implemented new efb to ram in opengl
modified TextureConversionShader preparing the implementation of new efb to ram in dx11
please test for regressions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5874 8ced0084-cf51-0410-be5f-012b33b47a6e
Also two little changes which don't affect functionality or performance:
Change an IUnknown* cast to a T* cast.
Improve some error messages.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5870 8ced0084-cf51-0410-be5f-012b33b47a6e
Move bits of HAVE_OPENCL/HAVE_WX for OS X from SConstruct to header files.
Use /usr/lib/libz on OS X now that we no longer have -L/opt/local/lib in
the library path. It is still possible that we could pick up a libz in
/usr/local/lib that would make the application non-redistributable, but
the danger is much less than previously.
Also bits of minor portability cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5868 8ced0084-cf51-0410-be5f-012b33b47a6e
are properly declared at thread entry/exit. I am leaving the ones in
Wiiuse while there's still a small hope that it may be used outside of
Dolphin, though.
Move the fixed MAP_32BIT definition for OS X to Common.h.
UDPNunchuk.cpp was deleted, so update the scons build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5864 8ced0084-cf51-0410-be5f-012b33b47a6e
fix frame dumping and screenshots in d3d9 and opengl
some improvements to the new efb to ram
please test to see if the issues introduced by the new efb to ram are solved by this commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5862 8ced0084-cf51-0410-be5f-012b33b47a6e
identifying which options and parameters go with which platforms etc.
OS X, like Windows, now no longer uses Config.h. Configure() is still
used for the wx-config parameters, but that is a temporary measure.
Globals.cpp has never been used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5860 8ced0084-cf51-0410-be5f-012b33b47a6e
Put the filename back into the "Saving settings ..." notice log (soren don't remove this again.)
Added a "batch" mode command line option. Now dolphin will not exit with the emulator if a file is run from the command line unless you also use the "batch" option. For example in linux "dolphin-emu -b -e filename".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5859 8ced0084-cf51-0410-be5f-012b33b47a6e
This "run once" behavior is more in line with expectations of a command
line invocation and matches what the nowx build does.
Personally, this makes the main build do everything the nowx build does
and more.
However, if you feel that the main build still doesn't have feature parity
with nowx, please say so now, so we can fix it and kill off nowx.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5855 8ced0084-cf51-0410-be5f-012b33b47a6e
using it as a constant in several places. Saves a few bytes and the time
it takes to recompile a bunch of files whenever svnversion twitches.
Using the SVN version string as an integer is not portable as the Unix
svnversion always includes e.g. the "M" suffix for a modified tree.
Windows people, please check my change to Plugin_VideoDX9/Src/main.cpp
as I don't really understand how _T() and the %hs format string work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5852 8ced0084-cf51-0410-be5f-012b33b47a6e
normally (on a fresh install) be triggered by the user clicking on
the GUI.
This notably includes refreshing the game list. The progress dialog
used in the course of updating the game list relies on wxWidgets
being able to yield to its event handler which isn't started until
after OnInit.
In fact, we might want to consider just moving all the initialization
currently triggered by OnInit into AfterInit so that we can rely on
the event handler running there. This would mean that we don't have to
worry about whether those code paths are triggered by a user click or
run at init time. This will require some more testing, though.
For now just move automatic booting along as this requires the game
list initialization to be done.
We also could instead choose to special-case cases like updating the
game list and simply not use a progress dialog there if the event
handler isn't running, but this approach is clearly cleaner.
See thread at http://code.google.com/p/dolphin-emu/source/detail?r=5848 .
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5849 8ced0084-cf51-0410-be5f-012b33b47a6e
Some general code cleanup, and removed a PanicAlert (made it a NOTICE_LOG instead) so that only one panic alert is shown when attempting to load from dvd/cdrom drives, and none are shown when "Show Drives" is selected from the menu.
Also removed the hack introduced in revision 5564 that prevents the GameListCtrl from being properly updated when a game is loaded from the command line or via the autostart feature of the debugger.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5848 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fixed a segmentation fault caused by the UDP Wiimote stuff when a thread was not properly ended.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5847 8ced0084-cf51-0410-be5f-012b33b47a6e
replace efb to ram implementation by a hybrid approach.
explanation:
when copying from efb to texture, instead of make a copy to a texture or to the ram, copy the data to both, in hi quality to the texture and in native quality to the ram.
then instead of re-decoding the data from ram (very slow) use the data in the texture.
to improve this even more, test if the cpu has modified the data in the ram copy, if so, update the texture in memory and mark it as dynamic to avoid redundant work in future frames.
having all this implemented this is what is archived:
sms: full quality with scaled efb copies and fully functional goop cleaning :)
ztp: efb to texture speed with full map support.
nsmbw: this is a hard to emulate game, as it make a lot of shading and texture modification in cpu. it only have 35 fps in my system with new efb to ram but is 10 fps faster than normal efb to ram.
this game also show me another unimplemented feature, copy efb to multiple textures at the same time (is used to animate coins and other things in the world).
this is a remaining todo in efb to texture.
a lot of games should improve, so please test and let me know any regresion caused by this commit.
