Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU
since it concerns the external debug interface for JTAG, but is
mandatory in Armv8.8 implementations, hence it is reported as supported
in the ID registers.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the initialization of the debug ID registers to aa32_max_features,
which is used to set the 32-bit ID registers. This ensures that the
debug ID registers are consistently set for the max CPU in a single
place.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-3-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MLA, MLS, SQDMULH, SQRDMULH, were converted with 8db93dcd3d
and f80701cb44, and this code should have been removed then.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The inner loop, bounded by eltspersegment, must not be
larger than the outer loop, bounded by elements.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
host_cpu_realizefn() sets CPUID_EXT_MONITOR without consulting host/KVM
capabilities. This may cause problems:
- If MWAIT/MONITOR is not available on the host, advertising this
feature to the guest and executing MWAIT/MONITOR from the guest
triggers #UD and the guest doesn't boot. This is because typically
#UD takes priority over VM-Exit interception checks and KVM doesn't
emulate MONITOR/MWAIT on #UD.
- If KVM doesn't support KVM_X86_DISABLE_EXITS_MWAIT, MWAIT/MONITOR
from the guest are intercepted by KVM, which is not what cpu-pm=on
intends to do.
In these cases, MWAIT/MONITOR should not be exposed to the guest.
The logic in kvm_arch_get_supported_cpuid() to handle CPUID_EXT_MONITOR
is correct and sufficient, and we can't set CPUID_EXT_MONITOR after
x86_cpu_filter_features().
This was not an issue before commit 662175b91f ("i386: reorder call to
cpu_exec_realizefn") because the feature added in the accel-specific
realizefn could be checked against host availability and filtered out.
Additionally, it seems not a good idea to handle guest CPUID leaves in
host_cpu_realizefn(), and this patch merges host_cpu_enable_cpu_pm()
into kvm_cpu_realizefn().
Fixes: f5cc5a5c16 ("i386: split cpu accelerators from cpu.c, using AccelCPUClass")
Fixes: 662175b91f ("i386: reorder call to cpu_exec_realizefn")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This code was using both uint32_t and uint64_t for len.
Consistently use size_t instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240626194950.1725800-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not rely on finish->id_auth_uaddr, so that there are no casts from
pointer to uint64_t. They break on 32-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the "id_auth" name for the binary version of the data.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not rely on finish->id_block_uaddr, so that there are no casts from
pointer to uint64_t. They break on 32-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the "id_block" name for the binary version of the data.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle it like the other arithmetic cc_ops. This simplifies a
bit the implementation of bit test instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is the only CCOp, among those that compute ZF from one of the cc_op_*
registers, that uses cpu_cc_src. Do not make it the odd one off,
instead use cpu_cc_dst like the others.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
POPCNT was missing, and the entries were all out of order after
ADCX/ADOX/ADCOX were moved close to EFLAGS. Just use designated
initializers.
Fixes: 4885c3c495 ("target-i386: Use ctpop helper", 2017-01-10)
Fixes: cc155f1971 ("target/i386: rewrite flags writeback for ADCX/ADOX", 2024-06-11)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level. We
can invoke trigger_common_match() to check the privilege levels of the
type 3 triggers.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-4-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level.
Remove the related code in riscv_cpu_debug_check_watchpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the watchpoints.
This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.
Only load/store bits and loaded/stored address should be further checked
in riscv_cpu_debug_check_watchpoint().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-3-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISC-V Debug specification version 0.13 [1] (also applied
to version 1.0 [2] but it has not been ratified yet), there are several
common matching conditions before firing a trigger, including the
enabled privilege levels of the trigger.
This commit adds trigger_common_match() to prepare the common matching
conditions for the type 2/3/6 triggers. For now, we just implement
trigger_priv_match() to check if the enabled privilege levels of the
trigger match CPU's current privilege level.
Remove the related code in riscv_cpu_debug_check_breakpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the breakpoints.
This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.
Only the execution bit and the executed PC should be futher checked in
riscv_cpu_debug_check_breakpoint().
[1]: https://github.com/riscv/riscv-debug-spec/releases/tag/task_group_vote
[2]: https://github.com/riscv/riscv-debug-spec/releases/tag/1.0.0-rc1-asciidoc
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-2-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the old-fashioned extension auto-update check statements as
they are replaced by the extension implied rules.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-7-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zc extension has special implied rules that need to be handled separately.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-6-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add multi extension implied rules to enable the implied extensions of
the multi extension recursively.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add MISA extension implied rules to enable the implied extensions
of MISA recursively.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduce helpers to enable the extensions based on the implied rules.
The implied extensions are enabled recursively, so we don't have to
expand all of them manually. This also eliminates the old-fashioned
ordering requirement. For example, Zvksg implies Zvks, Zvks implies
Zvksed, etc., removing the need to check the implied rules of Zvksg
before Zvks.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCVCPUImpliedExtsRule is created to store the implied rules.
'is_misa' flag is used to distinguish whether the rule is derived
from the MISA or other extensions.
'ext' stores the MISA bit if 'is_misa' is true. Otherwise, it stores
the offset of the extension defined in RISCVCPUConfig. 'ext' will also
serve as the key of the hash tables to look up the rule in the following
commit.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240625114629.27793-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When icount is enabled, rather than returning the virtual CPU time, we
should return the instruction count itself. Add an instructions bool
parameter to get_ticks() to correctly return icount_get_raw() when
icount_enabled() == 1 and instruction count is queried. This will modify
the existing behavior which was returning an instructions count close to
the number of cycles (CPI ~= 1).
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240618112649.76683-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
helper_froundnx_h function mistakenly uses single percision nanbox
check instead of the half percision one. This patch fixes the issue.
Signed-off-by: Branislav Brzak <brzakbranislav@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240608214546.226963-1-brzakbranislav@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on the priv-1.13.0, add the exception codes for Software-check and
Hardware-error.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-6-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on privileged spec 1.13, the RV32 needs to implement MEDELEGH
and HEDELEGH for exception codes 32-47 for reserving and exception codes
48-63 for custom use. Add the CSR number though the implementation is
just reading zero and writing ignore. Besides, for accessing HEDELEGH, it
should be controlled by mstateen0 'P1P13' bit.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-5-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on privilege 1.13 spec, there should be a bit56 for 'P1P13' in
mstateen0 that controls access to the hedeleg.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-4-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add macros and variables for RISC-V privilege 1.13 support.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-3-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Public the conversion function of priv_spec in cpu.h, so that tcg-cpu.c
could also use it.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-2-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the breakpoint belongs to the userspace then set the ret value.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606014501.20763-3-duchao@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch implements insert/remove software breakpoint process.
For RISC-V, GDB treats single-step similarly to breakpoint: add a
breakpoint at the next step address, then continue. So this also
works for single-step debugging.
Implement kvm_arch_update_guest_debug(): Set the control flag
when there are active breakpoints. This will help KVM to know
the status in the userspace.
Add some stubs which are necessary for building, and will be
implemented later.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606014501.20763-2-duchao@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISC-V crypto spec, Zvkb extension is a
subset of the Zvbb extension [1].
1: 1769c2609b/doc/vector/riscv-crypto-vector-zvkb.adoc?plain=1#L10
Signed-off-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240528130349.20193-1-jerry.zhangjian@sifive.com>
[ Changes by AF:
- Tidy up commit message
- Rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu maps IRQs 0:15 for core interrupts and 16 onward for
guest interrupts which are later translated to hgiep in
`riscv_cpu_set_irq()` function.
With virtual IRQ support added, software now can fully
use the whole local interrupt range without any actual
hardware attached.
This change moves the guest interrupt range after the
core local interrupt range to avoid clash.
Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.")
Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.")
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240520125157.311503-3-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
AIA extends the width of all IRQ CSRs to 64bit even
in 32bit systems by adding missing half CSRs.
This seems to be missed while adding support for
virtual IRQs. The whole logic seems to be correct
except the width of the masks.
Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.")
Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.")
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240520125157.311503-2-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add missing include guard comment to gdbstub.h
- move gdbstub enums into separate header
- move qtest_[get|set]_virtual_clock functions
- allow plugins to manipulate the virtual clock
- introduce an Instructions Per Second plugin
- fix inject_mem_cb rw mask tests
- allow qemu_plugin_vcpu_mem_cb to shortcut when no memory cbs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmZ5OjoACgkQ+9DbCVqe
KkQPlwf/VK673BAjYktuCLnf3DgWvIkkiHWwzBREP5MmseUloLjK2CQPLY/xWZED
pbA/1OSzHViD/mvG5wTxwef36b9PIleWj5/YwBxGlrb/rh6hCd9004pZK4EMI3qU
53SK8Qron8TIXjey6XfmAY8rcl030GsHr0Zqf5i2pZKE5g0iaGlM3Cwkpo0SxQsu
kMNqiSs9NzX7LxB+YeuAauIvC1YA2F/MGTXeFCTtO9Beyp5oV7oOI+2zIvLjlG5M
Z5hKjG/STkNOteoIBGZpe1+QNpoGHSBoGE3nQnGpXb82iLx1KVBcKuQ6GoWGv1Wo
hqiSh9kJX479l0mLML+IzaDsgSglbg==
=pvWx
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-june24-240624-1' of https://gitlab.com/stsquad/qemu into staging
maintainer updates (plugins, gdbstub):
- add missing include guard comment to gdbstub.h
- move gdbstub enums into separate header
- move qtest_[get|set]_virtual_clock functions
- allow plugins to manipulate the virtual clock
- introduce an Instructions Per Second plugin
- fix inject_mem_cb rw mask tests
- allow qemu_plugin_vcpu_mem_cb to shortcut when no memory cbs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmZ5OjoACgkQ+9DbCVqe
# KkQPlwf/VK673BAjYktuCLnf3DgWvIkkiHWwzBREP5MmseUloLjK2CQPLY/xWZED
# pbA/1OSzHViD/mvG5wTxwef36b9PIleWj5/YwBxGlrb/rh6hCd9004pZK4EMI3qU
# 53SK8Qron8TIXjey6XfmAY8rcl030GsHr0Zqf5i2pZKE5g0iaGlM3Cwkpo0SxQsu
# kMNqiSs9NzX7LxB+YeuAauIvC1YA2F/MGTXeFCTtO9Beyp5oV7oOI+2zIvLjlG5M
# Z5hKjG/STkNOteoIBGZpe1+QNpoGHSBoGE3nQnGpXb82iLx1KVBcKuQ6GoWGv1Wo
# hqiSh9kJX479l0mLML+IzaDsgSglbg==
# =pvWx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 02:19:54 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
* tag 'pull-maintainer-june24-240624-1' of https://gitlab.com/stsquad/qemu:
accel/tcg: Avoid unnecessary call overhead from qemu_plugin_vcpu_mem_cb
plugins: fix inject_mem_cb rw masking
contrib/plugins: add Instructions Per Second (IPS) example for cost modeling
plugins: add migration blocker
plugins: add time control API
qtest: move qtest_{get, set}_virtual_clock to accel/qtest/qtest.c
sysemu: generalise qtest_warp_clock as qemu_clock_advance_virtual_time
qtest: use cpu interface in qtest_clock_warp
sysemu: add set_virtual_time to accel ops
plugins: Ensure register handles are not NULL
gdbstub: move enums into separate header
include/exec: add missing include guard comment
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is an experiment to further reduce the amount we throw into the
exec headers. It might not be as useful as I initially thought because
just under half of the users also need gdbserver_start().
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
The oldest model that IBM still supports is the z13. Considering
that each generation can "emulate" the previous two generations
in hardware (via the "IBC" feature of the CPUs), this means that
everything that is older than z114/196 is not an officially supported
CPU model anymore. The Linux kernel still support the z10, so if
we also take this into account, everything older than that can
definitely be considered as a legacy CPU model.
