1c21ea955c
gsdx ogl: HLE channel effect for terminator 3
...
Unfortunately I think the game uses another similar effects
2016-05-20 19:45:20 +02:00
247d33a627
gsdx ogl: always clear depth buffer in FFX2
...
It avoid depth issues and I'm sure it won't broke other games this way.
Issue #1340
2016-05-19 17:53:46 +02:00
2166980f91
GSDX: Calculate dimensions of rectangle after merge
...
* Properly display rectangle size after passing through merge circuit on
GS Dumps and GS Frame titlebar.
2016-05-19 15:53:49 +05:30
58b43dbb6c
GSDX: Rework video mode detection code
...
* Use some nice enums instead of macros
* properly detect 720P/1080I separately.
* Some code cleanup, extended variable names and added few comments
2016-05-19 14:02:50 +05:30
e258f3e2fa
gsdx ogl: update accurate DATE behavior
...
* Fast accurate DATE is always enabled, it was faster than standard DATE
* The less fast version is always enabled too. It is likely barely used
so perf impact will be small on few game that could hit this path.
Nice rendering has a higher priority
* The "slow" path will depends on the date option.
Note normally it isn't too slow (-10%) if GL_ARB_shader_image_load_store
is supported but AMD crimson is an epic fail.
2016-05-19 10:03:46 +02:00
7b27be1306
gsdx: Consider horizontal offsets when merging output
...
Fixes games like Time Crisis 2/3, which use two half-width display
rectangles placed side by side in split screen mode by using different
DISPLAY.DX values.
2016-05-19 10:06:12 +05:30
899784cbdc
onepad: Only append -dev to library name for Devel builds
2016-05-18 22:58:15 +01:00
3a274e85f0
cmake:onepad: Add wxWidgets to dependencies
2016-05-18 22:56:59 +01:00
14fa797235
gsdx hw: always uses a big RT on snowblind engine game
...
Avoid headack to avoid conflict between 1280x1024 and 640x1280 resolution
2016-05-17 20:01:00 +02:00
a4c7541092
gsdx ogl: tentative hack to make FFX go along with depth option
...
Issue1: Depth buffer is wrongly invalidated only the first page is detected.
Issue2: First page seems to be partially written. Could be a GSdx transfer bug.
Anyway, invalidation only support a page granularity.
So here a quick workaround that will clear depth buffer in case of very small partial write.
Might worth to check regression on nocturne/digital saga
2016-05-17 19:33:12 +02:00
37c049425d
gsdx ogl: gl depth is written by default
...
Fix bad depth state in dump (yes the bug is 2 years old!)
2016-05-16 20:10:32 +02:00
f5b174f985
gsdx ogl: pitch is always the width of the transfer not the size of the texture
2016-05-16 19:20:01 +02:00
fa921215d9
gsdx ogl: add GL_ARB_get_texture_sub_image extension support
...
could help to read back a portion of a texture
2016-05-16 18:58:33 +02:00
e02753df46
gsdx ogl: oups, mandatory function pointer was wrongly optional
2016-05-16 18:58:33 +02:00
37e4d2bd48
gsdx ogl: update old comment
2016-05-16 18:58:33 +02:00
96b5170d8c
Merge pull request #1317 from PCSX2/gsdx-array-coverage
...
Gsdx array coverage
2016-05-16 18:16:15 +02:00
ed0adf61d3
gsdx ogl: allow to define a debug context in windows.
...
Be aware: dev build will be slow and quite chatty
2016-05-16 17:08:20 +02:00
30ce6b0a6a
gsdx ogl: check debug function exists
...
I'm sure they exists in the openGL renderer context but there are
also used in common code. So potentially in DX context.
2016-05-16 16:59:00 +02:00
99476f4b13
gsdx ogl: explain better previous clear vs framebuffer comment
2016-05-16 16:49:18 +02:00
08f7bd2dc3
gsdx: add crc hack for Ar tonelico 2
...
It would requires some texture dynamic width convert shaders.
So as a quick solution, let's add a new CRC hack.
For issue #1362 (granted the CRC is correct)
2016-05-16 10:55:02 +02:00
1522cba5b0
gsdx ogl: performance note of texture clear vs framebuffer clear
...
In case of render target. FB clear is better
2016-05-16 10:38:47 +02:00
e776118de9
gsdx-ogl: implement previous DATE optimization in a single shader pass
...
Faster :) Reduce further the cost of accurate date
The optimization will clear the stencil to 1. So all pixels will have a
single sample that pass both the depth & stencil test. No primitive
overlaps So the destination alpha test can be done directly in the
shader.
2016-05-15 17:44:40 +02:00
3ab12cef2f
gsdx ogl: accelerate special case of accurate date.
...
Game often uses date to allow a single pixel pass. If this
use case is detected, stencil buffer will be cleared after first pixels
that pass both depth&stencil test.
It seems to reduce the load on the GPU.
Note: with the help of texture barriere, maybe we could implement the algo
with a single pass.
2016-05-15 17:22:58 +02:00
025be70c42
gsdx-ogl: allow to fallback to a slow accurate DATE when GL_ARB_shader_image_load_store isn't supported
...
The best is still to have a DX11 generation GPU
2016-05-15 16:29:29 +02:00
5b061e062c
gsdx ogl: replace ClearRenderTarget_i by glClearTexSubImage
...
Avoid state change, avoid potential texture buffer reallocation
Note: require GL_ARB_clear_texture
2016-05-15 15:55:31 +02:00
82060320ef
gsdx ogl: use draw list size for sprite instead of vertex number to select date algo
...
Latest overlap detection allow to draw multiple sprite instead of 1,
so the limit based on vertex number is too conservative.
2016-05-15 15:00:52 +02:00
c054b097e9
gsdx ogl: fix wrong depth clear
...
If a color buffer is still attached and is smaller than depth buffer,
the latter won't be fully cleared.
As a faster alternative, use GL4.4 clear texture function. Avoid to fiddle with
framebuffer and pixel tests.
Fix #1362x Ar Tolenico 2 map clip
2016-05-15 14:57:37 +02:00
caacb1dc9f
gsdx-ogl: add texure clear function (GL4.4)
2016-05-15 14:57:11 +02:00
d47d9e5017
gsdx-ogl: fix a minor gcc warning
2016-05-15 13:10:46 +02:00
913e3d65d2
gsdx ogl: use glViewportIndexedf and glScissorIndexed
2016-05-14 17:18:16 +02:00
cd9ee3c468
gsdx ogl: emulate GL_ARB_draw_buffers_blend and GL_ARB_viewport_array
...
New functions only set the parameter to a single buffer whereas old function
set all buffers
2016-05-14 17:15:30 +02:00
4065730e36
gsdx ogl: merge sprite hack take 2
...
try to detect paving correctly. Avoid to break effect such as Heat effect in Tekken5
2016-05-14 12:24:56 +02:00
2fc244a3eb
gsdx-ogl: inline function only call once
2016-05-14 11:53:02 +02:00
24a673c482
gsdx ogl: avoid special format on the merge sprite hack
2016-05-13 18:28:21 +02:00
156b6425d2
gsdx ogl: add UserHacks_merge_pp_sprite option to reduce upscaling glitches
...
For test purpose, it is higly experimental.
So far it is yield interesting result for tekken5
2016-05-10 08:12:07 +02:00
c019f86529
gsdx ogl: add a performance note for a potential channel optimization
2016-05-10 08:11:28 +02:00
4effc70792
gsdx hw: Fix regression on align sprite
...