if everyone likes this the next step is, implement efb to multilpe textures and merge efb to ram and efb to texture.
then port to the other plugins.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5846 8ced0084-cf51-0410-be5f-012b33b47a6e
i made this changes trying to found the origin of the sps in zww and sms but no look so far.
the code is looking nice so commit it
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5845 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added JIT breakpoints functionality
* Added a menu option to disable the JIT block cache
* Enabled single stepping in JIT mode as a run-time option (automatically enabled when the debugger is used)
* Enabled the missing JIT Off menu options
* Removed the JIT Unlimited Cache hack
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5833 8ced0084-cf51-0410-be5f-012b33b47a6e
For everyone having black screens on Windows: Try switching off MSAA, it seems to be broken (at least for me)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5832 8ced0084-cf51-0410-be5f-012b33b47a6e
Update Issue 2508
This should take care about the black screen. Please open a new issue for other problems that may arise.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5830 8ced0084-cf51-0410-be5f-012b33b47a6e
as an accident of implementation. On other platforms, an explicit call
to wiiuse_connect is required.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5825 8ced0084-cf51-0410-be5f-012b33b47a6e
Treat external data (configuration file and device names) as 8-bit data.
Character set mapping is not ideal, but at least such names can be used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5824 8ced0084-cf51-0410-be5f-012b33b47a6e
return to the old values in constants in pixelshader, the old values give mi 3 or 4 fps more,(maybe some kind of compiler optimization) in some games and with the current algorithm i notice no difference with this values, please report any problem.
optimizes SSAA to make it a little faster and, the quality should be the same but with a little speedup.
change the way the frame is processed depending is xfb is enabled or not to make this a little faster.
please test and report any problem
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5820 8ced0084-cf51-0410-be5f-012b33b47a6e
Add some useful checking to J_CC/SetJumpTarget.
Refactor increment/decrement and reuse code with increase/decrease.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5816 8ced0084-cf51-0410-be5f-012b33b47a6e
1 - Optimize pixelshadergen to avoid redundant register overflow math, with this if a game don't need this will be not applied.
this must bring some fill rate back and improve speed a little in fill rate limited systems.
2- some corrections to vertexshadergen to avoid uninitialized texture coordinates, dono if is the correct way to fix it but t least it will make house of the dead overkill playable in dx11.
the bad thing: still missing geometri in dx9, in dx11 it works exactly as on opengl.
3 - some optimization made to improve fps a little wih the latests changes made to fifo.
* back to the original code in beginfield as now it will work right.
* check for efb access more often as a lot of time is lost waiting for efb access
4 - apply a little fix for missing textures in nvidia opengl tanks to Wagnard28 for finding that nvidia does not like invalid shader id :)
please test for any regression
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5812 8ced0084-cf51-0410-be5f-012b33b47a6e
If compilation fails, rebuild the whole solution as Visual Studio struggles with the not so complex project dependencies.
ATI users still need to install the Stream SDK as it's the only way to have an OpenCL driver.
NVidia users just have to install a recent driver (version 197 is tested and working).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5808 8ced0084-cf51-0410-be5f-012b33b47a6e
frameworks on OS X.
Try to be a little clearer about which configuration options apply
to which platform(s). Should pave the way slightly for win32 scons.
We have accidentally been using LUA_USE_LINUX on OS X all along.
Turns out that LUA_USE_MACOSX is for an ancient version of OS X and
LUA_USE_LINUX is a reasonable set of defaults for modern Unices, so
just keep using that.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5804 8ced0084-cf51-0410-be5f-012b33b47a6e
with OpenCL will also run on 10.5 without OpenCL.
Build with OpenCL by default now, but keep the opencl build option around
until Linux also links OpenCL weakly, at which point it can go away.
Start to merge in the actions required to make the OS X application bundle
redistributable into the main build and let bundle=true be concerned only
with the optional step of creating a dmg.
Some people are building binary snapshots for OS X without applying the
install_name_tool fixups and besides, osx_make_dmg.sh doesn't fully handle
the internal dependencies between the wx libraries, so we need to be rid
of any external dependencies by the time "scons bundle=false ." finishes.
Ideally we should just use static builds of the wx libraries, but the flat
namespace used by Objective-C for anything other than normally linked
dylibs (sadly not dlopen'ed dylibs) makes that difficult because both the
main binary and the plugins have wx linked in without any symbol ordering.
TBD: Either do automatic install_name_tool fixups for both the main binary
and the wx dylibs or find a workaround for the flat namespace problem.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5797 8ced0084-cf51-0410-be5f-012b33b47a6e
for portability.
(It is a bit unfortunate that some of the plugins have a Config.h of
their own, which can confuse this matter.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5795 8ced0084-cf51-0410-be5f-012b33b47a6e
few different variations that can be true depending on circumstances.
This would likely cover the _WIN32 case as well, but since I don't
pretend to fully understand just what is going on with wxWidgets
here, I can't really call this any less of a hack..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5794 8ced0084-cf51-0410-be5f-012b33b47a6e
meant as a ideally persistent device instance number.