For downstream builds of QEMU, we would like to be able to disable
these legacy CPUs in the build. Thus add a CONFIG switch that can be
used to disable them (and old machine types that use them by default).
Message-Id: <20240614125019.588928-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The pid field of prstatus needs to be big endian like all of the other
fields.
Fixes: f738f296ea ("s390x/arch_dump: pass cpuid into notes sections")
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <5929f76d536d355afd04af51bf293695a1065118.1718771802.git.osandov@osandov.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
util/bufferiszero: Split out host include files
util/bufferiszero: Add loongarch64 vector acceleration
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZzRoMdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Y7gf/ZUTGjCUdAO7W7J5e
Z3JLUNOfUHO6PxoE05963XJc+APwKiuL6Yo2bnJo6km7WM50CoaX9/7L9CXD7STg
s3eUJ2p7FfvOADZgO373nqRrB/2mhvoywhDbVJBl+NcRvRUDW8rMqrlSKIAwDIsC
kwwTWlCfpBSlUgm/c6yCVmt815+sGUPD2k/p+pIzAVUG6fGYAosC2fwPzPajiDGX
Q+obV1fryKq2SRR2dMnhmPRtr3pQBBkISLuTX6xNM2+CYhYqhBrAlQaOEGhp7Dx3
ucKjvQFpHgPOSdQxb/HaDv81A20ZUQaydiNNmuKQcTtMx3MsQFR8NyVjH7L+fbS8
JokjaQ==
=yVKz
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240619' of https://gitlab.com/rth7680/qemu into staging
tcg/loongarch64: Support 64- and 256-bit vectors
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
util/bufferiszero: Split out host include files
util/bufferiszero: Add loongarch64 vector acceleration
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZzRoMdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Y7gf/ZUTGjCUdAO7W7J5e
# Z3JLUNOfUHO6PxoE05963XJc+APwKiuL6Yo2bnJo6km7WM50CoaX9/7L9CXD7STg
# s3eUJ2p7FfvOADZgO373nqRrB/2mhvoywhDbVJBl+NcRvRUDW8rMqrlSKIAwDIsC
# kwwTWlCfpBSlUgm/c6yCVmt815+sGUPD2k/p+pIzAVUG6fGYAosC2fwPzPajiDGX
# Q+obV1fryKq2SRR2dMnhmPRtr3pQBBkISLuTX6xNM2+CYhYqhBrAlQaOEGhp7Dx3
# ucKjvQFpHgPOSdQxb/HaDv81A20ZUQaydiNNmuKQcTtMx3MsQFR8NyVjH7L+fbS8
# JokjaQ==
# =yVKz
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jun 2024 01:58:43 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240619' of https://gitlab.com/rth7680/qemu: (24 commits)
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
util/bufferiszero: Add loongarch64 vector acceleration
util/bufferiszero: Split out host include files
tcg/loongarch64: Enable v256 with LASX
tcg/loongarch64: Support LASX in tcg_out_vec_op
tcg/loongarch64: Split out vdvjukN in tcg_out_vec_op
tcg/loongarch64: Remove temp_vec from tcg_out_vec_op
tcg/loongarch64: Support LASX in tcg_out_{mov,ld,st}
tcg/loongarch64: Split out vdvjvk in tcg_out_vec_op
tcg/loongarch64: Support LASX in tcg_out_addsub_vec
tcg/loongarch64: Simplify tcg_out_addsub_vec
tcg/loongarch64: Support LASX in tcg_out_dupi_vec
tcg/loongarch64: Use tcg_out_dup_vec in tcg_out_dupi_vec
tcg/loongarch64: Support LASX in tcg_out_dupm_vec
tcg/loongarch64: Support LASX in tcg_out_dup_vec
tcg/loongarch64: Simplify tcg_out_dup_vec
util/loongarch64: Detect LASX vector support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The result has to be done with the signed denominator (b32) instead of
the unsigned value passed in argument (b).
Cc: qemu-stable@nongnu.org
Fixes: 1326010322 ("target/sparc: Remove CC_OP_DIV")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2319
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240606144331.698361-1-chigot@adacore.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit c9274b6bf0 ("target/s390x: start moving TCG-only code
to tcg/") moved mem_helper.c, but the trace-events file is
still in the parent directory, so is the generated trace.h.
Call the s390_skeys_get|set() helper, removing the need
for the trace event shared with the tcg/ sub-directory,
fixing the following build failure:
In file included from ../target/s390x/tcg/mem_helper.c:33:
../target/s390x/tcg/trace.h:1:10: fatal error: 'trace/trace-target_s390x_tcg.h' file not found
#include "trace/trace-target_s390x_tcg.h"
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240613104415.9643-3-philmd@linaro.org>
X86CPU::kvm_no_smi_migration was only used by the
pc-i440fx-2.3 machine, which got removed. Remove it
and simplify kvm_put_vcpu_events().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-23-philmd@linaro.org>
x86_cpu_change_kvm_default() was only used out of kvm-cpu.c by
the pc-i440fx-2.1 machine, which got removed. Make it static,
and remove its declaration. "kvm-cpu.h" is now empty, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-10-philmd@linaro.org>
There can be other confidential computing classes that are not derived
from sev-common. Avoid aborting when encountering them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the same flag generation code as SHL and SHR, but use
the existing gen_shiftd_rm_T1 function to compute the result
as well as CC_SRC.
Decoding-wise, SHLD/SHRD by immediate count as a 4 operand
instruction because s->T0 and s->T1 actually occupy three op
slots. The infrastructure used by opcodes in the 0F 3A table
works fine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SHLD/SHRD can have 3 register operands - s->T0, s->T1 and either
1 or CL - and therefore decode->op[2] is taken by the low part
of the register being shifted. Pass X86_OP_* to gen_shift_count
from its current callers and hardcode cpu_regs[R_ECX] as the
shift count.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use gen_ld_modrm/gen_st_modrm, moving them and gen_shift_flags to the
caller. This way, gen_shiftd_rm_T1 becomes something that the new
decoder can call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These have very simple generators and no need for complex group
decoding. Apart from LAR/LSL which are simplified to use
gen_op_deposit_reg_v and movcond, the code is generally lifted
from translate.c into the generators.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYSENTER is allowed in VM86 mode, but not in real mode. Split the check
so that PE and !VM86 are covered by separate bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already partly implemented due to VLDMXCSR and VSTMXCSR; finish
the job.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All other control registers are stored plainly in CPUX86State.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a bit more generic, as it can be applied to MPX as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like X86_ENTRYr, X86_ENTRYwr is easily changed to use only T0.
In this case, the motivation is to use it for the MOV instruction
family. The case when you need to preserve the input value is the
odd one, as it is used basically only for BLS* instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I am not sure why I made it use T1. It is a bit more symmetric with
respect to X86_ENTRYwr (which uses T0 for the "w"ritten operand
and T1 for the "r"ead operand), but it is also less flexible because it
does not let you apply zextT0/sextT0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes for easier cpu_cc_* setup, and not using set_cc_op()
should come in handy if QEMU ever implements APX.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid using set_cc_op() in preparation for implementing APX; treat
CC_OP_EFLAGS similar to the case where we have the "opposite" cc_op
(CC_OP_ADOX for ADCX and CC_OP_ADCX for ADOX), except the resulting
cc_op is not CC_OP_ADCOX. This is written easily as two "if"s, whose
conditions are both false for CC_OP_EFLAGS, both true for CC_OP_ADCOX,
and one each true for CC_OP_ADCX/ADOX.
The new logic also makes it easy to drop usage of tmp0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUX86State argument would only be used to fetch bytes, but that has to be
done before the generator function is called. So remove it, and all
temptation together with it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes Coverity CID 1546885.
Fixes: 16dcf200dc ("i386/sev: Introduce "sev-common" type to encapsulate common SEV state")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240607183611.1111100-4-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set 'finish->id_block_en' early, so that it is properly reset.
Fixes coverity CID 1546887.
Fixes: 7b34df4426 ("i386/sev: Introduce 'sev-snp-guest' object")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240607183611.1111100-2-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU is started with:
-cpu host,host-cache-info=on,l3-cache=off \
-smp 2,sockets=1,dies=1,cores=1,threads=2
Guest can't acquire maximum number of addressable IDs for processor cores in
the physical package from CPUID[04H].
When creating a CPU topology of 1 core per package, host-cache-info only
uses the Host's addressable core IDs field (CPUID.04H.EAX[bits 31-26]),
resulting in a conflict (on the multicore Host) between the Guest core
topology information in this field and the Guest's actual cores number.
Fix it by removing the unnecessary condition to cover 1 core per package
case. This is safe because cores_per_pkg will not be 0 and will be at
least 1.
Fixes: d7caf13b5f ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache")
Signed-off-by: Guixiong Wei <weiguixiong@bytedance.com>
Signed-off-by: Yipeng Yin <yinyipeng@bytedance.com>
Signed-off-by: Chuang Xu <xuchuangxclwt@bytedance.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240611032314.64076-1-xuchuangxclwt@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only predicate instruction arguments need to be initialized by
idef-parser. This commit removes registers from the init_list and
simplifies gen_inst_init_args() slightly.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-5-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
gen_inst_init_args() is called for instructions using a predicate as an
rvalue. Upon first call, the list of arguments which might need
initialization init_list is freed to indicate that they have been
processed. For instructions without an rvalue predicate,
gen_inst_init_args() isn't called and init_list will never be freed.
Free init_list from free_instruction() if it hasn't already been freed.
A comment in free_instruction is also updated.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-4-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-3-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Before switching to GArray/g_string_printf we used fixed size arrays for
output buffers and instructions arguments among other things.
Macros defining the sizes of these buffers were left behind, remove
them.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-2-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The Hexagon Programmer's Reference Manual says that the exception 0x1e
should be raised upon an unaligned program counter. Let's implement that
and also add some tests.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <277b7aeda2c717a96d4dde936b3ac77707cb6517.1714755107.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
At 09a7e7db0f (Hexagon (target/hexagon) Remove uses of
op_regs_generated.h.inc, 2024-03-06), we've changed the logic of
check_new_value() to use the new pre-calculated
packet->insn[...].dest_idx instead of calculating the index on the fly
using opcode_reginfo[...]. The dest_idx index is calculated roughly like
the following:
for reg in iset[tag]["syntax"]:
if reg.is_written():
dest_idx = regno
break
Thus, we take the first register that is writtable. Before that,
however, we also used to follow an alphabetical order on the register
type: 'd', 'e', 'x', and 'y'. No longer following that makes us select
the wrong register index and the HVX store new instruction does not
update the memory like expected.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <f548dc1c240819c724245e887f29f918441e9125.1716220379.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
=RP7U
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* scsi-disk: Don't silently truncate serial number
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
# FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
# RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
# lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
# 2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
# 9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
# =RP7U
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 08 Jun 2024 01:33:46 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (42 commits)
python: mkvenv: remove ensure command
Revert "python: use vendored tomli"
i386: Add support for overflow recovery
i386: Add support for SUCCOR feature
i386: Fix MCE support for AMD hosts
docs: i386: pc: Avoid mentioning limit of maximum vCPUs
target/i386: Add get/set/migrate support for FRED MSRs
target/i386: enumerate VMX nested-exception support
vmxcap: add support for VMX FRED controls
target/i386: mark CR4.FRED not reserved
target/i386: add support for FRED in CPUID enumeration
hvf: Makes assert_hvf_ok report failed expression
i386/hvf: Updates API usage to use modern vCPU run function
i386/hvf: In kick_vcpu use hv_vcpu_interrupt to force exit
i386/hvf: Fixes dirty memory tracking by page granularity RX->RWX change
hvf: Consistent types for vCPU handles
i386/hvf: Fixes some compilation warnings
i386/hvf: Adds support for INVTSC cpuid bit
stubs/meson: Fix qemuutil build when --disable-system
scsi-disk: Don't silently truncate serial number
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cpuid bit definition for overflow recovery. This is needed in the case
where a deferred error has been sent to the guest, a guest process accesses the
poisoned memory, but the machine_check_poll function has not yet handled the
original deferred error. If overflow recovery is not set in this case, when we
handle the uncorrected error from the poisoned memory access, the overflow bit
will be set and will result in the guest being shut down.
