6a99cbd9fc
VideoCommon: Call Renderer::SurfaceChanged on render parent resize
...
This is needed because for some reason the WSI for NV Vulkan drivers
doesn't return VK_ERROR_OUT_OF_DATE_KHR, so there is no other way to know
that a resize has occured apart from polling, which is a poor solution for
X11 (since it is blocking).
2016-10-01 01:09:12 +10:00
5346078791
VideoCommon: Add config fields for multithreading and validation layers
2016-10-01 01:09:12 +10:00
09638e714e
VideoCommon: Extend DriverDetails to support both OpenGL and Vulkan
2016-10-01 01:09:12 +10:00
d9c034e8cc
ShaderGen: Specify attribute/output locations/bindings explicitly
...
This also shifts the SSBO index from index 3 to index 0.
2016-10-01 01:09:11 +10:00
9f541e490d
OGL: Handle case where both constant alpha and logic op is enabled
2016-09-30 23:18:14 +10:00
cb759528e0
Merge pull request #3893 from hthh/perf-query-bug
...
Improve PerfQuery accuracy
2016-09-27 13:07:35 +02:00
c9ef042b2d
Software: Clean out unnecessary includes/fwd decls
2016-09-24 05:28:00 -04:00
ab28ef5cff
FramebufferManager: Add missing header guard
2016-09-23 13:55:51 -04:00
330944eef8
DebugUtils: const correctness
2016-09-22 21:05:17 -04:00
5ac161c132
TextureEncoder: const correctness
2016-09-22 21:01:56 -04:00
eb574e7bac
NativeVertexFormat: const correctness
2016-09-22 21:01:55 -04:00
5f1e444c28
Clipper: const correctness
2016-09-22 21:01:49 -04:00
d79d5d49f4
Rasterizer: const correctness
2016-09-22 20:39:28 -04:00
2d0e857cb3
Merge pull request #4225 from lioncash/soft
...
SWVertexLoader: Value initialize SetupUnit instance
2016-09-22 16:05:32 +02:00
a8c8dd0c53
SWVertexLoader: Value initialize SetupUnit instance
2016-09-22 09:58:44 -04:00
5890565575
Merge pull request #4233 from lioncash/efb
...
EfbInterface: Change out parameters on getters to return by value
2016-09-22 10:49:33 +02:00
33288c4569
EfbInterface: Change out parameters on getters to return by value
2016-09-21 20:56:44 -04:00
fc41e982e9
SWOGLWindow: Utilize the move constructor in PrintText
...
The previous code would always do a copy
2016-09-21 13:11:34 -04:00
99baa3268f
SWOGLWindow: const correctness for ShowImage
2016-09-21 12:54:22 -04:00
5b3c74a31a
OGL: Remove unnecessary c_str calls
2016-09-09 06:30:34 -04:00
f5c70a4b27
EFB2RAM: Downsample higher resolutions with linear filtering.
2016-09-07 11:17:32 +12:00
9d8f373016
VideoSoftware: Don't Init the PixelEngine twice
...
PixelEngine is initialized by InitializeShared()
2016-09-03 15:12:41 +10:00
da82389347
Merge pull request #4172 from phire/software_fog_error
...
VideoSoftware: Fix unsigned overflow bug in fog
2016-09-02 09:53:44 +02:00
0e7424b359
VideoSoftware: Fix unsigned overflow bug in fog
...
Was causing fog errors on the left half of the screen.
Only appeared to affect visual studio builds, GCC did the correct
thing.
2016-09-02 10:12:44 +12:00
2ab9e5e610
Merge pull request #4165 from lioncash/global
...
Backends: Remove unnecessary references to the renderer global
2016-09-01 03:20:31 +02:00
ec7114a658
OGL: Remove unnecessary renderer global references
2016-08-31 14:19:56 -04:00
168e145fae
D3D: Remove unnecessary renderer global references
2016-08-31 14:17:22 -04:00
9e26ef4aa8
D3D12: Remove unnecessary renderer global references
2016-08-31 14:14:51 -04:00
94cbe0c12a
Comments
2016-08-31 06:40:50 -05:00
e6ccd0729f
Revert postMat movement
2016-08-31 02:14:51 -05:00
89b1d613cc
Remove else in software renderer
2016-08-30 18:33:27 -05:00
e0a1ab9027
lint fix
2016-08-30 18:33:26 -05:00
8f69de51ca
inputform ABC1's q value is defaulting to 0
...
This is causing the 0 divide case to run when source row is using tex0-7 and inputform is ABC1.
2016-08-30 18:33:25 -05:00
767f56d7c8
Software renderer fix
2016-08-30 18:33:24 -05:00
0fbf72cbf1
Merge pull request #4140 from Armada651/ww-depth
...
D3D: Correctly invert the viewport depth range.
2016-08-24 02:28:53 +12:00
a8a9348913
OGL: Handle cases where reversed depth is already used.
2016-08-23 15:54:04 +02:00
65472260d8
D3D: Correctly invert the viewport depth range.
2016-08-23 09:57:11 +02:00
2bf05a544d
VertexManager: Correct variable naming scheme
...
Altered to indicate regular class members
2016-08-22 20:01:00 -04:00
f1964f90d6
Merge pull request #4129 from RisingFog/hahahahahahahahahaha
...
Fix a really stupid GLSL version parsing bug
2016-08-20 08:48:28 +12:00
da0204a85c
Fix a really stupid GLSL version parsing bug
2016-08-19 08:53:27 -04:00
31c530c7b3
Merge pull request #3386 from lioncash/memory
...
Common: Namespace MemoryUtil
2016-08-19 11:04:45 +02:00
e86d7cbc99
OGL: Workaround gl_ClipDistance bug on Mesa i965.
2016-08-18 01:08:39 +02:00
7078216b61
Improve documentation.
2016-08-16 21:09:58 +02:00
8c1c7fc2da
Cosmetics.
2016-08-15 13:11:30 +02:00
afa251af42
DriverDetails: Add bug for broken gl_ClipDistance on i965.
2016-08-15 13:11:28 +02:00
94927f360f
VideoCommon: Add a user-defined far clipping plane.
2016-08-15 13:11:28 +02:00
6e2052fae6
OGL: Disable clip distance on when not in a game-like state.
2016-08-15 13:11:27 +02:00
a141e91dd2
OGL: Check for GL_DEPTH_CLAMP support.
...
It's not available in OpenGL ES and officially it's not supported on OpenGL 3.0/3.1.
Fallback to old depth range code if there is no method to disable depth clipping.
It's more important to have correct clipping than to have accurate depth values.
Inaccurate depth values can be fixed by slow depth.
2016-08-15 13:11:26 +02:00
4582853af4
VertexShaderGen: Use reversed depth range.
2016-08-15 13:11:26 +02:00
e9e81ece65
VideoBackends: Enable depth clamping.
2016-08-15 13:11:25 +02:00
b1ed7e80fb
VertexShaderGen: Clip z using user-defined clipping planes.
2016-08-15 13:11:25 +02:00
c223bd47b9
VideoCommon: Implement depth range equation in vertex shader.
2016-08-15 13:11:23 +02:00
bce8097712
D3D11: Support texture dumping of non-zero mipmap levels
2016-08-10 23:45:25 +10:00
e01c143379
Common: namespace MemoryUtil
2016-08-07 13:03:07 -04:00
d078c6cb35
Merge pull request #4073 from amaiorano/fix-d3d-debugobjectname
...
Fix D3D::SetDebugObjectName to bind to the EFB color_read_texture rat…
2016-08-01 00:38:02 +02:00
2030a5e1b8
Fix D3D::SetDebugObjectName to bind to the EFB color_read_texture rather than the depth_read_texture (probably a copy paste error)
2016-07-31 10:48:09 -04:00
14e0b48ae4
VideoCommon: Make API_TYPE an enum class
...
Allows for forward declarations in most places, which prevents dumping
unrelated VideoCommon.h contents directly into headers.
2016-07-29 19:20:16 -04:00
8be5717a60
Improve PerfQuery accuracy
...
In TimeSplitters: Future Perfect, PerfQuery is used to detect
the visibility of lights and draw coronas. 25 points are drawn
for each light. However, the returned count was incorrectly
being divided by four leading to dim coronas.
Using 4x antialiasing was a workaround because of a bug where
antialiasing multiplied the PerfQuery results. This commit
fixes that bug too (but only for OpenGL).
2016-07-04 18:54:49 +10:00
28a3691e70
Merge pull request #3930 from RisingFog/split_video_dump_resolution
...
Split Video Dumps on Resolution Change
2016-06-27 22:39:19 -04:00
f31adf9635
Fix D3D crashes/issues
2016-06-27 10:13:17 -04:00
1b71249562
D3D: Fix crash on start with BBox enabled
...
Someone removed the BBox::Init(), causing crashes when BBox is enabled.
Fixes issue #9643 .
2016-06-27 12:45:00 +02:00
d79aeaa1e9
VideoCommon: Drop GetConfigName.
...
We're past 5.0 now, so there is no need to look for old inis.
2016-06-26 12:34:59 +02:00
5f2f462067
VideoBackends: Merge ShowConfig functions.
2016-06-26 12:34:59 +02:00
7833ff25df
VideoBackends: Merge Initialize and Shutdown functions.
2016-06-26 12:34:59 +02:00
ee9e3432cb
Merge pull request #3513 from phire/make_hdkr_happy
...
