613e215c73
gsdx-ogl: add some note for the persistent buffer + add a flush
...
Persistent is slower (at least on my gs dump) because data is put
in host instead of the video memory
I don't understand why upload the data directly to the video memory
is faster
2015-05-15 15:25:45 +02:00
5628bfb20c
gsdx-ogl: drop old code
...
I have group so it doesn't pollute anymore gl trace
2015-05-15 15:25:45 +02:00
ff4cf51494
use volatile
2015-05-14 13:23:09 +01:00
6d8695127f
gsdx-recorder: use recursive mutex
2015-05-14 11:56:07 +02:00
a0ec633c46
Provide a DEV9async and use it to call irq
2015-05-13 10:04:04 +01:00
bd96a73580
gsdx-debug: trace texture cache hit/miss/removal
...
Actually only a small part but I think it is enough to help debugging
tc issue.
Only enable it on debug because it is quite verbose
2015-05-13 09:01:04 +02:00
5e9a3a424e
Merge pull request #479 from PCSX2/gsdx-texture-cache
...
gsdx: value was wrongly overwritten
2015-05-13 08:08:46 +02:00
b7a9465963
gsdx-ogl: update the device to use the new texture flags
...
Hopefully it will increase a bit the speed
2015-05-12 18:18:20 +02:00
3e784d57e8
gsdx-ogl: add some flags to trace texture state
...
goal1: avoid 2 consecutives clean of the render target
goal2: only invalidate texture correctly
2015-05-12 18:03:06 +02:00
2e34d48e97
gsdx-ogl: add a virtual GetID method for texture
...
Much more readable
2015-05-12 17:41:41 +02:00
e0012811ae
gsdx-debug: more debug info in gl trace
2015-05-12 12:36:34 +02:00
4e222f18cd
gsdx-ogl: it was a bad idea to use DSA on fb
...
Actually I'm not sure we can mix both dsa/standard approach
2015-05-11 18:04:16 +02:00
f37f3cb3cf
gsdx-ogl: improve texture uploading
...
Initially we copy pitch by line in the PBO and tell the dma to only
use the first valid byte.
Now, we only copy useful data to the PBO. It reduce the copy and PBO memory requirement.
It seems a bit faster on native resolution
2015-05-11 16:32:13 +02:00
4e2e9aa56c
gsdx-ogl: always read the first attachment of the fbo
2015-05-11 16:28:34 +02:00
cb6e8a7d6a
gsdx-linux: Don't enable EGL by default
...
I was hoping that EGL become a standard much more faster. Currently it is an useless dep
so let's disable it by default.
2015-05-11 15:33:40 +02:00
643b1647c4
gsdx-gui-linux: add some tooltips for the hw options
2015-05-11 14:12:41 +02:00
921fa3bab8
gsdx-ogl/linux: drop fba option
...
It is useless as DX11
2015-05-11 13:57:26 +02:00
f0de7d6386
gsdx-debug: add 2 extra frames in GS dump
...
Initially I was afraid of the size increase but it can be
higly compressed.
Sometimes image was computed inside a RT but never outputed to
the screen which remains black. It is annoying to see the glitches
2015-05-11 13:45:24 +02:00
b3d8981a22
gsdx: link replayer to png to avoid link failure
2015-05-11 13:24:40 +02:00
eff4ac3e4a
gsdx-ogl: update UBO hint
...
On Nvidia, DYNAMIC is a bit faster.
2015-05-11 12:35:41 +02:00
59f7e4d2dc
Revert "gsdx linux: drop aligned stack option"
...
This reverts commit 2dcffe7fa4
2015-05-11 12:15:38 +02:00
2dcffe7fa4
gsdx linux: drop aligned stack option
...
I think the bug was related to a wrong declaration of exported function without stdcall
2015-05-11 11:35:34 +02:00
286fe4db8c
cmake/gsdx: check png++ is installed to support png image
...
Otherwise fallback to bmp file
2015-05-11 11:32:13 +02:00
30e3956ea7
gsdx-ogl: avoid issue with apitrace
...
The tool doesn't support NaN value so be sure the buffer is correctly initialized
2015-05-11 11:19:18 +02:00
1523b9534f
gsdx-debug: compact the code
2015-05-11 11:19:00 +02:00
51ed3e63e9
glsl: oups forget to remove a line
2015-05-10 10:39:23 +02:00
5565544ba6
gsdx-ogl: DATE with texture barrier
...
Much faster for small batch that write the alpha value. Code can
be enabled with accurate_date option.
Here a summary of all DATE possibilities:
1/ no overlap of primitive
=> texture barrier (pro no setup of stencil and single draw)
2/ alpha written
=> small batch => texture barrier (primitive by primitive). Done in N-primitive draw calls.
(based on GL_ARB_texture_barrier)
=> bigger batch => compute the first good primitive, slow but only 2 draw calls.
(based on GL_ARB_shader_image_load_store)
=> Otherwise there is the UserHacks_AlphaStencil but it is a hack!
3/ alpha written
=> full setup of stencil ( 2 draw calls)
2015-05-09 19:54:01 +02:00
390811f414
gsdx-debug: Dump in PNG on linux & dbg/dev build
...
Keep BMP for standard user of release build
2015-05-09 18:41:17 +02:00
3c7a3a3d83
gsdx-ogl: disable accurate option if driver doesn't support it
2015-05-09 18:41:17 +02:00
7fac25edb0
glsl: add shader implementation of impossible blend
...
Issue: I don't know if destination alpha value must be multiplied by 2.0f
2015-05-09 15:02:34 +02:00
f029e4763f
gsdx-ogl: add the alpha value in a constant buffer
2015-05-09 15:02:34 +02:00
472608b879
gsdx-ogl: add accurate blending implementation
2015-05-09 15:02:13 +02:00
1e8aea033c
gsdx-ogl: add a wrapper to control the drawing of primitives
...
No barrier => draw all primitives
Barrier but without overlap => draw all primitives
Barrier with overlap => draw primitive by primitve
It will ease the implementation of accurate blending and why not date too
2015-05-09 15:01:39 +02:00
625d65d4b4
gsdx-ogl: encode the bogus id as shader parameter
2015-05-09 14:55:44 +02:00
bc5de8df6b
gsdx-ogl: disable FF blend when blend is done in shader
2015-05-08 20:28:50 +02:00
380e420cdd
gsdx-ogl: add a blend parameter to shader
2015-05-08 20:28:50 +02:00
9023f5f0db
glsl: drop useless ifndef
...
I often mix them with the real value...
.
2015-05-08 19:28:17 +02:00
8e1db43431
gsdx-debug: debug stuff
2015-05-08 19:28:17 +02:00
3c66da4d82
gsdx: remove old code
2015-05-08 19:28:16 +02:00
1addae1993
gsdx-ogl: don't use extra shader for sprite hack
...
Atst == 2 && sprite_hack is equivalent to Atst == 1
It frees a bit in the shader selector, and reduces shader combinations.
2015-05-08 19:28:16 +02:00
b490085214
gsdx-ogl: add 2 options in the GUI to ease testing
...
accurate_date => use an emulated stencil to compute destination alpha
test (could be slow)
accurate_blend => do nothing (future)
2015-05-08 19:28:16 +02:00
4c91bab00e
gsdx: fix compilation error on release build
2015-05-08 19:28:00 +02:00
6d31124d3a
gsdx-debug: only enabled advance gl debugging on linux
...
It will avoid some crash on windows for driver that doesn't support
the extension.
Make debug support mandatory for debug build on linux.
2015-05-08 09:54:34 +02:00
e87d129b09
gsdx-ogl: more verbose debug
2015-05-08 01:01:01 +02:00
d6448183d7
gsdx-ogl-debug: insert error message in GL stream
...
This way, you can see your message in the GL debugger
2015-05-08 00:16:31 +02:00
544a923e32
gsdx: Add an option to control auto skip of depth texture
...
Default is 1 if the user enable hack.
It fixes GTA sun effect and likely others bugs.
Please someone add a windows GUI option.
2015-05-07 23:54:22 +02:00
51a67029cf
gsdx-ogl: add an option to print gl error messages
2015-05-07 23:54:22 +02:00
7518b2ef21
gsdx-gui-linux: add debug option in the gui
...