By the time the MCE reaches the guest, the overflow has been handled
by the host and has not caused a shutdown, so include the bit unconditionally.
Signed-off-by: John Allen <john.allen@amd.com>
Message-ID: <20240603193622.47156-4-john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add cpuid bit definition for the SUCCOR feature. This cpuid bit is required to
be exposed to guests to allow them to handle machine check exceptions on AMD
hosts.
----
v2:
- Add "succor" feature word.
- Add case to kvm_arch_get_supported_cpuid for the SUCCOR feature.
Reported-by: William Roche <william.roche@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: John Allen <john.allen@amd.com>
Message-ID: <20240603193622.47156-3-john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the most part, AMD hosts can use the same MCE injection code as Intel, but
there are instances where the qemu implementation is Intel specific. First, MCE
delivery works differently on AMD and does not support broadcast. Second,
kvm_mce_inject generates MCEs that include a number of Intel specific status
bits. Modify kvm_mce_inject to properly generate MCEs on AMD platforms.
Reported-by: William Roche <william.roche@oracle.com>
Signed-off-by: John Allen <john.allen@amd.com>
Message-ID: <20240603193622.47156-2-john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FRED CPU states are managed in 9 new FRED MSRs, in addtion to a few
existing CPU registers and MSRs, e.g., CR4.FRED and MSR_IA32_PL0_SSP.
Save/restore/migrate FRED MSRs if FRED is exposed to the guest.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-7-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow VMX nested-exception support to be exposed in KVM guests, thus
nested KVM guests can enumerate it.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-6-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CR4.FRED bit, i.e., CR4[32], is no longer a reserved bit when FRED
is exposed to guests, otherwise it is still a reserved bit.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20231109072012.8078-3-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FRED, i.e., the Intel flexible return and event delivery architecture,
defines simple new transitions that change privilege level (ring
transitions).
The new transitions defined by the FRED architecture are FRED event
delivery and, for returning from events, two FRED return instructions.
FRED event delivery can effect a transition from ring 3 to ring 0, but
it is used also to deliver events incident to ring 0. One FRED
instruction (ERETU) effects a return from ring 0 to ring 3, while the
other (ERETS) returns while remaining in ring 0. Collectively, FRED
event delivery and the FRED return instructions are FRED transitions.
In addition to these transitions, the FRED architecture defines a new
instruction (LKGS) for managing the state of the GS segment register.
The LKGS instruction can be used by 64-bit operating systems that do
not use the new FRED transitions.
WRMSRNS is an instruction that behaves exactly like WRMSR, with the
only difference being that it is not a serializing instruction by
default. Under certain conditions, WRMSRNS may replace WRMSR to improve
performance. FRED uses it to switch RSP0 in a faster manner.
Search for the latest FRED spec in most search engines with this search
pattern:
site:intel.com FRED (flexible return and event delivery) specification
The CPUID feature flag CPUID.(EAX=7,ECX=1):EAX[17] enumerates FRED, and
the CPUID feature flag CPUID.(EAX=7,ECX=1):EAX[18] enumerates LKGS, and
the CPUID feature flag CPUID.(EAX=7,ECX=1):EAX[19] enumerates WRMSRNS.
Add CPUID definitions for FRED/LKGS/WRMSRNS, and expose them to KVM guests.
Because FRED relies on LKGS and WRMSRNS, add that to feature dependency
map.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-2-xin3.li@intel.com>
[Fix order of dependencies, add dependencies from LM to FRED. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
macOS 10.15 introduced the more efficient hv_vcpu_run_until() function
to supersede hv_vcpu_run(). According to the documentation, there is no
longer any reason to use the latter on modern host OS versions, especially
after 11.0 added support for an indefinite deadline.
Observed behaviour of the newer function is that as documented, it exits
much less frequently - and most of the original function’s exits seem to
have been effectively pointless.
Another reason to use the new function is that it is a prerequisite for
using newer features such as in-kernel APIC support. (Not covered by
this patch.)
This change implements the upgrade by selecting one of three code paths
at compile time: two static code paths for the new and old functions
respectively, when building for targets where the new function is either
not available, or where the built executable won’t run on older
platforms lacking the new function anyway. The third code path selects
dynamically based on runtime detected availability of the weakly-linked
symbol.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-7-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When interrupting a vCPU thread, this patch actually tells the hypervisor to
stop running guest code on that vCPU.
Calling hv_vcpu_interrupt actually forces a vCPU exit, analogously to
hv_vcpus_exit on aarch64. Alternatively, if the vCPU thread
is not
running the VM, it will immediately cause an exit when it attempts
to do so.
Previously, hvf_kick_vcpu_thread relied upon hv_vcpu_run returning very
frequently, including many spurious exits, which made it less of a problem that
nothing was actively done to stop the vCPU thread running guest code.
The newer, more efficient hv_vcpu_run_until exits much more rarely, so a true
"kick" is needed before switching to that.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-6-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using x86 macOS Hypervisor.framework as accelerator, detection of
dirty memory regions is implemented by marking logged memory region
slots as read-only in the EPT, then setting the dirty flag when a
guest write causes a fault. The area marked dirty should then be marked
writable in order for subsequent writes to succeed without a VM exit.
However, dirty bits are tracked on a per-page basis, whereas the fault
handler was marking the whole logged memory region as writable. This
change fixes the fault handler so only the protection of the single
faulting page is marked as dirty.
(Note: the dirty page tracking appeared to work despite this error
because HVF’s hv_vcpu_run() function generated unnecessary EPT fault
exits, which ended up causing the dirty marking handler to run even
when the memory region had been marked RW. When using
hv_vcpu_run_until(), a change planned for a subsequent commit, these
spurious exits no longer occur, so dirty memory tracking malfunctions.)
Additionally, the dirty page is set to permit code execution, the same
as all other guest memory; changing memory protection from RX to RW not
RWX appears to have been an oversight.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-5-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bunch of function definitions used empty parentheses instead of (void) syntax, yielding the following warning when building with clang on macOS:
warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
In addition to fixing these function headers, it also fixes what appears to be a typo causing a variable to be unused after initialisation.
warning: variable 'entry_ctls' set but not used [-Wunused-but-set-variable]
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-3-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the INVTSC bit to the Hypervisor.framework accelerator's
CPUID bit passthrough allow-list. Previously, specifying +invtsc in the CPU
configuration would fail with the following warning despite the host CPU
advertising the feature:
qemu-system-x86_64: warning: host doesn't support requested feature:
CPUID.80000007H:EDX.invtsc [bit 8]
x86 macOS itself relies on a fixed rate TSC for its own Mach absolute time
timestamp mechanism, so there's no reason we can't enable this bit for guests.
When the feature is enabled, a migration blocker is installed.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-2-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The calculation of FrameTemp is done using the size indicated by mo_pushpop()
before being written back to EBP, but the final writeback to EBP is done using
the size indicated by mo_stacksize().
In the case where mo_pushpop() is MO_32 and mo_stacksize() is MO_16 then the
final writeback to EBP is done using MO_16 which can leave junk in the top
16-bits of EBP after executing ENTER.
Change the writeback of EBP to use the same size indicated by mo_pushpop() to
ensure that the full value is written back.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198
Message-ID: <20240606095319.229650-5-mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When OS/2 Warp configures its segment descriptors, many of them are configured with
the P flag clear to allow for a fault-on-demand implementation. In the case where
the stack value is POPped into the segment registers, the SP is incremented before
calling gen_helper_load_seg() to validate the segment descriptor:
IN:
0xffef2c0c: 66 07 popl %es
OP:
ld_i32 loc9,env,$0xfffffffffffffff8
sub_i32 loc9,loc9,$0x1
brcond_i32 loc9,$0x0,lt,$L0
st16_i32 loc9,env,$0xfffffffffffffff8
st8_i32 $0x1,env,$0xfffffffffffffffc
---- 0000000000000c0c 0000000000000000
ext16u_i64 loc0,rsp
add_i64 loc0,loc0,ss_base
ext32u_i64 loc0,loc0
qemu_ld_a64_i64 loc0,loc0,noat+un+leul,5
add_i64 loc3,rsp,$0x4
deposit_i64 rsp,rsp,loc3,$0x0,$0x10
extrl_i64_i32 loc5,loc0
call load_seg,$0x0,$0,env,$0x0,loc5
add_i64 rip,rip,$0x2
ext16u_i64 rip,rip
exit_tb $0x0
set_label $L0
exit_tb $0x7fff58000043
If helper_load_seg() generates a fault when validating the segment descriptor then as
the SP has already been incremented, the topmost word of the stack is overwritten by
the arguments pushed onto the stack by the CPU before taking the fault handler. As a
consequence things rapidly go wrong upon return from the fault handler due to the
corrupted stack.
Update the logic for the existing writeback condition so that a POP into the segment
registers also calls helper_load_seg() first before incrementing the SP, so that if a
fault occurs the SP remains unaltered.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198
Message-ID: <20240606095319.229650-4-mark.cave-ayland@ilande.co.uk>
Fixes: cc1d28bdbe ("target/i386: move 00-5F opcodes to new decoder", 2024-05-07)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of directly implementing the writeback using gen_op_st_v(), use the
existing gen_writeback() function.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240606095319.229650-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will make subsequent changes a little easier to read.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240606095319.229650-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DISAS_NORETURN suppresses the work normally done by gen_eob(), and therefore
must be used in special cases only. Document them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HLT uses DISAS_NORETURN because the corresponding helper calls
cpu_loop_exit(). However, while gen_eob() clears HF_RF_MASK and
synthesizes a #DB exception if single-step is active, none of this is
done by HLT. Note that the single-step trap is generated after the halt
is finished.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PAUSE uses DISAS_NORETURN because the corresponding helper
calls cpu_loop_exit(). However, while HLT clear HF_INHIBIT_IRQ_MASK
to correctly handle "STI; HLT", the same is missing from PAUSE.
And also gen_eob() clears HF_RF_MASK and synthesizes a #DB exception
if single-step is active; none of this is done by HLT and PAUSE.
Start fixing PAUSE, HLT will follow.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From vm entry to exit, VMRUN is handled as a single instruction. It
uses DISAS_NORETURN in order to avoid processing TF or RF before
the first instruction executes in the guest. However, the corresponding
handling is missing in vmexit. Add it, and at the same time reorganize
the comments with quotes from the manual about the tasks performed
by a #VMEXIT.
Another gen_eob() task that is missing in VMRUN is preparing the
HF_INHIBIT_IRQ flag for the next instruction, in this case by loading
it from the VMCB control state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the required DR7 (either from the VMCB or from the host save
area) disables a breakpoint that was enabled prior to vmentry
or vmexit, it is left enabled and will trigger EXCP_DEBUG.
This causes a spurious #DB on the next crossing of the breakpoint.
To disable it, vmentry/vmexit must use cpu_x86_update_dr7
to load DR7.
Because cpu_x86_update_dr7 takes a 32-bit argument, check
reserved bits prior to calling cpu_x86_update_dr7, and do the
same for DR6 as well for consistency.
