Commit Graph

2479 Commits

Author SHA1 Message Date
Paul Olszewski c5ef249c4b Make the common "Failed to enumerate outputs" message much more useful.
Now it includes its most common cause, a simply-worded solution, and an exclamation point.
2014-06-20 15:51:54 -05:00
degasus 924ad1ee9f LightingShader: hard code const variable 2014-06-19 16:46:53 +02:00
degasus d93f2973f7 PixelShader: use the vertex const buffer for ppl 2014-06-19 16:33:33 +02:00
degasus 027baad73b VideoCommon: use the Light struct in XF memory 2014-06-19 16:33:29 +02:00
Tony Wasserka e642c8d0c1 Merge pull request #497 from Armada651/osd-scaling
D3D: Reset viewport before drawing the OSD.
2014-06-19 15:26:10 +02:00
Lioncash ce54c1e571 Kill off replaceable usages of s[n]printf. 2014-06-18 19:53:38 -04:00
Jules Blok 6c52ec93b7 D3D: Reset viewport before drawing the OSD. 2014-06-16 23:34:54 +02:00
Lioncash f05d3f6e5d Use only section-based ini reading. 2014-06-16 01:31:23 -04:00
Pierre Bourdon 020b4fde1e Merge pull request #492 from Armada651/master
Remove EmuWindow
2014-06-15 14:16:53 +02:00
Armada f2759ffe65 Remove EmuWindow.
All it did was raise complexity.
2014-06-15 00:49:49 +02:00
Tony Wasserka d7736ac714 Merge pull request #445 from magumagu/video-dead-code
Video backends: remove dead code.
2014-06-13 22:38:22 +02:00
Paul Olszewski 5d793881b0 Fix the capitalization of "GameCube" throughout the project. 2014-06-08 11:24:49 +09:00
Ryan Houdek d2e4c2fc50 Fix OpenGL ES version detection.
Mesa report GLES version as "3.0" not "3.00"
Spec mandates X.Y versioning scheme, doesn't say how long the decimal place must be.
2014-06-06 21:21:35 -05:00
degasus 9566dcf0da OGL: speed up the EFB cache
gcc doesn't optimize this loops with -O2, so using memset now.
A flag to skip the clear funktion was added as the cache is already cleared most of the time.
2014-06-05 14:53:09 +02:00
degasus d9eafd94a2 OGL-StreamBuffer: replace size_t with u32
Yes, this matters.
We align our buffer all the the time which needs a division. u64 divisions are just so slow.
2014-06-05 13:33:50 +02:00
degasus 606e46ba8d OGL-StreamBuffer: move alignment to caller
Only the caller know if alignment is needed at all, so it can be skipped now.
2014-06-05 13:32:13 +02:00
degasus 02a4e3d70f OGL-StreamBuffer: make the SLOT calculation much easier
The size of the buffer is now power of 2, so we can use a shift instead of a division.
This was at about 2% of the global CPU usage.
2014-06-05 13:32:13 +02:00
degasus d81d2e8915 OGL-StreamBuffer: allocate fences in StreamBuffer directly 2014-06-05 13:32:13 +02:00
degasus 0688cfdaef OGL-StreamBuffer: don't use coherent mapping
Coherent mapping seems to be much slower on fermi gpus.
2014-06-05 12:18:44 +02:00
magumagu 0aecd9504e Video backends: remove dead code. 2014-06-01 01:56:09 -07:00
Lioncash 49b0eef393 Remove the min/max functions in CommonFuncs.
The algorithm header has the same functions.
2014-05-29 21:44:41 -04:00
shuffle2 329fcad04f Merge pull request #421 from CarlKenner/MissingSpace
Fix error message when D3D11 HResults fail.
2014-05-29 14:06:18 -07:00
CarlKenner 361d53fdc7 Fix error message when D3D11 HResults fail.
Prevents showing the wrong function name by putting a space between the function name and "Failed".
Also fixes the capitalization.
2014-05-27 00:45:26 +09:30
Lioncash 1583ce9363 Use strings instead of arbitrary buffers for video statistics 2014-05-25 21:11:29 -04:00
shuffle2 b58753bd69 Merge pull request #370 from Sonicadvance1/remove_specialized_memcmp
Removes ZeroFrog's "optimized" memcpy and memcmp functions.
2014-05-22 13:02:11 -07:00
degasus c1b6fcc00b ogl: pixel format shader without resolving
v2: Don't use std::to_string as this function is broken on android.
2014-05-19 09:29:40 +02:00
degasus e150d307a6 ogl: use ARB_texture_multisample for msaa 2014-05-19 09:21:44 +02:00
degasus fab78c2dff ogl: add ARB_texture_multisample 2014-05-19 09:21:44 +02:00
degasus 775858b6bc ogl: drop NV_framebuffer_multisample_coverage 2014-05-19 09:21:44 +02:00
degasus afea848e3b ogl: drop csaa support 2014-05-19 09:21:44 +02:00
Tony Wasserka 6950f533ae Merge pull request #355 from magumagu/gx-missing-opcode
Opcode decoding: handle missing opcodes 0x88 etc.
2014-05-18 11:12:06 +02:00
Ryan Houdek a4bb0dafb4 Removes ZeroFrog's "optimized" memcpy and memcmp functions.
These were only compiled in on Windows and x86_32.
They provided "optimized" copies and compares based on blocksizes for the AMD Athlon and Duron CPU families.
The code was taken from something that AMD provides with a as-is license.
Just get rid of this crap.
2014-05-17 18:03:31 -05:00
Tony Wasserka fc34d5a130 Merge pull request #360 from magumagu/lighting-rounding
Video backends: fix rounding in lighting computation.
2014-05-17 21:06:31 +02:00
magumagu 9b82d72070 Video backends: warn on usage of GL_DRAW_QUADS_2.
It's not normally used, so if it shows up, it could indicate a CPU emulation
bug.
2014-05-17 11:55:32 -07:00
Tony Wasserka 0fac17da33 Merge pull request #269 from magumagu/swbackend-xfregisters
SW backend: use VideoCommon XFRegisters struct.
2014-05-17 10:40:57 +02:00
magumagu 1357277f40 Video backends: mass-replace "xfregs" with "xfmem". 2014-05-16 18:58:07 -07:00
magumagu 8f5342c442 Video backend: merge global var xfmem into xfregs.
There isn't really any reason to keep them separate.
2014-05-16 18:55:31 -07:00
magumagu 818c89313e Video backends: unify xfregs/xfmem structures.
Removes the duplicate swxfregs global variable/struct from the software
backend in favor of the ones from VideoCommon.
2014-05-16 18:55:30 -07:00
magumagu 8b82cea704 Video backends: fix behavior of "konst" TEV inputs.
Also fixes TEVCOLORARG_HALF.

