Jan 04 22:55:01 <leoetlino> fwiw, it looks like there are new warnings in the RegCache code
Jan 04 22:55:04 <leoetlino> Source/Core/Core/PowerPC/Jit64/FPURegCache.cpp:13:33: warning: declaration shadows a variable in the global namespace [-Wshadow]
Jan 04 22:56:19 <@Lioncash> yeah, the jit global should have a g_ prefix.
This fixes shadowing warnings and adds the g_ prefix to a global.
Other settings options are nouns rather than verbs so this change makes the configuration option consistent with others. Also makes the menu option label the same as the windows title.
The constructor shouldn't be used as a dumping ground for all UI-related
initialization. Doing so makes it somewhat more difficult to reason about
how certain UI elements get created. It also puts unrelated identifiers in
the same scope.
This separates the UI creation out so code relevant to each component
is self-contained.
Doing it from the add dialogs instead would prevent the call to these dialogs outside of a breakpointWindow which would be necessary for hotkeys binding.
Instead of needing different switch cases for
converting countries to regions in multiple places,
we now only need a single country-to-region switch case
(in DiscIO/Enums.cpp), and we get a nice Region type.
This is done to not have the device combo box be too small in width when making the main sizer fit into the window. Not fitting the sizer would alternatively break Hidpi so it was best to just add an empty sizer to workaround this problem.
I think it's best to remove these if we are going to be adding new hotkeys since these would work no matter what so I can simply make these the default one instead.
Windows-1252 was sometimes being referred to as ASCII or ANSI
in Dolphin, which is incorrect. ASCII is only a subset of
Windows-1252, and ANSI is (rather improperly) used in Windows
to refer to the current code page (which often is 1252 on
Western systems, but can also be something entirely different).
The commit also replaces "SJIS" with "Shift JIS". "SJIS"
isn't misleading, but "Shift JIS" is more commonly used.
This fixes a bug which caused Movie (input recording or playback) or
netplay not to be stopped. DolphinWX previously triggered a STM power
event, and then the STM directly stopped the emulation; the code
which stops Movie/Netplay was completely skipped.
This is fixed by moving it /before/ sending the shutdown event.
OnBootDrive used the "drives" member std::vector for drive paths, but
since PR #4363, this vector is not populated anymore, so we were
accessing it out of bounds.
Actually, drives was not needed in the first place, since we can
get the wxMenu from the event, and from there, get the label directly.
This is more logical as the mic is plugged into an EXI slot so it should be configured via the GameCube config dialog. This also allows to pass the right port number for the new dialog.
Makes the information panel self-contained.
This was done first, as opposed to isolating the GameConfig panel--the
first panel in the group--as this panel had code all over the place in
ISOProperties, so I figured it'd be best to fix this one up first.
The SDL backend crashes when you close a joystick after SDL_Quit has
been called. Some backends don't need to be shutdown and
re-initialized everytime, we can just ask to enumerate devices again.
Hotkeys
Make a new class that inherits from InputConfigDialog with a specialised constructor. The changes are mainly the top portion and it now uses tabs to categorise the hotkeys.
Redo the GCPad configuration dialog
The layout is similar, but it now allows flexibility to change it more easily.
Redo the GC Keyboard configuration dialog
Same layout.
Redo completely the Wiimote configuration dialog
Separated the controls into 2 tabs to make them less imposing overall.
Redo the Nunchuk configuration dialog
Similar layout, except for 2 control group sizers.
Redo the Classic controller configuration dialog
Same layout.
Redo the Guitar input configuration dialog
Stacked 2 sets of group together.
Redo the Turntable configuration dialog
More stacked groups and the window is much less wide.
Just setting up a switch on the type so that different dialogs can be instantiated. This also makes the extension type an enum because I don't see why not here and finally, it removes ControlGroupSizer. This removal allows to not dynamically generate the UI, but instead, let the specialised constructors do the layout.
Removed the unecessary forced tabbed layout, removed the layout part of the constructor and remade some method in preparation for tabbed styled input dialog such as the new hotkey configuration one. It breaks every inputconfigDialog, but this will get fixed in the next commits.
