Now it only writes back dirty registers when flushed
* Fixed KillImmediate
* Renamed LoadToX64 and StoreFromX64 to BindToRegister and StoreFromRegister respectively (as suggested by ector)
* Code cleanup in calls to the reg allocator
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6053 8ced0084-cf51-0410-be5f-012b33b47a6e
* Some fixes to linear interpolation
* Adds interpolation to ADPCM samples
* Relaxed a volume limit in ADPCM_Vol
Fixed:
- Frac rolls over one iteration before samplePos advances. Can introduce noise similar to flipping samples (1234 => 1214). Introduced oldFrac to fix this. This isn't as noticeable as it probably should be because of below.
- When samplePos doesn't advance it interpolates between two copies of the same sample which actually does nothing. Changed it to always use the current and next sample.
- When frac is 0 you should get 100% of yn2 instead of ~99% added a +yn2 to balance it.
Other changes:
- Added linear interpolation for ADPCM. Sounds like a good idea.
- Set ADPCM_Vol to clamp to x8000 instead of x4e20. Some games will play some sounds at x8000 volume anyways since the volume is applied before this. Lower limit can result in quiet music (x4e20) but some loud ambient sounds (0x8000).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6041 8ced0084-cf51-0410-be5f-012b33b47a6e
Made it so that Source/Core/DolphinWX/Globals.h is only used for the wxWidgets build, and a little other file inclusion clean up.
Fix an issue where a user runs a game from the open menu or toolbar items with a clean user directory, and henceforth double clicking on the empty game list (where it says double click to browse for games), that game is run again.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6037 8ced0084-cf51-0410-be5f-012b33b47a6e
platforms as well. It would seem that ABI_PARAMx will have to be
used more consistently elsewhere to match up with a change to use
them here.
Not sure yet why I still need the final section of Jit64::stX.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6035 8ced0084-cf51-0410-be5f-012b33b47a6e
* Un-cleaned the Load/Store code. I think this will fix the stability issues from r6032
* Added memory exception checking to a couple more JIT FPU instructions
* Optimised the 64bit fast memory access slightly
* Optimised the MMU speed hack.
The rest of the speed optimisations from r6032 have been retained.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6034 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix modality for the config dialogs on windows.
Fix the compress/decompress dialog wxString issues for MacOSX (hopefully).
Fix the DSP-LLE debugger for linux.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6031 8ced0084-cf51-0410-be5f-012b33b47a6e
had SSE3. Keep -msse2 on other platforms. Not sure if there are actually
any Dolphin-capable machines out there without SSE3, but..
Use -search_paths_first to give our statically linked libraries precedence
over /usr/local/lib.
Some work-in-progress changes to facilitate a more easily redistributable
application bundle on OS X.
Group compiler/preprocessor/linker flags together to make the full set
more intuitively apparent.
The various libraries in Externals have rather inconsistent conventions
for include paths. Best to encapsulate that knowledge in foo/SConscript.
Re-use utils.GenerateRevFile for all three places in the build system
where we need the SVN revision number.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6030 8ced0084-cf51-0410-be5f-012b33b47a6e
The GCC model for extended instructions like these is that you compile
with -msse3 etc. These affect code generation for whole compilation units,
so the idea is that you have a separate .c file for each instruction set
class and then indirect to the desired one at runtime.
Without e.g. -msse4.1, the GCC built-ins used by <foointrin.h> are not
available. However, in our specific case of compiling with -msse2 and
wanting to use SSE3.1 code, enough built-ins are available that we only
need to provide a little hack for pshufb.
Upgrading this to also use SSE4.1 instructions doesn't appear feasible
without a lot of undesirable duplication of GCC built-in functions and
headers, so we'd probably have to move to the GCC model of separate
source files for that.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6014 8ced0084-cf51-0410-be5f-012b33b47a6e
This one needs a lot of testing, since I don't have any games that need it, except Rogue Leader (GSWP64) - and I didn't do more "testing" than watching the stormtroopers dance due to speed reasons (altho it seems twice as fast as JIT for me; it does spit out a lot more warnings too)
btw, ITS OVER 6000!!111
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6006 8ced0084-cf51-0410-be5f-012b33b47a6e
is required to correctly link with C++ libraries like wxw.
Tell OS X that the user is doing something when using the wiimote
so that the screensaver doesn't come on when playing a Wii game.
Replace unnecessary floating point with integer math.
Remove unnecessary <sys/stat.h>'s.
Correct a few type nits.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5995 8ced0084-cf51-0410-be5f-012b33b47a6e
* Emulated correct behaviour of DSI and ISI exceptions
* Added memory exception checks
* Added fast TLB cache implementation (written by booto)
* Added "Enable MMU" option in the game properties
* Renamed old TLBHack to "MMU speed hack"
Thanks to booto (PowerPC) and nash (testing) who spent many weeks of their time helping me make this work. Also thanks to shuffle2 for finding and converting the map file of the original target.
