In a particular hashing heavy scene in Crazy Taxi the Murmur3 hash used 3.11% CPU time.
The new CRC32 hash in the same scene used 1.86%
This was tested on a Nvidia SHIELD Android TV with Cortex-A57s.
This will be a bit slower on the Nexus 9, the Denver CPU core is a bit slower with CRC32 texture hashing than Murmur3 texture hashing.
The new implementation has 3 options:
SyncGpuMaxDistance
SyncGpuMinDistance
SyncGpuOverclock
The MaxDistance controlls how many CPU cycles the CPU is allowed to be in front
of the GPU. Too low values will slow down extremly, too high values are as
unsynchronized and half of the games will crash.
The -MinDistance (negative) set how many cycles the GPU is allowed to be in
front of the CPU. As we are used to emulate an infinitiv fast GPU, this may be
set to any high (negative) number.
The last parameter is to hack a faster (>1.0) or slower(<1.0) GPU. As we don't
emulate GPU timing very well (eg skip the timings of the pixel stage completely),
an overclock factor of ~0.5 is often much more accurate than 1.0
Using SDL_INIT_JOYSTICK implies SDL_INIT_EVENTS which installs a signal
handler for SIGINT and SIGTERM. There will be a way to prevent this in
2.0.4 but for now we'll need to handle SDL_QUIT.
Actually caused by IniFiles::GetLines leaving the output vector in its
old state if the section wasn't found, and Gecko::LoadCodes not checking
the return value. Fix by moving lines->clear() up.
- Change the Wiimote emulation SYSCONF R/W to use the temporary NAND if in use.
- Fix up SysConf API so this actually works.
Kind of a hack. Like I said, this can be cleaned up when configuration
is synced...
Eventually, netplay will be able to use the host's NAND, but this could
still be useful in some cases; for TAS it definitely makes sense to have
a way to avoid using any preexisting NAND.
In terms of implementation: remove D_WIIUSER_IDX, which was just WIIROOT
+ "/", as well as some other indices which are pointless to have as
separate variables rather than just using the actual path (fixed, since
they're actual Wii NAND paths) at the call site. Then split off
D_SESSION_WIIROOT_IDX, which can point to the dummy NAND directory, from
D_WIIROOT_IDX, which always points to the "real" one the user
configured.
- FileSearch is now just one function, and it converts the original glob
into a regex on all platforms rather than relying on native Windows
pattern matching on there and a complete hack elsewhere. It now
supports recursion out of the box rather than manually expanding
into a full list of directories in multiple call sites.
- This adds a GCC >= 4.9 dependency due to older versions having
outright broken <regex>. MSVC is fine with it.
- ScanDirectoryTree returns the parent entry rather than filling parts
of it in via reference. The count is now stored in the entry like it
was for subdirectories.
- .glsl file search is now done with DoFileSearch.
- IOCTLV_READ_DIR now uses ScanDirectoryTree directly and sorts the
results after replacements for better determinism.
There is no nice way to correctly "detect" the "used" memory, so we just say
we're fine to use 50% of the physical memory for custom textures.
This will fix out-of-memory crashes, but we still might run into swapping issues.
Replaces them with forward declarations of used types, or removes them entirely if they aren't used at all. This also replaces certain Common headers with less inclusive ones (in terms of definitions they pull in).
Change TMemCheck::Action to return whether to break rather than calling
PPCDebugInterface::BreakNow, as this simplified the implementation; then
remove said method, as that was its only caller. One "interface" method
down, many to go...
- Move JitState::memcheck to JitOptions because it's an option.
- Add JitOptions::fastmem; switch JIT code to checking that rather than
bFastmem directly.
- Add JitBase::UpdateMemoryOptions(), which sets both two JIT options
(replacing the duplicate lines in Jit64 and JitIL that set memcheck
from bMMU).
- (!) The ARM JITs both had some lines that checked js.memcheck
despite it being uninitialized in their cases. I've added
UpdateMemoryOptions to both. There is a chance this could make
something slower compared to the old behavior if the uninitialized
value happened to be nonzero... hdkr should check this.
- UpdateMemoryOptions forces jo.fastmem and jo.memcheck off and on,
respectively, if there are any watchpoints set.