Also moved to a folder since there will be many more files created in the next commits so it gives better separation.
Making changes to ConfigManager.h has always been a pain, because
it means rebuilding half of Dolphin, since a lot of files depend on
and include this header.
However, it turns out some includes are unnecessary. This commit
removes ConfigManager includes from files which don't contain
SConfig or GPUDeterminismMode or GPU_DETERMINISM (which means the
ConfigManager include is not used).
(I've also had to get rid of some indirect includes.)
This eliminates public usage of the GetMenuBar() function in CodeWindow.
The benefit of this is it also gets rid of the need to perform direct
access across the config dialog and the main frame. It also gets rid of
the use of the main_frame global.
GetMenuBar() will be removed entirely from CodeWindow in a follow-up that
also removes any related remnants of code made obsolete with its removal.
Gets rid of more menu-related code from CodeWindow and puts it back in
CFrame where it belongs.
This turns the previous menu update function within CodeWindow into one
that simply updates the debugger font for its managed controls. It also
improves how the font is actually updated. Previously, fonts would change,
however this wouldn't actually reflect onto the respective controls until
a refresh or update event occurred. Since codeview, callstack, symbols,
callers, and calls windows are all managed by a wxAuiManager instance,
calling Update() on it after the font has been set will reflect font
changes immediately.
This not only fixes a regression where toggling a breakpoint using the CodeWindow would cause a Center PC, but it also removes several redundant JumpToAddress(PC) calls.
On Linux, the FindFocus method from wx simply doesn't work, it would on some environment report that dolphin has the focus while it doesn't have it. This is why an alternative method has to be used which is to set a focus flag whenever the render frame gets activated.
The usage of "Wii Remote" and "Wiimote" in the interface is inconsistent. "Wiimote" is also not a real word nor is it an official product name. Therefore I have changed instances of "Wiimote" in the UI to instead say "Wii Remote". I also made a couple of minor grammatical changes as well.
This is mostly a resubmission of #4338 but there are some minor other changes as well.
Currently, `g_controller_interface` is initialized and shut down by each
of `GCKeyboard`, `GCPad`, `Wiimote`, and `HotkeyManager`.
This 1) is weird conceptually, because it necessitates passing a pointer
to the native window to each of those classes, which don't need it, and
2) can cause issues when controller backends are initialized or shutdown
multiple times in succession.
For Wii graceful shutdown to work, the emulated software has to open
the STM event hook and install a hook. Without this, there is no way
to inform them about the shutdown, so trying to do a graceful shutdown
and requiring the use of the shutdown fallback (exiting a second time
to force) is pointless.
Previously Dolphin would only exit if the main window is closed,
and Confirm on Stop is enabled.
This makes Dolphin's behaviour more consistent by always exiting
if the main window is closed or on shutdown signal.
Unifies the creation of all the menus into the main frame class.
Now it isn't spread out across the main frame and the code window.
This doesn't alter the placement of the handling functions, as this would
involve unrelated changes, since it would require modifying where
window-related variables are placed. This will be amended in a follow up
changeset.
Keeps related menu items together based on top level menu. This will be
more convenient in the future when debugger menu bar item handling is
moved to CFrame, as it won't be a huge amount of code in one function.
This also makes it easier to locate menu bar code whenever it needs to be
changed.
Instead of directly reading/storing settings from/to the SYSCONF, we
now store Wii settings to Dolphin's own configuration, and apply them
on boot. This prevents issues with settings not being saved, being
overridden and lost (if the user opens a dialog that writes to the
SYSCONF while a game is running).
This also fixes restoring settings from the config cache after a
graceful shutdown; for some reason, settings were only restored
after a normal shutdown.
Fixes issue 9825 and 9826
This is done to remove confusions among potential debugger users and to also make it more accurately tell what this feature is actually doing. Despite being true that it is using a memcheck (and it certianly checks that memory), the idea being to break on a memory access isn't really obvious especially considering that memchecks are also used in full MMU emulation to handle exceptions. It also doesn't help that memchecks are now supported in every builds.