There are two options for MMU emulation found under the game properties. "Enable MMU" is the accurate emulation option. "MMU speed hack" is the old TLBHack renamed. Most games will work with one or the other. Some games can work with both options ticked.
Only the JIT recompiler and Interpreter work with the MMU code. JITIL is not supported (too hard for me to add).
The speed optimised code still needs a lot more work and is disabled for now.
Fixes issue 2546
Fixes issue 2583
Fixes issue 2704
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5994 8ced0084-cf51-0410-be5f-012b33b47a6e
* Code cleanup
* Reduce the cost of RFI instruction (heavily used on PowerPC)
* Implement missing cases in bclrx
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5991 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix an issue that prevented the code window settings from taking effect on application start. (Thanks shuffle2, skid_au, and sanchez).
Fix a potential segmentation fault with the DSP-LLE debugger window.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5988 8ced0084-cf51-0410-be5f-012b33b47a6e
This is EXPERIMENTAL, in theory don't break any game but if so Revert this commit immediately please.
Note: Beside Eternal Darkness needs DirectX 11 or DirectX 9 with Zelda Hack to works fine.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5986 8ced0084-cf51-0410-be5f-012b33b47a6e
Also refresh the log window at that time so artifacts are cleared.
A little more code cleanup of the debugger windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5983 8ced0084-cf51-0410-be5f-012b33b47a6e
PowerPC needs 2 instructions to load a 32-bits immediate value in a register (lis + addi; lis + ori). We can merge both instructions into a single SetImmediate().
This commit shares code with r5799, so to prevent another flame war on OSX vs Windows, I added #ifdef around the "bad" lines...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5982 8ced0084-cf51-0410-be5f-012b33b47a6e
Added a default perspective for the debugger.
Save all perspectives, and not just the active one.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5979 8ced0084-cf51-0410-be5f-012b33b47a6e
* Merge some loops in PPCAnalyst::Flatten()
* Put ppcState.cr and ppcState.cr_fast[] into a single C++ union. This allows quick access to the whole CR register without needing to merge the cr_fast array. The implemented solution assumes the host system is little-endian, but it seems to be already assumed in many places in the code...
* Inline the call to computeCR: it now costs a few more memory bytes per JITed instruction but it removes the CPU overhead of the CALL. This allowed to remove some unneeded MOV as well.
* Jit64::GenerateCarry() don't need a temporary register anymore
* Fix what seems to be a bug in PowerPC instruction RFI: the wrong bit was cleared in MSR
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5970 8ced0084-cf51-0410-be5f-012b33b47a6e
Don't rely on trailing /'s in directory names.
Destdir only works for global builds.
Only tar up global builds if they are in a destdir to
avoid SCons eating all available memory indexing /usr.
Print current status of shared_foo in 'scons -h'.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5966 8ced0084-cf51-0410-be5f-012b33b47a6e
The new default wiiuse wiimote read timeout of 30ms has been overridden previously by the default 10ms from the wiimoteplugin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5965 8ced0084-cf51-0410-be5f-012b33b47a6e
Of course, this doesn't do much good without another shader compiler..
WIP of OS X application bundle building.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5961 8ced0084-cf51-0410-be5f-012b33b47a6e
wxFileSelectorDefaultWildcardStr had been copy-pasted and
changed to use specific filetypes had retained the extranous
format arguments to wxString::Format.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5957 8ced0084-cf51-0410-be5f-012b33b47a6e
autoconfiguration tests. Some versions of gcc care enough about ANSI C
to complain about this.
Use the Linux install hierarchy conventions on other Unices as well.
XKeysymToString returns NULL on unknown keysyms, which is not a valid
std::string initializer.
There appears to be some disagreement regarding the second parameter
to iconv(). Some versions/installations have it as const, others don't.
Unfortunately, due to wonderful C++ brain damage, implicit conversion
from const to non-const doesn't work here.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5945 8ced0084-cf51-0410-be5f-012b33b47a6e
- More removal of unnecessary code
- Windows: Modification of Wiiuse_Find under windows,
instead of always deleting and recreating the whole wiimote_t struct, we do maintain the old one,
adding/removing new wiimotes to/from it
- some wiimote bugfixes, see below for details
Windows related stuff:
Fixed most of the disconnection issues (single and mulitple real wiimotes, both wiimote plugins) (I haven't had a disconnect msg in hours anymore(ms stack)).
Rumble bug should be fixed now(both plugins,pls verify).
Fixed some pair up issues( sometimes you had to press the pair up button up to 3 times, till it paired up your wiimote).
More dongles might be now supported via ms stack, pls try and report back!
Fixed a problem where multiple wiimotes would swap slots on pair-up/addition of a real wiimote (2-4 real wiimotes) (both plugins, but not integrated into new plugin).
Improved ingame auto-pairup for real wiimotes(thx to the new wiiuse_find routine).
Fixed a bug on setting wiimote timeouts, which means changing the timeout was just a dummy earlier.
Most of the stuff concerns stuff in the old wiimote plugin, dont worry, in the end it's important for both plugins. It will get ported to the new plugin sooner or later.:')
Some minor stuff.
