Moved ControllerInterface to InputCommon. Moved GCPadNew GUI/Config code to a new project, InputPluginCommon. It is used by both GCPadNew and WiimoteNew. I hope that I included everyone's fixes to GCPadNew and ControllerInterface.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5355 8ced0084-cf51-0410-be5f-012b33b47a6e
Also improve the visual appearance in linux. I think I have done so without hurting the appearance in windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5348 8ced0084-cf51-0410-be5f-012b33b47a6e
Enable it by uncommenting the defines in JitBase.h. For breakpoints to work in JIT mode, the block cache must be disabled. The PPC instruction trace, regs, fpu regs, flags, generated x86 binary and generated x86 disasm are logged in the Dynamic Recompiler log.
Fixes issue 1052.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5314 8ced0084-cf51-0410-be5f-012b33b47a6e
And to help test things like that: DSPJitTester (use with caution on x64, most likely fails there; r5250 might be why)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5306 8ced0084-cf51-0410-be5f-012b33b47a6e
enabled nr in jit after getting skid_au's help in writing the inscrease_addr_reg.
ector can you please take a look and see if the loop code makes sense? it seems
no one it really sure how loops suppose to work in jit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5301 8ced0084-cf51-0410-be5f-012b33b47a6e
These codes don't work unless "_M_SSE=0x301", for SSSE3, or "_M_SSE=0x401", for SSE4.1, is defined as a preprocessor definition.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5300 8ced0084-cf51-0410-be5f-012b33b47a6e
Disabled game-specific Wii/Progressive Scan checkbox, since its never used by Dolphin; it would cause side-effects to global configuration if we did write to SysConf in that place.
Fixes Issue 2518
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5283 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed fps display in the top bar, now it shows the real fps of the game.
some code clean up and some corrections to make everything work right in the reference renderer.
multiples xfb now is broken even in single core as is was not an error caused by dual core, i really dono where the error is,everything looks correct but if you test a game with multiples xfb or the ipl you will see the error.
ector if you can take a look at he code and throw me some ideas i'll thank you.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5272 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed the obsolete projection hacks:
* Final Fantasy CC Echo of Time
* Harvest Moon Magical Melody
* Baten Kaitos
* Baten Kaitos Origin
* Skies of Arcadia
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5271 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the problem with wiimote plugin not saving information correctly for the auto reconnect option.
Fixes issue 2475
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5246 8ced0084-cf51-0410-be5f-012b33b47a6e
This still requires more work, like making the option only per Wiimote then rather the first one counting for them all.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5241 8ced0084-cf51-0410-be5f-012b33b47a6e
applied mlkbouba patch to make Mario Strikers Charged Football work (i do not own the game so please test).
some minor tweaks to the plugins to improve performance. for game that do not use xfb the best settings are dual core enabled, audio throtle disabled, frame limit set to the desired value, and xfb off.
change the frameskip calculations to use fps instead of vps as in dual core vps != fps caused by unresolved sync problems, till this problems are fixed the best for game play is calculate times in base of fps.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5239 8ced0084-cf51-0410-be5f-012b33b47a6e
functions are passed by value rather than by reference
This is part of a bigger change so please report if it broke compile
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5228 8ced0084-cf51-0410-be5f-012b33b47a6e
This fixes an error message when trying to play Mario Kart Wii over WFC, although it still fails when trying to connect now.
Also fix some cosmetic issues (double include and indentation).<NeoBrain Patch>
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5222 8ced0084-cf51-0410-be5f-012b33b47a6e
Changed the default font for the log window to the local font (why was a Japanese font the default?). Also fixed an issue that prevented the log windows settings from being saved properly. Lots more needs to be done with the AUI manager. That stuff doesn't work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5213 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed minor font issue with wiimote pad button dialog.
Removed unnecessary OpenGL_MakeCurrent call from DoState.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5209 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed a segfault in linux when a cd/dvd drive is empty or invalid and "Boot from DVD" or "Show Drives" are selected.
On all platforms if a game fails to load show the game list again.