In a dynamic environment such as when dealing with USB/bluetooth HID's,
I am not sure how much sense such an id can make and it would probably
be better to identify devices by an opaque blob (and a printable string).
In any case, the OS X HID manager does not offer the illusion of a
persistent integer instance identifier.
A string in the form of the device's own name is not sufficient as on
e.g. my Macbook Pro, there are three HID devices all bearing the name
"Apple Internal Keyboard / Trackpad".
For now, hijack the ControllerInterface id to mean the the HID usage
page number. This at least separates keyboards and pointing devices,
allowing the keyboard to be selected in the configuration dialog.
Also some minor cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5793 8ced0084-cf51-0410-be5f-012b33b47a6e
leaking memory. This is necessary because the wxgl code called from
those threads relies on deferred release.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5792 8ced0084-cf51-0410-be5f-012b33b47a6e
Wiimotes are now slighty more responsive and multiple wiimotes should harmonize now slighty better. This clean up was requested/inevitable and should have be done way more earlier. This "might" break osx/linux builds, so please test. If your aware of any "real wiimote" issues please post it in the comments as well(dont forget to state your OS).
Known wiimote issues:
1.) Possible wiimote disconnect on pressing the home button
2.) 1-2 Possible wiimote disconnects directly after starting a game
3.) Rumble causes lag. I don't think this is a wiimote plugin issue itself, I'm not sure tho. It would be interesting to know whether the lag still happens on emulated wiimotes as well, when the game tries to rumble.
4.) Connecting(pairing up and refreshing) a 2nd/3rd/4th real wiimote while having a game running/paused, might swap player slots and cause disconnects at that moment.
If u have more issues, feel free to post them, to have them all here collected once more to get a brief overview.
Apart from that, increase the wiimote read timeout @settings(20-200). If your expecting frequent disconnects, restart dolphin, and don't open the wiimote gui before playing instead directly start games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5788 8ced0084-cf51-0410-be5f-012b33b47a6e
Dual Core sync fix.
When the FIFO is processing data we must not advance the cpu cycles in CoreTiming because in this way the VI will be desynchronized. So, We are waiting until the FIFO finish and while we process only the events required by the FIFO.
This should fix Issue 2072 .
This affect to all games in dual core mode.
Please, You can test all games with VPS limiter auto, 60, 50 depending of the game and compare with prev revision.
For example now NSMB in the video Intro has 60 fps (prev 30 fps) :D or SMG does't need anymore FPS Limitter Hack to get 55-60 fps
Beside the slowdowns now are more softly and the fps more stables because the VI sync is almost perfect.
The Core Timing and Fifo modifications are delicated. Please report if this hang any game. Don't forget check with prev revision.
Enjoy it! Thanks to Rodolfo for teach me all about dolphin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5777 8ced0084-cf51-0410-be5f-012b33b47a6e
From now on if you create a GUI option specific to a particular build, do not gray it out. Instead do as I have done here and make it not present on those builds. It may add a few precompiler conditionals that developers have to look at, but that is considerably better than a completely useless option that the end user has to look at.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5774 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the decoder codepath when OpenCL is enabled and the DX11 plugin is used.
Added the DX11 plugin to the Dolphin project dependencies.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5764 8ced0084-cf51-0410-be5f-012b33b47a6e
Cleanups, documentation, ...
Theoretically enable anisotropic filtering if selected in the config, not sure if it works though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5761 8ced0084-cf51-0410-be5f-012b33b47a6e
I don't know if issue 2792 is a valid issue for dolphin. I think that is a bug in the X server implementation on those distributions of those affected. I can not replicate it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5758 8ced0084-cf51-0410-be5f-012b33b47a6e
Make font rendering a lot prettier.
Fix constant buffers in EmuGfxState::ApplyState() to really have a size which is a multiple of 16 instead of 65536.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5755 8ced0084-cf51-0410-be5f-012b33b47a6e
minor code changes and adding comments.
And issue fix 2792 with credits to Karloathian for finding and fixing it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5750 8ced0084-cf51-0410-be5f-012b33b47a6e
Remove superfluous _WIN32 checks in DX11 and DX9. Meant to port that code over to Linux or what? :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5738 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix all remaining window resizing issues.
Implement screenshot functionality (doesn't seem to work completely, yet).
Assign debug names to (hopefully) all remaining device objects.
Flush the GPU's command buffer in Close() to make the ReportLiveDeviceObjects output clearer.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5730 8ced0084-cf51-0410-be5f-012b33b47a6e
Advantages:
- easier to use
- drops our dependence on d3d10.lib, without depending on the June 2010 DX SDK
- makes finding unreleased buffers easier
- possibly more ;P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5728 8ced0084-cf51-0410-be5f-012b33b47a6e
Disable D3D10_SHADER_ENABLE_BACKWARDS_COMPATIBILITY when compiling pixel shaders in Debug configurations as well.
Properly support centered text drawing, even though it's not used, yet. Credits go to xsacha for this one.
Found an awesome hacky way to free the buffer memory used by ReplaceTexture2D. At least it gets freed at all now...
