be1403cdc2
gsdx-ogl: support texture shuffling on !FST
...
Mostly fix "Finding Nemo"
It remains a shadows issue when you enable accurate_fbmask and depth
2015-07-01 09:36:54 +02:00
beafbd9768
gsdx: add a warning for the future
2015-07-01 09:36:54 +02:00
6121677aa1
gsdx-tc: use a single shader pass to convert texture in 8 bits format
...
It might save a couple of fps
Add a define to test the perf if we keep only the blue channel. It brokes
the code in Prince Of Persia that use the Red/Green channel... Maybe the
speed hack :( Or find a way to replace all if with a lookup table
Note: it is only supported on OpenGL currently
2015-07-01 09:36:54 +02:00
2ecca529d1
gsdx-tc: log dirty target
2015-07-01 09:36:54 +02:00
e2727f10ba
glsl: fix for AMD
...
I hope :)
2015-07-01 09:36:54 +02:00
2af7dcbda2
gsdx-tc: GPU accelerate 8 bits texture when upscaling is enabled
...
Code unscale the texture to ease the conversion. Quality is awful (same as before)
but I'm not sure we can support an upscaled texture
Maybe the quality loss is due to the reduction without mipmap
Maybe the best solution will be to add an hack to extract the blue channel
(with texture swizzle), and uses a "full page/screen" spirte instead.
(it would be faster too)
Note: won't be compatible with MSAA (but gl doesn't support it anyway)
2015-07-01 09:36:54 +02:00
6ca7a802bf
gsdx-tc: add a big comment to explain the scaling of src in TC
2015-07-01 09:36:54 +02:00
d29e375f72
gsdx-tc: GPU accelerate 8 bits texture conversion
...
Only native is supported currently
2015-07-01 09:36:54 +02:00
a8bcc760b4
gsdx-tc: only clean RT in openGL
...
It is a debug feature for myself
2015-07-01 09:36:54 +02:00
3f6edc39cf
gsdx-linux-gui: update option
...
Add mipmap for SW
Add tc depth for HW
Remove nvidia MT, always on
2015-07-01 09:36:54 +02:00
db5468afcf
glsl: fix shadow on Shin Megami Tensei Nocturne
2015-07-01 09:36:54 +02:00
61a717db14
gsdx-tc: clean the RT in debug build
...
// In theory new textures contain invalidated data. Still in theory a new target
// must contains the content of the GS memory.
// In practice, TC will wrongly invalidate some RT. For example due to write on the alpha
// channel but colors is still valid. Unfortunately TC doesn't support the upload of data
// in target.
//
// Cleaning the code here will likely break several games. However it might reduce
// the noise in draw call debugging. It is the main reason to enable it on debug build.
//
// From a performance point of view, it might cost a little on big upscaling
// but normally few RT are miss so it must remain reasonable.
2015-07-01 09:36:53 +02:00
99b03b4632
gsdx-debug: log all write (texture) from the EE
...
It is verbose but it might help to understand the invalidation of texture
2015-07-01 09:36:53 +02:00
e66aac8ab7
gsdx-hw: add an hidden option to preload the final frame with GS mem data
...
Game can directly uploads a background or the full image in
"CTRC" buffer. Previous code was a full black screen.
It will also avoid various black screen issue in gs dump.
hidden option: preload_frame_with_gs_data
Note: impact on upscaling was not tested and it's likely broken
2015-07-01 09:36:53 +02:00
a751db5f2b
gsdx-ogl: merge 2 log (too verbose otherwise)
2015-07-01 09:36:53 +02:00
85543db094
gsdx-tc: trace the alpha channel update in TC
...
Improve the rendering in MGS3 (even if the game is still broken
due to others TC issues)
// Typical bug (MGS3 blue cloud):
// 1/ RT used as 32 bits => alpha channel written
// 2/ RT used as 24 bits => no update of alpha channel
// 3/ Lookup of texture that used alpha channel as index, HasSharedBits will return false
// because of the previous draw call format
//
// Solution: consider the RT as 32 bits if the alpha was used in the past
2015-07-01 09:36:53 +02:00
4a65e5e723
gsdx-tc: don't try to read a 0 pixels texture
...
"Regression" introduced in 8 bits RT support
The case appears when
1/ address of RT is the same as input texture
2/ input format is 8 bits
3/ previous lookup of RT was miss
2015-07-01 09:36:53 +02:00
a588f61a8a
gsdx: add an assert for unsupported case
2015-07-01 09:36:53 +02:00
9802ba6621
gsdx-tc: add support of pseudo 8 bits RT conversion
...
Code is obviously slow but at least it works.
It fixes the blur effect of VP2
2015-07-01 09:36:53 +02:00
77e718c61f
gsdx: disable linear interpolation when converting texture in texture cache
...
It avoid various upscaling glitches on GS post-processing effect
// 1/ Palette is used to interpret the alpha channel of the RT as an index.
// Star Ocean 3 uses it to emulate a stencil buffer.
// 2/ Z formats are a bad idea to interpolate (discontinuties).
// 3/ 16 bits buffer is used to move data from a channel to another.
//
// I keep linear filtering for standard color even if I'm not sure that it is
// working correctly.
// Indeed, texture is reduced so you need to read all covered pixels (9 in 3x)
// to correctly interpolate the value. Linear interpolation is likely acceptable
// only in 2x scaling
//
// Src texture will still be bilinear interpolated so I'm really not sure
// that we need to do it here too.
//
// Future note: instead to do
// RT 2048x2048 -> T 1024x1024 -> RT 2048x2048
// We can maybe sample directly a bigger texture
// RT 2048x2048 -> T 2048x2048 -> RT 2048x2048
// Pro: better quality. Copy instead of StretchRect (must be faster)
// Cons: consume more memory
//
// In distant future: investigate to reuse the RT directly without any
// copy. Likely a speed boost and memory usage reduction.
2015-07-01 09:36:53 +02:00
ae3b768de9
bump gsdx version to 1.0.0
2015-07-01 09:36:53 +02:00
839003467e
gsdx-ogl: add support of partial frame buffer masking
...
It might help to fix a bit the color on a couple of games
accurate_fbmask = 1
Code uses GL4.5 extensions. So far it seems the effect is ony used a couple
of time and often in non-overlapping primitive. Speed impact will likely remain small
2015-07-01 09:36:53 +02:00
87f54ae0ff
gsdx: report error on unsupported case in texture cache
...
It seems to impacts lots of games that still have issue (VP2, MTG3, PoP)
The PSMT32 format is read a PSMT8. I think we need to convert it as PSMT8H (i.e.
unpack it to have only an alpha channel)
2015-07-01 09:36:53 +02:00
82818dab3c
gsdx-ogl: make some room in AlphaCoefficient variable
...
The idea will be to use the remaining int to store the FB mask
2015-07-01 09:36:53 +02:00
3b127f663b
gsdx-tc: trace the texture format to detect texture shuffling
...
It fixes games that uses 16 bits RT (like snow engine games)
2015-07-01 09:36:53 +02:00
33c9e9da0a
gsdx: new generic OI hack
...