The other things here are essentially code cleanup and won't be noticeable by most users.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5204 8ced0084-cf51-0410-be5f-012b33b47a6e
If you are having trouble with segmentation faults in linux try "shared_soil=true". That seems to fix the problem. How do we fix this for the static build?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5182 8ced0084-cf51-0410-be5f-012b33b47a6e
after some test the more relevant parameters were the color samples and the tlut max size.
so delete the rest of the parameters and define 3 modes:
Safe : the two values are set to 0 meaning all the texture data and all the tlut data are hashed this is the most correct and slowwwwwwwwwww way
Normal: 37 samples are taken from the color textures an the firs 4096 bytes of the tlut are hashed, is a lot faster than safe mode but in some games i observe small glitches.
Fast: 8 samples are taken from the color textures an the first 1024 bytes are hashed from the tlut, is a little slower than the unsafe cache but at least all the games i tested have correct text output and fast frame rate. the glitches in dinamyc color textures are more noticeable in this mode
this values could be improved, if you find a better combination please post it and the game it fixes and i will update the source.
for the moment, as my time is limited by a lot of work, only implemented the d3d gui, if someone can implement the opengl gui will be a lot of help for me.
please test a lot and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5135 8ced0084-cf51-0410-be5f-012b33b47a6e
Enabled the fix on Linux x64.
Aligned the stack before calling the LoadStorePaired asm functions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5122 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed a misbehavior in the clear code that causes depth clear problems in reference hardware (Intel as example).
add 6 parameters to optimize Safe Texture Cache:
SafeTextureCacheColorSamples, SafeTextureCacheIndexedSamples, SafeTextureCacheTlutSamples:
this 3 parameters gives the number of samples taken to calculate the final hash value, less samples = more speed, more samples = more accuracy
if 0 is specified the hash is calculated using all the data in the texture.
SafeTextureCacheColorMaxSize, SafeTextureCacheIndexedMaxSize, SafeTextureCacheTlutMaxSize:
this parameters limits the amount of data used for the hash calculation, it could appear as redundant but in some games is better to make a full hash of the first bytes instead of some samples of all the texture.
color, indexed, tlut : define the texture type, full color data, indexed, and the tlut memory.
the parameters are available in the config , no GUI at this time, if the test are OK will add it to the GUI.
if someone needs it will give more examples on how to configure the values for specific games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5116 8ced0084-cf51-0410-be5f-012b33b47a6e
GBAConnectionWaiter should take less cpu time, be threadsafe, and exit properly.
thanks to sl1nk3 and skidau
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5112 8ced0084-cf51-0410-be5f-012b33b47a6e
Works-for-me(TM), please test if I missed anything. All values should be initialized with the default values from either configuration or datatype.
Fixes Issue 2334
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5094 8ced0084-cf51-0410-be5f-012b33b47a6e
SysConf: removed the Save call in the dtor, this crashes on linux trying to read m_Filename (which might be already freed).
Common: set eol-style native, again.
Fixes Issue 2332
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5082 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed X event loops from GCPad and Wiimote plugins, and implemented an asynchronous check for keyboard and mouse buttons.
Also added an X event loop in core that handles events while the emulator is paused. Prevents unexpected behavior from events that occur while the emulator is paused.
Now there is only one event loop running at a time (besides those hidden in SDL).
I will revert this commit if other devs are unhappy with it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5048 8ced0084-cf51-0410-be5f-012b33b47a6e
sorry to tell but this will bring a speed drop, so let you decide if this change stay or not.( used the fastest open source hash algorithm i know)
do not apply full hashing to other format because it kills the performance.
for popular request added 9x SSAA believe me will kill your graphic card even if is the best but the image quality is exceptional.
as always please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5034 8ced0084-cf51-0410-be5f-012b33b47a6e
implement proper window handling (d3d/sw) which i believe fixes a hang that occurs when a game is stopped (plz test this :)) + some minor stuff
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5030 8ced0084-cf51-0410-be5f-012b33b47a6e
emulator. Also added the ability to close the emulator with the escape key.