* Only for debug/dev build
* look awful (expand/fill) but otherwise it is nice for the debug ;)
2015-05-07 23:54:22 +02:00
d20501739f
Merge pull request #528 from ssakash/patch-1
...
sync with GSdx.ini variable.(fix earlier typo)
2015-05-07 22:15:41 +02:00
fda746ff93
gsdx-gui-linux: support 3 states hack options
...
Based on a Combo Box on linux. As good as 3 states check buttons
2015-05-07 22:13:49 +02:00
d69ffa9b8b
gsdx-gui-linux: move remaining table filling into small functions
2015-05-07 22:13:49 +02:00
b39b9c9f55
gsdx-gui-linux: use callback everywhere
...
Note: texture offset doesn't work nicely (you need to press enter
to validate the change)
2015-05-07 22:13:49 +02:00
d428e0d19d
gsdx-gui-linux: move table filling into separate function
...
It is much easier to read this way. I need to use callback for the remaining
object before I can move everything out of main function.
2015-05-07 22:13:49 +02:00
917a6c28e5
gsdx-gui-linux: factorize code
...
* Use wrapper and callback for Check Button/Spin Button/Combo Box
* Use TheApp.m_gs vector to create combo box
Remove nearly 100 lines of code ^^
2015-05-07 22:13:49 +02:00
ba21879059
gsdx-ogl: 1x aniso <=> off
2015-05-07 22:13:49 +02:00
e6560f348e
gsdx: add vector option for linux & openGL
2015-05-07 22:13:49 +02:00
8f1d00292b
gsdx-ogl: allow to control vsync on Windows
...
Issue #529
Completely untested
2015-05-07 18:41:10 +02:00
6095f40baf
gsdx-ogl: add the number of free bit in selector structs
2015-05-07 18:41:10 +02:00
9a083d5506
gsdx: crc hacks: few new crcs, few crcs region changes
...
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
2015-05-07 15:57:50 +03:00
97fad356b8
gsdx-ogl: fix debug build for AMD/Intel HW
2015-05-06 19:09:13 +02:00
cc4713d379
gsdx-debug: extend ogl debug capabilities
...
Group opengl calls into a nice name.
Apitrace shows them in a tree format that support folding. Previously it
was a long flat list (10K-40K of lines by frame)
I align the call number with the internal s_n variable. This way it is
easy to map GSdx dump output with the GL debugger :)
2015-05-06 19:09:13 +02:00
530e4ce776
gsdx-ogl: drop hack that rescale primitive (to avoid upscale glitch)
...
Rendering is bad. It renders sprites at native resolution.
2015-05-06 19:09:13 +02:00
6d65867b26
gsdx-ogl: comment point_sampler
...
It is not enabled on the shader so I will reuse the bit
2015-05-06 19:09:12 +02:00
3fcac07120
gsdx-ogl: print some message when blending is not properly supported
2015-05-06 19:09:12 +02:00
6fca3b421d
gsdx-debug: dump register context in a .txt file
...
+ Realign s_n number if frame is skipped
This way it is easier to understand current draw. It also eases
comparaison between SW/HW.
2015-05-06 19:09:12 +02:00
24e37d2dea
sync with GSdx.ini variable.(fix earlier typo)
...
fixed the description for round offset hack.
fixed the new description for round offset hack.
2015-05-05 23:01:46 +05:30
5d4bc5c8fe
Merge pull request #516 from PCSX2-underground/master
...
round offset UI initialization
2015-05-05 17:48:53 +02:00
5f5b901bca
gsdx-ogl: alpha bending equation/function are constant
...
Drop useless variables/state checking
2015-05-05 11:20:25 +02:00
8032e2c369
gsdx-ogl: separate color mask state from the blending state
...
Unlike DX they're uncorrelated.
2015-05-05 10:26:01 +02:00
302ce51efe
round offset UI explanation
...
initialization of IDC_ROUND_SPRITE
set&get config for round offset.
three state checkbox for the hack.
define IDC for round offset.
Linux (GUI) refresh.
typo
2015-05-05 00:29:00 +05:30
7bfee7e377
gsdx-debug: stop the dump after a limited number of draw call
...
Otherwise it fills your disk in a short time with useless data.
2015-05-03 16:46:48 +02:00
c1ddad2d25
gsdx-linux: Refresh the GUI
...
* Use table everywhere (better alignment)
* Factorize Box/Frame creation
* Factorize table insertion
* Add Anisotropic Filtering support
2015-05-03 16:36:48 +02:00
ae70344fbc
gsdx-ogl: fix 2 passes DATE with GL42 (override_GL_ARB_shader_image_load_store = 1)
...
It fixes shadows issue with Persona 3
2015-05-02 16:56:18 +02:00
14a1925de0
gsdx ogl: date texture is signed to use i variant
2015-05-02 16:53:34 +02:00
f37ef105c5
gsdx-ogl: add support for anisotropy
...
Close feature request #447
2015-05-02 10:54:58 +02:00
b1ec8a5a42
gsdx-ogl: detect support of GL_EXT_texture_filter_anisotropic
2015-05-02 10:53:19 +02:00
73d04e33e9
gsdx ogl: clean various comment and old code
2015-05-01 20:04:23 +02:00
335695bd0e
purge GLES from GSdx !
...
mobile will use vulkan (or any new API) anyway
2015-05-01 20:02:17 +02:00
e17ba1c143
gsdx ogl: disable logz when ARB_clip_control is supported
...
Basically any recent drivers but Catalyst...
2015-05-01 15:01:08 +02:00
2ff3d17f67
gsdx-ogl: don't create override option for mandatory extension
...
Ini is alredy big enough
2015-05-01 14:18:05 +02:00
a0c17ae0a4
gsdx: use vertex storage by default
...
It is faster on games that draw lots of primitives and in low upscaling.
2015-05-01 14:05:45 +02:00
004fa7aea4
gsdx debug: allow to dump alpha channel as a gray texture
...
I would love to find an image viewer that allow to mask channel of the image
2015-05-01 13:38:58 +02:00
c8a3db114c
gsdx debug: create savet option
...
0: don't dump input texture
1: dump input texture
Now, you can do a first pass with only RT. When you find the wrong call, you can redump the input texture of the bad draw.
2015-05-01 13:35:21 +02:00
f96a653d05
gsdx-ogl: GSVertexArrayOGL uses ASSERT with condition
...
Remove useless indentation too
2015-05-01 12:16:26 +02:00
71c26a829e
gsdx-ogl: forget to remove this useless call
...
It is done once in Device Creation instead of per stencil object
2015-05-01 12:10:03 +02:00
c76e66f8d2
gsdx-ogl: fix read back of render target
...
Initial code use a PBO to do asynchronous transfer. It is silly because
GSdx doesn't use this free time. So let's use a sync read. Same speed but
no PBO to manage.
2015-05-01 01:26:44 +02:00
de52ce956a
gsdx linux: update gui
...
Clear texture was dropped but texture_barrier was added
2015-05-01 01:00:11 +02:00
7367b22e03
gsdx-ogl: reduce toggling of scissor state for DATE
2015-05-01 00:59:49 +02:00
71e517108d
gsdx-ogl: fix colclip
...
Sotc shadow and likely various games :)
Thanks to pseudo
2015-04-30 23:08:05 +02:00
25997647f2
gsdx-ogl: add ENABLE_OGL_PNG_OPAQUE to dump texture without alpha
...
Alpha is nice but fully transparent texture suck
The best will be an image viewer that can toggle the alpha channel
2015-04-30 23:06:54 +02:00
39a5d4c839
gsdx: add PNG support for SW renderer
...
Easier to compare
2015-04-30 20:13:24 +02:00
b65a62096f
gsdx-ogl: drop support of ENABLE_OGL_DEBUG
...
Stencil can be read by GL debugger due to correct mask configuration
2015-04-30 20:02:51 +02:00
8a52fdab57
gsdx-ogl: allow to dump texture as png file
...
-- slower (but that a debug feature)
++ smaller (40x-50x)
++ native support of alpha
Require libpng++ and the define ENABLE_OGL_PNG
Note: depth is not supported yet.