To clear a (W, H) RT/Depth, GS can only send a (W , H/2) primitive with
a Z (or RT) pointer in the middle of the buffer
Top-half will be cleared by the color (or the depth).
Bottom-half will be cleared by the depth (or the color).
Code isn't enabled yet but it was tested with success on GoW2.
2015-07-01 09:36:35 +02:00
42e911c78f
gsdx-ogl: mask alpha channel in depth conversion
...
Might not work if depth is recasted as a rt (we lost the alpha channel)
2015-07-01 09:30:20 +02:00
05c72980fc
gsdx: avoid to detect PSMT8H as 16 bits
2015-07-01 09:30:20 +02:00
b62a2d6a3c
gsdx-debug: dump texture in 32 bits when a shuffing effect is detected
...
Otherwise it is unreadable
2015-07-01 09:30:20 +02:00
6b5a3dedd9
gsdx-debug: add the format in texture cache logging
2015-07-01 09:30:20 +02:00
955fc3aa35
GSdx-DX: Mirror round value change from OGL
2015-07-01 09:30:20 +02:00
af09d7e063
GSdx-DX: Modified shader slightly as some bits were incorrect.
2015-07-01 09:30:20 +02:00
7ee3dbd615
gsdx-tc: use the virtual function to check the state
...
This ways it will be disabled for dx
2015-07-01 09:30:20 +02:00
de189b67a2
GSdx: Add option to toggle Texture Cache Depth support.
...
- Forced off for DX currently to save fallover.
2015-07-01 09:30:20 +02:00
2dc4e2a04c
GSdx: Gave accurate blend option an extra state, can now do super accurate blending from the GUI
2015-07-01 09:30:20 +02:00
c925b1d135
gsdx-tc: support GS mem to depth buffer transfer
...
Please test SMT games
(issue #572 )
2015-07-01 09:30:20 +02:00
4bc8bfc23e
GSdx-DX: Rough port of texture switching from OGL
2015-07-01 09:30:20 +02:00
58ce7d4bb8
gsdx-ogl: emulate texture shuffle
...
GS doesn't supports texture shuffle/swizzle so it is emulated in a
complex way.
The idea is to read/write the 32 bits color format as a 16 bit format.
This way, RG (16 lsb bits) or BA (16 msb bits) can be read or written with
square texture that targets pixels 1-8 or pixels 8-16.
However shuffle is limited. For example you can copy the green channel
to either the alpha channel or another green channel.
Note: Partial masking of channel is not yet implemented
V2: improve logging
V3: better support of green channel in shader
V4: improve detection of destination (issue due to rounding)
2015-07-01 09:30:20 +02:00
2d812deb84
gsdx-tc: Depth and Target are interchangeable on the GS !!!
...
Extend the texture cache to search Color target in Depth target
2015-07-01 09:30:20 +02:00
76160505f7
gsdx-tc: add an option to avoid blow up dx :p
...
texture_cache_depth = 1 (default for openGL)
2015-07-01 09:30:20 +02:00
74d84aafb5
gsdx-tc: allow to search the depth in the old target list
...
Yes it is possible on PS2 world
2015-07-01 09:30:20 +02:00
b59a347ad7
gsdx-tc: allow to use depth buffer as input texture
2015-07-01 09:30:20 +02:00
49516cbbca
gsdx-tc: allow to invalidate the depth/target if it is used as target/depth
...
It is requires when game will uses sometimes an address as a RT sometimes as a depth
2015-07-01 09:30:20 +02:00
35081f922a
gsdx: GS kinds of support draw without framebuffer
...
Gow uses 24 bits buffer, so only color is updated but blending is configured as Cd
so it is a NOP
In this case, we don't lookup the target in the texture cache. It reduces the complexity
to handle depth which can be located at same address as RT
Note: please test DX renderer
2015-07-01 09:30:20 +02:00
c659b1aa18
Merge pull request #617 from ssakash/patch-26
...
Console log message for current renderer.
2015-06-28 13:24:09 +01:00
59a66f87c3
Merge pull request #611 from turtleli/fix-toggling
...
Fix renderer toggling behavior and other related stuff
2015-06-26 16:34:02 +03:00
acc6ad59ba
GSdx: Use correct renderer after config change
...
Rework the renderer selection logic to reload the saved renderer after
it's been changed in the config panel and to properly detect whether a
renderer toggle has been requested.
2015-06-26 00:50:07 +01:00
4b472bb461
Console log message for current renderer.
2015-06-25 20:15:45 +05:30
1d4dff9e42
Remove break statement (return already ends the function execution)
2015-06-25 19:48:22 +05:30
f3c0c1bb88
gsdx-ogl: TexParamami is provided in core
2015-06-25 10:25:57 +02:00
8393ba56d6
gsdx-ogl: rework palette texture handling
...
Redirect the red channel to alpha channel for 8 bits texture.
It avoid special management in the shader
2015-06-24 19:50:09 +02:00
cd4c8b5ce4
gsdx-debug: resolve alpha equation in the dump file
2015-06-24 19:42:53 +02:00
ee9b1caaa4
GSdx-hw: Custom res native mixup stuff, best fix this one too.
2015-06-23 19:43:04 +01:00
85c4184ea5
swap value functions for Round sprite hack.
2015-06-23 20:07:46 +05:30
ad71ca4cc8
GSdx-hw: Make sure custom resolution doesn't affect Native Resolution
2015-06-22 17:23:47 +01:00
7135867119
gsdx: very old typo on option name
...
Windows uses Renderer with an uppercase R
2015-06-20 16:18:10 +02:00
b44bccec6a
gsdx: fix previous commit with a scaling factor
2015-06-18 23:02:40 +02:00
5bc8f046b2
gsdx: fix snow engine issue in native resolution
2015-06-18 21:21:25 +02:00
4d1ca4bb76
Changes in title bar: DX -> D3D
...
Changed the name of the Direct3D renderers so they would match the way
they are named in GSdx's Plugin Settings window. Also changed a printf
to say OpenCL instead of opencl.
2015-06-18 13:00:29 -04:00
ab6f26ff4d
Merge pull request #606 from turtleli/gsdx-title-renderer
...
GSdx: Add renderer type to title bar
2015-06-18 09:49:26 +02:00
f5e8503fa5
GSdx: Didn't need to change this :P
2015-06-17 22:41:16 +01:00
c31c04d3db
GSdx: Fix CRC hacks not re-initialising after option change
2015-06-17 22:25:43 +01:00
0b5e0df35d
Epic fail Visual Studio!
2015-06-17 22:11:06 +01:00
fc24f039a8
GSdx: Add CRC Management to Windows Dialog.
...
- Clean up tooltip
- Remove Auto Skip Depth and Disable CRC checkboxes
2015-06-17 22:06:18 +01:00
e182251fbc
GSdx: Add renderer type to title bar
2015-06-17 21:59:05 +01:00
1d84af573d
ofc I didn't test previous commit ater the merge...
2015-06-17 21:55:37 +02:00
b2f8fe3593
gsdx: drop the auto skip depth hack
...