Fixed an issue that caused a segmentation fault when trying to close the
emulator when running in fullscreen mode, which can also be done using the
escape key. This makes fullscreen mode useable in linux!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5023 8ced0084-cf51-0410-be5f-012b33b47a6e
Bit of cleanup/grouping, control creation is now a bit more separate from value setting and tooltip assignment which IMO cluttered the code as it was.
Removed something from main.cpp that looked like a hack to me.
Fixes Issue 2229
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5021 8ced0084-cf51-0410-be5f-012b33b47a6e
linux. This could confuse users, as it does nothing in linux. Mouse hiding is
set from the GL video plugin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5008 8ced0084-cf51-0410-be5f-012b33b47a6e
chage the global format of the screenshots to bmp, is correctly supported by both plugins and is faster.
reverted the changes in safe texture cache, will try to make them more stable then commit them, this should fix compilation in linux and macand error introduced in MP games
corrected all the issues commented by ector, thanks for the comments alway is good that the code is revised by others to find missed spots.
please report any remaining issue to solve them.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5001 8ced0084-cf51-0410-be5f-012b33b47a6e
first fixed scaling when updating backbuffer to make it friendly with encoders, now frame dumping must work without errors in any codec.
clean screenshot and frame dumping code now is more correct, faster and stable.
improve safe texture cache, improving the distribution of the hash algorithm, including tlut hash in the final hash of the texture, and making use of a 64 bit hash to make it more accurate.
clean a lot of code and corrected some missused vertex formats when drawing full screen quads.
and biggest change last:
implemented pseudo antialiasing: a image post-process algorithm that mimics antialiazing and is fare more easier to implement in this scenario.
you can change the intensity of the effect changing the values of the antialiasing combo. the right value depends on the game.
for example mkwii looks awesome with 8x.
please try all the changes and let me know the results.
if something is broken, please let me know and will fix it asap.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5000 8ced0084-cf51-0410-be5f-012b33b47a6e
Basic usage: "sudo scons install=global install"
Hopefully this doesn't break builds on Macs. I have tested this on linux and windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4994 8ced0084-cf51-0410-be5f-012b33b47a6e
Update issue 2097
Summary: Linux segfault with LoadStorePaired enabled
Disabling LoadStorePaired might affect performance just as Sonics change in r4897 does with OSX.
Leaving this issue open since this is not a fix, just a workaround; this and Issue 2053 might suffer from some problem with Paired instructions altogether.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4993 8ced0084-cf51-0410-be5f-012b33b47a6e
This fixes some flickering and resizing stuff when using Render-to-main, where the GameListCtrl would not be hidden (and show over the rendering surface)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4986 8ced0084-cf51-0410-be5f-012b33b47a6e
e.g. When last time you closed Dolphin on a second monitor but now you have ejected that monitor or have changed the position from horizontal tile to vertical tile.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4957 8ced0084-cf51-0410-be5f-012b33b47a6e
Enable the thread by adding this line to the video plugin ini files, "User\Config\gfx_dx9.ini" and "User\Config\gfx_opengl.ini":
UseFIFOThread = True
The line should be added under the UseXFB line.
To disable the FIFO thread, use this line:
UseFIFOThread = False
If the line is not in the ini file, the default is disabled (i.e. False).
The FIFO thread causes an error when the OpenGL plugin is used. The D3D plugin works.
Only top left quarter of the screen can be seen when rendering to main window. The entire screen can be viewed when running in a window.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4930 8ced0084-cf51-0410-be5f-012b33b47a6e
Center DX9 window
Bring Wiimote reconnect confirm dialog to topmost, now only works with OpenGL.
(It seems DX9 in full screen doesn't like other windows overlapped upon it.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4895 8ced0084-cf51-0410-be5f-012b33b47a6e
Advantages:
* Less confusion for users
* No need to build twice to make sure you didn't break something
* Easier to switch between the cores for testing
Disadvantages:
* None, as far as I can tell :) Maybe some extra code complexity, but not much.