This might break osx/linux build and maybe the new plugin realwiimote-wise only. Thx to glennrics to pointing me to some breakings on linux, I didn't fix them all.
PS I hope i haven't forgotten anything, enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5940 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a DSPCORE_STOP state. The DSP-LLE debugger window segmentation faults if it is openned when a game is not running.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5931 8ced0084-cf51-0410-be5f-012b33b47a6e
Should revisit and make the distinction more explicit.
Put the Data and Sys directories under Resources in the OS X app bundle.
Construct config.h (now lower-case to avoid confusion with other Config.h
instances in the tree) in the root. One tiny step towards a read-only
and cross-buildable source tree.
Some minor bits of non-Linux Unix portability.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5921 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
To change it, right click the affected game in the iso list, select Properties, and enter some constant for "Watermark tightness". Reasonable values range from 20 to 200.
FIFO seems unoverflowable on my computer no matter what I set this value to, so test whether tuning the value helps you ;P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5907 8ced0084-cf51-0410-be5f-012b33b47a6e
- fix numerous warnings
- make some variables unsigned
- remove redundant code and header inclusions
- make code more compact in lots of cases
Committing some additional changes by myself:
- additional header cleanups
- cleanup DX11 initialization/shutdown process (hinted at by avindra)
- Remove the cgD3D9 stuff from Externals since it's no longer needed
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5903 8ced0084-cf51-0410-be5f-012b33b47a6e
Because we only ever call Pos_ReadDirect (and through that, DataRead<T>)
from JIT generated code, the compiler may not get the heads-up to properly
prepare for run-time instantiation of those template functions.
Explicitly instantiating Pos_ReadDirect gets around that issue.
Also force DataRead* inline as gcc didn't always do that itself when the
DataRead functions in turn were called from (other) template functions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5902 8ced0084-cf51-0410-be5f-012b33b47a6e
from JIT generated code, the compiler may not get the heads-up to properly
prepare for run-time instantiation of those template functions.
Explicitly instantiating Pos_ReadDirect gets around that issue.
Also force DataRead* inline as gcc didn't always do that itself when the
DataRead functions in turn were called from (other) template functions.
I am far from a C++ language lawyer, so I cannot speak learnedly about the
correctness of this solution, but it works.
Dolphin.app built on OS X 10.6 now actually works on 10.5 as well.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5901 8ced0084-cf51-0410-be5f-012b33b47a6e
Move MAP_32BIT to MemoryUtil.h.
MAP_VARIABLE is simply the absence of MAP_FIXED.
Replace MAP_ANONYMOUS with the more traditional MAP_ANON - Linux is compatible.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5900 8ced0084-cf51-0410-be5f-012b33b47a6e
Move MAP_32BIT to MemoryUtil.h.
MAP_VARIABLE is simply the absence of MAP_FIXED.
Replace MAP_ANONYMOUS with the more traditional MAP_ANON - Linux is compatible.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5899 8ced0084-cf51-0410-be5f-012b33b47a6e
- Eliminate the useless check for cpu modifications option from efb to ram as it must be enabled always
- use constant names in dx11 for buffer length calculation instead to simplify code reading
- implemented scaled efb copy in opengl, still bugy in some games, the option is not in the gui but will add it when it works perfect
- Change the depth calculation behavior:
if the game use z textures is exactly the same as before.
if the game do not use z texture calculate z values in the vertex shader. the advantage id this approach is that early z culling is applied,
improving fill rate. this mus speed up things, even with ssaa and msaa enabled.
please test for regression and enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5896 8ced0084-cf51-0410-be5f-012b33b47a6e
For a typical OS X app, one only needs to specify the SDK version and the
target OS version range.
Because we use OpenCL which is new in 10.6, however, we must be somewhat
more verbose in order to make use of the forward compatibility facilities.
Unfortunately, the critical bit that is required to have binaries built
on 10.6 work on 10.5, namely disabling the new compact __LINKEDIT format,
causes stack alignment crashes at emulation time on 10.6, so for now
Leopard users still have to build Dolphin themselves.
Hopefully, this stack alignment problem will turn out to be coincident
with lingering alignment issues.
Include the OS X version of the Cg framework in Externals as with the
Windows one. The header files appear to be the same in the Windows and the
OS X builds of the February 2.2 Cg toolkit, although they are differently
munged by what appears to be some automatic process, so no new duplicates.
Any upgrades to the Cg libraries will of course need to be done in sync.
I do hope that Sonicadvance1's GLSL work will enable us to get rid of Cg.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5893 8ced0084-cf51-0410-be5f-012b33b47a6e
Use linear filtering for various buffer copies, improves visual quality a lot.
Some other tiny changes as well.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5891 8ced0084-cf51-0410-be5f-012b33b47a6e
Dynamically load a d3dx9 dll at runtime (I tested Dolphin with the first d3dx9 dll and it even worked fine there).
Should fix the flood of users asking why they can't select the DX9 plugin :P
Compilers should be able to stop bundling cgD3D9.dll now.
