This adds a check to ImportTitleDone to make sure all required contents
that are listed in the TMD have been imported before allowing to finish
the import. Not checking for this could allow titles to be left in an
inconsistent state.
There seems to be a race condition between a peripheral device
connecting to the bluetooth controller and it being ready to use.
It's very short and it depends upon the controller, some appear to
connect synchronously and block until the device is ready, others
report the device upon discovery but do not allow communication straight
away. I don't know which is the correct behaviour, or whether it depends
on the peripheral, controller or both. Anyway, Dolphin waits for a
remote to appear and immediately attempts to open the communication
channels, this can fail because the device isn't ready yet, delay, try
again, and it works.
There are other (unlikely) chances the device is busy at random
moments after this initial race condition so it loops around try to
reconnect.
This was inspired by an earlier patch, see here:
https://bugs.dolphin-emu.org/issues/5997#note-20
I can confirm that it works perfectly for me on a bluetooth
controller where otherwise it's impossible to connect (Dell 380
Bluetooth 4.0).
So, a FifoRecorder instance is instantiated as a file-local variable and
used as a singleton (ugh). Most users likely don't regularly use the
FIFO player/FIFO recorder, so this is kind of a substantial waste of
memory.
FifoRecorder's internal RAM and ExRAM vectors are 33554432 and 67108864
bytes respectively, which is around 100.66MB in total.
Just on the game list view on a clean build with nothing loaded, this
knocks debug build memory usage down from ~232.4MB to ~137.5MB, and
release build memory usage down from ~101MB to ~5.7MB.
The GameCube IPL sounds the same when using the free ROM as it does when
using the official ROM (and in Audacity, I couldn't visually distinguish
between the waveforms). It has a reference to an unimplemented function
at 0x8644 which seems to only be used in an inlined version of the CARD
ucode.
This allows the user to go through the Wii Menu first boot setup
screen when they launch the System Menu for the first time.
Most useful on a clean profile, after doing a full system update,
to configure settings like the console country.
This rewrites the SysConf code for several reasons:
* Modernising the SysConf class. The naming was entirely cleaned up.
constexpr for constants.
* Exposing less stuff in the header.
* Probably less efficient parsing and writing logic, but much simpler
to understand and use in my opinion. No more hardcoded offsets.
No more duplicated code for the initial SYSCONF generation.
* More flexibility. It is now possible to add and remove entries,
since we rebuild the file. This allows us to stop spamming
"section not found" panic alerts; we can now use and insert
default entries.
On a real Wii, the title list is not in any particular order. However,
because of how the flash filesystem works, titles such as 1-2 are
*never* in the first position. We must keep this behaviour, or some
versions of the System Menu may break.
Will be used from several functions to verify the signatures for
different containers (TMDs, tickets, device signed blobs).
An option was added to disable signature checks, because that could be
useful for people trying to import unsigned stuff.
stat() returns an error code in errno on both POSIX compliant
platforms and Windows.
This means we should always use errno instead of GetLastErrorMsg
which uses GetLastError() (Win32) on Windows.
POSIX allows one or more trailing slashes for directories.
From POSIX.1-2008, section 3.271 (Base Definitions / Pathname):
> A pathname can optionally contain one or more trailing <slash>
> characters. Multiple successive <slash> characters are considered to
> be the same as one <slash>, except for the case of exactly two
> leading <slash> characters.
On Windows, the extra trailing slashes are ignored for directories too.
This makes it possible to catch errors earlier so that file systems
simply fail to load instead of behaving oddly. It also makes it possible
to check for errors that weren't checkable before, like the end of a
directory being after the end of the parent directory.
Instead of expecting callers to know how the size of directory file infos
relates to which files are in which directories, filesystems now offer a
GetRoot() method, and file infos offer a way to get their children. As
a bonus, m_FileInfoVector no longer has to be created and kept around
in RAM. Only the file info objects that actually are used are created.
Not initializing until the filesystem is used is good when
a filesystem is constructed and then never used, but nobody does that.
This simplifies the code a little and lets all methods be const.
Instead of using lots of small scattered reads to read the FST,
only one big read is used, which is more efficient.
This also means that the FST only allocates memory once and stores all
strings close to each other - good for the CPU cache. The file info
objects use pointers to this FST memory of containing data themselves.
