fbca397c92
Merge pull request #439 from degasus/lighting-fix
...
Lighting cleanup
2014-06-21 12:17:26 +02:00
c5ef249c4b
Make the common "Failed to enumerate outputs" message much more useful.
...
Now it includes its most common cause, a simply-worded solution, and an exclamation point.
2014-06-20 15:51:54 -05:00
924ad1ee9f
LightingShader: hard code const variable
2014-06-19 16:46:53 +02:00
d93f2973f7
PixelShader: use the vertex const buffer for ppl
2014-06-19 16:33:33 +02:00
027baad73b
VideoCommon: use the Light struct in XF memory
2014-06-19 16:33:29 +02:00
e642c8d0c1
Merge pull request #497 from Armada651/osd-scaling
...
D3D: Reset viewport before drawing the OSD.
2014-06-19 15:26:10 +02:00
ce54c1e571
Kill off replaceable usages of s[n]printf.
2014-06-18 19:53:38 -04:00
6c52ec93b7
D3D: Reset viewport before drawing the OSD.
2014-06-16 23:34:54 +02:00
f05d3f6e5d
Use only section-based ini reading.
2014-06-16 01:31:23 -04:00
020b4fde1e
Merge pull request #492 from Armada651/master
...
Remove EmuWindow
2014-06-15 14:16:53 +02:00
f2759ffe65
Remove EmuWindow.
...
All it did was raise complexity.
2014-06-15 00:49:49 +02:00
d7736ac714
Merge pull request #445 from magumagu/video-dead-code
...
Video backends: remove dead code.
2014-06-13 22:38:22 +02:00
5d793881b0
Fix the capitalization of "GameCube" throughout the project.
2014-06-08 11:24:49 +09:00
d2e4c2fc50
Fix OpenGL ES version detection.
...
Mesa report GLES version as "3.0" not "3.00"
Spec mandates X.Y versioning scheme, doesn't say how long the decimal place must be.
2014-06-06 21:21:35 -05:00
9566dcf0da
OGL: speed up the EFB cache
...
gcc doesn't optimize this loops with -O2, so using memset now.
A flag to skip the clear funktion was added as the cache is already cleared most of the time.
2014-06-05 14:53:09 +02:00
d9eafd94a2
OGL-StreamBuffer: replace size_t with u32
...
Yes, this matters.
We align our buffer all the the time which needs a division. u64 divisions are just so slow.
2014-06-05 13:33:50 +02:00
606e46ba8d
OGL-StreamBuffer: move alignment to caller
...
Only the caller know if alignment is needed at all, so it can be skipped now.
2014-06-05 13:32:13 +02:00
02a4e3d70f
OGL-StreamBuffer: make the SLOT calculation much easier
...
The size of the buffer is now power of 2, so we can use a shift instead of a division.
This was at about 2% of the global CPU usage.
2014-06-05 13:32:13 +02:00
d81d2e8915
OGL-StreamBuffer: allocate fences in StreamBuffer directly
2014-06-05 13:32:13 +02:00
0688cfdaef
OGL-StreamBuffer: don't use coherent mapping
...
Coherent mapping seems to be much slower on fermi gpus.
2014-06-05 12:18:44 +02:00
0aecd9504e
Video backends: remove dead code.
2014-06-01 01:56:09 -07:00
49b0eef393
Remove the min/max functions in CommonFuncs.
...
The algorithm header has the same functions.
2014-05-29 21:44:41 -04:00
329fcad04f
Merge pull request #421 from CarlKenner/MissingSpace
...
Fix error message when D3D11 HResults fail.
2014-05-29 14:06:18 -07:00
361d53fdc7
Fix error message when D3D11 HResults fail.
...
Prevents showing the wrong function name by putting a space between the function name and "Failed".
Also fixes the capitalization.
2014-05-27 00:45:26 +09:30
1583ce9363
Use strings instead of arbitrary buffers for video statistics
2014-05-25 21:11:29 -04:00
b58753bd69
Merge pull request #370 from Sonicadvance1/remove_specialized_memcmp
...
Removes ZeroFrog's "optimized" memcpy and memcmp functions.
2014-05-22 13:02:11 -07:00
c1b6fcc00b
ogl: pixel format shader without resolving
...
v2: Don't use std::to_string as this function is broken on android.
2014-05-19 09:29:40 +02:00
e150d307a6
ogl: use ARB_texture_multisample for msaa
2014-05-19 09:21:44 +02:00
fab78c2dff
ogl: add ARB_texture_multisample
2014-05-19 09:21:44 +02:00
775858b6bc
ogl: drop NV_framebuffer_multisample_coverage
2014-05-19 09:21:44 +02:00
afea848e3b
ogl: drop csaa support
2014-05-19 09:21:44 +02:00
6950f533ae
Merge pull request #355 from magumagu/gx-missing-opcode
...
Opcode decoding: handle missing opcodes 0x88 etc.
2014-05-18 11:12:06 +02:00
a4bb0dafb4
Removes ZeroFrog's "optimized" memcpy and memcmp functions.
...
These were only compiled in on Windows and x86_32.
They provided "optimized" copies and compares based on blocksizes for the AMD Athlon and Duron CPU families.
The code was taken from something that AMD provides with a as-is license.
Just get rid of this crap.
2014-05-17 18:03:31 -05:00
fc34d5a130
Merge pull request #360 from magumagu/lighting-rounding
...
Video backends: fix rounding in lighting computation.
2014-05-17 21:06:31 +02:00
9b82d72070
Video backends: warn on usage of GL_DRAW_QUADS_2.
...
It's not normally used, so if it shows up, it could indicate a CPU emulation
bug.
2014-05-17 11:55:32 -07:00
0fac17da33
Merge pull request #269 from magumagu/swbackend-xfregisters
...
SW backend: use VideoCommon XFRegisters struct.
2014-05-17 10:40:57 +02:00
1357277f40
Video backends: mass-replace "xfregs" with "xfmem".
2014-05-16 18:58:07 -07:00
8f5342c442
Video backend: merge global var xfmem into xfregs.
...
There isn't really any reason to keep them separate.
2014-05-16 18:55:31 -07:00
818c89313e
Video backends: unify xfregs/xfmem structures.
...
Removes the duplicate swxfregs global variable/struct from the software
backend in favor of the ones from VideoCommon.
2014-05-16 18:55:30 -07:00
8b82cea704
Video backends: fix behavior of "konst" TEV inputs.
...
Also fixes TEVCOLORARG_HALF.
Values verified to match hardwarere.
2014-05-16 12:19:35 -07:00
b8817267f4
Merge pull request #366 from Jezze/vertex
...
OGL/VertexManager: Remove unused variable.
2014-05-16 16:18:14 +02:00
25e8dc0aed
Merge pull request #354 from magumagu/gx-primitive-mask
...
Opcode decoding: 0xC0 isn't a valid command.
2014-05-16 15:59:59 +02:00
f742c5a057
OGL/VertexManager: Remove unnused m_CurrentVertexFmt
2014-05-13 23:59:08 +02:00
9e4eeb3b9b
Video backends: fix rounding in lighting computation.
...
For whatever reason, the hardware doesn't do a full divide by 255, but
instead uses an approximation with shifting, similar to the way it is done
in TEV.
2014-05-11 12:53:02 -07:00
17577affba
D3D: Don't pass D3D10_SHADER_WARNINGS_ARE_ERRORS to the compiler in debug builds.
...
For quite a while this has been causing integer division to generate a warning as error, blocking shader compiling. This means probably no one has even been running D3D in debug builds...
I tried disabling the warning with a #pragma, but it doesn't seem to apply when this flag is used.
2014-05-10 22:12:54 -07:00
39d439fc48
Opcode decoding: handle missing opcodes 0x88 etc.
...