The hack also updates position of not texture mapped sprite.
Unlike the 2nd hack (round sprite) which can be skipped if TME is disabled
2016-05-09 09:45:34 +02:00
5b04672ba2
gsdx ogl: separate Tales of Abyss/Urban Chaos effect based on the fbmask
...
Avoid to rely on CRC
2016-05-08 17:31:13 +02:00
48d962e15a
gsdx log: print detected crc
...
Helpful to get crc from gs dump
2016-05-08 16:30:50 +02:00
fb6a6f73c4
gsdx: move Tekken5/Tales of Abyss CRC to Dx level
2016-05-07 22:46:42 +02:00
ecbcc566fe
gsdx ogl: use GT shader for Tourist Trophy
2016-05-07 22:46:41 +02:00
fc86620327
gsdx ogl: disable channel effect when signature is a bit different
...
Hack to avoid regression on Blood Will Tell
2016-05-07 22:46:41 +02:00
30b452543a
gsdx ogl: tekken5 uses similar effect as Gran Turismo
...
So just reuse GT hle shader :) Acid stage is now correct. However it might need
some tuning for others stages.
Still look awful with uspcaled resolution (note internal game framebuffer is around 160x128)
2016-05-07 22:46:41 +02:00
d41613c46a
gsdx ogl: add a Tales of Abyss HLE shader
...
Again fast and efficient but it relies on CRC
v2: forget to update the precompiled shader...
2016-05-07 22:46:41 +02:00
d5681ba01c
glsl: fix a bug in urban chaos hle shader
...
Bug only impact the lsb bits of the depth conversion, so impact is likely small
2016-05-07 22:46:41 +02:00
70ee8c5bc4
gsdx ogl: add an HLE brightness/contrast shader for GT series.
...
It works and it is very fast. But it relies on CRC
Others effect need to be tested as well
2016-05-07 22:46:41 +02:00
91c164ecca
gsdx tc: avoid potential division by 0
2016-05-07 18:36:28 +02:00
265ea82780
gsdx tc: avoid to load data outside of the GS memory
...
Avoid crash in Kungfu panda
2016-05-06 21:46:29 +02:00
f34e77f08c
gsdx: fix regression on 24 bit format (gust game)
...
bpp is the size of the container format but not the size of the format itself.
For PSM24, bpp is 32, trbpp is 24
2016-05-06 13:49:24 +02:00
e890ce989c
gsdx: throw oom exception + error
...
Texture can't be NULL anymore, so we can remove a couples of check
2016-05-05 18:53:51 +02:00
d58b71688b
gsdx debug: auto GL_POP
...
Nicer and exception safe
V2: miss definition of vs/ps
2016-05-05 18:53:32 +02:00
37c7fa7663
gsdx: add draw exception (OOM and Recoverable)
...
The exception will free the unused (but allocated) texture aka the emergency break ;)
Recoverable could be useful for unsupported draw call
2016-05-05 17:47:32 +02:00
c8dddfed06
gsdx hack: move m_skip and m_userhacks_skipdraw to GSState level
...
Avoid to push argument to call IsBadFrame
2016-05-05 16:22:14 +02:00
21d1bd48ec
gsdx hack: move the CRC setup into a separate function
...
In order to reduce a bit the overhead of IsBadFrame called each draw calls
2016-05-05 16:03:48 +02:00
7b0427e86e
gsdx hack: use psm lookup + remove now useless log
2016-05-05 15:46:54 +02:00
8424eeb4ee
gsdx tc: small hint for the compiler
2016-05-05 15:32:21 +02:00
055b9c57e7
gsdx tc: use unscaled size as clamping in Target::Update
...
Might avoid/reduce crash like #1340
2016-05-05 12:59:49 +02:00
5948c2d8cd
gsdx AMD: broken for broken
...
Until AMD release the driver with a fix, I can't use 2nd blending source with SSO.
So let's use the first source. Blending/Alpha will be wrong. But it is likely better
than an uninitialized alpha value.
2016-05-05 12:24:55 +02:00
f712c5c6d0
gsdx tc: use GSLocalMemory::m_psm instead of hardcoded value
2016-05-05 12:19:25 +02:00
642cc50ac4
gsdx hw: reduce verbosity of channel skip log
2016-05-05 12:19:19 +02:00
7c430c9d3c
glsl: fix coordinate in channel depth effect
...
UV can't be used directly in channel effect
Properly fix Urban Chaos smoke
2016-05-04 18:08:40 +02:00
b8b0a0d662
gsdx hw: remove dead code
2016-05-04 18:08:34 +02:00
90af611fdb
gsdx ogl: Fix channel effect interaction with accurate blending
...
* Vertex info must be updated before PrimitiveOverlap
* Fix the vertex number (2 not 4)
* add an uint16 cast to shut up Visual Studio
2016-05-02 19:48:11 +02:00
e190841d67
gsdx ogl: improve blending logging
2016-05-02 18:14:02 +02:00
3077cc82cc
gsdx hack: Ghost in the Shell still broken in openGL
2016-05-02 18:14:02 +02:00
6430e41fb5
gsdx:windows: Update GUI to reflect recent changes
...
"Enable Hardware Depth" removed from main dialog.
"Disable Depth Emulation" and "Fast Texture Invalidation" added to Hacks
dialog.
And fix lots of whitespace issues.
2016-05-02 00:28:10 +01:00
21e6a344a2
GSDX: Improvements to the GSDX dialog ( #1284 )
...
GSDX: Improvements to the config interface.
- GSDX: Add new logos to dialog
- GSDX: Remove all the extra null renderers
- GSDX: Changes to renderer combobox
- Sort all the renderers in ascending order. (the fact that D3D11 was
above D3D9 really annoyed me >_<)
- Properly display usage of D3D10/D3D11 on the combobox.
- Use highest available version of DX by default.
- GSDX: gray out upscaling hacks at native resolution
- GSDX-PSX: Modifications to the dialog
- Add new logos
- Remove SDL renderer from combobox since it was removed long ago.
2016-05-01 17:33:53 +01:00
826b38c47a
gsdx tc: use array in GSOffset to store texture coverage
...
GSOffset is already based on a lookup of PSM/BP/BW. Coverage only adds
the size parameters (so only 256 possibilities)
It replaces the hash lookup with a free array access.
2016-05-01 15:02:36 +02:00
7add3d1018
gsdx hack: add a lengthy comment to explain man hunt2 hack
...
An HLE shader replacement could be done for this game but it is
low priority
2016-05-01 13:37:54 +02:00
4bf484c881
gsdx: move various games crc to dx level
...
* GT3
* GT4
* GTConcept
* JamesBondEverythingOrNothing
* SkyGunner
* StarWarsBattlefront2
* StarWarsBattlefront
* TouristTrophy
* ICO
* DeathByDegreesTekkenNinaWilliams
2016-05-01 13:22:12 +02:00
5676acaef9
glsl: support channel effect on depth texture too
2016-04-30 16:07:45 +02:00
e0581ee771
gsdx ogl: Finalize the urban chaos workaround
...
Rendering must be nice now
2016-04-30 14:52:53 +02:00
14e1ed06df
glsl: add an HLE shader for Urban Chaos
...
