after some test the more relevant parameters were the color samples and the tlut max size.
so delete the rest of the parameters and define 3 modes:
Safe : the two values are set to 0 meaning all the texture data and all the tlut data are hashed this is the most correct and slowwwwwwwwwww way
Normal: 37 samples are taken from the color textures an the firs 4096 bytes of the tlut are hashed, is a lot faster than safe mode but in some games i observe small glitches.
Fast: 8 samples are taken from the color textures an the first 1024 bytes are hashed from the tlut, is a little slower than the unsafe cache but at least all the games i tested have correct text output and fast frame rate. the glitches in dinamyc color textures are more noticeable in this mode
this values could be improved, if you find a better combination please post it and the game it fixes and i will update the source.
for the moment, as my time is limited by a lot of work, only implemented the d3d gui, if someone can implement the opengl gui will be a lot of help for me.
please test a lot and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5135 8ced0084-cf51-0410-be5f-012b33b47a6e
Enabled the fix on Linux x64.
Aligned the stack before calling the LoadStorePaired asm functions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5122 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed a misbehavior in the clear code that causes depth clear problems in reference hardware (Intel as example).
add 6 parameters to optimize Safe Texture Cache:
SafeTextureCacheColorSamples, SafeTextureCacheIndexedSamples, SafeTextureCacheTlutSamples:
this 3 parameters gives the number of samples taken to calculate the final hash value, less samples = more speed, more samples = more accuracy
if 0 is specified the hash is calculated using all the data in the texture.
SafeTextureCacheColorMaxSize, SafeTextureCacheIndexedMaxSize, SafeTextureCacheTlutMaxSize:
this parameters limits the amount of data used for the hash calculation, it could appear as redundant but in some games is better to make a full hash of the first bytes instead of some samples of all the texture.
color, indexed, tlut : define the texture type, full color data, indexed, and the tlut memory.
the parameters are available in the config , no GUI at this time, if the test are OK will add it to the GUI.
if someone needs it will give more examples on how to configure the values for specific games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5116 8ced0084-cf51-0410-be5f-012b33b47a6e
GBAConnectionWaiter should take less cpu time, be threadsafe, and exit properly.
thanks to sl1nk3 and skidau
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5112 8ced0084-cf51-0410-be5f-012b33b47a6e
Works-for-me(TM), please test if I missed anything. All values should be initialized with the default values from either configuration or datatype.
Fixes Issue 2334
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5094 8ced0084-cf51-0410-be5f-012b33b47a6e
SysConf: removed the Save call in the dtor, this crashes on linux trying to read m_Filename (which might be already freed).
Common: set eol-style native, again.
Fixes Issue 2332
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5082 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed X event loops from GCPad and Wiimote plugins, and implemented an asynchronous check for keyboard and mouse buttons.
Also added an X event loop in core that handles events while the emulator is paused. Prevents unexpected behavior from events that occur while the emulator is paused.
Now there is only one event loop running at a time (besides those hidden in SDL).
I will revert this commit if other devs are unhappy with it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5048 8ced0084-cf51-0410-be5f-012b33b47a6e
sorry to tell but this will bring a speed drop, so let you decide if this change stay or not.( used the fastest open source hash algorithm i know)
do not apply full hashing to other format because it kills the performance.
for popular request added 9x SSAA believe me will kill your graphic card even if is the best but the image quality is exceptional.
as always please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5034 8ced0084-cf51-0410-be5f-012b33b47a6e
implement proper window handling (d3d/sw) which i believe fixes a hang that occurs when a game is stopped (plz test this :)) + some minor stuff
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5030 8ced0084-cf51-0410-be5f-012b33b47a6e
emulator. Also added the ability to close the emulator with the escape key.
Fixed an issue that caused a segmentation fault when trying to close the
emulator when running in fullscreen mode, which can also be done using the
escape key. This makes fullscreen mode useable in linux!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5023 8ced0084-cf51-0410-be5f-012b33b47a6e
Bit of cleanup/grouping, control creation is now a bit more separate from value setting and tooltip assignment which IMO cluttered the code as it was.
Removed something from main.cpp that looked like a hack to me.