Hardware testing shows that they do the same thing as the 0x80 family of
opcodes: they draw quads.
2014-05-10 20:33:28 -07:00
369c0c4ce2
Opcode decoding: 0xC0 isn't a valid command.
...
Fix our opcode decoders to handle this appropriately.
2014-05-08 15:49:19 -07:00
b4e1ac5f08
Merge pull request #185 from degasus/shader-cleanup
...
Shader cleanup
2014-05-06 11:37:11 +02:00
bca0b7b543
OpenGL: delete unused function parameter in TextureConverter.
...
(While I'm here, also mark some functions static.)
2014-05-05 10:56:36 -07:00
25b8edd2a6
ogl: fix signed vs unsigned comparison warning
2014-05-05 17:06:36 +02:00
2d8cfb89d7
Changes posmtx vertex attribute to integer.
...
This makes it so we don't need to do some dumb casting from float to integer in our shaders.
Only tested in OpenGL, needs to be tested in D3D.
2014-04-30 19:11:06 -05:00
99338daa8f
Fixes glVertexAttribIPointer on GLES.
...
We need to pull in function pointers for OpenGL 3.0 in order to use glAttribIPointer.
This isn't too big of an issue, and this code will be gone in the future when we change over to libepoxy.
Just need to push code upstream to libepoxy to support Android with GLES and GL first.
2014-04-30 19:11:06 -05:00
a40ea4e26a
Merge pull request #236 from magumagu/d3d11-fix-peekz
...
D3D11: Use appropriate shader for PEEK_Z.
2014-04-27 16:09:02 +02:00
fe65474cc4
Software renderer: Update a reference link.
2014-04-24 00:42:08 +02:00
d8ca861fec
Merge pull request #287 from Tilka/unused_variable
...
Fix "warning: unused variable 'skipFrames'"
2014-04-19 09:03:19 +02:00
d523d2002b
Fix "warning: unused variable 'skipFrames'"
2014-04-19 04:59:37 +02:00
92ec49ac9f
Change to ARM's naming convention in DriverDetails.
...
This matches how ARM handles their naming in their drivers for different models.
Really it's that way because both Mali-T6xx and Mali-T7xx fall under Midgard.
While everything else (except Mali-55) fall under Utgard.
2014-04-18 21:06:32 -05:00
648b9865d8
D3D11 backend: fix rounding in texture encoder.
...
We need to explicitly round when converting colors from float to uint
because multiplying a normalized float by 255 might not result in a whole
number. (The exact result here may vary depending on your
drivers/hardware.)
Ideally, we shouldn't be using floating point here, but fixing that is a
much more complicated patch.
Fixes gxtest TEV tests using Intel HD 4000.
2014-04-15 23:36:05 -07:00
685d612c8c
Software backend: don't skip red component in TEV.
2014-04-15 14:05:12 -07:00
5e1c6aba33
Software backend: make TEV rounding match hardware.
...
Formulas stolen from gxtest. (Not sure how "==" got turned into "!=", but
I'm pretty confident the patched version is correct.)
2014-04-15 14:04:46 -07:00
4e0b7260b6
Merge pull request #263 from Sonicadvance1/DetermineMaliVersion
...
Add Mali driver version check and support of checking for Mali-T7xx
2014-04-14 19:20:04 +12:00
812ff4686b
OpenGL backend: remove useless header Globals.h.
...
The header has no content, so it can can just be deleted.
2014-04-12 19:25:37 -07:00
96ffbe345d
VideoSoftware: remove const memory usage of DebugUtil
2014-04-12 13:32:53 +02:00
f18a3cc650
OpenGL config: clear backend_info.Adapters on init
...
Fixes a minor UI glitch where if you switch from Direct3D to OpenGL, the
OpenGL config page would appear to have an adapter choice available.
2014-04-12 00:17:36 -07:00
a9fa49f34d
Support checking for the Mali-T7xx line of GPUs.
...
They are similar enough that they will share bugs with their drivers, so make them fall under the same Mali-Txxx umbrella of bug issues.
If there is ever a need in the future for having separate bugs depending on family, we can support that then.
2014-04-11 23:46:44 -05:00
ed67cc3fb2
Add the ability to determine the Mali driver version.
...
This is the only way we can determine the video driver version with mali.
Really it's a good thing that they only push driver updates once every two years, makes it easy to determine what driver anybody is running.
2014-04-11 23:38:40 -05:00
fd9c1fa746
VideoBackend: remove unused config vars.
...
No point to keeping around variables which are always "true".
2014-04-11 14:53:12 -07:00
76d7c1eb9c
D3DBackend: Don't recompute ID3D11Layout.
...
CreateInputLayout requires a shader as an input, but it only cares about
the signature; we don't need to recompute it for different shaders with
the same inputs.
2014-04-11 13:13:01 -07:00
306b9afd1e
Merge pull request #224 from magumagu/swrender-deletepixelfork
...
Software backend: Delete forked PixelEngine.
2014-04-11 20:01:23 +02:00
d0f89b2b63
SWBackend: Fix code style.
2014-04-05 13:08:00 -07:00
13119e6755
Merge pull request #240 from Sonicadvance1/GLSLES310_binding
...
Add initial support for GLSL ES 3.10.
2014-04-04 08:43:20 +13:00
3251d78f89
Add initial support for GLSL ES 3.10.
...
GLSL ES 3.10 adds implicit support for the binding layout qualifier that we use.
Changes our GLSL version enums to bit values so we can check for both ES versions easily.
2014-04-03 00:46:09 -05:00
ca9ee3586f
Merge pull request #227 from magumagu/swbackend-fix-shaders
...
SW backend: make shaders work on Intel/Windows.
2014-04-02 14:51:14 -05:00
f9d2f7e88c
D3D11: Use appropriate shader for PEEK_Z.
...
Trying to use GetDepthMatrixProgram outside of
TCacheEntry::FromRenderTarget is a bad idea, so don't. Instead, use a
shader which only copies the input.
Fixes lens flare depth test in Twilight Princess. See
http://code.google.com/p/dolphin-emu/issues/detail?id=5999 .
2014-03-30 19:50:53 -07:00
9b03178673
Merge pull request #222 from comex/more-clang-fixes
...
More clang fixes
2014-03-30 13:24:08 +02:00
92dd498fa7
Fix harmless warnings.
2014-03-30 01:40:11 -04:00
bdcd5ba39b
SW backend: make shaders work on Intel/Windows.
...
Apparently the Intel shader compiler doesn't implement "#if" correctly...
so use "#ifdef" instead.
2014-03-29 13:10:43 -07:00
0661efea84
Software backend: Delete forked PixelEngine.
...
Mostly just zapping a bunch of duplicated code; the only interesting thing
going on here is the changes to the performance counter implementation.
2014-03-29 12:07:20 -07:00
664c8d30a0
Remove all trailing whitespaces from our codebase.
2014-03-29 11:05:44 +01:00
1dead05cae
Software renderer: Properly calculate tev combiner output.
...
As pointed out by dolphin-emu/hwtests@461476112 .
2014-03-26 00:23:58 +01:00
a8c8db8da7
Software renderer: Use color combiner configuration for alpha combiner compare mode inputs.
...
As pointed out by dolphin-emu/hwtests@f684f2498 .
2014-03-26 00:23:58 +01:00
16105db709
BPMemory: Make use of BitField in a number of structures.
2014-03-25 23:57:58 +01:00
8941f19cdb
BPMemory: Expose the pixel_format and zformat fields in PE_CONTROL as enumerations.
2014-03-25 23:57:58 +01:00
77a7bab5ae
BPMemory: Use the new BitField class in two selected structures.
2014-03-25 23:57:57 +01:00
89efec6109
Merge pull request #167 from neobrain/ogl-efbpokes
...
Implement EFB pokes in the OpenGL backend.
