The workaround added in 30f9f31 caused a regression where Dolphin
incorrectly replaced runs of one byte with runs of another byte
when writing WIA and RVZ files. ReuseID::operator< was always
returning false unless the ReuseIDs being compared had different
partition keys, which caused std::map<ReuseID, GroupEntry>
to treat all ReuseIDs with the same partition key as equal.
This actually eliminates any setting pertaining to SD cards from the
NetPlay dialog, as it would effectively just be a duplicate of the
setting in the Wii pane, potentially causing confusion.
This also enables save data writing by default, as this is probably
what most players want, and should avoid them losing hours of progress
because they forgot to tick a checkbox.
This implementation is pretty efficient in my opinion. And "As
long as we aren't falling back to interpreter we're winning a lot"
applies to basically every instruction to some degree anyway.
The dcbz instruction needs to lock W30 so that the slowmem code will
push and pop it when calling into C++. Also, the slowmem code expects
that the address is present in W0, so replace the use of W0 as a scratch
register in the fastmem code with the now locked W30.
We currently have a bug when calling Arm64GPRCache::Flush with
FlushMode::MaintainState, zero free host registers, and at least
one guest register containing an immediate. We end up grabbing
a temporary register from the register cache in order to be
able to write the immediate to memory, but grabbing a temporary
register when there are zero free registers causes the least
recently used register to be flushed in a way which does not
maintain the state of the register cache.
To get around this, require callers to pass in a temporary
register in the GPR MaintainState case. In other cases,
passing in a temporary register is not required but can help
avoid spilling a register (if the caller already had a
temporary register at hand anyway, which in particular will
be the case in my upcoming memcheck pull request).
release-ubu-x64 currently fails with "sorry, unimplemented: non-trivial
designated initializers not supported". pr-ubu-x64 doesn't for some
reason, but we might as well remove the designated initializer.
This fixes various texture offsetting issues with negative texture coordinates (bringing the software renderer in line with the hardware renderers). It also handles the invalid wrap mode accurately (as was done for the hardware renderers in the previous commit). Lastly, it handles wrapping with non-power-of-2 texture sizes in a hardware-accurate way (which is somewhat broken looking, as games aren't supposed to use wrapping with non-power-of-2 sizes); this has not been done for the hardware renderers.
A voice is considered running if and only if `running` equals 1,
not if `running` is not equal to 0.
This fixes https://bugs.dolphin-emu.org/issues/12508 because for some
reason *The Sims 2 - Castaway* sets `running` to 8 when a stream
finishes playing; previously our AX HLE would just loop the voice
and eventually crash after accessing invalid memory addresses.
Thanks to JMC47 and delroth's help, I've verified that this is the
correct check for the following ucodes:
GC:
* 0x3ad3b7ac
* 0x3daf59b9
* 0x4e8a8b21
* 0x07f88145
* 0xe2136399
* 0x3389a79e
Wii:
* 0x347112ba
* 0xfa450138
* 0xadbc06bd
And while I was fixing the running check, I noticed that the is_stream
field was also being handled incorrectly, so I've fixed that as well.
Putting AX functions from AXVoice.h in an anonymous namespace does
successfully prevent compilers from merging those functions and
allows us to avoid ODR violations.
However, tools such as gdb still mix up AX GC and AX Wii functions
and variables because those have the exact same symbol names.
This can be fixed by using inline namespaces which are transparent
at the source code level but forces AX GC and AX Wii symbols to be
different.
The fast path of using CVTSD2SS/FCVTN rounds the significand if it
can't be exactly represented as a single, whereas the accurate path
instead truncates the significand. So we should only use the fast
path if we know that the lower bits of the significand are not set.
This is not known to affect any games.
Passing a width of 64 and registers encoded as double to
DUP resulted in an invalid instruction. The registers should
be encoded as quads in this situation.
Fixes https://bugs.dolphin-emu.org/issues/12575.
Manually encoding and decoding logical immediates is error-prone.
Using ORRI2R and friends lets us avoid doing the work manually,
but in exchange, there is a runtime performance penalty. It's
probably rather small, but still, it would be nice if we could
let the compiler do the work at compile-time. And that's exactly
what this commit does, so now I have no excuse for trying to
manually write logical immediates anymore.