Keeping around the big m_FileInfoVector containing objects with only
pointers is a bit unnecessary, but that will be fixed soon.
Instead of calling GetPathFromFSTOffset for every file info, FindFileInfo
now only looks at names in directories that are included in the path.
For the common case of searching for "opening.bnr", this means that
only root-level files and directories have to be searched through.
Some callers already have the file info, making the relatively slow
FindFileInfo calls unnecessary. Callers that didn't have the file info
will now need to call FindFileInfo on their own.
Some callers (i.e. ISOProperties) don't want the full path, so giving them
it is unnecessary. Those that do want it can use GetPathFromFSTOffset.
Not storing full paths everywhere also saves a small bit of RAM and is
necessary for a later commit. The code isn't especially pretty right now
(callers need to use FST offsets...) but it'll become better later.
GC/Wii filesystem internals shouldn't be exposed to other classes.
This change isn't especially useful by itself, but it opens up the
way for some neat stuff in the following commits.
Too much boilerplate that is duplicated if we use curl directly.
Let's add a simple wrapper class that hides the implementation details
and just allows to simply make HTTP requests and get responses.
Makes it slightly less likely to forget a check and end up doing an
out-of-bounds access. Also makes it obvious that we *are* indeed
checking whether the handle is valid, instead of hiding it in
HasOwnership (which won't handle the root key handle case properly).
This code hadn't been touched since 2010. Nowadays, the panic alert
setting is loaded by ConfigManager and applied in UICommon.
VideoConfig has no business messing with it.
I don't see why we need to call ShutdownWiiRoot on InitializeWiiRoot.
Also, atexit? Really? Not only is this unnecessary, it will also cause
ShutdownWiiRoot to be called twice in rapid succession for no reason.
The config must only be restored after the HW has shut down, not while
it is still running, because the HW can still query the config, which
can lead to inconsistent states.
This fixes WiiRoot not being able to copy back saves on shutdown.
This ioctlv is used to get an IOSC decrypt handle for a title.
It is known to be used internally by the WFS modules, but it can also
be used from the PPC under some conditions.
Brings us down to 2 essentially unimplementable ioctlvs (syscalls which
seem to return kernel thread priorities...), and 1 known but
unimplemented ioctlv (VerifySign).
In the future, NAND filesystem access will be limited to one IOS
instance, for safety reasons and to make it possible to consider
supporting NAND images. This means that any code accessing the NAND
filesystem must go through the FS device, both for code that is
external to IOS and internal.
Because we don't want to introduce any singleton, this requires
internal IOS code that needs NAND access to be part of an IOS device
class, so they can access the FS device easily.
Making some of the internal ES implementation functions member
functions also prevents them from being (mis)used outside of IOS,
since they cannot be called everywhere anymore.
OpenALStream was querying the backend for AL_EXT_float32 support (which
suceeds), but AL_FORMAT_STEREO_FLOAT32 was defined incorrectly.
Also changes OpenALStream to query for AL_EXT_MCFORMATS (multichannel
support) rather than hard-coding that it doesn't work on macOS.
They have been broken since 2 years and no one has noticed,
which shows that no one really cares.
And it's arguable whether showing the CPU info is really useful.
I don't see any reason to disable loading the IPL if bHLE_BS2 is
disabled. bHLE_BS2 should only cause us not to run the IPL, but not
skip loading it in the first place. More importantly, without always
loading it, this causes issues when trying to launch only the GC IPL
while having bHLE_BS2 = false.
They're essentially the same. To achieve this, this commit unifies
DolReader and ElfReader into a common interface for boot executable
readers, so the only remaining difference between ELF and DOL is
how which volume is inserted.
* Move out boot parameters to a separate struct, which is not part
of SConfig/ConfigManager because there is no reason for it to
be there.
* Move out file name parsing and constructing the appropriate params
from paths to a separate function that does that, and only that.
* For every different boot type we support, add a proper struct with
only the required parameters, with descriptive names and use
std::variant to only store what we need.
* Clean up the bHLE_BS2 stuff which made no sense sometimes. Now
instead of using bHLE_BS2 for two different things, both for storing
the user config setting and as a runtime boot parameter,
we simply replace the Disc boot params with BootParameters::IPL.