2015-04-30 20:02:50 +02:00
ee19a2789c
gsdx: move invalidation from GSDevice to GSTexture
...
Much cleaner this way
2015-04-30 19:55:57 +02:00
2bd9043657
gsdx-ogl: improve debug of stencil
...
Note: ENABLE_OGL_STENCIL_DEBUG could be dropped now that I can read the stencil properly
2015-04-30 19:55:57 +02:00
7887d7b5a5
gsdx-ogl: use less verbose code
2015-04-30 19:55:41 +02:00
f0181d98fd
gsdx-ogl: save the texture state
2015-04-30 09:57:30 +02:00
0ab0c6cfba
gsdx: verbose debug option
...
Print opengl error message on stderr
Rename Debug.txt into GSdx_opengl_debug.txt
2015-04-27 19:30:03 +02:00
eaa0dae305
glsl: drop invariant qualifier
...
Fix issue #510 and potentially it allows the compiler to better optimize the code
2015-04-27 18:52:55 +02:00
46ff4dc3d3
gsdx-ogl: hardware unit only support normalization of 4 bytes...
...
(At least on recent AMD GPU)
2015-04-27 18:51:59 +02:00
301fe869c7
glsl: improve the logz handling
...
This way only 0 and 1 will conflict
2015-04-26 17:51:33 +02:00
768ae342c3
gsdx: move buffer check after allocation
2015-04-26 17:51:06 +02:00
346ef1eec2
gsdx-ogl: ouch! Properly check the creation of vertex buffers
2015-04-26 11:01:55 +02:00
6a3250cad2
gsdx-ogl: fix logz management (FFXII)
...
The issue is that z+1 overflow if z is UINT max
log2(z) overflow if z is 0
So let's use an or 1 to avoid both overflow
2015-04-25 20:23:26 +02:00
ee244071fa
gsdx-ogl: use 64 bits counter + fix division factor
...
I also added a counter of the real size of the texture.
I have a bad overhead for pbo transfer
2015-04-25 14:18:21 +02:00
00e62919c5
gsdx-ogl: use countof macro instead to hardcode the size
2015-04-25 13:06:02 +02:00
47a0026b60
gsdx-ogl: print the bandwidth of uniform
2015-04-25 13:00:03 +02:00
f2f59544d2
gsdx-ogl: early bind vertex array object
...
Creation of buffer will generate a bind in BufferStorage mode. It is just to be safe.
2015-04-25 12:50:12 +02:00
15ae9996bb
glsl: format white space + comment
2015-04-25 12:50:12 +02:00
757726bb91
gsdx-ogl: allow to invalidate the texture
...
It just a hint to the driver to avoid any useless transfer
I don't expect any change but it is free so why not ;)
2015-04-25 12:50:12 +02:00
75817bb27b
gsdx-ogl: add a quick and dirty DSA layer emulation
...
The global idea is to use
1/ bind in tight loop
2/ DSA otherwise (to avoid any binding in tight loop)
2015-04-25 12:50:11 +02:00
eb257d9295
gsdx-ogl: add dsa function place holder
2015-04-25 12:50:11 +02:00
baf84b98c4
gsdx-ogl: add override_GL_ARB_texture_barrier option
...
To ease regression test.
2015-04-25 09:59:25 +02:00
b12eb45bb7
gsdx-ogl: try to avoid crash on fglrx windows
2015-04-25 09:50:19 +02:00
f0182f9a66
windows requires APIENTRY (=> stdcall)
2015-04-25 01:32:09 +02:00
7b0775d887
gsdx-ogl: add some fences to protect the upload of vbo buffer
...
This way ogl_vertex_storage must be safer to activate
And it brings a nice performance boost (game with lots of primitives and
reasonable upscaling)
SotC testcase 4x: 61fps => 78fps
2015-04-24 23:15:19 +02:00
36514bd95f
glsl: fog is a single byte
...
Give a chance to the driver to optimize if possible
2015-04-24 21:37:37 +02:00
c207632e49
gsdx-ogl: improve date performance for GL45
...
If there is no overlap, it is allowed to directly read from the render target.
On SotC testcase with 6x scaling: 30fps -> 40fps
Note: it requires GL_ARB_texture_barrier extension so be sure to have a recent driver
Note2: it requires a lots of testing too
Open question: in case of complex date (written alpha)
Will it be faster to split the draw call into multiple call with no
primitive overlap
2015-04-24 21:12:33 +02:00
795ae50ecd
gsdx-ogl: fix the recently broken advance date feature
...
Now it is really working with a 2 stages shaders but it is still slow.
2015-04-24 20:13:38 +02:00
672e3f9533
gsdx-ogl: use DSA for texture management
...
Yeah code is much nicer :)
2015-04-24 19:34:17 +02:00
6d31d1e0d0
gsdx-ogl: add a layer to emulate DSA for texture
...
Framebuffer function will be nice too
2015-04-24 19:32:00 +02:00
f71eb171cf
gsdx-ogl: add glTextureBarrier function pointer
...
Could be useful
2015-04-24 18:35:01 +02:00
6e386df535
gsdx-ogl: avoid to clean fully texture in DATE
...
Is is useless and it has a small impact on performance for big upscale
2015-04-24 18:32:08 +02:00
03e72781aa
gsdx-ogl: drop support of GL_ARB_clear_texture extension
...
Extension is a bit slower.
We use it to clear the RT but we generally use it right away so
we don't avoid the FB attachment.
2015-04-24 18:15:58 +02:00
89d5e5637c
glsl: use an explicit cast insead of notEqual function
...
If the compiler didn't optimize the code, it will be a bit faster
2015-04-24 18:01:25 +02:00
56836561f4
glsl: replace runtime condition by preprocessor condition
...
It might be an easier work for the compiler
I didn't replace all occurences to keep readability
2015-04-24 17:51:29 +02:00
4bb8d15228
gsdx: be more verbose on title and bandwidth debug
2015-04-24 17:13:56 +02:00
258b73409c
gsdx-ogl: update flags for buffer storage
...
Fix issue with Mesa driver
2015-04-23 21:10:43 +02:00
f6652e9a50
gsdx-ogl: disable slow and buggy code until I found a better solution
...
ogl_texture_storage 1 creates texture corruption.
Advance date is too slow, code need to be updated (properly) to uses 2 passes only not 3
Maybe one could be enough (sometimes)
2015-04-22 09:33:41 +02:00
b32f808fd4
gsdx-ogl: increase the number of pbo
...
It would cost 16MB of extra storage on the GPU but it might
reduce conflict of texture upload.
2015-04-22 00:40:38 +02:00
bd6ea17bdc
gsdx-ogl: speed improvement for DATE
...
DATE is implemented in 2 ways.
1/ with stencil
2/ purely in FS (sw)
I kept method 1 to reduce the work on method 2. It sucks for performance.
So it would be either 1 or 2.
Note: DATE has a big impact on higher upscaling
Note2: you can disable the 2nd method with this configuration parameter
override_GL_ARB_shader_image_load_store = 0
2015-04-22 00:36:34 +02:00
15dcf07b3b
revert previous commit
...
Not better, worst slower.
I'm afraid I will need proper fencing
2015-04-22 00:32:46 +02:00
8386b427ea
gsdx ogl: restore GL_MAP_COHERENT_BIT for texture upload
...
I hope to fix the texture upload corruption
I hope that impact on perf will remain small
2015-04-21 23:34:26 +02:00
19eb1f00d1
gsdx ogl: flush vbo range instead of barrier
...
For testing purpose. I don't know which one is better.
It seems flushing have less fps fluctuation than barrier.
2015-04-21 21:44:50 +02:00
ce98276322
gsdx-ogl: improve speed of vertex streaming
...
Note yet enabled because I'm afraid of data corruption but feel free to test it
The option:
ogl_vertex_storage = 1
Performance note (warm cache+gs replay on colin3)
60 fps -> 76 fps
2015-04-20 09:38:03 +02:00
62489f42f1
gsdx-ogl: add an optimization note for later
...
Only 1 byte of fog is useful
2015-04-20 07:18:09 +02:00
6d253c0b8f
glsl: fix debugging of tex coordinate in apitrace
2015-04-20 07:18:08 +02:00
31f8c065db
gsdx-ogl: implement a new hack UserHacks_UnscaleSprite for opengl
...