- Also call that function from ClearCache.
- Have MemChecks call ClearCache when the {first,last} watchpoint is
{added,removed}.
Enabling jo.memcheck (bah, confusing names) is currently pointless
because hitting a watchpoint does not interrupt the basic block. That
will change in the next commit.
Otherwise, it would work but any async sending would be delayed by 4ms or
wait until the next packet was received.
Also increase the client timeout to 250ms, since enet_host_service is now
really interrupted.
With my previous changes Dolphin would fail to create the user directory if it didn't exist, and would dump all the configuration options in to the cwdir.
This was a bit more complicated to fix in a clean fashion, so I took to moving around code concerning user directories.
Instead of having GetUserPath serve a dual purpose of both getting and setting our user directories, break out to a new SetUserPath function.
GetUserPath will know only get the configured user path.
SetUserPath will set our user paths and setup the internal user path state.
This ending up being a lot cleaner overall, which is nice. Also less mind bending when attempting to read the code.
So now we won't dump all of our configuration in to the cwdir if ~/.dolphin-emu isn't found.
Fixes issue 8371.
Clamping a rectangle correctly requires fully clamping all four
coordinates in the general case.
This should fix issue 6923, sort of; at least, it fixes the part where a
rectangle ends up with a nonsensical height after being clamped.
A bit more efficient if we are only pushing two VFP registers.
We can probably be a bit more efficient in the future by mixing paired loadstores in to the other paths as well.
Previously on FPR pushing and popping we would do a single STR/LDR per quad FPR we wanted to push/pop.
In most of our cases when we are pushing and popping VFP registers they will be consecutive registers that will save more efficiently using the NEON
loadstores that can do up to four quad registers.
So this can potentially cutting instructions down to ~1/4th the amount of instructions if the registers are all consecutive.
On the Cortex-A57 this is basically just an icache improvement, but on the Nvidia Denver this may be optimized to be more efficient. Either way it's a
win.
The Load directory wasn't being properly reassigned when the user path changed, which causes a bunch of issues with things loading from the wrong
place when using the -U option in Dolphin.
The UI should decide on where it wants the user directory, not our core system.
This is in anticipation of some upcoming work on Android which will need proper user directory setting.
Since libcommon.a is also the last library to be linked, this has the
totally hacky but useful side-effect that it doesn't require people to
modify CMake files for temporarily adding VTune code to other Dolphin
libraries.
The PowerPC CPU has bits in MSR (DR and IR) which control whether
addresses are translated. We should respect these instead of mixing
physical addresses and translated addresses into the same address space.
This is mostly mass-renaming calls to memory accesses APIs from places
which expect address translation to use a different version from those
which do not expect address translation.
This does very little on its own, but it's the first step to a correct BAT
implementation.
The Windows implementations of CharArrayFromFormatV() and
StringFromFormat() use the "C"/".1252" locale instead of the user
locale (using _vsnprintf_l). On non-Windows, the user locale was used.
This leads to bugs on non-Windows: the Overclock parameter was
serialised with the user locale ("0,279322" in some locale) and was
interpreted back as "0" (because the C locale is used for parsing the
string).
Make non-Windows CharArrayFromFormatV() and StringFromFormat()
consistent with their Windows counterpart.
The locale code is not enables for Android:: uselocale is only
available since API 21 and API 21 only supports C and C.UTF-8.
If we are compiling in the CRC32 hash, clang has an issue with casting a s32 to a u64.
Change our lens argument to a unsigned integer to fix the issue.
Intellisense doesn't like defines in PCH files, and it doesn't like the deleted
constructor for BitField. (I think it's being overly strict about the
"must have no non-default constructors" rule for classes in unions.)
Someone thought it would be a good idea to have the location as the first argument on the instruction.
Changed it to how it is supposed to be disassembled.
Optimistically assume used GQRs are 0 in blocks that only use one GQR, and
bail at the start of the block and recompile if that assumption fails.
Many games use almost entirely unquantized stores (e.g. Rebel Strike, Sonic
Colors), so this will likely be a big performance improvement across the board
for games with heavy use of paired singles.
Won't work with all games, but provides a nice way to spend extra CPU to make
a variable framerate game faster (e.g. Spyro or The Last Story), or to make
a game use less CPU at the cost of a lower framerate (e.g. Rogue Leader).