Get shadergen ready for Multithreadded generation of shaders.
2016-06-26 21:55:22 +12:00
fe73ae8526
Add missing override
2016-06-26 00:49:50 -04:00
2f134c5c36
Remove the rest of ShaderDebugging.
...
Without UID checking, it's basically a no-op that disables shader cache
and stores the shader source code (without ever reading it back).
2016-06-26 16:25:11 +12:00
ebe5fd0b36
Multithreadded Shadergen: Minor fixups.
2016-06-26 16:13:22 +12:00
95469ec225
Remove UID Checker.
...
Kind of pointless now that multiple shaders with the same UID are
now fundementally impossible.
2016-06-26 16:13:22 +12:00
24e5d21780
Multithreadded Shadergen: Second pass over Pixel Shadergen.
...
Note: It's not 100% perfect, as some of the GPU capablities leak into the
pixel shader UID.
Currently our UIDs don't get exported, so there is no issue. But someone
might want to fix this in the future.
2016-06-26 16:13:21 +12:00
1a831cfc7d
Multithreadded Shadergen: Second Pass over vertex/lighting Shadergens
...
As much as possible, the asserts have been moved out of the GetUID
function. But there are some places where asserts depend on variables
that aren't stored in the shader UID.
2016-06-26 16:13:21 +12:00
28c7113e41
Multithreadded Shadergen: Second Pass over geometery Shadergen
2016-06-26 16:13:21 +12:00
fdbda7b7dd
Null: Create Visual Studio project file.
...
Why is this so stupid on linux.....
2016-06-25 22:40:23 +02:00
59e4882af3
nullvideo: initial release of null video backend
2016-06-25 22:40:23 +02:00
43d0d692f9
Fix D3D12 headers missing includes.
2016-06-24 11:14:10 +00:00
3570c7f03a
Reformat all the things. Have fun with merge conflicts.
2016-06-24 10:43:46 +02:00
d197f489b9
analytics: Report OpenGL's adapter name too.
2016-06-20 23:54:44 +12:00
0e5852f634
[OGL] Workaround nvidia being weird with GL_MAX_TEXTURE_SIZE
2016-05-30 10:06:19 -05:00
14220ae488
Fix building with PCH disabled.
2016-05-26 13:05:21 -05:00
e169d54f3c
D3D11: Fix CPU EFB color reads when MSAA is enabled
...
Also swaps the byte order from RGBA->BGRA to match GL/D3D12, and what
the read handler is expecting.
Depth reads will now return the minimum depth of all samples, instead of
the average of all samples.
2016-05-19 22:51:00 +10:00
89e54fbd6c
OGL: Work around slowdown of glMapBufferRange with SSBO on NVIDIA drivers
...
Using glMapBufferRange to read back the contents of the SSBO is extremely
slow on NVIDIA drivers. This is more noticeable at higher internal
resolutions. Using glGetBufferSubData instead does not seem to exhibit
this slowdown.
2016-05-19 21:24:09 +10:00
22648729c7
Merge pull request #3832 from degasus/android
...
DriverDetails: Update Qualcomm new driver version.
2016-05-18 21:26:45 +02:00
3a452f3cc5
VideoSW: Fix XFB config.
2016-05-18 18:37:44 +02:00
fa3526962d
VideoSW: Drop Update in XFB copy.
2016-05-18 18:37:44 +02:00
bca0e06a95
OGL: Use coherent mapping on Qualcomm devices.
2016-05-11 23:55:28 +02:00
6219c39cf5
OGL: Drop QC ES3.1 workaround.
...
This was never tested well:
HdkR> The tester was most likely trying to load a stale shader cache or something
2016-05-11 20:45:07 +02:00
ccf9470241
D3D12: Specify read/write ranges when calling Map/Unmap
2016-05-08 23:18:59 +10:00
fde7dee652
D3D12: Fix invalid CopyTextureRegion call in CopyRectangleFromTexture
...
This was occuring when the source texture was larger than the destination
texture, but the source rect was <= dest rect, so the copy is valid.
2016-05-08 23:18:58 +10:00
9bff187547
D3D12: Cleanup startup/shutdown process
...
Sorts out references that cause some modules to be kept around after
backend shutdown.
Should also solve the issue with errors being thrown due to the config
being loaded after device creation, leading to the incorrect device being
used in a multi-adapter system.
2016-05-08 23:18:58 +10:00
4269abdc3e
D3D12: Implement perf query support
2016-05-08 23:18:57 +10:00
25d5da0ea3
D3D12: Remove D3D11 header references
2016-05-08 23:18:56 +10:00
6f3573dda8
D3D12: Implement XFB encoding/decoding (support Real XFB)
2016-05-08 23:18:51 +10:00
3372bfa6ab
D3D12: Remove feature level checks
...
We don't create a device below feature level 11_0 anyway, so no point
checking, we can just assume support.
2016-05-08 12:08:25 +10:00
063761fbd2
D3D12: Don't add padding when allocating within empty StreamBuffer
...
Resources are already aligned to an address larger than any of our
requirements, anyway.
2016-05-08 12:08:25 +10:00
0c27aae7d3
D3D12: Improve output of shader compiler errors
...
These were completely broken due to lack of c_str(). We also output
warnings now as well (these can be useful).
2016-05-08 12:08:25 +10:00
acfa93372e
D3D12: Refactoring and cleanups
...
Moves render target restoring to RestoreAPIState, this also means no need
to manually restore after allocating in a buffer that caused execution,
because the manager restores it for us.
Remove a method that wasn't used from D3DUtil.cpp, and fixes a few errors
in EFB poke drawing.
2016-05-08 12:08:25 +10:00
7ec1fce741
D3D12: Fix error with >1xIR/MSAA EFB depth access
2016-05-08 12:08:25 +10:00
ac1cd8279b
D3D12: Implement GPU-based bounding box
2016-05-08 12:08:25 +10:00
32599559db
D3D12: Use helper method for binding EFB render targets
2016-05-08 12:08:25 +10:00
984da2d624
D3D12: Use signed ints for viewport origin
...
Fixes black screen when crop is enabled.
2016-05-08 12:08:25 +10:00
a8c4d6c242
D3D12: Allow large texture uploads (>64MiB) by using temporary buffer
...
This is not optimal, but for those texture packs with extremely large
images, it won't crash. Releasing after the frame completes is an option
too, however, there is the risk of running out of memory by doing this.
2016-05-08 12:08:25 +10:00
1634948b6e
Merge pull request #3742 from phire/dither
...
Implement Dithering for video software
2016-05-03 22:41:39 +12:00
6f2d8483b7
VideoSW: Fix special case.
...
I have no clue what this special case shall be, but accessing g_main_cp_state within Flush() is not allowed.
We likely still have a bad behavior, but now it only depends on the current state, not on the next one after flushing.
2016-04-30 13:14:09 +02:00
8a21b082d6
Merge pull request #3745 from stenzek/d3d11-texcache
...
D3D11: Fix EFB MSAA depth buffer copies, StateManager desyncs in some cases
2016-04-24 11:47:32 +02:00
33c22ffab7
D3D: Amend code to fix a new VS warning
...
Fixes warning C4334
2016-03-30 20:59:57 -04:00
486d3a7114
Merge pull request #3656 from phire/windows-10-sdk-update
...
Updated D3D12 to build on the newer windows 10 sdk.
2016-03-30 18:37:53 +02:00
c036cf7a5f
Updated D3D12 to build on the newer windows 10 sdk.
2016-03-26 18:11:49 +13:00
2fd0884347
Merge pull request #3672 from EmptyChaos/d3d-anisotropy
...
Fix D3D Forced Anisotropy
2016-03-26 03:25:01 +01:00
066b6b0bcb
OpenGL: Cache query to max texture size.
...
This showed up really high when I was profiling things.
2016-03-26 03:14:39 +13:00
53cf42fb06
D3D11: Fix some cases where render target switches desynced StateManager
...
This was occuring in certain EFB copy patterns, leaving the textures
unbound for the next draw call.
2016-03-26 00:01:26 +10:00
63e4e07683
D3D11: Simplify MSAA depth texture resolving
...
This also fixes EFB depth buffer copies when MSAA is enabled.
2016-03-26 00:00:39 +10:00
0b9a72a62d
VideoCommon: Refactor TexMode0 mipmaps disabled test into a helper function
2016-03-24 13:43:29 +11:00
902e5cddf7
VideoBackends: Do not use Anisotropy on Point filtered textures.
...
The D3D backend was always forcing Anisotropic filtering when that is enabled regardless of how the game chose to configure the texture filtering registers; this causes the same issues as "Force Filtering" without Anisotropy, such as causing game UI elements to no longer line up adjacent correctly. Historically, OpenGL's Anisotropy support has always worked "better" than D3D's due to seeming to not have this problem; unfortunately, OpenGL's Anisotropy specification only gives GL_LINEAR based filtering modes defined behavior, with only the mipmap setting being required to be considered. Some OpenGL implementations were implicitly disabling Anisotropy when the min/mag filters were set to GL_NEAREST, but this behavior is not required by the spec so cannot be relied on.
2016-03-24 13:43:29 +11:00
51dc779b7c
Implement Dithering for video software
2016-03-23 12:29:35 +13:00
e4f984d5dd
Minor fixes to the partial updates code
...
- remove an outdated comment about the efb to ram and scaled efb restriction
- when upscaling efb copies, mark the new texture as efb copy
- dx12 fixes for the src box, especially the number of layers for 3D
2016-03-16 22:24:11 +01:00
ab44d2ec5c
VideoSW: Drop SetTevReg for colors.