Just use 1 in skip draw if you want to use it
openGL code will soon be fixed to support depth correctly (and I hope dx in the future)
Conflicts:
plugins/GSdx/GSState.cpp
plugins/GSdx/GSState.h
2015-06-17 21:53:08 +02:00
263583ebcc
Revert "gsdx-ogl: enable again geometry shader on Mesa"
...
This partially reverts commit e774fecb77#605
2015-06-16 18:33:22 +02:00
c1d39a5f57
gsdx-ogl: drop UserHacks_DateGL4
...
Initial goal was to avoid slowdown in buggy driver
2015-06-16 09:57:45 +02:00
62beb3aaf4
gsdx: don't do bad stuff if aggressive hack isn't enabled
2015-06-14 10:27:02 +02:00
f765a195e2
gsdx: Don't set CRC function pointer when disabled
...
Less costly than an extra check for each draw calls
2015-06-14 10:27:02 +02:00
1699289162
gsdx: move 4 hacks from level2 to level3
...
remains tons of them :(
2015-06-14 10:27:02 +02:00
1be8d07f85
gsdx: auto CRC management
...
Old way various check boxes to configure the plugin
New way an unified drop down list
* Level 0 (dev only) => disable (mostly) all hacks and auto skip depth.
* Level 1 (dev only ) => enable oi/oo/cu hacks, others remains disabled
* Level 2 (GL) => enable most hacks except a couple of one that were fixed on openGL (speed impact)
* Level 3 (DX) => enable all hacks
* Level 4 => enable also aggresive CRC
Note: windows gui must be updated, and it will be nice to create a global tooltip
2015-06-14 10:27:02 +02:00
c6220bf836
gsdx-debug: print an error on unsupported draw call
...
Typically GTA
2015-06-14 10:27:02 +02:00
c11ac928ba
Merge pull request #599 from ssakash/patch-12
...
inclusion of jap version of dr2 in gscrc.cpp
2015-06-11 09:45:41 +02:00
237ffcf796
gsdx-ogl: Make GL_ARB_draw_buffers_blend optinal for limited DX10 drivers
2015-06-10 22:55:27 +02:00
343ecca6ba
crc hack
2015-06-10 20:13:27 +05:30
cbcb7962ce
Merge pull request #593 from turtleli/gsdx-cleanup-and-fixes
...
Gsdx cleanup and fixes
2015-06-10 08:14:44 +02:00
b1acc08c58
GSdx: Linux: Fix wording
2015-06-09 19:30:16 +01:00
4e82073bfc
gsdx-ogl: improve setting bilinear of palette
...
Instead to disable it, uses GS settings
2015-06-09 09:53:50 +02:00
4e7e7f2dd5
Nocturne, DDS1 and DDS2 CRC hacks to remove motion blur and smudge filter
...
Signed-off-by: i30817 <i30817@gmail.com>
2015-06-09 00:25:33 +02:00
2503d9698c
gsdx-ogl: re enable bilinear fitlering on palette for paltex mode
...
However keep it disabled for StarOcean 3 use cases
2015-06-08 21:01:18 +02:00
95c2622b7f
Gsdx: Typo'd!
2015-06-07 18:31:51 +01:00
b5171dfe5d
Gsdx: De-crapify Native resolution, potential fix for custom resolutions.
2015-06-07 16:57:55 +01:00
0946958acf
Gsdx: Height change on Gregory's recommendation :)
2015-06-07 16:12:14 +01:00
c3c29945b2
gsdx-ogl: only set a cst blend factor when Ad is used
...
Fix GT4 and potentially FFX
2015-06-07 16:10:59 +02:00
5daf7aa98f
gsdx-debug: keep s_n/pop in sync
2015-06-07 12:39:48 +02:00
5bf5b5bca4
gsdx-ogl: extend StretchRect to write in depth texture
...
It will allow to convert color texture to depth texture
2015-06-07 12:39:23 +02:00
0518aaedc9
gsdx-ogl: unattach palette to avoid noise in debug
2015-06-07 12:39:15 +02:00
23f8203a22
gsdx-ogl: add some shaders to convert depth <-> color
...
I'm afraid of rounding error
2015-06-07 12:39:00 +02:00
a5fe8478ae
Merge pull request #575 from PCSX2/gsdx-half-screen-snow-engine-v2
...
gsdx-texture-cache: Improve fix for snow engine game
2015-06-07 10:18:56 +02:00
0a467291f9
Gsdx: Height thing didn't work so well, using old buffer width test again
2015-06-07 03:50:34 +01:00
0e3349f953
Merge pull request #590 from PCSX2/OpenGL-printf-corrections-removed-shadow-hearts-crc
...
OpenGL printf wording corrections, removed Shadow Hearts CRC
2015-06-06 21:56:07 +02:00
1de58349c5
Bleh
2015-06-06 22:39:34 +03:00
8d61ab2af2
OpenGL printf wording corrections, removed Shadow Hearts CRC (not used anymore in GSstate)
...
Some minor grammar fixes to OpenGL prints and removed Shadow Hearts CRC
which has been left behind
2015-06-06 22:28:59 +03:00
1fa13163e4
GSDX: Fix for games which change height but keep the same buffer width
...
- Fix for games that specify a double height, like Pool Paradise
2015-06-06 20:24:10 +01:00
97467f9e30
Merge pull request #579 from PCSX2/drop-vs2010-support
...
Drop vs2010 support
2015-06-06 10:47:16 +02:00
68e44fd354
gsdx: reload the state when GSconfigure is called
...
It fixes the reloading of openGL option and it avoids
issue during pause/resume.
Fix issue #584
2015-06-06 08:51:53 +02:00
7e662c50d4
Revert "gsdx: always restore the full gs state object (s_gs)"
...
This reverts commit 2ea049b5a5
2015-06-06 00:22:15 +02:00
4feeaac7d1
Merge branch 'alignment' of git://github.com/xsacha/pcsx2 into xsacha-alignment
...
Gregory: Get all changes but keep C11 code path which will be the future
(if someone can find info on Visual Studio support)
* Keep the old posix api to use address sanitizer on gcc 4.9
Conflicts:
common/build/Utilities/utilities.vcxproj.filters
common/build/Utilities/utilities_vs2012.vcxproj.filters
common/build/Utilities/utilities_vs2013.vcxproj.filters
common/include/Utilities/MemcpyFast.h
common/include/Utilities/StringHelpers.h
common/src/Utilities/AlignedMalloc.cpp
common/src/Utilities/vssprintf.cpp
plugins/GSdx/stdafx.cpp
2015-06-05 20:31:14 +02:00
e774fecb77
gsdx-ogl: enable again geometry shader on Mesa
...
Please use a recent Mesa version (10.5 if possible)
2015-06-05 18:59:10 +02:00
6c8f7a0147
Merge pull request #580 from PCSX2/issue-565-option
...
gsdx: always restore the full gs state object (s_gs)
2015-06-05 17:51:02 +02:00
7d124e6a83
gsdx-texture-cache: Improve fix for snow engine game
...
Instead to hardcode the half-buffer size to 0x140, the new code
compute it.
To avoid regression, I limit the code to big target (>= 1024 pixels)
2015-06-05 09:06:12 +02:00
65b83a36a7
GSDX: Removed some printf's I left in.