Various other tweaks to texture conversion.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5724 8ced0084-cf51-0410-be5f-012b33b47a6e
wiimotes, so that wiiuse_find has a chance to return early when that
number is found rather than wait for the 5 second timeout always.
Hide the auto-(re)connect UI elements on non-Windows so as not to
confuse users until that functionality is implemented generally.
Empty strings are not allowed in wxChoice lists.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5714 8ced0084-cf51-0410-be5f-012b33b47a6e
LZO/SFML/SOIL and subject to the same shared_foo exception options.
This makes building a self-contained distribution package much easier.
TBD: Cg and wxWidgets 2.9.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5712 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed screen clearing and simplify drawClearQuad a little
put some nice code from dx11 that i like in dx9.
modify plugin spec preparing for implementing efb poke (is not used often but is a missing functionality so..)
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5710 8ced0084-cf51-0410-be5f-012b33b47a6e
By now I'm pretty sure some games are written in multi-thread, and they depend on Watermark to suspend/resume their threads.
So without Watermark, they will never work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5709 8ced0084-cf51-0410-be5f-012b33b47a6e
the properties window so that a large ISO directory doesn't cause
the window to take up the full height of the display.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5700 8ced0084-cf51-0410-be5f-012b33b47a6e
Set default video mode format to DXGI_FORMAT_R8G8B8A8_UNORM. This might fix FRAPS recording, but also decrease FPS; test both, please.
Add numerous TODOs
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5695 8ced0084-cf51-0410-be5f-012b33b47a6e
Use 10.5 SDK header files in an attempt to keep us honest and
10.5 compatible. I'd do the same with system libraries, but
the linker gives strange errors when I try that. We also link
against third party libraries from Macports that haven't had
any magic 10.5 compat dust sprinkled over them, so maybe it
isn't very important anyway.
Move the OS X variable section in SConstruct upwards a bit to
have the settings apply to more of the config tests. SCons'
ParseConfig causes problems for the -arch tuples, though, so
the SDL check still isn't quite as comprehensive as it should
be.
Put the XCode project out of its misery.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5693 8ced0084-cf51-0410-be5f-012b33b47a6e
modify shader generator to produce native sm 4.0 code.
eliminate compatibility mode in dx11 so now all shader must work much better.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5691 8ced0084-cf51-0410-be5f-012b33b47a6e
I have no idea how all this stuff works, but this fixes at least some (if not all) games which worked before r5681.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5689 8ced0084-cf51-0410-be5f-012b33b47a6e
Improved dual core mode for "Metroid Prime 2", "Star Fox Adventures", etc.
I should have committed this long time ago, but I don't have every game to test compatibility... Any way, better late than never.
PS: If any regression observed, feel free to revert this rev.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5681 8ced0084-cf51-0410-be5f-012b33b47a6e
Might or might not work for you, yet.
Anyway, read the soon to be created forum thread on this plugin before asking any questions.
Huge thanks to rodolfoosvaldobogado for helping me out in various areas.
Also, thanks to everyone on IRC who supported me during development ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5680 8ced0084-cf51-0410-be5f-012b33b47a6e
In the future if we merge wiimote too, this will bring the advantage that the two will be able to cooperate, to no longer fight over control of input devices which can sometimes cause problems.
Thanks shuffle2 for the patience.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5670 8ced0084-cf51-0410-be5f-012b33b47a6e
I hope I didn't break the mac+linux builds - if i did, fixing it should be a simple matter of adjusting the sconscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5661 8ced0084-cf51-0410-be5f-012b33b47a6e
- be more strict with the input signature of generated pixel shaders
- replace the D3D parameter with an API_TYPE one, so that we can further distinguish between DX9 and DX11
- for what it's worth dx11 (using vs_4_0) doesn't support D3DCOLORtoUBYTE4; added a workaround for this
- add a "dx9-" prefix to the shader cache files to avoid conflicts with dx11 shaders
Apart from that we're calling CommandProcessor::Shutdown() in main.cpp,Shutdown() now.
Delete all files in User/ShaderCache if you want to save a few KB disk space :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5659 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix: fix for lighting equations , that must improve lighting in a lot of games ( test smg :) )
experimental speedup: implemented alpha pass using stencil buffer instead of a duplicate shader. i recommend to test this well as i dono if will work the same way in all the systems. i my system it gives a nice 2-5 fps improvement. if it brings problems in any system or game will revert asap.
enjoy
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5653 8ced0084-cf51-0410-be5f-012b33b47a6e
Ideally we should be more character set aware, but at the moment we
use anonymous 7/8-bit strings in too many places.
Fix use of AddGrowable{Col,Row}. Any (non-zero) rows/columns must
have been created first by adding an item to it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5648 8ced0084-cf51-0410-be5f-012b33b47a6e
the original author, in the About dialog. Ok'ed with him.
WX doesn't reflow text terribly well, so format it manually.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5646 8ced0084-cf51-0410-be5f-012b33b47a6e
Thanks soren for the macosx fixes, this fixes the windows build and eliminates some warning from the same.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5643 8ced0084-cf51-0410-be5f-012b33b47a6e
Patch from user gamepromcompany on the MacOSX_Build wiki page.