This scenario is tested by the "host_rflags" test in kvm-unit-tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR7.GD triggers a #DB exception on any access to debug registers.
The GD bit is cleared so that the #DB handler itself can access
the debug registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use decode.c's support for intercepts, doing the check in TCG-generated
code rather than the helper. This is cleaner because it allows removing
the eip_addend argument to helper_pause(), even though it adds a bit of
bloat for opcode 0x90's new decoding function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use decode.c's support for intercepts, doing the check in TCG-generated
code rather than the helper. This is cleaner because it allows removing
the eip_addend argument to helper_hlt().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ICEBP generates a trap-like exception, while gen_exception() produces
a fault. Resurrect gen_update_eip_next() to implement the desired
semantics.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When preparing an exception stack frame for a fault exception, the value
pushed for RF is 1. Take that into account. The same should be true
of interrupts for repeated string instructions, but the situation there
is complicated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
description:
loongarch_cpu_dump_state() want to dump all loongarch cpu
state registers, but there is a tiny typographical error when
printing "PRCFG2".
Cc: qemu-stable@nongnu.org
Signed-off-by: lanyanzhi <lanyanzhi22b@ict.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240604073831.666690-1-lanyanzhi22b@ict.ac.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Ignore the "monitor" portion and treat them the same
as their base ASIs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VIS4 completes the set, adding missing signed 8-bit ops
and missing unsigned 16 and 32-bit ops.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The manual separates VIS 3 and VIS 3B, even though they are both
present in all extant cpus. For clarity, let the translator
match the manual but otherwise leave them on the same feature bit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rearrange PDIST so that do_dddd is general purpose and may
be re-used for FMADDd etc. Add pickNaN and pickNaNMulAdd.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Form the proper register decoding from the start.
Because we're removing the translation from the inner-most
gen_load_fpr_* and gen_store_fpr_* routines, this must be
done for all insns at once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation returns the high 16 bits of a 24-bit multiply
that has been sign-extended to 32 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apply DFPREG to compute the register number.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Follow the Oracle Sparc 2015 implementation note and bound
the input value of N to 5 from the lower 3 bits of rs2.
Spell out all of the intermediate values, matching the diagram
in the manual. Fix extraction of upper_x and upper_y for N=0.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In SNP, the hashes page designated with a specific metadata entry
published in AmdSev OVMF.
Therefore, if the user enabled kernel hashes (for measured direct boot),
QEMU should prepare the content of hashes table, and during the
processing of the metadata entry it copy the content into the designated
page and encrypt it.
Note that in SNP (unlike SEV and SEV-ES) the measurements is done in
whole 4KB pages. Therefore QEMU zeros the whole page that includes the
hashes table, and fills in the kernel hashes area in that page, and then
encrypts the whole page. The rest of the page is reserved for SEV
launch secrets which are not usable anyway on SNP.
If the user disabled kernel hashes, QEMU pre-validates the kernel hashes
page as a zero page.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-24-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of PaddedSevHashTable before SevSnpGuest so
we can add a new such field to the latter.
No functional change intended.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-23-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the building of the kernel hashes table out from
sev_add_kernel_loader_hashes() to allow building it in
other memory areas (for SNP support).
No functional change intended.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-22-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM will forward GHCB page-state change requests to userspace in the
form of KVM_HC_MAP_GPA_RANGE, so make sure the hypercall handling is
enabled for SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-32-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_HC_MAP_GPA_RANGE will be used to send requests to userspace for
private/shared memory attribute updates requested by the guest.
Implement handling for that use-case along with some basic
infrastructure for enabling specific hypercall events.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-31-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke as sev_snp_launch_update_data() for SNP object.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-27-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add launch_update_data() in SevCommonStateClass and
invoke as sev_launch_update_data() for SEV object.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-26-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As with SEV, an SNP guest requires that the BIOS be part of the initial
encrypted/measured guest payload. Extend sev_encrypt_flash() to handle
the SNP case and plumb through the GPA of the BIOS location since this
is needed for SNP.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-25-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP firmware allows a special guest page to be populated with a
table of guest CPUID values so that they can be validated through
firmware before being loaded into encrypted guest memory where they can
be used in place of hypervisor-provided values[1].
As part of SEV-SNP guest initialization, use this interface to validate
the CPUID entries reported by KVM_GET_CPUID2 prior to initial guest
start and populate the CPUID page reserved by OVMF with the resulting
encrypted data.
[1] SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-21-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF reserves various pages so they can be pre-initialized/validated
prior to launching the guest. Add support for populating these pages
with the expected content.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-20-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent version of OVMF expanded the reset vector GUID list to add
SEV-specific metadata GUID. The SEV metadata describes the reserved
memory regions such as the secrets and CPUID page used during the SEV-SNP
guest launch.
The pc_system_get_ovmf_sev_metadata_ptr() is used to retieve the SEV
metadata pointer from the OVMF GUID list.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-19-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once KVM_SNP_LAUNCH_FINISH is called the vCPU state is copied into the
vCPU's VMSA page and measured/encrypted. Any attempt to read/write CPU
state afterward will only be acting on the initial data and so are
effectively no-ops.
Set the vCPU state to protected at this point so that QEMU don't
continue trying to re-sync vCPU data during guest runtime.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-18-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Process any queued up launch data and encrypt/measure it into the SNP
guest instance prior to initial guest launch.
This also updates the KVM_SEV_SNP_LAUNCH_UPDATE call to handle partial
update responses.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-17-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SNP_LAUNCH_START is called first to create a cryptographic launch
context within the firmware.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-16-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the current 'query-sev' command is relevant to both legacy
SEV/SEV-ES guests and SEV-SNP guests, with 2 exceptions:
- 'policy' is a 64-bit field for SEV-SNP, not 32-bit, and
the meaning of the bit positions has changed
- 'handle' is not relevant to SEV-SNP
To address this, this patch adds a new 'sev-type' field that can be
used as a discriminator to select between SEV and SEV-SNP-specific
fields/formats without breaking compatibility for existing management
tools (so long as management tools that add support for launching
SEV-SNP guest update their handling of query-sev appropriately).
The corresponding HMP command has also been fixed up similarly.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by:Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-15-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV guests can use either KVM_X86_DEFAULT_VM, KVM_X86_SEV_VM,
or KVM_X86_SEV_ES_VM depending on the configuration and what
the host kernel supports. SNP guests on the other hand can only
ever use KVM_X86_SNP_VM, so split determination of VM type out
into a separate class method that can be set accordingly for
sev-guest vs. sev-snp-guest objects and add handling for SNP.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-14-pankaj.gupta@amd.com>
[Remove unnecessary function pointer declaration. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-SNP guests, launch measurement is queried from within the guest
during attestation, so don't attempt to return it as part of
query-sev-launch-measure.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-13-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SNP guests will rely on this bit to determine certain feature support.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-12-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SNP does not support SMM and requires guest_memfd for
private guest memory, so add SNP specific kvm_init()
functionality in snp_kvm_init() class method.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-11-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some aspects of the init routine SEV are specific to SEV and not
applicable for SNP guests, so move the SEV-specific bits into
separate class method and retain only the common functionality.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-10-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a simple helper to check if the current guest type is SNP. Also have
SNP-enabled imply that SEV-ES is enabled as well, and fix up any places
where the sev_es_enabled() check is expecting a pure/non-SNP guest.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-9-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP support relies on a different set of properties/state than the
existing 'sev-guest' object. This patch introduces the 'sev-snp-guest'
object, which can be used to configure an SEV-SNP guest. For example,
a default-configured SEV-SNP guest with no additional information
passed in for use with attestation:
-object sev-snp-guest,id=sev0
or a fully-specified SEV-SNP guest where all spec-defined binary
blobs are passed in as base64-encoded strings:
-object sev-snp-guest,id=sev0, \
policy=0x30000, \
init-flags=0, \
id-block=YWFhYWFhYWFhYWFhYWFhCg==, \
id-auth=CxHK/OKLkXGn/KpAC7Wl1FSiisWDbGTEKz..., \
author-key-enabled=on, \
host-data=LNkCWBRC5CcdGXirbNUV1OrsR28s..., \
guest-visible-workarounds=AA==, \
See the QAPI schema updates included in this patch for more usage
details.
In some cases these blobs may be up to 4096 characters, but this is
generally well below the default limit for linux hosts where
command-line sizes are defined by the sysconf-configurable ARG_MAX
value, which defaults to 2097152 characters for Ubuntu hosts, for
example.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (for QAPI schema)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-8-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When sev-snp-guest objects are introduced there will be a number of
differences in how the launch finish is handled compared to the existing
sev-guest object. Move sev_launch_finish() to a class method to make it
easier to implement SNP-specific launch update functionality later.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-7-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When sev-snp-guest objects are introduced there will be a number of
differences in how the launch data is handled compared to the existing
sev-guest object. Move sev_launch_start() to a class method to make it
easier to implement SNP-specific launch update functionality later.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-6-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently all SEV/SEV-ES functionality is managed through a single
'sev-guest' QOM type. With upcoming support for SEV-SNP, taking this
same approach won't work well since some of the properties/state
managed by 'sev-guest' is not applicable to SEV-SNP, which will instead
rely on a new QOM type with its own set of properties/state.
To prepare for this, this patch moves common state into an abstract
'sev-common' parent type to encapsulate properties/state that are
common to both SEV/SEV-ES and SEV-SNP, leaving only SEV/SEV-ES-specific
properties/state in the current 'sev-guest' type. This should not
affect current behavior or command-line options.
As part of this patch, some related changes are also made:
- a static 'sev_guest' variable is currently used to keep track of
the 'sev-guest' instance. SEV-SNP would similarly introduce an
'sev_snp_guest' static variable. But these instances are now
available via qdev_get_machine()->cgs, so switch to using that
instead and drop the static variable.
- 'sev_guest' is currently used as the name for the static variable
holding a pointer to the 'sev-guest' instance. Re-purpose the name
as a local variable referring the 'sev-guest' instance, and use
that consistently throughout the code so it can be easily
distinguished from sev-common/sev-snp-guest instances.
- 'sev' is generally used as the name for local variables holding a
pointer to the 'sev-guest' instance. In cases where that now points
to common state, use the name 'sev_common'; in cases where that now
points to state specific to 'sev-guest' instance, use the name
'sev_guest'
In order to enable kernel-hashes for SNP, pull it from
SevGuestProperties to its parent SevCommonProperties so
it will be available for both SEV and SNP.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-5-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xsave.flat checks that "executing the XSETBV instruction causes a general-
protection fault (#GP) if ECX = 0 and EAX[2:1] has the value 10b". QEMU allows
that option, so the test fails. Add the condition.
Cc: qemu-stable@nongnu.org
Fixes: 892544317f ("target/i386: implement XSAVE and XRSTOR of AVX registers", 2022-10-18)
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DisasContext.cpuid_ext_features indicates CPUID.01H.ECX.
Use DisasContext.cpuid_7_0_ecx_features field to check RDPID feature bit
(CPUID_7_0_ECX_RDPID).
Fixes: 6750485bf4 ("target/i386: implement RDPID in TCG")
Inspired-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240603080723.1256662-1-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit fixes an issue with MOV instructions (0x8C and 0x8E)
involving segment registers; MOV to segment register's source is
16-bit, while MOV from segment register has to explicitly set the
memory operand size to 16 bits. Introduce a new flag
X86_SPECIAL_Op0_Mw to handle this specification correctly.
Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Message-ID: <20240602100528.2135717-1-lixinyu20s@ict.ac.cn>
Fixes: 5e9e21bcc4 ("target/i386: move 60-BF opcodes to new decoder", 2024-05-07)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Features check of CPUID_SSE and CPUID_SSE2 should use cpuid_features,
rather than cpuid_ext_features.
Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240602100904.2137939-1-lixinyu20s@ict.ac.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Aside from the round robin threads this is all common code. By
moving the halt_cond setup we also no longer need hacks to work around
the race between QOM object creation and thread creation.
It is a little ugly to free stuff up for the round robin thread but
better it deal with its own specialises than making the other
accelerators jump through hoops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-3-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240412073346.458116-28-richard.henderson@linaro.org>
[PMD: Fixed typo reported by Peter Maydell]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1,
resulting in painful developper experience. Use snprintf() instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240411104340.6617-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit e1152f8166 ("target/mips: Remove helpers accessing
SAAR registers") this header is not needed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240529155216.5574-1-philmd@linaro.org>
riscv_cpu_do_interrupt() is not reachable on user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230626232007.8933-7-philmd@linaro.org>
We only build for 32/64-bit hosts, so TCG is required for
128-bit targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230626232007.8933-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230626232007.8933-2-philmd@linaro.org>
Commit 33a24910ae changed 'reg_width' to use 'vlenb', i.e. vector length
in bytes, when in this context we want 'reg_width' as the length in
bits.
Fix 'reg_width' back to the value in bits like 7cb59921c0
("target/riscv/gdbstub.c: use 'vlenb' instead of shifting 'vlen'") set
beforehand.
While we're at it, rename 'reg_width' to 'bitsize' to provide a bit more
clarity about what the variable represents. 'bitsize' is also used in
riscv_gen_dynamic_csr_feature() with the same purpose, i.e. as an input to
gdb_feature_builder_append_reg().
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Robin Dapp <rdapp.gcc@gmail.com>
Fixes: 33a24910ae ("target/riscv: Use GDBFeature for dynamic XML")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240517203054.880861-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In AIA spec, each hart (or each hart within a group) has a unique hart
number to locate the memory pages of interrupt files in the address
space. The number of bits required to represent any hart number is equal
to ceil(log2(hmax + 1)), where hmax is the largest hart number among
groups.
However, if the largest hart number among groups is a power of 2, QEMU
will pass an inaccurate hart-index-bit setting to Linux. For example, when
the guest OS has 4 harts, only ceil(log2(3 + 1)) = 2 bits are sufficient
to represent 4 harts, but we passes 3 to Linux. The code needs to be
updated to ensure accurate hart-index-bit settings.
Additionally, a Linux patch[1] is necessary to correctly recover the hart
index when the guest OS has only 1 hart, where the hart-index-bit is 0.
[1] https://lore.kernel.org/lkml/20240415064905.25184-1-yongxuan.wang@sifive.com/t/
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240515091129.28116-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When running the instruction
```
cbo.flush 0(x0)
```
QEMU would segfault.
The issue was in cpu_gpr[a->rs1] as QEMU does not have cpu_gpr[0]
allocated.
In order to fix this let's use the existing get_address()
helper. This also has the benefit of performing pointer mask
calculations on the address specified in rs1.
The pointer masking specificiation specifically states:
"""
Cache Management Operations: All instructions in Zicbom, Zicbop and Zicboz
"""
So this is the correct behaviour and we previously have been incorrectly
not masking the address.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: Fabian Thomas <fabian.thomas@cispa.de>
Fixes: e05da09b7c ("target/riscv: implement Zicbom extension")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240514023910.301766-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This extension has now been ratified:
https://jira.riscv.org/browse/RVS-2006 so the "x-" prefix can be
removed.
Since this is now a ratified extension add it to the list of extensions
included in the "max" CPU variant.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240514110217.22516-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Previous patch fixed the PMP priority in raise_mmu_exception() but we're still
setting mtval2 incorrectly. In riscv_cpu_tlb_fill(), after pmp check in 2 stage
translation part, mtval2 will be set in case of successes 2 stage translation but
failed pmp check.
In this case we gonna set mtval2 via env->guest_phys_fault_addr in context of
riscv_cpu_tlb_fill(), as this was a guest-page-fault, but it didn't and mtval2
should be zero, according to RISCV privileged spec sect. 9.4.4: When a guest
page-fault is taken into M-mode, mtval2 is written with either zero or guest
physical address that faulted, shifted by 2 bits. *For other traps, mtval2
is set to zero...*
Signed-off-by: Alexei Filippov <alexei.filippov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240503103052.6819-1-alexei.filippov@syntacore.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
raise_mmu_exception(), as is today, is prioritizing guest page faults by
checking first if virt_enabled && !first_stage, and then considering the
regular inst/load/store faults.
There's no mention in the spec about guest page fault being a higher
priority that PMP faults. In fact, privileged spec section 3.7.1 says:
"Attempting to fetch an instruction from a PMP region that does not have
execute permissions raises an instruction access-fault exception.
Attempting to execute a load or load-reserved instruction which accesses
a physical address within a PMP region without read permissions raises a
load access-fault exception. Attempting to execute a store,
store-conditional, or AMO instruction which accesses a physical address
within a PMP region without write permissions raises a store
access-fault exception."
So, in fact, we're doing it wrong - PMP faults should always be thrown,
regardless of also being a first or second stage fault.
The way riscv_cpu_tlb_fill() and get_physical_address() work is
adequate: a TRANSLATE_PMP_FAIL error is immediately reported and
reflected in the 'pmp_violation' flag. What we need is to change
raise_mmu_exception() to prioritize it.
Reported-by: Joseph Chan <jchan@ventanamicro.com>
Fixes: 82d53adfbb ("target/riscv/cpu_helper.c: Invalid exception on MMU translation stage")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240413105929.7030-1-alexei.filippov@syntacore.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the checking functions check both the single and double width
operators at the same time, then the single width operator checking
functions (require_rvf[min]) will check whether the SEW is 8.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The opfv_narrow_check needs to check the single width float operator by
require_rvf.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The require_scale_rvf function only checks the double width operator for
the vector floating point widen instructions, so most of the widen
checking functions need to add require_rvf for single width operator.
The vfwcvt.f.x.v and vfwcvt.f.xu.v instructions convert single width
integer to double width float, so the opfxv_widen_check function doesn’t
need require_rvf for the single width operator(integer).
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According v spec 18.4, only the vfwcvt.f.f.v and vfncvt.f.f.w
instructions will be affected by Zvfhmin extension.
And the vfwcvt.f.f.v and vfncvt.f.f.w instructions only support the
conversions of
* From 1*SEW(16/32) to 2*SEW(32/64)
* From 2*SEW(32/64) to 1*SEW(16/32)
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The th.sxstatus CSR can be used to identify available custom extension
on T-Head CPUs. The CSR is documented here:
https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadsxstatus.adoc
An important property of this patch is, that the th.sxstatus MAEE field
is not set (indicating that XTheadMae is not available).
XTheadMae is a memory attribute extension (similar to Svpbmt) which is
implemented in many T-Head CPUs (C906, C910, etc.) and utilizes bits
in PTEs that are marked as reserved. QEMU maintainers prefer to not
implement XTheadMae, so we need give kernels a mechanism to identify
if XTheadMae is available in a system or not. And this patch introduces
this mechanism in QEMU in a way that's compatible with real HW
(i.e., probing the th.sxstatus.MAEE bit).
Further context can be found on the list:
https://lists.gnu.org/archive/html/qemu-devel/2024-02/msg00775.html
Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-ID: <20240429073656.2486732-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In this patch, we modify the decoder to be a freely composable data
structure instead of a hardcoded one. It can be dynamically builded up
according to the extensions.
This approach has several benefits:
1. Provides support for heterogeneous cpu architectures. As we add decoder in
RISCVCPU, each cpu can have their own decoder, and the decoders can be
different due to cpu's features.
2. Improve the decoding efficiency. We run the guard_func to see if the decoder
can be added to the dynamic_decoder when building up the decoder. Therefore,
there is no need to run the guard_func when decoding each instruction. It can
improve the decoding efficiency
3. For vendor or dynamic cpus, it allows them to customize their own decoder
functions to improve decoding efficiency, especially when vendor-defined
instruction sets increase. Because of dynamic building up, it can skip the other
decoder guard functions when decoding.
4. Pre patch for allowing adding a vendor decoder before decode_insn32() with minimal
overhead for users that don't need this particular vendor decoder.
Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com>
Suggested-by: Christoph Muellner <christoph.muellner@vrull.eu>
Co-authored-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240506023607.29544-1-eric.huang@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This code has a typo that writes zvkb to zvkg, causing users can't
enable zvkb through the config. This patch gets this fixed.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Fixes: ea61ef7097 ("target/riscv: Move vector crypto extensions to riscv_cpu_extensions")
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Message-ID: <tencent_7E34EEF0F90B9A68BF38BEE09EC6D4877C0A@qq.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In RVV and vcrypto instructions, the masked and tail elements are set to 1s
using vext_set_elems_1s function if the vma/vta bit is set. It is the element
agnostic policy.
However, this function can't deal the big endian situation. This patch fixes
the problem by adding handling of such case.
Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240325021654.6594-1-eric.huang@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In current implementation, the gdbstub allows reading vector registers
only if V extension is supported. However, all vector extensions and
vector crypto extensions have the vector registers and they all depend
on Zve32x. The gdbstub should check for Zve32x instead.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Message-ID: <20240328022343.6871-4-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve64x extension. Enabling Zve64f enables Zve64x and
enabling Zve64x enables Zve32x according to their dependency.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2107
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-3-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve32x extension and replace some checks for Zve32f with
Zve32x, since Zve32f depends on Zve32x.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privileged spec section 4.1.9 mentions:
"When a trap is taken into S-mode, stval is written with
exception-specific information to assist software in handling the trap.
(...)
If stval is written with a nonzero value when a breakpoint,
address-misaligned, access-fault, or page-fault exception occurs on an
instruction fetch, load, or store, then stval will contain the faulting
virtual address."
A similar text is found for mtval in section 3.1.16.
Setting mtval/stval in this scenario is optional, but some softwares read
these regs when handling ebreaks.
Write 'badaddr' in all ebreak breakpoints to write the appropriate
'tval' during riscv_do_cpu_interrrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240416230437.1869024-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're not setting (s/m)tval when triggering breakpoints of type 2
(mcontrol) and 6 (mcontrol6). According to the debug spec section
5.7.12, "Match Control Type 6":
"The Privileged Spec says that breakpoint exceptions that occur on
instruction fetches, loads, or stores update the tval CSR with either
zero or the faulting virtual address. The faulting virtual address for
an mcontrol6 trigger with action = 0 is the address being accessed and
which caused that trigger to fire."
A similar text is also found in the Debug spec section 5.7.11 w.r.t.
mcontrol.
Note that what we're doing ATM is not violating the spec, but it's
simple enough to set mtval/stval and it makes life easier for any
software that relies on this info.
Given that we always use action = 0, save the faulting address for the
mcontrol and mcontrol6 trigger breakpoints into env->badaddr, which is
used as as scratch area for traps with address information. 'tval' is
then set during riscv_cpu_do_interrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240416230437.1869024-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Running a KVM guest using a 6.9-rc3 kernel, in a 6.8 host that has zkr
enabled, will fail with a kernel oops SIGILL right at the start. The
reason is that we can't expose zkr without implementing the SEED CSR.
Disabling zkr in the guest would be a workaround, but if the KVM doesn't
allow it we'll error out and never boot.
In hindsight this is too strict. If we keep proceeding, despite not
disabling the extension in the KVM vcpu, we'll not add the extension in
the riscv,isa. The guest kernel will be unaware of the extension, i.e.
it doesn't matter if the KVM vcpu has it enabled underneath or not. So
it's ok to keep booting in this case.