It also changes the corresponding log because this log would be wanted by the user which means it should be more obvious that it was caused by the "memory breakpoint".
Setting a single icon at a single resolution doesn't scale well,
Windows requires a 16x16 icon for the window and a 32x32/48x48 for
the taskbar. Providing all icons produces less pixellated results at
HiDPI.
Changes:
- MemoryWindow was cleaned up and gives more feedback on searches.
Some bugs were fixed as well:
- A complex bug that allowed tearing off tabs and opening multiple
copies of a debug panel which lead to segfaults
- Another segfault related to right-click menus on code/memory views
when those tools were floating in their own window.
Resolved "TODO" for Texture Cache safety, added explanation message.
Resolved "TODO" for default description, no longer uses default text for sizing
Fixed a memory leak in PostProcessingConfigDiag where it was never freeing any
of the objects it allocated in its constructor.
Minor design change to PostProcessingConfigDiag to give padding around elements
consistent with the rest of Dolphin's user interface (5px).
Changed the Cheat Search tab to disable the scan buttons while there is
not a game running and enable when it starts. Also added double-click to
create code to the result list.
Required a partial rewrite of the image loading code because it was working in
unscaled wxBitmaps. Needed to make it produce wxImages and scale them instead.
And related ARCodeAddEdit/PatchAddEdit.
Change ISOFile to use wxImage instead of wxBitmap since bitmaps require
a screen context and banner images have a fixed resolution.
Some OSD messages were displayed in RenderBase.cpp using global variables and some code duplicated
in OnScreeDisplay.cpp.
Now all messages are displayed using functions in the OSD namepace.
* OSDChoice and OSDTime global variables are gone
* All OSD logic is kept at the same place
* All messages are properly aligned
* Clean characters for all OSD messages
Original commit:
commit f0ec61c057
Author: Aestek <thib.gilles@gmail.com>
Date: Sun Aug 7 16:08:41 2016 +0200
Add a context menu entry in main game list to host a netplay game
based on saved settings.
Original commit:
commit 91aaa958e6
Author: Aestek <thib.gilles@gmail.com>
Date: Sun Jul 24 14:51:37 2016 +0200
There was a bug that caused MemoryView to indirectly cause a segfault;
the simplest way to reproduce it is 1) start a game; 2) stop the game;
3) click on the Refresh button and watch Dolphin segfault.
This commit fixes it by only calling PowerPC::HostIsRAMAddress when
emulation is running.
The ControllerConfigDiag design was getting confusing, so more
significant changes needed to be done.
Firstly, the GC controller and the Wiimote section layouts have been
aligned for consistency.
The Balance Board source chooser is a checkbox.
The "general settings" that affect the SYSCONF have been moved to the
Wii pane in the Config dialog. It makes more sense because those
affect the Wii's settings in the NAND, unlike the other options.
Another reason for moving it is that the Controller Config Dialog was
getting pretty crowded, and the whole section is disabled when
emulation is running, which is wasted space.
The Wiimotes section is now organised by two radio buttons. One is for
the Passthrough Mode, with sync/reset buttons under it; the other is
the emulated Bluetooth mode, which still has the regular Wiimote source
choosers, the Continuous Scanning controls and the Enable Speaker Data
option (which only applies to the emulated BT mode).
Hopefully this should make things a bit clearer and look cleaner.
(This is a monolithic commit because separating UI changes is hard)
This adds the ability to passthrough a whole Bluetooth adapter and skip
the majority of the Bluetooth emulation code. We use libusb to send HCI
commands, receive HCI events and transfer ACL data directly to the
first adapter that is found or to a specific adapter (if configured to)
This is possible because the Wii's Bluetooth module is actually just
a pretty standard Bluetooth adapter…
…except for two vendor-specific commands, for which replies are faked,
and also for the sync button. This adds a hotkey that works in the
exact same way as the sync button would on a Wii: it triggers an HCI
event, which emulated software interpret as a command to perform
a BT inquiry.