Values verified to match hardwarere.
2014-05-16 12:19:35 -07:00
Tony Wasserka b8817267f4 Merge pull request #366 from Jezze/vertex
OGL/VertexManager: Remove unused variable.
2014-05-16 16:18:14 +02:00
Tony Wasserka 25e8dc0aed Merge pull request #354 from magumagu/gx-primitive-mask
Opcode decoding: 0xC0 isn't a valid command.
2014-05-16 15:59:59 +02:00
Jens Nyberg f742c5a057 OGL/VertexManager: Remove unnused m_CurrentVertexFmt 2014-05-13 23:59:08 +02:00
magumagu 9e4eeb3b9b Video backends: fix rounding in lighting computation.
For whatever reason, the hardware doesn't do a full divide by 255, but
instead uses an approximation with shifting, similar to the way it is done
in TEV.
2014-05-11 12:53:02 -07:00
Shawn Hoffman 17577affba D3D: Don't pass D3D10_SHADER_WARNINGS_ARE_ERRORS to the compiler in debug builds.
For quite a while this has been causing integer division to generate a warning as error, blocking shader compiling. This means probably no one has even been running D3D in debug builds...
I tried disabling the warning with a #pragma, but it doesn't seem to apply when this flag is used.
2014-05-10 22:12:54 -07:00
magumagu 39d439fc48 Opcode decoding: handle missing opcodes 0x88 etc.
Hardware testing shows that they do the same thing as the 0x80 family of
opcodes: they draw quads.
2014-05-10 20:33:28 -07:00
magumagu 369c0c4ce2 Opcode decoding: 0xC0 isn't a valid command.
Fix our opcode decoders to handle this appropriately.
2014-05-08 15:49:19 -07:00
Tony Wasserka b4e1ac5f08 Merge pull request #185 from degasus/shader-cleanup
Shader cleanup
2014-05-06 11:37:11 +02:00
magumagu bca0b7b543 OpenGL: delete unused function parameter in TextureConverter.
(While I'm here, also mark some functions static.)
2014-05-05 10:56:36 -07:00
degasus 25b8edd2a6 ogl: fix signed vs unsigned comparison warning 2014-05-05 17:06:36 +02:00
Ryan Houdek 2d8cfb89d7 Changes posmtx vertex attribute to integer.
This makes it so we don't need to do some dumb casting from float to integer in our shaders.
Only tested in OpenGL, needs to be tested in D3D.
2014-04-30 19:11:06 -05:00
Ryan Houdek 99338daa8f Fixes glVertexAttribIPointer on GLES.
We need to pull in function pointers for OpenGL 3.0 in order to use glAttribIPointer.
This isn't too big of an issue, and this code will be gone in the future when we change over to libepoxy.
Just need to push code upstream to libepoxy to support Android with GLES and GL first.
2014-04-30 19:11:06 -05:00
Tony Wasserka a40ea4e26a Merge pull request #236 from magumagu/d3d11-fix-peekz
D3D11: Use appropriate shader for PEEK_Z.
2014-04-27 16:09:02 +02:00
Tony Wasserka fe65474cc4 Software renderer: Update a reference link. 2014-04-24 00:42:08 +02:00
Pierre Bourdon d8ca861fec Merge pull request #287 from Tilka/unused_variable
Fix "warning: unused variable 'skipFrames'"
2014-04-19 09:03:19 +02:00
Tillmann Karras d523d2002b Fix "warning: unused variable 'skipFrames'" 2014-04-19 04:59:37 +02:00
Ryan Houdek 92ec49ac9f Change to ARM's naming convention in DriverDetails.
This matches how ARM handles their naming in their drivers for different models.
Really it's that way because both Mali-T6xx and Mali-T7xx fall under Midgard.
While everything else (except Mali-55) fall under Utgard.
2014-04-18 21:06:32 -05:00
magumagu 648b9865d8 D3D11 backend: fix rounding in texture encoder.
We need to explicitly round when converting colors from float to uint
because multiplying a normalized float by 255 might not result in a whole
number.  (The exact result here may vary depending on your
drivers/hardware.)

Ideally, we shouldn't be using floating point here, but fixing that is a
much more complicated patch.

Fixes gxtest TEV tests using Intel HD 4000.
2014-04-15 23:36:05 -07:00
magumagu 685d612c8c Software backend: don't skip red component in TEV. 2014-04-15 14:05:12 -07:00
magumagu 5e1c6aba33 Software backend: make TEV rounding match hardware.
Formulas stolen from gxtest.  (Not sure how "==" got turned into "!=", but
I'm pretty confident the patched version is correct.)
2014-04-15 14:04:46 -07:00
Matthew Parlane 4e0b7260b6 Merge pull request #263 from Sonicadvance1/DetermineMaliVersion
Add Mali driver version check and support of checking for Mali-T7xx
2014-04-14 19:20:04 +12:00
magumagu 812ff4686b OpenGL backend: remove useless header Globals.h.
The header has no content, so it can can just be deleted.
2014-04-12 19:25:37 -07:00
degasus 96ffbe345d VideoSoftware: remove const memory usage of DebugUtil 2014-04-12 13:32:53 +02:00
magumagu f18a3cc650 OpenGL config: clear backend_info.Adapters on init
Fixes a minor UI glitch where if you switch from Direct3D to OpenGL, the
OpenGL config page would appear to have an adapter choice available.
2014-04-12 00:17:36 -07:00
Ryan Houdek a9fa49f34d Support checking for the Mali-T7xx line of GPUs.
They are similar enough that they will share bugs with their drivers, so make them fall under the same Mali-Txxx umbrella of bug issues.
If there is ever a need in the future for having separate bugs depending on family, we can support that then.
2014-04-11 23:46:44 -05:00
Ryan Houdek ed67cc3fb2 Add the ability to determine the Mali driver version.
This is the only way we can determine the video driver version with mali.
Really it's a good thing that they only push driver updates once every two years, makes it easy to determine what driver anybody is running.
2014-04-11 23:38:40 -05:00
magumagu fd9c1fa746 VideoBackend: remove unused config vars.
No point to keeping around variables which are always "true".
2014-04-11 14:53:12 -07:00
magumagu 76d7c1eb9c D3DBackend: Don't recompute ID3D11Layout.
CreateInputLayout requires a shader as an input, but it only cares about
the signature; we don't need to recompute it for different shaders with
the same inputs.
2014-04-11 13:13:01 -07:00
Tony Wasserka 306b9afd1e Merge pull request #224 from magumagu/swrender-deletepixelfork
Software backend: Delete forked PixelEngine.
2014-04-11 20:01:23 +02:00
magumagu d0f89b2b63 SWBackend: Fix code style. 2014-04-05 13:08:00 -07:00
Matthew Parlane 13119e6755 Merge pull request #240 from Sonicadvance1/GLSLES310_binding
Add initial support for GLSL ES 3.10.
2014-04-04 08:43:20 +13:00
Ryan Houdek 3251d78f89 Add initial support for GLSL ES 3.10.
GLSL ES 3.10 adds implicit support for the binding layout qualifier that we use.
Changes our GLSL version enums to bit values so we can check for both ES versions easily.
2014-04-03 00:46:09 -05:00
Ryan Houdek ca9ee3586f Merge pull request #227 from magumagu/swbackend-fix-shaders
SW backend: make shaders work on Intel/Windows.
2014-04-02 14:51:14 -05:00
magumagu f9d2f7e88c D3D11: Use appropriate shader for PEEK_Z.
Trying to use GetDepthMatrixProgram outside of
TCacheEntry::FromRenderTarget is a bad idea, so don't.  Instead, use a
shader which only copies the input.