2015-06-05 00:13:21 +01:00
91f775f3f0
GSDX: Fixed up some of the scaling height settings
...
-Last commit broke Snowblind games again
-Width now based on output circuit
-Try to use the smallest possible while being at least the size of the screen
2015-06-05 00:12:15 +01:00
6f4ec98bc3
gsdx: try to reduce the size of target as much as possible
...
I suspect too consume too much memory (issue #576 )
2015-06-04 22:15:52 +02:00
f8f6117ea9
gsdx-debug: allow to track texture move
...
Very painful for the cache and the performance
2015-06-04 22:10:04 +02:00
979ea92754
gsdx: make png++ optional
...
Some distributions (Fedora) doesn't have a png++ package...
2015-06-04 20:22:05 +02:00
bd2c04a0ec
ooups bad copy/past
2015-06-04 19:58:58 +02:00
2ea049b5a5
gsdx: always restore the full gs state object (s_gs)
...
It will force a reload of opengl option
2015-06-04 18:29:31 +02:00
c2e851b3a5
gsdx-ogl: don't use slow SW blend for nothing
...
When A == B, coeff is 0 so <= 1
When C == 2, just check the value of coeff
Barely faster in accurate_blend = 2
2015-06-04 18:18:47 +02:00
ba5b367ae8
drop support of Visual Studio 2010
...
* Severals PR uses C++11 features
* 2015 will soon be released
* Win 10 will soon be released
Time to upgrade
2015-06-04 08:55:22 +02:00
85266abd71
gsdx-ogl: use a 8MB vbo/ibo
...
Dirge of Cerberus draw 143,360 vertices in a single draw!
It is likely to emulate a particle effects
Hopefully improve issue #573
2015-06-04 08:28:40 +02:00
e34477a497
Merge pull request #547 from pgert/master
...
GSdx > HW-hacks > Rewording comments on duplicate CRC's and minor cleanup
2015-06-03 15:58:28 +03:00
0d5d94f56e
Merge pull request #570 from ssakash/patch-3
...
Three new Opengl settings for Windows [GUI]
2015-06-03 14:01:39 +02:00
3dd3bf6e2b
gsdx-ogl: new hidden option accurate_blend = 2
...
Debug option to emulate all blending draw call in the shader
Of course it is slow but it is very accurate
2015-06-03 09:56:07 +02:00
cd6c93cd9e
gsdx: silly mistake
2015-06-03 09:31:52 +02:00
f2d193edcf
Add three new Opengl options.
2015-06-02 16:02:56 +05:30
995ae51bf4
gsdx-ogl: disable a log message
...
Too verbose and code was fixed anyway
2015-06-02 09:28:35 +02:00
9fe13f7a6b
gsdx linux: fix a memory leak
...
Not important but pollute the valgrind log
2015-06-02 09:28:35 +02:00
4914620178
GSDX: Fix for 6x Native, fixed GH3 in native mode taking up quarter of the screen after the snowblind changes
2015-06-01 19:04:39 +01:00
2cbde89084
Merge pull request #555 from PCSX2/real-fb-format
...
GSdx: better framebuffer format
2015-06-01 11:48:07 +02:00
f81cf360bc
Merge pull request #545 from PCSX2/gsdx-half-screen-snow-engine
...
Gsdx half screen (most of) snow engine games
2015-06-01 11:47:40 +02:00
9fa473a57d
gsdx-ogl: glDebugMessageCallback is optional
...
Not even used in release build
2015-05-31 17:55:34 +02:00
9d69ff1f91
gsdx-debug: create the savef option
...
The idea is to easily extract bad frame from gs dump and to compare them
with the sw renderer.
Here the summary of the options:
savet => dump all input textures
save => dump the render target
savez => dump the depth buffer
savef => dump the frame
2015-05-31 17:38:52 +02:00
d301848848
gsdx-ogl: fix paltex on opengl
...
RT uses as palette must use the alpha channel
Palette texture uses the red channel
2015-05-30 19:01:09 +02:00
2f2ae2bc89
gsdx-ogl: enable gl tracing on windows
...
Trace info is enabled in dbg/dev build for the opengl renderer
Info is stored in GSdx_opengl_debug.txt when debug_opengl option is 1
2015-05-30 09:58:47 +02:00
009dd103ae
gsdx-ogl: protect the trace with if statement
...
And mark the function as optional
2015-05-30 09:58:46 +02:00
a639634769
gsdx-ogl: actually code use 4.0 GL_ARB_draw_buffers_blend
...
It is used for glBlendEquationSeparateiARB && gl_BlendFuncSeparateiARB
The 3.0 function could work too. It just need to be added
2015-05-30 09:58:46 +02:00
92d68b70d3
gsdx-ogl: add a performance note for later
...
The idea will be to replace StretchRect for standard case with a framebuffer
blit. Potentially it toggles less gl state.
Worth a test on Star Ocean 3 that uses a lots this function for stencil emulation
2015-05-30 09:58:46 +02:00
01e4a5148d
gsdx-ogl: avoid crash in debug/dev build
...
Don't be silly, don't put gl trace in EE thread.
2015-05-29 16:50:27 +02:00
0cb6c37f14
gsdx-tc: add an explanation of the magic number 0x140
2015-05-29 12:27:05 +02:00
97b237712c
gsdx: detect RT size based on fb size and gs output configuration
...
* It is required for snowbling games
* Targets of Texture cache are dropped.
2015-05-29 12:26:44 +02:00
02274601b3
gsdx-ogl: always copy texture into 0,0
2015-05-29 12:18:54 +02:00
e5326d1bd2
gsdx-tc: allow to reuse the right part of large RT as source
2015-05-29 12:18:54 +02:00
7ac533a4d1
gsdx-tc: invalidate half-RT src
...
snow engines uses the RT as 2 half RT.
2015-05-29 12:18:54 +02:00
da0b77e09b
gsdx-ogl: new logo
...
Thanks bmate for the logo.
Close issue #192
2015-05-29 11:05:52 +02:00
8f54da5fd3
GSDX: Removal of Nvidia hack.
...
- Hack no longer required as an option as a safe and simple workaround has been discovered which seems to work without modifying any vertices.
2015-05-28 21:41:02 +01:00
5d00c00826
GSDX: Fixed UserHacks_AutoSkipDrawDepth dialog creation on windows.
...
- CheckDlgButton was just wrong
- Changed tag to say "Auto-skip depth" as you could only see "Auto-skip draw" which was highly ambiguous on GSDX!
2015-05-28 21:21:19 +01:00
31ffdd8c53
Merge pull request #559 from ssakash/patch-5
...
Auto depth skip hack initialization.[GUI]
2015-05-28 19:21:45 +02:00
8e32d71c07
Merge branch 'patch-3' of git://github.com/ssakash/pcsx2 into ssakash-patch-3
2015-05-28 18:30:49 +02:00
5f7e09268c
change "D3D Internal Resolution" to "Internal Resolution"
2015-05-28 16:33:16 +05:30
bf743fec17
add logo for Opengl renderer.