This commit also changes the UI code to expose passthrough mode
and WII_IPC_HLE to be a bit more thread safe (for the device map).
wxWidgets causes a segfault if Host_ConnectWiimote is called and we try
to create an event from the Wiimote scanner thread while the GUI is
still initialising.
Same thing but allows both GeckoCode and Code to be utilized directly
without predicates for equality/inequality in stardard algorithms
The size check for std::vectors is unnecessary, as this is built into std::vector's operator==
Deleting instead of overwriting makes the INI cleaner.
Also, in case we change defaults in the future, users will
get the new default when using a new version even if
they have pressed the Reset button in an older version.
This adds support for triggering the power event (in the STM), so that
stopping emulation first triggers a shutdown event, which notably gives
emulated software time to save game data (issue 8979) and clean up
SYSCONF (to disconnect Wiimotes and update their state in the SYSCONF).
On the first press, the stop button/hotkey/whatever will trigger a STM
power event. On a second try, we will forcefully stop emulation, just
like how it was working before.
This is needed because for some reason the WSI for NV Vulkan drivers
doesn't return VK_ERROR_OUT_OF_DATE_KHR, so there is no other way to know
that a resize has occured apart from polling, which is a poor solution for
X11 (since it is blocking).
Considering there's a public method in the class using it, leaving the
definition in the cpp file can cause a linker error if any method outside
that cpp file calls it for one reason or another.
Single step: Fix an oddity when a breakpoint is hit at the beginning of a block, then after, a single step is performed and finally, hitting play, the breakpoint will be skipped even in the case when it would be hit again. This was done by using the interpreter version of single step. Also, remove some redundant update request.
Step over: fix some GUI lags.
Step out: Add consideration for conditional branching by checking the condition as the interpreter does. Now, every bclr instructions except those that changes the LR (because it would not be the end of the function) will cause the end of the step out and not just blr instructions. Also now stops if a bp is detected and finally, remove redundant GUI updates calls.
This also removes a superfluous draw call on the GUI as the codeView was refreshing twice per event to do so.
The old one wasn't very optimal because not only the user would likely want to enter an address instead of a range, but it also made entering just one address confusing (you had to have the same value on both start and end). Also, you should only chose one option between read, write or both, there is no point to not have any.
This is why I made more clear how to add an address and it is the default option using radio buttons and I also made the action flags and the flags to be radio buttons.
This is the same as PR #3991, but for MainNoGUI.
nogui/headless will shut down cleanly on SIGINT and SIGTERM, just like
it would when closing the render window.
The default signal handler will be restored after a first shutdown
signal so a second signal will exit Dolphin forcefully.
Fixes the issue on macOS where quitting Dolphin from the Dock causes a
crash report (https://bugs.dolphin-emu.org/issues/9794). I'm not
exactly sure why this works, but it feels right and it turns out to fix
the problem.
This adds a recenter control binding which allows recentering the
cursor when relative input is enabled.
(EnableSettingControl is renamed to avoid confusions.)
This makes the GUI show the settings that are loaded when the config
gets reloaded, instead of showing potentially outdated settings that
are not applied.
This adds an option to enable relative input for the Wiimote IR
as described in issue 9014.
Enabling it will result in the pointer not going back to the centre
and the inputs will control the direction, not the absolute position.
Also adds a Dead Zone setting which is really needed when relative
input is enabled to prevent the cursor from slowly drifting on
most controllers. (Note: the Deadzone setting has no effect when
relative input is disabled)
Doing this forces the window to be drawn before reparenting it. It fixes the possibility of creating an empty floating window if the selected tab wasn't corespoinding to the window.
There might be a better way to highlight the options when adding the memory check, but for now, this works and the breakpoint list reports the right settings anyway.
It wouldn't impact performance until at least one memcheck is enabled. Because of this, it can be used in release builds without much impact, the only thing that woudl change is the use of HasAny method instead of preprocessor conditionals. Since the perforamnce decrease comes right when the first memcheck is added and restored when the last is removed, it basically is all beneficial and works the same way.
All formatting are individual per registers and they all have one option to go back to their original hexadecimal form.