If a branch is unconditional, its target should not be in farcode,
since that defeats the purpose of farcode (putting seldom executed
code in farcode to keep it out of the icache when possible).
Fixes a 58698b8380 regression. (The EXCEPTION_EXTERNAL_INT
immediate being wrong meant that we never took the branch,
masking the problem of the MSR.EE immediate being wrong...)
In cases where we already know that there is an exception,
either because we just checked for it or because we were
the ones that generated the exception to begin with,
we can skip the branch inside WriteExceptionExit.
Unlike most constants we emit in JitArm64, these constants are
*not* inherent to the CPU we're emulating, and can have whatever
values we want. Let's handle them more robustly, in case we
decide to change their values in the future.
Public domain does not have an internationally agreed upon definition,
As such it's generally preferred to use an extremely liberal license,
which can explicitly list the rights granted by the copyright holder.
The CC0 license is the usual choice here.
This "relicensing" is done without hunting down copyright holders, since
it is presumed that their release of this work into the public domain
authorizes us to redistribute this code under any other license of our
choosing.
This code was part of Dolphin's relicensing from v2 to v2+ a while back,
we just never updated these copyright headers. I double-checked that
segher gave us permission to relicense this code to v2+ on 2015-05-16.
SPDX standardizes how source code conveys its copyright and licensing
information. See https://spdx.github.io/spdx-spec/1-rationale/ . SPDX
tags are adopted in many large projects, including things like the Linux
kernel.
This broke ejecting Wii discs while the game is running, as the drive state was set to Ready even when no disc was present, but other code still reported the missing disc, which confused games as you can't be both ready to read and have no disc. That would cause games to show an unrecoverable error screen, instead of a "please insert the game disc" screen.
This only affected Wii games; the GameCube games used regular disc reads which worked fine.
Performance optimization, along with making the code a little
neater. Saves us from performing a single -> double -> single
conversion when calling UpdateFPRFSingle.
If we already have to use a GPR, we might as well take advantage
of the nice immediate encodings provided by GPR ORR. This is
faster, smaller, and saves a register.
Some of the code used when the carry flag is known to be a
constant value is really not much better than just setting
the carry flag and then using the normal code, and with how
rarely this code runs, it isn't well tested either.
Might as well get rid of some of this code and simplify things.
These optimizations were already present, but only when d == a. They
also make sense when this condition does not hold.
- imm == 0
Before:
41 BB 00 00 00 00 mov r11d,0
45 2B DF sub r11d,r15d
After:
45 8B DF mov r11d,r15d
41 F7 DB neg r11d
- imm == -1
Before:
41 BD FF FF FF FF mov r13d,0FFFFFFFFh
44 2B EE sub r13d,esi
0F 93 45 68 setae byte ptr [rbp+68h]
After:
44 8B EE mov r13d,esi
41 F7 D5 not r13d
C6 45 68 01 mov byte ptr [rbp+68h],1
Without this, the code added in ac28b89 misbehaves and considers
AArch64 netplay clients to not have hardware FMA support, telling
all clients to disable FMA support, which causes a desync between
x64 and AArch64 due to JitArm64 not being able to disable FMA support.
Fixes a regression from 5.0-12066, where setting the GFXBackend variable
to one other than the current global backend would crash Dolphin upon
launching the game.
fcmpX only updates the FPCC bits, not the C bit.
This was already correctly implemented in the interpreter.
Not known to affect any games, but affects a hardware test.
This fixes bounding box shaders failing to compile under Vulkan, due to
differences between GLSL and HLSL in the return value of vector
comparisons and what types these functions accept. I included all() for
the sake of completeness.
At higher resolutions, our bounding box dimensions end up being
slightly larger than original hardware in some cases. This is not
necessarily wrong, it's just an artifact of rendering at a higher
resolution, due to bringing out detail that wouldn't have appeared on
original hardware. It causes a texel to fall partially on what would
have been a single pixel at native resolution, resulting in the
coordinates getting bumped up to the next valid value. In many cases,
these slightly larger bounding boxes are perfectly fine, as games don't
hard-code expected dimensions. It is problematic in Paper Mario TTYD
though, for a somewhat complicated reason.