2015-05-28 01:34:51 +05:30
c43ddaec4f
gsdx: add Castlevania hack explanation
2015-05-26 17:03:13 +02:00
419dfe0544
glsl: redo color/alpha management correction
...
Please test it!
GS supports 3 formats for the output:
32 bits: normal case
=> no change
24 bits: like 32 bits but without alpha channel
=> mask alpha channel (ie don't write it anymore)
=> Always uses 1.0f as blending coefficient
16 bits: RGB5A1, emulated by a 32 bits openGL texture. I think it will be more correct to use
a real 16 bits GL texture. Unfortunately it would cost several (slow) target conversions.
Anyway as a current solution
=> apply a mask of 0xF8 on color when SW blending is used (improve Castlevania shadow)
unfortunately normal blending mode still uses the full range of colors!
This commit also corrects a couple of blending factor. 128/255 is equivalent to 1.0f in PS2, whereas GPU uses 1.0f. So the blending factor must be 255/128 instead of 2
Note: disable CRC hack and enable accurate_colclip to see Castlevania shadow ^^
(issue #380 ).
Note2: SW renderer is darker on Castlevania. I don't know why maybe linked to the 16 bits format poorly emulated
2015-05-26 16:49:43 +02:00
ef3247c233
Update copyright license
2015-05-26 19:15:30 +05:30
99f9407c24
Auto depth skip hack initialization.
2015-05-26 19:13:56 +05:30
9ee3a173d0
gsdx-ogl: use a local ALPHA register
...
It would allow to easy tune the parameter to support 24 bits format
2015-05-26 15:36:48 +02:00
d31bd97d59
gsdx-ogl: add a variable to select FB output
...
Either 32bits/24bits/16bits
2015-05-26 14:59:07 +02:00
93c0d5a268
gsdx-ogl: add an error message when a RT is reused with a format cast
...
For example a 32 bits RT could be used as a 16 bits RT.
It is likely the source of various bug in HW renderer
2015-05-26 11:16:49 +02:00
a3bbe68d56
gsdx: throw an exception when we miss a mandatory gl feature
...
Gracefully quits when driver is not supported
(like nvidia legacy driver for GTX260)
Please test the impact on windows
2015-05-26 11:03:59 +02:00
3be5a6036b
gsdx-ogl: remove assertion + debug message
...
opengl use a different object to compute the vertex count
2015-05-26 11:03:59 +02:00
b84a462798
Unreachable code message was annoying me.
2015-05-26 00:30:12 +01:00
2704a65f57
gsdx: add some info for Star Ocean3/Valkyrie Profile 2/Radiata Stories
...
Feel free to test those games with CRC disabled on the openGL renderer (native resolution)
2015-05-25 12:37:48 +02:00
580d177951
gsdx: improve commit 11708486d8
...
This time linear filtering is disabled only for the bad draw call
(RT used as a palette texture).
2015-05-25 09:46:51 +02:00
99d7434671
gsdx-ogl: disable SSO on nouveau
2015-05-24 19:24:10 +02:00
11708486d8
gsdx: allow to control the filtering of texture cache
...
When the RT is used as an input texture, we need to rescale it.
Previous behavior was to always uses a linear filtering (more smooth).
Unfortunately it broke some games that expected an exact value like Star Ocean 3
This commit will disable the linear filtering in normal filtering mode (filter = 0
or filter = 2)
This way, shadow of Star Ocean 3 will appear correctly in upscaling (not
100% perfect but can't do better)
Note: SO3 only requires a nearest sampling of the alpha channel but
I don't know the behavior for others games.
2015-05-24 18:59:27 +02:00
b0af54d33e
gsdx-ogl: better support of palette
...
The purpose of the code is to support alpha channel
of RT uses as an index for a palette texure.
I'm afraid that code will likely break pure palette texture. Only used
if paltex is enabled
It fixes missing shadow in Star Ocean 3 (issue #374 ) in Native resolution
with filter = 0 (no filtering) or = 2 (normal fitering)
Rendering explanation:
The game emulates a stencil buffer with the alpha channel
The alpha channel of the RT can contains a palette texture index (format 4HH)
The idea is to have a gradient of value in the palette (16/32/48/...).
This way you can implement a +16/-16 and even wrap the alpha value every time
you hit the pixel.
Bilinear filtering breaks the rendering because it interpolates between counts
so you doesn't have the exact count
Upscaling breaks the rendering because the RT is reused as an input texture. It means
that we need to scale it down which again create some interpolations.
2015-05-24 18:07:16 +02:00
951a1fed94
gsdx-hack: enable auto skip of depth texture for God of War
...
Rendering is quite complex to emulate on the GPU due to several limitation.
Until we find a solution let's enable the old solution
You could find a description of the rendering here:
http://forums.pcsx2.net/Thread-God-of-War-Red-line-rendering-explained
2015-05-24 13:43:36 +02:00
a70c3bf5de
glsl: correct the alternate implementation of ps_main1
...
Still not yet enabled by default
Potentially it can be optimized with the dot product but special care
need to be taken to ensure float accuracy.
Bonus: it could work on old GPU (aka DX9)
2015-05-24 13:43:36 +02:00
c82fd94c6c
gsdx-debug: use GL_INS instead of printf
2015-05-24 13:43:36 +02:00
c01686d252
gsdx-png: add a fixme message for 16 bits by channel image
2015-05-24 12:51:20 +02:00
7f614401a6
gsdx-ogl: set accurate_blend as default
...
Rendering is better and I think speed impact remains small.
2015-05-23 15:10:04 +02:00
c507e816c2
gsdx-ogl: oups forget a break
2015-05-23 13:06:23 +02:00
b884e0c0c0
gsdx-debug: improve debug experience
...
* Dump context before the increase of s_n
=> aligned with the global call number
* Don't print colclip not supported when it is optimized away
* dettach the input texture when it is useless
=> avoid to show a wrong texture in the debugger
2015-05-23 12:23:05 +02:00
f665180d11
gsdx-debug: use hex number for texture pointer
...
Easier to grep
2015-05-23 12:20:26 +02:00
7609fdc576
gsdx: rename too much sr to sRect
2015-05-21 09:48:15 +02:00
b52ee6f1f6
gsdx-linux-gui: add an option for accurate color clipping
...
Note: it is only for debug purpose
Sotc testcase 187 fps => 125 fps (2x scaling)
2015-05-20 09:42:22 +02:00
183af4ece6
gsdx-ogl: don't enable SW blending when there is no blending
...
Mostly to avoid useless message
2015-05-20 09:36:01 +02:00
3d35e4f8ec
gsdx-ogl: implement all blends mode in shader
...
+ 250 lines !!!
2015-05-20 09:11:36 +02:00
2d54d59add
gsdx-ogl: update assertion ps sel is 8B now
2015-05-20 08:40:08 +02:00
d3d5a436ea
gsdx-ogl: add code to read back depth texture
2015-05-20 08:07:40 +02:00
a4c74ef872
gsdx-ogl: disable GL_DITHER
...
I really don't know the impact but it is not supported with integer texture.
2015-05-20 08:05:27 +02:00
8d3e3e6c5b
gsdx-ogl: more blend rework to support accurate_colclip
...