UserHacks_UnscaleSprite = 1 will unscale flat sprites
UserHacks_UnscaleSprite = 2 will unscale all sprites (don't work well so far)
The idea of the hack is to redo the interpolation of texture coordinate
based on the non-upscaled pixel position.
It avoids various glitches but sprites aren't upscaled anymore (so no
more anti-aliasing, potentially a coefficient can be added).
2015-04-20 07:18:08 +02:00
6124eb844e
gsdx-ogl: only compile useful VS
...
logz is a constant
wildhack is only compatbile with TME/FST
Compilation goes down from 64 to 20 vertex shaders.
2015-04-20 07:17:58 +02:00
16e6d0d305
glsl: move shader into a separate directory
...
Only keep glsl_source.h for clarity
2015-04-19 18:49:02 +02:00
55fdf26898
glsl: remove the older file tfx.glsl
2015-04-19 18:49:02 +02:00
15264c6c63
glsl: split the main shader
...
* separate VS/GS and FS
* separate subroutine part of the FS
It already complex enough without subroutine stuff. Besides I'm not sure
we will keep subroutine on the future.
2015-04-19 18:49:02 +02:00
6fc9afb175
Merge pull request #507 from PCSX2/stdcall-for-plugin
...
Stdcall for plugin
2015-04-19 18:48:32 +02:00
e605ed1d09
gsdx-queue: add a comment for the future
2015-04-17 19:12:36 +02:00
fa243afbab
gsdx SW: enable new queue && C++11 on linux/MSVC 2012+
2015-04-17 19:12:36 +02:00
d91e989abb
gsdx-queue: pass shared_ptr by reference
...
It avoids atomic +1/-1 of the reference counter
The counter is still incremented when the ptr is copyed into the queue
2015-04-17 19:12:36 +02:00
84b33d2ddb
gsdx-queue: plug the new queue as a drop-off replacement of previous boost queue
2015-04-17 19:12:36 +02:00
90794c302a
gsdx-queue: import spsc_queue of boost
...
I remove 80% of the file to only keep the ring buffer core
Same speed as boost but without the boost dependency
2015-04-17 19:12:36 +02:00
c9194301a0
gsdx-queue: (linux) add a GUI option to select the queue
2015-04-17 19:12:33 +02:00
0aac47ca59
gsdx-queue: add a new option "spin_thread" to select the queue behavior at runtime
...
If someone has a more elegant solution, feel free to share it
spin_thread = 0
spin_thread = 1 // the faster but GS thread will never stop, very bad for laptop
2015-04-17 19:03:21 +02:00
9682061472
gsdx-queue:add a new job dispatcher queue based on boost and C++11
...
It is faster on linux, it requires less code, and it is "portable"
It requires boost (only hpp files) + MSVC 2013 (for atomic) (seem doable by 2012 too)
Actually there are several queues that either use spinlock or full sleep
2015-04-17 19:03:21 +02:00
a75d78bd7e
gsdx: use standard lock_guard instead of GSAutoLock
2015-04-17 19:03:21 +02:00
9ad5933120
gsdx: Use composition insead of inheritance to support lock
...
To ease update to C++11
2015-04-17 19:03:21 +02:00
8deee6afbc
gsdx: include some C++11 define for later
2015-04-17 19:03:21 +02:00
9ce7f515bc
cdvdiso: add stdcall convention
2015-04-17 18:34:05 +02:00
5c8ea74cb9
null plugins: add stdcall convention
2015-04-17 18:33:10 +02:00
75a3abc225
lilypad: add stdcall convention
2015-04-17 18:32:39 +02:00
8e3dab7e11
zzogl: add stdcall convention
2015-04-17 18:32:10 +02:00
e16cb9a00e
onepad: add stdcall convention
2015-04-17 18:31:44 +02:00
c456764342
spu2x: declare exported function as stdcall
...
* Fix a stack buffer overflow on address sanitizer
* Might explain an old clang crash
2015-04-17 18:24:23 +02:00
545c1d387c
gsdx: add an include for MSVC
2015-04-16 22:28:09 +02:00
aff999cf69
gsdx linux: refresh the gui
...
* Use tooltip for hack
* Update string of previous hack
* Remove unused hack
Note: hack_sprite_check requires 3 states (and potentially others hack too) but
I don't know how to do it. It likely requires a "scale button"
2015-04-16 19:28:55 +02:00
85cbe285f0
gsdx dialog: move hack info into a separate file
...
This way it can be reused on linux.
2015-04-16 19:26:33 +02:00
670bcc1818
gsdx hack: use a dumb implementation for UserHacks_round_sprite_offset = 2
...
It works as bad as a "clever" implementation.
It seems to be enough for games such as venus/taisho-monoke/FFX
Note: it might creates glitches. Code will never be nice, so it is just
a trade-off
2015-04-16 19:26:33 +02:00
41e5be0673
gsdx hack: limit range of UserHacks_align_sprite_X
...
Just an extra check to avoid an overlap (avoid white line in tekken)
2015-04-16 19:26:33 +02:00
e8698a9c0c
gsdx hack: hole in vertex position also appears in !FST projection
...
Fix various black vertical line regression with UserHacks_align_sprite_X
2015-04-15 09:40:06 +02:00
65a84b9f64
gsdx hack: drop previous filtering hack
...
superseeded by UserHacks_round_sprite_offset
2015-04-15 09:26:01 +02:00
2da4a5e6bc
gsdx hack: use a 0 offset instead of -1
...
-1 is annoying because minimum value is 0. Instead to add more logic,
let's try to use 0 which seems to be good enough (fix regressions on DQ8/AT)
Unfortunately it causes a mini regression on taisho-mononoke. Rotation of sprite is done with 2 triangles.
Potentially previous value wrongly recover this section.
2015-04-14 18:39:26 +02:00
cde72300a5
gsdx hack: Correct formulae for reversed texture
...
It fixes issues on Ace Combat UI
2015-04-13 22:14:36 +02:00
418f2e69a8
gsdx-ogl: implement the wildhack on the GPU
...
Likely much faster for opengl and much easier to implement
Note: hopefully UserHacks_round_sprite_offset will replace it
2015-04-13 22:14:36 +02:00
50bac01d89
gsdx hack: disable upscaling hack at native resolution
2015-04-13 22:14:36 +02:00
815c99b6e4
gsdx-hack: remove an extra offset + duplicate linear computing
...
Initially code aligned texture on pixel boundary + 1/16th. It seems to work without it.
2015-04-13 22:14:36 +02:00
399ddbd74a
gsdx hack: reduce complexity of alpha* function
...
It will help the compiler to make a couple of optimizations (and it will help
a futur porting to GSVector)
2015-04-13 22:14:36 +02:00
1d0deb5ffe
gsdx hack: move round sprite offset into a separate function
...
Use a boolean template to separate the linear case. I'm afraid it will
cost extra computation but 90% of sprites use nearest.
2015-04-13 22:14:36 +02:00
1aebca3740
gsdx hack: m_userhacks_round_sprite_offset take precedence over m_userhacks_stretch_sprite
...
m_userhacks_stretch_sprite is only kept for debugging. Let's avoid bad mixing by users
2015-04-12 11:05:23 +02:00
c4fef0256e
gsdx hack: Better rounding fix letter in ace combat and line in tekken
...
Tekken is broken with setting UserHacks_round_sprite_offset = 2 use 1 instead.
=> game use upscaling internaly so my rounding of coordinate break everything
Yakuza uses float coordinate but this hack only correct the integer coordinate
=> the solution will be to add a dedicated hack for this game.
Colin3 got a regression but I don't know when...
2015-04-12 10:31:04 +02:00
7e89247bf4
gsdx hack: don't add extra correct for zero length texture
...
Otherwise t1-t0 is 16 instead of 0
2015-04-11 10:54:30 +02:00
d2156c86eb
gsdx: improve previous hack for bilinear sprite
...
PS2 uses a -0.5 offset before sampling so texels must be rounded to half-pixel boundary
If fixes glitches on Venus and taisho-mononoke
Note: I didn't fixed yet texture render in reverse because I don't have any test for it.
2015-04-10 09:42:39 +02:00
f5eeb2024e
gsdx: anti-glitches v3: Tester wanted
...