Pro:
* Replace 140 draw calls into a single one
* No complex texture conversion/lookup
* smaller solution than a generic solution
2016-04-30 14:52:53 +02:00
7d191ebf8e
gsdx tc: load palette for pseudo 8 bits depth
...
Rendering is still broken but I'm afraid it will need a dedicated shader
2016-04-30 14:52:43 +02:00
12b8704502
gsdx dx: disable channel shuffle
2016-04-30 14:52:43 +02:00
b4c7d32741
gsdx ogl: avoid to wrongly detect a channel shuffle
2016-04-30 14:52:43 +02:00
1011a757a8
gsdx hw: factorize redundant code
2016-04-30 14:52:43 +02:00
b78c772a14
gsdx: improve detection of channel shuffle
...
Improve rendering on Prince Of Persia (requires preload data hack)
Worth to re-test: MTGS2/3
Urban Chaos is a bit better but there still a bad overlay
2016-04-30 14:52:43 +02:00
02dff2653a
gsdx hack: sort the file
...
* separate Dx only/aggresive hack
* add GSC_CrashNburn and GSC_BullyCC to Dx only section
2016-04-30 12:45:06 +02:00
60267790a1
gsdx: move (most) of the hw hack into a separate file
...
GSState.cpp was really too big
2016-04-30 12:24:08 +02:00
7a5e1d4154
gsdx ogl: allow to use a separate texture for the channel effect
2016-04-29 17:34:17 +02:00
a9d25efcde
gsdx ogl: extend state to support up to 8 textures
2016-04-29 17:34:17 +02:00
e45f90fac3
gsdx: fix a gcc warning
2016-04-29 17:34:17 +02:00
e195e67a48
gsdx: move Metal Gear Solid CRC to DX level
...
OpenGL is near perfect :)
2016-04-29 17:34:17 +02:00
5e5069423b
Merge pull request #1321 from PCSX2/gsdx-preloadcrash
...
GSDX: Avoid crash when TBW == 0 - Preload data frame
2016-04-28 23:06:29 +02:00
cb19451418
gsdx ogl: implement RT channel fetch
...
Fix blending of Metal Gear Solid/KillZone (and potentially other games)
Potentially impact issue #905 , #594 , #914 , #896
2016-04-28 22:56:38 +02:00
c445a14c46
gsdx ogl: extend shader to lookup a single channel
2016-04-28 22:56:38 +02:00
eaa4fd41e2
gsdx ogl: improve logging of special effect
2016-04-28 22:56:38 +02:00
0aa8fe0f20
GSDX: Avoid crash when TBW == 0
2016-04-28 21:36:21 +01:00
f946f38f26
gsdx hw: keep the debug counter in sync
...
Otherwise I'm screwed :p
2016-04-28 20:03:53 +02:00
04a578495f
gsdx hw: disable channel shuffle effect
...
Greatly reduce memory requirement for target
MGS3 at 4x: from 2680MB to 160MB
Remove a couple of (slow) draw calls
2016-04-28 19:46:26 +02:00
f63e38a59e
gsdx ogl: as always some games do bad stuff
...
Let's keep a comment for the moment. I don't know if we need to fix it, neither how.
2016-04-28 19:42:00 +02:00
45bfe2ad58
gsdx hw: trace some special post processing effect
...
* Double downscale is done in GTA
* Channel Shuffle is the top-left corner issue
So far nothing is emulated
2016-04-28 19:39:57 +02:00
5b04f4dab9
gsdx: add optimization note for the future
2016-04-28 18:01:21 +02:00
4808d89449
gsdx ogl: use enum pretty name
2016-04-28 18:01:20 +02:00
0de8f4a3a6
onepad: Use Bind instead of Connect
...
It's the recommended dynamic event binding method since wx2.9.
2016-04-27 08:59:11 +01:00
0d43de516c
onepad: Remove wx2.8 compatibility code
2016-04-27 08:59:11 +01:00
ab31915ce9
gsdx: glsl: fix silly typo
...
And regression on various games
2016-04-27 09:52:35 +02:00
aeb92592e7
gsdx ogl: use GSUtil::GetClassVertexCount
2016-04-26 19:29:04 +02:00
df70b8bb0e
gsdx: fix Q NaN value
...
Avoid potential undefined results
2016-04-26 19:09:32 +02:00
726b901dc5
Merge pull request #1304 from PCSX2/gsdx-faster-texture-cache
...
gsdx tc: reduce texture cache overhead
2016-04-26 16:46:44 +02:00
49d175b677
gsdx tc: allow to create a dummy Source without tons of memory allocation
...
It makes shared texture virtually free from the CPU PoV.
2016-04-24 22:30:56 +02:00
ad08701cb1
gsdx tc: trick the texture cache to use a depth format for depth texture
...
This way we avoid the rescaling of the depth buffer and texture allocation.
2016-04-24 22:18:26 +02:00
1960d51e60
gsdx tc: properly support 16 bits depth conversion
2016-04-24 22:18:26 +02:00
de38963904
gsdx ogl: plug the new depth sampling in the renderer
...
Note:
When source format is depth, integral texture coordinate must be used => depth_fmt 1/2/3
2016-04-24 22:18:26 +02:00
fda511a949
gsdx glsl: extend hw shader to sample depth texture
...
Will use integral coordinate to avoid any rescaling.
Bilinear interpolation isn't supported. I don't think it is allowed to
filter a depth texture anyway.
2016-04-24 22:18:26 +02:00
583de1bf0b
gsdx tc: add a dedicated function to lookup a depth source
...
The hypothesis is that game will use a depth (aka Z32/Z24/Z16/Z16S)
format when sampling depth texture as color. Technically one could use
a standard color format but block/pixel order won't be the same.
(otherwise I'm screwed)
=> Hypothesis invalid on GoW. They just do a scrambled rendering...
Lookup info:
* The first searched list is the depth pool as we search a depth
texture.
* 2nd one is the render target pool (if a depth was converted to a
render target already)
To avoid any CPU overhead, the source will be a pointer to the real texture
* Conversion (if float texture) will be done on the fly by the shader (GPU).
* Relative rescaling won't be supported. Texture must be fetched with
integral coordinate
2016-04-24 22:18:26 +02:00
9ee090a36e
gsdx tc: add a shareable texture flag
...
Plan is to bypass shader conversion/rescaling/copy for depth texture
2016-04-24 22:18:26 +02:00
8ec1461842
gsdx: increase the number of texture in the pool
...
It could slightly increase the VRAM requirement but it will reduce texture
allocation/unallocation at start/end of frame.
2016-04-24 22:14:51 +02:00
b4b878ac24
gsdx-ogl: add a note for a future small optimization
2016-04-24 22:14:51 +02:00
da1b032793
spu2x-linux: update GUI to support a 15 ms latency
2016-04-24 11:13:28 +02:00
4281b8630b
gsdx ogl: remove the useless shadeboost Constant Buffer
2016-04-24 11:08:14 +02:00
d610a6aac4
gsdx glsl: ofc forget to do the shader in bin
2016-04-24 11:07:46 +02:00
d027ed2092
gsdx ogl: merge GSTextureFXOGL to GSDeviceOGL
...
First file is rather small in openGL. And it is linked to the latter.
2016-04-24 10:55:22 +02:00
1558220f74
gsdx glsl: create a common header definition
...
* avoid duplication between all the files for UBO
* remove various interface define
2016-04-24 10:54:39 +02:00
8ee0783bd3
GSdx: remove useless variable
2016-04-24 10:42:03 +02:00
fa1377a8ee
gsdx tc: reduce texture cache overhead
...