2016-03-06 11:05:49 +01:00
7a154181b4
VideoSW: Drop SetScissor().
...
Just access the global state directly.
2016-03-06 10:24:28 +01:00
8b0fd623e5
VideoSW: Drop SetViewOffset.
...
Just use the global state.
2016-03-06 10:22:44 +01:00
c2802f96a6
Merge pull request #3655 from jcowgill/spelling-fixes
...
Fix some very minor spelling mistakes
2016-03-02 14:04:05 -05:00
cc36dec9b5
D3D12: Cleanup DX12::Renderer::SetSamplerState
...
Remove uninitialized non-static variable. Replace test to avoid unnecessary state changes with a simpler one.
2016-03-01 23:55:19 +11:00
07ff8379ba
Merge pull request #3647 from stenzek/d3d12-fences
...
D3D12: Multiple fixes (texture cache, fences, MSAA, CPU EFB access)
2016-02-29 16:49:03 +01:00
961901daae
Merge pull request #3355 from mimimi085181/partial-texture-updates-check-dimensions
...
Partial texture updates: Check the dimensions of the efb copy
2016-02-29 00:49:48 +01:00
0a96e2f531
D3D11: Fix texture dumping, for both single and multi-mip textures
2016-02-28 17:24:47 +10:00
c793459b88
D3D12: Fixed issue where EFB copies could end up corrupted after reset
...
Also prevents previously-released textures from ending up in a descriptor
table.
2016-02-28 17:24:46 +10:00
74275bdfe3
D3D12: Don't keep screenshot/encoder buffers mapped
...
Readback heaps do not support persistent mapping. See D3D12 docs.
2016-02-28 17:24:09 +10:00
c4d79d6db3
D3D12: Add helper method for setting both viewport and scissor rect
...
Simplfies making changes, as well as keeping the two in sync.
2016-02-28 17:18:46 +10:00
13e143de38
D3D12: Optionally prevent StreamBuffer from executing command list
...
This applies to callers that do not have full knowledge of the command
list state, and thus, cannot restore it should allocations cause command
list execution. Instead we reallocate a new buffer. Should not happen
often enough for this to be a concern, as it's mainly for the utility
classes.
2016-02-28 17:18:46 +10:00
04257029e0
D3D12: Don't enumerate outputs, it's not used anywhere
...
The D3D12 backend does not support exclusive fullscreen.
2016-02-28 17:18:45 +10:00
9efe66509d
D3D12: Fix crash/errors when switching MSAA modes while running
2016-02-28 17:18:44 +10:00
1d909ec7a4
D3D12: Implement non-blocking EFB access when EFB has not been modified
2016-02-28 17:18:43 +10:00
6bbf836ea9
D3D12: Simplify and fix MSAA EFB depth copy path
2016-02-28 17:18:43 +10:00
649b94338e
D3D12: Cleanup/refactoring of teardown process
2016-02-28 17:18:42 +10:00
759b77474d
D3D12: Use std::thread for worker thread
...
Using CreateThread can create issues if any CRT calls are made, as
thread-specific data may not be initialized. Additionally, TerminateThread
is not a good idea for similar reasons, and may not free CRT resources.
2016-02-28 17:18:41 +10:00
ffe0e326d2
D3D12: Use stream buffer for CD3DFont
2016-02-28 17:18:40 +10:00
5c1a708977
D3D12: Clean up debug device creation path
2016-02-28 17:18:39 +10:00
efbb85da43
D3D12: Improve robustness of command allocator and fence tracking
2016-02-28 17:18:39 +10:00
2f7870b046
D3D12: Don't add fence tracking entries without buffer offset changes
2016-02-28 17:18:38 +10:00
31bc0cf2c3
D3D12: Don't clear texture SRV on destruction, as it may still be in use
2016-02-28 17:18:37 +10:00
db8dbae131
Fix some very minor spelling mistakes
...
Found by Lintian https://lintian.debian.org/
2016-02-19 01:48:10 +00:00
05e431d5b5
Merge pull request #3645 from lioncash/dxmem
...
D3D12: Get rid of most explicit delete and new usages
2016-02-16 22:54:04 -05:00
96e48c3c9f
Merge pull request #3644 from lioncash/shadercache
...
ShaderCache: Minor changes
2016-02-16 22:52:39 -05:00
6fe3a3004d
Rename Direct3D to Direct3D 11
2016-02-16 22:43:21 -05:00
6b08194728
D3D12: Get rid of safe deletion macros
...
Anything these macros provided can be obsoleted by using
the correct standard library types.
2016-02-16 02:09:06 -05:00
626fcf4c15
D3DStreamBuffer: Use size_t within the class interface
...
A few StreamBuffer instances take arguments that are actually size_t,
and this will cause truncation warnings during argument forwarding
with make_unique.
2016-02-16 02:08:52 -05:00
932dd14418
NativeVertexFormat: Add missing override specifier
2016-02-15 23:41:20 -05:00
69c82f32ff
NativeVertexFormat: Use in-class initialization
2016-02-15 23:40:34 -05:00
6c0db9fe3c
ShaderCache: Remove unnecessary template type specifications
...
These are already inferred through the passed in arguments.
2016-02-15 23:32:30 -05:00
53fe5a04ec
ShaderCache: Remove unnecessary null checks
...
We already bail out if the shader compilation fails.
Also, there would have already been a nullptr dereference in
InsertByteCode prior to reaching this point.
2016-02-15 23:29:30 -05:00
a22f2e1144
D3DBase: Fix missing return statement
2016-02-15 21:15:43 -05:00
8cc686b360
D3D12: Initial commit for D3D12 backend implementation.
2016-02-15 09:48:25 -08:00
bb4d636f34
Copy all layers of textures with CopyRectangleFromTexture
2016-02-14 21:17:06 +01:00
99555a35ca
For partial texture updates check the dimensions of the efb copy and the target texture, not just the binary size.
...
This should get Donkey Kong Country Returns characters to be as broken as they should be. They will be fixed in a later pr.
Expected result is:
efbtex: characters are always flickering or invisible, no matter what scaling or IR setting
efb2ram: characters are always working properly at 1xIR, no matter what scaling or IR setting
2016-02-14 17:13:51 +01:00
1df1ba55bb
VideoCommon: Convert some DataReader includes into forward declarations
...
Gets rid of some indirect inclusions in cpp files.
Also this will reduce the amount of rebuilt files if
changes occur in the DataReader header.
2016-01-31 15:19:20 -05:00
e1f21602fd
Merge pull request #3426 from Sonicadvance1/ES_fix_framedump
...
Add support for framedumping to OpenGL ES.
2016-01-28 18:24:32 -05:00
5ebd1e215b
Fifo: Make g_bSkipCurrentFrame a TU-local variable
...
This is only ever queried, making it a global isn't necessary.
2016-01-25 05:23:14 -05:00
e187c55bdd
OpcodeDecoder: Add namespace
2016-01-24 01:31:36 -05:00
be1a9e4231
Merge pull request #3518 from Sonicadvance1/blacklist_sandy
...
Blacklist Sandy Bridge on mesa from using geometry shaders.
2016-01-20 19:32:56 +01:00
3dda36bc5b
Blacklist Sandy Bridge on mesa from using geometry shaders.
2016-01-20 12:13:21 -06:00
24c228c6e9
Merge pull request #3523 from lioncash/video
...
VideoCommon: Header cleanup
2016-01-18 02:24:50 +01:00
d9fec92628
VideoCommon: Header cleanup
...
Also remedies places where the video backends and core rely on things
being indirectly included.
2016-01-17 20:11:45 -05:00
edebadc093
PixelShaderGen: Use bitwise AND for wrapping indirect texture coordinates
...
(x % y) is not defined in GLSL when sign(x) != sign(y).
This also has the added benefit of behaving the same as sampler wrapping modes, in regards to negative inputs.
2016-01-15 19:46:38 +10:00
48b60649af
Merge pull request #3495 from Armada651/d3d-float
...
D3D: Use a 32-bit floating point depth buffer.
2016-01-14 00:39:23 +01:00
5f244abf28
Fifo: Create a "Fifo" namespace.
2016-01-12 23:28:26 +01:00
0c92603fd5
Merge VideoBackendHardware into VideoBackend.
...
And rename it to VideoBackendBase because of conflicts within the backends itself.
2016-01-12 23:18:58 +01:00
8158d291aa
D3D: Use the full depth range for Z pokes.
2016-01-11 22:27:41 +01:00
129975233f
D3D: Use a 32-bit floating point depth buffer.
2016-01-11 22:27:40 +01:00
5a549ef663
[Android] Add support for rotation and minimizing the application
2016-01-10 13:00:32 -06:00
e7fbd1fd50
Merge pull request #3439 from Armada651/depth-range
...
Render: Clamp the z range to the full range.
2016-01-10 19:09:57 +01:00
b4eb5d8e3f
Disable geometry shaders on mesa AMD/ATI drivers.
...
Causes misrenderings in games that uses them.
2016-01-09 15:09:37 -06:00
98ea1f773a
VideoSW: fix some warnings
2016-01-09 10:38:07 +01:00
3f15aa4b57
Add support for framedumping to OpenGL ES.
2016-01-09 00:21:20 -06:00
bf1c53a6e8
Merge pull request #3451 from RisingFog/libav
...