If we have a shift amount that is the full length of the source register then we have an invalid instruction.
This can happen when dealing with a couple of PowerPC instructions.
This same adjustment is already in the ARMv7 emitter.
Fixes issues with negative offsets in loadstore instructions.
Adds ADRP/ADR instructions.
Optimizes MOVI2R function to take advantage of ADRP on pointers, can change a 3 instruction operation down to one.
Adds GPR push/pop operations for ABI related things.
The reason this didn't break is that bitwise instructions like VPAND,
VANDPS, and VANDPD do the exact same thing. The only difference is the
data type they are intended for.
The builtin byteswap routines cause critical failure on AArch64 when built with the Android toolchain.
I didn't experience this issue when building for Linux using a local qemu chroot.
Seems to be only an issue with the Android toolchain when building AArch64.
Use our generic version instead.
If the inputs are both float singles, and the top half is known to be identical
to the bottom half, we can use packed arithmetic instead of scalar to skip
the movddup.
This is slower on a few rather old CPUs, plus the Atom+Silvermont, so detect
Atom and disable it in that case.
Also avoid PPC_FP on stores if we know that the output came from a float op.
Move the JITed function/basic-block registration logic out of the CPU
subsystem in order to add JIT registration to JITed DSP and
Video/VertexLoader code.
This necessary in order to add /tmp/perf-$pid.map support to other
JITed code as they need to write to the same file.
When we cleaned up the code to calculate the shm_position and total_mem
in one step, we sometimes skipped over certain views because they were
Wii-only. When looking at the total memory, we'd look at the last field,
whether or not it was skipped. Since Wii-only fields are the last view,
this meant that the shm_position was 0, since it was skipped, causing us
to map a 0-sized field. Fix this by explicitly returning the total size
from MemoryMap_InitializeViews.
Additionally, the shm_position was being calculated incorrectly because
it was adding up the shm_position *before* the mirror, rather than after
it. Fix this by adopting a scheme similar to what we had before.
The code to calculate the offsets into the SHM file wasn't properly
respecting the skip flags, causing it to calculate offsets beyond
the end of the SHM file.
This code was ported from out_ptr, which was a double-pointer, and
wanted to double-check that the proper arena was actually allocated.
When I ported it to store the pointer directly in the view regardless
of whether out_ptr was non-NULL, I got confused here and instead
caused the code to only free the arena if the first byte was non-zero.
This code originally tried to map the "low space" for the Gamecube's
memory layout, but since has expanded to mapping all of the easily
mappable memory on the system. Change the name to "GrabSHMSegment" to
indicate that we're looking for a shared memory segment we can map into
our process space.
These are effectively unused, since the memmap already maps them in one
place. For 32-bit, they might have some slight advantage, but we already
special-case the regular "high-mem" pointer for 32-bit, so just use the
one we already have...
This is a higher level, more concise wrapper for bitsets which supports
efficiently counting and iterating over set bits. It's similar to
std::bitset, but the latter does not support efficient iteration (and at
least in libc++, the count algorithm is subpar, not that it really
matters). The converted uses include both bitsets and, notably,
considerably less efficient regular arrays (for in/out registers in
PPCAnalyst).
Unfortunately, this may slightly pessimize unoptimized builds.
We weren't dropping a newline character from the string, we were cutting off the last character of the hardware name.
This fixes my TK1 being called 'lagun' when it's name is 'laguna'
GCC has optimized this using the exact same code since 4.7 or 4.8.
Android building falls back to the __linux__ route.
No need to keep these around anymore since we aren't building on an old GCC version.
Before this commit, the two were reversed ("cpu_string" had the brand, e.g. "AuthenticAMD"; and "brand_string" had the CPU type, e.g. "AMD Phenom II X4 925").
This is good hygiene, and also happens to be required to build Dolphin
using Clang modules.
(Under this setup, each header file becomes a module, and each #include
is automatically translated to a module import. Recursive includes
still leak through (by default), but modules are compiled independently,
and can't depend on defines or types having previously been set up. The
main reason to retrofit it onto Dolphin is compilation performance - no
more textual includes whatsoever, rather than putting a few blessed
common headers into a PCH. Unfortunately, I found multiple Clang bugs
while trying to build Dolphin this way, so it's not ready yet, but I can
start with this prerequisite.)
