02:00
6798a4763e
VideoCommon: revert the ViewPort changes
...
xfregs isn't written when calling this function, so we have to use such an invalid flag :-(
2013-10-13 15:41:11 +02:00
2754c1132e
VideoCommon: reimplement Dirty() in PixelShaderManager
...
This isn't needed in VertexShaderManager as it's still in the old dirty flag way.
But it's very importend for PixelShaderManager as some float4s aren't initialized as 0.0f
2013-10-12 20:31:59 +02:00
50c404ce4a
VideoCommon: fix dstAlpha
2013-10-12 20:31:59 +02:00
0b2fb548c3
VideoCommon: remove SetVSConstant4f
2013-10-12 20:31:59 +02:00
5de7ac4791
OGL: update ubo workaround
2013-10-12 20:31:59 +02:00
cc6c454898
VideoCommon: refactor PixelShaderManager setters
...
The old way was to use a dirty flag per setter. Now we just update the const buffer per setter directly.
The old optimization isn't needed any more as the setters don't call the backend any more.
The follow parts are rewritten:
Alpha
ZTextureType
zbias
FogParam
FogColor
Color
TexDim
IndMatrix
MaterialColor
FogRangeAdjust
Lights
2013-10-12 20:31:25 +02:00
15ed0ea9cf
videoCommon: remove not supported constant types
...
I'm pretty sure GPUs can read u8 values, but this isn't exported by the API.
But hey, see unpackSnorm4x8 :-)
2013-10-12 20:29:56 +02:00
6e2fe72b8f
D3D: also uses VideoCommon constant buffer handling
...
As now both backends uses the VideoCommon one, the old setting API was removed.
2013-10-12 20:29:56 +02:00
7c14463d11
ogl: implement useful constant buffer upload
...
this will remove the additional memcpy introduced in my last commit
2013-10-12 20:29:56 +02:00
4377618438
VideoCommon: keep a copy of the const buffer in VideoCommon
...
The upload in the backend isn't done, it's just pushed by the mostly removed SetMulti*SConstant4fv.
Also no optimizations was done on VideoCommon side, but I can start now :-)
Sorry for the hacky way, but I think this is a nice (working) snapshot for a much bigger change.
2013-10-12 20:29:56 +02:00
0753ce5bda
ogl: use GL_RGBA instead of GL_RGBA8
...
8 bit per pixel is _everywhere_ the default, so we don't need to define it explicitly.
Also we don't rely on exact 8 bit resolution.
2013-10-12 16:34:06 +02:00
2f0aca2055
[ARM] Fix the JITILArm and JITArm dispatchers from comex's recent changes.
2013-10-12 08:30:26 +00:00
0556193442
Build fix for previous commit.
2013-10-11 21:45:44 -05:00
cf7521dc36
[Android] Make Tegra 4 output graphics that aren't visually appealing.
2013-10-11 21:42:07 -05:00
615bac7ebc
[Android] Replace the getter for the adapter backing the GameListFragment with a function that simply clears the array adapter. Maintains encapsulation this way. Simplified the actual setting of the backing ArrayAdapter for GameListFragment; this allows us to make a class variable a method variable now.
...
Also fixed up the Javadoc for the OnGameListZeroListener.
2013-10-10 17:08:46 -04:00
511de71736
[Android] Actually show the currently selected CPU core and video backend within the settings screen.
2013-10-10 11:57:18 -04:00
8b6ff7a358
Revert "{Android] Eliminate need for even using a byte array when copying assets over."
...
Turns out Android devs decided to opt for one of the most retarded ways of handling assets. Assets with some specific extensions are not compressed (png, jpeg, etc), and anything else is compressed. The AssetManager is so revolutionary, that you actually can't retrieve valid FileChannel descriptors from these compressed files! To add to this revolutionary system, they actually didn't give you a straightforward way of disabling this compression. Now using FileChannels are not possible, and thus we must use the much slower way of copying everything over. Thank you Android devs. Godforbid someone would like to use a non-array based way of copying things that's actually efficient, considering DMA access is possible with FileChannels.
This reverts commit 0dd32986b8
2013-10-10 00:11:33 -04:00
78a4dbced8
Remove more unused stuff.
2013-10-09 21:37:29 -04:00
8962b9606b
One shudders to imagine what inhuman thoughts lie behind that code.
...
(Read_Opcode_JIT and Write_Opcode_JIT read/write from unrelated memory
areas.* Rename the latter and refactor.)
*except at the one specific exception handler where it doesn't. I
have no idea what this is supposed to do, but it probably doesn't do
it correctly. For now, remove the exception.
2013-10-09 21:37:29 -04:00
2e32f11f03
Remove "deprecated" and unused function Read_Opcode_JIT_LC.
