In the cases where we support the binding layout keyword, use it for more than binding UBO location.
This changes it so it is supported for samplers as well.
Instances when this is enabled is if a device supports GL_ARB_shading_language_420pack, or if it supports GLES 3.10.
s_encodingPrograms is defined as an array with a length of 64
NUM_ENCODING_PROGRAMS is also defined as 64.
However 64 is out of bounds, so we want to be comparing for "equal to or
greater than here"
- Isolate it into it's own namespace
- Shorten function names, the namespace self-documents.
- Just use the std I/O, we can just write directly to the stream for
logging.
gcc doesn't optimize this loops with -O2, so using memset now.
A flag to skip the clear funktion was added as the cache is already cleared most of the time.
We need to pull in function pointers for OpenGL 3.0 in order to use glAttribIPointer.
This isn't too big of an issue, and this code will be gone in the future when we change over to libepoxy.
Just need to push code upstream to libepoxy to support Android with GLES and GL first.
This matches how ARM handles their naming in their drivers for different models.
Really it's that way because both Mali-T6xx and Mali-T7xx fall under Midgard.
While everything else (except Mali-55) fall under Utgard.
They are similar enough that they will share bugs with their drivers, so make them fall under the same Mali-Txxx umbrella of bug issues.
If there is ever a need in the future for having separate bugs depending on family, we can support that then.
This is the only way we can determine the video driver version with mali.
Really it's a good thing that they only push driver updates once every two years, makes it easy to determine what driver anybody is running.
GLSL ES 3.10 adds implicit support for the binding layout qualifier that we use.
Changes our GLSL version enums to bit values so we can check for both ES versions easily.
The variable is already dereferenced both before and after this
check which means that if this variable would ever be zero it would
have crashed dolphin already.
- remove unused variables
- reduce the scope where it makes sense
- correct limits (did you know that strcat()'s last parameter does not
include the \0 that is always added?)
- set some free()'d pointers to NULL
If there is an issue with a reported extension, disable it instead of failing out entirely.
Fixes an issue with buffer_storage that I had overlooked as well.
This changes from using logical and to bitwise and, which causes the compile time to drop from an absurd amount of time to around five seconds on my
crappy laptop.
This option was known to break every second game and only boost a bit.
It also seems to be broken because of streaming into pinned memory and buffer storage buffers.
v2: also remove dlc_desc
Older Qualcomm drivers rotated the framebuffer 90 degrees and this fix didn't work.
Now for some obscene reason it rotates a full 180 degrees.
This can at least be worked around by flipping around the image on our end.
On Windows, nvidia don't give us their driver version, so we can't workaround any issues.
As buffer_storage is broken on some drivers, we wanted to disble it for them.
So we can't.
Luckyly only "some" released driver versions are affected as this extension is only available since some months. Let's hope that nobody have to use one of this driver version, else they will get a black screen ...
OSX has their own driver, so performance issues aren't shared with the nvidia driver (unlike the closed source linux and windows nvidia driver). So now they'll also use the MapAndSync backend like all other osx drivers.
fixes issue 6596
I've also cleaned up the if/else block selecting the best backend a bit.
The only two devices that do this are Mesa software rasterizer and Intel Ironlake(With a few hacks).
Basically since it doesn't support OpenGL 3.0, it can't grab the version the new way.
So failing that, it sets to GL 2.1, and continues.
Further along, on Ironlake at least, it tries grabbing the extensions the new GL 3.0 way and fails.
So have a fallback that grabs the extensions string the old way, in probably the most elegant way possible.
The old way was to use big switch/case statements based on a type of buffer.
The new one is to use inheritance.
This change prohibits us to change the buffer type while running, but I doubt we'll ever do so.
Performance should also be a bit better. Also a nice cleanup.
Added some comments about this different kind of buffers.
This is a bit slower on map_and_* because of flushing and _very_ much slower on buffer(sub)?data because of a new memcpy.
But this design allow us to decode directly into a gpu buffer, eg vertexloader will profit :)
gl.h and glext.h provide most of the function pointer typedefs and defines for extensions and core features.
The only one it doesn't provide is GL 1.1 function typedefs, but this is to be expected.
If anything needs defines or typedefs in their header in the future, that's as easy as before.
This one was introduced to reduce the glBindTexture and glActiveTexture calls. But it was quite a bit of logic and only an improvment on uploading/creating a texture, which is done rarely.
This branch is the final step of fully supporting both OpenGL and OpenGL ES in the same binary.
This of course only applies to EGL and won't work for GLX/AGL/WGL since they don't really support GL ES.