I found it via clang complaining about a useless null check on an array,
but I decided to get rid of the array in favor of dynamic allocation, as
there was no reason to assume a maximum length of 0x32 bytes. Plus, add
a CFString type check just in case, and switch to UTF-8 in the
off-chance it matters.
The result has not actually been tested, as I have no CD drive.
It only ever did anything on 32-bit OS X.
Anyway, it wasn't even on the right functions, and these days
ABI_PushRegistersAndAdjustStack should handle maintaining the ABI
correctly.
This helps us avoid accidentally clobbering flags between two instructions
when the flags are expected to be maintained. Dolphin will of course crash
immediately, but at least it will crash loudly and alert us of the mistake,
instead of forcing hours of bisecting to find the subtle way in which the JIT
has managed to sneak a flag-modifying instruction where there shouldn't be one.
This is inconsistent with how other containers are used (i.e. with Do()), but making std::array be used with Do() seems rather confusing when there's also a DoArray available.
To avoid FPRs being pushed unnecessarily, I checked the uses: DSPEmitter
doesn't use FPRs, and VertexLoader doesn't use anything but RAX, so I
specified the register list accordingly. The regular JIT, however, does
use FPRs, and as far as I can tell, it was incorrect not to save them in
the outer routine. Since the dispatcher loop is only exited when
pausing or stopping, this should have no noticeable performance impact.
- Factor common work into a helper function.
- Replace confusingly named "noProlog" with "rsp_alignment". Now that
x86 is not supported, we can just specify it explicitly as 8 for
clarity.
- Add the option to include more frame size, which I'll need later.
- Revert a change by magumagu in March which replaced MOVAPD with MOVUPD
on account of 32-bit Windows, since it's no longer supported. True,
apparently recent processors don't execute the former any faster if the
pointer is, in fact, aligned, but there's no point using MOVUPD for
something that's guaranteed to be aligned...
(I discovered that GenFrsqrte and GenFres were incorrectly passing false
to noProlog - they were, in fact, functions without prologs, the
original meaning of the parameter - which caused the previous change to
break. This is now fixed.)
This is the bare minimum required to run a few games on AArch64.
Was able to run starfield and Animal Crossing to the Nintendo logo.
QEmu emulation is literally the slowest thing in the world, it maxes out at around 12mhz on my Core i7-4930MX.
I've tested a few instruction encodings and am expecting most to work as long as one stays away from VFP/SIMD.
This implements mostly instructions to bring up an initial JIT with integer support.
This can be improved to allow ease of use functions in the future, dealing with the raw imms/immr encodings is probably the worst thing ever.
Uses are split into three categories:
- Arbitrary (except for size savings) - constants like RSCRATCH are
used.
- ABI (i.e. RAX as return value) - ABI_RETURN is used.
- Fixed by architecture (RCX shifts, RDX/RAX for some instructions) -
explicit register is kept.
In theory this allows the assignments to be modified easily. I verified
that I was able to run Melee with all the registers changed, although
there may be issues if RSCRATCH[2] and ABI_PARAM{1,2} conflict.
The special case is where the registers are actually to be swapped (i.e.
func(ABI_PARAM2, ABI_PARAM1); this was previously impossible but would
be ugly not to handle anyway.
Prior to this change, it was possible to cause an infinite loop by making the string to be replaced and the replacing string the same thing.
e.g.
std::string some_str = "test";
ReplaceAll(some_str, "test", "test");
This also changes the replacing in a way that doesn't require starting from the beginning of the string on each replacement iteration.
Decreases total Wii state save time (not counting compression) from
~570ms to ~18ms.
The compiler can't remove this check because of potential aliasing; this
might be fixable (e.g. by making mode const), but there is no reason to
have the code work in such a braindead way in the first place.
- DoVoid now uses memcpy.
- DoArray now uses DoVoid on the whole rather than Doing each element
(would fail for an array of STL structures, but we don't have any of
those).
