This helpers are not for general CR calculation, they are just for the
common case of the sign extended result of integer instructions if the
rc bit is set.
They must not be used by other instructions like cmp, so there is no
need to be as flexible.
cmpi shall compare two signed 32 bit values. The used difference a-b
may overflow and so the resulting 32 bit value can't represent it.
A correct way would be cr = s64(a) - s64(b) and it should be done in
this way in the JITs, but the Interpreter shall implement the most
readable way.
Also drops the now unused helper function.
The switch statements in these functions appear to get transformed into
an if..else chain on NVIDIA's OpenGL/Vulkan drivers, resulting in lower
performance than the D3D counterparts. Transforming the switch into a
binary tree of ifs can increase performance by up to 20%.
Since we don't want users to have to configure the region manually
and always enforce one automatically, we should fall back to a region
that was likely to be chosen by the user instead of always using
PAL whenever the title region cannot be detected.
Dolphin doesn't mess with installed NAND titles like the system menu,
so it is a reliable indicator of what region the user wants.
"Pad size" just doesn't make much sense. Let's go with "Buffer size"
instead, since the control for it is labeled "Buffer".
(Another possibility is "Pad buffer size", but I'm against that,
because we've stopped referring to controllers as "pads" in almost
all GUI strings.)
* Add missing Language setting loading/saving. This was added after the
original OnionConfig PR, which is why support for it was missing.
* Change MovieConfigLoader to reuse ConfigInfos. Less duplication.
* Extract MovieConfigLoader::Save into SaveToDTM. The DTM should use
the current config and not just the movie layer. This makes more
sense than just saving the movie layer, which may not always exist,
and also fixes a crash that would happen when creating a new
recording because the movie layer wouldn't exist in that case.
(Plus, having to get the loader from the layer and call ChangeDTM
on it manually is not very pretty.)
Not really used anywhere yet, but useful for not having to duplicate
config locations and for getting rid of conflicts when I get around
to rebase my Main.Core and Main.DSP porting PR.
Settings that come from the SYSCONF are now included in Dolphin's
config system as part of the base layer. They are handled in a
special way compared to other settings to make sure they are only
loaded from and saved to the SYSCONF (to avoid different, possibly
contradicting sources of truth).
This could cause the first branch of the bootucode procedure, which
takes its parameters from the AX registers, to run during the ROM init
sequence. Since the ROM doesn't set any of the AX registers, the values
aren't meaningful, and can cause bad DMA transfers and crashes.
This adds a WiiWad constructor that takes a BlobReader, so that the
class can be used with more than just files from the host filesystem.
Required for using WiiWad with WADs from update partitions.
Must be 9 characters at most; otherwise the serial number will be
rejected by SDK libraries, as there is a check to ensure the string
length is strictly lower than 10.
The casts to u32* are technically undefined behavior. The u8* cast is
left, as char/unsigned char is exempted from this rule to allow for
bvtewise inspection of objects (and this is what s8/u8 are typedefs of
on platforms we support).
Writing to 0x60 does actually not "init exception[s]" or anything like
that. Not at all. Rather, it *breaks* a check in Nintendo's SDK, which
makes it fail to realise that the hook hasn't been set up.
This prevents the SDK initialisation routines from writing the rest of
the hook instructions (total: 0x20 bytes), which in turn causes an
anti-piracy check to fail in some Ubisoft games (including Tintin).
Dolphin can be really amazing sometimes.
No clue where people got the 0 value from, or why it's labelled as
"time". As far as I can tell, it is always set to 0xffffffff by
official NAND titles, including the system menu.
It's not specific to WADs. The BS2 emulation boot code will also need
to update the state file.
Move the struct to Boot and add a helper function that will handle
reading + computing the checksum + writing the state file.
Sentret_C posted this comment on Transifex recently:
"What Dolphin refers to as "Table View" and "List View" are
similar to "List View" and "Grid View" in Steam, and I think
the Steam names describe them better."
I agree with that, so here's a commit that changes the names.
This is supposed to get efb2tex to the same texture as efb2ram, by applying the related efb copies as updates after each other, in the order of their creation.
Improve bookkeeping around formats. Hopefully make code less confusing.
- Rename TlutFormat -> TLUTFormat to follow conventions.
- Use enum classes to prevent using a Texture format where an EFB Copy format
is expected or vice-versa.
- Use common EFBCopyFormat names regardless of depth and YUV configurations.