UserHacks_round_sprite_offset = 1 <= enable correction of flat sprites
UserHacks_round_sprite_offset = 2 <= enable correction of all sprites (better on a couple of dump but not sure of the consequence)
I completely redo the algorithm. This time I do the projection and
interpolation of the 2 extrem vertex. This way I can compute the min/max
valid texture coordinate.
It gives stronger guarantee that texture sampling will be done inside the texture.
However it might have a performance impact, likely reasonable because it
is limited to sprite vertex.
A big thanks you to all people that provide me GS dump and test reports.
2015-04-09 19:51:50 +02:00
05eb1641f2
gsdx: add glsl debug capabilities
...
Useful to debug bad texture sampling
2015-04-08 10:15:25 +02:00
98d8ad7484
gsdx: new anti-glitches upscaling hack: UserHacks_round_sprite_offset
...
It is replacement of the previous hack (UserHacks_stretch_sprite). Don't enable both in the same time!
The idea of the hack is to move the sprite to the pixel boundary. It
avoids most of rounding issue. It also rescales verticaly the sprite (avoid horizontal line on ace combat).
I don't like this rescaling maybe we can limit it to only 1 pixels.
On my limited testcase, results are much better with any upscaling factor.
I still have a bad line in Kingdom heart. If you have issue with others
game please provide us a GS dump.
2015-04-07 19:18:24 +02:00
3077de3637
Merge pull request #496 from 3descx9/master
...
crc hack for Ponkotsu Roman Daikatsugeki: Bumpy Trot ( Steambot Chronicles JP)
2015-04-07 12:04:25 +03:00
defb57178f
crc hack for Ponkotsu Roman Daikatsugeki: Bumpy Trot ( Steambot Chronicles JP)
2015-04-07 14:14:26 +05:30
506648bd6b
GSdx: Hacks UI: Add missing BREAK that I left out
2015-04-06 14:39:51 -05:00
c6fb098703
Add two new tick boxes and associated description
...
For Gregory's two new awesome hacks
Also make new hacks obey "Enable HW Hacks"
2015-04-06 13:48:59 -05:00
3c84e6848b
gsdx: don't enable previous hack if m_upscale_multiplier <= 1
2015-04-04 01:21:46 +02:00
183b5d4def
gsdx: improve UserHacks_align_sprite_X hack for ace combat
...
Game uses 1x1 texture sampling. In this condition we don't care
if texture is correctly aligned.
2015-04-03 23:00:54 +02:00
53ab390e72
gsdx linux: add a nice gui option for previous hack
...
I also added two nice tooltips :)
2015-04-03 21:25:34 +02:00
fbaa84e691
gsdx: anti-vertical-line hack UserHacks_align_sprite_X
...
This ack realign sprite to full pixel coordinate
It solves vertical line in ace combat/tekken/colin mac rally
2015-04-03 21:02:25 +02:00
e40a26be19
gsdx: add some helper to debug openGL renderer
2015-04-03 20:28:44 +02:00
5269e54f02
gsdx: tune previous hack
...
Only disable bilinear on the sprite that were forced by the user.
If the PS2 requires a bilinear filtering, there is likely a big enough texture
2015-04-03 20:09:02 +02:00
bb728ea186
gsdx linux: filtering label was in wrong oder
...
The standard mode is 2
2015-04-03 20:07:50 +02:00
d4b7410e3e
gsdx linux: add a checkbox to enable easily previous hack
2015-04-03 18:33:05 +02:00
e1a5736583
gsdx: anti-upscale-glitch hack UserHacks_SkipDraw
...
2x upscaling is pixel perfects. Bigger upscaling is better but not yet perfect
Feedbacks are welcomes (note it doesn't solve all upscaling issue, only wrong texture sampling)
For the history:
If you have a texture of [0;16[ texels and draws a primitive [0;16[
The formulae to sample last pixels of texture is
0.5 + (16*s-1)/(16*s) * 16
Native (s==1): 15.5 (good)
2x (s==2): 16 (bad, outside of the texture)
4x (s==4): 16.25 (bad, really outside of the texure))
2015-04-03 18:33:05 +02:00
22710d9b44
lilyPad: fix the linux crash if ini doesn't exist
...
All credits go to Arcum42
2015-04-03 18:33:05 +02:00
45e2fd9204
crc hack for Raw Danger! (Zettai Zetsumei Toshi 2 US)
...
thanks to ssakash for the patch
2015-03-29 15:41:06 +03:00
45930ecbf3
gsdx: value was wrongly overwritten
...
Need a lots of tests to ensure at least no regression on cache behavior
Issue #332
2015-03-17 09:39:50 +01:00
3b5367c5b7
Merge pull request #452 from turtleli/fix-linux-build-avx2-with-tsx-disabled
...
GSdx: Linux: Fix build failure on AVX2 processor with disabled TSX, enable SSE4.2, SSE4.1, SSSE3 builds
2015-03-01 17:53:21 +01:00
1222bcbf6e
GSdx: Comment out TransactionScope code
...
The TransactionScope class is compiled but never used. Comment it out
for now.
2015-03-01 16:40:48 +00:00
c1604c4b38
gsdx 🧵 only keep std::mutex/std::condition_variable
...
Keep pthread for thread until std::thread is really working
2015-03-01 17:29:40 +01:00
7f1e907616
+ Correct faulty behaviour of std thread by using native posix handle.
...
+ This is not yet perfect. Really, this standard seems like a load of crap to me in fact...
At least it works now. Should test again when gcc 5 & new c++ libs gets out.. Until then, it will do.
2015-03-01 17:29:39 +01:00
b68270ded1
Merge pull request #448 from PCSX2/lilypad-linux-port
...
Lilypad linux port
Basic support of Keyboard and Joystick
No gui to configure anything. Not well tested yet.
2015-03-01 16:52:23 +01:00
13c0e6f5ef
GSdx: Explain TransactionScope changes
2015-02-28 14:21:44 +00:00
4211d51f07
64 bits: solve various of type problems
2015-02-27 22:07:13 +01:00
f254d44030
CDVDlinuz: fix gtk header include
...
It doesn't fix GTK3 build but it allows to see the real error now.
2015-02-27 10:11:38 +01:00
329953ebc3
GSdx: Linux: Enable SSE4.2, SSE4.1 and SSE3 builds
2015-02-22 11:18:23 +00:00
9b572d2d47
GSdx: Linux: Fix AVX2 CPU build with TSX disabled
...
On Linux, CPUs with AVX2 instruction sets that have TSX disabled (by
microcode update or otherwise) fail to build GSdx. The __RTM__ macro is
undefined, with leads to the TSX RTM instruction set (_xbegin, _xend,
_xabort, etc.) being unavailable.
Modify the preprocessor check so that the RTM instructions are only used
if available.
2015-02-22 11:18:23 +00:00
330d14941f
gsdx-linux: support dump mode on linux
...
It could be useful to analyze GS dump. Warning it consumes a lot of
disk space.
2015-02-21 13:51:06 +01:00
8d76586dec
lilypad: fix windows build
...
I think lilypad used libc instead of libc++
2015-02-21 11:08:45 +01:00
642371996a
lilypad: add joy support based on linux evdev
...
I wanted to play with linux interface :)
It is far from perfect but joysticks are detected. The biggest issue is the correct generation of the config file!
2015-02-21 11:08:45 +01:00
3a2e8f38df
lilypad: removed old linux/LilyPad.cpp file
2015-02-20 23:05:21 +01:00
8350dc2c68
lilypad: remove debug printf
2015-02-20 23:05:21 +01:00
13bb1ae028
lilypad: Keep original KeyboardQueue (more ifdef)
...
It would be nice if windows support basic std::mutex
The reverse fifo queue is kept in Linux/KeyboardQueue.cpp
2015-02-20 23:05:21 +01:00
349bb810f0
lilypad: merge LilyPad.cpp (ifdef, ifdef)
...
Avoid duplication for linux
2015-02-20 23:05:21 +01:00
42b9932bd0
lilypad: add code to bind key
2015-02-20 23:05:21 +01:00
3096e94616
lilypad : plug a basic keyboard device
...