Add support for the Mac command key as a hotkey modifier in
WXKeyToString but present it as Control. WXKeyToString is used for
both hotkeys and menu accelerators, the latter only supporting
Shift/Alt/Control with wxWidgets.
wxSpinCtrl on wx 2.9 has a very small default size, so give the
window size ones a reasonable size.
Use wxFULLSCREEN_ALL when switching to fullscreen, which gets rid
of window decorations like the title bar. Note that to actually
be rid of it with wx 2.9 on OS X, you'll need this patch:
http://trac.wxwidgets.org/ticket/11701
Also remove a couple of files I had accidentally duplicated.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5642 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes a number of problems, including unreliable connection setup,
frequent disconnections, busy-waiting and shutdown deadlocks.
Motion Plus and nunchuk hot swapping now work and Wiiuse does a small
amount of queueing to prevent occasional dropped packets. The OS X
bluetooth stack has no internal input buffering and while a worker
thread can easily keep up with data coming from the Wiimote, the rest
of Dolphin can easily get behind if it is blocked by disk I/O or
similar. Mostly the Wiimote protocol recovers from dropped packets,
but sometimes the Wiimote would get out of sync and send a disconnect.
I wonder if the other platforms might benefit from a bit of queueing
at this layer as well.
Still doesn't support multiple devices, as I kept changing my mind
about how best to do it. I only have one Wiimote anyway..
One improvement to the Wiimote plugin that would be really nice would
be for the scan for new devices to operate continuously or periodically
like on a real Wii rather than just for 5 seconds at startup..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5640 8ced0084-cf51-0410-be5f-012b33b47a6e
efb scale :
auto fractional: the original scaling way, will grant a 1:1 pixel mapping between efb and screen giving the best image quality even in non standard resolutions
at the cost of glitches in some games.
auto integral: automatic but only int values for the scale, no glitches but only the correct pixel scaling when using some resolutions.
the rest are the fixed scales.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5639 8ced0084-cf51-0410-be5f-012b33b47a6e
enable newline normalization
get revision number via `hg svn info` for svnrev.h
ignore incremental/generated binary files (windows/VS at least)
leave a comment if some files need native eol set in svnprops
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5637 8ced0084-cf51-0410-be5f-012b33b47a6e
We really should integrate the nowx functionality into the main build,
removing nowx and HAVE_WX checks and turning USE_WX into a variable
that defaults to GUI use but can be overridden at the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5630 8ced0084-cf51-0410-be5f-012b33b47a6e
hotkey configuration working with wx 2.9, but it turned out to be
too tempting to use it to hack up OS X keyboard support using wx
key events in the "old" input plugins.
It was with some reluctance that I used PAD_Input (and copied it
for Wiimote as well) as that is clearly a deprecated interface,
but this way the hack is contained within the old plugins for when
the switchover to ControllerInterface happens.
The idea is to provide stable keyboard support on OS X for both
GCPad and Wiimote while we debug HID keyboard and real 'mote code.
It works pretty well, although the wx approach does impose a few
limitations like no arrow keys and left/right side modifier keys
are considered equivalent.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5622 8ced0084-cf51-0410-be5f-012b33b47a6e
just the basename like libPlugin_foo.dylib. Dolphin then loads the
plugins relative to the compiled-in plugins directory.
This means that you won't have to reselect the plugins when running
different builds (in different directories) and is most obviously
beneficial on OS X where application bundles are not (should not) be
expected to stay in the place where they are first installed.
This is tested on OS X and Linux with local/global build options, but
not Windows. I don't anticipate any problems on Windows, but that OS
does have slightly different semantics with regard to path component
separators and file suffixes, so it's something to watch out for.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5621 8ced0084-cf51-0410-be5f-012b33b47a6e
in general cleanup and bugfix disable pierre patch for the moment as it causes problem in some games and hopefully fix the remaining missing textures for nvidia users in opengl.
make the code in pixelshadergen looks nice and readable.
D3D: this is a ultra experimental commit please check for regressions or error.
make the efb Scale / super sampling level customizable to improve the output quality and let the user configure quality according to his hardware.
is everyone likes this change will translate it to opengl
please test
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5612 8ced0084-cf51-0410-be5f-012b33b47a6e
Have lint mean -Werror at least until the issue with
-Warray-bounds and -Wunused-result can be resolved.
Avoid producing empty object files:
CoreRecording.cpp is not configured through the build system,
so just give it a dummy symbol when it's not compiled in.
ChunkFile.cpp and DSPBreakpoints.cpp are no longer used.
ExtendedTrace.cpp is Windows-only.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5592 8ced0084-cf51-0410-be5f-012b33b47a6e
Not only does it change tons of files to switch to a new and non-working (it doesn't parse my ini files, at least) ini parser, it also reshuffles a lot of code and removes a plugin. The latter part is fine, but doing these two major switches in one revision, one of which is broken, is completely unacceptable. I said to merge tiny changes, not massive reworkings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5589 8ced0084-cf51-0410-be5f-012b33b47a6e
Details: Issue consisted of IR data overflowing extension data on IR report change e.g. mode 3 to 1, which happens for instance when changing data report mode from 0x33 to 0x37.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5588 8ced0084-cf51-0410-be5f-012b33b47a6e
CoreRecording.cpp is not configured through the build system,
so just give it a dummy symbol when it's not compiled in.