Use ffmpeg for Windows Video Dumping instead of VFW
2016-01-09 01:01:05 +01:00
c34fb3edf0
Use ffmpeg for Windows Video Dumping instead of VFW
2016-01-07 18:37:58 -05:00
db551c55a2
FrameBufferManager: Fix typo in stereoscopic MSAA shader.
2016-01-07 20:05:12 +01:00
efbe5bc4b6
VideoSW: Use more VideoCommon
...
Now we require lots of empty functions, but this removes by far more duplicated code.
2016-01-06 22:10:29 +01:00
7fcb5a803b
Merge pull request #3359 from degasus/ini
...
VideoConfig: Use "GFX.ini" for both D3D and OGL.
2016-01-06 16:02:23 -05:00
05fdf0398b
Merge pull request #3313 from degasus/videosw
...
VideoSW: Clear Vertex data before usage
2016-01-06 21:56:02 +01:00
ad1f7576ad
VideoConfig: Use "GFX.ini" for both D3D and OGL.
...
They share the same format, so there is no need to separate their configs.
2016-01-06 21:43:11 +01:00
0a42a0ab1b
Merge pull request #3428 from Sonicadvance1/proper_glextensions
...
Make GLExtensions no longer require slghtly modified GL headers
2016-01-06 15:24:47 -05:00
0509292f86
Merge pull request #3431 from stenzek/shadercache
...
ShaderGen: Remove virtual methods and string from ShaderGeneratorInterface.
2016-01-04 19:11:14 -05:00
ca7160f714
Merge pull request #3434 from lioncash/enum
...
OnScreenDisplay: Make CallbackType an enum class
2016-01-04 13:47:22 +01:00
3045e08daf
Merge pull request #3430 from lioncash/compare
...
ProgramShaderCache: Simplify SHADERUID comparison operators
2016-01-04 13:42:39 +01:00
1bcfae5fd7
OGL: Correct unique_ptr types
...
By default unique_ptr will call delete on the given type if an array
qualifier isn't present, not delete[]. It's important to explicitly
specify an array is being handled.
2016-01-03 16:00:16 -05:00
8c3108b354
Render: Clamp the z range to the full range.
2016-01-03 15:39:34 +01:00
01f99a04a2
VideoBackend: Get rid of a boolean global
...
Also gets rid of global headers
2016-01-02 18:03:28 -05:00
edda018d54
OnScreenDisplay: Make CallbackType an enum class
2016-01-02 14:57:55 -05:00
37525f3fcf
Make GLExtensions no longer require slghtly modified GL headers.
...
In fact, removes the need for external headers at all.
2016-01-02 10:34:13 -06:00
617f9d9532
ShaderGen: Remove virtual methods from ShaderGeneratorInterface, move string buffer to ShaderCode
...
This fixes the crashes occuring at startup with a non-empty shader cache.
Because LinearDiskCache reads/writes to the storage of ShaderUid, ShaderUid must be trivially copyable.
Additionally, adds a static assert to LinearDiskCache to ensure this doesn't happen in the future.
The initialization of ShaderUid data has been moved to the code generation functions, so the above condition holds true.
2016-01-02 17:35:06 +10:00
6093d1f72a
ProgramShaderCache: Simplify SHADERUID comparison operators
2016-01-01 22:28:42 -05:00
b4e9bbb551
Merge pull request #3336 from Sonicadvance1/improve_glextensions
...
[GLExtensions] Improve the extension loader.
2016-01-01 13:01:51 -05:00
330329254c
Merge pull request #3361 from stenzek/d3d-vectored-efb-pokes
...
D3D: Implement vectored efb pokes
2015-12-30 15:27:24 +01:00
d8e5d8659e
TextureCache, fix an incorrect assert.
2015-12-29 14:25:31 +13:00
5d63a08a50
VideoSW: Clear Vertex data before usage
...
This must have no effect, everything else is usage of uninitialized memory.
2015-12-28 20:37:25 +01:00
aabcd441d9
Merge pull request #3381 from Armada651/revert-3076
...
Revert "Merge pull request #3076 from void-ghost/stereo3d_presets"
2015-12-28 10:18:32 +01:00
281860eafa
Merge pull request #3400 from lioncash/shadergen
...
ShaderGen: Get rid of static buffers
2015-12-28 10:09:11 +01:00
5cb047f449
D3D: Fix compilation error on windows
2015-12-28 15:50:01 +10:00
294bb75316
Merge pull request #3295 from stenzek/d3d-xfb-msaa
...
D3D: Fix multiple issues relating to MSAA
2015-12-28 01:13:42 +01:00
8ce3a4aa70
ShaderGeneration: Get rid of static buffers
2015-12-26 17:01:54 -05:00
bed102ae89
Revert "ShaderGen: Toggle value of uninitialized color."
2015-12-27 02:28:29 +13:00
12ef4c8ae0
OGL: Fix for black framebuffer when resolution/msaa mode changes
2015-12-23 23:29:32 +10:00
4d48a7abfc
D3D: Fix crash on startup/resize
2015-12-23 23:07:31 +10:00
8371c428cd
VertexLoaderBase: Get rid of explicit delete and new
2015-12-22 20:09:54 -05:00
da0e647346
Render: Get rid of explicit new and delete
2015-12-22 19:10:05 -05:00
8bda12bcfd
Revert "Merge pull request #3076 from void-ghost/stereo3d_presets"
...
This reverts commit 81414b4fa2b926061f64
2015-12-23 00:35:19 +01:00
e422af9cce
FramebufferManager: Get rid of raw new and delete
2015-12-22 18:06:05 -05:00
f448c6e291
FramebufferManagerBase: Get rid of explicit delete and new
2015-12-21 15:57:48 -05:00
d20ba76ab3
StreamBuffer: Make factory function return a std::unique_ptr
2015-12-21 10:21:38 -05:00
ec71452706
StreamBuffer: Correct function casing
2015-12-21 10:09:03 -05:00
1eea95a5be
StreamBuffer: Use std::array for fences
2015-12-21 10:07:56 -05:00
7b69fec8e7
StreamBuffer: Remove unnecessary inline specifiers
...
Methods defined directly in class bodies are inline by default
2015-12-21 10:04:14 -05:00
f295182833
VideoBackends: Simplify initialization and deinitialization of resources
...
Approximately three or four times now, the issue of pointers being
in an inconsistent state been an issue in the video backend renderers
with regards to tripping up other developers.
Global (ugh) resources are put into a unique_ptr and will always have a
well-defined state of being - null or not null
2015-12-20 22:40:37 -05:00
50b9ab4541
Set g_vertex_manager to nullptr on DX11 backend shutdown.. OGL backend already does this
2015-12-20 17:02:36 -08:00
a61fc372bb
VideoCommon: Change PokeEFB to take a pointer rather than a vector
...
This saves allocating a vector for the pass-through path.
2015-12-20 14:42:14 +10:00
7b628c99ec
D3D: Implement vectored efb pokes, increase util vertex buffer size to 64KiB
2015-12-20 00:31:58 +10:00
5e9ab28ed1
VideoSW: Clear normal vertex data.
...
This data might not be initialized but used for lighting.
This matches our ShaderGen usage in VertexShaderGen.cpp:166.
2015-12-19 10:51:42 +01:00
de21da5fb2
Merge pull request #3315 from degasus/test
...
ShaderGen: Toggle value of uninitialized color.
2015-12-18 14:21:37 +01:00
ebe3c49c5f
Merge pull request #3332 from degasus/master
...
MSAA: Store samples in ini files.
2015-12-19 01:37:10 +13:00
e15b6e1a37
Merge pull request #3162 from lioncash/rast
...
Software: Minor changes to Rasterizer
2015-12-15 18:22:42 +01:00
e26d9f7c35
MSAA: Store samples in ini files.
2015-12-15 09:41:01 +01:00
78dda1cf79
[OGL] Update extension checks in Render.
...
This was relying on behaviour that GLExtensions was adding fake extensions to the supported list with ES.
This no longer happens so it needed to be changed.
2015-12-13 11:39:45 -06:00
5dcd3cd4fd
D3D: Fix crash when taking screenshot with crop enabled
...
This was due to specifying negative source coordinates for the texture copy, which must lie within the bounds of the source and destination textures.
The behavior now is to clamp the copy region to [0 <= size <= backbuffer size], resulting in a copy region that can be smaller than the backbuffer, but never larger.
2015-12-09 02:38:24 +10:00
63264ac23f
D3D: Fix EFB depth buffer copies, filtering on scaled EFB copies when MSAA is enabled, real XFB filtering
...
Since ResolveSubresource cannot be used with depth textures (and throws an error with the debug layer enabled), use a shader which selects the minimum depth value from all samples.
Changes the sampler by XFBEncoder to use a linear filter, rather than point, to match GL behavior.
2015-12-08 20:29:21 +10:00
f511e539c2
VideoSW: Use Zero for undefined colors.
2015-12-06 12:39:18 +01:00
7762d68c4b
Rasterizer: Mark some references as const
2015-12-06 02:51:36 -05:00
0608ed5130
Rasterizer: Specify internal linkage on Draw
...
It's not exposed in the header.
2015-12-06 02:51:34 -05:00
a0924b5e1b
Rasterizer: Convert BLOCK_SIZE into a constant variable
2015-12-06 02:51:33 -05:00
2793785e0c
Rasterizer: Get rid of a clamp macro
2015-12-06 02:51:28 -05:00
9b921c2e7c
Rasterizer: Get rid of a trivial pointer cast
2015-12-06 02:44:06 -05:00
d28c9ae354
VideoSW: Wipe output vertices
...
