NTSC only.
I don't know what the "impact screen" crc hack did since the dump didn't
show any difference so that may need to be updated as well.
Note: I only tested the JP version.
Add support for dss_write.
Enable writing in depth buffer for dss_write,
when depth conversion is active data will be writen in the depth buffer,
if not then use the old method (don't write).
The game still has a bunch of depth and other issues even on gl and it
doesn't play nice with the blur effect as well. Perhaps the hacks can be
changed to work better but for now enable it on native as well.
Fixes ground corrupt textures caused by the hack on the EU version.
US works fine with skip 5 but not 4. Didn't spot any regressions on both
so far. Might need extra testing by users.
Idea is to allow Alpha Stencil to work with Fast Date.
Let Fast Date run for the supported calls since it's more accurate, let
Alpha Stencil take care of the rest.
This might fix some issues where Alpha Stencil caused some issues making
it a bit more accurate.
It fixes a bunch of shadow/transparency issues.
Fast DATE doesn't rely on the gui option and is always on.
Confirmed fixed issues: Persona 3 shadows on d3d11,
Digital Devil Saga Transparency d3d9/11.
Fast accurate date works the same/similar to OpenGL.
Confirmed fixed issues: DBZ BT3 ground shadows, Fifa Street 1 shadows
on all d3d renders as well.
Also this option doesn't cause other transparency issues like the
Alpha Stencil hack.
Note: If Alpha Stencil is enabled Fast Date and Fast Accurate Date will
be disabled.
Note2: Full Accurate Date is not implemented so the code fallbacks to
Fast mode instead.
Commits:
3ab12cef2f584397a3fd
This will probably be the last feature d3d9 gets before getting purged.
Move Enable User Hacks at the top. Otherwise spacing looks weird.
Large Framebuffer should be next to Allow 8 bit textures.
Move Accurate Date and Accurate Blending at the bottom (similar to windows).
Suggested by Gregory.
Change the checkbox to a drop down list Off, Fast, Full.
Off and Full do the same as before, the Fast option is new. Most of the
time users don't actually need full Accurate Date so why not reduce that
cost and use a fast mode instead, plus it can also be used on a gpu with
a limited driver. Also change the default value to Fast instead of Off.
Always enable unscale point and line hack on upscaled resolutions, and
purge the gui option.
It was discussed in the past with Gregoy that it can be enabled without
causing any issues which will be beneficial to getting rid of 1 less
option and fixing a bunch of fmv issues without relying on a gui toggle.
Fix GSVector4i::compare64 function by adjusting the number of iterations
needed to cover the comparison of all the elements of the input arrays,
where the number of bytes to compare is indicated in the size parameter
of the function.
The function is used only in GSdx-TC to compare CLUT arrays.
On one hand this fix closes the recent #2706 and possibly the color
regressions indicated in #2702 (which were both introduced with the new
PaletteMap mechanism, which partially replaced the GSVector4i::update
logic with the bugged GSVector4i::compare64).
On the other hand this might impact long standing wrong texture cache
lookup when palette was involved with 8-bit palette disabled (to be
verified which ones).
Close#2713Fixes#2706Fixes#2715
Fixes right half screen issue on TalesOfLegendia. UI elements of the
screen are properly emulated with depth emulation on gl (possibly fixed
by
1cc696ab31).
Shadows will be glitchy if crc hack level is below partial level.
I'm not even sure if the hack is useful at all anymore since it
introduces issues now.
Issue #2692
The code was never working properly ( tested by @tadanokojin ) so let's
clean up and remove it. If someone actually wishes to maintain it then
they can re add it and update the code to a functional stage.
Cutie Chinese comments, they were removed in commit
21522e71b2
It's better to have google translated comments than nothing, at least we
have something to go on when doing future testing.
Also ghosting and blur crc hacks might need to be updated as they may
not be necessary on native res only.
List: GSC_Tekken5, GSC_TombRaiderUnderWorld, GSC_XE3, GSC_AceCombat4,
GSC_SoTC, GSC_ResidentEvil4.
Note: I left GSC_ValkyrieProfile2 in there because it might need to be
re enabled for dx, someday will look in to it when I'm up for the task.
This pull request is for the pending reorganization of the folder structure on GSdx,
making it better organized and easier to work with.
Also remove unused GSTextureFX.cpp file.
Enabled caching of clut copies with PaletteMap also in the case 8-bit texture is disabled, which is the default (on #2344 the caching of clut copies and palette textures was done only when 8-bit texture was enabled).