2014-03-20 15:25:56 -05:00
ae260e55e4
OGL/VertexManager: Do not check if g_nativeVertexFmt is zero
...
The variable is already dereferenced both before and after this
check which means that if this variable would ever be zero it would
have crashed dolphin already.
2014-03-18 21:33:30 +01:00
80421156b6
OGL/VertexManager: Minor cleanup of if case
2014-03-18 21:33:30 +01:00
7e39cf3b0d
.gitignore: fix the build directory pattern
2014-03-17 02:55:56 +01:00
2fcaca0603
More range-based loops and overrides
2014-03-17 02:55:55 +01:00
8d679e76d2
Merge pull request #164 from lioncash/cstr-cull
...
Kill off some usages of c_str.
2014-03-15 00:57:56 +01:00
d946e4e238
OpenGL: Implement color and z pokes.
2014-03-14 23:39:52 +01:00
3a6389992e
PixelShaderGen: Treat UV coordinates like S17.7 integers (they're still stored as float, though).
2014-03-14 22:31:30 +01:00
0238a56816
PixelShaderGen: Change indirect texture matrix uniforms to use integers.
2014-03-14 22:31:18 +01:00
cff952c397
PixelShaderGen: Use integer math for indirect tev stage texcoord calculation.
2014-03-14 22:30:27 +01:00
fa77e1d2b6
PixelShaderGen: Use integer math for alpha testing.
2014-03-14 22:26:48 +01:00
2af50f04c2
OGL: Force highp for integers.
2014-03-14 22:26:26 +01:00
032c920247
OGL: Remove some dead code.
2014-03-14 22:26:26 +01:00
a82675b7d5
Kill off some usages of c_str.
...
Also changes some function params, but this is ok.
Some simplifications were also able to be made (ie. killing off strcmps with ==, etc).
2014-03-14 13:51:23 -04:00
31cfc73a09
Fixes spacing for "for", "while", "switch" and "if"
...
Also moved && and || to ends of lines instead of start.
Fixed misc vertical alignments and some { needed newlining.
2014-03-11 00:35:07 +13:00
d802d39281
clang-modernize -use-nullptr
...
and s/\bNULL\b/nullptr/g for *.cpp/h/mm files not compiled on my machine
2014-03-09 21:14:26 +01:00
f28116b7da
clang-modernize -add-override
2014-03-09 21:12:01 +01:00
c89f04a7c5
clang-modernize -loop-convert
...
and some manual adjustments
2014-03-09 21:11:59 +01:00
d461b3f33c
SW renderer: add missing ClearCurrent()
...
courtesy of degasus
2014-03-06 01:53:29 +01:00
4f02132f93
Make our architecture defines less stupid.
...
Our defines were never clear between what meant 64bit or x86_64
This makes a clear cut between bitness and architecture.
This commit also has the side effect of bringing up aarch64 compiling support.
2014-03-04 09:36:59 -06:00
1bdf232fed
videosoftware: More coding style fixes.
2014-03-03 19:03:15 +01:00
c6c6d20014
videosoftware: Provide a more elaborate comment on the FifoPlayer support hack.
2014-03-01 18:52:19 +01:00
17231418ef
videosoftware: Added hack to bypass xfb just so fifoplayer works.
...
Fifoplayer depends on the old behaviour of videosoftware (and the other
hardware backends in non virtual/real xfb modes) where the framebuffer
gets rendered directly to the screen.
Really fifoplayer should call BeginFrame/EndFrame when it finished
rendering a frame, but adding this hack back in is simpler.
2014-03-01 18:45:24 +01:00
7c93f2dc23
Fix the Windows build (broken in 315a8ba)
2014-03-01 01:33:19 +01:00
315a8ba1c0
Various changes suggested by cppcheck
...
- remove unused variables
- reduce the scope where it makes sense
- correct limits (did you know that strcat()'s last parameter does not
include the \0 that is always added?)
- set some free()'d pointers to NULL
2014-02-28 12:43:20 +01:00
f628695d31
comment fixes
2014-02-26 12:48:52 +01:00
aaaa5af0b2
remove (ATTR|VARY)(IN|OUT) macros
2014-02-26 11:37:29 +01:00
7f539b6033
ogl: optimize real xfb a bit
...
Both nvidia + mesa seems not to optimize x / (2**n) to x >> n, so we do it ourself.
2014-02-26 11:37:28 +01:00
83b7bb64aa
Make Common/ mostly IWYU clean (and fix errors in rest of the project detected by this change).
2014-02-22 23:37:29 +01:00
6d8df311a3
Merge pull request #88 from lioncash/relative-includes
...
Relative includes
2014-02-20 02:08:44 +01:00
425f9dcd51
Fix more header sorting issues in VideoBackends/ (now check-includes clean).
2014-02-20 01:01:11 +01:00
a18e8249a4
Merge pull request #79 from Tilka/nits
...
Silence some Windows compiler warnings
2014-02-18 14:19:38 +01:00
2afe215271
Convert all includes to relative paths.
2014-02-18 02:19:10 -05:00
3fd87a7636
Second and final pass of clearing out tabs.
2014-02-17 02:19:41 -05:00
b18a33377d
Merge pull request #55 from Sonicadvance1/GLExt-InitArray
...
Change OpenGL extension initialization in to a big array
2014-02-17 02:16:16 +01:00
6b5f6ddaa1
Merge pull request #82 from lioncash/vertical-alignment
...
Fix some vertical alignments
2014-02-16 19:12:42 -06:00
6c4ee1753a
Fix some vertical alignments
...
ie. uses spaces for alignment.
2014-02-16 20:12:05 -05:00
eae9d47c3c
Change OpenGL extension initialization in to a big array
...
This is a reasonable chunk of changes and moves from multiple initialization functions in to an array initialization.
2014-02-16 17:40:34 -06:00
de5bfd0bce
Merge pull request #37 from degasus/VideoCommonApiFixes
...
VideoCommon API cleanups
2014-02-16 22:08:28 +01:00
92f8d93e96
Remove the old MMIO access "interface".
2014-02-16 19:22:40 +01:00
f8f14c83a3
MMIO: Port the SW CP/PE MMIOs to the new interface.
...
Migration is now complete.
2014-02-16 19:22:40 +01:00
4129b30494
MMIO: Port the VideoCommon CP MMIOs to the new interface (and provide framework for other video related mappings).
2014-02-16 19:22:40 +01:00
0d6ab2c658
Silence some Windows compiler warnings
...
by adding explicit type casts.
2014-02-16 16:59:45 +01:00
647aad0a19
inline SetViewport into VertexShaderManager
2014-02-15 21:09:42 +01:00
d5f1f0d4a9
merge some common parts of Swap() into VideoCommon
2014-02-15 11:33:43 +01:00
3551259c7a
use EFBRectangle for scissor rect
...
This one is backend independed. The backend should recalc such things on their own.
2014-02-15 11:33:43 +01:00
1f4219b5b4
move perfquery enable checks into videocommon (caller side)
2014-02-15 11:33:43 +01:00
5a660c27bc
rename UpdateViewport to SetViewport like all others setters in RenderBase.h
2014-02-15 11:33:43 +01:00
3cd6918dec
fix ogl video config crash
...
This will happen when playing on any other backend than ogl which have a non-trival GLInterface::GetMode() method.
2014-02-15 11:33:43 +01:00
e5318d2624
move shared parts from VertexManager::vFlush into VideoCommon
2014-02-15 11:33:43 +01:00
655d22512b
Kill off some usages of the ArraySize macro.
...
This required the use of std::array in some cases.
2014-02-15 02:43:54 -05:00
404624bf0b
Turn loops into range-based form
...
and some things suggested by cppcheck and compiler warnings.
2014-02-13 09:05:50 +01:00
d2038049f5
Replace all include guard ifdefs with "#pragma once"
2014-02-10 18:07:16 -05:00
8d25e12085
Merge pull request #54 from lioncash/cleanup
...