Add a reverse fifo to transfer event from core to plugin
Long story short, on linux there is only one event queue in core
2015-02-20 23:05:21 +01:00
aec43f0bee
lilypad: add x11 display pointer
...
If we move all window management hack into the core it would be useless (for input)
2015-02-20 23:05:21 +01:00
087f252909
lilypad: add plumbering config
...
Note: it miss interaction with any dialog
2015-02-20 23:05:21 +01:00
4f013a2960
lilypad: import common utility to manage config
...
Based work on spu2x equivalent file. Only convert the file to a CfgHelper object
2015-02-20 23:05:21 +01:00
156f66ef62
lilypad: make it compile on linux
...
* Ifdef windows code
* Add a windows crap to linux crap translation layer
2015-02-20 23:05:21 +01:00
3661f51bcb
lilypad: minor c++ fixes
...
Must be checked on windows
2015-02-20 23:05:21 +01:00
147353a177
lilypad: add cmake file
2015-02-20 23:05:21 +01:00
76ff56a4e3
lilypad: add a linux fork
...
Yes it is bad!
2015-02-20 23:05:21 +01:00
1655055f61
onepad: update old comment
2015-02-20 23:05:21 +01:00
e0f56282de
cmake: no preferred-stack-option in asan
...
It conflicts with the global definition
I don't remember why this option was set on GSdx. Potentially it could be dropped (or fixed correctly)
Anyway, it will help to enable Address Sanitizer on Linux Build
2015-02-20 19:44:51 +01:00
80b24f8055
Fix warped read code
2015-01-27 15:16:06 +00:00
0bdeb8d411
Merge pull request #430 from PCSX2/win-ocl-crash-fix
...
gsdx ocl: check size of array before access
2015-01-17 12:05:52 +01:00
6bb945f6c8
Merge pull request #428 from pgert/master
...
Case Mapping & GitHub instead of GoogleCode.
2015-01-16 21:25:36 +01:00
70ad09f6ef
gsdx ocl: check size of array before access
...
Potential fix for issue #408 ?
2015-01-16 09:39:50 +01:00
ad8e800aa5
Update Cfg.c
2015-01-12 13:27:09 +01:00
446977d126
GSdx forward compatible bit
2015-01-09 19:39:59 -06:00
c8c22cf6a0
Notify about cross build option upon failure.
...
Tell the user to use CMAKE_TOOLCHAIN_FILE upon failure.
.
Cleanup detectOperatingSystem. Should be the same but adding
GNU and kFreeBSD from Debian and filtering out pre OS X Apple.
.
libaio is linux only. Also check for the correct header since
aio.h is the POSIX one. Both are in /usr/include/ anyway.
Only build core if (Linux AND NOT AIO_FOUND) == false.
.
Use Unix for GTK and X11. Macs has gtk-quartzs and xquartz or native X11.
*BSD, linux, etc should have both.
2015-01-03 14:51:04 +01:00
ee34bd724f
gsdx ocl: avoid a crash if ocl is selected but not enabled
2014-12-23 19:39:02 +01:00
767b841fea
gsdx ocl: disable it on windows
...
Until we found a way to fix a couple of crashes
2014-12-22 19:02:35 +01:00
66d7aa75e2
cmake: move -DNDEBUG to global option
2014-12-20 13:43:25 +01:00
a99f3ea321
cmake: remove duplicate flags
...
also use the lighter elseif structure to reduce a bit the size of cmakefile
2014-12-20 13:43:25 +01:00
4773bcf0ea
cmake: s/_LINUX/__linux__/
2014-12-20 10:54:24 +01:00
4f957feacd
onepad: use union instead of stange cast
...
Nicer this way. Beside it removes the strict aliasing issue.
2014-12-20 10:54:18 +01:00
43e854fece
spu2x: remove duplicated function
2014-12-20 10:54:18 +01:00
ff24a5f702
gsdx linux: disable std::thread
...
Threads are not killed properly therefore GS crashes on reloading (aka F9)
See issue #392
2014-12-14 12:22:40 +01:00
b9297c6158
Merge pull request #377 from PCSX2/tlb_goemon_v2
...
goemon gamefix improvement
2014-12-14 11:47:37 +01:00
63ba78b664
remove zzogl-pg-cg
...
superseeded by zzogl-pg
2014-12-13 12:28:37 +01:00
7d21497c11
clang: no support of f-abi-version=6 option
2014-12-13 12:28:37 +01:00
18405e2598
gsdx: add goemon comment on some assertion
...
If someone want to trigger them
2014-12-12 22:31:31 +01:00
cebccea81c
gsdx: disable some gl extensions when VMware driver is detected
...
It is likely the Mesa driver, code seems to have the same issue (separate shader)
2014-12-12 20:44:58 +01:00
35f26f00bc
Merge pull request #386 from PCSX2/remove-tls
...
spu2x:zzogl: disable TLS
2014-12-11 09:55:17 +01:00
3d071e50ad
gtk3: gtk_hscale_new_with_range => gtk_scale_new_with_range
2014-12-10 22:09:21 +01:00
5d8b2d8044
gtk2: GtkNotebookPage is useless
...
And not supported by gtk3
2014-12-10 22:09:21 +01:00
e9233f4698
gtk2: use text rather than image
...
Require by GTK3
2014-12-10 22:09:21 +01:00
7fb548d7c5
gtk2: GTK_OBJECT is useless
2014-12-10 22:09:21 +01:00
d1389db2f4
gtk2: keyboard macro update
2014-12-10 22:09:21 +01:00
ba9e998ff5
gtk2: port gtk_combo_box to gtk_combo_box_text
...
The former was deprecated on gtk2.24 (and removed from gtk3)
2014-12-10 22:09:21 +01:00
a52f598369
spu2x:zzogl: disable TLS
...
builds an Utilies_NO_TLS.a archive of the common Utilities code. It replaces native TLS by a slower reimplementation
Rational: number of TLS slot is very limited by the GLIBc on linux. I hope it doesn't impact performance.
* Zzogl don't requires TLS AFAIK
* spu2x will likely use it for assertions only.
TLS exhaustion creates issue to dlopen plugins
issue #384 : https://github.com/PCSX2/pcsx2/issues/384
But also for profiled build (-fprofile-generate)
http://forums.pcsx2.net/Thread-WORKAROUND-build-with-fprofile-generate
If someone have a better idea, please raise your hand!
2014-12-08 22:26:46 +01:00
0a4f9e43d9
cmake: clean sdl management
...
* sdl is mandatory for spu2x
* cmake will include either /usr/include/SDL or /usr/include/SDL2 so no
need to add extra ifdef
2014-12-07 21:06:21 +01:00
29a14f5667
sed -i -e 's/seperately/separately/'
...
Thanks micove again
2014-12-07 12:46:16 +01:00
c945aead54
cmake: better support of SDL2
...
Description: Building with SDL2_API=TRUE is incomplete
SDL_FOUND does not imply SDL2_FOUND
Use check_libs for detection
Only include ${SDL_INCLUDE_DIR} when needed
Use SDL2_LIBRARIES
Author: Miguel A. Colón Vélez
Gregory: add back SDL_BUILDING_LIBRARY
2014-12-07 12:19:14 +01:00
16284d0a59
gsdx: fix a couple of typo
...
From @micove
2014-12-07 12:12:53 +01:00
070dce4c83
Merge pull request #356 from PCSX2/issue-fixes
...
various bug-tracker fixes
2014-12-06 19:48:13 +01:00
1f5fe7a1db
Merge pull request #348 from 3kinox/master
...
GSdx-ogl linux: std::thread
2014-12-02 22:43:29 +01:00
4238261784
gsdx-cl: update linux menu config
...
Try to use some id to be more robust
The best will be to sort the array first
2014-12-02 00:16:35 +01:00
76f719e5d0
gsdx-ocl: Add a ENABLE_OPENCL option
...
* Allow to compile GSdx on linux without opencl yet.