Fixes Issue 2229
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5021 8ced0084-cf51-0410-be5f-012b33b47a6e
linux. This could confuse users, as it does nothing in linux. Mouse hiding is
set from the GL video plugin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5008 8ced0084-cf51-0410-be5f-012b33b47a6e
chage the global format of the screenshots to bmp, is correctly supported by both plugins and is faster.
reverted the changes in safe texture cache, will try to make them more stable then commit them, this should fix compilation in linux and macand error introduced in MP games
corrected all the issues commented by ector, thanks for the comments alway is good that the code is revised by others to find missed spots.
please report any remaining issue to solve them.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5001 8ced0084-cf51-0410-be5f-012b33b47a6e
first fixed scaling when updating backbuffer to make it friendly with encoders, now frame dumping must work without errors in any codec.
clean screenshot and frame dumping code now is more correct, faster and stable.
improve safe texture cache, improving the distribution of the hash algorithm, including tlut hash in the final hash of the texture, and making use of a 64 bit hash to make it more accurate.
clean a lot of code and corrected some missused vertex formats when drawing full screen quads.
and biggest change last:
implemented pseudo antialiasing: a image post-process algorithm that mimics antialiazing and is fare more easier to implement in this scenario.
you can change the intensity of the effect changing the values of the antialiasing combo. the right value depends on the game.
for example mkwii looks awesome with 8x.
please try all the changes and let me know the results.
if something is broken, please let me know and will fix it asap.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5000 8ced0084-cf51-0410-be5f-012b33b47a6e
Basic usage: "sudo scons install=global install"
Hopefully this doesn't break builds on Macs. I have tested this on linux and windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4994 8ced0084-cf51-0410-be5f-012b33b47a6e
Update issue 2097
Summary: Linux segfault with LoadStorePaired enabled
Disabling LoadStorePaired might affect performance just as Sonics change in r4897 does with OSX.
Leaving this issue open since this is not a fix, just a workaround; this and Issue 2053 might suffer from some problem with Paired instructions altogether.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4993 8ced0084-cf51-0410-be5f-012b33b47a6e
This fixes some flickering and resizing stuff when using Render-to-main, where the GameListCtrl would not be hidden (and show over the rendering surface)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4986 8ced0084-cf51-0410-be5f-012b33b47a6e
e.g. When last time you closed Dolphin on a second monitor but now you have ejected that monitor or have changed the position from horizontal tile to vertical tile.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4957 8ced0084-cf51-0410-be5f-012b33b47a6e
Enable the thread by adding this line to the video plugin ini files, "User\Config\gfx_dx9.ini" and "User\Config\gfx_opengl.ini":
UseFIFOThread = True
The line should be added under the UseXFB line.
To disable the FIFO thread, use this line:
UseFIFOThread = False
If the line is not in the ini file, the default is disabled (i.e. False).
The FIFO thread causes an error when the OpenGL plugin is used. The D3D plugin works.
Only top left quarter of the screen can be seen when rendering to main window. The entire screen can be viewed when running in a window.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4930 8ced0084-cf51-0410-be5f-012b33b47a6e
Center DX9 window
Bring Wiimote reconnect confirm dialog to topmost, now only works with OpenGL.
(It seems DX9 in full screen doesn't like other windows overlapped upon it.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4895 8ced0084-cf51-0410-be5f-012b33b47a6e
Advantages:
* Less confusion for users
* No need to build twice to make sure you didn't break something
* Easier to switch between the cores for testing
Disadvantages:
* None, as far as I can tell :) Maybe some extra code complexity, but not much.
Also break some include chains that caused <windows.h> to get included into everything, slowing down the build on Windows. There's more to do here though, there's still a lot of files that get it included that don't need it at all.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4891 8ced0084-cf51-0410-be5f-012b33b47a6e
in opengl correct an error introduced by mi in efb to ram alignment, it's seems to fix SMS but it missalign a lot of other games, so revert to the default. must solve truncated coins in NSMB.
revert alpha testing values to the values in rev 4812 as they fix some games.
in d3d dynamized the Render target size so it will change at runtime when viewport exceed it size, in the worse case it will cause a missing frame when resizing but in the games I tested is not noticeable at all
This must solve all the remaining viewports problems in nvidia cards, in ati this is not needed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4888 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed log window docking
* Fixed multi-selection in the game list
* Fixed last filename selection. Dolphin remembers the last game/elf/file that you loaded and will load that if you press the Play button without a default ISO selected and without selecting anything from the game list.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4887 8ced0084-cf51-0410-be5f-012b33b47a6e
Note that running in debug mode (Dolphin.exe -d) still maximizes the window and stores that size aswell.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4879 8ced0084-cf51-0410-be5f-012b33b47a6e
* Made the debugger toolbar height match the other toolbars.