Cleanup mismatching struct/enum indentations.
2014-02-09 19:26:15 -06:00
28b5c8be47
Merge pull request #53 from lioncash/remove-another-xchg
...
Remove function Xchg from SWStatistics.cpp.
2014-02-10 02:01:21 +01:00
fc30597f7a
Remove function Xchg from SWStatistics.cpp. Like the one previous, this can be replaced with std::swap
2014-02-09 19:55:44 -05:00
ebb48d019e
Clean up some struct indentations
...
Also cleaned up the indentations of some variable declarations.
2014-02-09 19:40:11 -05:00
40182a48a5
Cleanup enum indentations.
2014-02-09 16:16:10 -05:00
6a5cd02629
Cleanup GLExtensions on how it fails.
...
If there is an issue with a reported extension, disable it instead of failing out entirely.
Fixes an issue with buffer_storage that I had overlooked as well.
2014-02-08 19:50:12 -06:00
9f91769def
Improve GLExtensions compile time.
...
This changes from using logical and to bitwise and, which causes the compile time to drop from an absurd amount of time to around five seconds on my
crappy laptop.
2014-02-08 15:04:17 -06:00
af24ed782d
Merge pull request #14 from degasus/uboWorkaroundRemove
...
OGL: Remove non-UBO code path.
2014-02-04 14:05:55 -08:00
8ab6ed4b49
SWCommandProcessor: fix the CPReg structure fields
...
This structure fields should match byte-to-byte the layout of MMIO registers:
it is addressed using the MMIO reg address when doing a CP MMIO read. This was
unfortunately not the case, causing CP reads to be mostly broken with the
software renderer.
2014-02-04 01:16:14 +01:00
6089e4470a
OGL: remove ubo workaround
...
This was only keeped for some broken mesa versions. Meanwhile most used versions should be fixed for almost a year.
2014-02-01 22:33:45 +01:00
3dd31fe22b
Merge pull request #11 from degasus/VertexLoaderCleanup
...
Vertex loader cleanup.
2014-01-31 06:13:26 -08:00
010a0d481a
VideoCommon: remove Cache Displaylist
...
This option was known to break every second game and only boost a bit.
It also seems to be broken because of streaming into pinned memory and buffer storage buffers.
v2: also remove dlc_desc
2014-01-31 07:30:55 +01:00
a65162f1cd
PortableVertexFormat: use AttributeFormat for posmtx attribute format
2014-01-31 07:19:34 +01:00
6c59b691b0
PortableVertexFormat: use AttributeFormat for texcoord attribute format
2014-01-31 07:19:34 +01:00
ef2d6e7d53
PortableVertexFormat: use AttributeFormat for color attribute format
2014-01-31 07:19:34 +01:00
b38ef39ab7
PortableVertexFormat: use AttributeFormat for normal attribute format
2014-01-31 07:19:34 +01:00
210f4f3e55
PortableVertexFormat: add a struct which hold all needed information for every vertex and use this for position
...
atm, position attribute is hardcoded both in VertexLoader and in backends.
v2: fix coding style + cleanup lookup table
2014-01-31 07:19:25 +01:00
02d1d8e6a0
NativeVertexFormat: swap unsigned / signed formats to match GX order
2014-01-30 11:12:10 +01:00
99b6c82ac3
[Android] Fix Adreno v53 development drivers rotating framebuffer
...
Older Qualcomm drivers rotated the framebuffer 90 degrees and this fix didn't work.
Now for some obscene reason it rotates a full 180 degrees.
This can at least be worked around by flipping around the image on our end.
2014-01-29 16:39:45 -06:00
b1290a8630
OGL: remove version check for buffer_storage on windows
...
On Windows, nvidia don't give us their driver version, so we can't workaround any issues.
As buffer_storage is broken on some drivers, we wanted to disble it for them.
So we can't.
Luckyly only "some" released driver versions are affected as this extension is only available since some months. Let's hope that nobody have to use one of this driver version, else they will get a black screen ...
2014-01-28 15:15:26 +01:00
9b6c6fa9e4
BBox: Changed the rounding again, the old one fixed Paper Mario but had bugs in Mickey's Magical Mirror. This change fixes the glitches in both games.
...
Also fixed some compiler warnings.
2014-01-26 13:21:22 +00:00
d3fd0eddbb
OSX: don't avoid unsync mapping on nvida gpus just because the windows driver doesn't like it
...
OSX has their own driver, so performance issues aren't shared with the nvidia driver (unlike the closed source linux and windows nvidia driver). So now they'll also use the MapAndSync backend like all other osx drivers.
fixes issue 6596
I've also cleaned up the if/else block selecting the best backend a bit.
2014-01-26 11:00:29 +01:00
dd42af9a7c
Videosoftware: Fix memory cleanup code.
2014-01-25 11:06:18 +13:00
fd8757a64b
Fix OpenGL 2.1 devices that support everything we need.
...
The only two devices that do this are Mesa software rasterizer and Intel Ironlake(With a few hacks).
Basically since it doesn't support OpenGL 3.0, it can't grab the version the new way.
So failing that, it sets to GL 2.1, and continues.
Further along, on Ironlake at least, it tries grabbing the extensions the new GL 3.0 way and fails.
So have a fallback that grabs the extensions string the old way, in probably the most elegant way possible.
2014-01-23 16:02:53 -06:00
65121cf9a9
OpenGL: remove unused OpenGL headers
2014-01-23 18:52:57 +01:00
1ff681a412
D3D: move streaming buffer fallback into D3D backend
...
Neith OGL nor VideoCommon doen't use it, so there is no need to have it in VideoCommon.
2014-01-23 15:27:18 +01:00
ff002320a5
OpenGL: Stream vertices + indices
2014-01-23 15:12:31 +01:00
128fcdac26
OpenGL: refactor all of our StreamBuffers
...
The old way was to use big switch/case statements based on a type of buffer.
The new one is to use inheritance.
This change prohibits us to change the buffer type while running, but I doubt we'll ever do so.
Performance should also be a bit better. Also a nice cleanup.
Added some comments about this different kind of buffers.
2014-01-23 15:12:31 +01:00
be1fee6d74
OpenGL: change StreamBuffer in a streaming way
...
This is a bit slower on map_and_* because of flushing and _very_ much slower on buffer(sub)?data because of a new memcpy.
But this design allow us to decode directly into a gpu buffer, eg vertexloader will profit :)
2014-01-23 15:12:31 +01:00
07db7520bf
[GLExt-Cleanup] This cleans up some extra bits unneeded in the extension headers
...
gl.h and glext.h provide most of the function pointer typedefs and defines for extensions and core features.
The only one it doesn't provide is GL 1.1 function typedefs, but this is to be expected.
If anything needs defines or typedefs in their header in the future, that's as easy as before.
2014-01-23 07:11:13 -06:00
ebbf1d392b
VideoCommon: merge trivial parts of VertexManager::Flush
2014-01-21 10:47:00 +01:00
60632fda6f
OpenGL: remove small optimization
...
This one was introduced to reduce the glBindTexture and glActiveTexture calls. But it was quite a bit of logic and only an improvment on uploading/creating a texture, which is done rarely.
2014-01-21 10:34:48 +01:00
fe02833f13
OpenGL: fix our ubo workaround when blend_func_extended is missing
2014-01-21 10:03:05 +01:00
8b2c540544
Finally Merge branch 'videosoftware-xfb'
...
This adds xfb support to the videosoftware backend, which increases it's
accuracy and more imporantly, enables the usage of many homebrew apps
which write directly to the xfb on the videosoftware backend.