Cache page coverage of texture into a hash map
Test done on Champion of Norrath (paltex + DisablePartialInvalidation)
Profiler:
Self of GSTextureCache::SourceMap::Add 5.39% => 0.23%
Self of GSTextureCache::LookupSource 15.27% => 10.82%
Hard to measure on CoN as it depends on memory transfer. Seem to be 5-10 fps faster.
2016-04-23 19:22:58 +02:00
67e955919f
gsdx: keep dump code enabled in dev release too
2016-04-23 18:29:56 +02:00
a149d6b26f
gsdx: use psm.bpp flag to improve code reading
2016-04-23 18:29:39 +02:00
dd98a0b913
gsdx: add a depth format flag
2016-04-23 18:28:50 +02:00
87867beb0e
gsdx-ogl: remove the invalidation of texture
...
It doesn't help the perf and only create overhead (test done on snow engine game)
2016-04-21 21:07:17 +02:00
3709b5aecc
gsdx: add a small comment to ease code reading
2016-04-21 09:28:44 +02:00
b5ec683318
gsdx-linux: remove custom resolution from the GUI
...
It would be replaced by a float resolution factor
2016-04-21 09:28:44 +02:00
821e3ff294
gsdx-ogl: reduce length of debug message
2016-04-21 09:28:44 +02:00
8217c717f6
gsdx-ogl: require GL_KHR_debug
...
Will reduce the slowdown on debug build
2016-04-21 09:28:44 +02:00
9598417f42
gsdx-ogl: GL_ARB_copy_image is now mandatory
2016-04-21 09:28:44 +02:00
99bccc6dff
gsdx-ogl: remove the geometry shader blacklist for Gallium Mesa drivers
2016-04-21 09:28:44 +02:00
cb8088216b
Merge pull request #1281 from PCSX2-Alpha/NTSC_saturation
...
GSDX: Remove some unnecessary/dubious hacks
2016-04-21 09:28:30 +02:00
59ef668fd2
Merge pull request #1222 from PCSX2/gsdx-black-fmv
...
Gsdx black fmv
2016-04-21 09:25:36 +02:00
994c9147f5
textureSW: fix Map with offset
2016-04-19 21:22:53 +03:00
dcb676765e
GSdx: Clean up some warning under windows ( #1289 )
2016-04-14 11:00:58 +01:00
2e567d6d55
gsdx ogl: update comment
...
something to test in the future
2016-04-14 10:19:18 +02:00
d129aedfe8
GSdx:vector: add sllv32 and srlv32 for 128 bits op
...
(variable shift)
2016-04-14 10:18:43 +02:00
8a7184be3f
gsdx: fix hack logic
2016-04-12 11:36:24 +02:00
6a09fa56fb
gsdx: disable nocturne CRC hack
...
Yeah one less !
2016-04-11 22:41:19 +02:00
4611264ce3
gsdx: add CRC hack for Nocturne PAL
...
Reduce depth transfer to the real size of the game. Otherwise
we need to handle a mix of color/depth transfer.
2016-04-11 16:04:04 +02:00
22a40b65ae
gsdx-ogl: always use 1 for GL_UNPACK_ALIGNMENT
...
Avoid a gl function call for each texture uploads
2016-04-11 12:45:11 +02:00
fdae698f07
SPU2-X: Correct project settings for devel profile. Fixes #1288
2016-04-11 01:15:07 +01:00
d158d4de51
windows: Move baseclasses to a separate project
...
It saves the buildbots from needlessly recompiling the files for each GSdx
configuration.
2016-04-11 00:22:31 +01:00
847b57907e
Revert "gsdx-ogl: add a new hack to force anisotropic filtering"
...
This reverts commit 53690cf9d0
2016-04-10 17:30:49 +02:00
2941adf364
gsdx ogl: use the new pipeline API
...
Pre build all SW shader into pipeline.
Directly bind the pipeline instead of all pipeline stages. (less work for the driver)
2016-04-10 17:28:05 +02:00
95e3dcb448
gsdx-ogl: improve the shader program management
...
* keep a reference of program/pipeline created to ease the deletion
* extend a bit the API to support multiple pipeline
Final goal will be to use a pre link pipeline for SW shaders. And uses
the default pipeline for HW shaders.
2016-04-10 17:05:33 +02:00
395e2f31d0
gsdx-ogl: remove dead code (due to legacy removal)
2016-04-10 14:23:58 +02:00
3f404c8edb
gsdx-ogl: update shader pipeline intertace to use vs/gs/ps triplet
...
Better to have 1 function calls with 3 parameters rather 3 functions call with 1 parameter.
2016-04-10 14:14:30 +02:00
53690cf9d0
gsdx-ogl: add a new hack to force anisotropic filtering
...
By default, anisotropic filtering was disabled when textures aren't countinuous.
This hack allows to force it. It can help to reduce aliasing but it would create
unexpected effect on texture boundaries.
Again, someone ought to add the option on Windows too
2016-04-10 13:53:17 +02:00
9e6cb79f4e
gsdx linux: move depth option as a speed hack
...
Someone ought to add the Windows option too (and DisablePartialInvalidation too)
It might break a couple of games but most of them run better with depth enabled.
2016-04-10 13:22:55 +02:00
12443da00c
GSdx ogl: ouch the typo exp != exp2
...
Fix some rounding issue on depth effect (shadow in Dot hack games)
2016-04-10 11:31:40 +02:00
c2a9118186
debian: add the GSdx legacy build
2016-04-10 11:31:40 +02:00
7aaf36d24d
gsdx ogl: add function pointer for framebuffer no attachment extension
...
Could be useful in the future
2016-04-10 11:31:40 +02:00
7cc13ce99c
gsdx-ogl: only bind the FB to the draw FB
2016-04-10 11:31:40 +02:00
d533c393b2
gsdx ogl: rely on DSA API
2016-04-10 11:31:40 +02:00
fb97de7f79
gsdx:windows: Fix crash on psx side of plugin
...
I forgot it had a psx emu interface.
2016-04-09 19:56:23 +01:00
b9e8384c11
gsdx-ogl: move the mandatory extension into mandatory section
2016-04-07 22:29:35 +02:00
121e92a829
gsdx ogl: remove a now useless warning message
2016-04-07 22:28:11 +02:00
4475c4fe7c
gsdx linux: remove the old extension options
2016-04-07 22:27:33 +02:00
cef76de547
gsdx ogl: GL_ARB_direct_state_access is now mandatory
2016-04-07 22:27:28 +02:00
a62019a3fd
gsdx-ogl: found_GL_ARB_buffer_storage is now mandatory
2016-04-07 22:17:22 +02:00
52e3c3516d
gsdx-ogl: GL_ARB_separate_shader_objects is now mandatory
2016-04-07 22:11:35 +02:00
f751f70b1e
gsdx ogl: GL_ARB_clip_control is now mandatory
2016-04-07 21:57:54 +02:00
dfb4b5a339
gsdx-ogl: GL_ARB_texture_barrier is now mandatory
...
(GL4.5 extension)
2016-04-07 21:51:37 +02:00
1208dbe8c7
cmake: add an option to build the new legacy GSdx plugin
...
+ bump the new one to 1.1.0 (to ease reporting)
2016-04-07 21:46:42 +02:00
8751203986
fork GSdx into a GSdx_legacy plugin
2016-04-07 21:27:55 +02:00
8ccdc05c08
Merge pull request #1217 from PCSX2-Alpha/CRTC_option
...