Also break some include chains that caused <windows.h> to get included into everything, slowing down the build on Windows. There's more to do here though, there's still a lot of files that get it included that don't need it at all.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4891 8ced0084-cf51-0410-be5f-012b33b47a6e
in opengl correct an error introduced by mi in efb to ram alignment, it's seems to fix SMS but it missalign a lot of other games, so revert to the default. must solve truncated coins in NSMB.
revert alpha testing values to the values in rev 4812 as they fix some games.
in d3d dynamized the Render target size so it will change at runtime when viewport exceed it size, in the worse case it will cause a missing frame when resizing but in the games I tested is not noticeable at all
This must solve all the remaining viewports problems in nvidia cards, in ati this is not needed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4888 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed log window docking
* Fixed multi-selection in the game list
* Fixed last filename selection. Dolphin remembers the last game/elf/file that you loaded and will load that if you press the Play button without a default ISO selected and without selecting anything from the game list.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4887 8ced0084-cf51-0410-be5f-012b33b47a6e
Note that running in debug mode (Dolphin.exe -d) still maximizes the window and stores that size aswell.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4879 8ced0084-cf51-0410-be5f-012b33b47a6e
* Made the debugger toolbar height match the other toolbars.
* Centered the disasm on the current instruction
* Allow one click view of the JIT'd code
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4878 8ced0084-cf51-0410-be5f-012b33b47a6e
The algorithm and lookup table are 99% accurate which is far better than the approximation that Dolphin had previously.
The frsqrte instruction is used for a lot of 3D graphics functions so this change may help fix graphics glitches.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4864 8ced0084-cf51-0410-be5f-012b33b47a6e
SD_IV should not be global, thanks to interdpth as I was only testing with one save before
remove duplicated code from BannerLoaderWii.cpp
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4863 8ced0084-cf51-0410-be5f-012b33b47a6e
* must use a truncating float-to-int conversion, for example.
* introduce optimized variants of the single value psq_st operation (JIT only).
* fix bug in SafeWriteRegToReg when swap = false
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4861 8ced0084-cf51-0410-be5f-012b33b47a6e
in videocommon little fix for the alpha test values, return to the original values as they are more accurate.
in D3D:
huge change in state management, now all the state management is centralized and redundant state changes are eliminated.
Fixed the overlapped viewport error in non ati cards:
the error was caused by this: when a viewport is defined larger than the current rendertarget, an error is thrown and the last valid viewport is used, this is the reference behavior, in ati cards if a larger viewport is defined, no eror is returned, the rendering is valid and is rendered using the projection defined by the viewport but limited to the rendertarget are, exactly like opengl or the GC hardware.
to solve this in reference drivers defined a large rendertarget (2x the size of the original) and proceed to render in a centered quad insithe the larger rendertarget, in this way larger viewports always falls inside a valid rendertarget size, the drawback of this is the waste of resources. it can be dynamized, depending or games or changed at runtime when a oversized viewport is detected, but i live that to future commits.
please test this and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4841 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added BAT algorithm
* Page Address translation algorithm is now used in all games
* Added TLB cache
* Temporarily forced JITIL to use the slow memory access for Win32 when playing tlbhack games.
F-ZERO GX is now playable. It works only on JITIL in the 32bit version. It works in both JIT and JITIL on x64.
The MMU code may fix other games that are crashing.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4839 8ced0084-cf51-0410-be5f-012b33b47a6e
use at your own risk as it has been tested only to the point that a real wii recognizes the save on an sd card
Please post test results here or on issue 1945
removed the automated backup when importing from a save.bin
fixed display of pokemon titles in memcardmanager
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4829 8ced0084-cf51-0410-be5f-012b33b47a6e
addis, cmpis, xori operate on ACx.M instead of ACCx
addax, subax, movax use whole AXx reg, not just AXx.L
addpaxz uses whole AXx instead of AXx.H
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4817 8ced0084-cf51-0410-be5f-012b33b47a6e
if it hangs on stop now please report so we can fix it.