Conflicts:
Source/Core/VideoBackends/Software/SWRenderer.cpp
Source/Core/VideoBackends/Software/SWmain.cpp
2014-01-21 00:10:00 +13:00
2c8340e1dc
Move GLInterface.h into GLInterface directory
2014-01-20 00:46:21 -07:00
683dbc09ac
Stop building GLExtensions.cpp twice(One in GL, one in software). We don't need to build it twice, this'll save a bit of time in the build process.
...
Also a bit of spacing cleanup.
2014-01-19 11:37:37 -06:00
5d26bf6d9d
Rename our GLInterface class function 'GetProcAddress' in order to not have clashing function names due to Windows.
2014-01-18 14:18:32 +00:00
bea484e12f
Move Win32 specific function grabbing fallback to WGL.cpp. Fixes issue 6964.
2014-01-18 14:10:24 +00:00
839df31347
Merge of GL-AutoChoose.
...
This branch is the final step of fully supporting both OpenGL and OpenGL ES in the same binary.
This of course only applies to EGL and won't work for GLX/AGL/WGL since they don't really support GL ES.
The changes here actually aren't too terrible, basically change every #ifdef USE_GLES to a runtime check.
This adds a DetectMode() function to the EGL context backend.
EGL will iterate through each of the configs and check for GL, GLES3_KHR, and GLES2 bits
After that it'll change the mode from _DETECT to whichever one is the best supported.
After that point we'll just create a context with the mode that was detected
2014-01-18 04:11:59 +00:00
5a599d472e
Merge branch 'GLExtensions'
2014-01-17 16:49:51 +01:00
6b01839525
VideoCommon: merge triangle+list+point index buffers
...
We are used to render them out of order as long as everything else matches, but rendering order does matter, so we have to flush on primitive switch. This commit implements this flush.
Also as we flush on primitive switch, we don't have to create three different index buffers. All indices are now stored in one buffer.
This will slow down games which switch often primitive types (eg ztp), but it should be more accurate.
2014-01-17 16:34:53 +01:00
e932a349e8
[GLExtensions] fixup for missing changes on rebase
2014-01-17 16:10:10 +01:00
29e0a90b88
[GLExtensions] Rename internal GetProcAddress function since it clashes with the global Windows function. Fix Windows function pointer grabbing.
2014-01-17 16:06:46 +01:00
6cdb05b633
[GLExtensions] OpenGL 3.0 also added GL_ARB_map_buffer_range to core.
2014-01-17 16:06:23 +01:00
a5ffe9932a
[GLExtensions] Future proof ourself by putting the default: instance on the top, so we'll grab extensions if they support something newer. Handle older GLVersions in the case they get that far.
2014-01-17 16:06:18 +01:00
2a11fead5c
[GLExtensions] Populate the extension list for OpenGL implementations that don't show core extensions.
2014-01-17 16:06:13 +01:00
0ea6718d99
[GLExtensions] Fix OS X build.
2014-01-17 16:06:08 +01:00
34c9a33807
[GLExtensions] Remove AGL GetProcAddress. Change dlsym to using RTLD_NEXT. Enable dlsym fallback for OS X
2014-01-17 16:06:03 +01:00
ca96274936
[GLExtensions] Make sure to link against libdl since we use it to grab GL function pointers in Linux/Android in the case the GLInterface->GetProcAddress fails.
2014-01-17 16:05:57 +01:00
45dfa3a481
[GLExtensions] Missed a couple USE_GLES3 compile time differences.
2014-01-17 16:05:52 +01:00
97dc20d1be
[GLExtensions] Pull in all the function pointers for OpenGL 1.1, This removes the need for a couple compile time differences between GL and GLES3 mode.
2014-01-17 16:05:40 +01:00
f308b878b2
[GLExtensions] Oops. Don't just outright disable these helper functions.
2014-01-17 16:05:34 +01:00
cfb8b43b4a
[GLExtensions] Don't fail out loading funciton pointers in both ES2 and ES3 modes.
2014-01-17 16:05:25 +01:00
fc1f8291d6
[GLExtensions] Make sure to initialize our function pointers with VideoSoftware as well.
2014-01-17 16:05:07 +01:00
17955fa025
[GLExtensions] Still had a GLEW lib hanging out in the CMake file for the software renderer.
2014-01-17 16:01:49 +01:00
f4bd7bdef0
fix windows build
...
add the GL include (back) to Base.props
use a similar technique to GLX.cpp (by Sonic) in WGL.cpp to get
wglSwapIntervalEXT without the WGLEW check
Conflicts:
Source/Core/VideoBackends/OGL/OGL.vcxproj
Source/Core/VideoBackends/OGL/OGL.vcxproj.filters
Source/VSProps/Base.props
2014-01-17 16:01:17 +01:00
10bd61a9d2
[GLExtensions] Dynamically pull in the GL 1.3 and 1.4 functions as well.
2014-01-17 15:56:54 +01:00
d5a7ea2041
[GLExtensions] KHR_debug on OpenGL ES 3 has a KHR suffix on their function pointers. In Desktop OpenGL there is no suffix. So handle this correctly. Make the GrabFunction macro slightly less evil, so update the init_* to reflect it. Thanks Bh44L for the suggestion.
2014-01-17 15:56:28 +01:00
d093276e93
[GLExtensions] Fix a typo in KHR_debug
2014-01-17 15:56:20 +01:00
cf8865a6e5
[GLExtensions] Add ARB_buffer_storage to negate at least one null pointer instance.
2014-01-17 15:52:34 +01:00
71681de81a
[GLExtensions] Initial code drop for GLExtensions. This drops GLEW entirely from the codebase. This has been tested on Android and Linux+ATI. Of course untested on Windows and Apple. Also untested with Linux + EGL but should be fine there. There are most likely a couple of extensions I'm missing which would result in null pointer runs but not bad for the initial commit.
...
Conflicts:
CMakeLists.txt
Externals/GLew/glew.vcxproj
Externals/GLew/glew.vcxproj.filters
Source/Core/VideoBackends/OGL/CMakeLists.txt
Source/Core/VideoBackends/OGL/GLFunctions.cpp
Source/Core/VideoBackends/OGL/GLFunctions.h
Source/Core/VideoBackends/OGL/GLUtil.h
Source/Core/VideoBackends/OGL/Render.cpp
Source/VSProps/Base.props
2014-01-17 15:50:51 +01:00
f1adc56a56
Remove vertex streaming hack.
...
NV has buffer_storage, AMD has pinned memory.
Both are better than that hack which shouldn't ever have been introduced in the first place.
2014-01-16 00:11:12 +01:00
5e5db9fbc6
VideoCommon: cleanup of "components" usage
...
This "u32 components" is a list of flags which attributes of the vertex loader are present.
We are used to append this variable to lots of vertex generation functions, but some of them don't need it at all.
2014-01-15 16:58:36 +01:00
95aa977d81
OGL: remove masking from streambuffer
...
We used this to disable pinned memory for index buffer, but as the detection
was reworked completely, it's just unused code.
2014-01-09 18:52:05 +01:00
eb310cbd1d
VideoCommon: disable efb access + perf querys on cph thread
...
The usual way to handle this kind of request is to rise a flag which the gpu thread polls.
The gpu thread itself either generates the result or just write zeros if disabled.
After this, it rise another flag which says that this work is done.
So if disabled, we still have the cpu-gpu round trip time. This commit just returns 0 on the cpu thread
instead of playing ping pong...
2014-01-09 18:37:59 +01:00
cdf69adcb0
Fix for previous commit. I was supposed to use GL_VERSION, not GL_RENDERER.
2014-01-07 19:35:06 -06:00
d2e62796fc
Probe the GL_RENDERER string on Nvidia to grab the driver version.
2014-01-07 18:29:04 -06:00
55717ed216
D3D: Verbosify an error message.
2014-01-06 10:31:09 +00:00
c42f274e22
OpenGL: use shader 420pack if available to staticly bind ubo location
...