They shall be overwritten afterwards.
2015-12-02 21:37:12 +01:00
21b708106c
Make sure not to use a GL texture buffer past the max size.
...
The spec says that vendors can set the max texture size to be 65KB and we want 1MB.
Check the maximum supported and drop to the max if it is less than 1MB
2015-11-30 01:18:03 -06:00
5e803c3db3
D3D: Fix EFB->XFB copies incorrectly scaling, match GL behavior
2015-11-28 20:04:36 +10:00
fc00598785
NativeVertexFormat: Inline Initialize in contructor
...
They were only called at once, so no need to seperate them.
This also removes the only dereference of the NativeVertexFormat in VideoCommon, so backends may just return nullptr.
2015-11-24 22:48:49 +01:00
df799dd124
VideoCommon: Create default implementation for state setters
...
It's fine to pull those within the backends, so there is no need to enforce them to implement this interface.
2015-11-24 22:39:10 +01:00
d1b132731d
D3D: Remove redundant cast, move pitch calculation to caller
2015-11-24 21:54:19 +10:00
6be4608a0d
D3D: Fix crash on some drivers with small textures
2015-11-24 21:15:19 +10:00
d27dcdba48
We shouldn't be trying to enable the SSBO extension in ES.
2015-11-23 14:47:43 -06:00
ed5e3c054e
Enable Anisotropic filtering in ES.
...
This adds a check to make sure the vendor supports anisotropic filtering.
Pretty much all vendors support this, even the mobile ones.
2015-11-19 02:00:43 -06:00
f172cda50f
Merge pull request #3191 from lioncash/rekt
...
MathUtil: Minor changes to Rectangle
2015-11-18 10:40:54 +01:00
087ba5268a
TextureCache: Rewrite EFB Copy control flow
2015-11-15 12:02:41 +01:00
dcdf8fd3ce
TextureCache: Split efb2ram from efb2tex
2015-11-15 11:59:52 +01:00
d7d8704353
D3D-TextureEncoder: Remove TCache::Entry usage
2015-11-15 11:59:52 +01:00
71b22702a1
OGL-TextureConverter: Keep care about the global state ifself
2015-11-15 11:59:52 +01:00
495902787c
OGL: Remove TCache::Entry usage in TextureConverter
2015-11-15 11:59:52 +01:00
81d9cce70c
VideoCommon: rename TextureCache to TextureCacheBase
2015-11-06 15:43:58 +01:00
51c984dde3
Remove the "Show EFB Copy Regions" debug option.
...
It was only implemented in OpenGL, though the option was visible in both
backends, leading to memory leaks if you enabled it in DirectX.
And it wasn't particularly useful as a debug feature as it only showed
where in the EFB the copies were taken from, not what format it was, or
what the copy was used for, or what content was in the EFB at that point
in time.
Also, it stretched the copy regions relative to the window, so the
on-screen regions don't even line up with the window unless the game used
the full EFB (some pal games) and you game image stretched to the full
window.
2015-11-05 18:15:46 +13:00
05b06b7a21
Merge pull request #3227 from Tilka/sizeof
...
OGL: don't hardcode buffer sizes
2015-11-04 14:35:23 +13:00
39313152ba
OGL: use StringFromFormat where appropriate
2015-11-04 01:56:02 +01:00
e161e714c7
Merge pull request #3226 from Tilka/shadergen
...
VideoCommon: return code/uid from shader gens
2015-11-04 13:42:49 +13:00
bc38892db7
DriverDetails: remove BUG_BROKENINFOLOG leftovers
...
It was removed in 9618738278
2015-11-03 18:50:44 +01:00
71d1eb3c31
VideoCommon: return code/uid from shader gens
...
rather than passing in non-const references
2015-11-03 14:40:23 +01:00
c52c73f762
VideoCommon: VertexManager -> VertexManagerBase
...
It may be a bit weird to see calls to static functions in
VertexManagerBase now, but at least it's easier to see what's going on.
2015-11-02 11:53:54 +01:00
983978ee66
VideoCommon: flush vertex manager if components change
2015-11-01 22:39:31 +01:00
7066689131
ShaderCaches: remove unneeded typedefs
2015-10-29 14:43:05 +01:00
f9512ece77
OGL/ProgramShaderCache: small cleanup
...
Drop an unused function and privatize the cash, er, I mean cache.
2015-10-29 13:51:25 +01:00
c28e3affc5
TextureCacheBase: Change CacheLinesPerRow to BytesPerRow
2015-10-22 08:14:43 -04:00
10c1fd7f38
MathUtil: Make Rectangle constructors and equality operator constexpr
2015-10-20 20:30:36 -04:00
9ee610830c
Make sure FORCE_EARLY_Z is defined for GLES
2015-10-18 02:37:14 +13:00
e7b2a22225
Support Conservative Depth as a fallback for EarlyZ
...
Allows Mesa based drivers to support ZCompLoc
2015-10-18 01:46:54 +13:00
4d3d947efc
Merge pull request #3157 from degasus/videosw3
...
VideoSW: Wipe alpha on bypass EFB
2015-10-17 12:02:55 +02:00
d85344bd58
Merge pull request #3155 from degasus/videosw
...
VideoSW: Split up OGL window handling
2015-10-17 04:56:44 +02:00
b5b304cff2
VertexShaderManager: Get rid of float pointer casts
2015-10-15 23:34:54 -04:00
b69bff0690
VideoSW: Use OpenGL Core context
2015-10-14 00:13:54 +02:00
61c3a0d9e4
VideoSW: Split up OGL window handling
...
This removes OSD support for video software, but it was already broken before.
This commit does not try to fix coding style issues, the rewrite of this presentation API is splitted up.
2015-10-14 00:13:54 +02:00
b0bbe52cc9
Merge pull request #3164 from phire/samplerArrays
...
PixelShaderGen: Use arrays of texture samplers.
2015-10-12 18:44:14 +02:00
9f8981c7c0
VertexLoaderUtils: remove simple wrapper functions
2015-10-11 23:40:50 +02:00
645e4cbbee
PixelShaderGen: Use arrays of texture samplers.
2015-10-12 05:06:39 +13:00
a7b6ae8f2c
Merge pull request #3160 from Tilka/style
...
Misc. style fixes
2015-10-11 15:36:06 +02:00
99228633c3
OGL: simplify AA modes initialization
2015-10-10 22:51:31 +02:00
0f1b287402
Misc. style fixes
2015-10-10 17:44:42 +02:00
d4e447555e
VideoSW: Wipe alpha on bypass EFB
...
Alpha must not be displayed.
2015-10-10 11:45:39 +02:00
81414b4fa2
Merge pull request #3076 from void-ghost/stereo3d_presets
...
Stereo3d presets
2015-10-03 18:10:23 -07:00
5464e698fc
Merge pull request #3102 from rohit-n/build-pch
...
Fix building with PCH disabled.
2015-10-03 13:30:51 -04:00
58d893e56f
Merge pull request #3075 from waddlesplash/no-regexp
...
FileSearch: Don't use RegExes, just do string comparisons.
2015-10-02 04:00:23 +13:00
696d6eae09
Merge pull request #3108 from lioncash/cstyle-array
...
ChunkFile: Provide additional helpers for C-style arrays
2015-10-01 01:55:54 +02:00
a10be26972
Tev: Don't savestate Zero16
...
It's an array of zeroes. There's no need.
2015-09-30 19:45:50 -04:00
c6678687b0
ChunkFile: Provide additional helpers for C-style arrays
...
Gets rid of magic numbers in cases where the array size is known at compile time.
This is also useful for future entries that are stack allocated arrays as these
functions prevent incorrect sizes being provided.
2015-09-30 19:45:46 -04:00
d6ff75d71d
OGL: Remove unnecesary FPSCounter include from Render.cpp
2015-09-29 10:01:38 -04:00
3b75f45cf6
Fix building with PCH disabled.
2015-09-28 11:51:08 -05:00
06c6f60f5b
OGL: Use SplitPath() instead of std::regex.
2015-09-27 13:26:19 -04:00
5643fe5d1f
FileSearch: Don't use RegExs, just do string comparisons.
...
Nothing used the RegEx feature of FileSearch, and GCC < 4.9
doesn't support C++11 RegEx properly, so get rid of it.
2015-09-27 13:25:51 -04:00
8ea9b07b59
Merge pull request #3093 from lioncash/header_shuffle
...
Common: Trim Common.h
2015-09-27 03:18:03 +02:00
cc036ca86c
Common: Remove other Common prefixed headers from Common.h
2015-09-26 18:51:58 -04:00
1d42db2439
Common: Move NonCopyable to its own header
2015-09-26 18:50:35 -04:00
be667e7de8
Merge pull request #3035 from aserna3/SSAAImprovements
...
Improved OGL and D3D's AA options in UI
2015-09-26 09:27:39 -04:00
df189c3ea3
Improved D3D and OGL AA option UI
...
Removed Quality Levels from D3D AA options
Dropdown text now shows whether you're applying MSAA or SSAA
Added a description for SSAA
Moved SSAA checkbox
Cleaned up AA in backends slightly. Supported modes is now a list of ints.
2015-09-25 09:05:18 -07:00
07e4b4f7c4
VideoBackend: Video config filename is now exposed in VideoBackends.