Brings moderate speedups ~10% in the most concitated parts of the ZoE2 Anubis benchmark, but may improve performance in all the cases when there are many Source objects created with clut copies to be stored.
The quality of the comments has been improved to better highlight the mechanics of the caching system.
Removed crc id 0x7D4EA48F and mentions of that id and it's duplicates. The id is from a multiloader when packing images, and not an actual crc id from a game(s).
This follows the 4th point of #2310.
The idea was to rework the current palette texture management to improve performances with games that uses multiple palettes for the same data texture.
The new management shows small to none performances improvement in almost every game in terms of FPS, and it lowers the GPU BUS usage by some percentage points in games like Baldur's Gate: Dark Alliance (9% to 7%) which uses many palettes.
The hot topic is that the performances in Zone Of The Enders 2 skyrocketed (2x), because of the fact that the game uses many palettes and a small number of textures to render it's effects.
For more detailed information check the PR #2344
Some users get confused and change the setting to a recommended option.
This can cause some issues when switching different hw render types.
Most of the time users shouldn't change the option and leave it on
Automatic.
Also remove ICO from crc Aggressive tooltip.
Only impacts custom resolution, there used to be a much weaker algorithm
which doens't consider scissor sizes and gives a minor performance boost
in costs of accuracy (which was used when large framebuffer was disabled
in custom resolutions)
I've removed this as the performance tradeoff is rather negligible after
the implementation of #1942 and the older one is no longer necessary.
Also added an extra parameter for considering the horizontal scissor,
I'm not sure where this might be useful so this is disabled in code for
now till I discover a testcase where this helps or run it on random data
ensuring it's working properly.
Also porting this to the general scaling function might help with memory
spikes which are experienced when large framebuffer is enabled.
We can't do a full port because channel shuffle and depth sampling need
to be ported to d3d but at the very least we can do a partial port that
skips the bad draw calls.
This way we can remove all the remaining crc hacks for ICO in GSHwHacks.
This should make things a bit easier for users when picking resolutions.
Native (PS2)
2x Native (~720p)
3x Native (~1080p)
4x Native (~1440p 2K)
5x Native (~1620p 3K)
6x Native (~2160p 4K)
8x Native (~2880p 5K)
Custom (Not Recommended)
Change the code so that some crc hacks on some games that remove
ghosting/blur issues on upscaled resolutions are disabled on native
resolution if crc hack level is below Aggressive state (most of the time).
They aren't needed then so why don't we aim for better accuracy.
Let's keep the file clean and use 1 type of formatting and not a bunch.
It's easier to read this way and looks tidy.
Also correct some commented out code in Texture Sampler.
Hack will no longer be active on Intel or AMD gpus.
Also remove UserHacks_disable_NV_hack. sprite hack
basically does the same thing so it's kinda useless.
Some values were incorrect, now I'm no expert but looking at the code
and behavior seemed a bit wrong compared to gl.
Improves d3d rendering on Sonic Unleashed, the purple screen is gone
matching it with gl visuals.
dfmt is not supported but we can use the variable to select the
frame buffer format and later disable writting to the alpha channel.
MGS3 sees an improvement, and possibly other games as well.
So far didn't spot any regressions.
Commit:
d29e375f72
Only native res is supported currently, but it's still great progress.
Someone needs to port the ScalingFactor to D3D from commit:
6121677aa1
Credits to KrossX for porting the shader.
Add a missing crc id for the US version,
, move the crc to DX level - effect is emulated correctly on OpenGL with
depth,
merge the two Yakuza hacks together and reformat it making it easier to
be read.
Skip 3 also seems to work on Yakuza 2.
Related commit:
7f0f19ee02
Reformat the code a bit, ocd satisfaction.
This prevents the dialog from preserving state after it is closed, which
simplifies the logic slightly for reopening the dialog.
Also remove an unused variable.
Re add point sampler to OpenGL. Fixes graphical issues when
Allow 8-bit textures is enabled on AMD gpus.
Issue: https://forums.pcsx2.net/Thread-GSDX-Hardware-mode-Bug-Report-Allow-8-bit-Texture
Adjust the code to be easier to read, and execute the gl code only on amd - suggested by Gregory.
Remove useless ATI_SUCKS define in tfx shader.It wasn't used anywhere outside of the shader.
Enhance the skipdraw hack by allowing skipdraw to skip a range of draw
calls.
For example: When the broken effects are at frames 90-100, the default
skipdraw always skips 0-100, possibly skipping several functioning
effects as well. By enhancing the skipdraw feature, it is now possible
to skip just frames 90-100.