* Const correctness so it's clear what can or cannot update the config.
* Drop unused parameters and unneeded checks.
* Make a few checks a lot more concise. (Looking at you, extension
checks for disc images.)
* Remove a mildly terrible workaround where we needed to pass an empty
string in order to boot the GC IPL without any game inserted.
(Not required anymore thanks to std::variant and std::optional.)
The motivation for this are multiple: cleaning up and being able to add
support for booting an installed NAND title. Without this change, it'd
be pretty much impossible to implement that.
Also, using std::visit with std::variant makes the compiler do
additional type checks: now we're guaranteed that the boot code will
handle all boot types and no invalid boot type will be possible.
I didn't know better back then, but the boot type is only supposed to
be used for the actual boot params. It shouldn't be used or changed
after booting.
You may want to read the PR #2047 comments before reading this.
Dolphin attempts to support an unencrypted type of Wii discs
that apparently is identified by a 4-byte integer at 0x60
being non-zero. I don't know what discs (if any) would be
using that format, so I haven't been able to test Dolphin's
support for it, but it has probably been broken for a while.
The old implementation is very short but also strange.
In CreateVolumeFromFilename, we read a 4-byte integer from
0x60, and if it's non-zero, we create a CVolumeGC object
instead of a CVolumeWiiCrypted object. This might seem like
it makes no sense, but it presumably worked in the past
because IsVolumeWiiDisc used to check the volume type by
reading the magic word for Wii straight from the disc,
meaning that CVolumeGC objects representing unencrypted Wii
discs would be treated as Wii discs by pretty much all of
Dolphin's code except for the volume implementation code.
(It wasn't possible to simply use CVolumeWiiCrypted, because
that class only handled encrypted discs, like the name says.)
However, that stopped working as intended because of ace0607.
And furthermore, bb93336 made it even more broken by making
parts of Dolphin expect that data read from Wii discs needed
to be decrypted (rather than the volume implementation
implicitly deciding whether to decrypt when Read was called).
Disclaimer: Like I said before, I haven't been able to test
any of this because I don't have any discs that use this
unencrypted Wii disc format, so this is all theoretical.
Later, PR #2047 tried to remove Dolphin's support for
the unencrypted Wii disc format because seemingly no
discs used it, but the PR got closed without being merged.
At the end of that PR, I said that I would make a new PR
with a better implementation for the format after PR #2353
was merged. Now that PR #2353 is merged (two years later...)
and PR #5521 is merged, the new implementation was easy to
make, and here it is!
Untested.
Normal users don't care about it. In fact, people care so
little about it that the Wii implementation of it was broken
starting from when it was implemented (eb65601) to 7 years
later (e0a47c1), apparently without anyone reporting it.
- coef: Explicitly set 23 different values that are used by GBA UCode,
and tweaked overall parameters to more closely match those 23 values.
- irom: Moved a few functions to their proper places, updated BootUCode
to configure DMA transfers using AX registers as well as IX registers
(the GBA UCode uses this to do two sequential transfers in one call),
and added partial functions used by GBA UCode.
All functions were reverse-engineered solely based off of observed
effects on the virtual machine: register states before-and-after, dmem
interactions, and DMA transfers. The specific coefficients were observed
being read from dmem, and must be exactly those values to function
properly. I have no knowledge of how the official ROM implements these
functions, or how it is implemented overall.
Tested with The Legend of Zelda: Four Swords Adventures, Final Fantasy
Crystal Chronicles, and Billy Hatcher and the Giant Egg (to download
ChuChu Rocket!).
`P_REG1C` had the same value as `P_ACCL`, so was causing spurious errors
when used with ACCM registers. Gcdsptool (which calls this `P_ACCLM`)
gives it the value `P_REG | 0x1c10` instead, and handles errors in the
same block as other REG## enums.
This makes the interface slightly cleaner and a bit more consistent
with the other getters. Still not fully the same, since the others
don't really handle failures with std::optional; but at least the
value is returned by value now, as opposed to having the function
take a pointer to a u64.
This gets rid of some assumptions that non-DiscIO code was making about
volume types. It's better to encapsulate as many of the volume type
differences as possible in DiscIO.
Made possible by PR #2353.