Bindung locations after compiling a shader stalls the driver. So if we manage not to bind anything after compilation, the lag would be reduced much.
2014-01-05 10:38:45 +01:00
4fff5ac90d
OpenGL: drop UBO-workaround usage for efb2ram shaders
...
It's just brainfuck to use this workaroung there. Just fetch the uniform location like all other util shaders.
2014-01-05 09:52:26 +01:00
0f0a3cc509
ogl: clamp to edge for out of bound efb access
...
fixes issue 6898
OpenGL defaults are GL_REPEAT, which is even more unlikely than GL_CLAMP_TO_EDGE.
As I can't test the behavoir of the real hardware, I changed it to how it works before,
but I guess just clip the texture makes more sense.
2014-01-03 08:15:19 +01:00
0faf696be7
Merge Fail. We don't disable BaseVertex on broken pinned memory.
2014-01-01 17:20:09 -06:00
1118226f27
Merge branch 'master' into buffer_storage
2013-12-31 19:18:30 -06:00
8d8b0fc884
Merge branch 'master' into buffer_storage
...
Conflicts:
Source/Core/VideoBackends/OGL/Src/Render.cpp
Source/Core/VideoCommon/Src/DriverDetails.cpp
Source/Core/VideoCommon/Src/DriverDetails.h
2013-12-31 15:41:50 -06:00
34692ab826
Remove unnecessary Src/ folders
2013-12-31 14:03:19 -05:00
43e618682e
Convert all vcxproj files to UNIX line endings
2013-12-31 14:03:18 -05:00
6d63db96e9
Disable primitive restart on buggy OS X Intel HD 3000 drivers.
2013-12-30 18:26:55 -06:00
de16b7207c
D3D/OGL: Add a TODO noting that we don't support GX_CULL_ALL, most notably required for accurate zfreeze emulation.
2013-12-30 20:37:59 +01:00
bbde075420
Software renderer: Add a zfreeze related TODO.
2013-12-30 20:18:53 +01:00
a5bfdbf6cd
Free performance for AMD+Linux. Instead of disabling BaseVertex due to pinned_memory. Just disable pinned_memory for the ELEMENT_ARRAY_BUFFER type which has issues with baseVertex(ELEMENT_ARRAY_BUFFER)+pinned_memory. In my two tests with this, I went from 5FPS to 11FPS in one test, and 2FPS to 6FPS in another.
2013-12-28 08:00:44 -06:00
0b31fc8f52
[buffer_storage] Temporary fix for Android/GLES3 just like how everything else is. Cleanup for this will be in a new branch.
2013-12-28 05:16:39 -06:00
8fdcba0c06
[buffer_storage] Code formatting changes suggested by Bh44L
2013-12-28 05:15:43 -06:00
935e1fdf99
[Android] Enable shader cache.
2013-12-28 04:55:39 -06:00
d8b7f4d73f
[Android] Support grabbing OpenGL extensions and a function for checking for support.
2013-12-28 01:08:52 -06:00
77ba051361
[buffer_storage] Add the CLIENT_STORAGE_BIT since we access the buffer more frequently on the client side than the server side. That is exactly what the hint is for.
2013-12-27 22:58:36 -06:00
d8ceb97a60
[buffer_storage] Require GLEW 1.10 which has the new OpenGL 4.4 methods. Fixes linux build.
2013-12-27 15:37:31 -06:00
ce99921c20
[buffer_storage] Implement ARB_buffer_storage. Disable it for GL_ARRAY_BUFFER due to a bug in Nvidia's drivers that causes black screen with it.
2013-12-27 10:56:03 -06:00
a87e0e7489
Remove our GLU dependency. Fix static zlib
2013-12-23 16:01:34 -07:00
e697d7a2dd
[Android] Work around Qualcomm's broken garbage in their v53 drivers. This doesn't fix the issue, just a work around. This is the stupidest issue coming from Qualcomm. Now Dolphin Mobile won't crash immediately, but there are new SPS issues.
2013-12-19 17:30:39 -06:00
945b903499
Work around AMD's broken Linux drivers when it comes to pinned memory and base_vertex usage. It seems that using pinned memory with base_vertex disabled is quicker than the other way around.
2013-12-19 09:40:13 -06:00
8c264a3964
In the shader log message, say if the error came from a PS or VS.
2013-12-18 22:21:14 -06:00
07820aaa9e
Software renderer: Add linear interpolation of fog range adjustment factors.
2013-12-16 18:42:46 +01:00
f9ff0bc55d
Have our OpenGL/ES context creation be less stupid.
2013-12-12 12:43:49 -06:00
eb3b933dd0
Remove all instances of OpenCL in the Dolphin Project. A brief history of OpenCL in Dolphin. OpenCL was originally added to the Dolphin codebase 1 month after it was released with OS X Snow Leopard in 2009. OpenCL was one of the largest group projects that Dolphin ever has had. The OpenCL texture decoder was originally aded with version 1.0 of the OpenCL spec; This version didn't have the capability of a OpenCL-OpenGL interop which would allow for uploading textures once and have it decoded directly to a OpenGL texure. This was to be worked out when the OpenCL 1.1 spec was released and allowed the interop. This work has never been done, and no one in the team is willing to work on it for various reasons. OpenCL has had the unreasonable expectation that it increases the performance of video games that require a large amount of EFB copies like NSMBW. In reality, enabling OpenCL just put the graphics card in a higher power mode which increased the game speed. This is due to the unfortunate effect of Dolphin tending to not push GPUs out of their lower frequency power savings modes. Thanks to everyone that had contributed to the OpenCL texture decoder.
2013-12-11 15:15:55 -06:00
134c89ef98
OpenGL: disable shader cache when ShaderDebugging is enabled
...
fixes 6859
2013-12-09 16:45:20 +01:00
42619c1d2d
Merge branch 'ogl-tex2d'
...
Conflicts:
Source/Core/VideoBackends/OGL/Src/TextureConverter.cpp
2013-12-09 13:04:14 +01:00
687097d4bc
OGL: use integer uniforms for efb2ram texture converter
2013-12-09 12:33:50 +01:00
edc879ce48
OpenGL: fix crash in revision 95aeedec19
...
Real xfb didn't provide any read_stride, so there is a division by zero.
This commit calculates the correct read_stride for real_xfb, so there is also no hack for texture vs xfb needed.
2013-12-03 00:09:37 +01:00
95aeedec19
OpenGL: readback efb2ram with different strides at once
...
This is done with a pixel buffer object. We still have to stall the GPU, but
we only do it once per efb2ram call.
As the cpu can't access the vram, it has to queue a memcpy for the gpu and
wait for the gpu to finish this copy. We did this for every cache line which
is just stupid. Now we copy the complete texture into a pbo and readback this
at once. So we don't have to wait for lots of round-trip-times.
2013-11-26 20:05:49 +01:00
1138c2e155
OpenGL: reset EFB after efb2ram FB initialization
2013-11-26 04:07:59 +01:00
0b4cb2e15f
OpenGL: split real xfb + efb2ram framebuffers
2013-11-25 22:27:11 +01:00
9dbb262aab
Fix for OpenGL ES 3.
2013-11-25 15:11:06 +00:00
6750a81972
TextureConverter: Use integer math for swizzling
...
also move int(efb_coord) -> float(ogl_fb_coord) into WriteSampleColor
2013-11-25 15:49:13 +01:00
bcb31b09d3
TextureConverter: Use gl_FragCoord instead of uv0
2013-11-25 15:01:18 +01:00
454e1dd9a2
OpenGL: attributeless rendering for efb2ram
...
This wasn't as easy as we now have to cache also the uniform locations.