The changes here actually aren't too terrible, basically change every #ifdef USE_GLES to a runtime check.
This adds a DetectMode() function to the EGL context backend.
EGL will iterate through each of the configs and check for GL, GLES3_KHR, and GLES2 bits
After that it'll change the mode from _DETECT to whichever one is the best supported.
After that point we'll just create a context with the mode that was detected
We are used to render them out of order as long as everything else matches, but rendering order does matter, so we have to flush on primitive switch. This commit implements this flush.
Also as we flush on primitive switch, we don't have to create three different index buffers. All indices are now stored in one buffer.
This will slow down games which switch often primitive types (eg ztp), but it should be more accurate.
add the GL include (back) to Base.props
use a similar technique to GLX.cpp (by Sonic) in WGL.cpp to get
wglSwapIntervalEXT without the WGLEW check
Conflicts:
Source/Core/VideoBackends/OGL/OGL.vcxproj
Source/Core/VideoBackends/OGL/OGL.vcxproj.filters
Source/VSProps/Base.props
This "u32 components" is a list of flags which attributes of the vertex loader are present.
We are used to append this variable to lots of vertex generation functions, but some of them don't need it at all.
The usual way to handle this kind of request is to rise a flag which the gpu thread polls.
The gpu thread itself either generates the result or just write zeros if disabled.
After this, it rise another flag which says that this work is done.
So if disabled, we still have the cpu-gpu round trip time. This commit just returns 0 on the cpu thread
instead of playing ping pong...
fixes issue 6898
OpenGL defaults are GL_REPEAT, which is even more unlikely than GL_CLAMP_TO_EDGE.
As I can't test the behavoir of the real hardware, I changed it to how it works before,
but I guess just clip the texture makes more sense.
Real xfb didn't provide any read_stride, so there is a division by zero.
This commit calculates the correct read_stride for real_xfb, so there is also no hack for texture vs xfb needed.
This is done with a pixel buffer object. We still have to stall the GPU, but
we only do it once per efb2ram call.
As the cpu can't access the vram, it has to queue a memcpy for the gpu and
wait for the gpu to finish this copy. We did this for every cache line which
is just stupid. Now we copy the complete texture into a pbo and readback this
at once. So we don't have to wait for lots of round-trip-times.
Also use attributeless rendering. But we need the src rect, so set it by uniform.
If there is a slowdown here (I doubt as the driver likely has a fast path to update uniforms)
then we should check if this rect changes and only then update the uniform.
We use attributeless rendering, so officially we have to bind _any_ VAO.
As the state of this VAO doesn't matter, we don't have to switch it.
Also fix an AMD issue as they don't like to render from an empty VAO.
We neither scale nor render from subimages, so we by using gl_Position, we don't have to generate _any_ vertices for this converting.
Also remove the glTexSubImage optimization as every driver does it when needed. But there are some workflows (eg on APU) where it's better to realloc this texture instead of a second memcpy or stall.
This fixes Real XFB Jaggies in OpenGL on games which use yscaling, such
as most PAL games.
This fixes the last of the "Real XFB Macroblocking" issues for opengl,
see issue #6503
Seems OpenGL ES 3 Requires you must have an lod argument, while Desktop
versions require you must not have a lod argument if you are using a
Sampler2DRect (which doesn't do Mipmapping).
Now OGL doesn't rely on WX for PNG saving.
FlipImageData supports (pixel data len > 3) now.
TextureToPng is now in ImageWrite.cpp/h
Video Common depends on zlib and png.
D3D no longer depends on zlib and png.
Revert "Actually, filename really does need to be a parameter because of some random debug thing."
Revert "fix non-HAVE_WX case"
Revert "Handle screenshot saving in RenderBase. Removes dependency on D3DX11 for screenshots (texture dumping is still broken)."
This reverts commits 00fe5057f1, 74b5fb3ab4, cd46138d29 and 5f72542e06 because taking screenshots in D3D still crashed for me so there was no point in the code changes (which I found ugly anyway).
D3D doesn't allow bigger viewports than rendertargets. But flipper does, so the viewport will be clipped and the transformation matrix will be changed.
This was done in the D3D backend itself. This is now moved into VideoCommon. This don't reduce code, but in this way, VideoCommon doesn't depend on the backends.
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
The upload in the backend isn't done, it's just pushed by the mostly removed SetMulti*SConstant4fv.
Also no optimizations was done on VideoCommon side, but I can start now :-)
Sorry for the hacky way, but I think this is a nice (working) snapshot for a much bigger change.
Ryan Houdek