* Centered the disasm on the current instruction
* Allow one click view of the JIT'd code
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4878 8ced0084-cf51-0410-be5f-012b33b47a6e
The algorithm and lookup table are 99% accurate which is far better than the approximation that Dolphin had previously.
The frsqrte instruction is used for a lot of 3D graphics functions so this change may help fix graphics glitches.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4864 8ced0084-cf51-0410-be5f-012b33b47a6e
SD_IV should not be global, thanks to interdpth as I was only testing with one save before
remove duplicated code from BannerLoaderWii.cpp
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4863 8ced0084-cf51-0410-be5f-012b33b47a6e
* must use a truncating float-to-int conversion, for example.
* introduce optimized variants of the single value psq_st operation (JIT only).
* fix bug in SafeWriteRegToReg when swap = false
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4861 8ced0084-cf51-0410-be5f-012b33b47a6e
in videocommon little fix for the alpha test values, return to the original values as they are more accurate.
in D3D:
huge change in state management, now all the state management is centralized and redundant state changes are eliminated.
Fixed the overlapped viewport error in non ati cards:
the error was caused by this: when a viewport is defined larger than the current rendertarget, an error is thrown and the last valid viewport is used, this is the reference behavior, in ati cards if a larger viewport is defined, no eror is returned, the rendering is valid and is rendered using the projection defined by the viewport but limited to the rendertarget are, exactly like opengl or the GC hardware.
to solve this in reference drivers defined a large rendertarget (2x the size of the original) and proceed to render in a centered quad insithe the larger rendertarget, in this way larger viewports always falls inside a valid rendertarget size, the drawback of this is the waste of resources. it can be dynamized, depending or games or changed at runtime when a oversized viewport is detected, but i live that to future commits.
please test this and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4841 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added BAT algorithm
* Page Address translation algorithm is now used in all games
* Added TLB cache
* Temporarily forced JITIL to use the slow memory access for Win32 when playing tlbhack games.
F-ZERO GX is now playable. It works only on JITIL in the 32bit version. It works in both JIT and JITIL on x64.
The MMU code may fix other games that are crashing.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4839 8ced0084-cf51-0410-be5f-012b33b47a6e
use at your own risk as it has been tested only to the point that a real wii recognizes the save on an sd card
Please post test results here or on issue 1945
removed the automated backup when importing from a save.bin
fixed display of pokemon titles in memcardmanager
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4829 8ced0084-cf51-0410-be5f-012b33b47a6e
addis, cmpis, xori operate on ACx.M instead of ACCx
addax, subax, movax use whole AXx reg, not just AXx.L
addpaxz uses whole AXx instead of AXx.H
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4817 8ced0084-cf51-0410-be5f-012b33b47a6e
if it hangs on stop now please report so we can fix it.
2. Change linux to use the same threading module in single core mode as windows
Anyone knows which revision broke dual core mode on linux?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4803 8ced0084-cf51-0410-be5f-012b33b47a6e
Change some PanicYesNo to AskYesNo so that they will always show (WiiSaveCrypted.cpp)
Adds more country filtering options to Gamelist (france, italy, korea, taiwan, and unknown country)
Misc. fixes for potential crashes that can only occur with a corrupted dump == check filesize of a dump before spending time looking for the cause of a crash :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4802 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed the panic alert about HCI_CMD_INQUIRY because it doesn't crash Dolphin or anything like that...
It's called from MiiChannel, when you try to upload your Miis to a WiiMote.
And it works just fine! (except for the warning "Can't find Wiimote by bd: xx:xx:xx:xx:xx:xx", which is really odd)...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4800 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Fixed a bug (for Win 32bit) that reports "No possible memory base pointer found!" even when there IS valid memory base found.
3. Made Metroid Prime 2 (maybe also other games) boot
PS: There is definitely some initialization problem with Dolphin (not found exact location yet), which prevents Metroid Prime 2 from first time booting (If you boot some other GC game first, stop it, then MP2 can boot without problem).
So I added an instant BP hack that can make MP2 boot even at first time.