ChunkFile.cpp and DSPBreakpoints.cpp are no longer used.
ExtendedTrace.cpp is Windows-only.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5587 8ced0084-cf51-0410-be5f-012b33b47a6e
variables, writeable strings and dangerously shadowed variables.
index(), gamma(), exp() and y0() are POSIX functions and using those
names can cause namespace confusion.
A number of C files were missing the final newline required by ANSI C
and some versions of GCC are pedantic enough to complain about this.
These changes simply the scons build, allowing us to get rid of
filterWarnings which is simply more trouble than it's worth.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5574 8ced0084-cf51-0410-be5f-012b33b47a6e
Using Unix tools to operate on a tree containing filename with spaces in them
is really annoying, so rename the handful of instances where there were spaces.
Host.cpp has never been used.
Games tend to lookup the following directories that we don't yet have anything
to put in, so prepopulate them in Data/User/Wii:
title/00010001
title/00010002
title/00010003
title/00010004
title/00010005
title/00010006
title/00010007
meta
shared2/title
Set eol-style native on a number of text files which didn't already have it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5572 8ced0084-cf51-0410-be5f-012b33b47a6e
All visuals with parameter GLX_SAMPLE_BUFFERS_ARB = 0 have
GLX_SAMPLES_ARB = 0, so the old code would only ever choose
visuals with GLX_SAMPLE_BUFFERS_ARB>=1 and GLX_SAMPLES_ARB>=1.
Some drivers do not export any multisampling capable visuals,
so dolphin fails to find a matching visual and falls back to
the single buffered visual(which does not work for some yet
unknown reason). Fixes issue #2647.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5565 8ced0084-cf51-0410-be5f-012b33b47a6e
game list, rely on the main event handler already running, which isn't
the case until after OnInit(). This is a problem when an ISO directory
is already set at startup.
To deal with such actions that can only properly be done after the wx
environment is fully functional, schedule AfterInit() where the initial
game list scan is done.
The underlying icon object for wxIcon on OS X didn't work with our
(non-square?) 96x32 game list graphics, but we weren't using any wxIcon
properties such as transparency anyhow, so just skip the wxBitmap to
wxIcon back to wxBitmap conversions.
Use wxID_ABOUT and wxID_PREFERENCES so that those menu items are
automagically teleported to their canonincal locations on each platform.
USE_XPM_BITMAPS has been implicit on all platforms for some time now.
AddGrowableCol() causes problems in a couple of inessential places for
some unknown reason, even though the same pattern works fine elsewhere.
These changes make us play a lot nicer with wxWidgets 2.9.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5564 8ced0084-cf51-0410-be5f-012b33b47a6e
by not linking in other Unix audio modules.
Use kAudioUnitSubType_DefaultOutput instead of kAudioUnitSubType_HALOutput
so that a runtime switch to another audio device is automatically handled.
Use ERROR_LOG for audio errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5562 8ced0084-cf51-0410-be5f-012b33b47a6e
becomes blocked. This was most readily apparent when first starting
programs from a high-latency filesystem.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5558 8ced0084-cf51-0410-be5f-012b33b47a6e
of going through an intermediate thread and buffer. This seems to be
how Core Audio is meant to be used, although I still haven't read the
manual.
Indeed, sound on OS X works perfectly now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5555 8ced0084-cf51-0410-be5f-012b33b47a6e
initialization failure, so help it along a little by also considering
the CPU as an OpenCL device.
Use CL_DEVICE_TYPE_DEFAULT rather than CL_DEVICE_TYPE_ALL as that will
give preference to the spiffy GPU if one is present. Implementations
of OpenCL are likely to put a GPU as the first device in the list, but
there is no guarantee of this and this code currently only picks the
first device in the list.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5547 8ced0084-cf51-0410-be5f-012b33b47a6e
quantum, as the callback wants us to provide exactly the amount of
samples needed.
This is incomplete because core audio may ask for less than the full
buffer size (for me, typically 1484 or 1488 bytes of a 2048 byte
buffer). As a quick hack until I read the rather impenetrable core
audio documentation, assume that each callback request will want
about the same number of samples as the preceeding one.
This makes sound bearable.
Also various cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5543 8ced0084-cf51-0410-be5f-012b33b47a6e
* Restore Audio Throttle to function properly, broken by Ayuanx many hundreds of revisions back.
* Simplify DSPLLE JIT dispatcher in preparation for an asm rewrite
* Remove hack that made DSPLLE JIT seem faster than it was by running fewer cycles, but resulting in bad sound. This shows off how mysteriously slow it is - I don't understand why it's not faster. Use the DSPLLE interpreter for now if you want to use DSPLLE.
* Made "DSPLLE on Thread" work properly with correct-ish timing - although the speed benefit is really small now.