- GPR: signed integer, unsigned integer, float
- FPR: double
Also happened to come accross an issue where editing the PFR would ignore the higher 32 bits of the new value, this had to be fixed for the format to work.
This removes a Dolphin-specific patch to the wxWidgets3 code
for the following reasons:
* Calling wxWindowGTK::DoSetSize on a top-level window can end up
calling wxTopLevelWindowGTK::DoMoveWindow, which triggers an assert
because it is not supposed to be called for a top-level wxWindow.
* We should not be patching the wxWidgets code because that means the
toolbars will still be broken if someone builds without using the
WX that is in our Externals.
Instead, we now use a derived class for wxAuiToolBar and override
DoSetSize() to remove the problematic behaviour to get the same effect
(fixing toolbars) but without changing Externals code and without
causing asserts and other issues.
For step over, it was updating twice which actually made the red display on the register view (when a register changes since) malfunction. Since it doesn't seem to be usefull to update before AND after the run, the one before the run was removed.
For step out, well, because there was no chances given for the thread to run as it is single stepping all the time, I only added a call to update after it was done.
Dolphin no longer lowers itself below the top window when opening.
Dolphin no longer draws garbage lines all over the game list.
Use the correct platform macros so Dolphin can actually find the
translation catalogs on Unix.
Both those in the code window and the ones that appears when the user select edit perpective. The one that isn't fixed by this is in edit perspective mode, when the user drags a panel out and it becomes a floating window.
The 'revert' functionality is some very old left-over and isn't even working properly (read: could break Wiimote mapping). As no dialog features any cancel and revert functionality it is removed.
The original code assumed that we would always find a button in
control_buttons. However, this is incorrect, since the iterator can and
will be control_buttons.end() if the button that triggered the iterate
code is not in control_buttons, which happens when it's in an
exclude list.
When 5.0-211 updated wxWidgets to 3.1.0, some entries in the
wxLanguage enum were moved and added, changing the wxLanguage
values. Because we save Dolphin's interface language to disk
as a wxLanguage, the language you have set will mean something
different depending on whether you have the updated wx version
or not. For instance, setting the language to English with the
updated version and then using an older version will make
Dolphin use Dutch. Because we can't rely on the enum anymore,
I'm replacing the "Language" setting with a "LanguageCode"
setting that uses standard ISO 639 codes.
Add the CCodeWindow to the constructor of the memoryWindow so it can call the notify update of the breakpoint list.
Add the case of breakpoint update when receiving an event (the update command was issued, but wasn't managed before).
Run clang format and renamed the code window names.
Let's stop pretending that we support Triforce emulation.
Keeping this code around just in case someone will make
major improvements in the future isn't really worth it.
I'm keeping the Triforce game INIs so users will know that
the compatibility rating for Triforce games is 1 star (broken).
OSD messages other than these one and a half aren't translated,
and OSD only supports ASCII. (Also, that "Wiimote %i %s" uses %s
like it does is bad for translation, but that's easy to fix.)
The default size might be too big for some screens. This allows
the user to modify the window as they see fit and has Dolphin
remember those settings. People who are happy with the default
size and position will not be affected
There is no reason to prevent the user from closing the config dialog
if the device is not found. It's not very good UX…
Also fixes ExpressionParser to return NO_DEVICE if the device doesn't
exist instead of SUCCESS.
This adds RemoveDevice() to ControllerInterface, fixes ExpressionParser
and some other code to support device removals without crashing,
and adds an IsValid() method to Device, to prepare for hotplugging.
Pausing emulation requires to access the CPU thread, which might be blocked
waiting for inputs by netplay. Accessing it in this state would cause the
whole GUI to hang for set timeout (10s).
Once a tab is selected the focus can be set directly from the page
changed event. However once the tab was shown, the first tab order
control element was given the focus by default. This was fixed by
delaying the action and setting the focus after the default focus
had been assigned.