This is more reliable, as this guarantees subsystems will be
shut down in the same order they were initialised (if they were
initialised). It also allows us to stop keeping track of what needs to
be shut down manually and just return in case of errors.
This should prevent the emulator from getting totally stuck when
the boot process does fail.
This makes it hard to support different boot params for different boot
types. We should not be making the assumption that Dolphin will
always be booting directly from a file (and in particular, only
using a string).
It's incompatible with future changes that will allow Dolphin to boot
a NAND title properly from well, the NAND, as opposed to booting from
WADs. (And no, treating the title TMD as a "bootable" path doesn't
count. Especially when that approach won't work with NAND images
or IOS LLE.)
And it's confusing to expose this functionality from the UI. It's
pretty bad for UX to change the play button's behaviour depending on
whether the user has launched something before, configured a default
file to boot, added a directory to their game paths.
This commit moves the write function to where it should be (IOS),
especially when ES::ImportTicket() is the only place to use it.
Prevents misusing the ticket import function, and removes one unsafe
direct write to the NAND that does not go through IOS.
This also fixes the destination path: the session root is the one which
should be used for determining the ticket path, not the configured one.
The whole NANDContentLoader stuff is truly awful and will be removed
as soon as possible.
For now, this fixes a bug that was exposed by std::optional::operator*.
std::optional makes a few things a bit neater and less error prone.
However, we still cannot use C++17 (unfortunately), so this commit
adds an implementation of std::optional that we can use right now.
Based on https://github.com/tensorflow/tensorflow/blob/master/tensorflow/core/lib/gtl/optional.h
which seems to be fairly similar to C++17's <optional> and standards
compliant. It's one of the few implementations that handle propagating
type traits like copy constructibility, just like libc++/libstdc++.
`MainWindow` initializes a number of input interfaces but never shuts
them down. This was causing a crash-after-exit on macOS where the
ControllerInterface backend stores a `std::thread` object in a static
variable and only stops it when ControllerInterface::Shutdown is called.
FormLayout is not intended for this sort of dialog:
> QFormLayout is a convenience layout class that lays out its children
> in a two-column form. The left column consists of labels and the right
> column consists of "field" widgets (line editors, spin boxes, etc.).
pSysMem is of the type const void* -- because of this, it makes the
original delete[] call undefined behavior, as deleting a void pointer is
undefined behavior.
Also punning types into existence, like what was done for the stereo
image header is undefined behavior as well. The proper way to do this is
to either manually add all individual bytes manually, or memcpy the
struct into memory.
As we want to deallocate the memory before returning, and because
pSysMem is a const void*, we keep a unique_ptr to the data and just pass
pSysMem a raw pointer to the data.
Use @Orphis's FindFFmpeg module from ppsspp:
2149d3db7f
From that commit:
> This new module should be able to handle both libraries in the regular
> paths and fallback to pkg-config.
> It is also able to find dynamic libraries, not just static libraries.
> It will generate imported targets with the name FFmpeg::<lib> that you
> can use in your scripts.
gcc complains that the printf %x formatting instruction expects an
'unsigned int' but we pass a 'size_t'. We add the 'z' length formatting
specifier used for 'size_t'
This adds the WARNPC directive from xkas/asar to complement the existing ORG
directive. A common useful idiom is "WARNPC 0xXXXX\nORG 0xXXXX," which only
seeks forward and raises an error if you've already written to that part
of the file.
Fixes https://bugs.dolphin-emu.org/issues/10265 (Star Wars: The Clone
Wars hangs on loading screen with DSP-HLE and JIT Recompiler).
The Clone Wars hangs upon initial boot if this interrupt happens too
quickly after submitting a command list. When played in DSP-LLE, the
interrupt lags by about 160,000 cycles, though any value greater than or
equal to 814 will work. In other games, the lag can be as small as 50,000
cycles (in Metroid Prime) and as large as 718,092 cycles (in Tales of
Symphonia!).
All credit to @hthh, who put in a heroic(!) amount of detective work and
discovered that The Clone Wars tracks a "AXCommandListCycles" variable
which matches the aforementioned 160,000 cycles. It's initialized to ~2500
cycles for a minimal, empty command list, so that should be a safe number
for pretty much anything a game does (*crosses fingers*).
These settings are already loaded and saved to the SYSCONF. The INI
load/saves are redundant and do not work anyway because they are
overwritten by SYSCONF.