GSDX : Add an option for CRTC size and some other video mode stuffs
2016-04-07 21:24:46 +02:00
17886a9808
gsdx-ogl: allow some accurate date when GL_ARB_shader_image_load_store isn't supported
...
Close #1282
2016-04-07 19:29:46 +02:00
69a84a2782
gsdx:windows: Don't call GSshutdown in GSconfigure
...
Fixes an issue with the D3D backends crashing if the configure dialog
is accessed and ok is pressed. The D3Dcompiler dll is freed and a null
pointer is dereferenced.
It might break gsdxgui but GSshutdown really should not be called unless
GSdx is shutting down. GSDumpGUI on Windows provides the same (or
better) functionality.
2016-04-07 18:18:36 +01:00
a1b0ae467e
GSDX: Remove dubious/unnecessary hacks
...
* Silent Hill 2 doesn't need the CRC hack
* GSRenderer: no need to explicitly set bottom value for r.
* Texture Cache: Removed a check which couldn't possibly enter true
branch.
2016-04-07 15:15:39 +05:30
69c9a3d793
GSDX: Add an option to disable NTSC saturation
...
v2: convert it into a member variable.
2016-04-07 15:15:17 +05:30
e16b367e6e
windows: Workaround weird LoadLibraryEx failures
...
For some reason some Windows 7 systems (most are unaffected) cannot cope
with LoadLibraryEx and return error code 87 - "The parameter is
incorrect".
Switch to using LoadLibrary instead for any case where Windows 7 is
expected to successfully load the requested dll. Potentially Windows
Vista is also affected.
2016-04-06 19:52:59 +01:00
da9577076c
Merge pull request #1278 from PCSX2/gsdx-EE-read-depth-support
...
gsdx ogl: allow to read the depth buffer
2016-04-06 12:20:16 +02:00
b8a023d158
gsdx ogl: mark OGL object as final
...
Give the compiler more devirtualization hint
2016-04-05 00:01:43 +02:00
decac5fd12
gsdx ogl: implement an empty BeginScene
...
Compile will devirtualize it and then remove it during the inline.
2016-04-04 23:32:11 +02:00
cb279ef321
gsdx ogl: help compiler to devirtualize
2016-04-04 23:12:31 +02:00
e3787b6b3c
gsdx-ogl: use final qualifier to help compiler
...
Improve Devirtualization optimization
2016-04-04 22:52:59 +02:00
771583c559
gsdx-ogl: help the compiler to propagate stride constant
...
Optimize various multiplication
Note: potentially we can do it with constexpr but I'm not sure of compiler support
2016-04-04 22:46:31 +02:00
8943a9db4a
gsdx hw: GS can draw 2 frames in a single framebuffer
...
So let's increase the height. It will increase the memory requirement on some games
v2: try to do it automatically
(not sure it will useful as most game will requires it)
v3: let's back to an hardcoded 1280 size. It generates too much issue
2016-04-04 21:30:40 +02:00
063d2e568a
gsdx tc: re-implement frame lookup
...
Try to avoid random black screen frame
v2: don't force the preload hack on the frame
It creates a ghost image over FMV
v3: support offset within a frame
2016-04-04 21:30:37 +02:00
eec74fd963
gsdx hw: Add an alternate draw call for FMV rendering
...
The long story:
Game blits FMV far aways of the RT which is actually the input of the RO texture...
Currently GSdx suffers of 2 bugs.
1/ RT is too small
2/ texture isn't properly updated with the rendered value. Texture is invalidated
but it reads back the pixels from the GS memory whereas the correct
value is located on the GPU.
This commit will replace the standard draw by a manual blit. Therefore it avoid
size issue and bad upscaling issue.
v2:
* Use various copy to be more compatible with dx api
* Move all part of the hack info the BlitFMV function
v3: add log message
2016-04-04 21:29:32 +02:00
72d43b2e56
gsdx tc: add an invalidation procedure to drop sub rt
...
It will be used in next commit. However, it might not be the best solution
2016-04-04 21:29:32 +02:00
2ca624c8c6
gsdx tc: implement a read function of Source texture
...
It will be used in the following commit
2016-04-04 21:29:31 +02:00
d922225e69
gsdx tc:invalidate RT when a texture is written inside it
...
It often happens the game try to upload the FMV directly which typically
gave a black screen.
Commit fix rules of roses and I hope various black screen FMV
Performance impact must be tested, and I'm afraid of strange texture cache behavior.
V2: check the size of the transfer too
V3: add support of 16 bits format
V4: avoid division by 0
2016-04-04 21:29:31 +02:00
9aea76b0e8
gsdx tc: store a hint on the target size
...
The hint is based on the rendering
2016-04-04 21:29:31 +02:00
c4ebdd1f37
gsdx ogl: allow to read the depth buffer
...
Unfortunately can't be tested on gs dump
Ought to impact #1276 (Incognito/Eat Sleep Play's games, Nocturne too)
2016-04-03 12:30:14 +02:00
00643dbdfb
gsdx tc: report unsupported depth read path
...
Help to debug depth issue (aka lighting effects pass through wall)
2016-04-03 11:22:11 +02:00
ee08a6fc53
Merge pull request #1270 from PCSX2/monolithic-build
...
Monolithic build
2016-04-03 11:20:07 +02:00
5bdadbc089
Merge pull request #1268 from PCSX2/coverity-uninitialized-members
...
Coverity uninitialized members
2016-04-03 11:19:37 +02:00
7736c90457
gsdx:windows: Fix Windows 7 compile
...
Somehow D3D_COMPILE_STANDARD_FILE_INCLUDE isn't defined, so the correct
headers aren't being used.
2016-04-02 12:17:52 +01:00
cc1756b8e5
gsdx: disable dump in release build
2016-04-02 00:56:41 +02:00
b42ddba13c
onepad: repopulate option at the init
...
CID 159402
2016-03-30 19:56:19 +02:00
8dee7daeb9
gsdx-ogl: init textures for all formats
...
CID 150171
2016-03-30 19:56:19 +02:00
856a12f94f
gsdx-ogl: init Render object
...
CID 147002
2016-03-30 19:56:19 +02:00
a4d0c23071
gsdx: init GSCapture field
...
CID 159404
2016-03-30 19:56:19 +02:00
1bd8113f66
cmake: add various option to disable plugin support
2016-03-30 10:19:54 +02:00
e347c8b0b1
gsdx:windows: Remove DXSDK references from property sheets
...
GSdx doesn't use the DirectX SDK anymore.
Also clean up the property sheets while I'm at it.
2016-03-30 00:03:04 +01:00
b243e2532b
gsdx-d3d9: Remove d3dx9 stuff and use d3dcompile
...
Using D3DX9 requires the end user to install the Direct X redist files.
Switch to using D3DCompile.
2016-03-30 00:03:04 +01:00
2ec8d88d80
gsdx-d3d11: Remove d3dx11 stuff and use d3dcompile
...
Using D3DX11 requires the end user to install the DirectX redist files.
Switch to using D3DCompile, and distribute D3DCompiler_47.dll for
Windows Vista, 7 and 8 users (Windows 8.1 onwards supplies
D3DCompiler_47.dll with the OS).
2016-03-30 00:03:04 +01:00
8f4823d604
gsdx-dx: Load D3DCompiler dll at runtime
...