For the example given above set the first box to 90 and the second box
to 100 to skip frames 90-100.
coauthor:turtleli (Linux GUI + tidy/simplify Windows GUI code)
Decrease spacing between Hardware Settings and Texture Filtering
slightly. It was a bit too much before,
Adjusted spacing to be equal between options, some had incorrect
spacing.
Maybe Accurate Date and Blending Unit Accuracy can be swapped.
Makes all the tabs scrollable, which makes the dialog more usable (the
OK button should always be present unless the screen is absurdly small).
Only checked on GTK3.
Use hexpand instead of expand, and use margin-start instead of
margin-left (margin-left is deprecated in GTK+ 3.12). IMO it looks
better this way.
Also, set the properties using gtk_widget_set_* instead of g_object_set.
Add God of War Demo ntsc,
Add Burnout Takedown E3 Demo ntsc,
Adjust regions for Harry Potter ATCOS/ATPOA,
Add comment for crc 0x7ACF7E03 - multiloader.
Automatic mipmapping: Harry Potter (Chamber Of Secrets,
Prisoner of Azkaban, Order Of The Phoenix), The Incredible Hulk:
Ultimate Destruction.
Add some missing crc ids for GT4 demo discs.
Adjust Spartan crc hack: Combine/ease the hacks in to one.
Only remove the glow/yellow bloom effect and don't skip any other effects that shouldn't be skipped. UI and some other post processing effects work properly now.
Add crc id CrashBandicootWoC RU.
Add some missing RU crc ids: Onimusha3, ICO, TombRaiderUnderworld, SoulReaver2, LegacyOfKainDefiance.
Removed crc id 7ACF7E03 and mentions of that id and it's duplicates. The id is from a multiloader when packing images, and not an actual crc id from a game(s).
Add FinalFightStreetwise RU, SoulCalibur3 RU. Correcting the wrong id TenchuFS RU (the elf was modified widescreen cheat, sorry). Delite Kunoichi RU (the elf was modified widescreen cheat, the original coincides with the EU).
Move a hack that removed burning/hot air effect. The effect is rendered properly but causes slowdowns so it's best to move it to aggressive for now.
Add comments explaining what the crc hacks do.
Ease the crc hack and skip less effects, makes shadows and some other effects work properly.
The game experiences a bit more upscaling issues which can be resolved with Merge Sprite and Wild Arms offset HW hacks.
Purge Hw hack fixes for Spyro New Beginning and Eternal Night that fixed
HUD and menu display.
They will be replaced with EE patches in GameDB that work for both
software and hardware mode. A much better alternative and less GSdx
hacks.
Port from commit b0af54d3
Fixes shadows in Star Ocean 3.
Note: It works properly on native res only just like on GL.
Upscaling will cause some issues.
Only Direct3D10/11 supports it, D3D9 doesn't support integer operations
so we can't reuse the code.
Revert merge of Spyro Eternal Night / New Beginning hw hack.
Update Spyro New Beginning hack - fixes menu/hud flicker in HW mode.
SW mode still has issues with the menu/hud elements.
Improve #1490
The following games in the crc list are not used anywhere so
we can clean this list up. If some are needed in the future then
they can be re added.
List of removed games:
CaptainTsubasa,
Dororo,
HarvestMoon,
Jak1,
JamesBondEverythingOrNothing,
NamcoXCapcom,
SDGundamGGeneration,
SeintoSeiya,
SengokuBasara,
SilentHill2,
SilentHill3,
Siren,
TalesofDestiny,
VF4,
VF4EVO.
The crc hack broke graphics ingame, causing flickering/transparent
textures and other similar issues.
On a side note the game experiences upscaling issues that can be fixed
with Half Pixel offset hack.
Update it to the version found at
https://github.com/Microsoft/Windows-classic-samples , which is in an
MIT licensed repo, and add the LICENSE file (edited to remove the SIL
Open Font LICENSE part since that doesn't apply).
Some modifications have been made to reduce the diff/stop git
complaining (not including any file that wasn't in the previous version
and removing the related header includes in streams.h, and fixing some
but not all of the whitespace issues).
Move CRC hacks do DX level.
Hack that fixes shadows:
Shadows/glitchy black ground textures can be fixed with Preload Frame Data.
Hack that removed vertical stripes:
D3D10/11 correctly emulates texture shuffle but also needs depth support.
Don't skip draw calls on Jackie Chan Adv and SVC Chaos,
fixes regressions on Jackie Chan Adv and SVC Chaos.