Minor changes in DX11.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5890 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SDL for input devices only on Windows and Linux.
(Still globally enabled for the legacy Wiimote plugin.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5886 8ced0084-cf51-0410-be5f-012b33b47a6e
can go to the log window like with other subsystems.
Remove a Wiiuse dependency on libm from when it was a shared library.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5885 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented new efb to ram in opengl
modified TextureConversionShader preparing the implementation of new efb to ram in dx11
please test for regressions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5874 8ced0084-cf51-0410-be5f-012b33b47a6e
Also two little changes which don't affect functionality or performance:
Change an IUnknown* cast to a T* cast.
Improve some error messages.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5870 8ced0084-cf51-0410-be5f-012b33b47a6e
Move bits of HAVE_OPENCL/HAVE_WX for OS X from SConstruct to header files.
Use /usr/lib/libz on OS X now that we no longer have -L/opt/local/lib in
the library path. It is still possible that we could pick up a libz in
/usr/local/lib that would make the application non-redistributable, but
the danger is much less than previously.
Also bits of minor portability cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5868 8ced0084-cf51-0410-be5f-012b33b47a6e
are properly declared at thread entry/exit. I am leaving the ones in
Wiiuse while there's still a small hope that it may be used outside of
Dolphin, though.
Move the fixed MAP_32BIT definition for OS X to Common.h.
UDPNunchuk.cpp was deleted, so update the scons build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5864 8ced0084-cf51-0410-be5f-012b33b47a6e
fix frame dumping and screenshots in d3d9 and opengl
some improvements to the new efb to ram
please test to see if the issues introduced by the new efb to ram are solved by this commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5862 8ced0084-cf51-0410-be5f-012b33b47a6e
identifying which options and parameters go with which platforms etc.
OS X, like Windows, now no longer uses Config.h. Configure() is still
used for the wx-config parameters, but that is a temporary measure.
Globals.cpp has never been used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5860 8ced0084-cf51-0410-be5f-012b33b47a6e
Put the filename back into the "Saving settings ..." notice log (soren don't remove this again.)
Added a "batch" mode command line option. Now dolphin will not exit with the emulator if a file is run from the command line unless you also use the "batch" option. For example in linux "dolphin-emu -b -e filename".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5859 8ced0084-cf51-0410-be5f-012b33b47a6e
This "run once" behavior is more in line with expectations of a command
line invocation and matches what the nowx build does.
Personally, this makes the main build do everything the nowx build does
and more.
However, if you feel that the main build still doesn't have feature parity
with nowx, please say so now, so we can fix it and kill off nowx.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5855 8ced0084-cf51-0410-be5f-012b33b47a6e
using it as a constant in several places. Saves a few bytes and the time
it takes to recompile a bunch of files whenever svnversion twitches.
Using the SVN version string as an integer is not portable as the Unix
svnversion always includes e.g. the "M" suffix for a modified tree.
Windows people, please check my change to Plugin_VideoDX9/Src/main.cpp
as I don't really understand how _T() and the %hs format string work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5852 8ced0084-cf51-0410-be5f-012b33b47a6e
normally (on a fresh install) be triggered by the user clicking on
the GUI.
This notably includes refreshing the game list. The progress dialog
used in the course of updating the game list relies on wxWidgets
being able to yield to its event handler which isn't started until
after OnInit.
In fact, we might want to consider just moving all the initialization
currently triggered by OnInit into AfterInit so that we can rely on
the event handler running there. This would mean that we don't have to
worry about whether those code paths are triggered by a user click or
run at init time. This will require some more testing, though.
For now just move automatic booting along as this requires the game
list initialization to be done.
We also could instead choose to special-case cases like updating the
game list and simply not use a progress dialog there if the event
handler isn't running, but this approach is clearly cleaner.
See thread at http://code.google.com/p/dolphin-emu/source/detail?r=5848 .
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5849 8ced0084-cf51-0410-be5f-012b33b47a6e
Some general code cleanup, and removed a PanicAlert (made it a NOTICE_LOG instead) so that only one panic alert is shown when attempting to load from dvd/cdrom drives, and none are shown when "Show Drives" is selected from the menu.
Also removed the hack introduced in revision 5564 that prevents the GameListCtrl from being properly updated when a game is loaded from the command line or via the autostart feature of the debugger.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5848 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fixed a segmentation fault caused by the UDP Wiimote stuff when a thread was not properly ended.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5847 8ced0084-cf51-0410-be5f-012b33b47a6e
replace efb to ram implementation by a hybrid approach.
explanation:
when copying from efb to texture, instead of make a copy to a texture or to the ram, copy the data to both, in hi quality to the texture and in native quality to the ram.
then instead of re-decoding the data from ram (very slow) use the data in the texture.
to improve this even more, test if the cpu has modified the data in the ram copy, if so, update the texture in memory and mark it as dynamic to avoid redundant work in future frames.
having all this implemented this is what is archived:
sms: full quality with scaled efb copies and fully functional goop cleaning :)
ztp: efb to texture speed with full map support.