D3DCompiler_47.dll will be loaded for Windows 8.1 and above (and maybe
Windows 7 devs), D3DCompiler_43.dll will be loaded for Windows 7 and
below.
2016-03-30 00:03:04 +01:00
80b6140a3e
gsdx:windows: Prefer Windows SDK over old DX SDK
...
Some files are present in both the Windows SDK and the old DirectX SDK.
Use the newer versions of the files in the Windows SDK where possible.
2016-03-30 00:03:04 +01:00
7f3f6e96d8
cdvdgigaherz: Use Windows SDK headers
...
The rosddk headers are no longer necessary and have been removed.
2016-03-29 23:51:17 +01:00
f6ee94589f
gsdx hw: OI_GSMemClear supports various frame formats
...
Could help #1267
2016-03-28 10:47:42 +02:00
587c0ea339
Merge pull request #1237 from turtleli/xinput
...
lilypad|xpad: Remove DirectX SDK dependency, support both XInput 1.3 and 1.4
2016-03-28 09:46:58 +01:00
a99750ae87
gsdx hw: only enable OI_GsMemClear when both depth/alpha test are disabled
...
Fix #1262
2016-03-26 11:28:28 +01:00
261ef9ab6a
gsdx: move some DBZGT hacks to Dx level
...
Based on this thread:
http://forums.pcsx2.net/Thread-Dragon-Ball-Z-Budokai-Tenkaichi-3-Graphical-Issue-Emulator-does-not-render-outlines
2016-03-25 08:23:50 +01:00
791a14bec0
gsdx linux: add a gui box to select the png compression level
2016-03-25 08:23:50 +01:00
a80a7175f3
xpad: Use the Windows SDK and remove unneeded dependencies
2016-03-23 19:12:44 +00:00
13bb7cf30a
xpad: Support both XInput 1.3 and 1.4
2016-03-23 19:12:43 +00:00
205b496d5c
gsdx: fix gl recording regression
2016-03-21 18:52:26 +01:00
8e5e770fd1
gsdx hw: Ensure GS memory is always cleared properly
...
It will fix some issues on FMV
Previous behavior can be restored with the hack "UserHacks_DisableGsMemClear"
Fix #768
And maybe #855
2016-03-21 18:26:22 +01:00
c43b1ac201
gsdx tc: extend the fast invalidation hack to limit the size of target read
...
It actually removes the previous hack that read the full target.
Unfortunately snowblind engine game uses big target so the read is very big too (1280x448)
which is killer for the perf. Whereas the game requires only 24x12 texels
Give a 2x speed boost on Champion of Norrath !!!
2016-03-20 18:11:44 +01:00
46ff5dccff
gsdx: be debug friendly
2016-03-20 16:15:00 +01:00
a83b8d62ec
gsdx linux: add a gui checkbox for the "fast texture invalidation" hack
2016-03-20 13:59:24 +01:00
7eb242d3ad
gsdx-ogl: remove the ogl_texture_storage option
...
The previous commits make PBO faster for all drivers.
2016-03-19 01:00:52 +01:00
68aa182b16
gsdx-ogl: sort the texture upload code
...
I wanted to do a separate path for palette texture. So far, it isn't very
conclusive.
2016-03-19 00:58:58 +01:00
46a4d2dc47
gsdx-tc: add UserHacks_DisablePartialInvalidation for snowblind engine game
...
Games uses very special texture with a lots of repeating.
It is much faster to send the full texture rather than trying to partially invalidate it.
On my gs dump:
FPS: 29 => 68 !
2016-03-19 00:25:58 +01:00
eb69522641
gsdx-ogl: optimize texture memory upload
...
Previous code was
1/ unpack texture into local buffer
2/ copy local buffer into gl buffer
3/ copy gl buffer to texture
New code is
1/ unpact texture directly into gl buffer
2/ copy gl buffer to texture
Perf increase (done in native)
DQ8: 255 -> 270 (+5%)
Colin: 126 -> 135 (+8%)
ZoE: 50 -> 54 (+8%)
2016-03-18 20:24:42 +01:00
da741e294e
gsdx-ogl: optimize GPU->CPU memory transfer size
...
Might help for snow engine game (a little)
Previous code use to read the full texture whereas now it will be limited
to the size of the useful data.
2016-03-18 20:24:42 +01:00
02ea7d390c
lilypad:windows: Switch to includes from Windows SDK
2016-03-17 23:58:19 +00:00
834652922a
lilypad:windows:xinput: Only support 1.3 and 1.4
...
1.3 is used on Vista and 7, so we don't need earlier versions.
2016-03-17 23:58:18 +00:00
490cb757bf
lilypad:windows: Clean up property mess
...
I probably should have used property sheets as well, but it's still a
good improvement. It does cut down quite a few 64-bit warnings.
2016-03-16 20:54:54 +00:00
a487aaf952
Merge pull request #1232 from turtleli/nonxp-toolkit
...
windows: Switch to Non-XP compatible toolkits
2016-03-16 20:34:27 +00:00
c829826870
Merge pull request #1231 from turtleli/cdvd-fixes
...
cdvdgigaherz: Dual layer DVD fixes
2016-03-16 19:55:20 +00:00
bfbc6de7b5
cdvdgigaherz: Fix Dual layer DVD layer 1 read
...
ReadFile reports that the DVD is reading from the end of file when
attempting to read any layer 1 sectors.
Use the FSCTL_ALLOW_EXTENDED_DASD_IO ioctl to prevent the file system
driver from carrying out boundary checks.
2016-03-16 17:55:27 +00:00
2213564977
cdvdgigaherz: Fix TOC creation
...
cdvdgigaherz only determines whether there is no disc, a CD, a single
layer DVD or dual layer DVD in the drive. It does not detect whether a
CD/DVD is a PS2 CD/DVD or not.
Fix the missing TOCs.
2016-03-16 17:55:26 +00:00
9e2f309e30
cdvdgigaherz: Fix incorrect dual-layer DVD track info
...
Single-session DVDs only have 1 track, regardless of whether the DVD is
single or dual layered.
2016-03-16 17:55:19 +00:00
643db78cc4
cdvdgigaherz: Fix last resort DVD size calculations
...
The calculated size values were off by one for single layer DVDs, off by
two for dual layer PTP DVDs, and just wrong for OTP DVDs.
Usually the IOCTL_DISK_GET_LENGTH_INFO ioctl will have succeeded already.
2016-03-15 23:20:06 +00:00
41986f4307
cdvdgigaherz: Remove unneeded IOCTL_DVD_READ_STRUCTURE ioctls
...
Only 1 IOCTL_DVD_READ_STRUCTURE ioctl call is necessary for determining
the DVD media type and layer break address. All the necessary
information is already present in the layer 0 physical descriptor.
2016-03-15 23:19:10 +00:00
0ef8ddb2a2
Merge pull request #924 from kust2708/onepad-gui
...
Onepad GUI for Linux - New wxWidget interface
2016-03-15 20:23:44 +01:00
7292955600
cdvdgigaherz: Fix sector address endian issue
...
The sector addresses returned when reading the layer information from a
DVD are big-endian. Convert the addresses to little endian.
2016-03-15 17:34:36 +00:00
5db0d682b8
cdvdgigaherz: Fix detection typo
2016-03-15 17:34:35 +00:00
d07076b9d4
cdvdgigaherz: Dual layer DVD type/layer 1 start LSN fixes
...