Fixes lens flare depth test in Twilight Princess. See
http://code.google.com/p/dolphin-emu/issues/detail?id=5999 .
2014-03-30 19:50:53 -07:00
Pierre Bourdon 9b03178673 Merge pull request #222 from comex/more-clang-fixes
More clang fixes
2014-03-30 13:24:08 +02:00
comex 92dd498fa7 Fix harmless warnings. 2014-03-30 01:40:11 -04:00
magumagu bdcd5ba39b SW backend: make shaders work on Intel/Windows.
Apparently the Intel shader compiler doesn't implement "#if" correctly...
so use "#ifdef" instead.
2014-03-29 13:10:43 -07:00
magumagu 0661efea84 Software backend: Delete forked PixelEngine.
Mostly just zapping a bunch of duplicated code; the only interesting thing
going on here is the changes to the performance counter implementation.
2014-03-29 12:07:20 -07:00
Pierre Bourdon 664c8d30a0 Remove all trailing whitespaces from our codebase. 2014-03-29 11:05:44 +01:00
Tony Wasserka 1dead05cae Software renderer: Properly calculate tev combiner output.
As pointed out by dolphin-emu/hwtests@461476112.
2014-03-26 00:23:58 +01:00
Tony Wasserka a8c8db8da7 Software renderer: Use color combiner configuration for alpha combiner compare mode inputs.
As pointed out by dolphin-emu/hwtests@f684f2498.
2014-03-26 00:23:58 +01:00
Tony Wasserka 16105db709 BPMemory: Make use of BitField in a number of structures. 2014-03-25 23:57:58 +01:00
Tony Wasserka 8941f19cdb BPMemory: Expose the pixel_format and zformat fields in PE_CONTROL as enumerations. 2014-03-25 23:57:58 +01:00
Tony Wasserka 77a7bab5ae BPMemory: Use the new BitField class in two selected structures. 2014-03-25 23:57:57 +01:00
Ryan Houdek 89efec6109 Merge pull request #167 from neobrain/ogl-efbpokes
Implement EFB pokes in the OpenGL backend.
2014-03-20 15:25:56 -05:00
Jens Nyberg ae260e55e4 OGL/VertexManager: Do not check if g_nativeVertexFmt is zero
The variable is already dereferenced both before and after this
check which means that if this variable would ever be zero it would
have crashed dolphin already.
2014-03-18 21:33:30 +01:00
Jens Nyberg 80421156b6 OGL/VertexManager: Minor cleanup of if case 2014-03-18 21:33:30 +01:00
Tillmann Karras 7e39cf3b0d .gitignore: fix the build directory pattern 2014-03-17 02:55:56 +01:00
Tillmann Karras 2fcaca0603 More range-based loops and overrides 2014-03-17 02:55:55 +01:00
Pierre Bourdon 8d679e76d2 Merge pull request #164 from lioncash/cstr-cull
Kill off some usages of c_str.
2014-03-15 00:57:56 +01:00
Tony Wasserka d946e4e238 OpenGL: Implement color and z pokes. 2014-03-14 23:39:52 +01:00
Tony Wasserka 3a6389992e PixelShaderGen: Treat UV coordinates like S17.7 integers (they're still stored as float, though). 2014-03-14 22:31:30 +01:00
Tony Wasserka 0238a56816 PixelShaderGen: Change indirect texture matrix uniforms to use integers. 2014-03-14 22:31:18 +01:00
Tony Wasserka cff952c397 PixelShaderGen: Use integer math for indirect tev stage texcoord calculation. 2014-03-14 22:30:27 +01:00
Tony Wasserka fa77e1d2b6 PixelShaderGen: Use integer math for alpha testing. 2014-03-14 22:26:48 +01:00
Tony Wasserka 2af50f04c2 OGL: Force highp for integers. 2014-03-14 22:26:26 +01:00
Tony Wasserka 032c920247 OGL: Remove some dead code. 2014-03-14 22:26:26 +01:00
Lioncash a82675b7d5 Kill off some usages of c_str.
Also changes some function params, but this is ok.
Some simplifications were also able to be made (ie. killing off strcmps with ==, etc).
2014-03-14 13:51:23 -04:00
Matthew Parlane 31cfc73a09 Fixes spacing for "for", "while", "switch" and "if"
Also moved && and || to ends of lines instead of start.
Fixed misc vertical alignments and some { needed newlining.
2014-03-11 00:35:07 +13:00
Tillmann Karras d802d39281 clang-modernize -use-nullptr
and s/\bNULL\b/nullptr/g for *.cpp/h/mm files not compiled on my machine
2014-03-09 21:14:26 +01:00
Tillmann Karras f28116b7da clang-modernize -add-override 2014-03-09 21:12:01 +01:00
Tillmann Karras c89f04a7c5 clang-modernize -loop-convert
and some manual adjustments
2014-03-09 21:11:59 +01:00
Tillmann Karras d461b3f33c SW renderer: add missing ClearCurrent()
courtesy of degasus
2014-03-06 01:53:29 +01:00
Ryan Houdek 4f02132f93 Make our architecture defines less stupid.
Our defines were never clear between what meant 64bit or x86_64
This makes a clear cut between bitness and architecture.
This commit also has the side effect of bringing up aarch64 compiling support.
2014-03-04 09:36:59 -06:00
Tony Wasserka 1bdf232fed videosoftware: More coding style fixes. 2014-03-03 19:03:15 +01:00
Tony Wasserka c6c6d20014 videosoftware: Provide a more elaborate comment on the FifoPlayer support hack. 2014-03-01 18:52:19 +01:00
Scott Mansell 17231418ef videosoftware: Added hack to bypass xfb just so fifoplayer works.
Fifoplayer depends on the old behaviour of videosoftware (and the other
hardware backends in non virtual/real xfb modes) where the framebuffer
gets rendered directly to the screen.

Really fifoplayer should call BeginFrame/EndFrame when it finished
rendering a frame, but adding this hack back in is simpler.
2014-03-01 18:45:24 +01:00
Tillmann Karras 7c93f2dc23 Fix the Windows build (broken in 315a8ba) 2014-03-01 01:33:19 +01:00
Tillmann Karras 315a8ba1c0 Various changes suggested by cppcheck
- remove unused variables
- reduce the scope where it makes sense
- correct limits (did you know that strcat()'s last parameter does not
  include the \0 that is always added?)
- set some free()'d pointers to NULL
2014-02-28 12:43:20 +01:00
degasus f628695d31 comment fixes 2014-02-26 12:48:52 +01:00
degasus aaaa5af0b2 remove (ATTR|VARY)(IN|OUT) macros 2014-02-26 11:37:29 +01:00
degasus 7f539b6033 ogl: optimize real xfb a bit
Both nvidia + mesa seems not to optimize x / (2**n) to x >> n, so we do it ourself.
2014-02-26 11:37:28 +01:00
Pierre Bourdon 83b7bb64aa Make Common/ mostly IWYU clean (and fix errors in rest of the project detected by this change). 2014-02-22 23:37:29 +01:00
Pierre Bourdon 6d8df311a3 Merge pull request #88 from lioncash/relative-includes
Relative includes
2014-02-20 02:08:44 +01:00
Pierre Bourdon 425f9dcd51 Fix more header sorting issues in VideoBackends/ (now check-includes clean). 2014-02-20 01:01:11 +01:00
Pierre Bourdon a18e8249a4 Merge pull request #79 from Tilka/nits
Silence some Windows compiler warnings
2014-02-18 14:19:38 +01:00
Lioncash 2afe215271 Convert all includes to relative paths. 2014-02-18 02:19:10 -05:00
Lioncash 3fd87a7636 Second and final pass of clearing out tabs. 2014-02-17 02:19:41 -05:00
Pierre Bourdon b18a33377d Merge pull request #55 from Sonicadvance1/GLExt-InitArray
Change OpenGL extension initialization in to a big array
2014-02-17 02:16:16 +01:00
Ryan Houdek 6b5f6ddaa1 Merge pull request #82 from lioncash/vertical-alignment
Fix some vertical alignments
2014-02-16 19:12:42 -06:00
Lioncash 6c4ee1753a Fix some vertical alignments
ie. uses spaces for alignment.
2014-02-16 20:12:05 -05:00
Ryan Houdek eae9d47c3c Change OpenGL extension initialization in to a big array
This is a reasonable chunk of changes and moves from multiple initialization functions in to an array initialization.
2014-02-16 17:40:34 -06:00
Tony Wasserka de5bfd0bce Merge pull request #37 from degasus/VideoCommonApiFixes
VideoCommon API cleanups
2014-02-16 22:08:28 +01:00
Pierre Bourdon 92f8d93e96 Remove the old MMIO access "interface". 2014-02-16 19:22:40 +01:00
Pierre Bourdon f8f14c83a3 MMIO: Port the SW CP/PE MMIOs to the new interface.
Migration is now complete.
2014-02-16 19:22:40 +01:00
Pierre Bourdon 4129b30494 MMIO: Port the VideoCommon CP MMIOs to the new interface (and provide framework for other video related mappings). 2014-02-16 19:22:40 +01:00
Tillmann Karras 0d6ab2c658 Silence some Windows compiler warnings
by adding explicit type casts.
2014-02-16 16:59:45 +01:00
degasus 647aad0a19 inline SetViewport into VertexShaderManager 2014-02-15 21:09:42 +01:00
degasus d5f1f0d4a9 merge some common parts of Swap() into VideoCommon 2014-02-15 11:33:43 +01:00
degasus 3551259c7a use EFBRectangle for scissor rect
This one is backend independed. The backend should recalc such things on their own.
2014-02-15 11:33:43 +01:00
degasus 1f4219b5b4 move perfquery enable checks into videocommon (caller side) 2014-02-15 11:33:43 +01:00
degasus 5a660c27bc rename UpdateViewport to SetViewport like all others setters in RenderBase.h 2014-02-15 11:33:43 +01:00
degasus 3cd6918dec fix ogl video config crash
This will happen when playing on any other backend than ogl which have a non-trival GLInterface::GetMode() method.
2014-02-15 11:33:43 +01:00
degasus e5318d2624 move shared parts from VertexManager::vFlush into VideoCommon 2014-02-15 11:33:43 +01:00
Lioncash 655d22512b Kill off some usages of the ArraySize macro.
This required the use of std::array in some cases.
2014-02-15 02:43:54 -05:00
Tillmann Karras 404624bf0b Turn loops into range-based form
and some things suggested by cppcheck and compiler warnings.
2014-02-13 09:05:50 +01:00
lioncash d2038049f5 Replace all include guard ifdefs with "#pragma once" 2014-02-10 18:07:16 -05:00
Ryan Houdek 8d25e12085 Merge pull request #54 from lioncash/cleanup
Cleanup mismatching struct/enum indentations.
2014-02-09 19:26:15 -06:00
Pierre Bourdon 28b5c8be47 Merge pull request #53 from lioncash/remove-another-xchg
Remove function Xchg from SWStatistics.cpp.
2014-02-10 02:01:21 +01:00
Lioncash fc30597f7a Remove function Xchg from SWStatistics.cpp. Like the one previous, this can be replaced with std::swap 2014-02-09 19:55:44 -05:00
Lioncash ebb48d019e Clean up some struct indentations
Also cleaned up the indentations of some variable declarations.
2014-02-09 19:40:11 -05:00
Lioncash 40182a48a5 Cleanup enum indentations. 2014-02-09 16:16:10 -05:00
Ryan Houdek 6a5cd02629 Cleanup GLExtensions on how it fails.
If there is an issue with a reported extension, disable it instead of failing out entirely.
Fixes an issue with buffer_storage that I had overlooked as well.
2014-02-08 19:50:12 -06:00
Ryan Houdek 9f91769def Improve GLExtensions compile time.
This changes from using logical and to bitwise and, which causes the compile time to drop from an absurd amount of time to around five seconds on my
crappy laptop.
2014-02-08 15:04:17 -06:00
Tony Wasserka af24ed782d Merge pull request #14 from degasus/uboWorkaroundRemove
OGL: Remove non-UBO code path.
2014-02-04 14:05:55 -08:00
Pierre Bourdon 8ab6ed4b49 SWCommandProcessor: fix the CPReg structure fields
This structure fields should match byte-to-byte the layout of MMIO registers:
it is addressed using the MMIO reg address when doing a CP MMIO read. This was
unfortunately not the case, causing CP reads to be mostly broken with the
software renderer.
2014-02-04 01:16:14 +01:00
degasus 6089e4470a OGL: remove ubo workaround
This was only keeped for some broken mesa versions. Meanwhile most used versions should be fixed for almost a year.
2014-02-01 22:33:45 +01:00
Tony Wasserka 3dd31fe22b Merge pull request #11 from degasus/VertexLoaderCleanup
Vertex loader cleanup.
2014-01-31 06:13:26 -08:00
degasus 010a0d481a VideoCommon: remove Cache Displaylist
This option was known to break every second game and only boost a bit.
It also seems to be broken because of streaming into pinned memory and buffer storage buffers.