This way it allows us to use surfaceless contexts in EGL/GLX. It also
ensures that the shared context shares a similar setup to the main
context's framebuffer, potentially reducing the number of variants a
driver needs to generate.
Previously we were falling back to an earlier version of the compiler.
The older version cannot compile our ubershaders without various
graphical issues.
When recording during netplay, the stop message was only sent after you
have chosen a filename for the replay, causing the other player(s)
to freeze for a few seconds. This takes care of the annoyance.
There were two problems with this:
1. If the starting offset was beyond the end of the disc,
we would dereference an invalid iterator.
2. The data beyond the end of the disc was non-deterministic.
Having DiscContents with size 0 would mean that some DiscContents
might not get added to the std::set because of them comparing
identically to another DiscContent.
This replaces an older piece of code in WriteDirectory that ensures
that no two files have the same starting offset. (We now care about
the ending offset, not the starting offset. The new solution both
ensures that no two files have the same ending offset and that no
two files have the same starting offset.)
For instance, we don't want to show TGC files that might be
inside the /files/ directory of a GameCube DirectoryBlob,
and we don't want to show the /sys/main.dol files for extra
partitions of Wii DirectoryBlobs.
Now it's clearer that SetDOL depends on SetApploader
and BuildFST depends on SetDOL.
As a side note, we now load the DOL even if there's
no apploader. (I don't think it matters whether we
do it, but it was easier to implement this way.)
This lets VolumeDirectory/DirectoryBlob skip implementing
various volume functions like GetGameID, GetBanner, etc.
It also lets us view extracted discs in the game list.
This ends up breaking the boot process for Wii
DirectoryBlobs due to workarounds being removed from the
boot process, but that will be fixed later by adding
proper DirectoryBlob support for things like TMDs.
We now expect the directories to be laid out in a certain
format (based on the format that WIT uses) instead of requiring
the user to set the DVD root and apploader path settings.
This is useful for blob types that store Wii data unencrypted
(such as WIA and discs extracted to directories) so that
we don't have to waste CPU time encrypting in the blob code
just to decrypt right afterwards in the volume code.
The old approach to detecting DOL/ELF files doesn't fit
with the new way of implementing extracted discs.
The game list is already doing it in a way that's similar
to the approach that this commit uses.
The Config::AddLoadLayer functions call Load on the layer
explicitly, but Load is already called in the constructor,
so they'd cause the loader's Load function to be called twice,
which is potentially expensive considering we have to read an INI
from the host filesystem.
This commit removes the Config::AddLoadLayer functions because
they don't appear to be necessary.
This was mainly included for debugging, but could end up being confusing
for users, as well as polluting the GL program cache with a mix of uber
and specialized shaders if the option was changed.
On Windows, File::GetTempFilenameForAtomicWrite returns a path
somewhere in C:\Users\XXX\AppData\Local\Temp\{UUID here}\
in which all writes just fail.
Just use the SYSCONF path + ".tmp" for the temporary file name.
These vertex formats enable all attributes. Inactive attributes are set
to offset=0, and the smallest type possible. This "optimization" stops
the NV compiler from generating variants of vertex shaders.
This add support for SD protocol 2 while staying compatible with protocol 1.01.
Most of this is quite hacky, but it seems to be working well.
The original implementation was quite confusing, so I didn't touch most of the stuff I did not understand.
This makes the EGL interface select OpenGL|ES contexts over "desktop"
OpenGL ones.
Possibly not useful for anyone outside my own debugging, but you never
know
It's not particularily useful to list the platform here,
and these kinds of messages that use words as parameters
are more likely to be mistranslated than the average string.
Same as the previous commit, except I'm copying strings
in the other direction because the DolphinWX variants
of these strings could use some improvement.
The spec says it should have an EXT not OES suffix, as it's enabled as
an interaction with GL_EXT_multi_draw_arrays.
On some drivers GetProcAddress() returns NULL, which causes the
GLExtensions init to fail
This 'happened' to work if GetProcAddress() doesn't return NULL on missing
functions (as allowed in EGL) - as the function appears to never be called so
this would not have been noticed.
Mesa also (incorrectly?) exports the EXT version, so this would all
happen to work there, but appears to be contrary to the spec.
This invalid prefix even ended up in the upstream khronos registry, the
issue was reported here:
https://github.com/KhronosGroup/OpenGL-Registry/issues/81
The section is 0x461 bytes long, not 0x460. The config data is also now
initialised to zero to avoid garbage being written to the SYSCONF.
Because our handling has been wrong forever, we discard older BT.DINF
section backups as using them would result in the section being the
wrong size / incomplete again.