2013-11-25 13:03:35 +01:00
6ed3f82aff
OpenGL: attributeless rendering for postprocessing
2013-11-25 12:36:17 +01:00
38fe05b1df
OpenGL: attributeless rendering in emulate format changes
...
only cleanup
2013-11-25 12:27:54 +01:00
dd0b74ac15
OpenGL: cleanup efb2tex
...
Also use attributeless rendering. But we need the src rect, so set it by uniform.
If there is a slowdown here (I doubt as the driver likely has a fast path to update uniforms)
then we should check if this rect changes and only then update the uniform.
2013-11-25 12:19:34 +01:00
b93756df87
OpenGL: drop texture_rect hack
...
Everything is moved to texture2d (but often in a hacky way), so we don't need this global hack any more.
2013-11-25 09:05:50 +01:00
afcf0e65d1
OpenGL: fix emulate format changes for texture2d
2013-11-25 08:59:04 +01:00
b904d56036
OpenGL: fix efb2tex for texture2d
2013-11-25 08:43:55 +01:00
1a3e790d9e
OpenGL: fix xfb for texture2d
2013-11-25 08:38:00 +01:00
e8f23af10b
OpenGL: always use texture2d as efb
2013-11-25 08:32:41 +01:00
230e12ae8c
OpenGL: also remove VAO from xfb convertion
...
We use attributeless rendering, so officially we have to bind _any_ VAO.
As the state of this VAO doesn't matter, we don't have to switch it.
Also fix an AMD issue as they don't like to render from an empty VAO.
2013-11-25 07:38:20 +01:00
da3eef1019
Fix the issue with COLOROUT not being defined anymore. Fix a issue where Mali shader compiler is idiotic in finding an overload for the mix function.
2013-11-25 00:06:29 +00:00
f292819ff5
[Android] Due to recent changes in code breaking Tegra 4 support, and also the upcoming code which will be breaking GLES2 support entirely. Taking the initiative to drop the remaining support code from the codebase in preparation for the upcoming changes. For a look at how Dolphin on Tegra 4 looked like prior and would not have been able to be fixed at all due to Tegra 4 not supporting the precision we need in our shaders; Look at this Youtube video http://youtu.be/Ga7Jc_Ote7U
2013-11-24 15:49:23 -06:00
d410fe7c96
OpenGL: cleanup yuv2rgb (real xfb) workflow
...
We neither scale nor render from subimages, so we by using gl_Position, we don't have to generate _any_ vertices for this converting.
Also remove the glTexSubImage optimization as every driver does it when needed. But there are some workflows (eg on APU) where it's better to realloc this texture instead of a second memcpy or stall.
2013-11-24 15:56:50 +01:00
12741f6406
Add comments for anybody attempting accuracy improvements in the future.
2013-11-25 01:30:53 +13:00
b5bd2ba847
OpenGL: Enable filtering for EFB to Real XFB copies.
...
This fixes Real XFB Jaggies in OpenGL on games which use yscaling, such
as most PAL games.
This fixes the last of the "Real XFB Macroblocking" issues for opengl,
see issue #6503
2013-11-25 01:11:42 +13:00
e6b35642df
Fix Desktop GLSL versions in the recent changes.
...
Seems OpenGL ES 3 Requires you must have an lod argument, while Desktop
versions require you must not have a lod argument if you are using a
Sampler2DRect (which doesn't do Mipmapping).
2013-11-24 22:48:10 +13:00
531f840720
Fix OpenGL ES 3 in the recent changes. texelFetch doesn't require the lod argument in desktop GLSL versions, but in GLSL ES 3 it is a required argument.
2013-11-24 07:45:42 +00:00
994426b3dc
Opengl: fix real XFB sample positions
...
(0,0) and (1,0) aren't accurate xfb sample positions. This fixes the image shift to the left and some blocking on higher IR.
2013-11-24 05:39:40 +01:00
eef2cddfd7
Opengl: Fix opengl realxfb "macroblocking"/bluring issue.
...
YUYV textures should NEVER be interpolated/filtered in RGB colour space.
Use TexelFetch to always fetch an actual texture sample.
issue 6503
2013-11-24 17:15:11 +13:00
09f4439d0c
VideoCommon: reorder cbufid in orderer. We've used once two times
2013-11-24 04:43:54 +01:00
7d58278b67
Merge branch 'efb2tex_alpha'
2013-11-24 04:02:38 +01:00
2bf7379a7f
D3D: also fix MAX_COPY_BUFFERS
...
the D3D backend caches the colmat buffers. As we've created more different colmats, the maximum of this matrices must also be updated.
2013-11-24 04:00:12 +01:00
0a31255943
Unused arguments removed from XFBSource::Draw
...
Thanks neo.
2013-11-24 11:33:43 +13:00
43d1678fb2
Dynamically allocate color textures.
...
Saves ram when the video software backend isn't being used.
2013-11-24 00:52:17 +13:00
afe47ff847
Increase res of color texture to match PAL Super Smash Bros: Brawl
...
The pal version of SSBB has a 640x568 xfb, which is larger than the efb.
Increase the size of the static textures and put in some runtime checks
to prevent buffer overruns.
2013-11-24 00:15:08 +13:00
e720ea7837
Remove c++11 feature so VC2010 can be happy.
2013-11-23 23:44:05 +13:00
786e49ed48
Merge branch 'master' into videosoftware-xfb
...
Conflicts:
Source/Core/VideoBackends/Software/Src/EfbCopy.cpp
Source/Core/VideoBackends/Software/Src/SWRenderer.cpp
Source/Core/VideoBackends/Software/Src/SWRenderer.h
Source/Core/VideoBackends/Software/Src/SWVideoConfig.cpp
Source/Core/VideoBackends/Software/Src/SWmain.cpp
2013-11-23 23:20:45 +13:00
672fa65ee7
OpenGL: Enable pinned memory even for index buffers (works for me). Big-ish speedup on AMD GPUs for streaming intensive games.
2013-11-22 18:09:52 +01:00
f4a1f183b9
std::string can't be passed to ... format.
2013-11-17 11:28:11 +13:00
ea3990a41b
Don't pass char* to std::string.
...
Windows was fine with this :(
2013-11-17 11:25:12 +13:00
33d8166620
Use IOFile for TextureToPng to support non-ascii
...
Changed save texture/screenshot uses to std::string
Removed unneeded new/delete calls when dealing with temp data.
2013-11-17 11:14:38 +13:00
cce869ae01
[Core] Fix a mismatched dealloc in Render.cpp in the OGL backend. Should be delete[]
2013-11-16 17:05:51 -05:00
4a9c8e6f55
Change software rasterizer screenshot code due to change in api just now.
2013-11-16 15:37:40 -06:00
71d70d896f
Api was too confusing for people.
2013-11-17 10:34:34 +13:00
2025f00f88
Woops, vim copy and paste issue with a double include.
2013-11-16 09:41:01 -06:00
e8a4cc0f71
Screenshot capability of Software rasterizer for feature completness.
2013-11-15 22:08:08 -06:00
3a13dfdd9b
[OGL] Textures now save to PNG not TGA
2013-11-16 15:59:59 +13:00
033ed9477e
Reworked Screenshot saving.
...
Now OGL doesn't rely on WX for PNG saving.
FlipImageData supports (pixel data len > 3) now.
TextureToPng is now in ImageWrite.cpp/h
Video Common depends on zlib and png.
D3D no longer depends on zlib and png.
2013-11-15 13:00:38 +13:00
2703cae8d3
Fixed ZComploc and Zfreeze values being incorrectly saved.
2013-11-14 03:15:03 -05:00
0fced651a5
More warning fixes, OSX build fix.
2013-11-14 03:11:40 -05:00
7e9b970240
Use libpng for saving images.
...
TODO: Needs threading done similiar to OGL backend.
Fixes issue 6779.
2013-11-14 21:02:49 +13:00
39a4d4329d
more warning fixes
2013-11-14 02:19:15 -05:00
ca5b3b4773
atlbase not needed. Interim fix until I get png done.