v2: also remove dlc_desc
2014-01-31 07:30:55 +01:00
degasus a65162f1cd PortableVertexFormat: use AttributeFormat for posmtx attribute format 2014-01-31 07:19:34 +01:00
degasus 6c59b691b0 PortableVertexFormat: use AttributeFormat for texcoord attribute format 2014-01-31 07:19:34 +01:00
degasus ef2d6e7d53 PortableVertexFormat: use AttributeFormat for color attribute format 2014-01-31 07:19:34 +01:00
degasus b38ef39ab7 PortableVertexFormat: use AttributeFormat for normal attribute format 2014-01-31 07:19:34 +01:00
degasus 210f4f3e55 PortableVertexFormat: add a struct which hold all needed information for every vertex and use this for position
atm, position attribute is hardcoded both in VertexLoader and in backends.

v2: fix coding style + cleanup lookup table
2014-01-31 07:19:25 +01:00
degasus 02d1d8e6a0 NativeVertexFormat: swap unsigned / signed formats to match GX order 2014-01-30 11:12:10 +01:00
Ryan Houdek 99b6c82ac3 [Android] Fix Adreno v53 development drivers rotating framebuffer
Older Qualcomm drivers rotated the framebuffer 90 degrees and this fix didn't work.
Now for some obscene reason it rotates a full 180 degrees.
This can at least be worked around by flipping around the image on our end.
2014-01-29 16:39:45 -06:00
degasus b1290a8630 OGL: remove version check for buffer_storage on windows
On Windows, nvidia don't give us their driver version, so we can't workaround any issues.
As buffer_storage is broken on some drivers, we wanted to disble it for them.
So we can't.

Luckyly only "some" released driver versions are affected as this extension is only available since some months. Let's hope that nobody have to use one of this driver version, else they will get a black screen ...
2014-01-28 15:15:26 +01:00
crudelios 9b6c6fa9e4 BBox: Changed the rounding again, the old one fixed Paper Mario but had bugs in Mickey's Magical Mirror. This change fixes the glitches in both games.
Also fixed some compiler warnings.
2014-01-26 13:21:22 +00:00
degasus d3fd0eddbb OSX: don't avoid unsync mapping on nvida gpus just because the windows driver doesn't like it
OSX has their own driver, so performance issues aren't shared with the nvidia driver (unlike the closed source linux and windows nvidia driver). So now they'll also use the MapAndSync backend like all other osx drivers.

fixes issue 6596

I've also cleaned up the if/else block selecting the best backend a bit.
2014-01-26 11:00:29 +01:00
Scott Mansell dd42af9a7c Videosoftware: Fix memory cleanup code. 2014-01-25 11:06:18 +13:00
Ryan Houdek fd8757a64b Fix OpenGL 2.1 devices that support everything we need.
The only two devices that do this are Mesa software rasterizer and Intel Ironlake(With a few hacks).
Basically since it doesn't support OpenGL 3.0, it can't grab the version the new way.
So failing that, it sets to GL 2.1, and continues.

Further along, on Ironlake at least, it tries grabbing the extensions the new GL 3.0 way and fails.
So have a fallback that grabs the extensions string the old way, in probably the most elegant way possible.
2014-01-23 16:02:53 -06:00
degasus 65121cf9a9 OpenGL: remove unused OpenGL headers 2014-01-23 18:52:57 +01:00
degasus 1ff681a412 D3D: move streaming buffer fallback into D3D backend
Neith OGL nor VideoCommon doen't use it, so there is no need to have it in VideoCommon.
2014-01-23 15:27:18 +01:00
degasus ff002320a5 OpenGL: Stream vertices + indices 2014-01-23 15:12:31 +01:00
degasus 128fcdac26 OpenGL: refactor all of our StreamBuffers
The old way was to use big switch/case statements based on a type of buffer.
The new one is to use inheritance.

This change prohibits us to change the buffer type while running, but I doubt we'll ever do so.
Performance should also be a bit better. Also a nice cleanup.

Added some comments about this different kind of buffers.
2014-01-23 15:12:31 +01:00
degasus be1fee6d74 OpenGL: change StreamBuffer in a streaming way
This is a bit slower on map_and_* because of flushing and _very_ much slower on buffer(sub)?data because of a new memcpy.
But this design allow us to decode directly into a gpu buffer, eg vertexloader will profit :)
2014-01-23 15:12:31 +01:00
Ryan Houdek 07db7520bf [GLExt-Cleanup] This cleans up some extra bits unneeded in the extension headers
gl.h and glext.h provide most of the function pointer typedefs and defines for extensions and core features.
The only one it doesn't provide is GL 1.1 function typedefs, but this is to be expected.
If anything needs defines or typedefs in their header in the future, that's as easy as before.
2014-01-23 07:11:13 -06:00
degasus ebbf1d392b VideoCommon: merge trivial parts of VertexManager::Flush 2014-01-21 10:47:00 +01:00
degasus 60632fda6f OpenGL: remove small optimization
This one was introduced to reduce the glBindTexture and glActiveTexture calls. But it was quite a bit of logic and only an improvment on uploading/creating a texture, which is done rarely.
2014-01-21 10:34:48 +01:00
degasus fe02833f13 OpenGL: fix our ubo workaround when blend_func_extended is missing 2014-01-21 10:03:05 +01:00
Scott Mansell 8b2c540544 Finally Merge branch 'videosoftware-xfb'
This adds xfb support to the videosoftware backend, which increases it's
accuracy and more imporantly, enables the usage of many homebrew apps
which write directly to the xfb on the videosoftware backend.