2013-10-09 21:37:28 -04:00
5847e26d34
Minor JitCache cleanup.
2013-10-09 21:37:28 -04:00
86f2e1734a
Make JIT_UNLIMITED_ICACHE always on.
...
(1) The alternative doesn't compile.
(2) Despite "unlimited" sounding like a hack, it's actually
significantly more correct then the alternative, which is no
emulated icache.
(3) Easier to wrap my head around.
2013-10-09 21:37:28 -04:00
715d5ae8a7
Merge branch 'JitArmIL'
...
This implements a partial JITIL based off of the JIT64IL. It's enough to run most games, albiet at a slow speed.
Implementing instructions for this IL is really simple since it basically is just enabling based on what is already in JIT64IL, and then enabling each individual IL instruction.
2013-10-09 23:16:07 +00:00
7bc4838243
Add the Arm JITIL to DolphinWX.
2013-10-09 23:09:18 +00:00
ba9f2d52e1
Add the JITIL Arm recompiler to the Android settings.
2013-10-09 23:08:12 +00:00
bd79603c66
[ARM-JitArmIL] Enable a bunch of instructions.
2013-10-09 23:03:39 +00:00
f5e1b4659a
[ARM] Clean up LSL, LSR, and ASR emitters, we don't need a separate instruction for each to support registers.
2013-10-09 22:57:31 +00:00
4914665429
[ARM-JITArmIL] Remove the SystemRegisters file.
2013-10-09 20:59:15 +00:00
cc05f66ba1
Don't prepend file:// in wxUtils::Explore() on windows. Wxw will just remove it, and/or blow up trying to remove it, if the path isn't ascii.
...
Fixes issue 6721.
2013-10-09 16:18:33 -04:00
99c89ae109
Fix unicode support for File::Rename() on windows.
...
Partial fix of issue 6721.
2013-10-09 15:33:21 -04:00
d5e40bfb01
Don't waste time looking up the block if enableBlocklink is off anyway.
2013-10-09 15:01:55 -04:00
0dd32986b8
{Android] Eliminate need for even using a byte array when copying assets over.
2013-10-09 12:35:12 -04:00
414ed6ef63
C.K. should fix his website before throwing stones at obsolete xml.
2013-10-09 23:56:16 +13:00
fbcc41c18e
Fix references for OGL, SW and D3D.
2013-10-09 23:49:00 +13:00
935ed814ea
Missed a accept error handler.
...
Init instead of memset.
2013-10-09 23:35:29 +13:00
f811dbb575
Fix accept() bug, which was using the wrong isRW for error conversion.
...
Also fixed a debug issue where local_name is used uninitialised.
2013-10-09 22:16:04 +13:00
932586f743
[JitArmIL] Fix Windows build?
2013-10-09 00:55:43 +00:00
4263f062b0
[JITArmIL] Fix JITIL compiling on x86.
2013-10-08 19:16:27 -05:00
a317391e3d
[Android] Change the names of the functions responsible for loading/saving config values in UserPreferences.java. Makes readability better, since they have names that actually go with each other now. LoadIniToPrefs() and SavePrefsToIni().
2013-10-08 19:08:06 -04:00
efac4bc608
[Android] Rephrase a comment in VideoSettingsFragment.java.
2013-10-08 18:45:10 -04:00
ce5dbfe7a7
[ARM-JITArmIL] Begin merging of the two IL cores in to a common source base.
2013-10-08 19:23:37 +00:00
a0f2183424
[ARM-JITArmIL] Provide the necessary instructions to allow the JitArmIL to actually run. Disable branch instructions as well for now since one is wrong somewhere.
2013-10-08 16:42:33 +00:00
7dd8deecec
[ARM] Update the ArmEmitter with a bunch of NEON emitters. This adds around 47 instruction emitters if I counted correctly. None well tested at this point. On going to add all the NEON emitters.
2013-10-08 10:17:01 +00:00
4a0745799f
Missed OGL includes apparently.
2013-10-08 18:03:33 +13:00
eb480a406c
Fix Windows vcxproj files.
2013-10-08 17:52:18 +13:00
fb4cc76b11
[Android] Remove unnecessary equals comparison in VideoSettingsFragment.java in function SupportsGLES3(). contains() can handle this situation.
2013-10-07 19:50:50 -04:00
0236ba3f86
[ARM-JITARMIL] CMP optimization. Int3 IR. DownCount added.