nsmbw: this is a hard to emulate game, as it make a lot of shading and texture modification in cpu. it only have 35 fps in my system with new efb to ram but is 10 fps faster than normal efb to ram.
this game also show me another unimplemented feature, copy efb to multiple textures at the same time (is used to animate coins and other things in the world).
this is a remaining todo in efb to texture.
a lot of games should improve, so please test and let me know any regresion caused by this commit.
if everyone likes this the next step is, implement efb to multilpe textures and merge efb to ram and efb to texture.
then port to the other plugins.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5846 8ced0084-cf51-0410-be5f-012b33b47a6e
i made this changes trying to found the origin of the sps in zww and sms but no look so far.
the code is looking nice so commit it
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5845 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added JIT breakpoints functionality
* Added a menu option to disable the JIT block cache
* Enabled single stepping in JIT mode as a run-time option (automatically enabled when the debugger is used)
* Enabled the missing JIT Off menu options
* Removed the JIT Unlimited Cache hack
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5833 8ced0084-cf51-0410-be5f-012b33b47a6e
For everyone having black screens on Windows: Try switching off MSAA, it seems to be broken (at least for me)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5832 8ced0084-cf51-0410-be5f-012b33b47a6e
Update Issue 2508
This should take care about the black screen. Please open a new issue for other problems that may arise.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5830 8ced0084-cf51-0410-be5f-012b33b47a6e
as an accident of implementation. On other platforms, an explicit call
to wiiuse_connect is required.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5825 8ced0084-cf51-0410-be5f-012b33b47a6e
Treat external data (configuration file and device names) as 8-bit data.
Character set mapping is not ideal, but at least such names can be used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5824 8ced0084-cf51-0410-be5f-012b33b47a6e
return to the old values in constants in pixelshader, the old values give mi 3 or 4 fps more,(maybe some kind of compiler optimization) in some games and with the current algorithm i notice no difference with this values, please report any problem.
optimizes SSAA to make it a little faster and, the quality should be the same but with a little speedup.
change the way the frame is processed depending is xfb is enabled or not to make this a little faster.
please test and report any problem
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5820 8ced0084-cf51-0410-be5f-012b33b47a6e
Add some useful checking to J_CC/SetJumpTarget.
Refactor increment/decrement and reuse code with increase/decrease.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5816 8ced0084-cf51-0410-be5f-012b33b47a6e
1 - Optimize pixelshadergen to avoid redundant register overflow math, with this if a game don't need this will be not applied.
this must bring some fill rate back and improve speed a little in fill rate limited systems.
2- some corrections to vertexshadergen to avoid uninitialized texture coordinates, dono if is the correct way to fix it but t least it will make house of the dead overkill playable in dx11.
the bad thing: still missing geometri in dx9, in dx11 it works exactly as on opengl.
3 - some optimization made to improve fps a little wih the latests changes made to fifo.
* back to the original code in beginfield as now it will work right.
* check for efb access more often as a lot of time is lost waiting for efb access
4 - apply a little fix for missing textures in nvidia opengl tanks to Wagnard28 for finding that nvidia does not like invalid shader id :)
please test for any regression
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5812 8ced0084-cf51-0410-be5f-012b33b47a6e
If compilation fails, rebuild the whole solution as Visual Studio struggles with the not so complex project dependencies.
ATI users still need to install the Stream SDK as it's the only way to have an OpenCL driver.
NVidia users just have to install a recent driver (version 197 is tested and working).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5808 8ced0084-cf51-0410-be5f-012b33b47a6e
frameworks on OS X.
Try to be a little clearer about which configuration options apply
to which platform(s). Should pave the way slightly for win32 scons.
We have accidentally been using LUA_USE_LINUX on OS X all along.
Turns out that LUA_USE_MACOSX is for an ancient version of OS X and
LUA_USE_LINUX is a reasonable set of defaults for modern Unices, so
just keep using that.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5804 8ced0084-cf51-0410-be5f-012b33b47a6e
with OpenCL will also run on 10.5 without OpenCL.
Build with OpenCL by default now, but keep the opencl build option around
until Linux also links OpenCL weakly, at which point it can go away.
Start to merge in the actions required to make the OS X application bundle
redistributable into the main build and let bundle=true be concerned only
with the optional step of creating a dmg.
Some people are building binary snapshots for OS X without applying the
install_name_tool fixups and besides, osx_make_dmg.sh doesn't fully handle
the internal dependencies between the wx libraries, so we need to be rid
of any external dependencies by the time "scons bundle=false ." finishes.
Ideally we should just use static builds of the wx libraries, but the flat
namespace used by Objective-C for anything other than normally linked
dylibs (sadly not dlopen'ed dylibs) makes that difficult because both the
main binary and the plugins have wx linked in without any symbol ordering.
TBD: Either do automatic install_name_tool fixups for both the main binary
and the wx dylibs or find a workaround for the flat namespace problem.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5797 8ced0084-cf51-0410-be5f-012b33b47a6e
for portability.