If it seems like this change slows anything non-LLE down, try turning off Audio Throttle and use the frame limiter in options instead.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5541 8ced0084-cf51-0410-be5f-012b33b47a6e
Removing and adding some elements, making it more readable for others.
Off-Topic: Have fun at the Grandprix! May the best win:P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5536 8ced0084-cf51-0410-be5f-012b33b47a6e
This is especially perceptible for "big" textures, so e.g. EFB copies to RAM should be a bit faster now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5531 8ced0084-cf51-0410-be5f-012b33b47a6e
and Wii/sys directories if they do not already exist. This conflicts with
DolphinApp::OnInit (run after constructors) which populates the User tree
only if there isn't already something there.
Instead, set up the two directories in the Data tree.
With this change, sys/uid.sys still won't be created until the _second_ run
after a fresh install, so these file initializations should be moved out of
constructors so that they will be run after OnInit().
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5526 8ced0084-cf51-0410-be5f-012b33b47a6e
use appropriate extensions extracting compressed wii discs
check for tmd+tik for each title and list titles correctly for sysmenu versions <=0xE0
this will allow viewing of installed channels but they will not launch until ES_Launch is emulated
so far I have not been able to determine why later sysmenu versions do not display channels correctly
switching between system menu versions is as simple as rightclicking a system menu wad in the gamelist and installing to wiimenu than restarting
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5524 8ced0084-cf51-0410-be5f-012b33b47a6e
Apparently, motionplus games are very strict on calibration data checksums, they don't like invalid/0x00'd checksums(this is trackable via 0x01 writes to the active extension register at 0xA400F3). I'll keep all motion plus related stuff that I've discovered on my blog: http://snzgoo.blogspot.com
Next time I'll fix the disconnects, which are most likely caused by the sent motionplus empty/dummy data.
So stage2 might come sooner than u guys thought. Let me hear u scream;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5522 8ced0084-cf51-0410-be5f-012b33b47a6e
* optimize may last commit to make it faster
* reorder the code to make it more readable
please test and enjoy
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5520 8ced0084-cf51-0410-be5f-012b33b47a6e
of the file save bug.
(_dbg_*() should really get the same treatment as *_LOG() to remove this
whole class of #ifdef hell.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5519 8ced0084-cf51-0410-be5f-012b33b47a6e
Just minor stuff that needs to be finished: Dummy motionplus data needs to be kept dynamic(just like wiimote accel data), or it might cause disconnects after some time. Furthermore, there are 1-2 remaining register writes that have to be understood and emulated.(e.g. 0x00F3/F4). In the end just minor stuff. I'll address that in my next commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5476 8ced0084-cf51-0410-be5f-012b33b47a6e
as a nice result of this eliminate the nasty glubuild2dmipmaps.
thanks to neobrain and orphis for discovering the error and the right values
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5475 8ced0084-cf51-0410-be5f-012b33b47a6e
this not solve the remaining projection problem in some games like mario kart wii
will work that problem later.
please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5473 8ced0084-cf51-0410-be5f-012b33b47a6e
This should give the exact same shader code except for the cases of
SELA == SELB and SELC == 1, the latter only for the color combinder.
In these two cases the results of the shader should not change in any way.
It would have been possible to optimize the SELC == HALF case too, if
the actual factor had been 0.5f instead of 0.4980392f.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5472 8ced0084-cf51-0410-be5f-012b33b47a6e
strcasecmp is provided by Source/Core/Common/Src/CommonFuncs.h
and vswprintf is overloaded in C++ to take the same parameters as
vsnwprintf, according to MSDN.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5470 8ced0084-cf51-0410-be5f-012b33b47a6e
almost fixed real xfb in d3d, i say almost because there are some minor scalling problems. hope will fix them soon.
implemented a more intelligent index generator to emulate more accurately the behavior of the gc.
please give me feedback on this changes.
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5465 8ced0084-cf51-0410-be5f-012b33b47a6e
The real hardware probably always sends the result of its computations
to the alpha test/fog units, in parallel to its registers, but those
only take the result of the last texenv stage.
This makes grass show up in ZTP, where the last texenv stage oddly writes to
reg #3 instead of #0.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5462 8ced0084-cf51-0410-be5f-012b33b47a6e
This removes some bad behaviour, like the audio thread busy waiting inside ALSA code,
missing begins of voice samples(due to DSP_HLE code not getting called often enough).
Turns out my understanding of ALSA API was lacking.
Tested with pulse plugin and directly on my intel-hda/realtek hardware.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5461 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented fixed efb scale to improve alignment and discard some error caused by incorrect scale.
make both plugins work similar. this must improve opengl image quality a lot.
also implemented dynamic resizing in opengl, this way the resolution math the windows resolution on resize.
this is highly experimental so please test a lot.
implemented shader dumping on error thinking in future experiments with shaders.