Paper Mario TTYD frequently uses EFB copies to pre-render a bunch of
animation frames for a character sprite (especially in Chapter 2), so
that it can then render 100 or more of them without bringing the
GameCube to its knees. Based on my observation, the game seems to set
aside a region of memory to store these EFB copies. This region is
obviously fairly small, as the GameCube only has 24MB of RAM. There are
2 rooms in Chapter 2 where you fight a horde of as many as 100 Jabbies,
which are also rendered using EFB copies, so in this room the game ends
up making 130(!) EFB copies just for Puni and Jabbi sprites. This seems
to nearly fill the region of memory it set aside for them.
Unfortunately, our slightly larger bounding boxes at higher resolutions
results in overflowing this memory, causing very strange behavior. Some
EFB copies partially overlap game state, resulting in reading it as a
garbage RGB5A3 texture that constantly changes. Others apparently
somehow trigger a corner case in our persistent buffer mapping, causing
them to partially overwrite earlier EFB copies.
What this change does is only include the screen coordinates that align
with the equivalent native resolution pixel centers, which generally
results in the bounding boxes being more in line with original
hardware. It isn't perfect, but it's enough to fix Paper Mario TTYD's
Jabbi rooms by avoiding the buffer overflow. Notably, it is more
accurate at odd resolutions than at even resolutions. Native resolution
is completely unaffected by this change, as should be the case. This
change may also have a small positive impact on shader performance at
higher resolutions, as there will be less atomic operations performed.
Not doing this can cause desyncs when TASing. (I don't know
how common such desyncs would be, though. For games that
don't change rounding modes, they shouldn't be a problem.)
When I added the software FMA path in 2c38d64 and made us use
it when determinism is enabled, I was assuming that either the
performance impact of software FMA wouldn't be too large or CPUs
that were too old to have FMA instructions were too slow to run
Dolphin well anyway. This was wrong. To give an example, the
netplay performance went from 60 FPS to 30 FPS in one case.
This change makes netplay clients negotiate whether FMA should
be used. If all clients use an x64 CPU that supports FMA, or
AArch64, then FMA is enabled, and otherwise FMA is disabled.
In other words, we sacrifice accuracy if needed to avoid massive
slowdown, but not otherwise. When not using netplay, whether to
enable FMA is simply based on whether the host CPU supports it.
The only remaining case where the software FMA path gets used
under normal circumstances is when an input recording is created
on a CPU with FMA support and then played back on a CPU without.
This is not an especially common scenario (though it can happen),
and TASers are generally less picky about performance and more
picky about accuracy than other users anyway.
With this change, FMA desyncs are avoided between AArch64 and
modern x64 CPUs (unlike before 2c38d64), but we do get FMA
desyncs between AArch64 and old x64 CPUs (like before 2c38d64).
This desync can be avoided by adding a non-FMA path to JitArm64 as
an option, which I will wait with for another pull request so that
we can get the performance regression fixed as quickly as possible.
https://bugs.dolphin-emu.org/issues/12542
Back when I wrote this code, I believe I set it to use a custom path
so that the cache would end up in a directory which Android considers
to be a cache directory. But nowadays the directory which Dolphin's
C++ code considers to be the cache directory is such a directory,
so there's no longer any reason to override the default path.
this prevented some devices from being recreated correctly, as they were exclusive (e.g. DInput Joysticks)
This is achieved by calling Settings::ReleaseDevices(), which releases all the UI devices shared ptrs.
If we are the host (Qt) thread, DevicesChanged() is now called in line, to avoid devices being hanged onto by the UI.
For this, I had to add a method to check whether we are the Host Thread to Qt.
Avoid calling ControllerInterface::RefreshDevices() from the CPU thread if the emulation is running
and we manually refresh devices from Qt, as that is not necessary anymore.
Refactored the way IOWindow lists devices to make it clearer and hold onto disconnected devices.
There were so many issues with the previous code:
-Devices changes would not be reflected until the window was re-opened
-If there was no default device, it would fail to select the device at index 0
-It could have crashed if we had 0 devices
-The default device was not highlighted as such
This helps us keeping the most important devices (e.g. Mouse and Keyboard) on the top
of the list of devices (they still are on all OSes supported by dolphin
and to make hotplug devices like DSU appear at the bottom.