2. Change linux to use the same threading module in single core mode as windows
Anyone knows which revision broke dual core mode on linux?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4803 8ced0084-cf51-0410-be5f-012b33b47a6e
Change some PanicYesNo to AskYesNo so that they will always show (WiiSaveCrypted.cpp)
Adds more country filtering options to Gamelist (france, italy, korea, taiwan, and unknown country)
Misc. fixes for potential crashes that can only occur with a corrupted dump == check filesize of a dump before spending time looking for the cause of a crash :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4802 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed the panic alert about HCI_CMD_INQUIRY because it doesn't crash Dolphin or anything like that...
It's called from MiiChannel, when you try to upload your Miis to a WiiMote.
And it works just fine! (except for the warning "Can't find Wiimote by bd: xx:xx:xx:xx:xx:xx", which is really odd)...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4800 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Fixed a bug (for Win 32bit) that reports "No possible memory base pointer found!" even when there IS valid memory base found.
3. Made Metroid Prime 2 (maybe also other games) boot
PS: There is definitely some initialization problem with Dolphin (not found exact location yet), which prevents Metroid Prime 2 from first time booting (If you boot some other GC game first, stop it, then MP2 can boot without problem).
So I added an instant BP hack that can make MP2 boot even at first time.
And I've tested all my games to guarantee it won't break any game that already boots before this hack.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4795 8ced0084-cf51-0410-be5f-012b33b47a6e
Also makes VPS visible as sl1nk3 suggested, so that it won't confuse people with a wrong percentage of speed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4791 8ced0084-cf51-0410-be5f-012b33b47a6e
Now the frame limiter yields on CPU thread, not as before on GPU thread mistakenly
2. Fixed clear of VI interrupts
I guess VI interrupts are not used at all, because they were never cleared before
3. Made GPU thread 0% processor usage when paused whatever your active config is.
I tried the event approach but somehow the thread resume latency is excessively long (Who can tell me why?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4790 8ced0084-cf51-0410-be5f-012b33b47a6e
All you gotta do is Pause the emulation! That's useful for when your batteries run out during gameplay, for example...
But if you change the WiiMote source (between Emulated, Real or Inactive) you must disconnect and reconnect (Menu Tools -> Connect WiiMote) the WiiMotes affected by the change...
Thanks to jack.fr0st who did all the emulation state notification work!
Now every plugin has a way to know the current emulation state (paused, stopped or playing)
@ayuanx: I thought about doing a PostMessage(g_WiimoteInitialize.hWnd, WM_USER, WIIMOTE_DISCONNECT, current_number); so that the user gets asked to reconnect that WiiMote, trying to avoid having to disconnect and reconnect, but it didn't work because shooting that message only asks to reconnect, doesn't do a disconnect... Do you have any ideas on how to accomplish that?
Also, if anyone could check if Issue 1916 is finally fixed... Or at least when is the cursor being hidden or not...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4789 8ced0084-cf51-0410-be5f-012b33b47a6e
so far only tested with NSMB save (which works)
!!backup any existing save before importing save for the same game!!
also adds VS files and folders to the ignore list
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4784 8ced0084-cf51-0410-be5f-012b33b47a6e
JitBlockCache::GetCompiledCodeFromBlock() now casts the correct pointer, which allows the PPC <-> x86 translated code viewer to work.
Fixes issue 1935.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4781 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed Issue 1917
(Since wxWidgets is not allowed in core, so I moved the popup window to CFrame)
*Maybe* this could also fix Issue 1919?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4780 8ced0084-cf51-0410-be5f-012b33b47a6e
"VideoFifo_CheckEFBAccess()" & "VideoFifo_CheckSwapRequest()" should be moved to a more suitable place than inside function "Fifo_EnterLoop()", which wastes considerable amount of CPU time (exhausting one core completely even when paused) and also makes VPS inaccurate.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4778 8ced0084-cf51-0410-be5f-012b33b47a6e
This also fixed Ikaruga, not sure whether it could fix Metriod Prime. If not, how about disabling EFB copy?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4777 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes the log line a bit too long in my taste so if anyone got
an idea of how to make it look nicer i.e making it optional or adding it only to errors/warnings
do share
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4776 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Fixed Issue 1909
Multi-Nunchuck control problem
3. Updated SYSCONF, which should enable games that require MotionPlus, such as "Wii Sports Resort"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4773 8ced0084-cf51-0410-be5f-012b33b47a6e
Unbreak linux stop on Single Core, remove an unnecessary wait event, fix DSP HLE/DSP LLE/OGL plugin hang on stop when the config dialog has been opened (nJoy and Wiimote still need to be fixed), avoid the CpuThread to be stuck in the efb/swap loop by setting a flag before the thread is actually shutdown (contrary to r4756 which was setting it.. after :D)
Clear the status bar Framerate/Core message when the game is stopped.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4769 8ced0084-cf51-0410-be5f-012b33b47a6e
Only downside: You can't change between Real and Emulated WiiMotes while the game is running anymore... This is due to the way the Real WiiMotes are assigned to the slots...