2013-10-07 23:25:13 +00:00
9920362581
Fix MSVC project files
...
yay relative paths
2013-10-07 18:50:21 -04:00
a7c7208103
Put Plugins/ in Core/, rename to VideoBackends
2013-10-07 10:37:01 -04:00
a4eab75d15
[ARM] Beginning of JitArmIL JIT recompiler. This code is entirely based off of magumagu's work with the JIT64IL. This puts down the base needed for the recompiler. Starfield actually runs quite a few blocks being mysteriously dying while most other games just exit out due to an instruction not being done yet. A lot of this code can be tidied up and actually shared between the two IL recompilers but isn't yet done.
2013-10-07 14:25:07 +00:00
d6f0ecebb4
Fix updating the register even if an exception occurred in MMU mode.
2013-10-07 02:34:38 -04:00
a9908fdf09
Fix build issues on OS X i386.
2013-10-07 02:16:51 -04:00
c054049712
Fix PixelShaderGen from the previous commit.
2013-10-06 21:54:09 -05:00
26c38648ec
[Android] Missed a few things for PowerVR544MP3 'support.' It doesn't actually get any video output on it just like Tegra 4.
2013-10-06 21:51:41 -05:00
a40daac5b1
[Android] Fix an issue where emulation would crash if we couldn't retrieve GPU information. Also if we can't get the graphics information, give them the benefit of the doubt and enable the GLES3 option.
2013-10-06 21:32:05 -05:00
d4bd5fde71
Only emit the texgens if they are used, not every single time do all of them.
2013-10-06 21:32:05 -05:00
cf1b634c33
[Android] Remove unnecessary attributes from the ViewPager layout XML file.
2013-10-06 20:04:53 -04:00
5bee29c7c2
[Android] Reflect the string change in the Tegra 4 support commit with the JP strings as well.
2013-10-06 10:45:05 -04:00
ed88cf6cad
Removing more references to D3D9.
2013-10-06 13:37:10 +02:00
5de6726658
Remove another D3D9 reference.
2013-10-06 13:30:59 +02:00
d198fee21b
Remove more references to D3D9...
2013-10-06 13:30:59 +02:00
61ed40749f
Shader generators: Remove any references to D3D9 and cleanup the affected code.
2013-10-06 13:30:56 +02:00
0e2e71e483
Remove some now unused VideoConfig settings.
2013-10-06 13:28:46 +02:00
755b280c3b
Rename the Direct3D11 backend to Direct3D. The new short name is D3D.
2013-10-06 13:28:45 +02:00
3b188b0481
VideoConfigDiag: Update video backend description to reflect the D3D9 removal.
2013-10-06 13:28:45 +02:00
0d4df39e1f
Remove D3D9 related files.
...
Cf. issue 6167 for a list of shortcomings that made us decide on removing the backend.
2013-10-06 13:28:41 +02:00
6bdcde9dd6
[Android] Tegra 4 'support.' This brings up the OpenGL backend to support Tegra 4 to the point where it will run games but it doesn't have any video output for some reason. This is a large change that doesn't actually change much functionally. Walking through the changes.
...
It changes the string in the Android backend select to just OpenGL ES.
Adds a check in the Android code to check for Tegra 4 and to enable the option to select the OpenGL ES backend.
Adds a DriverDetails bug under BUG_ISTEGRA as a blanket case of Tegra 4 support.
The changes that effects most lines in this change. Removing all float suffixes in the pixel/vertex/util shaders since OpenGL ES 2 doesn't support float suffixes.
Disables the shaders for reinterpreting the EFB format since Tegra 4 doesn't support integers.
Changes GLFunctions.cpp to grab the correct Tegra extension functions.
Readds the GLSL 1.2 'hacks' as GLSLES2 'hacks' since they are required for GLSL ES 2
Adds a GLSLES2 to the GLSL_VERSION enum.
Disable the SamplerCache on Tegra since Tegra doesn't support samplers...
Enable glBufferSubData on Tegra since it is the only mobile GPU to correctly work with it.
Disable glDrawRangeElements on Tegra since it doesn't support it, This uses glDrawElements instead.
2013-10-06 03:12:29 -05:00
2b08172a45
Corrected the XMM0 processing for pairedStoreQuantized in the x86 build.
...
Updated the PC for the fifo writes processing in the less common case.
2013-10-06 16:31:34 +11:00
8722b9cfb5
Missing break for IOCTL_ES_DELETETITLECONTENT
2013-10-06 16:22:44 +13:00
a7d073b0da
[Core] Simplify a loop within function Run() in Interpreter.cpp. The increment variable for the for loop is never used at all, so it's sensible to replace it with a while loop.
2013-10-05 14:38:21 -04:00
2d00c3a4f8
Added code to update the PC before doing a fastmem write. Fixes games with freezing and FIFO errors since r2a339c926e43c11f7b9acc8d3af202f0be54e2b0.