For dual layer DVDs, CDVDgetDualInfo() should return the first layer 1
LSN, not the last layer 0 LSN, which is what GetLayerBreakAddress()
returns. This matches what the internal ISO reader returns.
Also, PTP DVDs should return a value of 1 for the media type, not 2.
Finally, adjust the CDVDgetDualInfo() return value so PCSX2 correctly
recognises dual layer DVDs.
2016-03-15 17:28:43 +00:00
9b0ecdf43f
GSDX-OGL: gray out MSAA on opengl renderer
...
It's currently unimplemented on OpenGL renderer.
2016-03-14 18:38:40 +05:30
b516c1001a
windows: Set _WIN32_WINNT to 0x0600 (Windows Vista)
2016-03-13 13:41:16 +00:00
9ed9b2d8cd
windows: Switch to DefaultPlatformToolset aka non-XP toolsets
...
Basically I ran
find . -name "*.vcxproj" -exec sed -i -e 's/_xp//' {} \;
This will likely break XP, but it paves the way on Windows for a PCSX2
that does not require the DirectX redistributables to be installed for
Windows 8, 8.1 and 10 users. Windows Vista and 7 users will still require
the DirectX redistributable files for XInput and XAudio, though PCSX2
should still be capable of running if a user does not actually use either
of them.
2016-03-13 12:04:28 +00:00
653998e005
gsdx: add vertex data offset in comment
...
Avoid to recompute them every time I want to decode the vertex stream
2016-03-12 15:53:38 +01:00
de7d127c52
gsdx-ogl: create a small macro to load function pointers
2016-03-12 15:52:36 +01:00
95ef4e20f8
gsdx-ogl: load GL_ARB_viewport_array function pointer for the future
2016-03-12 15:52:36 +01:00
56c2e94daf
gsdx-ogl: sort extension requirement
...
All GL4 extensions supported by DX10 class GPU will be soon mandatory
Namely:
* GL_ARB_copy_image
* GL_ARB_texture_barrier
* GL_ARB_clip_control
* GL_ARB_direct_state_access
* GL_ARB_separate_shader_objects
* GL_ARB_buffer_storage
2016-03-12 15:52:36 +01:00
a3788c4e98
Merge pull request #1225 from PCSX2-Alpha/scaling_fix
...
GSDX: set a safe limit to Framebuffer width
2016-03-12 15:42:18 +01:00
997f0535f5
GSDX: Set a safe limit to Framebuffer width
...
There are likely few games (RE4) which constantly change the FBW register value causing the framebuffer width to be updated at every interval. Adding a safe limit (512) similar to frame buffer height would prevent such constant changes of the framebuffer width when FBW changes once again to an even lower value.
2016-03-11 07:28:05 +05:30
ec57f1305a
gsdx: detect rendering outside of the framebuffer
...
Could help to detect rendering issue (for example missing fmv)
2016-03-10 19:03:39 +01:00
bc73195193
gsdx-ogl: pack more tightly the FS UBO
...
Merge TA vec2 + Af vec1 into a single vec4
2016-03-10 18:29:05 +01:00
3e278a2e75
Merge pull request #1197 from turtleli/gsdx-png
...
Gsdx: PNG screenshots (Windows), use libpng directly
2016-03-08 23:49:56 +00:00
7b8616ac7b
gsdx-ogl: add function pointer for query object
2016-03-06 13:39:24 +01:00
6b950d0408
gsdx: Allow dump and capture PNG compression to be changed
...
Valid values for png_compression_level are from 0 (no compression) to 9
(max compression). The default is 1.
v2: Use zlib Z_BEST_SPEED (1) and Z_BEST_COMPRESSION (9) defines.
2016-03-02 22:58:45 +00:00
a97cbf038c
gsdx-d3d9: Save screenshots as PNG files
...
v2: Avoid unnecessary memory copy
2016-03-02 22:57:17 +00:00
d865efceb9
gsdx-d3d11: Save screenshots as PNG files
2016-03-02 22:57:16 +00:00
cf939620ea
gsdx-ogl: Save depth image as RGB and alpha images
2016-03-02 22:57:16 +00:00
97215008c9
ci|cmake|debian: Remove png++ build dependencies
...
GSdx now uses libpng directly. png++ is now unused, so let's remove it.
2016-03-02 22:57:15 +00:00
ee5861efc8
gsdx: Remove non-PNG code
...
It's no longer in use.
2016-03-02 22:57:12 +00:00
38edd77034
gsdx-ogl:windows: Save screenshots as PNG files
...
v2: Add zlib directory to property sheet
2016-03-02 22:52:08 +00:00
87dcfbc645
gsdx-png: Use libpng directly instead of via png++
...
v2: Increase compression to maximum
v3: Add zlib to GSdx build dependencies
v4: Reduce memory usage
2016-03-02 22:48:54 +00:00
edef3ad8c3
Merge pull request #1170 from PCSX2-Alpha/TC_Scaling
...
GSDX: Detect RT size based on display and frame registers.
2016-03-02 13:51:28 +01:00
2d4e2fb8cb
windows: spu2-x does not use the emitter
...
So let's not specify it as a build dependency.
Also remove some unnecessary manual library linkage and remove the
wsWidgets GUI property sheet, which does nothing useful.
2016-02-28 11:08:08 +00:00
bfeb3e801a
gsnull: Remove GSsetWindowInfo
...
PCSX2 doesn't actually use it.
GSnull also seems a bit behind the current GS plugin API - perhaps it
should be removed.
2016-02-28 02:45:59 +00:00
6c7cfe9e4d
xpad: Change to Unicode project and remove unused headers
...
Also remove an unnecessary ASSERT define, and delete the copy
constructors.
2016-02-28 02:45:10 +00:00
de5f7f70e2
OnePad: Fix multi-gamepad support
...
Can change the number of gamepad with the constant GAMEPAD_NUMBER in the onepad.h file
2016-02-27 22:11:08 +01:00
0b0e2a3f34
Onepad : Fix compilation with wx2.8
...
Feedback fix, when more than two gamepad are used simultaneously.
Change all 'this->' by 'm_'
fix on the hack sixaxis pressure
Modification of the size (1000x760 -> 1000x730)
2016-02-27 21:45:37 +01:00
02b5d80bb9
Onepad : Modification for the new background
...
Add new checkbox for the hack ds3 pressure
2016-02-27 21:45:37 +01:00
0e602ab50b
OnePad : Add set all buttons + fix bug
...
Can set all buttons. Buttons labels are not printed correctly in spite of update and refresh
The cause of this problem come from the while in the config_key function which monopolise ressources
Add arrow pictures implementation
OnePad : bug fixed (assert failure)
Modification of copyright
2016-02-27 21:44:58 +01:00
85489d05e0
lilypad:windows: Set Unicode in project file instead
...
Also move the DirectInput define.
2016-02-25 23:36:11 +00:00
6fa7a8989c
lilypad:windows: LoadLibrary is not required for Raw Input
...
It's been available since XP and it's not special like XInput (where we
might have SCP in the middle) so let's have the linker resolve the
functions at link time.
2016-02-25 23:36:11 +00:00
fd8c762772
lilypad: Fix gcc strict-aliasing warning
...
The fixme I added was likely wrong. Not sure what I was thinking.
2016-02-25 23:36:11 +00:00
b07b06a9fb
GSDX-Texture Cache: Rework scaling function
...