-Fix Add/Remove/Refresh device safety, devices could be added and removed at the same time, causing missing or duplicated devices (rare but possible)
-Fix other devices population race conditions in ControllerInterface
-Avoid re-creating all devices when dolphin is being shut down
-Avoid re-creating devices when the render window handle has changed (just the relevantr ones now)
-Avoid sending Devices Changed events if devices haven't actually changed
-Made most devices populations will be made async, to increase performance and avoid hanging the host or CPU thread on manual devices refresh
A "devices changed" callback could have ended up waiting on another thread that was also populating devices
and waiting on the previous thread to release the callbacks mutex.
Running the min/max operation on the upside down, quad-rounded pixel
coordinates before inverting them to the standard upper-left origin
produces wrong results. Therefore, we need to do the inversion before
rounding to pixel quads.
Fragment coordinates always have a 0.5 offset from a whole integer, as
that's where the pixel center is on modern GPUs. Therefore, we want to
always round the fragment coordinates down for bounding box
calculations. This also renders the pixel center offset useless, as 0.5
vs ~0.5833333 makes no difference when rounding down.
The SDK seems to write "default" bounding box values before every draw
(1023 0 1023 0 are the only values encountered so far, which happen to
be the extents allowed by the BP registers) to reset the registers for
comparison in the pixel engine, and presumably to detect whether GX has
updated the registers with real values. Handling these writes and
returning them on read when bounding box emulation is disabled or
unsupported, even without computing real values from rendering, seems
to prevent games from corrupting memory or crashing.
This obviously does not fix any effects that rely on bounding box
emulation, but having the game not clobber its own code/data or just
outright crash is a definite improvement.
-Reworked thread waits to never hang the Host thread for more than a really small time
(e.g. when disabling DSU its thread now closes almost immediately)
-Improve robustness when a large amount of devices are connected
-Add devices disconnection detection (they'd stay there forever until manually refreshed)
We also need to ensure the the CPU does not receive stale values
which have been updated by the GPU. Apparently the buffer here
is not coherent on NVIDIA drivers. Not sure if this is a driver
bug/spec violation or not, one would think that
glGetBufferSubData() would invalidate any caches as needed, but
this path is only used on NVIDIA anyway, so it's fine. A point
to note is that according to ARB_debug_report, it's moved from
video to host memory, which would explain why it needs the
cache invalidate.
This fixes rendering issues in Viewtiful Joe (https://bugs.dolphin-emu.org/issues/12525), but it is not entirely hardware accurate, as hardware testing showed other, more complex behavior in this case. However, it should be good enough for our purposes.
Looks like the option was added to the Wx UI at commit 198d3b69, which
was a few months after the advancedWidget was originally ported from
Wx to Qt, but before anyone was actually using Qt.
When determinism is enabled, we either want all CPUs to use FMA or
we want no CPUs to use FMA. Until now, Jit64 has been been doing
the latter. However, this is inaccurate behavior, all CPUs since
Haswell support FMA, and getting JitArm64 to match the exact
inaccurate rounding used by Jit64 would be a bit annoying. This
commit switches us over to using FMA on all CPUs when determinism
is enabled, with older CPUs calling the std::fma function.
MAX_XFB_WIDTH/HEIGHT are the largest XFB sizes seen in practice, but do not make sense to use for the backbuffer size, which should be the size of the window. The old code created screenshots with a size of 720x540 on NTSC games when "Dump Frames at Internal Resolution" is unchecked; now, the window size is used.
Adds a new PlatformID for universal builds. This will allow single architecture
builds to be updated through the single architecture path, and universal builds
to be updated with universal builds.
-add a way to reset their value (from the mappings UI)
-fix "memory leak" where they would never be cleaned,
one would be created every time you wrote a character after a "$"
-fix ability to create variables with an empty string by just writing "$" (+added error for it)
-Add $ operator to the UI operators list, to expose this functionality even more
This fixes a nasty issue where you can change the Dual Core setting
during emulation, if it has been overridden by GameINI or NetPlay, by
simply changing any of the non-disabled settings. This is because
changing any of the settings will write all of them to the config.
This issue is particularly nasty because managing to disable Dual Core
during emulation, and then stopping it, results in the emulator core
being totally deadlocked. It's impossible to recover from this state,
and Dolphin will remain as a zombie process on the system, consuming
resources and holding locks, until forcibly killed.
Added RAII wrapper around the the JITPageWriteEnableExecuteDisable() and
JITPageWriteDisableExecuteEnable() to make it so that it is harder to forget to
pair the calls in all code branches as suggested by leoetlino.