Change our current logic to not error out if we fail to disable an
extension in kvm_set_one_reg(), but show a warning and keep booting. It
is important to throw a warning because we must make the user aware that
the extension is still available in the vcpu, meaning that an
ill-behaved guest can ignore the riscv,isa settings and use the
extension.
The case we're handling happens with an EINVAL error code. If we fail to
disable the extension in KVM for any other reason, error out.
We'll also keep erroring out when we fail to enable an extension in KVM,
since adding the extension in riscv,isa at this point will cause a guest
malfunction because the extension isn't enabled in the vcpu.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422171425.333037-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current semihost exception number (16) is a reserved number (range
[16-17]). The upcoming double trap specification uses that number for
the double trap exception. Since the privileged spec (Table 22) defines
ranges for custom uses change the semihosting exception number to 63
which belongs to the range [48-63] in order to avoid any future
collisions with reserved exception.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240422135840.1959967-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SBI defines a Debug Console extension "DBCN" that will, in time, replace
the legacy console putchar and getchar SBI extensions.
The appeal of the DBCN extension is that it allows multiple bytes to be
read/written in the SBI console in a single SBI call.
As far as KVM goes, the DBCN calls are forwarded by an in-kernel KVM
module to userspace. But this will only happens if the KVM module
actually supports this SBI extension and we activate it.
We'll check for DBCN support during init time, checking if get-reg-list
is advertising KVM_RISCV_SBI_EXT_DBCN. In that case, we'll enable it via
kvm_set_one_reg() during kvm_arch_init_vcpu().
Finally, change kvm_riscv_handle_sbi() to handle the incoming calls for
SBI_EXT_DBCN, reading and writing as required.
A simple KVM guest with 'earlycon=sbi', running in an emulated RISC-V
host, takes around 20 seconds to boot without using DBCN. With this
patch we're taking around 14 seconds to boot due to the speed-up in the
terminal output. There's no change in boot time if the guest isn't
using earlycon.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240425155012.581366-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implementing wrs.nto to always just return is consistent with the
specification, as the instruction is permitted to terminate the
stall for any reason, but it's not useful for virtualization, where
we'd like the guest to trap to the hypervisor in order to allow
scheduling of the lock holding VCPU. Change to always immediately
raise exceptions when the appropriate conditions are present,
otherwise continue to just return. Note, immediately raising
exceptions is also consistent with the specification since the
time limit that should expire prior to the exception is
implementation-specific.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240424142808.62936-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zkr extension may only be exposed to KVM guests if the VMM
implements the SEED CSR. Use the same implementation as TCG.
Without this patch, running with a KVM which does not forward the
SEED CSR access to QEMU will result in an ILL exception being
injected into the guest (this results in Linux guests crashing on
boot). And, when running with a KVM which does forward the access,
QEMU will crash, since QEMU doesn't know what to do with the exit.
Fixes: 3108e2f1c6 ("target/riscv/kvm: update KVM exts to Linux 6.8")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422134605.534207-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.
We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.
We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the only instructions in the 3 source scalar class.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same
and disas_simd_scalar_three_reg_same, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have a gvec helper for the operations, but we aren't
using it on the aa32 neon side. Create a unified expander for
use by both aa32 and aa64 translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are faux 2-operand instructions, reading from rd.
Sort them next to the other three-operand same insns for clarity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need for a full comparison; xor produces non-zero bits
for QC just fine.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If help_op is not set, ret == DISAS_NEXT.
Shift the test up from surrounding help_wout, help_cout
to skipping to out, as we do elsewhere in the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-14-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Set per_address and ilen in per_ifetch; this is valid for
all PER exceptions and will last until the end of the
instruction. Therefore we don't need to give the same
data to per_check_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-13-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
CPU state is read on the exception path.
Fixes: 83bb161299 ("target-s390x: PER instruction-fetch nullification event support")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240502054417.234340-12-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
At this point the instruction is complete and there's nothing
left to do but raise the exception. With this change we need
not make two helper calls for this event.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-11-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Drop from argument, since gbea has always been updated with
this address. Add ilen argument for setting int_pgm_ilen.
Use update_cc_op before calling per_branch.
By raising the exception here, we need not call
per_check_exception later, which means we can clean up the
normal non-exception branch path.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-10-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The breaking-event-address register is updated regardless
of PER being enabled.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-9-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Always use a tcg branch, instead of movcond. The movcond
was not a bad idea before PER was added, but since then
we have either 2 or 3 actions to perform on each leg of
the branch, and multiple movcond is inefficient.
Reorder the taken branch to be fallthrough of the tcg branch.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small helper to handle unconditional indirect jumps.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For PER, we require a conditional call to helper_per_branch
for the conditional branch. Fold the remaining optimization
into a call to helper_goto_direct, which will take care of
the remaining gbea adjustment.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Record successful-branching, instruction-fetching, and
store-using-real-address. The other PER bits are not used
during translation. Having checked these at translation time,
we can remove runtime tests from the helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update from the PoO 14th edition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using exception unwind via tcg_s390_program_interrupt,
we discard the current value of psw.addr, which discards
the result of a branch.
Pass in the address of the next instruction, which may
not be sequential. Pass in ilen, which we would have
gotten from unwind and is passed to the exception handler.
Sync cc_op before the call, which we would have gotten
from unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-2-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This includes AND, ORR, EOR, BIC, ORN, BSF, BIT, BIF.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_simd_3same_pair
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same_fp16,
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_3same_float
and disas_simd_scalar_three_reg_same_fp16 so remove them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the last instruction within disas_fp_2src,
so remove that and its subroutines.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Load and zero-extend float16 into a TCGv_i32 before
all scalar operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert all forms (scalar, vector, scalar indexed, vector indexed),
which allows us to remove switch table entries elsewhere.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split some routines out of translate-a64.c and translate-sve.c
that are used by both.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of these insns have "if sz == '1' then UNDEFINED" in their pseudocode.
Fixes a RISU miscompare for invalid insn 0x5ef0c87a.
Fixes: 5c36d89567 ("arm/translate-a64: add all FP16 ops in simd_scalar_pairwise")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The decode of FMOV (vector, immediate, half-precision) vs
invalid cases of MOVI are incorrect.
Fixes RISU mismatch for invalid insn 0x2f01fd31.
Fixes: 70b4e6a445 ("arm/translate-a64: add FP16 FMOV to simd_mod_imm")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in that neither PLI nor PLDW are present in ARMv6T2,
but are introduced with ARMv7 and ARMv7MP respectively.
For clarity, do not use NOP for PLD.
Note that there is no PLDW (literal). Architecturally in the
T1 encoding of "PLD (literal)" bit 5 is "(0)", which means
that it should be zero and if it is not then the behaviour
is CONSTRAINED UNPREDICTABLE (might UNDEF, NOP, or ignore the
value of the bit).
In our implementation we have patterns for both:
+ PLD 1111 1000 -001 1111 1111 ------------ # (literal)
+ PLD 1111 1000 -011 1111 1111 ------------ # (literal)
and so we effectively ignore the value of bit 5. (This is a
permitted option for this CONSTRAINED UNPREDICTABLE.) This isn't a
behaviour change in this commit, since we previously had NOP lines
for both those patterns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-3-richard.henderson@linaro.org
[PMM: adjusted commit message to note that PLD (lit) T1 bit 5
being 1 is an UNPREDICTABLE case.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We wrongly encoded ID_AA64PFR1_EL1 using {3,0,0,4,2} in hvf_sreg_match[] so
we fail to get the expected ARMCPRegInfo from cp_regs hash table with the
wrong key.
Fix it with the correct encoding {3,0,0,4,1}. With that fixed, the Linux
guest can properly detect FEAT_SSBS2 on my M1 HW.
All DBG{B,W}{V,C}R_EL1 registers are also wrongly encoded with op0 == 14.
It happens to work because HVF_SYSREG(CRn, CRm, 14, op1, op2) equals to
HVF_SYSREG(CRn, CRm, 2, op1, op2), by definition. But we shouldn't rely on
it.
Cc: qemu-stable@nongnu.org
Fixes: a1477da3dd ("hvf: Add Apple Silicon support")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20240503153453.54389-1-zenghui.yu@linux.dev
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user/i386: Fix allocation and alignment of fp state in signal frame
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
0KPd/A==
=sYrE
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu into staging
target/i386: Introduce X86Access and use for xsave and friends
linux-user/i386: Fix allocation and alignment of fp state in signal frame
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
# MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
# oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
# rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
# EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
# bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
# 0KPd/A==
# =sYrE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 26 May 2024 05:48:44 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu: (28 commits)
target/i386: Pass host pointer and size to cpu_x86_{xsave,xrstor}
target/i386: Pass host pointer and size to cpu_x86_{fxsave,fxrstor}
target/i386: Pass host pointer and size to cpu_x86_{fsave,frstor}
target/i386: Convert do_xrstor to X86Access
target/i386: Convert do_xsave to X86Access
linux-user/i386: Honor xfeatures in xrstor_sigcontext
linux-user/i386: Fix allocation and alignment of fp state
linux-user/i386: Return boolean success from xrstor_sigcontext
linux-user/i386: Return boolean success from restore_sigcontext
linux-user/i386: Fix -mregparm=3 for signal delivery
linux-user/i386: Split out struct target_fregs_state
linux-user/i386: Replace target_fpstate_fxsave with X86LegacyXSaveArea
linux-user/i386: Remove xfeatures from target_fpstate_fxsave
linux-user/i386: Drop xfeatures_size from sigcontext arithmetic
target/i386: Add {hw,sw}_reserved to X86LegacyXSaveArea
target/i386: Add rbfm argument to cpu_x86_{xsave,xrstor}
target/i386: Split out do_xsave_chk
target/i386: Convert do_xrstor_* to X86Access
target/i386: Convert do_xsave_* to X86Access
tagret/i386: Convert do_fxsave, do_fxrstor to X86Access
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
In addition, return failure when the header contains invalid
xstate_bv. The kernel handles this via exception handling
within XSTATE_OP within xrstor_from_user_sigframe.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This completes the 512 byte structure, allowing the union to
be removed. Assert that the structure layout is as expected.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For now, continue to pass all 1's from signal.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This path is not required by user-only, and can in fact
be shared between xsave and xrstor.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The body of do_xrstor is now fully converted.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The body of do_xsave is now fully converted.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the alignment fault from do_* to helper_*, as it need
not apply to usage from within user-only signal handling.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide a method to amortize page lookup across large blocks.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZRy1gUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMTtQf/ZQskuqZyTrDhB/uVUT8oT5JNKQNS
GbFSgDK7jDdBeU3UmoYrlx9vfFR/mH5cA88MlusUy0SjQBNo4onD725o6Vvum/LW
DPe5ZyE34wvOasM7KXqJsD+2SttjaVjCXN4ip+E9WL5By2TWJgrk6IgTtvAhT9cd
LWb5OEIInaq7ZiWz3EpjmGvZd0M4mxqXi5OeDvmoFyf38xElfbWZWbfhJv+H5L1X
stivPBtUbXOzh63NL491hUYQtiAWlow8Qcnn7CYRflb6Vdd4QPK+6W8FX5KyU2eC
bXRXloW7wjEAC9pyiVky1SCvtNg7AVFL+9kxwiGreoZfo+/IMA+NP6pGOg==
=hpWy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
Build system and target/i386/translate.c cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZRy1gUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMTtQf/ZQskuqZyTrDhB/uVUT8oT5JNKQNS
# GbFSgDK7jDdBeU3UmoYrlx9vfFR/mH5cA88MlusUy0SjQBNo4onD725o6Vvum/LW
# DPe5ZyE34wvOasM7KXqJsD+2SttjaVjCXN4ip+E9WL5By2TWJgrk6IgTtvAhT9cd
# LWb5OEIInaq7ZiWz3EpjmGvZd0M4mxqXi5OeDvmoFyf38xElfbWZWbfhJv+H5L1X
# stivPBtUbXOzh63NL491hUYQtiAWlow8Qcnn7CYRflb6Vdd4QPK+6W8FX5KyU2eC
# bXRXloW7wjEAC9pyiVky1SCvtNg7AVFL+9kxwiGreoZfo+/IMA+NP6pGOg==
# =hpWy
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 25 May 2024 04:28:24 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
migration: remove unnecessary zlib dependency
meson: do not query modules before they are processed
tcg: include dependencies in static_library()
meson: remove unnecessary dependency
meson: remove unnecessary reference to libm
target/i386: remove aflag argument of gen_lea_v_seg
target/i386: clean up repeated string operations
target/i386: introduce gen_lea_ss_ofs
target/i386: use mo_stacksize more
target/i386: inline gen_add_A0_ds_seg
target/i386: split gen_ldst_modrm for load and store
target/i386: reg in gen_ldst_modrm is always OR_TMP0
target/i386: raze the gen_eob* jungle
target/i386: assert that gen_update_eip_cur and gen_update_eip_next are the same in tb_stop
target/i386: avoid calling gen_eob_inhibit_irq before tb_stop
target/i386: avoid calling gen_eob_syscall before tb_stop
target/i386: document and group DISAS_* constants
target/i386: set CC_OP in helpers if they want CC_OP_EFLAGS
target/i386: cpu_load_eflags already sets cc_op
target/i386: remove unnecessary gen_update_cc_op before gen_eob*
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not bother generating inline wrappers for gen_repz and gen_repz2;
use s->prefix to separate REPZ from REPNZ in the case of SCAS and
CMPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize gen_stack_A0() to include an initial add and to use an arbitrary
destination. This is a common pattern and it is not a huge burden to
add the extra arguments to the only caller of gen_stack_A0().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use mo_stacksize for all stack accesses, including when
a 64-bit code segment is impossible and the code is
therefore checking only for SS32(s).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is only used in MONITOR, where a direct call of gen_lea_v_seg
is simpler, and in XLAT. Inline it in the latter.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The is_store argument of gen_ldst_modrm has only ever been passed
a constant. Just split the function in two.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Values other than OR_TMP0 were only ever used by MOV and MOVNTI
opcodes. Now that these have been converted to the new decoder,
remove the argument.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make gen_eob take the DISAS_* constant as an argument, so that
it is not necessary to have wrappers around it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is an invariant now that there are no calls to gen_eob_inhibit_irq()
outside tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sti only has one exit, so it does not need to generate the
end-of-translation code inline. It can be deferred to tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
syscall and sysret only have one exit, so they do not need to
generate the end-of-translation code inline. It can be
deferred to tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place DISAS_* constants that update cpu_eip first, and
the "jump" ones last. Add comments explaining the differences
and usage.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark cc_op as clean and do not spill it at the end of the translation block.