(It is a bit unfortunate that some of the plugins have a Config.h of
their own, which can confuse this matter.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5795 8ced0084-cf51-0410-be5f-012b33b47a6e
few different variations that can be true depending on circumstances.
This would likely cover the _WIN32 case as well, but since I don't
pretend to fully understand just what is going on with wxWidgets
here, I can't really call this any less of a hack..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5794 8ced0084-cf51-0410-be5f-012b33b47a6e
meant as a ideally persistent device instance number.
In a dynamic environment such as when dealing with USB/bluetooth HID's,
I am not sure how much sense such an id can make and it would probably
be better to identify devices by an opaque blob (and a printable string).
In any case, the OS X HID manager does not offer the illusion of a
persistent integer instance identifier.
A string in the form of the device's own name is not sufficient as on
e.g. my Macbook Pro, there are three HID devices all bearing the name
"Apple Internal Keyboard / Trackpad".
For now, hijack the ControllerInterface id to mean the the HID usage
page number. This at least separates keyboards and pointing devices,
allowing the keyboard to be selected in the configuration dialog.
Also some minor cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5793 8ced0084-cf51-0410-be5f-012b33b47a6e
leaking memory. This is necessary because the wxgl code called from
those threads relies on deferred release.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5792 8ced0084-cf51-0410-be5f-012b33b47a6e
Wiimotes are now slighty more responsive and multiple wiimotes should harmonize now slighty better. This clean up was requested/inevitable and should have be done way more earlier. This "might" break osx/linux builds, so please test. If your aware of any "real wiimote" issues please post it in the comments as well(dont forget to state your OS).
Known wiimote issues:
1.) Possible wiimote disconnect on pressing the home button
2.) 1-2 Possible wiimote disconnects directly after starting a game
3.) Rumble causes lag. I don't think this is a wiimote plugin issue itself, I'm not sure tho. It would be interesting to know whether the lag still happens on emulated wiimotes as well, when the game tries to rumble.
4.) Connecting(pairing up and refreshing) a 2nd/3rd/4th real wiimote while having a game running/paused, might swap player slots and cause disconnects at that moment.
If u have more issues, feel free to post them, to have them all here collected once more to get a brief overview.
Apart from that, increase the wiimote read timeout @settings(20-200). If your expecting frequent disconnects, restart dolphin, and don't open the wiimote gui before playing instead directly start games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5788 8ced0084-cf51-0410-be5f-012b33b47a6e
Dual Core sync fix.
When the FIFO is processing data we must not advance the cpu cycles in CoreTiming because in this way the VI will be desynchronized. So, We are waiting until the FIFO finish and while we process only the events required by the FIFO.
This should fix Issue 2072 .
This affect to all games in dual core mode.
Please, You can test all games with VPS limiter auto, 60, 50 depending of the game and compare with prev revision.
For example now NSMB in the video Intro has 60 fps (prev 30 fps) :D or SMG does't need anymore FPS Limitter Hack to get 55-60 fps
Beside the slowdowns now are more softly and the fps more stables because the VI sync is almost perfect.
The Core Timing and Fifo modifications are delicated. Please report if this hang any game. Don't forget check with prev revision.
Enjoy it! Thanks to Rodolfo for teach me all about dolphin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5777 8ced0084-cf51-0410-be5f-012b33b47a6e
From now on if you create a GUI option specific to a particular build, do not gray it out. Instead do as I have done here and make it not present on those builds. It may add a few precompiler conditionals that developers have to look at, but that is considerably better than a completely useless option that the end user has to look at.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5774 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the decoder codepath when OpenCL is enabled and the DX11 plugin is used.
Added the DX11 plugin to the Dolphin project dependencies.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5764 8ced0084-cf51-0410-be5f-012b33b47a6e
Cleanups, documentation, ...
Theoretically enable anisotropic filtering if selected in the config, not sure if it works though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5761 8ced0084-cf51-0410-be5f-012b33b47a6e
I don't know if issue 2792 is a valid issue for dolphin. I think that is a bug in the X server implementation on those distributions of those affected. I can not replicate it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5758 8ced0084-cf51-0410-be5f-012b33b47a6e
Make font rendering a lot prettier.
Fix constant buffers in EmuGfxState::ApplyState() to really have a size which is a multiple of 16 instead of 65536.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5755 8ced0084-cf51-0410-be5f-012b33b47a6e
minor code changes and adding comments.
And issue fix 2792 with credits to Karloathian for finding and fixing it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5750 8ced0084-cf51-0410-be5f-012b33b47a6e
Remove superfluous _WIN32 checks in DX11 and DX9. Meant to port that code over to Linux or what? :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5738 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix all remaining window resizing issues.
Implement screenshot functionality (doesn't seem to work completely, yet).
Assign debug names to (hopefully) all remaining device objects.