Removed the unavailable CPU core dialog box that asked users to change their
selected CPU core to one that is available. Instead, Dolphin now just overrides
the core to the default, and logs that it performed the override.
In MacOS 11.2 mprotect can no longer change the access protection settings of
pages that were previously marked as executable to anything but PROT_NONE. This
commit works around this new restriction by bypassing the mprotect based write
protection and instead relying on the write protection provided by MAP_JIT.
Analytics:
- Incorporated fix to allow the full set of analytics that was recommended by
spotlightishere
BuildMacOSUniversalBinary:
- The x86_64 slice for a universal binary is now built for 10.12
- The universal binary build script now can be configured though command line
options instead of modifying the script itself.
- os.system calls were replaced with equivalent subprocess calls
- Formatting was reworked to be more PEP 8 compliant
- The script was refactored to make it more modular
- The com.apple.security.cs.disable-library-validation entitlement was removed
Memory Management:
- Changed the JITPageWrite*Execute*() functions to incorporate support for
nesting
Other:
- Fixed several small lint errors
- Fixed doc and formatting mistakes
- Several small refactors to make things clearer
This commit adds support for compiling Dolphin for ARM on MacOS so that it can
run natively on the M1 processors without running through Rosseta2 emulation
providing a 30-50% performance speedup and less hitches from Rosseta2.
It consists of several key changes:
- Adding support for W^X allocation(MAP_JIT) for the ARM JIT
- Adding the machine context and config info to identify the M1 processor
- Additions to the build system and docs to support building universal binaries
- Adding code signing entitlements to access the MAP_JIT functionality
- Updating the MoltenVK libvulkan.dylib to a newer version with M1 support
Shouldn't have any behaviour change for regular usage as both masks are 32MB
by default.
But fixes theoretical buffer overrun when memory size override is used.
The interpreter implementation of fctiwx was treating rounding
mode 0 as "round to nearest, ties towards zero", which is not
an actual IEEE-754 rounding mode. The IBM document mentioned
in a comment at the top of the function, on the other hand,
treats rounding mode 0 as "round to nearest, ties to even",
which makes more sense.
This fixes one of JMC's console-recorded F-Zero GX replays on
JitArm64. (JitArm64 uses an interpreter fallback for fctiwx.)
The GC/Wii GPU rasterizes in 2x2 pixel groups, so bounding box values
will be rounded to the extents of these groups, rather than the exact
pixel. To account for this, we'll round the top/left down to even and
the bottom/right up to odd. I have verified that the values resulting
from this change exactly match a real Wii.
Any file which includes scmrev.h must be rebuilt when scmrev.h
is regenerated. By not including scmrev.h from any file other
than Version.cpp, incremental builds become a little faster.
When trying to do a small optimization in 8a0f5ea, I failed to
take into account that WeakFlush and FlushOne update m_query_count.
Only D3D11 and OGL had this problem, not D3D12 and Vulkan.
Sorry, the fix I made to the empty string in a29660a was not
actually sufficient, as DolphinQt will call tr on the string
regardless of whether it's marked with _trans. The proper fix
is to use nullptr, which DolphinQt has a special check for.
Sending an empty string to the translation system will not
result in getting an empty string back, but rather a description
of the currently loaded translations file. So empty strings
should not be marked as translatable.
Also adding some i18n comments and rewording a string I thought
was hard to understand.
casting a value to a u32 when it's originally an int, and it's exposed as int to users,
could end up in cases where a negative number would result as a positive one.
This doesn't really affect the value range of the attachment enum,
still I think the code was wrong.
Heavily tested.
Settings.SECTION_INI_ANDROID and Settings.SECTION_BINDINGS
both have the value "Android", but we only want the former
to be marked as being handled by the new config system.
This change fixes a problem where controller settings were
not being properly saved to Dolphin.ini.
The STL has everything we need nowadays.
I have tried to not alter any behavior or semantics with this
change wherever possible. In particular, WriteLow and WriteHigh
in CommandProcessor retain the ability to accidentally undo
another thread's write to the upper half or lower half
respectively. If that should be fixed, it should be done in a
separate commit for clarity. One thing did change: The places
where we were using += on a volatile variable (not an atomic
operation) are now using fetch_add (actually an atomic operation).