So far few blending equations are implemented in PS. It is only
for test the behavior on GoW
2015-05-20 08:00:40 +02:00
c5341a2711
gsdx-ogl: update blending management
...
This way it will allow to implement all blendings operartion in FS.
Of course it will be slow, but it would be nice for debug and quickly check
game error rendering.
2015-05-20 00:12:52 +02:00
358e0d445b
gsdx-ogl: add a shader to convert depth texture into uint
2015-05-19 18:56:32 +02:00
ac38ebbf29
Merge pull request #546 from ssakash/patch-3
...
enables Anisotropic filtering option for OGL (HW mode) [Windows UI]
2015-05-19 15:20:12 +02:00
ec45090358
glsl: implement an alternative of convert 1 shader
...
Code not yet enabled. Quick test show no heavy regression but I need
to carefully validate it.
2015-05-19 13:14:18 +02:00
a12acc0d24
gsdx-ogl: clean a bit Texture Cache OGL
...
Add a placeholder for depth format but nothing done yet.
2015-05-19 13:14:18 +02:00
1837001e75
gsdx: extend CopyOffscreen with a new shader parameter
...
Currently we're trying to infer the conversion shader based on the output format
It only works if the input data is RGBA8. It might not be true in the future
2015-05-19 13:14:18 +02:00
9554b5dd56
gsdx-lzma: drop CONCAT flag
...
I have some issue with it. Unlikely to use multi-stream gs anyway
2015-05-19 13:14:18 +02:00
fa761a129d
gsdx-linux: add an option to enable/disable recording
...
Avoid to kill the computer/application if the user press F12 by accident
2015-05-19 13:14:18 +02:00
34202933da
GSdx-linux-recorder: add various option to control it
2015-05-18 19:57:21 +02:00
388f46b577
gsdx-png: use array interface instead of set_pixel
...
Doc says it is "non-checking equivalent of set_pixel". Still slow as ass
At least syntax is nicer
2015-05-18 17:25:14 +02:00
a4d6722b26
gsdx-thread: add a CAPACITY parameter to GSJobQueue
2015-05-18 17:08:18 +02:00
e7665ee7dd
gsdx-linux-recorder: upgrade code to use n threads
...
Unfortunately it requires too much memory (easily 6GB)
2015-05-18 16:56:44 +02:00
cff168e002
gsdx-linux-recorder: implement multithread to save the image
...
Currently only a dedicated thread. It is still too slow!
2015-05-18 16:56:44 +02:00
012f1b4f05
gsdx-thread: remove deprecated boost code
2015-05-18 16:55:49 +02:00
19d9349b0b
gsdx-debug: remove old assert
2015-05-18 16:45:38 +02:00
c9508298b4
Update GSCrc.cpp
2015-05-18 16:37:28 +02:00
70b8772bb4
enables Anisotropic filtering option for Opengl (Hardware mode) [Windows UI]
2015-05-18 19:16:22 +05:30
503459798a
gsdx-linux: add a basic implementation to record the gameplay as png file
...
The idea was to merge them later with ffmpeg or other external tool
It kinds of work but current fps is around 2 !!! So not really usable
The speed issue is related to PNG.
So either the code to store pixels data must be optimized. Or maybe it misses some MT loves :)
2015-05-18 11:56:20 +02:00
2783da4a22
gsdx-ogl: use a local buffer to store offscreen texture
...
It will allow to read texture in // (and potentially could be useful
for recording)
2015-05-18 11:29:04 +02:00
79a9254894
gsdx-ogl: print some error messages if extenal shader is wrongly configured
2015-05-18 10:56:32 +02:00
540717b295
gsdx-ogl: don't force logz only on debug build
2015-05-18 07:24:26 +02:00
5c046180a1
cmake: properly add detection of lzma
...
Code is 100% optional.
Code will allow be enabled if lzma-dev is installed at compile time
2015-05-17 22:08:10 +02:00
98dde32dc0
gsdx-replayer-linux: use new code to allow loading of .gs.xz dump
...
A bit slower at startup but it saves a lots of disk space!
Reduce the size of my gs collection of 11GB :)
2015-05-17 22:08:10 +02:00
e93f780268
gsdx-replayer-linux: separate a bit parsing and executing code
...
It would ease the porting of the code to read xz file
2015-05-17 22:08:10 +02:00
86e3c18c33
gsdx-linux: add code to read xz file
...
Linux only to avoid the extra dependency on windows
2015-05-17 22:08:10 +02:00
5cfb496700
gsdx-ogl: only open debug file once
2015-05-17 14:43:56 +02:00
7979dec5b0
gsdx-ogl: optimize colclip 0
...
Currently colclip uses 2 passes to wrap the output of blending unit
However some blending mode are only a plain copy (of 0 or Cs or Cd).
So no overflow of [0:255], no need to wrap it
Note: I saw those cases in GoW.
2015-05-17 13:05:08 +02:00
6ced837360
gsdx-debug: add some PERF info in trace
...
The idea is to detect easily effect that are known to be slow on opengl
2015-05-17 13:05:08 +02:00
818412ba26
gsdx-debug: fix a crash in trace
2015-05-17 13:05:08 +02:00
b1ea081fc3
gsdx-debug: improve tracing interface
...
Basically move the format and c_str() in the macro
2015-05-17 13:05:08 +02:00
b8aa5f8f80
gsdx-debug: more trace for the texture cache
2015-05-17 13:05:08 +02:00
8a73849531
gsdx-ogl: enable multithread driver by default for nvidia
...
+ add a linux gui option to disable it (for test purpose)
2015-05-16 15:22:20 +02:00
c567198967
gsdx-ogl: replaced draw_count by s_n
...
This way error message is aligned with everything else :)
It is not perfect (normally it must be done in start of main draw)
2015-05-16 13:59:13 +02:00
62e0e6a067
gsdx: remove deprecated code
...
Core was fixed to call GSFifo in the good thread
2015-05-16 13:52:16 +02:00
2165c68938
oups forget a couple of break
2015-05-16 13:26:55 +02:00
02b478dfbc
gsdx: plug the new PNG wrapper
...
Drop various duplicated code :)
2015-05-16 12:47:28 +02:00
8cd533304c
gsdx: new dependency on linux => png++
...
Note: it is only header file that wrap the standard png (which was
already mandatory for wx/sdl)
2015-05-16 12:47:28 +02:00
cab59587e8
gsdx: add a PNG wrapper
...
Normally it supports all formats but I didn't have luck with 16 bits depth gray
2015-05-16 12:32:05 +02:00
3f278382a1
gsdx-debug: dump all drawing register
...
Thanks PERL
2015-05-16 11:16:33 +02:00
8341055f3e
gsdx-ogl: don't enable ogl_texture_storage on catalyst
2015-05-16 00:31:25 +02:00
a2d605be0b
gsdx: copy past mistake
...
Let's always increment the s_n counter
2015-05-16 00:31:25 +02:00
cfddcb7a93
gsdx-ogl: typo
2015-05-16 00:31:25 +02:00
0f01ba4c46
gsdx-ogl: mega boost
...