Gregory: The correct fix would be to trace all textures writes to
be sure of the source. But it is a much bigger work.
Purge Sengoku Basara crc hacks. Texture shuffle is emulated correctly on
d3d11/ogl. d3d9 skips the bad draw call.
Move Eternal Poison crc hack to d3d level. Not needed on ogl since
the game is emulated correctly.
Move hack that removes texture shuffle for Demon Stoneback back to ogl level,
half screen bottom issue remains.
Extent CRC hack for The Getaway and The Getaway Black Monday to work on
EU regions.
Move CRC hack that removed shadows to Aggressive, shadows are misaligned
when upscaling - can be fixed with HPO. We can use the hack as a
speedhack for Aggressive state.
Add correct FBP code for Sly 2 E3 Demo. CRC hack should work properly now.
Purge God of War 1/2 CRC hacks that fixed/removed the vertical red lines.
No longer needed since the issue is fixed accross all renders.
Also useless to be kept for speedhacks.
Texture Shuffle changes:
Always Enable Texture shuffle on D3D10/11.
Previously Texture shuffle was enabled if CRC hack
level was below Full, this was kinda not good since
D3D also relies on CRC hacks on Full so you could either
stick with texture shuffle or crc hacks.
Texture shuffle is not supported on D3D9, however we can do a partial
port where instead of vertical lines with the effect we get the effect
on the entire screen. Better than nothing I suppose.
Ported some of the code from OpenGL to D3D
( just a copy - paste job :) ),
part of the code misses a dedicated shader but we can still
use it to fix various issues on many games.
List of affected games tested so far:
The Godfather, Final Fight Streetwise, The Suffering Ties that Bind,
Urban Chaos have their vertical lines issues fixed
(highly possible for other games as well), MGS and Stolen see an improvement
but they are still broken without crc hacks. Other games that suffered
similar issues are probably affected as well.
Channel Shuffle changes:
Update Channel Shuffle detection. A lot of games should see an improvement,
MGS, Urban Chaos, Stolen have their top left corner issues resolved.
Other games should be affected as well that use similar logic.
They still miss a shader so some effects are still broken/show glitches
but it's a nice improvement for D3D users.
Shared changes:
Texture Shuffle and Channel shuffle have been moved to their
own dedicated functions. Should make things a bit cleaner.
Move part of the code for Texture Shuffle to GSRendererHW to be shared
across all HW renderers, should aboid copy paste/duplicate code.
Replace/remove an old crc hack that was used to fix the red vertical
lines issue, the hack is no longer needed. The new hack removes depth
effects on D3D only.
Note: The game has another vertical lines issue that can be fixed with
texture shuffle on D3D.
Add comments to Simple2000Vol114 explaining what the hacks do.
Merge identical code for Spyro Games in to one to avoid duplicate code.
Rename hacks name for Jak series from OO_Jak to OO_JakGames since there
are multiple games added.
This follows PR #2330.
Add some missing regions: Tomb Raider Legend JP,
StarWars Force Unleashed EU, SuperMan Returns EU, Valkyrie Profile 2 FR.
Rename GT3/Concept titles, they were incorrect.
Adjust Harley Davidson region id from NoRegion to US.
Add some missing regions to automatic mipmapping:
FIFA 03 US, FIFA 04 EU, FIFA 05 EU.
Reformat a few comments.
Add "Default" nametag for default list options for the hacks: Sprite,
Round Sprite, GL Advanced settings, HPO.
Should help users know which options are the default ones with less
confusion.
Add CRC id for FFXII US, SFEX3 EU,
GT4 CH and GT4 Online Beta US.
Adjust BullyCC region from US to EU.
Add Missing regions for Ratchet & Clank,
Ace Combat, Destroy All Humans and Soul Reaver
series to Automatic Mipmapping.
Removes GT4/Tourist Trophy CRC hacks. The hack had already been moved to
aggressive due to VRAM spike issues, but is no longer necessary at all
due to the in-game brightness/contrast setting issue being moved to
behind the frame buffer conversion hack for Direct3D and being resolved for OpenGL.
Move hacks that disabled shadows to DX level since OpenGL renders
shadows properly with Depth Emulation.
Some other upscaling issues appear with the disabled hack like a small
black border on the bottom of the screen or some ui elements but those
can be fixed with TC X,Y Offset hack.
Previously, the calculation for the size of data to be loaded was done
based on the rendering target buffer size and scaling multiplier, which
was totally wrong. This led to different resolutions having different
load sizes while the size of the real GS memory is common regardless of
the scaling variancies.