Tested with single core and dual core on x86-64 and AArch64.
NumericSettings support a max, so let's use it.
It might not do much now, but the max and min values will be used to give visual feeback
in the UI in one of my upcoming input PRs
The control expression editor allows line breaks, but the serialization was
losing anything after the first line break (/r /n).
Instead of opting to encode them and decode them on serialization
(which I tried but was not safe, as it would lose /n written in the string by users),
I opted to replace them with a space.
and replacing it with a ":" prefix. Also remove white spaces and \n \t \r.
bugfix: fix EmulatedController::GetStateLock() not being aquired when reading the
expression reference
bugfix: MappingButton::UpdateIndicator() calling State(0) on outputs, breaking ongoing
rumbles if a game was running
Improvement: make expressions previews appear in Italic if they failed to parse correctly
Previously we set the texture coordinate to zero, now we set
the texture coordinate *index* to zero. This fixes the ripple
effect of the Mario painting in Luigi's Mansion.
This change should have no behavioral differences itself, but allows for changing the behavior of out of bounds tex coord indices more easily in the next commit. Without this change, returning tex0 for out of bounds cases and then applying the fixed-point logic would use the wrong tex dimension info (tex0 with I_TEXDIMS[1] or such), which is inaccurate.
Previously we set the texture coordinate to zero, now we set
the texture coordinate *index* to zero. This fixes the ripple
effect of the Mario painting in Luigi's Mansion.
Previously we set the texture coordinate to zero, now we set
the texture coordinate *index* to zero. This fixes the ripple
effect of the Mario painting in Luigi's Mansion.
Co-authored-by: Pokechu22 <Pokechu022@gmail.com>
Since the description updating is tied to the selection changing on the detail list, and the detail list is recreated on each object change, behavior was somewhat broken. Clearing the list changed the current row to zero, but nothing else (particularly m_object_data_offsets) had been updated, so the description was not necessarily correct (this is easier to observe now since the vertex data is at the end, so it's easier to get different lengths of register updates). Furthermore, subsequent clears did not update the current row since there was no visible selection, so it only changed the description once. The current row is now always set to zero, which forces an update (and also scrolls the list back to the top). The presence of FRAME_ROLE and OBJECT_ROLE are also checked so that the description is cleared if no object is selected.
- Only one search result is generated per command/line, even if there are multiple matches in that line.
- Pressing enter on the edit field begins a search, just like clicking the begin button.
- The next and previous buttons are disabled until a search is begun.
- The search results are cleared when changing objects or frames.
- The previous button once again works (a regression from the previous commit), and the register updates and graphics data for the correct object are searched.
- currentRow() never returns -1, so checking that is unnecessary (and misleading).
- The 'Invalid search parameters (no object selected)' previously never showed up before because FRAME_ROLE is present if and only if OBJECT_ROLE is present.
This way, it can be focused with the render window behind it, instead of having the main window show up and cover the render window. This is useful for adjusting the object range, among other things.
If the number of objects varied, this would result in either missing objects on some frames, or too many objects on some frames; the latter case could cause crashes. Since it used the current frame to get the count, if the FIFO is started before the FIFO analyzer is opened, then the current frame is effectively random, making it hard to reproduce consistently.
This issue has existed since the FIFO analyzer was implemented for Qt.
The 'zero frames in the range' check can be removed because now there is always at least 1 frame; of course that might be the same frame over and over again, but that's still useful for e.g. Free Look (and the 1 frame repeating effect already occurred when frame count was exclusive).
A single object can be selected instead of 2 (it was already inclusive internally), and the maximum value is the highest number of objects in any frame (minus 1) to reduce jank when multiple frames are being played back.
Now that this is only called when playback actually starts (and not on unpausing), this change makes the experience a bit better (no more missing objects from not having reset the from object after changing FIFOs).
It is no longer relevant for the current set of loaders after 7030542546. If it becomes relevant again, a static function named IsUsable or IsCompatibleWithCurrentMachine or something would be a better approach.
By taking advantage of three-operand IMUL, we can eliminate a MOV
instruction. This is a small code size win. However, due to IMUL sign
extending the immediate value to 64 bits, we can only apply this when
the magic number's most significant bit is zero.
To ensure this can actually happen, we also minimize the magic number by
checking for trailing zeroes.