...
It reduces redundancy. Needed make possible to save current video config.
2015-09-22 09:47:19 +03:00
c9836ff592
EGL: Don't depend on VideoCommon or Core
2015-09-22 00:36:48 +12:00
93f6563789
WGL: Don't depend on Core/VideoCommon
2015-09-22 00:36:45 +12:00
95f3c956a8
Move GL interface code out of the OpenGL video backend.
2015-09-22 00:36:45 +12:00
be16901ae1
VideoSW: Don't raise a PanicAlert because of indices
...
It's not panic, it may just render wrong. And this case seems to happen often.
2015-09-20 13:13:47 +02:00
c976e14277
GLInterface: Fix VideoSW on linux + OSX (v2)
...
Our Video Software backend isn't OpenGL Core compatible, so we need a flag to alloc a compatible one.
v2: Fix AGL profile selection.
2015-09-19 13:22:55 +02:00
a7e9a154a5
Revert "GLInterface: Fix VideoSW on linux + OSX"
2015-09-18 13:40:09 +02:00
baf09c3af6
VideoSW: Remove unused function
2015-09-17 19:44:44 +02:00
e4dfb2f6bf
Merge pull request #3054 from degasus/master
...
GLInterface: Fix VideoSW on linux + OSX
2015-09-17 19:21:16 +02:00
3b5b80bf3c
VideoSW: Drop SW bbox code
...
The hardware backends don't use this shared code any more, and it's not needed for video sw either. So this was just dead code.
2015-09-17 18:21:37 +02:00
e3e0399af2
VideoSW: Drop HwRasterizer
...
I don't remember it being working, and nobody cares about performance of videosw.
2015-09-17 18:21:37 +02:00
48279c1840
GLInterface: Fix VideoSW on linux + OSX
...
Our Video Software backend isn't OpenGL Core compatible, so we need a flag to alloc a compatible one.
2015-09-17 17:52:56 +02:00
a94300dd86
Rasterizer: Use multiplication instead of shifts in DrawTriangleFrontFace
...
The left-hand-side is negative at some point which is considered undefined by the standard.
2015-09-17 01:46:29 -04:00
deeb1d8370
Remove segfault from DX11 backend.
...
Instead of blindly using the expected width, clamp it to the stride of the
buffer which dx11 returns. This prevents use from reading invalid memory
at the end of textures.
This doesn't solve the base issue of what to do when a game tries to copy
from outside the efb. On real hardware it returns random noise (biased
to all ones)
2015-09-17 02:22:00 +12:00
f121d7a8cd
Merge pull request #3026 from lioncash/constexpr
...
MathUtil: Make Clamp and IsPow2 constexpr functions.
2015-09-12 02:28:38 -04:00
5556781946
Merge pull request #3018 from Armada651/ogl-tab
...
OGL: Invert Top-and-Bottom mode.
2015-09-12 02:21:19 -04:00
17ff069d4a
Merge pull request #3002 from degasus/master
...
OGL: reimplement SSAA based on ARB_gpu_shader5
2015-09-12 02:14:45 -04:00
b9e360df7b
MathUtil: Convert Clamp into a constexpr function
2015-09-12 01:18:28 -04:00
99c08c89bb
OGL: Invert Top-and-Bottom mode.
2015-09-10 22:22:26 +02:00
3014feedc8
Merge pull request #3012 from degasus/destAlpha
...
VideoCommon: Drop "Disable destAlpha" hack
2015-09-10 13:56:43 -04:00
de9310fe70
Split OpenGL errors into a separate logtype from Video errors.
...
Allows them to be enabled/disabled separately.
2015-09-10 18:38:45 +12:00
74b20e627c
VideoCommon: Drop "Disable destAlpha" hack
...
This option has no use any more, neither performance nor driver workaround.
2015-09-09 21:31:54 +02:00
a95adba39b
Drop DEBUG_SEVERITY_NOTIFICATION messages down to DEBUG_LOG
2015-09-09 12:22:52 +12:00
664beea538
OGL: reimplement SSAA based on ARB_gpu_shader5
...
So i965 shall support it again.
2015-09-07 22:21:11 +02:00
bfb544e1fb
[GLES] Enable bounding box support.
2015-09-07 12:07:27 -05:00
1f800b80dd
Merge pull request #2960 from phire/improve_efb2tex
...
Make efb2tex behave much more like efb2ram.
2015-09-07 14:12:03 +12:00
1c0366993a
VideoBackends: Reimplement SSAA, now for D3D + OGL
2015-09-06 19:40:00 +02:00
ee649c6d9f
Make efb2tex behave more like efb2ram.
...
Instead of having special case code for efb2tex that ignores hashes,
the only diffence between efb2tex and efb2ram now is that efb2tex
writes zeros to the memory instead of actual texture data.
Though keep in mind, all efb2tex copies will have hashes of zero as
their hash.
2015-09-07 02:32:01 +12:00
c08a83a5aa
Merge pull request #2957 from phire/unify_efbcopy
...
Cleanup and unify efb copy implemtations into VideoCommon
2015-09-07 00:10:42 +12:00
137856bd00
Fix palette conversions for 4 bit efb copies.
...
Fixes purple shadow in THPS4 and many other things.
2015-09-06 21:16:52 +12:00
b9be3245e1
Move common EFB copy code into VideoCommon
...
Addded a few duplicated depth copy texture formats to the enum
in TextureDecoder.h. These texture formats were already implemented
in TextureCacheBase and the ogl/dx11 texture cache implementations.
2015-09-06 21:16:51 +12:00
96e42dff52
Merge pull request #2977 from lioncash/unused
...
General: Remove unimplemented function prototypes
2015-09-05 22:20:47 -04:00
633be0387d
General: Remove unimplemented function prototypes
2015-09-05 22:01:07 -04:00
52948bb3ef
Cleanup and unify handling of efb copy stride.
2015-09-05 23:37:24 +12:00
a8c8f52f20
OGL: remove unused variable
2015-09-05 12:40:14 +02:00
7650117c26
Properly support MSAA and SSAA as separate features(+GLES)
...
SSAA relies on MSAA being active to work. We only supports 4x SSAA while in fact you can enable SSAA at any MSAA level.
I even managed to run 64xMSAA + SSAA on my Quadro which made some pretty sleek looking games. They were very cinematic though.
With this, it properly fixes up SSAA and MSAA support in GLES as well. Before they were broken when stereo rendering was enabled.
Now in GLES they can properly support MSAA and also stereo rendering with MSAA enabled(with proper extensions).
2015-09-05 05:23:29 -05:00
9618738278
Remove all of our workarounds for Qualcomm devices we don't support anymore.
2015-09-04 23:45:35 -05:00
e7660325b4
Merge pull request #2967 from Sonicadvance1/GLES_blend_func_extended
...
Support EXT_blend_func_extended in GLES.
2015-09-05 03:43:28 +02:00
5fa4c8d930
Support EXT_blend_func_extended in GLES.
...
This lets us get dual source blending on GLES targets.
2015-09-04 20:25:59 -05:00
6cf7048423
Implement ClearCurrent on the EGL GLInterface
...
This fixes an error on GLInterface shutdown when using EGL.
2015-09-04 19:58:58 -05:00
102a2a975d
BitField: Enable ifdef'd out code for Windows
2015-09-03 22:06:15 -04:00
aa7208e270
[windows] Update projects to vs2015.
2015-09-03 04:23:01 -07:00
7a35f9285b
[GLES] Support texture_buffer for palette texture conversion.
...
OpenGL ES 3.2 adds this feature to core
It was available to GLES 3.1 as GL_{EXT, OES}_texture_buffer as well.
For the non-Nvidia vendors that implemented this is:
- Qualcomm's Adreno 4xx
- IMGTec's PowerVR Rogue
2015-09-01 05:41:03 -05:00
a16669231a
Merge pull request #2917 from Sonicadvance1/android_fix_sgs6
...
[Android] Workaround Mali driver issue on the Samsung Galaxy S6.
2015-08-29 08:56:32 +02:00
6004ecc521
Merge pull request #2920 from rohit-n/build-pch
...
Fix building with PCH disabled.
2015-08-28 23:08:24 +02:00
6252d2d71a
Fix building with PCH disabled.
2015-08-28 14:13:28 -05:00
e787501528
Vec3: Simplify operator== code
2015-08-28 14:46:40 -04:00
bb27f80a65
Vec3: Remove a memset call on the this pointer
2015-08-28 14:10:07 -04:00
01db003779
[Android] Workaround Mali driver issue on the Samsung Galaxy S6.
...
Samsung updated the video drivers on the SGS6 which introduced a bug when disabling vsync.
Both the driver versions are r5p0, but the md5sums of the blob differ.
To work around the issue, make sure to never disable vsync by calling eglSwapInterval.
We can't actually determine the driver version on Android yet.
So until the driver version lands that displays the driver version string in the GL_VERSION string
we will need to keep this workaround enabled at all times, which is a bit annoying.
Current mali drivers return the video driver version in one of the EGL strings you can query.
The issue with that is that Android eats all of those strings, so we can't query it.
2015-08-28 09:02:46 -05:00
447b1b09e3
Support OpenGL ES 3.2.
...