Conflicts:
	Source/Core/VideoBackends/Software/SWRenderer.cpp
	Source/Core/VideoBackends/Software/SWmain.cpp
2014-01-21 00:10:00 +13:00
Scott Moreau 2c8340e1dc Move GLInterface.h into GLInterface directory 2014-01-20 00:46:21 -07:00
Ryan Houdek 683dbc09ac Stop building GLExtensions.cpp twice(One in GL, one in software). We don't need to build it twice, this'll save a bit of time in the build process.
Also a bit of spacing cleanup.
2014-01-19 11:37:37 -06:00
Ryan Houdek 5d26bf6d9d Rename our GLInterface class function 'GetProcAddress' in order to not have clashing function names due to Windows. 2014-01-18 14:18:32 +00:00
Ryan Houdek bea484e12f Move Win32 specific function grabbing fallback to WGL.cpp. Fixes issue 6964. 2014-01-18 14:10:24 +00:00
Ryan Houdek 839df31347 Merge of GL-AutoChoose.
This branch is the final step of fully supporting both OpenGL and OpenGL ES in the same binary.
This of course only applies to EGL and won't work for GLX/AGL/WGL since they don't really support GL ES.
The changes here actually aren't too terrible, basically change every #ifdef USE_GLES to a runtime check.

This adds a DetectMode() function to the EGL context backend.
EGL will iterate through each of the configs and check for GL, GLES3_KHR, and GLES2 bits
After that it'll change the mode from _DETECT to whichever one is the best supported.
After that point we'll just create a context with the mode that was detected
2014-01-18 04:11:59 +00:00
degasus 5a599d472e Merge branch 'GLExtensions' 2014-01-17 16:49:51 +01:00
degasus 6b01839525 VideoCommon: merge triangle+list+point index buffers
We are used to render them out of order as long as everything else matches, but rendering order does matter, so we have to flush on primitive switch. This commit implements this flush.
Also as we flush on primitive switch, we don't have to create three different index buffers. All indices are now stored in one buffer.

This will slow down games which switch often primitive types (eg ztp), but it should be more accurate.
2014-01-17 16:34:53 +01:00
degasus e932a349e8 [GLExtensions] fixup for missing changes on rebase 2014-01-17 16:10:10 +01:00
Ryan Houdek 29e0a90b88 [GLExtensions] Rename internal GetProcAddress function since it clashes with the global Windows function. Fix Windows function pointer grabbing. 2014-01-17 16:06:46 +01:00
Ryan Houdek 6cdb05b633 [GLExtensions] OpenGL 3.0 also added GL_ARB_map_buffer_range to core. 2014-01-17 16:06:23 +01:00
Ryan Houdek a5ffe9932a [GLExtensions] Future proof ourself by putting the default: instance on the top, so we'll grab extensions if they support something newer. Handle older GLVersions in the case they get that far. 2014-01-17 16:06:18 +01:00
Ryan Houdek 2a11fead5c [GLExtensions] Populate the extension list for OpenGL implementations that don't show core extensions. 2014-01-17 16:06:13 +01:00
Ryan Houdek 0ea6718d99 [GLExtensions] Fix OS X build. 2014-01-17 16:06:08 +01:00
Ryan Houdek 34c9a33807 [GLExtensions] Remove AGL GetProcAddress. Change dlsym to using RTLD_NEXT. Enable dlsym fallback for OS X 2014-01-17 16:06:03 +01:00
Ryan Houdek ca96274936 [GLExtensions] Make sure to link against libdl since we use it to grab GL function pointers in Linux/Android in the case the GLInterface->GetProcAddress fails. 2014-01-17 16:05:57 +01:00
Ryan Houdek 45dfa3a481 [GLExtensions] Missed a couple USE_GLES3 compile time differences. 2014-01-17 16:05:52 +01:00
Ryan Houdek 97dc20d1be [GLExtensions] Pull in all the function pointers for OpenGL 1.1, This removes the need for a couple compile time differences between GL and GLES3 mode. 2014-01-17 16:05:40 +01:00
Ryan Houdek f308b878b2 [GLExtensions] Oops. Don't just outright disable these helper functions. 2014-01-17 16:05:34 +01:00
Ryan Houdek cfb8b43b4a [GLExtensions] Don't fail out loading funciton pointers in both ES2 and ES3 modes. 2014-01-17 16:05:25 +01:00
Ryan Houdek fc1f8291d6 [GLExtensions] Make sure to initialize our function pointers with VideoSoftware as well. 2014-01-17 16:05:07 +01:00
Ryan Houdek 17955fa025 [GLExtensions] Still had a GLEW lib hanging out in the CMake file for the software renderer. 2014-01-17 16:01:49 +01:00
Jack Frost f4bd7bdef0 fix windows build
add the GL include (back) to Base.props
use a similar technique to GLX.cpp (by Sonic) in WGL.cpp to get
wglSwapIntervalEXT without the WGLEW check

Conflicts:
	Source/Core/VideoBackends/OGL/OGL.vcxproj
	Source/Core/VideoBackends/OGL/OGL.vcxproj.filters
	Source/VSProps/Base.props
2014-01-17 16:01:17 +01:00
Ryan Houdek 10bd61a9d2 [GLExtensions] Dynamically pull in the GL 1.3 and 1.4 functions as well. 2014-01-17 15:56:54 +01:00
Ryan Houdek d5a7ea2041 [GLExtensions] KHR_debug on OpenGL ES 3 has a KHR suffix on their function pointers. In Desktop OpenGL there is no suffix. So handle this correctly. Make the GrabFunction macro slightly less evil, so update the init_* to reflect it. Thanks Bh44L for the suggestion. 2014-01-17 15:56:28 +01:00
Ryan Houdek d093276e93 [GLExtensions] Fix a typo in KHR_debug 2014-01-17 15:56:20 +01:00
Ryan Houdek cf8865a6e5 [GLExtensions] Add ARB_buffer_storage to negate at least one null pointer instance. 2014-01-17 15:52:34 +01:00
Ryan Houdek 71681de81a [GLExtensions] Initial code drop for GLExtensions. This drops GLEW entirely from the codebase. This has been tested on Android and Linux+ATI. Of course untested on Windows and Apple. Also untested with Linux + EGL but should be fine there. There are most likely a couple of extensions I'm missing which would result in null pointer runs but not bad for the initial commit.
Conflicts:
	CMakeLists.txt
	Externals/GLew/glew.vcxproj
	Externals/GLew/glew.vcxproj.filters
	Source/Core/VideoBackends/OGL/CMakeLists.txt
	Source/Core/VideoBackends/OGL/GLFunctions.cpp
	Source/Core/VideoBackends/OGL/GLFunctions.h
	Source/Core/VideoBackends/OGL/GLUtil.h
	Source/Core/VideoBackends/OGL/Render.cpp
	Source/VSProps/Base.props
2014-01-17 15:50:51 +01:00
Tony Wasserka f1adc56a56 Remove vertex streaming hack.
NV has buffer_storage, AMD has pinned memory.
Both are better than that hack which shouldn't ever have been introduced in the first place.
2014-01-16 00:11:12 +01:00
degasus 5e5db9fbc6 VideoCommon: cleanup of "components" usage
This "u32 components" is a list of flags which attributes of the vertex loader are present.
We are used to append this variable to lots of vertex generation functions, but some of them don't need it at all.
2014-01-15 16:58:36 +01:00
degasus 95aa977d81 OGL: remove masking from streambuffer
We used this to disable pinned memory for index buffer, but as the detection
was reworked completely, it's just unused code.
2014-01-09 18:52:05 +01:00
degasus eb310cbd1d VideoCommon: disable efb access + perf querys on cph thread
The usual way to handle this kind of request is to rise a flag which the gpu thread polls.
The gpu thread itself either generates the result or just write zeros if disabled.
After this, it rise another flag which says that this work is done.