This file is pretty small now that it doesn't handle Wii
partitions anymore, so let's move its contents to Volume.cpp.
This is also more consistent with how blob creation works.
This happened to work without any problems because the only way for a
file system to be invalid was to not have the right GC/Wii magic word
in the unencrypted area, and a volume could not be created without
having the right GC/Wii magic word there. Now that file systems read
the magic word from a partition instead, a fix is needed.
I replaced m_OffsetShift with m_Wii in bb93336 to support
the decrypt parameter for read functions. Doing that is no
longer necessary, so m_offset_shift is now used like before.
By removing mutable state in VolumeWiiCrypted, this change makes
partition-related code simpler. It also gets rid of other ugly things,
like ISOProperties's "over 9000" loop that creates a list of
partitions by trying possible combinations, and DiscScrubber's
volume swapping that recreates the entire volume when it needs to
change partition.
- Makes DSP-LLE code checksums the same as those from DSP-HLE. I'm
assuming DSP-HLE was doing it correctly, since there are numerous
references to these pre-endian-swapped checksums (including in
DSPHost.cpp itself).
- Fixes disassembly when dumping code from DSP-LLE, which was using the
wrong endianness and giving totally bogus output.
- Reveals error messages of the format, "Bah! ReadAnnotatedAssembly
couldn't find the file ../../docs/DSP/DSP_UC_AX_07F88145.txt," which
seems to be intended behavior that was previously hidden.
This change centralizes all of the path handling and file writing logic
in DumpDSPCode. DSP-HLE also gains the feature of DSP-LLE to
automatically disassemble dumped code and write it to an accompanying
text file.
With the relocation of DumpDSPCode to DSPCodeUtils, the only remaining
function in DSPLLETools is DumpCWCode. This function 1) is not used
anywhere (not even in DSPTool), 2) doesn't seem to really do anything,
and 3) has a single comment saying "TODO make this useful :p"
This is something that should be the responsibility of the frontend
booting the game. Making this part of the host 'interface' inherently
requires frontends to leak internal details (much like the other
UI-related functions in the interface).
This also decouples more behavior from the debugger and the
initialization process in the wx frontend. This also eliminates several
usages of the parent menubar in the debugger code window.
VolumeDirectory doesn't support necessities like TMDs,
so thanks to 5.0-2172 (18968ab), EmulatedBS2_Wii crashes
when the inserted disc is a VolumeDirectory.
This commit fixes that.
This commit makes our DOL booting code very similar to our
ELF booting code. One exception is that the DOL booting
code still always calls SetupBAT. (Note that EmulatedBS2_GC
calls SetupBAT even if no disc is inserted.) I'm not sure
if there's a point to the difference, but I thought I'd
better avoid changing it so that I don't break anything.
For thread safety reasons, the currently inserted volume must
only be accessed by the DVD thread (or by the CPU thread if it
calls DVDThread::WaitUntilIdle() first). After this commit,
only DVDThread.cpp can access the volume, which prevents code in
other files from accessing the volume in a non-threadsafe way.
Direct access to the WAD bytes is required to read contents with proper
padding data (since they can sometimes end up being outside of the
data app section). Allowing the whole buffer to be accessed directly
would be error prone, so this commit adds GetContent() to WiiWAD
for getting raw content data by index.
These cannot be booted, so it is bad UX to show them in the UI as if
they were regular titles, and yet have different behaviour for them.
And technically, there is no reason to allow them to be used to boot
in the first place.
Another reason they should not be shown is that Dolphin fails
spectacularly with WADs that have a valid boot content index, but are
not PPC titles (e.g. IOS WADs). The only reliable way to avoid this
is to check for the title type and only show channels, just like
the Wii System Menu.
Mistakenly used the wrong TMD to clean up the import.
The original TMD is the one that is supposed to be used when
cancelling an import, but I forgot it's in the /import directory after
starting an import.
This exposes all ES title management ioctlvs to avoid duplicating IOS
code everywhere and to make it easier to reuse (since this way it's
not unnecessarily tied to the PPC IPC mechanism anymore) and unit test.
Some functions were also renamed for consistency with the other names,
*and* with official names.