- Do also now uses DoVoid. (In the previous version, it replicated
DoVoid's code in order to ensure each type gets its own implementation,
which for small types then becomes a simple load/store in any modern
compiler. Now DoVoid is __forceinline, which addresses that issue and
shouldn't make a big difference otherwise - perhaps a few extra copies
of the code inlined into DoArray or whatever.)
(1) Rename ABI_ALL_CALLEE_SAVED to ABI_ALL_CALLER_SAVED, because that's
what it was actually defined as (and used as). Derp.
(2) RegistersInUse is always used for the purpose of saving registers
before calling a C++ function in the middle of a JIT block (without
flushing). There is no need to save callee-saved registers in this
case. Change the name to CallerSavedRegistersInUse and mask with
ABI_ALL_CALLER_SAVED.
Nothing obvious broke when starting up a Melee game. (I added a test
for anything actually being masked out; it happens, but in this
particular case seemed to occur at most a few dozen times per second, so
the actual performance benefit is probably negligible.)
This class loads all the common PP shader configuration options and passes those options through to a inherited class that OpenGL or D3D will have.
Makes it so all the common code for PP shaders is in VideoCommon instead of duplicating the code across each backend.
This was actually never used as far as I can tell. There was no wx event handling done whatsoever for the global ID, So this is basically a dead function.
This moves the Gekko disassembler to Common where it should be. Having it in the Bochs disassembly Externals is incorrect.
Unlike the PowerPC disassembler prior however, this one is updated to have an API that is more fitting for C++. e.g. Not needing to specify a string buffer and size. It does all of this under the hood.
This modifies all the DebuggingInterfaces as necessary to handle this.
On error mmap returns MAP_FAILED(-1) not null.
FreeBSD was checking the return correctly, Linux was not.
This was noticed by triad attempting to run Dolphin under valgrind and not getting a memory space under the 2GB limit(Because -1 wraps around on
unsigned obviously)
Previously using the new "lower 8 bits" registers (SIL, SPL, ...) caused SETcc
to write to other registers (for example, SETcc SIL would generate SETcc DH).
It was only used for Windows XP and lower.
This also bumps the _WIN32_WINNT define in the stdafx precompiled headers to set the minimum version as Windows Vista.
A previous PR changed a whole lot of min/maxes to std::min/std::max
but made a mistake here and used a templated min which cast it's
arguments to unsigned instead of casting return value.
This resulted in glitchy artifacts in bright areas (See issue 7439)
I rewrote the code to use a proper clamping function so it's cleaner
to read.
This shouldn't really be exposed as a public function and should only be called through other Do class functions that take a container type as a parameter.
Sometimes (in particular when using non-typesafe functions) it can be convenient to have a getter method rather than performing a potentially lengthy explicit cast.
This allows for removal of the strcpy calls, also it's technically way more safe, though I doubt we'll ever have a log name larger than 128 characters or a short description larger than 32 characters.
Also moved these assignments into the constructor's initializer list.
If a CPU string was incapable of being found we would return a null pointer, which would crash with strncpy.
Also if we couldn't get a CPU implementer we would call free() to a null pointer.
In addition, detect 64bit ARM running.
MemoryUtil.cpp was incorrectly using the old __x86_64__ define when it should be using _M_X86_64.
It was also using _ARCH_64 when it shouldn't have which was causing an errant PanicAlert to come up in my development.
Some compilers we care about (mostly g++) do not support std::make_unique yet,
but we still want to use it in our codebase to make unique_ptr code more
readable. This commit introduces an implementation derivated from the libc++
code in the Dolphin codebase so we can use it right now everywhere.
Adapted from delroth's pull request.
Set the x87 precision, even on x64. Since we are using x87 instructions
in the JIT now, we can't guarantee that x87 precision will never
influence Dolphin on x64.
The new NOP emitter breaks when called with a negative count. As it
turns out, it did happen when deoptimizing 8 bit MOVs because they are
only 4 bytes long and need no BSWAP.
Fixes issue 6990.
This uses a bit of templating to remove the duplicate code that is the CodeBlocks in each emitter headers.
No actual functionality change in this.
When creating a Fixupbranch we were swapping the BL and B targets.
I think this was found by PPSSPP a while ago, but they never send PRs to merge their changes upstream.
Between C++11 and C++14, volatile types stopped being trivially
copyable. The serializer has no reason to care about this distinction,
so tack on remove_volatile.