So if disabled, we still have the cpu-gpu round trip time. This commit just returns 0 on the cpu thread
instead of playing ping pong...
2014-01-09 18:37:59 +01:00
Ryan Houdek cdf69adcb0 Fix for previous commit. I was supposed to use GL_VERSION, not GL_RENDERER. 2014-01-07 19:35:06 -06:00
Ryan Houdek d2e62796fc Probe the GL_RENDERER string on Nvidia to grab the driver version. 2014-01-07 18:29:04 -06:00
NeoBrainX 55717ed216 D3D: Verbosify an error message. 2014-01-06 10:31:09 +00:00
degasus c42f274e22 OpenGL: use shader 420pack if available to staticly bind ubo location
Bindung locations after compiling a shader stalls the driver. So if we manage not to bind anything after compilation, the lag would be reduced much.
2014-01-05 10:38:45 +01:00
degasus 4fff5ac90d OpenGL: drop UBO-workaround usage for efb2ram shaders
It's just brainfuck to use this workaroung there. Just fetch the uniform location like all other util shaders.
2014-01-05 09:52:26 +01:00
degasus 0f0a3cc509 ogl: clamp to edge for out of bound efb access
fixes issue 6898

OpenGL defaults are GL_REPEAT, which is even more unlikely than GL_CLAMP_TO_EDGE.
As I can't test the behavoir of the real hardware, I changed it to how it works before,
but I guess just clip the texture makes more sense.
2014-01-03 08:15:19 +01:00
Ryan Houdek 0faf696be7 Merge Fail. We don't disable BaseVertex on broken pinned memory. 2014-01-01 17:20:09 -06:00
Ryan Houdek 1118226f27 Merge branch 'master' into buffer_storage 2013-12-31 19:18:30 -06:00
Ryan Houdek 8d8b0fc884 Merge branch 'master' into buffer_storage
Conflicts:
	Source/Core/VideoBackends/OGL/Src/Render.cpp
	Source/Core/VideoCommon/Src/DriverDetails.cpp
	Source/Core/VideoCommon/Src/DriverDetails.h
2013-12-31 15:41:50 -06:00
Jasper St. Pierre 34692ab826 Remove unnecessary Src/ folders 2013-12-31 14:03:19 -05:00
Jasper St. Pierre 43e618682e Convert all vcxproj files to UNIX line endings 2013-12-31 14:03:18 -05:00
Ryan Houdek 6d63db96e9 Disable primitive restart on buggy OS X Intel HD 3000 drivers. 2013-12-30 18:26:55 -06:00
Tony Wasserka de16b7207c D3D/OGL: Add a TODO noting that we don't support GX_CULL_ALL, most notably required for accurate zfreeze emulation. 2013-12-30 20:37:59 +01:00
Tony Wasserka bbde075420 Software renderer: Add a zfreeze related TODO. 2013-12-30 20:18:53 +01:00
Ryan Houdek a5bfdbf6cd Free performance for AMD+Linux. Instead of disabling BaseVertex due to pinned_memory. Just disable pinned_memory for the ELEMENT_ARRAY_BUFFER type which has issues with baseVertex(ELEMENT_ARRAY_BUFFER)+pinned_memory. In my two tests with this, I went from 5FPS to 11FPS in one test, and 2FPS to 6FPS in another. 2013-12-28 08:00:44 -06:00
Ryan Houdek 0b31fc8f52 [buffer_storage] Temporary fix for Android/GLES3 just like how everything else is. Cleanup for this will be in a new branch. 2013-12-28 05:16:39 -06:00
Ryan Houdek 8fdcba0c06 [buffer_storage] Code formatting changes suggested by Bh44L 2013-12-28 05:15:43 -06:00
Ryan Houdek 935e1fdf99 [Android] Enable shader cache. 2013-12-28 04:55:39 -06:00
Ryan Houdek d8b7f4d73f [Android] Support grabbing OpenGL extensions and a function for checking for support. 2013-12-28 01:08:52 -06:00
Ryan Houdek 77ba051361 [buffer_storage] Add the CLIENT_STORAGE_BIT since we access the buffer more frequently on the client side than the server side. That is exactly what the hint is for. 2013-12-27 22:58:36 -06:00
Ryan Houdek d8ceb97a60 [buffer_storage] Require GLEW 1.10 which has the new OpenGL 4.4 methods. Fixes linux build. 2013-12-27 15:37:31 -06:00
Ryan Houdek ce99921c20 [buffer_storage] Implement ARB_buffer_storage. Disable it for GL_ARRAY_BUFFER due to a bug in Nvidia's drivers that causes black screen with it. 2013-12-27 10:56:03 -06:00
Ryan Houdek a87e0e7489 Remove our GLU dependency. Fix static zlib 2013-12-23 16:01:34 -07:00
Ryan Houdek e697d7a2dd [Android] Work around Qualcomm's broken garbage in their v53 drivers. This doesn't fix the issue, just a work around. This is the stupidest issue coming from Qualcomm. Now Dolphin Mobile won't crash immediately, but there are new SPS issues. 2013-12-19 17:30:39 -06:00
Ryan Houdek 945b903499 Work around AMD's broken Linux drivers when it comes to pinned memory and base_vertex usage. It seems that using pinned memory with base_vertex disabled is quicker than the other way around. 2013-12-19 09:40:13 -06:00
Ryan Houdek 8c264a3964 In the shader log message, say if the error came from a PS or VS. 2013-12-18 22:21:14 -06:00
Tony Wasserka 07820aaa9e Software renderer: Add linear interpolation of fog range adjustment factors. 2013-12-16 18:42:46 +01:00
Ryan Houdek f9ff0bc55d Have our OpenGL/ES context creation be less stupid. 2013-12-12 12:43:49 -06:00
Ryan Houdek eb3b933dd0 Remove all instances of OpenCL in the Dolphin Project. A brief history of OpenCL in Dolphin. OpenCL was originally added to the Dolphin codebase 1 month after it was released with OS X Snow Leopard in 2009. OpenCL was one of the largest group projects that Dolphin ever has had. The OpenCL texture decoder was originally aded with version 1.0 of the OpenCL spec; This version didn't have the capability of a OpenCL-OpenGL interop which would allow for uploading textures once and have it decoded directly to a OpenGL texure. This was to be worked out when the OpenCL 1.1 spec was released and allowed the interop. This work has never been done, and no one in the team is willing to work on it for various reasons. OpenCL has had the unreasonable expectation that it increases the performance of video games that require a large amount of EFB copies like NSMBW. In reality, enabling OpenCL just put the graphics card in a higher power mode which increased the game speed. This is due to the unfortunate effect of Dolphin tending to not push GPUs out of their lower frequency power savings modes. Thanks to everyone that had contributed to the OpenCL texture decoder. 2013-12-11 15:15:55 -06:00
degasus 134c89ef98 OpenGL: disable shader cache when ShaderDebugging is enabled
fixes 6859
2013-12-09 16:45:20 +01:00
degasus 42619c1d2d Merge branch 'ogl-tex2d'
Conflicts:
	Source/Core/VideoBackends/OGL/Src/TextureConverter.cpp
2013-12-09 13:04:14 +01:00
degasus 687097d4bc OGL: use integer uniforms for efb2ram texture converter 2013-12-09 12:33:50 +01:00
degasus edc879ce48 OpenGL: fix crash in revision 95aeedec19
Real xfb didn't provide any read_stride, so there is a division by zero.

This commit calculates the correct read_stride for real_xfb, so there is also no hack for texture vs xfb needed.
2013-12-03 00:09:37 +01:00
degasus 95aeedec19 OpenGL: readback efb2ram with different strides at once
This is done with a pixel buffer object. We still have to stall the GPU, but
we only do it once per efb2ram call.
As the cpu can't access the vram, it has to queue a memcpy for the gpu and
wait for the gpu to finish this copy. We did this for every cache line which
is just stupid. Now we copy the complete texture into a pbo and readback this
at once. So we don't have to wait for lots of round-trip-times.
2013-11-26 20:05:49 +01:00
degasus 1138c2e155 OpenGL: reset EFB after efb2ram FB initialization 2013-11-26 04:07:59 +01:00
degasus 0b4cb2e15f OpenGL: split real xfb + efb2ram framebuffers 2013-11-25 22:27:11 +01:00
Ryan Houdek 9dbb262aab Fix for OpenGL ES 3. 2013-11-25 15:11:06 +00:00
degasus 6750a81972 TextureConverter: Use integer math for swizzling
also move int(efb_coord) -> float(ogl_fb_coord) into WriteSampleColor
2013-11-25 15:49:13 +01:00
degasus bcb31b09d3 TextureConverter: Use gl_FragCoord instead of uv0 2013-11-25 15:01:18 +01:00
degasus 454e1dd9a2 OpenGL: attributeless rendering for efb2ram
This wasn't as easy as we now have to cache also the uniform locations.
2013-11-25 13:03:35 +01:00
degasus 6ed3f82aff OpenGL: attributeless rendering for postprocessing 2013-11-25 12:36:17 +01:00
degasus 38fe05b1df OpenGL: attributeless rendering in emulate format changes
only cleanup
2013-11-25 12:27:54 +01:00
degasus dd0b74ac15 OpenGL: cleanup efb2tex
Also use attributeless rendering. But we need the src rect, so set it by uniform.
If there is a slowdown here (I doubt as the driver likely has a fast path to update uniforms)
then we should check if this rect changes and only then update the uniform.
2013-11-25 12:19:34 +01:00
degasus b93756df87 OpenGL: drop texture_rect hack
Everything is moved to texture2d (but often in a hacky way), so we don't need this global hack any more.
2013-11-25 09:05:50 +01:00
degasus afcf0e65d1 OpenGL: fix emulate format changes for texture2d 2013-11-25 08:59:04 +01:00
degasus b904d56036 OpenGL: fix efb2tex for texture2d 2013-11-25 08:43:55 +01:00
degasus 1a3e790d9e OpenGL: fix xfb for texture2d 2013-11-25 08:38:00 +01:00
degasus e8f23af10b OpenGL: always use texture2d as efb 2013-11-25 08:32:41 +01:00
degasus 230e12ae8c OpenGL: also remove VAO from xfb convertion
We use attributeless rendering, so officially we have to bind _any_ VAO.
As the state of this VAO doesn't matter, we don't have to switch it.