2013-11-14 18:10:39 +13:00
7b53574b68
Support texture and screenshot dumping using WIC, no XP support.
2013-11-14 00:48:02 +13:00
abc3bddb54
Revert "D3D: Reintroduce depencency on D3DX11 because it's the most straightforward way to bring back some broken features."
...
This reverts commit a83c239765
2013-11-14 00:34:09 +13:00
f96e9e1ae4
warnings and code formatting
2013-11-13 04:03:46 -05:00
268bdf19ce
Fix format string warnings
2013-11-13 04:01:16 +01:00
22f727cc69
D3D: Use D3DX11 for taking screenshots.
2013-11-10 00:22:35 +01:00
0b02880b76
Revert "Be less dumb."
...
Revert "Actually, filename really does need to be a parameter because of some random debug thing."
Revert "fix non-HAVE_WX case"
Revert "Handle screenshot saving in RenderBase. Removes dependency on D3DX11 for screenshots (texture dumping is still broken)."
This reverts commits 00fe5057f174b5fb3ab4cd46138d295f72542e06
2013-11-10 00:22:33 +01:00
3de2ee5d46
D3D: Use D3DX for texture dumping.
2013-11-10 00:22:31 +01:00
a83c239765
D3D: Reintroduce depencency on D3DX11 because it's the most straightforward way to bring back some broken features.
...
The Dolphin development team is incapable of providing sufficient replacement for its previous usage in Dolphin and the advantages of dropping the dependency do not justify the removal of screenshots and texture dumping.
From now on, d3dx11.h, d3dx11async.h, d3dx11core.h and d3dx11tex.h are required to be stored somewhere in the header include path. I don't know if this is the case for anyone else than me, but I can't really say that I care after having people randomly merge unfinished branches into master.
2013-11-10 00:18:03 +01:00
274f6dd7ab
ogl: check default framebuffer for msaa
...
default framebuffer must not be sampled, so throw a panicalert if it is
2013-11-05 17:38:48 +01:00
e15f628935
Fix {Read,Write}FileToString.
...
We should be using binary always.
2013-11-05 00:33:41 +13:00
21610c2e54
Run code through clang-modernize -add-override to add 'override' decls.
2013-11-03 20:54:05 -05:00
c579637eaf
Run code through the advanced tool 'sed' to remove trailing whitespace.
2013-11-03 20:54:05 -05:00
965b32be9c
Run code through clang-modernize -loop-convert to create range-based for loops, and manually fix some stuff up.
2013-11-03 20:54:01 -05:00
00fe5057f1
Be less dumb.
2013-11-03 14:37:56 -05:00
74b5fb3ab4
Actually, filename really does need to be a parameter because of some random debug thing.
2013-11-02 22:44:27 -04:00
cd46138d29
fix non-HAVE_WX case
2013-11-02 22:23:29 -04:00
5f72542e06
Handle screenshot saving in RenderBase. Removes dependency on D3DX11 for screenshots (texture dumping is still broken).
2013-11-02 22:19:21 -04:00
82729fcc8f
Merge remote-tracking branch 'shuffle2/vc12'
...
Conflicts:
Source/Core/Common/Common.vcxproj
Source/Core/Common/Common.vcxproj.filters
2013-10-31 16:51:56 -04:00
498d491942
Merge branch 'viewportCorrection'
2013-10-29 22:33:51 +01:00
35824aa4d5
ogl: ceil viewport, rounding isn't supported on vs and this is more like the old behavior
2013-10-29 21:42:40 +01:00
f4a9deefa8
ogl: remove some unneeded includes
2013-10-29 18:55:50 +01:00
8e0f91f70e
d3d: use backend based UpdateViewport instead of VideoCommon one
2013-10-29 18:55:50 +01:00
acc0b3b21c
ogl: don't call SetViewportChanged from backend as it's not needed any more
2013-10-29 18:55:50 +01:00
3151d8709c
VideoCommon: move ViewportCorrection into VideoCommon
...
D3D doesn't allow bigger viewports than rendertargets. But flipper does, so the viewport will be clipped and the transformation matrix will be changed.
This was done in the D3D backend itself. This is now moved into VideoCommon. This don't reduce code, but in this way, VideoCommon doesn't depend on the backends.
2013-10-29 18:55:50 +01:00
f18c461fd6
[viewport-float] Fix OpenGL ES 3 build.
2013-10-29 17:10:02 +00:00
edf0511d4e
OGL: Use floating points for viewport parameters.
...
As told by neobain, ARB_viewport_array introduced float viewports.
They must be supported on OGL4.1+, but it's usually also implemented on 3.3 GPUs.
2013-10-29 15:29:06 +01:00
ccd30024b3
Update to VS2013 and a slew of build-related updates. Notes:
...
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
2013-10-26 17:55:38 -07:00
f82e1b9dc7
D3D: Use floating points for viewport parameters.
...
OpenGL 4.1 allows for a similar change thanks to ARB_viewport_array, but we don't make use of this, yet.
2013-10-26 12:40:37 +02:00
97cd42f5c3
Remove some unnecessary includes as well as simplifying exisiting ones if possible.
2013-10-19 19:58:56 -04:00
de1773affb
Basic precompiled header support for Linux/OS X. Shaves 20-30% off full rebuild time on my system.
2013-10-17 00:07:35 -04:00
cffe6ba3fd
Fix TextureEncoder.h
2013-10-16 23:20:51 -04:00
f850d283d1
ogl: only use bufferdata if buffersubdata is broken
...
Else nvidia fallback would be slower than needed
2013-10-16 15:46:58 +02:00
f0bf5aa113
Fix rendering on Adreno and Mali. This adds a new DriverDetails bug to know if the bufferstreaming is broken. Thanks degasus for fixing this.
2013-10-16 11:27:58 +00:00
5de7ac4791
OGL: update ubo workaround
2013-10-12 20:31:59 +02:00
6e2fe72b8f
D3D: also uses VideoCommon constant buffer handling
...
As now both backends uses the VideoCommon one, the old setting API was removed.
2013-10-12 20:29:56 +02:00
7c14463d11
ogl: implement useful constant buffer upload
...
this will remove the additional memcpy introduced in my last commit
2013-10-12 20:29:56 +02:00
4377618438
VideoCommon: keep a copy of the const buffer in VideoCommon
...
The upload in the backend isn't done, it's just pushed by the mostly removed SetMulti*SConstant4fv.
Also no optimizations was done on VideoCommon side, but I can start now :-)
Sorry for the hacky way, but I think this is a nice (working) snapshot for a much bigger change.
2013-10-12 20:29:56 +02:00
0753ce5bda
ogl: use GL_RGBA instead of GL_RGBA8
...
8 bit per pixel is _everywhere_ the default, so we don't need to define it explicitly.
Also we don't rely on exact 8 bit resolution.
2013-10-12 16:34:06 +02:00
0556193442
Build fix for previous commit.
2013-10-11 21:45:44 -05:00
cf7521dc36
[Android] Make Tegra 4 output graphics that aren't visually appealing.
2013-10-11 21:42:07 -05:00
414ed6ef63
C.K. should fix his website before throwing stones at obsolete xml.
2013-10-09 23:56:16 +13:00
fbcc41c18e
Fix references for OGL, SW and D3D.
2013-10-09 23:49:00 +13:00
4a0745799f
Missed OGL includes apparently.
2013-10-08 18:03:33 +13:00
eb480a406c
Fix Windows vcxproj files.
2013-10-08 17:52:18 +13:00
9920362581
Fix MSVC project files
...
yay relative paths
2013-10-07 18:50:21 -04:00
a7c7208103
Put Plugins/ in Core/, rename to VideoBackends
2013-10-07 10:37:01 -04:00
Tony Wasserka