2014-12-02 00:16:35 +01:00
b9b02cf749
implemented opencl program caching on disk under the system default temp folder, needs some additional work on linux
2014-12-02 00:16:35 +01:00
7b466a98d0
replaced opencl.def with dynamic dll loading, god bless search and replace
2014-12-02 00:16:35 +01:00
e3ba15de94
opencl device selection in settings dialog
2014-12-02 00:16:34 +01:00
6f5cd1cd4d
joined some tfx kernel calls, general speed up in most games
2014-12-02 00:16:34 +01:00
3d2b0e3766
minor opencl kernel optimizations
2014-12-02 00:16:34 +01:00
72cfc6a6ef
3rdparty/opencl
2014-12-02 00:16:34 +01:00
9e20387595
Modified for opencl 1.1. While it runs on nvidia cards now, you can't use its sdk to compile gsdx, cl.hpp is missing there. Intel or amd is ok.
2014-12-02 00:16:34 +01:00
263c097d13
solution for 32-bit z values in opencl and other minor optimizations
2014-12-02 00:16:34 +01:00
c64f9ad9b1
squishing opencl bugs, there aren't many left hopefully
2014-12-02 00:16:34 +01:00
ba1e522bbb
Less opencl bugs, some games are actually playable now, there are still texture errors.
2014-12-02 00:16:34 +01:00
881735b562
minor merging errors
2014-12-02 00:16:33 +01:00
db7c26cde7
- Experimental OpenCL renderer (missing features: point, line, texture cache, mipmap, aa1, device selection). Needs any OpenCL SDK for the common headers and stub lib to compile, tested with AMD and Intel. Too bad it is not part of the Windows SDK yet.
...
- Renumbered renderer ids, compatible with old numbering, but it does not follow the mod3 logic anymore.
2014-12-02 00:16:33 +01:00
1b555ea3b5
gsdx-linux: Fix GSdx internal counter on linux
...
The issue is that clock gives the total cpu time of the process whereas
we want the cpu time of the rendering thread
2014-11-24 23:44:32 +01:00
732cbc3ad5
GSDX-ogl linux:
...
+ Implement threads/mutex using std::thread/std::mutex/std::condition_variable
+ Old implementation can be used by commenting out the "define _STD_THREAD_ in GSThread.h
+ Commit should be much cleaner than previous one.
2014-11-23 14:33:35 +01:00
60c0eb7179
gsdx-ogl: windows: properly setup context flags
...
* Use a core profile context
* Only enable the debug context in debug build
Close issue #353
2014-11-20 22:12:30 +01:00
d21e6ff45f
gsdx-ogl: don't declare a sampler variable
...
Nvidia was complaining on the fxaa shader. In doubt I also replaced it in Asmodean's shader
2014-11-20 22:07:44 +01:00
8f42b36a42
It might help if I changed this for d3d9 also :p
2014-11-15 21:40:00 +00:00
5b3867dd60
GSdx: change post-processing directory & name.
2014-11-15 21:33:23 +00:00
276e3d9d1b
gsdx-ogl: always set texture parameter
...
* Avoid bug after a pause
* Not faster anyway
* keep old method only for gl retracer to reduce debugging noise
Remove some old&useless comment
2014-11-14 11:43:42 +01:00
3311336d0e
gsdx-ogl: disable ARB_bindless_texture
...
I have a crash when I try to delete some texture (for example when the simulator is paused)
2014-11-11 23:45:41 +01:00
b6a951a9fa
gsdx: debug compilation fix
...
I'm not sure gcc behavior is correct here!
2014-11-11 20:54:34 +01:00
0ca9bab8b6
Merge pull request #344 from Asmodean-/master
...
[GSdx] OpenGL PP Updates
2014-11-11 16:14:01 +01:00
ab4eaea757
Merge pull request #346 from 3kinox/master
...
Linux : GSdx AVX fix
2014-11-11 16:08:23 +01:00
06f53b2689
use -fabi_version=6 only for GSdx, solve bug with wxwidget
...
reenable avx build for GSdx
2014-11-11 15:55:31 +01:00
e73d8f383b
gsdx-ogl: compilation fix for old distribution
2014-11-11 15:01:22 +01:00
b60e5a62fc
Rearrange to right spot (I blame github editor ;p)
2014-11-11 00:17:21 +00:00
7adc7c4833
Update GSSettingsDlg.cpp
...
Just add the OGL shader ini params to the file when the user enables post-processing In the options dialog.
2014-11-11 00:01:31 +00:00
e6e534c13a
Merge pull request #343 from PCSX2/shader-loading
...
GSdx ogl: external shader loading + FXAA
2014-11-10 15:43:05 +01:00
48b3d91768
partially revert previous commit ec1da2805c
...
It breaks windows...
2014-11-10 12:19:30 +01:00
8c90e7cafc
gsdx-ogl: support latest fxaa version
...
Only tested on Nvidia, please report any issue with your driver
Note: requires GL4 GPU
2014-11-10 10:39:55 +01:00
ff39dffe23
gsdx-ogl: add a gui option (linux) to select external shader
...
Note: of course it requires a glsl shader ;)
On windows, you can set the path on the ini file. Here an example with linux path:
shaderfx_conf = /home/gregory/playstation/emulateur/pcsx2_merge/bin/GSdx_FX_Settings.ini
shaderfx_glsl = /home/gregory/playstation/emulateur/pcsx2_merge/bin/shader.fx
2014-11-10 10:38:52 +01:00
920ac6695f
gsdx-ogl: add preliminary support of external shader fx
2014-11-10 10:37:58 +01:00
ec1da2805c
pcsx2/GSdx: disable AVX for the moment on linux
...
I need to check carefully the consequence of ABI change. So far wx is very unhappy!
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6),
and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1006,wx containers,compatible with 2.6).
2014-11-09 15:45:54 +01:00
84f844767c
gsdx-ogl: micro optimize PSConstantBuffer cache
...
Might help to save a cache line on the CPU :)
2014-11-08 21:39:17 +01:00
58bd645d49
gsdx-ogl: BindBufferBase also bind to the generic binding point
2014-11-08 21:39:13 +01:00
16377f7249
gsdx-ogl: only call PixelStorei when parameters are updated
...
It won't improve performance but it would reduce a bit the noise in gl retracer tool
2014-11-08 21:30:14 +01:00
47f40ed79a
gsdx-ogl: reduce pbo complexity
...
Copy the full line into the pbo. Dma will only take GL_UNPACK_ROW_LENGTH
- increase memcpy size by 2 in the pbo
+ single memcpy will be faster and can use sse
Enable buffer_storage extension:
* GL_CLIENT_STORAGE_BIT was required (it is the duty of TexSubImage to copy data into the GPU mem)
* Enable the extension by default
2014-11-08 21:30:14 +01:00
e62af05496
gsdx-ogl: reduce complexity of clear texture
...
Null is equivalent to a clear to 0.
Note: Code is not yet used because both stencil and depth are cleared.
Future note: stencil can potentially be replaced by load_store_image
2014-11-08 21:30:14 +01:00
bd9df9a6ec
gsdx: Add some comment on GSTextureCache + schematics
...
Note: docs/TextureCache.odg was created with libreoffice. Not perfect but give a nice overview
2014-11-08 21:30:14 +01:00
b7e5e41afe
Merge pull request #333 from PCSX2/linux-avx
...
Support of AVX build for linux
2014-11-08 14:09:06 +01:00
8434d6c397
Merge pull request #328 from tlbjr/master
...
GLDEBUGPROC type cast and postBuild.cmd for GSdx on VS2013
2014-11-08 13:11:07 +01:00
df0a9c4683
Some small fixes, that I noticed.
2014-11-06 10:56:33 +00:00
937e475169
[Post-Processing] Update GSdx FX effect suite to latest version.
2014-11-03 07:15:34 +00:00
f25e056914
gsdx: enable AVX with GCC
...
* Use overloaded function instead of specialized template
=> see http://stackoverflow.com/questions/3052579/explicit-specialization-in-non-namespace-scope
* replace _mm256_slli_si128 by _mm256_slli_si256
I hope they're equivalent. I didn't find any info on _mm256_slli_si128,
however srl use _mm256_srli_si256
2014-10-26 14:47:35 +01:00
679fa65b84
cmake: By default optimize for current arch
...