Also fix an AMD issue as they don't like to render from an empty VAO.
2013-11-25 07:38:20 +01:00
Ryan Houdek da3eef1019 Fix the issue with COLOROUT not being defined anymore. Fix a issue where Mali shader compiler is idiotic in finding an overload for the mix function. 2013-11-25 00:06:29 +00:00
Ryan Houdek f292819ff5 [Android] Due to recent changes in code breaking Tegra 4 support, and also the upcoming code which will be breaking GLES2 support entirely. Taking the initiative to drop the remaining support code from the codebase in preparation for the upcoming changes. For a look at how Dolphin on Tegra 4 looked like prior and would not have been able to be fixed at all due to Tegra 4 not supporting the precision we need in our shaders; Look at this Youtube video http://youtu.be/Ga7Jc_Ote7U 2013-11-24 15:49:23 -06:00
degasus d410fe7c96 OpenGL: cleanup yuv2rgb (real xfb) workflow
We neither scale nor render from subimages, so we by using gl_Position, we don't have to generate _any_ vertices for this converting.

Also remove the glTexSubImage optimization as every driver does it when needed. But there are some workflows (eg on APU) where it's better to realloc this texture instead of a second memcpy or stall.
2013-11-24 15:56:50 +01:00
Scott Mansell 12741f6406 Add comments for anybody attempting accuracy improvements in the future. 2013-11-25 01:30:53 +13:00
Scott Mansell b5bd2ba847 OpenGL: Enable filtering for EFB to Real XFB copies.
This fixes Real XFB Jaggies in OpenGL on games which use yscaling, such
as most PAL games.

This fixes the last of the "Real XFB Macroblocking" issues for opengl,
see issue #6503
2013-11-25 01:11:42 +13:00
Scott Mansell e6b35642df Fix Desktop GLSL versions in the recent changes.
Seems OpenGL ES 3 Requires you must have an lod argument, while Desktop
versions require you must not have a lod argument if you are using a
Sampler2DRect (which doesn't do Mipmapping).
2013-11-24 22:48:10 +13:00
Ryan Houdek 531f840720 Fix OpenGL ES 3 in the recent changes. texelFetch doesn't require the lod argument in desktop GLSL versions, but in GLSL ES 3 it is a required argument. 2013-11-24 07:45:42 +00:00
degasus 994426b3dc Opengl: fix real XFB sample positions
(0,0) and (1,0) aren't accurate xfb sample positions. This fixes the image shift to the left and some blocking on higher IR.
2013-11-24 05:39:40 +01:00
Scott Mansell eef2cddfd7 Opengl: Fix opengl realxfb "macroblocking"/bluring issue.
YUYV textures should NEVER be interpolated/filtered in RGB colour space.
Use TexelFetch to always fetch an actual texture sample.

issue 6503
2013-11-24 17:15:11 +13:00
degasus 09f4439d0c VideoCommon: reorder cbufid in orderer. We've used once two times 2013-11-24 04:43:54 +01:00
degasus 7d58278b67 Merge branch 'efb2tex_alpha' 2013-11-24 04:02:38 +01:00
degasus 2bf7379a7f D3D: also fix MAX_COPY_BUFFERS
the D3D backend caches the colmat buffers. As we've created more different colmats, the maximum of this matrices must also be updated.
2013-11-24 04:00:12 +01:00
Matthew Parlane 0a31255943 Unused arguments removed from XFBSource::Draw
Thanks neo.
2013-11-24 11:33:43 +13:00
Scott Mansell 43d1678fb2 Dynamically allocate color textures.
Saves ram when the video software backend isn't being used.
2013-11-24 00:52:17 +13:00
Scott Mansell afe47ff847 Increase res of color texture to match PAL Super Smash Bros: Brawl
The pal version of SSBB has a 640x568 xfb, which is larger than the efb.
Increase the size of the static textures and put in some runtime checks
to prevent buffer overruns.
2013-11-24 00:15:08 +13:00
Scott Mansell e720ea7837 Remove c++11 feature so VC2010 can be happy. 2013-11-23 23:44:05 +13:00
Scott Mansell 786e49ed48 Merge branch 'master' into videosoftware-xfb
Conflicts:
	Source/Core/VideoBackends/Software/Src/EfbCopy.cpp
	Source/Core/VideoBackends/Software/Src/SWRenderer.cpp
	Source/Core/VideoBackends/Software/Src/SWRenderer.h
	Source/Core/VideoBackends/Software/Src/SWVideoConfig.cpp
	Source/Core/VideoBackends/Software/Src/SWmain.cpp
2013-11-23 23:20:45 +13:00
Tony Wasserka 672fa65ee7 OpenGL: Enable pinned memory even for index buffers (works for me). Big-ish speedup on AMD GPUs for streaming intensive games. 2013-11-22 18:09:52 +01:00
Matthew Parlane f4a1f183b9 std::string can't be passed to ... format. 2013-11-17 11:28:11 +13:00
Matthew Parlane ea3990a41b Don't pass char* to std::string.
Windows was fine with this :(
2013-11-17 11:25:12 +13:00
Matthew Parlane 33d8166620 Use IOFile for TextureToPng to support non-ascii
Changed save texture/screenshot uses to std::string
Removed unneeded new/delete calls when dealing with temp data.
2013-11-17 11:14:38 +13:00
Lioncash cce869ae01 [Core] Fix a mismatched dealloc in Render.cpp in the OGL backend. Should be delete[] 2013-11-16 17:05:51 -05:00
Ryan Houdek 4a9c8e6f55 Change software rasterizer screenshot code due to change in api just now. 2013-11-16 15:37:40 -06:00
Matthew Parlane 71d70d896f Api was too confusing for people. 2013-11-17 10:34:34 +13:00
Ryan Houdek 2025f00f88 Woops, vim copy and paste issue with a double include. 2013-11-16 09:41:01 -06:00
Ryan Houdek e8a4cc0f71 Screenshot capability of Software rasterizer for feature completness. 2013-11-15 22:08:08 -06:00
Matthew Parlane 3a13dfdd9b [OGL] Textures now save to PNG not TGA 2013-11-16 15:59:59 +13:00
Matthew Parlane 033ed9477e Reworked Screenshot saving.
Now OGL doesn't rely on WX for PNG saving.
FlipImageData supports (pixel data len > 3) now.
TextureToPng is now in ImageWrite.cpp/h
Video Common depends on zlib and png.
D3D no longer depends on zlib and png.
2013-11-15 13:00:38 +13:00
Jordan Cristiano 2703cae8d3 Fixed ZComploc and Zfreeze values being incorrectly saved. 2013-11-14 03:15:03 -05:00
Jordan Cristiano 0fced651a5 More warning fixes, OSX build fix. 2013-11-14 03:11:40 -05:00
Matthew Parlane 7e9b970240 Use libpng for saving images.
TODO: Needs threading done similiar to OGL backend.
Fixes issue 6779.
2013-11-14 21:02:49 +13:00
Jordan Cristiano 39a4d4329d more warning fixes 2013-11-14 02:19:15 -05:00
Matthew Parlane ca5b3b4773 atlbase not needed. Interim fix until I get png done. 2013-11-14 18:10:39 +13:00
Matthew Parlane 7b53574b68 Support texture and screenshot dumping using WIC, no XP support. 2013-11-14 00:48:02 +13:00
Matthew Parlane abc3bddb54 Revert "D3D: Reintroduce depencency on D3DX11 because it's the most straightforward way to bring back some broken features."
This reverts commit a83c239765.
2013-11-14 00:34:09 +13:00
Jordan Cristiano f96e9e1ae4 warnings and code formatting 2013-11-13 04:03:46 -05:00
Tillmann Karras 268bdf19ce Fix format string warnings 2013-11-13 04:01:16 +01:00
Tony Wasserka 22f727cc69 D3D: Use D3DX11 for taking screenshots. 2013-11-10 00:22:35 +01:00
Tony Wasserka 0b02880b76 Revert "Be less dumb."
Revert "Actually, filename really does need to be a parameter because of some random debug thing."
Revert "fix non-HAVE_WX case"
Revert "Handle screenshot saving in RenderBase.  Removes dependency on D3DX11 for screenshots (texture dumping is still broken)."