It's better to just let the calling code provide a volume
object instead of needing one SetVolume for each way of
creating a volume. This simplifies InsertDiscCallback and
is needed for the following commits.
Just like DeleteTitle, Using CNANDContentManager is overkill,
inefficient and useless. And it results in a few failures in
situations where a delete should just always work.
But here it gets bonus points, because it manages to actually use
the TMD for deleting contents, when IOS does none of that and just
deletes files ending with .app in the title content directory. :)
This enables constructing an IOS instance that is not tied to emulation
and that can be simply used for internal purposes (ES, FS).
NAND root initialisation was moved to IOS since we cannot rely on HW
doing that for us anymore, and technically the NAND is entirely managed
by IOS anyway.
Default column width was being used for math related to automatic column sizing, in the case of COLUMN_SIZE the default width was -1 which resulted in an issue where an errant scrollbar would appear.
The MemoryWindow.cpp strings should be the same as the
MemoryCheckDlg.cpp strings so that translators don't
have to translate very similar strings twice.
Also adding i18n comments. These strings are *very* easy
to misinterpret in my opinion.
This is unsafe, because the NAND should not be accessed and messed with
while it is being used. In fact, this kind of inappropriate behaviour
will not be possible when we get NAND image support.
And even if there were no safety issue, there is still no reason
a *getter* function should *do* something that has lasting effects
on user data. GetWiiFSPath() should *just* return a path!
This adds code to update the PPC's UID and GID, which fixes a
regression with the system menu. Ideally, we would simply rely on IOS's
ES_Launch here and not duplicate the logic here, but we cannot do that
properly until the direct WAD launch hack is dropped, *and* until the
IOS changes that would enable internal calls are ready.
Since this fixes a semi-important regression with managing saves from
the SM, and the duplication is not too terrible, I believe it is a good
idea to get this fixed right now to avoid affecting users too much.
I do plan to fix this properly in the future.
* CNANDContentManager does things that are absolutely useless. In
particular, it parses the ticket, the TMD, reads contents, etc.
when we only need to remove the title directory.
* This means it will fail if the ticket cannot be found, when that
should not be the case.
* This also obviously caused DeleteTitle to be incredibly inefficient.
* We are already removing the title directory later in the function,
as CNANDContentManager does not even delete titles correctly.
DeleteTitle != DeleteTitleContents.
Since these button names are printed on all real controllers,
we should show them in the same way as they are printed on
the controllers, regardless of the user's language. It seems
like this was intended all along (except for "Start"), but the
_ markers in TASInputDlg.cpp (accidentally?) led to the button
names in the controller configs also becoming translatable.
I'm making exceptions for "L" and "R" because translators
may want to mark them in some way (for instance "L-Digital")
to clarify the difference from "L-Analog" and "R-Analog".
I'm also making an exception for START/PAUSE because it's
referred to as スタート in Japanese games.
I'm changing "Home" and "Start" to uppercase for consistency
with how Nintendo refers to those buttons, and because someone
who isn't familiar with the Latin script might not know the
connection between the lowercase and uppercase letters (most
users likely do know the connection, but we shouldn't assume it),
and because leaving "Start" as "Start" makes it "collide" with
unrelated strings, such as the string for the button that starts
a netplay session.
To rename "Start" and "Home" without breaking INI
compatibility, I added a ui_name variable like in f5c82ad.
* It should take a ticket view, not a title ID.
* It's missing a lot of checks.
* It's not deleting tickets properly.
* It's not deleting only the ticket it needs to delete.
* It should not return -1017 when the ticket doesn't exist.
* It's not returning the proper error code when a read/write fails.
* It's not cleaning up the ticket directory if there is nothing left.
This commit fixes its implementation.
* Supporting other ticket types makes the logic slightly more complex.
* There have been no such non-RSA2048 tickets seen during the Wii's
lifetime.
* The Wii's IOS doesn't even have support for them.
Stops CMake from saying "BlueZ NOT found, disabling bluetooth support"
on other OSes. Windows, macOS, and Android support Bluetooth using other
libraries. I'm not sure if non-Linux, non-Android Unices (like FreeBSD)
need another message?
The accuracy doesn't match ppc, and worse, it doesn't set the error flags if the input is zero.
Lets stop to ship broken instructions, so right now, the interpreter is the closest one.
Tillmann Karras