Note: it requires GCC 4.7. Otherwise use -DDISABLE_ADVANCE_SIMD=OFF to restore
previous behavior. It will impact Ubuntu precise (12.04)
2014-10-26 14:47:35 +01:00
a1a1c7d0fb
Removed svn rev inc file
2014-10-12 01:43:30 -07:00
1f734a69a0
Small VS2013 fixes
2014-10-12 01:40:40 -07:00
fa3db52cf7
partially revert commit 9fd2f3dd8a
...
No need to add Linux sillyness in Windows file... (Hopefully close #323 )
2014-10-04 11:33:34 +02:00
6fe9ee387d
gsdx-ogl: optimize the PS cb cache
...
* Don't use the stack
* Don't compare MinMax parameter (depends of others)
* Don't store not-compared parameter in the cache (HalfTexel/MinMax)
+0.3fps/46fps (well better than nothing)
2014-10-02 20:44:22 +02:00
a573ce185c
gsdx-ogl: mark GL_EXT_shader_io_blocks as mandatory for GLES
2014-10-02 20:44:22 +02:00
ccc1137e12
gsdx-ogl: merge the two vertex buffer format
...
* Only a single VAO
=> Format is set once
=> Only a single bind at startup
=> GSVertexBufferStateOGL is nearly useless
=> barely faster but better than nothing :)
2014-10-02 20:44:22 +02:00
10c7be8c50
gsdx-ogl: Use 32B strides for all VBO
2014-10-02 20:44:22 +02:00
d37cc8e1e7
gsdx-ogl: GL_ARB_shading_language_420pack is now mandatory
...
All API/drivers support it so time to remove the fallback.
2014-10-02 20:44:22 +02:00
b98e53e059
Minor spelling/punctuation fixes in SPU2-X
2014-10-02 12:35:13 +02:00
79e8a912cd
gsdx-ogl: keep the draw buffer enabled by default
...
Note: Only DATE requires to disable the draw buffer
2014-09-30 22:18:20 +02:00
f46e8cc6ac
gsdx-ogl: bump base requirement to 3.3
...
A couple of fallbacks were introduced for the Mesa driver that only support 3.0
DSA will require a recent Mesa which already support GL3.3
Require at least SandyBridge for Intel GPU
2014-09-30 22:18:20 +02:00
594f6c33a2
gsdx-ogl-ES: require GL_EXT_shader_io_blocks + GLES3.1
...
Allow to use same shader interface for all API
Note: on the GL API it will require GL3.3 (see next commit)
2014-09-30 22:18:01 +02:00
1c501047f5
gsdx-ogl: refresh the linux gui with latest extension
2014-09-28 12:23:44 +02:00
8833afc2fa
gsdx-ogl: drop GL_ARB_multi_bind
...
It will be replaced by DSA so let's reduce the complexity of opengl
2014-09-28 12:23:44 +02:00
fa43018d10
gsdx-ogl: no DSA isn't mandatory yet...
2014-09-28 12:11:22 +02:00
1e86e3cb08
gsdx-ogl: rework callback debug
...
* use DebugOutputToFile as a callback of gl error. Add a breakpoint to
find the culprit GL call
* use string instead of char[n]
Note: CheckDebugLog is potentially useless now
2014-09-28 12:00:34 +02:00
b7601a9add
gsdx-ogl: Enable various GL4+ extensions
...
* GL_ARB_clip_control: reduce z fighting
* GL_ARB_clear_texture: no real speed gain (but improve code quality)
* GL_ARB_bindless_texture: +1fps (if you're CPU limited)
2014-09-28 12:00:34 +02:00
9d8d702aa6
gsdx-ogl: drop GL_NV_depth_clamp extension
...
superseeded by GL_ARB_clip_control
2014-09-28 12:00:34 +02:00
4659184cc1
gsdx-ogl: add support of clip_control (depth only)
...
* replace the [-1;1] depth range of openGL with the DX range [0;1].
2014-09-28 12:00:34 +02:00
104688e3ee
gsdx-ogl: fix ARB_bindless support
2014-09-28 12:00:34 +02:00
cc24da128c
gsdx-ogl: fix for gl_clear_texture
...
Note: Disabled for depth_stencil texture (I'm not sure we can split the two)
2014-09-28 12:00:34 +02:00
d720cc16a6
gsdx-ogl: gl4.5: add plumbering to support direct_state_access and clip_control
2014-09-28 12:00:33 +02:00
5b3f031654
cmake: fix commit f3a50a01a7
...
* link common with c lib (required for gold linker)
* fix the macro to properly set the library variable
=> use the variable instead to hardcoded value
2014-09-24 09:02:56 +02:00
58a8683d7d
gsdx-ogl: disable texture compare mode
...
It seems to be used for depth texture
2014-09-22 09:27:34 +02:00
d51f008c72
gsdx: openglES fix
...
* require a 3.1 context
* unattach texture of the fbo when they're not used
(avoid to have a texture and depth_stencil with different size)
Note: except minor shader bug it works on Nvidia 340.23.01
2014-09-22 09:27:31 +02:00
9fd2f3dd8a
Don't use build date on openSUSE.
...
Fixes RPMLINT warning:
pcsx2.i586: W: file-contains-date-and-time /usr/bin/pcsx2
Your file uses __DATE and __TIME__ this causes the package to rebuild when not needed
2014-09-17 22:37:34 +02:00
7b1d3ba7ea
Do commits 2bc2047 and f287754 the right way ...
2014-09-16 19:11:11 +02:00
2bc2047770
cmake: Fix RPATH/RUNPATH issue with openSuse wxWidgets libdir.
...
Gregory: Add an if clause to only change the rpath on openSuse
For me it doesn't follow the FHS => http://www.tldp.org/HOWTO/HighQuality-Apps-HOWTO/fhs.html
2014-09-14 13:12:26 +02:00
98d22f8b2e
Merge pull request #215 from xsacha/memcpy
...
Remove some slow, redundant memcpy implementations: memcpy_const/memcpy_...
2014-09-12 19:57:57 +02:00
2d4b6273f0
Merge pull request #276 from xsacha/defs-cleanup
...
pcsx2: require C99 standard for stdint
2014-09-12 19:24:08 +02:00
f3a50a01a7
cmake: Use previous macros in CMakeLists.txt files
...
Gregory: add a c lib for zzogl-pg-cg replayer
2014-09-05 20:16:23 +02:00
1d116cc23b
Remove memcpy_amd usages from plugins. No more custom implementations in plugins.
2014-08-27 13:50:55 +10:00
ad3b76c4d8
Remove all custom memcpy usage from core pcsx2 and remove memcpy_fast from plugins.
2014-08-27 13:45:23 +10:00
90e59b2704
Clean up the type defines in pcsx2.
...
The non-stdint fallback was not even working which shows that it was never used. No supported platform would not have stdint anyway.
Remove unused code and do not restrict types to Linux and MSVC. Was there a reason for this?
2014-08-25 16:16:34 +10:00
15c487e547
GSdx: fixed use of separate shader objects for Intel driver.
2014-08-23 17:09:38 +02:00
2ba0b1b76b
Use posix_memalign and _aligned_malloc for alignment. Remove unused code.
2014-08-17 21:03:43 +10:00
f542c7232e
Use __builtin_unreachable where possible for non-msvc
2014-08-15 14:43:52 +10:00
7568f6f2ec
Remove deprecated jASSUME from pcsx2 core. It is still used in some plugins
2014-08-15 14:32:56 +10:00
1facc8efbc
Merge pull request #225 from lioncash/ghz-macro
...
cdvdGigaherz: Remove an unnecessary macro
2014-08-15 02:10:32 +02:00
b2d8e7137f
cdvdGigaherz: Remove an unnecessary macro define
2014-08-14 20:07:10 -04:00
cb2593f2bb
Merge pull request #210 from xsacha:plugin_cleanup
...
Some cleanup to improve readability.
2014-08-14 20:37:41 +01:00
66765d827b
Merged pull request #199 from xsacha/oldcode
...
Remove some horrible old code.
2014-08-14 19:12:19 +01:00
2ae3dd970a
Fix case of 'soundtouch' instead of creating a symlink as a workaround.
2014-08-13 18:54:31 +10:00
a3bc6a73a3
Remove some horrible old code.
...
Remove an assert define and instead use the static_assert that all compilers provide.
As an added bonus, assert messages\!
2014-08-13 13:55:32 +10:00
Gregory Hainaut