This reverts commits 00fe5057f1, 74b5fb3ab4, cd46138d29 and 5f72542e06 because taking screenshots in D3D still crashed for me so there was no point in the code changes (which I found ugly anyway).
2013-11-10 00:22:33 +01:00
Tony Wasserka 3de2ee5d46 D3D: Use D3DX for texture dumping. 2013-11-10 00:22:31 +01:00
Tony Wasserka a83c239765 D3D: Reintroduce depencency on D3DX11 because it's the most straightforward way to bring back some broken features.
The Dolphin development team is incapable of providing sufficient replacement for its previous usage in Dolphin and the advantages of dropping the dependency do not justify the removal of screenshots and texture dumping.

From now on, d3dx11.h, d3dx11async.h, d3dx11core.h and d3dx11tex.h are required to be stored somewhere in the header include path. I don't know if this is the case for anyone else than me, but I can't really say that I care after having people randomly merge unfinished branches into master.
2013-11-10 00:18:03 +01:00
degasus 274f6dd7ab ogl: check default framebuffer for msaa
default framebuffer must not be sampled, so throw a panicalert if it is
2013-11-05 17:38:48 +01:00
Matthew Parlane e15f628935 Fix {Read,Write}FileToString.
We should be using binary always.
2013-11-05 00:33:41 +13:00
comex 21610c2e54 Run code through clang-modernize -add-override to add 'override' decls. 2013-11-03 20:54:05 -05:00
comex c579637eaf Run code through the advanced tool 'sed' to remove trailing whitespace. 2013-11-03 20:54:05 -05:00
comex 965b32be9c Run code through clang-modernize -loop-convert to create range-based for loops, and manually fix some stuff up. 2013-11-03 20:54:01 -05:00
comex 00fe5057f1 Be less dumb. 2013-11-03 14:37:56 -05:00
comex 74b5fb3ab4 Actually, filename really does need to be a parameter because of some random debug thing. 2013-11-02 22:44:27 -04:00
comex cd46138d29 fix non-HAVE_WX case 2013-11-02 22:23:29 -04:00
comex 5f72542e06 Handle screenshot saving in RenderBase. Removes dependency on D3DX11 for screenshots (texture dumping is still broken). 2013-11-02 22:19:21 -04:00
comex 82729fcc8f Merge remote-tracking branch 'shuffle2/vc12'
Conflicts:
	Source/Core/Common/Common.vcxproj
	Source/Core/Common/Common.vcxproj.filters
2013-10-31 16:51:56 -04:00
degasus 498d491942 Merge branch 'viewportCorrection' 2013-10-29 22:33:51 +01:00
degasus 35824aa4d5 ogl: ceil viewport, rounding isn't supported on vs and this is more like the old behavior 2013-10-29 21:42:40 +01:00
degasus f4a9deefa8 ogl: remove some unneeded includes 2013-10-29 18:55:50 +01:00
degasus 8e0f91f70e d3d: use backend based UpdateViewport instead of VideoCommon one 2013-10-29 18:55:50 +01:00
degasus acc0b3b21c ogl: don't call SetViewportChanged from backend as it's not needed any more 2013-10-29 18:55:50 +01:00
degasus 3151d8709c VideoCommon: move ViewportCorrection into VideoCommon
D3D doesn't allow bigger viewports than rendertargets. But flipper does, so the viewport will be clipped and the transformation matrix will be changed.
This was done in the D3D backend itself. This is now moved into VideoCommon. This don't reduce code, but in this way, VideoCommon doesn't depend on the backends.
2013-10-29 18:55:50 +01:00
Ryan Houdek f18c461fd6 [viewport-float] Fix OpenGL ES 3 build. 2013-10-29 17:10:02 +00:00
degasus edf0511d4e OGL: Use floating points for viewport parameters.
As told by neobain, ARB_viewport_array introduced float viewports.
They must be supported on OGL4.1+, but it's usually also implemented on 3.3 GPUs.
2013-10-29 15:29:06 +01:00
Shawn Hoffman ccd30024b3 Update to VS2013 and a slew of build-related updates. Notes:
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
2013-10-26 17:55:38 -07:00
Tony Wasserka f82e1b9dc7 D3D: Use floating points for viewport parameters.
OpenGL 4.1 allows for a similar change thanks to ARB_viewport_array, but we don't make use of this, yet.
2013-10-26 12:40:37 +02:00
Lioncash 97cd42f5c3 Remove some unnecessary includes as well as simplifying exisiting ones if possible. 2013-10-19 19:58:56 -04:00
comex de1773affb Basic precompiled header support for Linux/OS X. Shaves 20-30% off full rebuild time on my system. 2013-10-17 00:07:35 -04:00
comex cffe6ba3fd Fix TextureEncoder.h 2013-10-16 23:20:51 -04:00
degasus f850d283d1 ogl: only use bufferdata if buffersubdata is broken
Else nvidia fallback would be slower than needed
2013-10-16 15:46:58 +02:00
Ryan Houdek f0bf5aa113 Fix rendering on Adreno and Mali. This adds a new DriverDetails bug to know if the bufferstreaming is broken. Thanks degasus for fixing this. 2013-10-16 11:27:58 +00:00
degasus 5de7ac4791 OGL: update ubo workaround 2013-10-12 20:31:59 +02:00
degasus 6e2fe72b8f D3D: also uses VideoCommon constant buffer handling
As now both backends uses the VideoCommon one, the old setting API was removed.
2013-10-12 20:29:56 +02:00
degasus 7c14463d11 ogl: implement useful constant buffer upload
this will remove the additional memcpy introduced in my last commit
2013-10-12 20:29:56 +02:00
degasus 4377618438 VideoCommon: keep a copy of the const buffer in VideoCommon
The upload in the backend isn't done, it's just pushed by the mostly removed SetMulti*SConstant4fv.
Also no optimizations was done on VideoCommon side, but I can start now :-)

Sorry for the hacky way, but I think this is a nice (working) snapshot for a much bigger change.
2013-10-12 20:29:56 +02:00
degasus 0753ce5bda ogl: use GL_RGBA instead of GL_RGBA8
8 bit per pixel is _everywhere_ the default, so we don't need to define it explicitly.
Also we don't rely on exact 8 bit resolution.
2013-10-12 16:34:06 +02:00
Ryan Houdek 0556193442 Build fix for previous commit. 2013-10-11 21:45:44 -05:00
Ryan Houdek cf7521dc36 [Android] Make Tegra 4 output graphics that aren't visually appealing. 2013-10-11 21:42:07 -05:00
Matthew Parlane 414ed6ef63 C.K. should fix his website before throwing stones at obsolete xml. 2013-10-09 23:56:16 +13:00
Matthew Parlane fbcc41c18e Fix references for OGL, SW and D3D. 2013-10-09 23:49:00 +13:00
Matthew Parlane 4a0745799f Missed OGL includes apparently. 2013-10-08 18:03:33 +13:00
Matthew Parlane eb480a406c Fix Windows vcxproj files. 2013-10-08 17:52:18 +13:00
Jasper St. Pierre 9920362581 Fix MSVC project files
yay relative paths
2013-10-07 18:50:21 -04:00
Jasper St. Pierre a7c7208103 Put Plugins/ in Core/, rename to VideoBackends 2013-10-07 10:37:01 -04:00