I've tested it with 2 real WiiMotes, but I can't see why it wouldn't work with 4!
Also, you can assign Real or Emulated WiiMotes to any one of the four slots that it will be respected!
Happy New Year everybody!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4765 8ced0084-cf51-0410-be5f-012b33b47a6e
- It's worth noticing that both in OGL and D3D the Config options for Always and Auto Hide Cursor have no effect. I can't get (read) those values in D3DBase.cpp ...
* Some more key bindings
* Removes duplicate ifdef _Win32 from VKToString
* Made VKToString a little faster (smarter) (but don't expect any speedups though...)
* Corrects Pal60 name in Config (it was Pal6)
I'm still trying to figure out why the Toggle Fullscreen Button doesn't work...
Also I really thought about commiting my changes to Wiimote_real, which are tested and working for 1 real wiimote, but I need someone to test them with more than one real wiimote (I only have one)... See Issue 1876 ...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4757 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Connect/Disconnect Wiimote on the fly, no need to pause game
PS: Toggling full screen by ESC in DX9 doesn't work yet, it will close Dolphin instead at the time.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4754 8ced0084-cf51-0410-be5f-012b33b47a6e
And I'm afraid there are even more wxString::FromAscii() :(, hopefully they don't need to be displayed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4748 8ced0084-cf51-0410-be5f-012b33b47a6e
Wii games now show their description in the gamelist instead of the company (= always "N/A"), fix SJIS handling using wxString code instead of Win32 code, fixes some broken characters in the gamelist and ISOProperties.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4740 8ced0084-cf51-0410-be5f-012b33b47a6e
* You can connect/disconnect one or more WiiMote from Menu->Tools any time (must pause game first)
* Up to 4 Emulated Wiimotes can work together at the same timer
(PS: "Wiimote_Real" needs to be rewritten to support Multi-WiiMote, and it could be broken already now)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4736 8ced0084-cf51-0410-be5f-012b33b47a6e
This fixes on WiiMote Button Mapping:
Num /
Num *
Num Decimal
Num Separator
Num Lock
Right Alt -> But on keyboards that have "Alt Gr" keys it still gonnal report it as Left Ctrl, because when you press it, the OS sends a Left Ctrl then a Alt key...
Also fixes on SimplePad Button Mapping:
Num Decimal
Num Separator
Num Enter
Num Lock
Right Shift
Right Ctrl
Right Alt
Also it now differs Left (Ctrl|Shift|Alt) from the Right ones...
All keys should be working now... I left "Print Scrn" and "Pause" out because I don't think those can (or should) be bound...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4735 8ced0084-cf51-0410-be5f-012b33b47a6e
Show the correct name for the HOME key when pressed on Button Mapping dialog. (It was displaying "Num 7" when you pressed the Home button (the one above "End")).
Yeah, I know, it really is a silly fix... But hey, it's still a fix! =P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4734 8ced0084-cf51-0410-be5f-012b33b47a6e
. Performance boost
(Completely non-blocking between Sound thread and CPU thread, in the meantime keeping them thread safe)
. Both 32KHz & 48KHz sound can be handled properly now
(But up-sampling is still not implemented, and I don't think any game requires it.)