Flush the GPU's command buffer in Close() to make the ReportLiveDeviceObjects output clearer.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5730 8ced0084-cf51-0410-be5f-012b33b47a6e
Advantages:
- easier to use
- drops our dependence on d3d10.lib, without depending on the June 2010 DX SDK
- makes finding unreleased buffers easier
- possibly more ;P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5728 8ced0084-cf51-0410-be5f-012b33b47a6e
Disable D3D10_SHADER_ENABLE_BACKWARDS_COMPATIBILITY when compiling pixel shaders in Debug configurations as well.
Properly support centered text drawing, even though it's not used, yet. Credits go to xsacha for this one.
Found an awesome hacky way to free the buffer memory used by ReplaceTexture2D. At least it gets freed at all now...
Various other tweaks to texture conversion.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5724 8ced0084-cf51-0410-be5f-012b33b47a6e
wiimotes, so that wiiuse_find has a chance to return early when that
number is found rather than wait for the 5 second timeout always.
Hide the auto-(re)connect UI elements on non-Windows so as not to
confuse users until that functionality is implemented generally.
Empty strings are not allowed in wxChoice lists.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5714 8ced0084-cf51-0410-be5f-012b33b47a6e
LZO/SFML/SOIL and subject to the same shared_foo exception options.
This makes building a self-contained distribution package much easier.
TBD: Cg and wxWidgets 2.9.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5712 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed screen clearing and simplify drawClearQuad a little
put some nice code from dx11 that i like in dx9.
modify plugin spec preparing for implementing efb poke (is not used often but is a missing functionality so..)
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5710 8ced0084-cf51-0410-be5f-012b33b47a6e
By now I'm pretty sure some games are written in multi-thread, and they depend on Watermark to suspend/resume their threads.
So without Watermark, they will never work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5709 8ced0084-cf51-0410-be5f-012b33b47a6e
the properties window so that a large ISO directory doesn't cause
the window to take up the full height of the display.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5700 8ced0084-cf51-0410-be5f-012b33b47a6e
Set default video mode format to DXGI_FORMAT_R8G8B8A8_UNORM. This might fix FRAPS recording, but also decrease FPS; test both, please.
Add numerous TODOs
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5695 8ced0084-cf51-0410-be5f-012b33b47a6e
Use 10.5 SDK header files in an attempt to keep us honest and
10.5 compatible. I'd do the same with system libraries, but
the linker gives strange errors when I try that. We also link
against third party libraries from Macports that haven't had
any magic 10.5 compat dust sprinkled over them, so maybe it
isn't very important anyway.
Move the OS X variable section in SConstruct upwards a bit to
have the settings apply to more of the config tests. SCons'
ParseConfig causes problems for the -arch tuples, though, so
the SDL check still isn't quite as comprehensive as it should
be.
Put the XCode project out of its misery.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5693 8ced0084-cf51-0410-be5f-012b33b47a6e
modify shader generator to produce native sm 4.0 code.
eliminate compatibility mode in dx11 so now all shader must work much better.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5691 8ced0084-cf51-0410-be5f-012b33b47a6e
I have no idea how all this stuff works, but this fixes at least some (if not all) games which worked before r5681.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5689 8ced0084-cf51-0410-be5f-012b33b47a6e
Improved dual core mode for "Metroid Prime 2", "Star Fox Adventures", etc.
I should have committed this long time ago, but I don't have every game to test compatibility... Any way, better late than never.
PS: If any regression observed, feel free to revert this rev.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5681 8ced0084-cf51-0410-be5f-012b33b47a6e
Might or might not work for you, yet.
Anyway, read the soon to be created forum thread on this plugin before asking any questions.
Huge thanks to rodolfoosvaldobogado for helping me out in various areas.
Also, thanks to everyone on IRC who supported me during development ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5680 8ced0084-cf51-0410-be5f-012b33b47a6e
In the future if we merge wiimote too, this will bring the advantage that the two will be able to cooperate, to no longer fight over control of input devices which can sometimes cause problems.
Thanks shuffle2 for the patience.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5670 8ced0084-cf51-0410-be5f-012b33b47a6e
I hope I didn't break the mac+linux builds - if i did, fixing it should be a simple matter of adjusting the sconscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5661 8ced0084-cf51-0410-be5f-012b33b47a6e
- be more strict with the input signature of generated pixel shaders
- replace the D3D parameter with an API_TYPE one, so that we can further distinguish between DX9 and DX11
- for what it's worth dx11 (using vs_4_0) doesn't support D3DCOLORtoUBYTE4; added a workaround for this
- add a "dx9-" prefix to the shader cache files to avoid conflicts with dx11 shaders
Apart from that we're calling CommandProcessor::Shutdown() in main.cpp,Shutdown() now.
Delete all files in User/ShaderCache if you want to save a few KB disk space :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5659 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix: fix for lighting equations , that must improve lighting in a lot of games ( test smg :) )
experimental speedup: implemented alpha pass using stencil buffer instead of a duplicate shader. i recommend to test this well as i dono if will work the same way in all the systems. i my system it gives a nice 2-5 fps improvement. if it brings problems in any system or game will revert asap.
enjoy
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5653 8ced0084-cf51-0410-be5f-012b33b47a6e
Ideally we should be more character set aware, but at the moment we
use anonymous 7/8-bit strings in too many places.