The underlying storage type of a bitfield can be any intrinsic integer type,
but also any enumeration.
Custom storage types are supported if the following things are defined on the storage type:
- casting 0 to the storage type
- bit shift operators (in both directions)
- bitwise & operator
- bitwise ~ operator
- std::make_unsigned specialization
Previously he function was misbehaving because of a missing check for
whether an 8-bit operand was a register operand; it would therefore
emit unnecessary REX prefixes, incorrectly assert on 32-bit targets, and
could potentially emit wrong code in rare cases (like a memory to register
operation involving AH.)
Also, some cleanup while I was in the area to make the function easier to
read.
The workaround of using fixed underlying types produces lots of warnings
in GCC because now the bit-fields are too small for the value range used
for conversion semantics.
Breakpoints have one, but memchecks don't, despite being cleared directly in the breakpoint window.
Now DolphinWX should call the interface functions and not the direct functions of the breakpoints or memchecks for clearing.
Our defines were never clear between what meant 64bit or x86_64
This makes a clear cut between bitness and architecture.
This commit also has the side effect of bringing up aarch64 compiling support.
- remove unused variables
- reduce the scope where it makes sense
- correct limits (did you know that strcat()'s last parameter does not
include the \0 that is always added?)
- set some free()'d pointers to NULL
This breaks Linux stdout logging.
This reverts commit 7ac5b1f2f8, reversing
changes made to 9bc14012fc.
Revert "Merge pull request #77 from lioncash/remove-console"
This reverts commit 9bc14012fc, reversing
changes made to b18a33377d.
Conflicts:
Source/Core/Common/LogManager.cpp
Source/Core/DolphinWX/Frame.cpp
Source/Core/DolphinWX/FrameAui.cpp
Source/Core/DolphinWX/LogConfigWindow.cpp
Source/Core/DolphinWX/LogWindow.cpp
Note I do not mean the Logging window, but the console window.
It's literally rarely, if at all used, and offers less advantages over the built-in logging window (ie. it breaks on different locales: http://i.imgur.com/Cs92tQE.png)
This commit should remove all of the console logging.
Floating-point is complicated...
Some background: Denormals are floats that are too close to zero to be
stored in a normalized way (their exponent would need more bits). Since
they are stored unnormalized, they are hard to work with, even in
hardware. That's why both PowerPC and SSE can be configured to operate
in faster but non-standard-conpliant modes in which these numbers are
simply rounded ('flushed') to zero.
Internally, we do the same as the PowerPC CPU and store all floats in
double format. This means that for loading and storing singles we need a
conversion. The PowerPC CPU does this in hardware. We previously did
this using CVTSS2SD/CVTSD2SS. Unfortunately, these instructions are
considered arithmetic and therefore flush denormals to zero if non-IEEE
mode is active. This normally wouldn't be a problem since the next
arithmetic floating-point instruction would do the same anyway but as it
turns out some games actually use floating-point instructions for
copying arbitrary data.
My idea for fixing this problem was to use x87 instructions since the
x87 FPU never supported flush-to-zero and thus doesn't mangle denormals.
However, there is one more problem to deal with: SNaNs are automatically
converted to QNaNs (by setting the most-significant bit of the
fraction). I opted to fix this by manually resetting the QNaN bit of all
values with all-1s exponent.
I give up. Merging the ppc_fp branch has caused issues in numerous games
and I can't find the bug. I'm leaving this merged to enable easy
recompilation for people who would like to play games that benefit from
non-IEEE mode emulation (e.g. Starfox Assault).
MemArena mmaps the emulated memory from a file in order to get the same
mapping at multiple addresses. A file which, formerly, was located at a
static filename: it was unlinked after creation, but the open did not
use O_EXCL, so if two instances started up on the same system at just
the right time, they would get the same memory. Naturally, this caused
extremely mysterious crashes, but only in Netplay, where the game is
automatically started when the client receives a broadcast from the
server, so races are actually quite likely.
And switch to shm_open, because it fits the bill better and avoids any
issues with using /tmp.
bDAZ is now called bFlushToZero to better reflect what it's actually
used for.