Enable Nvidia multi thread driver optimization
Enable ogl_texture_storage by default (requires for the speed boost
, later the option will be removed)
2015-05-16 00:31:25 +02:00
a1bfb237e6
Partially Revert "gsdx-ogl: drop support of GL_ARB_clear_texture extension"
...
This reverts commit 03e72781aa
2015-05-16 00:31:25 +02:00
28bb64aae8
gsdx: sed/dr/dRect/
2015-05-15 20:49:32 +02:00
445c28fe97
gsdx: sed/sr/sRect/
2015-05-15 20:47:14 +02:00
d566bb2a23
gsdx: sed /st/sTex/
2015-05-15 20:45:31 +02:00
6a9e425308
gsdx: sed /dt/dTex/
2015-05-15 20:44:15 +02:00
d870188d21
gsdx: sed/o/off/
2015-05-15 20:40:09 +02:00
27d485a940
drop a file that was wrongly commited
2015-05-15 20:34:09 +02:00
6166c95325
gsdx-ogl: protect PBO with fence
...
Safer and doesn't impact perf too much.
2015-05-15 18:32:47 +02:00
a5e424512c
gsdx-ogl: really avoid consecutive clean
2015-05-15 16:00:46 +02:00
84c3592fbe
gsdx-debug: more debug message/group
2015-05-15 16:00:45 +02:00
08291aed0c
gsdx-ogl: color state impact the clean command
2015-05-15 15:25:45 +02:00
613e215c73
gsdx-ogl: add some note for the persistent buffer + add a flush
...
Persistent is slower (at least on my gs dump) because data is put
in host instead of the video memory
I don't understand why upload the data directly to the video memory
is faster
2015-05-15 15:25:45 +02:00
5628bfb20c
gsdx-ogl: drop old code
...
I have group so it doesn't pollute anymore gl trace
2015-05-15 15:25:45 +02:00
6d8695127f
gsdx-recorder: use recursive mutex
2015-05-14 11:56:07 +02:00
bd96a73580
gsdx-debug: trace texture cache hit/miss/removal
...
Actually only a small part but I think it is enough to help debugging
tc issue.
Only enable it on debug because it is quite verbose
2015-05-13 09:01:04 +02:00
5e9a3a424e
Merge pull request #479 from PCSX2/gsdx-texture-cache
...
gsdx: value was wrongly overwritten
2015-05-13 08:08:46 +02:00
b7a9465963
gsdx-ogl: update the device to use the new texture flags
...
Hopefully it will increase a bit the speed
2015-05-12 18:18:20 +02:00
3e784d57e8
gsdx-ogl: add some flags to trace texture state
...
goal1: avoid 2 consecutives clean of the render target
goal2: only invalidate texture correctly
2015-05-12 18:03:06 +02:00
2e34d48e97
gsdx-ogl: add a virtual GetID method for texture
...
Much more readable
2015-05-12 17:41:41 +02:00
e0012811ae
gsdx-debug: more debug info in gl trace
2015-05-12 12:36:34 +02:00
4e222f18cd
gsdx-ogl: it was a bad idea to use DSA on fb
...
Actually I'm not sure we can mix both dsa/standard approach
2015-05-11 18:04:16 +02:00
f37f3cb3cf
gsdx-ogl: improve texture uploading
...
Initially we copy pitch by line in the PBO and tell the dma to only
use the first valid byte.
Now, we only copy useful data to the PBO. It reduce the copy and PBO memory requirement.
It seems a bit faster on native resolution
2015-05-11 16:32:13 +02:00
4e2e9aa56c
gsdx-ogl: always read the first attachment of the fbo
2015-05-11 16:28:34 +02:00
cb6e8a7d6a
gsdx-linux: Don't enable EGL by default
...
I was hoping that EGL become a standard much more faster. Currently it is an useless dep
so let's disable it by default.
2015-05-11 15:33:40 +02:00
643b1647c4
gsdx-gui-linux: add some tooltips for the hw options
2015-05-11 14:12:41 +02:00
921fa3bab8
gsdx-ogl/linux: drop fba option
...
It is useless as DX11
2015-05-11 13:57:26 +02:00
f0de7d6386
gsdx-debug: add 2 extra frames in GS dump
...
Initially I was afraid of the size increase but it can be
higly compressed.
Sometimes image was computed inside a RT but never outputed to
the screen which remains black. It is annoying to see the glitches
2015-05-11 13:45:24 +02:00
b3d8981a22
gsdx: link replayer to png to avoid link failure
2015-05-11 13:24:40 +02:00
eff4ac3e4a
gsdx-ogl: update UBO hint
...
On Nvidia, DYNAMIC is a bit faster.
2015-05-11 12:35:41 +02:00
59f7e4d2dc
Revert "gsdx linux: drop aligned stack option"
...
This reverts commit 2dcffe7fa4
2015-05-11 12:15:38 +02:00
2dcffe7fa4
gsdx linux: drop aligned stack option
...
I think the bug was related to a wrong declaration of exported function without stdcall
2015-05-11 11:35:34 +02:00
286fe4db8c
cmake/gsdx: check png++ is installed to support png image
...
Otherwise fallback to bmp file
2015-05-11 11:32:13 +02:00
30e3956ea7
gsdx-ogl: avoid issue with apitrace
...
The tool doesn't support NaN value so be sure the buffer is correctly initialized
2015-05-11 11:19:18 +02:00
1523b9534f
gsdx-debug: compact the code
2015-05-11 11:19:00 +02:00
51ed3e63e9
glsl: oups forget to remove a line
2015-05-10 10:39:23 +02:00
5565544ba6
gsdx-ogl: DATE with texture barrier
...
Much faster for small batch that write the alpha value. Code can
be enabled with accurate_date option.
Here a summary of all DATE possibilities:
1/ no overlap of primitive
=> texture barrier (pro no setup of stencil and single draw)
2/ alpha written
=> small batch => texture barrier (primitive by primitive). Done in N-primitive draw calls.
(based on GL_ARB_texture_barrier)
=> bigger batch => compute the first good primitive, slow but only 2 draw calls.
(based on GL_ARB_shader_image_load_store)
=> Otherwise there is the UserHacks_AlphaStencil but it is a hack!
3/ alpha written
=> full setup of stencil ( 2 draw calls)
2015-05-09 19:54:01 +02:00
390811f414
gsdx-debug: Dump in PNG on linux & dbg/dev build
...
Keep BMP for standard user of release build
2015-05-09 18:41:17 +02:00
3c7a3a3d83
gsdx-ogl: disable accurate option if driver doesn't support it
2015-05-09 18:41:17 +02:00
7fac25edb0
glsl: add shader implementation of impossible blend
...
Issue: I don't know if destination alpha value must be multiplied by 2.0f
2015-05-09 15:02:34 +02:00
f029e4763f
gsdx-ogl: add the alpha value in a constant buffer
2015-05-09 15:02:34 +02:00
472608b879
gsdx-ogl: add accurate blending implementation
2015-05-09 15:02:13 +02:00
1e8aea033c
gsdx-ogl: add a wrapper to control the drawing of primitives
...