The following patch uses the height value of the display rectangle rather than make an estimation of the Frame buffer height when the game uses a non-referenceable height (or) width.
2016-02-24 09:14:01 +05:30
cb776d2f50
gsdx:atomic: better match the old if(!_interlockedbittestandset(&m_mapped, 0)) behavior
...
Thanks @turtleli
2016-02-23 18:43:44 +01:00
f9b4ff17a5
gsdx: drop interlocked* function on linux
2016-02-22 19:12:50 +01:00
a601991f91
gsdx: add atomic for transaction scope object
2016-02-22 19:12:50 +01:00
f904cd6c4a
gsdx: add atomic for SW Renderer
...
V2: fix assertion
2016-02-22 19:12:37 +01:00
9bbb0fe1f6
gsdx: add atomic for texture upload
...
V2: fix init of atomic flag object
2016-02-21 18:17:53 +01:00
a66c911fed
cmake: factorize debug/dev define
2016-02-21 16:17:10 +01:00
9ba470fc63
gsdx-ogl: properly handle t_float in GS
...
f8c442cf76
2016-02-21 11:48:30 +01:00
bef8447447
Merge pull request #1186 from PCSX2/gsdx-unoptimize-vs
...
gsdx-ogl: make VS more generic
2016-02-20 10:39:19 +01:00
6002719c8c
Merge pull request #1185 from PCSX2/tekken5-fast-depth
...
gsdx: no depth lookup optimization
2016-02-20 10:24:21 +01:00
1853d0d16d
gsdx: no depth lookup optimization
...
Don't lookup a depth buffer if depth test is always pass without write
Boost performance on Tekken5 when depth emulation is enabled in openGL
(Tekken5 sets same address for both the RT and the depth but depth is disabled)
v2:
Keep ds if DATE is enabled (some implementation uses a stencil buffer)
Be more aggressive to avoid an useless depth lookup
2016-02-18 20:35:50 +01:00
f8c442cf76
gsdx-ogl: make VS more generic
...
Texture coordinate could be dummy/float/int integral/int normalized.
Old behavior:
* VS was in charge to select the texture coordinate
* int integral format wasn't supported
New behavior:
* Always compute all formats
* FS will be in charge to select the good format
Impact:
* VS will be slightly slower but it reduces shaders permutation from
little to 0 (won't be bad for CPU)
* FS speed isn't impacted as 2 separate code paths were already required
to support both format
* Rasterizer will be 33% slower but unlikely to be the limited factor of
the GPU
* In future we could directly use the integral format in the FS.
V2: remove useless PSin_t
2016-02-18 19:02:05 +01:00
0dadc124d3
gsdx-ogl: invert behavior of unsafe user hack
...
It would be on by default. Unsafe & fast path.
The hack is a security if someone encounters any issue
v2: update Windows gui file
v3: fix typo in tooltip and linux gui
2016-02-18 18:48:13 +01:00
b910e20413
Update GSCrc.cpp
...
added french version of Simpsons The Game 0x5C1EBF61
2016-02-15 21:56:53 +01:00
909584d473
GSDX: Disable Nvidia hack when in native res
2016-02-15 20:27:51 +00:00
999166fa58
lilypad: Fix some gcc and clang warnings
...
Fixes writable-strings, missing-braces, and undefined-inline warnings.
2016-02-14 22:25:17 +00:00
2b558a9606
lilypad: Make command/response debug output portable
...
It also makes the log viewable in Windows Notepad.
Also fix an off-by-one and fix the missing C++ exception settings.
2016-02-14 22:25:17 +00:00
823a37aed7
OnePad : New GUI based on gwWidget
...
Buttons done, configuration initialization done.
Still need to add Gamepad and Joysticks configuration frames.
Require png file for the moment (the embedded picture will be fixed after).
New Onepad GUI based on wxWidget (Main frame almost finish)
Background picture is now embedded
Button binding works
Loading and saving works
Need to add feedback and gamepad, joysticks configuration frame
Modification of the onepad CMakeList.txt
Automatic generation of images headers using perl script
Modification of the test feedback function
2016-02-14 17:26:31 +01:00
5b287deca2
Onepad : Add GUI images
2016-02-14 17:25:28 +01:00
2b61edb80d
lilypad:windows: Remove NO_CRT configurations
...
It's Windows-only and isn't actually used.
2016-02-14 13:24:59 +00:00
8ae7f60b04
Merge pull request #1175 from PCSX2-Alpha/GSDX_stuffs
...
GSDX: Vertical frequency corrections and extra stuffs
2016-02-13 18:15:49 +01:00
dc347e4854
Merge pull request #1178 from PCSX2/opengl-release-mode
...
gsdx-gl: use CONTEXT_FLAG_NO_ERROR_BIT_KHR to reduce driver overheard
2016-02-13 18:13:05 +01:00
c47501d228
lilypad: Fix function name typo
2016-02-13 15:03:31 +00:00
77f9113301
gsdx-gl: use CONTEXT_FLAG_NO_ERROR_BIT_KHR to reduce driver overheard
...
Didn't test it yet as my driver is too old.
Note: might break the open source drivers.
2016-02-13 15:28:11 +01:00
255a62dd21
Merge pull request #1144 from ekudritski/ekudritski-popn-patch-1
...
Add pop'n music controller support to LilyPad.
Also fix some warnings.
2016-02-13 00:15:15 +00:00
e2c5236706
Just some cleaning
2016-02-12 09:57:08 +02:00
e810428c86
GSDX: Remove some old comments
...
Disgaea 2 intro FMV now works fine with/without upscaling. (confirmed
with rama)
2016-02-12 12:05:42 +05:30
465cfb4fad
PCSX2-GSFrame: Make upscaling impact resolution values
2016-02-12 11:57:41 +05:30
67a7a63a36
GSDX: Add vertical frequency for all video modes
2016-02-12 05:28:30 +05:30
1445bf7fb1
GSDX: Extend macros for all video modes.
...
The following patch detects the other video modes based on Phased lock loop divider (LC)
2016-02-12 04:43:57 +05:30
253e801f51
linux: enable float operation on SSE unit
...
Potentially faster and requires to flush denormal float to 0
2016-02-09 18:24:12 +01:00
0b362fd866
GSdx: Fix spelling issues in GSdx Linux configuration window
2016-02-08 19:14:56 +01:00
51b40c6b18
gsdx: move black CRC hack from openGL to DX level
...
Rendering is much nicer this way
2016-02-06 17:32:12 +01:00
93dc772565
GSdx: Missed a _WINDOWS usage...
...
Visual Studio Find and Replace can only be trusted if all the files are
included in the project. I suppose it's time to add any missing files
to the relevant projects...
2016-02-04 19:12:46 +00:00
8c5c4608d2
LilyPad: Add support for Pop'N Music Controller
2016-02-01 15:45:26 +02:00
85f64b8c08
Merge pull request #1137 from PCSX2-Alpha/CRTC_Scaling
...
PCRTC: Proper handling for 720P/1080P video modes.
2016-02-01 10:11:58 +01:00
c889659ad7
GSDX: Prevent a bad division
...
GetDeviceSize() already does a half division based on the INT and FFMD
registers.
2016-01-30 05:20:06 +05:30
7407162dfe
GSDX: Add some nice macros
2016-01-30 05:19:53 +05:30
841df74010
gsdx: add info to get a working driver
2016-01-28 21:18:24 +01:00
Gregory Hainaut