Hence use the default rendering target buffer size for the load size
independent of the scaling values. I've also removed a buffer height saturation
code which seemed unreliable.
Note: The accurate version of the code can be enabled using the macro
provided in config.h (which is more intensive on resources), the current
code goes along with the approach of maintaining a decent performance
level along with a formidable accuracy.
Adjust region id for BT2.
Move the sky texture(depth) hack back to Partial level only for the EU
regions. Effect is still not rendered correctly and causes a half
screen bottom issue.
Add R&C3 EU to Automatic Mipmapping.
Previously the limit was 1000, now 10000 in the GUI. It should help in
some rare cases where a higher number is needed without the need of ini
editing and value reset issues caused by the GUI.
Previously if HW hacks were enabled Merge Sprite was active(if checked) on
native resolution even if the GUI option was disabled, which in result
caused glitches in games on native resolution.
This should address that issue.
Remove Aggressive CRC hacks for SSX 3. Was used to remove the red lines
on older versions but no longer needed since the issue has been fixed.
Offered 1fps or less speed bump but it's not worth keeping for such a
minimal increase.
Merge all FFX CRC hacks in to one. They share the same code so it's
better to have one to avoid duplicate code.
Move CRC hack for Bleach Blade Battlers to Aggressive. It removes the
character shading. It can be used as a speed hack since the gains are
quite good from it. Around 15-30%.
Add missing CRC ids for Soul Calibur 2 and 3.
Move CRC hacks to DX level. They are not needed anymore on OpenGL since
Depth Emulation fixes depth issues (shadows).
Move CRC hack to Partial that fix the half screen
bottom issue since the effect is not rendered correctly.
Move CRC hack to Aggressive. These hacks are only
needed when running upscaled resolution. They skip the
blur effect which cause ghosting and some other screen issues.
Side effect is they also remove the channel effect on OpenGL
which is emulated correctly so let's put them on Aggressive.
Comment out a hack, it's unknown what the hack does atm.
If there are new issues then it will be added back.
Added comments what the hacks do.
Partial port for channel shuffle effect to Direct3D for Tekken5.
The effect is skipped and not rendered but now the top left
screen glitch has been resolved.
Note: At least Minimum CRC level is required for this to work.
Add hidden option "UserHacks_DisableNVhack" to disable
the Nvidia hack on Direct3D which added black lines on the right
and bottom of the screen. Could be useful for Intel and AMD GPUs.
A better solution would be to add Vendor Id detection instead,
but this will do for now.
To disable the Nvidia hack add UserHacks_DisableNVhack=1 in GSdx.ini
Fixes glitchy water in Rogue Galaxy in Direct3D when the hack is
enabled.
Fixes Test Drive car reflection in Direct3D when the hack is enabled.
OTher games are affected as well.
Adds automatic HW mipmapping support.
It relies on CRC ids so if a game does
not have their CRC id but needs mipmapping
it will not work until the id is added.
Add GUI menu and tooltip for Automatic mipmap
"Automatic (Default)"
This option will be default option from now on.
Rename "Very Slow" text option to "Slow" for full mipmap
as it caused the text not to fit properly in the menu.
Credits also go to @RedPanda4552 and @ssakash for helping
with the code.
Rearrange the two columns of HW hacks, new arrangement
is done in alphabetical order on Windows and Linux.
Rename some hacks on Linux to match the windows version.
Some other minor tweaks as well.
The following patch grays out the configure button when there's no
configuration dialog available for the selected codec. What's the use in
clicking it when no dialog pops up? :P (I've been tricked by it lots of
times)
Add HW Hack that enables Framebuffer Conversion on the CPU instead of the GPU.
Can fix broken textures on games but at the cost of slower performance.
List of games: Harry Potter games, FIFA Street games.
Games like Call of Duty, Kung fu Panda might also be affected as well as others
especially on Direct3D.
Add HW Hack GUI option on Windows/Linux for 4-bit and 8-bit Framebuffer conversion hack
named "Frame Buffer Conversion".
Regression was introduced in #1954
GSdx caused the emulator to crash when the renderer was restarted.
It may have affected older gpus from nvidia/amd
with older OpenGL support as well.
The swap interval function must be called on the same thread that
rendering takes place on. This fixes an issue where the turbo speed and
frame limiter hotkeys fail to disable vsync when the OpenGL renderer is
used.
Using range loops where possible (correctly).
Using auto where possible (minimize code changes whenever it's decided to change back to a std container).
Use more efficient erase pattern (where possible).
Minor code tweaks.
Alessandro Vetere