* Focus "Hash Code" / "IP address" text box by default in "Connect"
* Focus game list in "Host" tab
* RETURN keypress now host/join depending on selected tab
* Remember last hosted game
* Remove PanicAlertT:
* Simply log message to netplay window
* Remove them when they are useless
* Show some netplay message in OSD
* Chat messages
* Pad buffer changes
* Desync alerts
* Stop the game consistently when another player disconnects / crashes
* Prettify chat textbox
* Log netplay ping to OSD
Join scenario:
* Copy netplay code
* Open netplay
* Paste code
* Press enter
Host scenario:
* Open netplay
* Go to host tab
* Press enter
This is something that was quite confusing for me while trying to get
netplay to work for me; once the Connect/Host buttons were pressed,
the UI would hang, only to work again a few seconds later, but with
no error message or explanation *at all*.
Turns out this is because panic alerts are shown in the netplay window
instead during netplay, even before it is even shown.
This fixes it by "piping" the alerts to the netplay chat only if the
netplay window is visible.
(regression introduced in #3823)
This makes the links explicitly vertically centered in the DolphinWX
About dialog. It is not needed on Windows, because the links have the
same height as text (and look just like text links). However, this is
required on other platforms or the links would look misaligned.
At first there weren't many enums in Volume.h, but the number has been
growing, and I'm planning to add one more for regions. To not make
Volume.h too large, and to avoid needing to include Volume.h in code
that doesn't use volume objects, I'm moving the enums to a new file.
I'm also turning them into enum classes while I'm at it.
The Setting class was used for both numeric values and booleans, and
other parts of the code had hacks to make it work with booleans.
By splitting Setting into NumericSetting and BooleanSetting, it is
clear which settings are numeric, and which are boolean, so there is
no need to guess by checking the default values or anything like that.
Also, booleans are stored as booleans in config files, instead of 1.0.
This changes Refresh() to use the existing scanning thread to scan for
devices, instead of running the scan on the UI thread and blocking it.
Also makes the UI thread not block when Continuous Scanning is disabled
and removes duplicated code.
Should fix issue 8992.
Under the hood:
* The scanning thread is now always active, even when continuous
scanning is disabled.
* The initialize code which waits for Wiimotes to be connected also
uses the scanning thread instead of scanning on yet another thread.
* The scanning thread now always checks for disconnected devices, to
avoid Dolphin thinking a Wiimote is still connected when it isn't. So
we now check if we need new Wiimotes or a Balance Board at scan time.
This makes it clear that sending a signal a second time will force stop
Dolphin (which is useful in case the GUI is deadlocked or otherwise
unable to react to the signal).
This makes DolphinWX shut down cleanly, just like it would with
File->Exit when it receives a SIGINT, SIGTERM (Unix) or some signals
on Windows.
The default signal handler will be restored after a first shutdown
signal so a second signal will exit Dolphin forcefully.
When Movie was calling ChangeDisc, it was moving execution to
the host thread just to then make the host thread the CPU thread.
We can simply run the code directly on the CPU thread instead.
From wxWidgets master 81570ae070b35c9d52de47b1f14897f3ff1a66c7.
include/wx/defs.h -- __w64 warning disable patch by comex brought forward.
include/wx/msw/window.h -- added GetContentScaleFactor() which was not implemented on Windows but is necessary for wxBitmap scaling on Mac OS X so it needs to work to avoid #ifdef-ing the code.
src/gtk/window.cpp -- Modified DoSetClientSize() to direct call wxWindowGTK::DoSetSize() instead of using public wxWindowBase::SetSize() which now prevents derived classes (like wxAuiToolbar) intercepting the call and breaking it. This matches Windows which does NOT need to call DoSetSize internally. End result is this fixes Dolphin's debug tools toolbars on Linux.
src/osx/window_osx.cpp -- Same fix as for GTK since it has the same issue.
src/msw/radiobox.cpp -- Hacked to fix display in HiDPI (was clipping off end of text).
Updated CMakeLists for Linux and Mac OS X. Small code changes to Dolphin to fix debug error boxes, deprecation warnings, and retain previous UI behavior on Windows.
Small cleanup by using std::shared_ptr and getting rid of
ciface.Devices() which just returned the m_devices (which defeats the
point of making m_devices protected).