No barrier => draw all primitives
Barrier but without overlap => draw all primitives
Barrier with overlap => draw primitive by primitve
It will ease the implementation of accurate blending and why not date too
2015-05-09 15:01:39 +02:00
625d65d4b4
gsdx-ogl: encode the bogus id as shader parameter
2015-05-09 14:55:44 +02:00
bc5de8df6b
gsdx-ogl: disable FF blend when blend is done in shader
2015-05-08 20:28:50 +02:00
380e420cdd
gsdx-ogl: add a blend parameter to shader
2015-05-08 20:28:50 +02:00
9023f5f0db
glsl: drop useless ifndef
...
I often mix them with the real value...
.
2015-05-08 19:28:17 +02:00
8e1db43431
gsdx-debug: debug stuff
2015-05-08 19:28:17 +02:00
3c66da4d82
gsdx: remove old code
2015-05-08 19:28:16 +02:00
1addae1993
gsdx-ogl: don't use extra shader for sprite hack
...
Atst == 2 && sprite_hack is equivalent to Atst == 1
It frees a bit in the shader selector, and reduces shader combinations.
2015-05-08 19:28:16 +02:00
b490085214
gsdx-ogl: add 2 options in the GUI to ease testing
...
accurate_date => use an emulated stencil to compute destination alpha
test (could be slow)
accurate_blend => do nothing (future)
2015-05-08 19:28:16 +02:00
4c91bab00e
gsdx: fix compilation error on release build
2015-05-08 19:28:00 +02:00
6d31124d3a
gsdx-debug: only enabled advance gl debugging on linux
...
It will avoid some crash on windows for driver that doesn't support
the extension.
Make debug support mandatory for debug build on linux.
2015-05-08 09:54:34 +02:00
e87d129b09
gsdx-ogl: more verbose debug
2015-05-08 01:01:01 +02:00
d6448183d7
gsdx-ogl-debug: insert error message in GL stream
...
This way, you can see your message in the GL debugger
2015-05-08 00:16:31 +02:00
544a923e32
gsdx: Add an option to control auto skip of depth texture
...
Default is 1 if the user enable hack.
It fixes GTA sun effect and likely others bugs.
Please someone add a windows GUI option.
2015-05-07 23:54:22 +02:00
51a67029cf
gsdx-ogl: add an option to print gl error messages
2015-05-07 23:54:22 +02:00
7518b2ef21
gsdx-gui-linux: add debug option in the gui
...
* Only for debug/dev build
* look awful (expand/fill) but otherwise it is nice for the debug ;)
2015-05-07 23:54:22 +02:00
d20501739f
Merge pull request #528 from ssakash/patch-1
...
sync with GSdx.ini variable.(fix earlier typo)
2015-05-07 22:15:41 +02:00
fda746ff93
gsdx-gui-linux: support 3 states hack options
...
Based on a Combo Box on linux. As good as 3 states check buttons
2015-05-07 22:13:49 +02:00
d69ffa9b8b
gsdx-gui-linux: move remaining table filling into small functions
2015-05-07 22:13:49 +02:00
b39b9c9f55
gsdx-gui-linux: use callback everywhere
...
Note: texture offset doesn't work nicely (you need to press enter
to validate the change)
2015-05-07 22:13:49 +02:00
d428e0d19d
gsdx-gui-linux: move table filling into separate function
...
It is much easier to read this way. I need to use callback for the remaining
object before I can move everything out of main function.
2015-05-07 22:13:49 +02:00
917a6c28e5
gsdx-gui-linux: factorize code
...
* Use wrapper and callback for Check Button/Spin Button/Combo Box
* Use TheApp.m_gs vector to create combo box
Remove nearly 100 lines of code ^^
2015-05-07 22:13:49 +02:00
ba21879059
gsdx-ogl: 1x aniso <=> off
2015-05-07 22:13:49 +02:00
e6560f348e
gsdx: add vector option for linux & openGL
2015-05-07 22:13:49 +02:00
8f1d00292b
gsdx-ogl: allow to control vsync on Windows
...
Issue #529
Completely untested
2015-05-07 18:41:10 +02:00
6095f40baf
gsdx-ogl: add the number of free bit in selector structs
2015-05-07 18:41:10 +02:00
9a083d5506
gsdx: crc hacks: few new crcs, few crcs region changes
...
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
2015-05-07 15:57:50 +03:00
97fad356b8
gsdx-ogl: fix debug build for AMD/Intel HW
2015-05-06 19:09:13 +02:00
cc4713d379
gsdx-debug: extend ogl debug capabilities
...
Group opengl calls into a nice name.
Apitrace shows them in a tree format that support folding. Previously it
was a long flat list (10K-40K of lines by frame)
I align the call number with the internal s_n variable. This way it is
easy to map GSdx dump output with the GL debugger :)
2015-05-06 19:09:13 +02:00
530e4ce776
gsdx-ogl: drop hack that rescale primitive (to avoid upscale glitch)
...
Rendering is bad. It renders sprites at native resolution.
2015-05-06 19:09:13 +02:00
6d65867b26
gsdx-ogl: comment point_sampler
...
It is not enabled on the shader so I will reuse the bit
2015-05-06 19:09:12 +02:00
3fcac07120
gsdx-ogl: print some message when blending is not properly supported
2015-05-06 19:09:12 +02:00
6fca3b421d
gsdx-debug: dump register context in a .txt file
...
+ Realign s_n number if frame is skipped
This way it is easier to understand current draw. It also eases
comparaison between SW/HW.
2015-05-06 19:09:12 +02:00
24e37d2dea
sync with GSdx.ini variable.(fix earlier typo)
...
fixed the description for round offset hack.
fixed the new description for round offset hack.
2015-05-05 23:01:46 +05:30
5d4bc5c8fe
Merge pull request #516 from PCSX2-underground/master
...
round offset UI initialization
2015-05-05 17:48:53 +02:00
5f5b901bca
gsdx-ogl: alpha bending equation/function are constant
...
Drop useless variables/state checking
2015-05-05 11:20:25 +02:00
8032e2c369
gsdx-ogl: separate color mask state from the blending state
...
Unlike DX they're uncorrelated.
2015-05-05 10:26:01 +02:00
302ce51efe
round offset UI explanation
...
initialization of IDC_ROUND_SPRITE
set&get config for round offset.
three state checkbox for the hack.
define IDC for round offset.
Linux (GUI) refresh.
typo
2015-05-05 00:29:00 +05:30
7bfee7e377
gsdx-debug: stop the dump after a limited number of draw call
...
Otherwise it fills your disk in a short time with useless data.
2015-05-03 16:46:48 +02:00
c1ddad2d25
gsdx-linux: Refresh the GUI
...
* Use table everywhere (better alignment)
* Factorize Box/Frame creation
* Factorize table insertion
* Add Anisotropic Filtering support
2015-05-03 16:36:48 +02:00
ae70344fbc
gsdx-ogl: fix 2 passes DATE with GL42 (override_GL_ARB_shader_image_load_store = 1)
...
It fixes shadows issue with Persona 3
2015-05-02 16:56:18 +02:00
14a1925de0
gsdx ogl: date texture is signed to use i variant
2015-05-02 16:53:34 +02:00
Gregory Hainaut