I decided not to support any hardware-based flush-to-zero on systems
that don't support this for both inputs _and_ outputs. It makes the code
cleaner and the intersection of CPUs that support SSE2 but not DAZ
should be very small.
- Add support for std::set and std:pair.
- Switch from std::is_pod to std::is_trivially_copyable, to allow for
types that have constructors but trivial copy constructors. Easy,
except there are three different nonstandard versions of it required
on different platforms, in addition to the standard one.
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
Note that before pushing those changes, they were initially tested in a branch, and passed the compilation testing. Sorry that I didn't catch this before.
This implements a partial JITIL based off of the JIT64IL. It's enough to run most games, albiet at a slow speed.
Implementing instructions for this IL is really simple since it basically is just enabling based on what is already in JIT64IL, and then enabling each individual IL instruction.
And fix some stuff up. It would probably be good to unify the stack
handling some more rather than having ABI_PushRegistersAndAdjustStack do
part of it and ABI_AlignStack the rest, causing unnecessary subtract
instructions on Linux x86 (only).
As part of that, change SafeLoadToEAX to SafeLoadToReg, and have JitIL
use that, which should fix fastmem on JitIL.
This should also fix a potential stack corruption issue with x86.
Also define _M_* in a common location, and clean up code that these
changes break (including DSPJit files that assume X86 yet are compiled
on ARM for some reason...)
- For GCC, use intrinsics that will work on ARM.
- Add AtomicExchangeAcquire.
- Make Atomic{Load,LoadAcquire,Store,StoreRelease} work for any suitable type.
- Call ABI_AlignStack even on x86-64.
- Have ABI_AlignStack respect the difference in current alignment
between the root JIT function, which has a prolog, and
ProtectFunction thunks, which do not. This was causing many games
to crash on start on OS X. Since this might otherwise mean changing
the stack pointer before every call...
- Have one prolog/epilog function rather than two (one of which
definitely did not do what it was thought to do), and make it
actually work like a normal one, so that the stack frame shows up
properly in the debugger. There should be no performance impact.
Changes a lot of parsing code which previously was not aware of the notion of
key/value, and operated only with raw lines. Now key/value is the default and
lines are handled as raw only if they do not contain =, or they start with $ or
+ (for Gecko/AR compatibility).
It isn't easily accessible with sigaction or Mach exceptions (well,
requires an additional system call in the latter), and isn't necessary.
(and get rid of the enum, because it's only used once, and the comments
are more expressive than enum names)
MSVC insisted on using a copy assignment where a move was intended and
ought to be used. This would have been caught, because the class in
question inherits from NonCopyable, which declares a move assignment
operator, which is supposed to delete the implicitly declared copy
assignment operator, but of course MSVC didn't do that either, causing a
class that should have been safe to be unsafe.
(Intertwined enough that's it's easier to do in one patch.)
(1) /dev/es did not support state save, which could cause crashes and
incorrect behavior after loading.
(2) NANDContentLoader tried to read all of a title's contents into
memory when it was first opened. Two issues:
- If any contents were missing, it bailed out. However, with DLC,
only some of the contents may be downloaded, as determined by the
permission bits in the ticket. Instead, return an appropriate error
when a content is accessed that doesn't exist on the filesystem
(don't bother checking the permission bits though).
- Everything was loaded into memory - even if it consisted of 3 GB of
songs, which caused Dolphin to lag out for quite a while (and would
fail on 32-bit). Instead, open content on demand.
This is required to be able to move objects that inherit from it.
(Note that this patch also #ifs out the class for the externals that
include it yet are compiled in pre-C++11 mode. It shouldn't matter,
since those externals don't use it.)
It's not enough to check for the CPUID bit to know if AVX is supported since
AVX requires OS support (new set of registers == more registers to be saved
when context switching). If the OS does not support, the cpuid bit will still
be set but using YMM registers will cause an illegal exception fault.
The MS INI parser and most other INI parsing libraries APIs only support
comments at the beginning of lines. Right now, some Game INI files use sections
like:
[OnFrame]#Add memory patches here
But these section headers are parsed separately, so this should not break
them.
This reverts commit 7aae9ccbc0.
Reasons:
- no test results have been provided to prove the usefulness of the patch
- broken coding style
- the author hasn't replied to any criticism
Lioncash