. Strategy adjustment
When your PC is *NOT* capable to run the game at 100%:
>> DSound Could yield more fluent sound than OpenAL sometimes, but you will lose the sync between video & audio (since audio is played before video to guarantee fluency)
>> OpenAL Ensures video & audio are always sync'ed, but sound could be intermittent(to let slow video catch up)
. Changed default frame limit to: Auto
(Somehow this can dramatically decrease the chance of wiimote desync in game NSMB)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4724 8ced0084-cf51-0410-be5f-012b33b47a6e
* ble involving CR flags was branching the wrong way around.
* xorx now works when sent the same register for both the src and dest
* lbzu disabled (same as JIT) fixing a Dolphin crash
* JITIL provided with the memory exception handler fixing crashes when memory is read out of bounds.
These fixes are able to get F-Zero GX in-game when JIT FloatingPoint is disabled. Once in-game, F-Zero retires the player just like it does in JIT.
This change might fix Dolphin crashes involving JITIL in other games too.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4723 8ced0084-cf51-0410-be5f-012b33b47a6e
. Fixed Sample Rate for DSP
(Now if your CPU is capable to run game at 100%, you will get pure sound without buzz or static noise)
. Fixed Sample Rate for AI
(Now if your CPU is capable to run game at 100%, you will get sync'ed video and audio)
. Fixed Backend list for DSPLLE
. Improved Aduio DMA a bit
(There might be a completely redesign in following phases)
WARNING: The whole rework will take time to complete.
This commit is compilable, but could be unstable.
So you can try it and test it but don't take it as a release rev!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4717 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add an option to enable the EFB scaled copy *TODO find a better place for it to go.
SOIL - Update stb_image to the latest version (1.16 to 1.18)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4716 8ced0084-cf51-0410-be5f-012b33b47a6e
There was a problem with the fog calculations... Now NSMB shows the background, while the fog still works!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4714 8ced0084-cf51-0410-be5f-012b33b47a6e
But Dolphin's sound stream system really needs a rethink.
Because this is the root cause of constant blocking.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4711 8ced0084-cf51-0410-be5f-012b33b47a6e
BTW: I doubt "Zelda Twilight Princess" save file might be broken since r4704, anyone who has got this game please have a test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4708 8ced0084-cf51-0410-be5f-012b33b47a6e
MKWii can now be played even if you don't have a save file, but it will fail to save and tell the file is corrupted each time you'll launch it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4706 8ced0084-cf51-0410-be5f-012b33b47a6e
Because commenting out this behavior fixes Silent Hill Shattered Memories.
If this commit breaks any game, please report.
PS: There is a EnterCriticalSection in fifo.cpp, which performs the Read Access, but there is no EnterCriticalSection in CommandProcessor.cpp which performs the Write Access, so how can we guarantee the Write Access is atomic?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4694 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix aram handling in wii mode - was doing strange things with aram AND mem2 space - only mem2 exists on wii. Let me know if this breaks anything...
Fix Wii BS2 HLE - don't zero out bytes 6 and 7
Thanks to skidau for finding the ssbb error cause :)
Fixes issue 303
Fixes issue 1479
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4687 8ced0084-cf51-0410-be5f-012b33b47a6e
PS: Mario Kart Wii cannot create a new savedata because it tries to seek position in file "rksys.dat" with a very huge number even though it already knows the file is newly created, and then write to that file with 2MB data of all zeros (wrong mem addr?).
Can't find a reason yet.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4678 8ced0084-cf51-0410-be5f-012b33b47a6e
in D3D and Opengl:
fixed one nasty bug in texture loading where if a dynamic texture keeps his format but the tlut format is changed, the try or reloading the texture in the same texture could cause a hang if the size of the resulting texture is different than the original (size in bytes)
Applied a ugly temporal hack to the texture conversor to solve efb to ram misalignments and effect distortions.
in D3D:
Pseudo implementation of logic ops using basic blending: the first 8 operations are "good approximations", the remaining 8 are bullshit :) if someone have a better approximation to emulate this logic please let me know.
please test if i don't break anything in the process and test Mario kart wee you will get a nice surprise.:)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4656 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Change the frequency of WiiMote report sending to 100Hz which complies with real Wiimote hardware.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4655 8ced0084-cf51-0410-be5f-012b33b47a6e
2) Commented out "SendEventNumberOfCompletedPackets()", I intend to have wider tests on this, if **this revision** causes frequent wiimote de-sync, please report.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4647 8ced0084-cf51-0410-be5f-012b33b47a6e
No need to use "Sound Loop Hack", so I just removed it.