It turns out that the last byte of array entries isn't unused (as we
thought); instead, it looks like it's actually part of the main data,
and the length stored next to the name is in fact the length minus one.
Getting it wrong and always storing a null byte in there won't affect
most entries (since the last byte is zeroed most of the time), except:
- IPL.NIK: the length is stored in the last byte, and it must be kept.
- BT.DINF: u8 unknown[0x45] should be another Bluetooth device entry.
- Possibly other unknown affected entries.
I don't know who thought it would be a good idea to put the Wiimote
connect code as part of the Host interface, and have that called
from both the UI code and the core. And then hack around it by having
"force connect" events whenever Host_ConnectWiimote is called
from the core...
BluetoothEmu had its own bdaddr_t type which is a old style C struct
and typedef, which makes comparisons and copies a bit ugly.
On the other hand, BTReal had its own btaddr_t type using std::array.
To make things very slightly nicer, this commit changes the Bluetooth
code to use a single type (std::array<u8, 6>) for all BT addresses.
Imports/exports don't always use the title key. Exporting a title and
importing it back uses the PRNG key (aka backup key handle or key #5),
not the title key (at all).
To make things even more fun, some versions of IOS have a bug that
causes it to use a zeroed key instead of the PRNG key. When Nintendo
decided to fix it, they added checks to keep using the zeroed key only
in affected titles to avoid making existing exports useless.
(Thanks to tueidj for drawing my attention to this.
I missed this edge case during the initial implementation.)
This commit implements these checks so we are using the correct key
in all of these cases.
We now also use IOSC for decryption/encryption since built-in key
handles are used. And we now reject any invalid common key index,
just like ES.
Core::PauseAndLock requires all calls to it to be balanced, like this:
const bool was_unpaused = Core::PauseAndLock(true);
// do stuff on the CPU thread
Core::PauseAndLock(false, was_unpaused);
Aside from being a bit cumbersome, it turns out all callers really
don't need to know about was_unpaused at all. They just need to do
something on the CPU thread safely, including locking/unlocking.
So this commit replaces Core::PauseAndLock with a function that
makes both the purpose and the scope of what is being run on the
CPU thread visually clear. This makes it harder to accidentally run
something on the wrong thread, or forget the second call to
PauseAndLock to unpause, or forget that it needs to be passed
was_unpaused at the end.
We also don't need comments to indicate code X is being run on the
CPU thread anymore, as the function name makes it obvious.
The region mismatch check that we used can give false positives.
Skipping the check won't lead to any harm - games will ignore
save files that have a non-matching fourth game ID character.
According to http://scanlines16.com/en/blog-3/retro-gaming/game-cube/gamecube-korean-master-list/,
Korean GC releases use the following country codes:
- E or W for games in English
- K for games in Korean
- Unknown value for games in Japanese (my guess is that they might
have made the discs bit-for-bit identical to Japanese releases
because the regions of these games are already set to NTSC-J)
As far as I know, the GC has no Taiwanese releases, which is what
the W country code is used for on the Wii. But I could be wrong.
A small note: The country_byte == 'K' check in the code isn't
actually necessary as long as RegionSwitchGC returns NTSC_J
for 'K', but I thought it would be better to not rely on that.
The county code isn't 100% reliable for detecting the region.
For instance, some games released in Korea have the country
code E even though they're region-locked to NTSC-J consoles.
This commit makes the GC disc region detection match the Wii
disc region detection (apart from the region value being in
a different place on the disc).
Showing the Wii remote connection status leads to inconsistent UX,
because we don't do anything like that for GameCube controllers
or with Bluetooth passthrough.
It's also questionable how useful it is given that:
* it doesn't print the number of connected remotes, just that one
remote is connected, connecting or not connected, so the only info
it provides is actually wrong when using multiple remotes;
* this user-facing feature is actually broken in master and no one has
complained AFAIK, which means people don't really rely on it;
* the status bar isn't visible most of the time unless the user is
using render to main or deliberately keeping the main window's
status bar visible by moving the render window and they're not too
far away from their screen;
* emulated Wii remotes now reconnect on input, which means that there
is less of a need to actually know at all times whether a remote
is connected, since pressing any button will reconnect it and provide
immediate, visible feedback via OSD messages and the Wii remote
pointer appearing.
Rather than returning 0 / not creating an expected SI interrupt. You can
test this by running VBA-M in a debugger and stopping it while it's
connected to Dolphin: on current master, Dolphin will freeze-up until it
gets a response. With this PR, Dolphin will gracefully disconnect the device, and reconnect if it starts responding again.