Incidentally, this should make the code safer when we have
different threads accessing devices in the future (for hotplug?).
A lot of code use Device references directly so there is
no easy way to remove FindDevice() and make those unique_ptrs.
Fully opt-in, reports to analytics.dolphin-emu.org over SSL. Collects system
information and settings at Dolphin start time and game start time.
UI not implemented yet, so users are required to opt in through config editing.
Cleanup code style.
Move ActionReplay code->INI saving into ActionReplay namespace.
Threadsafety Cleanup: ActionReplay is accessed from the Host, Emu
and CPU Threads so the internal storage needs to be protected by a
lock to prevent vectors/strings being deleted/moved while in use by
the CPU Thread.
UI Consistency: Make ARCodes behave like Gecko Codes - only apply
changes when Apply is pressed. Save changes to INI from CheatsWindow.
ISOProperties/CheatsWindow now synchronize with each other.
ISOProperties loads codes using ActionReplay::LoadCodes which actually applies
the codes to the global state. If a game is running then that games receives
all the codes (and ACTIVE status) from the second game being shown in
ISOProperties which is not desirable.
EndPlayInput runs on the CPU thread so it can't directly call
UpdateWantDeterminism. PlayController also tries to ChangeDisc
from the CPU Thread which is also invalid. It now just pauses
execution and posts a request to the Host to fix it instead.
The Core itself also did dodgy things like PauseAndLock-ing
from the CPU Thread and SetState from EmuThread which have been
removed.
Fix Frame Advance and FifoPlayer pause/unpause/stop.
CPU::EnableStepping is not atomic but is called from multiple threads
which races and leaves the system in a random state; also instruction
stepping was unstable, m_StepEvent had an almost random value because
of the dual purpose it served which could cause races where CPU::Run
would SingleStep when it was supposed to be sleeping.
FifoPlayer never FinishStateMove()d which was causing it to deadlock.
Rather than partially reimplementing CPU::Run, just use CPUCoreBase
and then call CPU::Run(). More DRY and less likely to have weird bugs
specific to the player (i.e the previous freezing on pause/stop).
Refactor PowerPC::state into CPU since it manages the state of the
CPU Thread which is controlled by CPU, not PowerPC. This simplifies
the architecture somewhat and eliminates races that can be caused by
calling PowerPC state functions directly instead of using CPU's
(because they bypassed the EnableStepping lock).
This commit does 4 things:
* It increases the default small size of the NetPlay window to a larger
and more appealing size.
* It cleans up and reorganizes a bit of the NetPlay Setup UI code.
* It moves the Direct or Transversal Selector to be more appealing and
nice looking.
* The Direct or Transversal also gets a label and nicer text, and a
spacer.
DriveReader::m_size was never initialized which was indirectly
causing CGameListCtrl to crash Dolphin when it tried to insert a
character at a negative index in a string.
Reading one sector at a time is very inefficient and appears to
be causing timing issues during boot so SectorReader has been
enhanced to support batching.
SectorReader has been given a working cache system.
Closing Dolphin's main frame and clicking "no" does not clear
m_bClosing which means that pressing the "stop" button triggers
OnClosed which suddenly and unexpectedly closes the main frame.
This was done because showing a column was broken:
Showing a column repopulates the column with no regard for the sorted
order. This results in a seemingly random order.
(actually the order of m_ISO_FILES)
The D3D backend was always forcing Anisotropic filtering when that is enabled regardless of how the game chose to configure the texture filtering registers; this causes the same issues as "Force Filtering" without Anisotropy, such as causing game UI elements to no longer line up adjacent correctly. Historically, OpenGL's Anisotropy support has always worked "better" than D3D's due to seeming to not have this problem; unfortunately, OpenGL's Anisotropy specification only gives GL_LINEAR based filtering modes defined behavior, with only the mipmap setting being required to be considered. Some OpenGL implementations were implicitly disabling Anisotropy when the min/mag filters were set to GL_NEAREST, but this behavior is not required by the spec so cannot be relied on.
Léo Lam