Technically this is a tiny bit less efficient, but:
* it results in translations that are a tiny bit smaller
* for most of these instructions, it is not unlikely that they are close to
the end of the basic block, in which case cc_op would not be overwritten
* anyway the cost is probably dwarfed by that of computing flags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to set it again at the end of the translation block, cc_op_dirty
can be set to false.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already handled in gen_eob(). Before adding another DISAS_*
case, remove the double calls.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_helper_rsm cannot generate an exception, and reloads the flags.
So there's no need to spill cc_op and update cpu_eip, but on the
other hand cc_op must be reset to CC_OP_EFLAGS before returning.
It all works by chance, because by spilling cc_op before the call
to the helper, it becomes non-dirty and gen_eob will not overwrite
the CC_OP_EFLAGS value that is placed there by the helper. But
let's clean it up.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel SDM 18.3.1.4 "If an occurrence of the MOV or POP instruction
loads the SS register executes with EFLAGS.TF = 1, no single-step debug
exception occurs following the MOV or POP instruction."
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If EFLAGS.RF is 1, special processing in gen_eob_worker() is needed and
therefore goto_tb cannot be used.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ppc_hash32_pp_prot() function in mmu-hash32.c is the same as
pp_check() in mmu_common.c, merge these to remove duplicated code.
Define the common function as static lnline otherwise exporting the
function from mmu-hash32.c would stop the compiler inlining it which
results in slightly lower performance.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
[np: move ppc_hash32_pp_prot inline without changing it]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add a new mmu-booke.c file for BookE and related MMU bits from
mmu_common.c.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Checking if a page protection bit is set for a given access type is a
common operation. Add a function to avoid repeating the same check at
multiple places. As this relies on access type and page protection bit
values having certain relation also add an assert to ensure that this
assumption holds.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The value is only used once so no need to introduce a local variable
for it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc_hash32_xlate() the value of need_prop is checked in two places
but precalculating it does not help because when we reach the first
check we always return and not reach the second place so the value
will only be used once. We can drop the local variable and calculate
it when needed, which makes these checks using it similar to other
places with such checks.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Several 4xx CPUs and e200 share the same TLB settings enclosed in an
ifdef. Split it off in a common function to reduce code duplication
and the number of ifdefs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This flag for split instruction/data TLBs is only set for 6xx soft TLB
MMU model and not used otherwise so no need to have a separate flag
for that.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Remove mmu_ctx_t definition from internal.h as this type is only used
within mmu_common.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Now that only 6xx cases left in ppc_jumbo_xlate() we can change it
to ppc_6xx_xlate() also removing get_physical_address_wtlb().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_40x_xlate() to split off 40x handlning leaving only 6xx
in ppc_jumbo_xlate() now.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add ppc_real_mode_xlate() to handle real mode translation and allow
removing this case from ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Merge the code fetch and data access cases in a common switch.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move setting error_code that appears in every case out in front and
hoist the common fall through case for BOOKE206 as well which allows
removing the nested switches.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_booke_xlate() to handle BookE and BookE 2.06 cases to
reduce ppc_jumbo_xlate() further.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As BookE never returns -4 we can drop BookE from the direct store case
in ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke206_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmu40x_get_physical_address() only uses the raddr and prot fields from
mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The "2" in booke206_update_mas_tlb_miss() call corresponds to
MMU_INST_FETCH which is the value of access_type in this branch;
mmubooke206_esr() only checks for MMU_DATA_STORE and it's called from
code access so using MMU_DATA_LOAD here seems wrong so replace it with
access_type here as well that yields the same result. This also makes
these calls the same as the data access branch further down.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of putting a large block of code in an if, invert the
condition and return early to be able to deindent the code block.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fix several qemu_log_mask() calls that are misindented.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function just does two assignments and and unnecessary check that
is always true so inline it in the only caller left and remove it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The real mode handling is identical in the remaining switch cases.
Split off these common real mode cases into a separate conditional to
leave only the else branches in the switch that are different.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
BookE does not have real mode so split off and handle it first in
get_physical_address_wtlb() before checking for real mode for other
MMU models.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return directly, which is simpler than dragging a return value through
multpile if and else blocks.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the debug logging within ppc6xx_tlb_check() from after its only
call to simplify the caller.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() we have a large if block with a two
line else branch that effectively returns. Invert the condition and
move the else there to allow deindenting the large if block to make
the flow easier to follow.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Repurpose get_segment_6xx_tlb() to do the whole address translation
for POWERPC_MMU_SOFT_6xx MMU model by moving the BAT check there and
renaming it to match other similar functions. These are only called
once together so no need to keep these separate functions and
combining them simplifies the caller allowing further restructuring.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Drop MPC8xx cases from get_physical_address_wtlb() and ppc_jumbo_xlate().
The default case would still catch this and abort the same way and
there is still a warning about it in ppc_tlb_invalidate_all() which is
called in ppc_cpu_reset_hold() so likely we never get here but to make
sure add a case to ppc_xlate() to the same effect.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In get_physical_address_wtlb() the real_mode flag depends on either
the MSR[IR] or MSR[DR] bit depending on access_type. Extract just the
needed bit in a more straight forward way instead of doing unnecessary
computation.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() we can assign the
value of prot2 directly to the destination, no need to have a separate
local variable for it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() prot2 is
calculated first but only used after an unrelated check that can
return before tha value is used. Move the calculation after the check,
closer to where it is used, to keep them together and avoid computing
it when not needed.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The helper_rac function is defined but not used, remove it.
Fixes: 005b69fdcc (target/ppc: Remove PowerPC 601 CPUs)
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
I think it's use was removed by
Commit 5883d8b296 ("mmu-hash*: Don't use full ppc_hash{32,
64}_translate() path for get_phys_page_debug()")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
msgsnd has a broadcast mode that sends hypervisor doorbells to all
threads belonging to the same core as the target. A "subcore" mode
sends to all or one thread depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This implements the POWER SPRC/SPRD SPRs, and SCRATCH0-7 registers that
can be accessed via these indirect SPRs.
SCRATCH registers only provide storage, but they are used by firmware
for low level crash and progress data, so this implementation logs
writes to the registers to help with analysis.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
LDBAR, TTR are a Power-specific SPRs. These simple implementations
are enough for IBM proprietary firmware for now.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
AMOR, MMCRC, HRMOR, TSCR, HMEER, RPR SPRs are per-core or per-LPAR
registers with simple (generic) implementations.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
An SPR can be either per-thread, per-core, or per-LPAR. Per-LPAR means
per-thread or per-core, depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
PPR32 provides access to the upper half of PPR.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
attn is an implementation-specific instruction that on POWER (and G5/
970) can be enabled with a HID bit (disabled = illegal), and executing
it causes the host processor to stop and the service processor to be
notified. Generally used for debugging.
Implement attn and make it checkstop the system, which should be good
enough for QEMU debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Change the logging not to print to stderr as well, because a
checkstop is a guest error (or perhaps a simulated machine error)
rather than a QEMU error, so send it to the log.
Update the checkstop message, and log CPU registers too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
checkstop state does not halt the system, interrupts continue to be
serviced, and other CPUs run. Make it stop the machine with
qemu_system_guest_panicked.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is a memop_size() function for this.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use DEF_MEMOP() consistently in larx and stcx. generation, and apply it
once when it's used rather than where the macros are expanded, to reduce
typing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds migration support for Branch History Rolling
Buffer (BHRB) internal state.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the clrbhrb and mfbhrbe instructions.
Since neither instruction is believed to be critical to
performance, both instructions were implemented using helper
functions.
Access to both instructions is controlled by bits in the
HFSCR (for privileged state) and MMCR0 (for problem state).
A new function, helper_mmcr0_facility_check, was added for
checking MMCR0[BHRBA] and raising a facility_unavailable exception
if required.
NOTE: For P8 and P9, due to a performance issue, branch history will
not be kept, but the instructions will be allowed to execute
as normal with the exception that the mfbhrbe instruction will
always return a zero value.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This commit continues adding support for the Branch History
Rolling Buffer (BHRB) as is provided starting with the P8
processor and continuing with its successors. This commit
is limited to the recording and filtering of taken branches.
The following changes were made:
- Enabled functionality on P10 processors only due to
performance impact seen with P8 and P9 where it is not
disabled for non problem state branches.
- Added a BHRB buffer for storing branch instruction and
target addresses for taken branches
- Renamed gen_update_cfar to gen_update_branch_history and
added a 'target' parameter to hold the branch target
address and 'inst_type' parameter to use for filtering
- Added TCG code to gen_update_branch_history that stores
data to the BHRB and updates the BHRB offset.
- Added BHRB resource initialization and reset functions
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This commit is preparatory to the addition of Branch History
Rolling Buffer (BHRB) functionality, which is being provided
today starting with the P8 processor.