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5458 8ced0084-cf51-0410-be5f-012b33b47a6e
a MAYORRRRRR change in pixel shader generation, please review all games you can and leave comments this must improve accuracy in graphic emulation a lot.
for example: mario eyes in super mario galaxy, water pod transparency an water transparency on game intro in super mario sunshine, etc.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5457 8ced0084-cf51-0410-be5f-012b33b47a6e
disable install wii menu item after installation (restart required still for NANDContentLoader to find it
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5456 8ced0084-cf51-0410-be5f-012b33b47a6e
The error was caused by trying to set the text for a status bar field whose index was equal to the actual number of fields.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5449 8ced0084-cf51-0410-be5f-012b33b47a6e
allows (among other things) installing the wiimenu from a wad extracted from the update partition of a game
currently you can choose Tools > Install Wii Menu or right click wad from the gamelist and install
restart required to have the Tools > Load Wii Menu work
I thought I had already commit this, I guess I forgot and it's just been sitting on my hdd :p
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5448 8ced0084-cf51-0410-be5f-012b33b47a6e
The fix is asking alsa for a prefered "hardware" buffer size, so alsa does not fall
back to pulseaudios offering of ~1 minute. Additionally, alsa busy waits when pulseaudio
is used, sw:avail_min is set and hw:buffer_size is small.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5439 8ced0084-cf51-0410-be5f-012b33b47a6e
I also already implemented most of the needed data structures and datareport handling for the motionplus-nunchuk passthrough mode, which I'll add up next as well.
Wii Sports Resort is now bootable by just using an emulated wiimote (only working under the old wiimote plugin atm,
I asked billiard to port my commit into his plugin since he knows his plugin better than me and its less work for him than for me,
I kept most parts of my code in modules to simplify that task).
Upcoming stage2: Faking the motionplus on the fly on real wiimotes, that means you will be able to play, e.g. Redsteel2 with a real wiimote and nunchuk or wii sports resort with just your real wiimote.
and nunchuk, but w/o the need of having a real motionpluscontroller connected. The new Zelda 2010 will benefit by that, since it will require a motionplus controller.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5438 8ced0084-cf51-0410-be5f-012b33b47a6e
make native mips loading an option to prevent performance lost in game that not need this functionality.( thanks to dorian.fevrier for point the performance lost.)
added a patch from pierre@pirsoft.de to avoid vertex drops when index array is full in opengl implementation that do not support large index arrays
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5432 8ced0084-cf51-0410-be5f-012b33b47a6e
For some reason something in (or included in) Frame.h messes up the SFML inclusion in NetPlay.cpp.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5426 8ced0084-cf51-0410-be5f-012b33b47a6e
No need to press the "refresh wiimotes" button on pair up anymore, checking the extended pair up box(still experimental) allows u to pair and hook up the wiimote while being ingame. You still need to do the ALT+F5/F6/F7/F8 connect, but you wont need to press the pair up button + refresh button anymore, feel free to test it, its not perfect yes. Just press 1+2 on your Wiimote to pair it up ingame(you need to check the extended pair up box for that feature).
PS I hope I didnt break nonwin32 builds, I gave my best however.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5413 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a window size setting for windowed mode.
Also pulled some X11 specific code out into a separate file.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5395 8ced0084-cf51-0410-be5f-012b33b47a6e
add an option to limit fps instead of vps for games with bad synchronization
some minor fixes in d3d gui
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5394 8ced0084-cf51-0410-be5f-012b33b47a6e
void pushExtValueFromReg(u16 dreg, u16 sreg);
void popExtValueToReg();
instead of the backlog.
Someone might want to add it to the Unit test
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5389 8ced0084-cf51-0410-be5f-012b33b47a6e
simplified CoreTiming::AddEventToQueue
fixed emu.frameadvance and implemented emu.wait
fixed Lua script termination
brought over some luaconf customizations to fix issue 2245 in a better way and deal with certain other scripting problems
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5383 8ced0084-cf51-0410-be5f-012b33b47a6e
made Lua run on the CPU thread to fix unreliable script execution issues
several fixes so the Lua savestate functions can actually work
added Lua function savestate.verify to help with catching desyncs
implemented FailVerifyAtFrameBoundary in Lua interface
added a Clear button to the LuaWindow
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5382 8ced0084-cf51-0410-be5f-012b33b47a6e
Made the JIT sanity checks more informative.
Sanity checks are now only performed in the DEBUG and DEBUGFAST builds. This gives a tiny speed-up for everyone else.
Fixes issue 2187.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5378 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix an issue with the DX9 plugin not being the correct size when starting the game in fullscreen at a higher resolution than the desktop resolution.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5375 8ced0084-cf51-0410-be5f-012b33b47a6e
Also disabled some code in the same place that caused the application to hang in linux. This means that if you select keys from the key list you will have to click Set to make it take effect. At least until I can figure out how to get that working.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5368 8ced0084-cf51-0410-be5f-012b33b47a6e
Moved ControllerInterface to InputCommon. Moved GCPadNew GUI/Config code to a new project, InputPluginCommon. It is used by both GCPadNew and WiimoteNew. I hope that I included everyone's fixes to GCPadNew and ControllerInterface.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5355 8ced0084-cf51-0410-be5f-012b33b47a6e
Jordan Woyak