OpenGL ES 3.2 adds a few things we care about supporting in core. In particular:
- GL_{ARB,EXT,OES}_draw_elements_base_vertex
- KHR_Debug
- Sample Shading
- GL_{ARB,EXT,OES,NV}_copy_image
- Geometry shaders
- Geometry shader instancing (If they support GL_{EXT,OES}_geometry_point_size)
Nvidia was the first to release an OpenGL ES 3.2 driver which I uesd to test this on.
This also enables GS Instancing on GLES 3.1 hardware if it supports all of the required extensions.
2015-08-26 17:57:51 -05:00
b4e4a4cef4
Disable OpenGL ES 3.1 on all Qualcomm Adreno devices.
...
Their new driver that supports GLES3.1 + AEP has issues with it.
At the very least they don't implement all of the geometry shader features fully which causes shader linker issues when we attempt to use them.
I don't have a device so I can't fully test, so until I do I'm going to blanket disable the whole thing.
2015-08-22 09:12:19 -05:00
3f1055de94
Fix a memory leak in the EGL GLInterface.
2015-08-18 08:26:45 -05:00
7e266b080f
TextureCache: Remove redundant floor().
2015-08-15 15:30:50 +02:00
b01ca1794a
Revert "VideoCommon: Clamp integer conversions."
...
This reverts commit 0f2c72f0f8
2015-08-15 13:50:43 +02:00
c80e3089c8
[GLES] Fix real XFB.
...
GLES doesn't support the BGRA texture format type, just use RGBA.
2015-08-12 17:32:05 -05:00
ca250f6b71
Specified the type of AA in OGL AA settings
2015-08-09 09:59:20 -07:00
d3cf4034de
DriverDetails: Disable GL_ARB_copy_image on mesa.
2015-08-06 19:41:36 +02:00
e2f42f8fd0
OGL: Move copy_image variable into backend.
2015-08-06 19:41:36 +02:00
739ede2242
Fix code to comply with coding style
2015-07-31 20:00:36 -04:00
0faba3b018
Changed the aspect ratio settings to account for NTSC/PAL pixel aspect ratios and VI scaling.
2015-07-31 19:58:02 -04:00
7ee0e75633
Remove unnecessary virtual keywords
2015-07-30 10:33:08 -04:00
9d055ba5f2
Video: Trying to fix D3D/XFB disabled regression
2015-07-26 00:59:00 +08:00
efd250494d
Video: stride in bytes rather than pixels
2015-07-25 02:48:56 +08:00
c43ae67b3b
RealXFB sizes don't get scaled by IR
...
When calculating the size of the undisplayed margin in the case where
fbWidth != fbStride for RealXFB for displaying in the output window,
we do not scale by IR - RealXFB is implicitly 1x.
2015-07-25 01:52:13 +08:00
2e28ed3291
Video: respect stride of efb copies to xfb
2015-07-25 01:52:12 +08:00
c81bd32720
Merge pull request #2764 from Sonicadvance1/pvr_workaround3
...
Work around devices that choose to only return the default EGL_RENDERABLE_TYPE
2015-07-22 16:47:11 -05:00
6bcdae616b
Merge pull request #2679 from Tinob/master
...
Implement scaled partial texture updates
2015-07-22 19:04:04 +02:00
c4f0515141
Work around devices that choose to only return the default EGL_RENDERABLE_TYPE
...
The default EGL_RENDERABLE_TYPE is GLES1, so vendors have the ability to choose between returning only the bits requested, or all of the bits
supported in addition to the one requested.
PowerVR chose to take the route where they only return the bits requested, everyone else returns all of the bits supported.
Instead of letting the vendor have control of this, let's incrementally go through each renderable type and make sure it supports everything we want.
This will cover all devices for now, and for the future.
2015-07-22 11:11:23 -05:00
dc46ae0380
Fix an oversight in GLExtensions
...
I only wanted to erase the first character in the string, not the entire thing.
Fixes Qualcomm and PowerVR devices crashing out immediately.
2015-07-20 22:01:23 -05:00
d8cd2c3252
Implement scaled partial texture updates
2015-07-02 08:53:40 -03:00
daa205990f
Use emplace() instead of insert() where applicable for maps.
2015-06-28 19:52:40 -04:00
75a9740ab7
Merge branch 'stable'
2015-06-25 12:24:15 +02:00
8fd5f249fa
Merge pull request #2656 from Armada651/ogl-inv-depth
...
OGL: Allow inverted depth ranges.
2015-06-25 12:06:56 +02:00
0034492151
Add an OSD notification for screenshot saving
2015-06-25 09:23:37 +02:00
30eae0d258
Merge pull request #2657 from lioncash/screenshot
...
Render: Add an OSD notification for screenshot saving
2015-06-25 09:22:26 +02:00
521f6e89c3
Merge pull request #2624 from sigmabeta/android-save-screenshot
...
Android: Save screenshot at end of an emulation session.
2015-06-24 21:39:47 -05:00
67c5ce5d96
Add an OSD notification for screenshot saving
2015-06-24 21:44:38 -04:00
dbfdbf7dbd
D3D: Cosmetics.
...
Merge two cases which should've already been merged.
2015-06-24 23:16:53 +02:00
743296f1c4
OGL: Allow inverted depth ranges.
2015-06-24 22:28:36 +02:00
83ab721939
Fix -Wformat-extra-args warning
2015-06-24 14:44:09 +02:00
8493feb89f
Merge pull request #2602 from mimimi085181/partial-texture-updates2
...
Support partial texture updates via efb copies
2015-06-24 09:22:50 +02:00
a028805626
Android: Save screenshot at end of an emulation session.
2015-06-23 22:22:01 -04:00
c9af7def28
Fix some warnings
2015-06-23 21:11:56 +02:00
21a70903ed
Merge branch 'stable'
2015-06-23 20:16:55 +02:00
0ed6b5623f
Support partial texture updates via efb copies
2015-06-21 14:02:44 +02:00
45aeeee699
Fix aniso filtering on d3d to not set aniso filter when using 1x
2015-06-19 20:55:32 +12:00
7085fcc8d6
Fix FreeBSD build
2015-06-13 21:52:47 -07:00
4042945ee5
Merge branch 'stable'
2015-06-13 01:12:12 +02:00
c375111076
Options: merge SCoreStartupParameter into SConfig
2015-06-12 19:07:45 +02:00
5cce640f48
Anisotropic Filtering option is now correct in D3D
...
Values are saved/loaded as 0,1,2,3,4 but need to be used as 1,2,4,8,16
This was correct for OGL but not D3D
2015-06-10 22:32:46 +12:00
d5788f75a3
Merge pull request #2533 from degasus/syncgpu
...
Fifo: Rewrite SyncGPU
2015-06-09 09:43:26 +02:00
59f273696a
VideoSW: refactor shared lighting attenuation function
...
- Refactored Light Attenuation into inline function in Software Renderer
- Corrected zero length light direction vector to resolve with normal direction (essentially becomes LIGHTDIF_NONE which was what I was after)
- Change the API of this shared function to use points for output variables (degasus)
2015-06-08 23:20:27 +02:00
06d1b8c63a
VideoSW: rewrite lighting attenuation
...
- Fixes remaining lighting issues (Mario Tennis, etc)
- Apply same fixes to Software Renderer
- Corrected zero length light direction vector to resolve with normal direction (essentially becomes LIGHTDIF_NONE which was what I was after)
2015-06-08 23:20:27 +02:00
d31bed8b79
Fifo: Rewrite SyncGpu
...
The new implementation has 3 options:
SyncGpuMaxDistance
SyncGpuMinDistance
SyncGpuOverclock
The MaxDistance controlls how many CPU cycles the CPU is allowed to be in front
of the GPU. Too low values will slow down extremly, too high values are as
unsynchronized and half of the games will crash.
The -MinDistance (negative) set how many cycles the GPU is allowed to be in
front of the CPU. As we are used to emulate an infinitiv fast GPU, this may be
set to any high (negative) number.
The last parameter is to hack a faster (>1.0) or slower(<1.0) GPU. As we don't
emulate GPU timing very well (eg skip the timings of the pixel stage completely),
an overclock factor of ~0.5 is often much more accurate than 1.0
2015-06-08 23:16:24 +02:00
499478bcad
Merge pull request #2550 from Armada651/d3d-pokes
...
D3D: Implement Z pokes.
2015-06-07 23:25:16 -04:00
3f46491255
Fix OpenGL ES shader compilation.
2015-06-07 19:44:44 -05:00
75fef8e26f
D3D: Implement Z pokes.
2015-06-07 15:33:30 +02:00
cfc23560d9
D3D: Set the viewport to the full target size when doing EFB pokes.
2015-06-07 13:32:00 +02:00
026d07e7c9
D3D: Remove obsolete comment.
2015-06-06 23:26:52 +02:00
37dc8661ab
Revert "Revert "OGL: Switch depth buffers to GL_DEPTH_COMPONENT32F format.""
...
This reverts commit 9ef1ca4141
2015-06-06 20:10:23 +02:00
8cc271516d
Revert "Revert "OGL: Change the depth buffer type to GL_FLOAT.""
...
This reverts commit 05d60f4fef
2015-06-06 20:09:22 +02:00
5650b9e970
Revert "OGL: Use floating point arithmetic to scale the depth value."
...
This reverts commit 05f42f94a0
2015-06-06 20:07:49 +02:00
ef1dfa8bcb
VideoBackends: Allow the viewport to use the full depth range.
2015-06-06 03:37:46 +02:00
95a2abc1ce
Use PanicAlertT instead of PanicAlert when appropriate
...