And I've tested all my games to guarantee it won't break any game that already boots before this hack.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4795 8ced0084-cf51-0410-be5f-012b33b47a6e
Also makes VPS visible as sl1nk3 suggested, so that it won't confuse people with a wrong percentage of speed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4791 8ced0084-cf51-0410-be5f-012b33b47a6e
Now the frame limiter yields on CPU thread, not as before on GPU thread mistakenly
2. Fixed clear of VI interrupts
I guess VI interrupts are not used at all, because they were never cleared before
3. Made GPU thread 0% processor usage when paused whatever your active config is.
I tried the event approach but somehow the thread resume latency is excessively long (Who can tell me why?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4790 8ced0084-cf51-0410-be5f-012b33b47a6e
All you gotta do is Pause the emulation! That's useful for when your batteries run out during gameplay, for example...
But if you change the WiiMote source (between Emulated, Real or Inactive) you must disconnect and reconnect (Menu Tools -> Connect WiiMote) the WiiMotes affected by the change...
Thanks to jack.fr0st who did all the emulation state notification work!
Now every plugin has a way to know the current emulation state (paused, stopped or playing)
@ayuanx: I thought about doing a PostMessage(g_WiimoteInitialize.hWnd, WM_USER, WIIMOTE_DISCONNECT, current_number); so that the user gets asked to reconnect that WiiMote, trying to avoid having to disconnect and reconnect, but it didn't work because shooting that message only asks to reconnect, doesn't do a disconnect... Do you have any ideas on how to accomplish that?
Also, if anyone could check if Issue 1916 is finally fixed... Or at least when is the cursor being hidden or not...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4789 8ced0084-cf51-0410-be5f-012b33b47a6e
so far only tested with NSMB save (which works)
!!backup any existing save before importing save for the same game!!
also adds VS files and folders to the ignore list
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4784 8ced0084-cf51-0410-be5f-012b33b47a6e
JitBlockCache::GetCompiledCodeFromBlock() now casts the correct pointer, which allows the PPC <-> x86 translated code viewer to work.
Fixes issue 1935.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4781 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed Issue 1917
(Since wxWidgets is not allowed in core, so I moved the popup window to CFrame)
*Maybe* this could also fix Issue 1919?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4780 8ced0084-cf51-0410-be5f-012b33b47a6e
"VideoFifo_CheckEFBAccess()" & "VideoFifo_CheckSwapRequest()" should be moved to a more suitable place than inside function "Fifo_EnterLoop()", which wastes considerable amount of CPU time (exhausting one core completely even when paused) and also makes VPS inaccurate.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4778 8ced0084-cf51-0410-be5f-012b33b47a6e
This also fixed Ikaruga, not sure whether it could fix Metriod Prime. If not, how about disabling EFB copy?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4777 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes the log line a bit too long in my taste so if anyone got
an idea of how to make it look nicer i.e making it optional or adding it only to errors/warnings
do share
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4776 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Fixed Issue 1909
Multi-Nunchuck control problem
3. Updated SYSCONF, which should enable games that require MotionPlus, such as "Wii Sports Resort"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4773 8ced0084-cf51-0410-be5f-012b33b47a6e
Unbreak linux stop on Single Core, remove an unnecessary wait event, fix DSP HLE/DSP LLE/OGL plugin hang on stop when the config dialog has been opened (nJoy and Wiimote still need to be fixed), avoid the CpuThread to be stuck in the efb/swap loop by setting a flag before the thread is actually shutdown (contrary to r4756 which was setting it.. after :D)
Clear the status bar Framerate/Core message when the game is stopped.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4769 8ced0084-cf51-0410-be5f-012b33b47a6e
Only downside: You can't change between Real and Emulated WiiMotes while the game is running anymore... This is due to the way the Real WiiMotes are assigned to the slots...
I've tested it with 2 real WiiMotes, but I can't see why it wouldn't work with 4!
Also, you can assign Real or Emulated WiiMotes to any one of the four slots that it will be respected!
Happy New Year everybody!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4765 8ced0084-cf51-0410-be5f-012b33b47a6e
- It's worth noticing that both in OGL and D3D the Config options for Always and Auto Hide Cursor have no effect. I can't get (read) those values in D3DBase.cpp ...
* Some more key bindings
* Removes duplicate ifdef _Win32 from VKToString
* Made VKToString a little faster (smarter) (but don't expect any speedups though...)