Tracking a buffer's size manually and storing it under a name that
does not make it obvious it is related to the buffer is really... meh.
Also gets rid of the need to manually manage its capacity and
new/delete an array.
This commit merges the import and export contexts into a single context
because this is what IOS does, which means we can only reproduce its
behaviour correctly if we use a single context for both operations.
The other reason is that having two separate and very similar structs
is not really a good idea.
While working on this commit, I was notified that our handling of
ImportTmd/ExportTitleInit is not correct. In particular, we always use
the title key for both importing and exporting, which is wrong. To make
this easier to fix in a follow-up PR, the context now also has a title
key field, just like ES. This also lets us avoid computing it every
single time in ImportContentDone.
Allows them to be reused easily. Still a bit too much duplicated code
in my opinion (OpenContent/SeekContent/ReadContent should just call
FS code), but this is a start.
I think I do not need to explain why hardcoding space usage for two
random directories when we can calculate it and when IOS doesn't
actually do that is wrong.
There are some cases where overriding the opening.bnr names
isn't desirable, such as when someone has several modded
versions of a game that differ in names but not game IDs.
This was causing Dolphin to always save "WriteToWindow = False". Instead
of disabling logging to the window (a config value), tell LogManager
that there's no window to log to (a runtime state).
This is a remake of https://github.com/dolphin-emu/dolphin/pull/3749
Full credit goes to phire.
Old message:
"If none of the texture registers have changed and TMEM hasn't been invalidated or changed in other ways, we can blindly reuse the old texture cache entries without rehashing.
Not only does this fix the bloom effect in Spyro: A Hero's Tail (The game abused texture cache) but it will also provide speedups for other games which use the same texture over multiple draw calls, especially when safe texture cache is in use."
Changed the pr per phire's instructions to only return the current texture(s) if none of the texture registers were changed. If any texture register was changed, fall back to the default hashing and rebuilding textures from memory.
The actual problem was combining the values from the date and time
pickers incorrectly. The uninteresting parts of the returned wxDateTime
need to be ignored and the WX documentation says so for the time picker.
I also cleaned up the handling of both widgets a bit, removing redundant
member variables in the process, in order to not risk correctness.
It's a bit confusing to get a yes/no dialogue box without any indication
of what yes or no will do in this situation, so add a short explanatory
sentence.
Only remaining issue is that clicking on the titlebar of the window, to give it focus, is already interpreted as input. But clicking on the window in the task bar, or using alt tab works to get back, without causing an input event.
Changes:
- `ShowDevelopmentWarning` is now under the '[Interface]' group in
Dolphin.ini, with other interface-related settings. So, whoever uses
DolphinQt will have to edit that manually again. Sorry!
- Game search paths and the last file are now shared properly with
DolphinWX
- Qt-only preferences like "Preferred View: list/table" are now
stored using the platform's native settings storage, rather than in
UI.ini
struct GekkoOPTemplate was implemented differently in different
compilation units, which breaks the ODR and could end up causing issues
as symbols exported from one compilation unit could end up being used by
another even if they have different implementations.
This puts them in an anonymous namespace, restricting any generated
symbols to the single compilation unit.
Some code was calling more than one of these functions in a row
(in particular, FileUtil.cpp itself did it a lot...), which is
a waste since it's possible to call stat a single time and then
read all three values from the stat struct. This commit adds a
File::FileInfo class that calls stat once on construction and
then lets Exists/IsDirectory/GetSize be executed very quickly.
The performance improvement mostly matters for functions that
can be handling a lot of files, such as File::ScanDirectoryTree.
I've also done some cleanup in code that uses these functions.
For instance, some code had checks like !Exists() || !IsDirectory(),
which is functionally equivalent to !IsDirectory(), and some
code was using File::GetSize even though there was an IOFile
object that the code could call GetSize on.
The MonoSpaceFont of the LogWindow was using a Windows native way to
specify a font name.
Now it's using wxFONTFAMILY_TELETYPE.
On Win32 it will additionally request the specific font name "Consolas",
so it doesn't use ugly "Courier New". I pilfered that specialization
from Source/Core/DolphinWX/Cheats/ARCodeAddEdit.cpp.
Before, if you extracted a directory like /map/Final/Release/,
Dolphin would create the nested folders map, Final and Release
in the output directory and put the files in Release instead of
just putting the files directly in the output directory.
Sepalani