I tried to change messages that contained instructions for users,
while avoiding messages that are so technical that most users
wouldn't understand them even if they were in the right language.
2015-06-04 13:25:06 +02:00
bcd77f9a3a
Merge pull request #2482 from degasus/ogl_poke_z
...
OGL: Rewrite POKE_Z with a draw call
2015-06-03 20:35:34 +02:00
a3b3f0522b
Merge pull request #1556 from comex/project-moration
...
Rudimentary version of Wii IPC determinism. Ported from my old udpnet branch.
2015-06-02 18:38:19 -04:00
84b13de538
OGL: Rewrite POKE_Z with a draw call
...
It's now also merged and it should be faster than the glClear way.
2015-06-02 23:06:41 +02:00
ebf3048494
Fix invalid enums on OpenGLES
2015-06-02 12:13:31 -04:00
aa2576a2c7
Merge pull request #2480 from phire/GamesDoWeirdShit
...
Fix invalid pointer errors in Burnout 2.
2015-05-31 23:26:55 +02:00
7df6982973
Add a dirty flag for arraybases.
...
Only loop through and call getPointers when something has actually
changed.
Worth about 2-4% speedup un SMG over the previous commit.
2015-05-30 04:39:48 +12:00
f57517f1a0
Clean up cached_arraybases. Update VideoSW to new scheme.
...
Move ownership of cached_arraybases from CPMemory to VertexLoaderManager
to better match it usage.
2015-05-30 04:09:27 +12:00
c4fc141ced
OGL: Always use sampler objects.
...
We are used to use the texture parameter for all util draw calls,
but AMD seems to have a bug where they use the sampler parameter
of stage 0 if no sampler is bound to the used stage.
So as workaround (and a bit as nicer code), we now use sampler
objects everywhere.
2015-05-29 14:03:03 +02:00
ac26f8e79f
Pass strings by const reference where possible
2015-05-28 20:54:55 -04:00
a225426510
Rewrite FileSearch and improve ScanDirectoryTree.
...
- FileSearch is now just one function, and it converts the original glob
into a regex on all platforms rather than relying on native Windows
pattern matching on there and a complete hack elsewhere. It now
supports recursion out of the box rather than manually expanding
into a full list of directories in multiple call sites.
- This adds a GCC >= 4.9 dependency due to older versions having
outright broken <regex>. MSVC is fine with it.
- ScanDirectoryTree returns the parent entry rather than filling parts
of it in via reference. The count is now stored in the entry like it
was for subdirectories.
- .glsl file search is now done with DoFileSearch.
- IOCTLV_READ_DIR now uses ScanDirectoryTree directly and sorts the
results after replacements for better determinism.
2015-05-28 19:14:42 -04:00
285ac34bf3
OGL: use GL_TEXTURE* constants
2015-05-27 15:05:49 +02:00
c59bfd2b7f
Fix building with PCH disabled.
2015-05-26 22:44:51 -05:00
ca7801da44
D3D: Invert initial depth buffer clear.
2015-05-26 15:31:36 +02:00
2975e53091
D3D: Depth range inversion.
...
Credits go to Galop1n for designing this technique and to BhaaLseN for cleaning up the commit.
2015-05-26 15:31:31 +02:00
dad5d8e13d
Merge pull request #2357 from degasus/ogl_efb_poke_merge
...
ogl: efb poke merge
2015-05-25 23:26:39 -04:00
69963dc4b0
Merge pull request #2274 from degasus/disable_bbox
...
Disable bbox
2015-05-25 08:46:12 -04:00
30ebb2459e
Set copyright year to when a file was created
2015-05-25 13:22:31 +02:00
cefcb0ace9
Update license headers to GPLv2+
2015-05-25 13:22:31 +02:00
268f52e054
Add missing license headers
2015-05-25 13:11:47 +02:00
6b2a1e57e2
BBox: remove now unreachable SW bbox implementation
2015-05-25 09:33:34 +02:00
e31982474c
OGL: Depth range inversion.
2015-05-22 23:52:22 +02:00
88cc91030e
VertexShaderGen: Use correct depth output when glClipControl is supported.
2015-05-22 23:52:21 +02:00
522e721830
OGL: Add glClipControl support.
2015-05-22 23:52:20 +02:00
ad9dae30a8
Merge pull request #2410 from lioncash/swatomic
...
Software: Convert most volatile variables to atomics
2015-05-22 14:11:16 +02:00
05f42f94a0
OGL: Use floating point arithmetic to scale the depth value.
2015-05-20 14:22:30 +02:00
05d60f4fef
Revert "OGL: Change the depth buffer type to GL_FLOAT."
...
This reverts commit 4b2e04b862
2015-05-20 14:22:29 +02:00
9ef1ca4141
Revert "OGL: Switch depth buffers to GL_DEPTH_COMPONENT32F format."
...
This reverts commit be810eb750
2015-05-20 14:22:28 +02:00
d91d935057
OGL: reimplement poke-color
2015-05-20 11:05:31 +02:00
695a72c24c
Merge pull request #2414 from Armada651/depth-clamp
...
VideoBackends: Clamp depth to uint24 range.
2015-05-19 14:44:34 +02:00
ef78941042
VideoBackends: Clamp depth to uint24 range.
2015-05-18 23:22:28 +02:00
f7151a2a5c
Revert "D3D: Use a 32-bit floating point depth buffer."
...
This reverts commit a224c604a3
2015-05-16 22:16:31 +02:00
26a3eaf959
Software: Convert most volatile variables to atomics
2015-05-14 12:33:19 -04:00
a94e4dd07f
OGL: Join declarations and assignments in Render
2015-05-08 09:29:36 -04:00
eeb0f0b7c4
OGL: Get rid of some explicit deletes in Render
2015-05-08 09:28:29 -04:00
a224c604a3
D3D: Use a 32-bit floating point depth buffer.
2015-05-08 14:32:22 +02:00
84a5f4abb0
VideoBackends: Use the new divisor when clearing the depth buffer.
2015-05-08 14:32:22 +02:00
1a409a2e16
VideoBackends: Clamp Z peek values.
2015-05-08 14:32:21 +02:00
0f2c72f0f8
VideoCommon: Clamp integer conversions.
2015-05-08 14:32:16 +02:00
b0770e2a0c
VideoBackends: Floor depth values in depth copy shaders.
2015-05-08 14:29:30 +02:00
be810eb750
OGL: Switch depth buffers to GL_DEPTH_COMPONENT32F format.
2015-05-08 14:29:30 +02:00
4b2e04b862
OGL: Change the depth buffer type to GL_FLOAT.
2015-05-08 14:29:29 +02:00
c4f85a38e6
VideoBackends: Use proper floating point depth precision.
2015-05-08 14:29:29 +02:00
268b8fd26f
Merge pull request #2026 from mrgreywater/d3d-debugbreak
...
D3D: More debug information and break on error
2015-05-07 19:29:21 -07:00
24594a7888
PixelShaderCache: Fix MSAA depth copy shader.
2015-05-06 12:43:35 +02:00
7a1252f7e5
VideoBackends: Implement depth copy shaders with integer math.
2015-05-05 00:40:25 +02:00
e0cfd934d2
Merge pull request #2364 from kayru/d3d_texture_bsf
...
D3D: StateManager::Apply no longer iterates through every texture and sampler slot
2015-05-03 21:39:33 +02:00
df5750edfd
D3D: Replaced explicit _BitScanForward with LeastSignificantSetBit
2015-05-03 21:14:29 +02:00
54f4443971
VideoCommon: Implement EFB dumping for both backends.
2015-05-02 13:23:33 +02:00
2b664f5d89
D3D: StateManager::Apply no longer iterates through every texture and sampler slot
...
Now using bit scan through dirty slot masks.
2015-04-29 20:08:00 +02:00
9eb608c9da
Merge pull request #2301 from lioncash/const
...
General: Apply the const specifier where applicable
2015-04-16 23:13:39 -04:00
63393570fb
PerfQueryBase: Move common implementation variables into base class
2015-04-15 19:22:16 -04:00
b0613bb1c8
General: Apply the const specifier where applicable
2015-04-15 02:04:03 -04:00
bdde6b2a7c
D3D: Remove dependency on wxWidgets
...
This hasn't been necessary for ages
2015-04-14 22:27:03 -04:00
b020ae1c5d
Fifo: rewrite sync on idle skipping hack
...
Now it's done without a busy loop
2015-04-06 12:35:35 +02:00
39c41f5c70
Merge pull request #2192 from Tilka/sse2
...
VertexLoaderX64: support SSE2 as a fallback
2015-03-21 12:58:24 +11:00
94e435afbc
Merge pull request #2201 from magumagu/ogl-clamp-origin
...
OpenGL: use ClampUL instead of ClampLL where appropriate.
2015-03-21 12:45:46 +11:00
5a51bc10e5
SWVertexLoader: fix truncated components
2015-03-18 12:09:06 +01:00
629fb8fb49
Merge pull request #2222 from Tilka/fix_warnings
...
Fix warnings
2015-03-16 17:41:46 -07:00
f82afd1b2f
Fix warnings
2015-03-16 19:02:30 +01:00
ad64336137
quiet some warnings which appear on vs2015.
...
quieted warnings include shadowed variable names and integer extensions.
2015-03-15 19:28:47 -07:00
269be03908
OpenGL: use ClampUL instead of ClampLL where appropriate.
2015-03-12 13:24:52 -07:00
Stenzek