2. Fixed the WAD game loading issue. What can I say, I have to go though and patch all the WII_IPC_HLE devices to take care of this.
3. Applied tomman's Linux keyboard patch, but I can't test here, no suitable environment.
4. Disabled configuration dialogs when game is running, you have to pause game first to be able to change any configuration. (Which prevents some accidental crash to happen.)
5. Other trivial fixes, no need to mention.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4632 8ced0084-cf51-0410-be5f-012b33b47a6e
Just press the "Shake" key.
The shake involves all the three axes: X, Y, Z.
So when you press the shake key, you are actually shaking not only up-down, left-right, and forward-backward at the same time.
I did this becuse different games may require different directional shake, no need to seperate them to 3 keys I think.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4624 8ced0084-cf51-0410-be5f-012b33b47a6e
I know hack is not good but before we find a better way to detect different games, at least this option allows some games to output normal sound without breaking other games.
Besides, this commit will hopefully fix the "Unknown device: /dev/usb/hid" issue, but not sure as I have no game to test on this issue.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4623 8ced0084-cf51-0410-be5f-012b33b47a6e
D3D: add the EFB Copy option to complete Rodolfo's commit plus add the Overlay FPS and the Disable Fog options
also change the config dialog's behaviour a bit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4622 8ced0084-cf51-0410-be5f-012b33b47a6e
Now efb to ram display correctly but still is misaligned by one pixel
please test and give me feedback
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4618 8ced0084-cf51-0410-be5f-012b33b47a6e
This commit fixed the Hang-up in many games, like "New Super Mario Bros. Wii", "Resident Evil: The Darkside Chronicles", "Fatal Frame 4: Tsukihami no Kamen", "Muramasa: The Demon Blade", and etc. You name it. OH YEAH!
This little issue really cost me some *serious* debugging time, phew...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4616 8ced0084-cf51-0410-be5f-012b33b47a6e
Besides this should boost the performance by a little.
Warning: Remember to set "Framelimit" to: Auto or 60, or else Emu Wiimote will lose sync in a second.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4613 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed more memory leaks when doing state load. Now all file devices(handles) are stored in state, and this will fix some crash after loading state.
Warning: Do NOT Save/Load state before game title is shown and controllable, or else you will get a corrupt state.
If you encounter "Emu WiiMote Desync" frequently, please report the condition
(PS: To recover from wiimote desync, just load a saved state)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4608 8ced0084-cf51-0410-be5f-012b33b47a6e
Also reimplemented screen clearing as a color quad to support alpha blending when clearing as in the original hardware.
the funny thing is how is implemented peeking, as locking depth textures is not supported, implemented peeking copying the values form the depth texture to a r32f render target and then reading back the data.
please a lot of testing to this commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4599 8ced0084-cf51-0410-be5f-012b33b47a6e
first part if fixing, fixed, i thing, the flickering that everyone has reported, at least in my case i only have flickering in the one texture in one game and now is fixed. The other fix is not for an reported issue, is more a correctness fix, running dolphin with pix to review debug errors, result in a ton of warnings and error, now with this commit, at least for ati, there no more error or warnings, this means, correct management and state change, no accurate emulation, for this still a lot of work to do.
for this part of the commit please give me feedback and let me know of remaining issues
Te second part is the partial implementation of efb to ram copy in d3d, this won't brake anything because is commented but i commit this to ask for help from ector and donko in some errors remaining in the implementation related to differences between opengl an d3d.
if you want to test this you have to uncomment line 150 to 155 of bpstruct.cpp
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4594 8ced0084-cf51-0410-be5f-012b33b47a6e
skidau