2013-10-05 23:23:49 +10:00
6498a77362
Fix storeSingleFloat stack alignment.
2013-10-05 07:56:57 -04:00
21a114ec28
...Forgot the XMM regs for x86.
2013-10-05 01:17:34 -04:00
144d7e5500
Fix build-breaking typo.
2013-10-05 01:08:08 -04:00
8324510d65
Removed the IOSVersion check (caused some Wii games like Battalion Wars 2 not to boot).
2013-10-05 13:07:40 +10:00
b7d1c03c8a
Added a check for the IOS version before overriding the OSGetResetCode() function.
...
Fixes issue 6700.
2013-10-05 12:41:59 +10:00
f6c0fb7bbe
Merge branch '6663'
...
Should fix some fastmem-related bugs and possibly improve performance a bit.
2013-10-04 21:19:40 -04:00
a51eb5fd19
Fix idle skipping.
...
It incorrectly continued to test EAX after it was changed to load
directly to the assigned register.
Also switch from a flush to ABI_PushRegistersAndAdjustStack, to avoid
needless flushing in the no-idle case.
2013-10-04 20:33:39 -04:00
3679f9ba60
Don't push registers before pairedStoreQuantized, that's dumb.
...
And fix some stuff up. It would probably be good to unify the stack
handling some more rather than having ABI_PushRegistersAndAdjustStack do
part of it and ABI_AlignStack the rest, causing unnecessary subtract
instructions on Linux x86 (only).
2013-10-04 15:48:06 -04:00
8c103a8dee
ChooseMemcardPath bugfix: check for a directory separator before converting an absolute path to a relative path.
...
if the exe directory and the save directory had the same prefix, .../dolphin emulator/... and .../dolphin/... the path would previously have been incorrectly changed
2013-10-04 11:31:22 -07:00
a91469ffa5
Fix stfd, which was broken in the fastmem writes commit.
2013-10-03 18:22:35 -04:00
5e4665301b
Finish replacing ThunkManager with ABI_PushRegistersAndAdjustStack.
...
As part of that, change SafeLoadToEAX to SafeLoadToReg, and have JitIL
use that, which should fix fastmem on JitIL.
This should also fix a potential stack corruption issue with x86.
2013-10-03 18:22:35 -04:00
a53dc6f981
Remove profiled re-JIT support in JitIL.
...
It's extremely unsafe, unused (not exposed in the GUI and not present in
any gameconfigs), and mostly obviated by fastmem. Although this type of
thing could theoretically be useful someday for fastmem support with
MMU, it's probably not the best way to do it, the existing
implementation is way too simplistic, and it can always be dug up to
provide support for a new implementation if needed.
Not like it's a big deal to keep it working, but it really seems
pointless.
2013-10-03 18:22:12 -04:00
3b0c0e2500
Trap to the debugger properly after BackPatch failure.
2013-10-03 18:21:29 -04:00
fe3d0c9aa2
[ARM] Disable subfic, it prevents Wind Waker from booting into a save game.
2013-10-03 06:43:16 +00:00
da46da17dc
[Android] Make sure to change the title accordingly when coming back from the folder browser.
2013-10-02 22:55:16 -04:00
8dfc752780
[Android] Simplify LayoutInflater retrieval within GameListAdapter, FolderBrowserAdapter, and SideMenuAdapter.
...
Also added Javadoc to SideMenuAdapter. Gave the context variables a full spelling as well.
2013-10-02 22:42:43 -04:00
4e08a6cc8d
[Android] Simplify a string retrieval in FolderBrowserAdapter.
...
Also remove an unnecessary import from EmulationActivity.java. This should have been removed in the previous commit.
2013-10-02 22:31:17 -04:00
c517b7fe7e
[Android] Simplify call for getting the WindowManager instance within EmulationActivity.
2013-10-02 21:59:09 -04:00
cb3afe8f70
Warning fixes:
...
- Don't use %lu for size_t; they're different on Linux x86.
- has_warned_about_drivers is only used on win32, so only declare it
there to avoid a unused variable warning.
2013-10-02 20:48:37 -04:00
1ec4894bc5
[Common] Abstract out the decode5A3Image and decodeCI8Image functions in BannerLoaderGC, BannerLoaderWii, and GCMemcard into ColorUtil.cpp. Makes for less copied code and remains functionally the same.
2013-10-02 18:18:54 -04:00
b1268bfcd2
[Android] General documentation cleanup and additions. Adjusts the documentation to conform to the multitude of changes that have been made over time.
...
Very minor code changes were made as well (of which were mostly for formatting). Such as adding override annotations to methods from the Comparable interface, so that they are clearly marked as such.
2013-10-02 15:28:02 -04:00
Tillmann Karras