Example (Unsigned division by 18)
Before:
41 BE E4 38 8E E3 mov r14d,0E38E38E4h
4D 0F AF F5 imul r14,r13
49 C1 EE 24 shr r14,24h
After:
4D 69 F5 39 8E E3 38 imul r14,r13,38E38E39h
49 C1 EE 22 shr r14,22h
This isn't entirely necessary, as they are interpreted as barewords expressions,
but it's still nicer to have by default. And my upcoming input changes will
always put `` around single letter inputs.
-Add pause state to FPSCounter.
-Add ability to have more than one "OnStateChanged" callback in core.
-Add GetActualEmulationSpeed() to Core. Returns 1 by default. It's used by my input PRs.
The SaveToSYSCONF call in BootManager.cpp was unintentionally
overriding the temporary NAND set by the preceding
InitializeWiiRoot call. Fixes
https://bugs.dolphin-emu.org/issues/12500.
Verifying a Wii game creates an instance of IOS, and Dolphin
can't handle more than one instance of IOS at the same time.
Properly supporting it is probably more effort than it's worth.
Fixes https://bugs.dolphin-emu.org/issues/12494.
Avoids the need to copy the *.mo files manually *and* more importantly
this ensures that the mo files are always recreated if the build
output directory is cleared.
Update references was failing to update the references, causing input to stay nullptr and crashing.
I fixed the case that triggered that, though also added checks against nullptrs for safety.
(cherry picked from commit 4bdcf707555a5568eddff957fa3604975ffb6ed7)
I think the AArch64 JIT has come far enough that it doesn't have to
be called experimental anymore.
I'm also labeling the x86-64 JIT as x86-64 for consistence with the
AArch64 JIT. This will especially be helpful if we start supporting
AArch64 on macOS, as AArch64 macOS can run both the x86-64 JIT and
the AArch64 JIT depending on whether you enable Rosetta 2.
I haven't observed this breaking any game, but it didn't match
the behavior of the interpreter as far as I could tell from
reading the code, in that denormals weren't being flushed.
If we can prove that FCVT will provide a correct conversion,
we can use FCVT. This makes the common case a bit faster
and the less likely cases (unfortunately including zero,
which FCVT actually can convert correctly) a bit slower.
Preparation for following commits.
This commit intentionally doesn't touch paired stores,
since paired stores are supposed to flush to zero.
(Consistent with Jit64.)
This simplifies some of the following commits. It does require
an extra register, but hey, we have 32 of them.
Something I think would be nice to add to the register cache
in the future is the ability to keep both the single and double
version of a guest register in two different host registers
when that is useful. That way, the extra register we write to
here can be read by a later instruction, saving us from
having to perform the same conversion again.
Fixes https://bugs.dolphin-emu.org/issues/12388. Might also fix
other games that have problems with float/paired instructions
in JitArm64, but I haven't tested any.
-They might have never drawn if DrawMessages wasn't called before they actually expired
-Their fade was wrong if the duration of the message was less than the fade time
This makes them much more useful for debugging, I know there might be other means
of debugging like logs and imgui, but this was the simplest so that's what I used.
If you want to print the same message every frame, but with a slightly different value
to see the changes, it now work.
To compensate for the fact that they are now always rendered once,
so on start up a lot of old messages (printed while the emulation was off) could show up,
I've added a "drop" time, which means if a msg isn't rendered for the first
time within that time, it will be dropped and never rendered.
When the interpreter writes to a discarded register, its type
must be changed so that it is no longer considered discarded.
Fixes a 62ce1c7 regression.
We normally check for division by zero to know if we should set the
destination register to zero with a XOR. However, when the divisor and
destination registers are the same the explicit zeroing can be omitted.
In addition, some of the surrounding branching can be simplified as
well.
Before:
45 85 FF test r15d,r15d
75 05 jne normal_path
45 33 FF xor r15d,r15d
EB 0C jmp done
normal_path:
B8 5A 00 00 00 mov eax,5Ah
99 cdq
41 F7 FF idiv eax,r15d
44 8B F8 mov r15d,eax
done:
After:
45 85 FF test r15d,r15d
74 0C je done
B8 5A 00 00 00 mov eax,5Ah
99 cdq
41 F7 FF idiv eax,r15d
44 8B F8 mov r15d,eax
done:
Bonta