* Corrects Pal60 name in Config (it was Pal6)
I'm still trying to figure out why the Toggle Fullscreen Button doesn't work...
Also I really thought about commiting my changes to Wiimote_real, which are tested and working for 1 real wiimote, but I need someone to test them with more than one real wiimote (I only have one)... See Issue 1876 ...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4757 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Connect/Disconnect Wiimote on the fly, no need to pause game
PS: Toggling full screen by ESC in DX9 doesn't work yet, it will close Dolphin instead at the time.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4754 8ced0084-cf51-0410-be5f-012b33b47a6e
And I'm afraid there are even more wxString::FromAscii() :(, hopefully they don't need to be displayed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4748 8ced0084-cf51-0410-be5f-012b33b47a6e
Wii games now show their description in the gamelist instead of the company (= always "N/A"), fix SJIS handling using wxString code instead of Win32 code, fixes some broken characters in the gamelist and ISOProperties.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4740 8ced0084-cf51-0410-be5f-012b33b47a6e
* You can connect/disconnect one or more WiiMote from Menu->Tools any time (must pause game first)
* Up to 4 Emulated Wiimotes can work together at the same timer
(PS: "Wiimote_Real" needs to be rewritten to support Multi-WiiMote, and it could be broken already now)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4736 8ced0084-cf51-0410-be5f-012b33b47a6e
This fixes on WiiMote Button Mapping:
Num /
Num *
Num Decimal
Num Separator
Num Lock
Right Alt -> But on keyboards that have "Alt Gr" keys it still gonnal report it as Left Ctrl, because when you press it, the OS sends a Left Ctrl then a Alt key...
Also fixes on SimplePad Button Mapping:
Num Decimal
Num Separator
Num Enter
Num Lock
Right Shift
Right Ctrl
Right Alt
Also it now differs Left (Ctrl|Shift|Alt) from the Right ones...
All keys should be working now... I left "Print Scrn" and "Pause" out because I don't think those can (or should) be bound...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4735 8ced0084-cf51-0410-be5f-012b33b47a6e
Show the correct name for the HOME key when pressed on Button Mapping dialog. (It was displaying "Num 7" when you pressed the Home button (the one above "End")).
Yeah, I know, it really is a silly fix... But hey, it's still a fix! =P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4734 8ced0084-cf51-0410-be5f-012b33b47a6e
. Performance boost
(Completely non-blocking between Sound thread and CPU thread, in the meantime keeping them thread safe)
. Both 32KHz & 48KHz sound can be handled properly now
(But up-sampling is still not implemented, and I don't think any game requires it.)
. Strategy adjustment
When your PC is *NOT* capable to run the game at 100%:
>> DSound Could yield more fluent sound than OpenAL sometimes, but you will lose the sync between video & audio (since audio is played before video to guarantee fluency)
>> OpenAL Ensures video & audio are always sync'ed, but sound could be intermittent(to let slow video catch up)
. Changed default frame limit to: Auto
(Somehow this can dramatically decrease the chance of wiimote desync in game NSMB)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4724 8ced0084-cf51-0410-be5f-012b33b47a6e
* ble involving CR flags was branching the wrong way around.
* xorx now works when sent the same register for both the src and dest
* lbzu disabled (same as JIT) fixing a Dolphin crash
* JITIL provided with the memory exception handler fixing crashes when memory is read out of bounds.
These fixes are able to get F-Zero GX in-game when JIT FloatingPoint is disabled. Once in-game, F-Zero retires the player just like it does in JIT.
This change might fix Dolphin crashes involving JITIL in other games too.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4723 8ced0084-cf51-0410-be5f-012b33b47a6e
. Fixed Sample Rate for DSP
(Now if your CPU is capable to run game at 100%, you will get pure sound without buzz or static noise)
. Fixed Sample Rate for AI
(Now if your CPU is capable to run game at 100%, you will get sync'ed video and audio)
. Fixed Backend list for DSPLLE
. Improved Aduio DMA a bit
(There might be a completely redesign in following phases)
WARNING: The whole rework will take time to complete.
This commit is compilable, but could be unstable.
So you can try it and test it but don't take it as a release rev!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4717 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add an option to enable the EFB scaled copy *TODO find a better place for it to go.
SOIL - Update stb_image to the latest version (1.16 to 1.18)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4716 8ced0084-cf51-0410-be5f-012b33b47a6e
donkopunchstania