Fix use of AddGrowable{Col,Row}. Any (non-zero) rows/columns must
have been created first by adding an item to it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5648 8ced0084-cf51-0410-be5f-012b33b47a6e
the original author, in the About dialog. Ok'ed with him.
WX doesn't reflow text terribly well, so format it manually.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5646 8ced0084-cf51-0410-be5f-012b33b47a6e
Thanks soren for the macosx fixes, this fixes the windows build and eliminates some warning from the same.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5643 8ced0084-cf51-0410-be5f-012b33b47a6e
Patch from user gamepromcompany on the MacOSX_Build wiki page.
Add support for the Mac command key as a hotkey modifier in
WXKeyToString but present it as Control. WXKeyToString is used for
both hotkeys and menu accelerators, the latter only supporting
Shift/Alt/Control with wxWidgets.
wxSpinCtrl on wx 2.9 has a very small default size, so give the
window size ones a reasonable size.
Use wxFULLSCREEN_ALL when switching to fullscreen, which gets rid
of window decorations like the title bar. Note that to actually
be rid of it with wx 2.9 on OS X, you'll need this patch:
http://trac.wxwidgets.org/ticket/11701
Also remove a couple of files I had accidentally duplicated.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5642 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes a number of problems, including unreliable connection setup,
frequent disconnections, busy-waiting and shutdown deadlocks.
Motion Plus and nunchuk hot swapping now work and Wiiuse does a small
amount of queueing to prevent occasional dropped packets. The OS X
bluetooth stack has no internal input buffering and while a worker
thread can easily keep up with data coming from the Wiimote, the rest
of Dolphin can easily get behind if it is blocked by disk I/O or
similar. Mostly the Wiimote protocol recovers from dropped packets,
but sometimes the Wiimote would get out of sync and send a disconnect.
I wonder if the other platforms might benefit from a bit of queueing
at this layer as well.
Still doesn't support multiple devices, as I kept changing my mind
about how best to do it. I only have one Wiimote anyway..
One improvement to the Wiimote plugin that would be really nice would
be for the scan for new devices to operate continuously or periodically
like on a real Wii rather than just for 5 seconds at startup..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5640 8ced0084-cf51-0410-be5f-012b33b47a6e
efb scale :
auto fractional: the original scaling way, will grant a 1:1 pixel mapping between efb and screen giving the best image quality even in non standard resolutions
at the cost of glitches in some games.
auto integral: automatic but only int values for the scale, no glitches but only the correct pixel scaling when using some resolutions.
the rest are the fixed scales.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5639 8ced0084-cf51-0410-be5f-012b33b47a6e
enable newline normalization
get revision number via `hg svn info` for svnrev.h
ignore incremental/generated binary files (windows/VS at least)
leave a comment if some files need native eol set in svnprops
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5637 8ced0084-cf51-0410-be5f-012b33b47a6e
We really should integrate the nowx functionality into the main build,
removing nowx and HAVE_WX checks and turning USE_WX into a variable
that defaults to GUI use but can be overridden at the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5630 8ced0084-cf51-0410-be5f-012b33b47a6e
hotkey configuration working with wx 2.9, but it turned out to be
too tempting to use it to hack up OS X keyboard support using wx
key events in the "old" input plugins.
It was with some reluctance that I used PAD_Input (and copied it
for Wiimote as well) as that is clearly a deprecated interface,
but this way the hack is contained within the old plugins for when
the switchover to ControllerInterface happens.
The idea is to provide stable keyboard support on OS X for both
GCPad and Wiimote while we debug HID keyboard and real 'mote code.
It works pretty well, although the wx approach does impose a few
limitations like no arrow keys and left/right side modifier keys
are considered equivalent.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5622 8ced0084-cf51-0410-be5f-012b33b47a6e
just the basename like libPlugin_foo.dylib. Dolphin then loads the
plugins relative to the compiled-in plugins directory.
This means that you won't have to reselect the plugins when running
different builds (in different directories) and is most obviously
beneficial on OS X where application bundles are not (should not) be
expected to stay in the place where they are first installed.
This is tested on OS X and Linux with local/global build options, but
not Windows. I don't anticipate any problems on Windows, but that OS
does have slightly different semantics with regard to path component
separators and file suffixes, so it's something to watch out for.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5621 8ced0084-cf51-0410-be5f-012b33b47a6e
in general cleanup and bugfix disable pierre patch for the moment as it causes problem in some games and hopefully fix the remaining missing textures for nvidia users in opengl.
make the code in pixelshadergen looks nice and readable.
D3D: this is a ultra experimental commit please check for regressions or error.
make the efb Scale / super sampling level customizable to improve the output quality and let the user configure quality according to his hardware.
is everyone likes this change will translate it to opengl
please test
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5612 8ced0084-cf51-0410-be5f-012b33b47a6e
dok.slade