BHRB uses several SPR register fields to control whether or not
a branch instruction's address (and sometimes target address)
should be recorded. Checking each of these fields with each
branch instruction using jitted code would lead to a significant
decrease in performance.
Therefore, it was decided that BHRB configuration bits that are
not expected to change frequently should have their state summarized
in an hflag so that the amount of checking done by jitted code can
be reduced.
This commit contains the changes for summarizing the state of the
following register fields in the HFLAGS_BHRB_ENABLE hflag:
MMCR0[FCP] - Determines if BHRB recording is frozen in the
problem state
MMCR0[FCPC] - A modifier for MMCR0[FCP]
MMCRA[BHRBRD] - Disables all BHRB recording for a thread
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
v{max, min}{u, s}{b, h, w, d} : VX-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
v{and, andc, nand, or, orc, nor, xor, eqv} : VX-form
The changes were verified by validating that the tcp ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l,st}ve{b,h,w}x,
{l,st}v{x,xl},
lvs{l,r} : X-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
andi[s]., {ori, xori}[s] : D-form
{and, andc, nand, or, orc, nor, xor, eqv}[.],
exts{b, h, w}[.], cnt{l, t}z{w, d}[.],
popcnt{b, w, d}, prty{w, d}, cmp, bpermd : X-form
With this patch, all the fixed-point logical instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
cmp{rb, eqb}, t{w, d} : X-form
t{w, d}i : D-form
isel : A-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also for CMPRB, following review comments :
Replaced repetition of arithmetic right shifting (tcg_gen_shri_i32) followed
by extraction of last 8 bits (tcg_gen_ext8u_i32) with extraction of the required
bits using offsets (tcg_gen_extract_i32).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
divd[u, e, eu][o][.] : XO-form
mod{sd, ud} : X-form
With this patch, all the fixed-point arithmetic instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also, remaned do_divwe method in fixedpoint-impl.c.inc to do_dive because it is
now used to divide doubleword operands as well, and not just words.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree :
mul{ld, ldo, hd, hdu}[.] : XO-form
madd{hd, hdu, ld} : VA-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op'
flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
neg[o][.] : XO-form
mod{sw, uw}, darn : X-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
divw[u, e, eu][o][.] : XO-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The handler methods for divw[u] instructions internally use Rc(ctx->opcode),
for extraction of Rc field of instructions, which poses a problem if we move
the above said instructions to decodetree, as the ctx->opcode field is not
popluated in decodetree. Hence, making it decodetree compatible, so that the
mentioned insns can be safely move to decodetree specs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
mulli : D-form
mul{lw, lwo, hw, hwu}[.] : XO-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Also cleaned up code for mullw[o][.] as per review comments while
keeping the logic of the tcg ops generated semantically same.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This patch moves the below instructions to decodetree specification :
f{add, sub, mul, div, re, rsqrte, madd, msub, nmadd, nmsub}[s][.] : A-form
ft{div, sqrt} : X-form
With this patch, all the floating-point arithmetic instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This patch merges the definitions of the following set of fpu helper methods,
which are similar, using macros :
1. f{add, sub, mul, div}(s)
2. fre(s)
3. frsqrte(s)
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER10 adds a new field to sync for store-store syncs, and some
new variants of the existing syncs that include persistent memory.
Implement the store-store syncs and plwsync/phwsync.
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Memory barriers are supposed to do something on BookE systems, these
were probably just missed during MTTCG enablement, maybe no targets
support SMP. Either way, add proper BookE implementations.
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This tries to faithfully reproduce the odd BookE logic. Note the
e206 check in gen_msync_4xx() is always false, so not carried over.
It does change the handling of non-zero reserved bits outside the
defined fields from being illegal to being ignored, which the
architecture specifies ot help with backward compatibility of new
fields. The existing behaviour causes illegal instruction exceptions
when using new POWER10 sync variants that add new fields, after this
the instructions are accepted and are implemented as supersets of
the new behaviour, as intended.
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
With mttcg, broadcast tlbie instructions do not wait until other vCPUs
have been kicked out of TCG execution before they complete (including
necessary subsequent tlbsync, etc., instructions). This is contrary to
the ISA, and it permits other vCPUs to use translations after the TLB
flush. For example:
CPU0
// *memP is initially 0, memV maps to memP with *pte
*pte = 0;
ptesync ; tlbie ; eieio ; tlbsync ; ptesync
*memP = 1;
CPU1
assert(*memV == 0);
It is possible for the assertion to fail because CPU1 translates memV
using the TLB after CPU0 has stored 1 to the underlying memory. This
race was observed with a careful test case where CPU1 checks run in a
very large expensive TB so it can run for the entire CPU0 period between
clearing the pte and storing the memory, but host vCPU thread preemption
could cause the race to hit anywhere.
As explained in commit 4ddc104689 ("target/ppc: Fix tlbie"), it is not
enough to just use tlb_flush_all_cpus_synced(), because that does not
execute until the calling CPU has finished its TB. It is also required
that the TB is ended at the point where the TLB flush must subsequently
take effect.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
PPC_VIRTUAL_HYPERVISOR_GET_CLASS is used in critical operations like
interrupts and TLB misses and is quite costly. Running the
kvm-unit-tests sieve program with radix MMU enabled thrashes the TCG
TLB and spends a lot of time in TLB and page table walking code. The
test takes 67 seconds to complete with a lot of time being spent in
code related to finding the vhyp class:
12.01% [.] g_str_hash
8.94% [.] g_hash_table_lookup
8.06% [.] object_class_dynamic_cast
6.21% [.] address_space_ldq
4.94% [.] __strcmp_avx2
4.28% [.] tlb_set_page_full
4.08% [.] address_space_translate_internal
3.17% [.] object_class_dynamic_cast_assert
2.84% [.] ppc_radix64_xlate
Keep a pointer to the class and avoid this lookup. This reduces the
execution time to 40 seconds.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
=lp7q
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hw/i386/pc_sysfw: Alias rather than copy isa-bios region
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
# DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
# 7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
# lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
# g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
# t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
# =lp7q
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 10:58:40 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
target-i386: hyper-v: Correct kvm_hv_handle_exit return value
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[4]
i386: Add cache topology info in CPUCacheInfo
hw/i386/pc: Support smp.modules for x86 PC machine
tests: Add test case of APIC ID for module level parsing
i386/cpu: Introduce module-id to X86CPU
i386: Support module_id in X86CPUTopoIDs
i386: Expose module level in CPUID[0x1F]
i386: Support modules_per_die in X86CPUTopoInfo
i386: Introduce module level cpu topology to CPUX86State
i386/cpu: Decouple CPUID[0x1F] subleaf with specific topology level
i386: Split topology types of CPUID[0x1F] from the definitions of CPUID[0xB]
i386/cpu: Introduce bitmap to cache available CPU topology levels
i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid()
i386/cpu: Use APIC ID info get NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use APIC ID info to encode cache topo in CPUID[4]
i386/cpu: Fix i/d-cache topology to core level for Intel CPU
target/i386: add control bits support for LAM
target/i386: add support for LAM in CPUID enumeration
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently LSX/LASX vector property is decided by the default value.
Instead vector property should be added unconditionally, and it is
irrelative with its default value. If vector is disabled by default,
vector also can be enabled from command line.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240521080549.434197-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
On kvm side, get_fpu/set_fpu save the vreg registers high 192bits,
but QEMU missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240514110752.989572-1-gaosong@loongson.cn>
vmstate does not save kvm_state_conter,
which can cause VM recovery from disk to fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Song Gao <gaosong@loongson.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240508024732.3127792-1-gaosong@loongson.cn>
This bug fix addresses the incorrect return value of kvm_hv_handle_exit for
KVM_EXIT_HYPERV_SYNIC, which should be EXCP_INTERRUPT.
Handling of KVM_EXIT_HYPERV_SYNIC in QEMU needs to be synchronous.
This means that async_synic_update should run in the current QEMU vCPU
thread before returning to KVM, returning EXCP_INTERRUPT to guarantee this.
Returning 0 can cause async_synic_update to run asynchronously.
One problem (kvm-unit-tests's hyperv_synic test fails with timeout error)
caused by this bug:
When a guest VM writes to the HV_X64_MSR_SCONTROL MSR to enable Hyper-V SynIC,
a VM exit is triggered and processed by the kvm_hv_handle_exit function of the
QEMU vCPU. This function then calls the async_synic_update function to set
synic->sctl_enabled to true. A true value of synic->sctl_enabled is required
before creating SINT routes using the hyperv_sint_route_new() function.
If kvm_hv_handle_exit returns 0 for KVM_EXIT_HYPERV_SYNIC, the current QEMU
vCPU thread may return to KVM and enter the guest VM before running
async_synic_update. In such case, the hyperv_synic test’s subsequent call to
synic_ctl(HV_TEST_DEV_SINT_ROUTE_CREATE, ...) immediately after writing to
HV_X64_MSR_SCONTROL can cause QEMU’s hyperv_sint_route_new() function to return
prematurely (because synic->sctl_enabled is false).
If the SINT route is not created successfully, the SINT interrupt will not be
fired, resulting in a timeout error in the hyperv_synic test.
Fixes: 267e071bd6 (“hyperv: make overlay pages for SynIC”)
Suggested-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Message-ID: <20240521200114.11588-1-dongsheng.x.zhang@intel.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID[0x8000001D].EAX[bits 25:14] NumSharingCache: number of logical
processors sharing cache.
The number of logical processors sharing this cache is
NumSharingCache + 1.
After cache models have topology information, we can use
CPUCacheInfo.share_level to decide which topology level to be encoded
into CPUID[0x8000001D].EAX[bits 25:14].
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-22-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID[4].EAX[bits 25:14] is used to represent the cache topology for
Intel CPUs.
After cache models have topology information, we can use
CPUCacheInfo.share_level to decide which topology level to be encoded
into CPUID[4].EAX[bits 25:14].
And since with the helper max_processor_ids_for_cache(), the filed
CPUID[4].EAX[bits 25:14] (original virable "num_apic_ids") is parsed
based on cpu topology levels, which are verified when parsing -smp, it's
no need to check this value by "assert(num_apic_ids > 0)" again, so
remove this assert().
Additionally, wrap the encoding of CPUID[4].EAX[bits 31:26] into a
helper to make the code cleaner.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-21-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, by default, the cache topology is encoded as:
1. i/d cache is shared in one core.
2. L2 cache is shared in one core.
3. L3 cache is shared in one die.
This default general setting has caused a misunderstanding, that is, the
cache topology is completely equated with a specific cpu topology, such
as the connection between L2 cache and core level, and the connection
between L3 cache and die level.
In fact, the settings of these topologies depend on the specific
platform and are not static. For example, on Alder Lake-P, every
four Atom cores share the same L2 cache.
Thus, we should explicitly define the corresponding cache topology for
different cache models to increase scalability.
Except legacy_l2_cache_cpuid2 (its default topo level is
CPU_TOPO_LEVEL_UNKNOW), explicitly set the corresponding topology level
for all other cache models. In order to be compatible with the existing
cache topology, set the CPU_TOPO_LEVEL_CORE level for the i/d cache, set
the CPU_TOPO_LEVEL_CORE level for L2 cache, and set the
CPU_TOPO_LEVEL_DIE level for L3 cache.
The field for CPUID[4].EAX[bits 25:14] or CPUID[0x8000001D].EAX[bits
25:14] will be set based on CPUCacheInfo.share_level.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240424154929.1487382-20-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce module-id to be consistent with the module-id field in
CpuInstanceProperties.
Following the legacy smp check rules, also add the module_id validity
into x86_cpu_pre_plug().
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-17-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux kernel (from v6.4, with commit edc0a2b595765 ("x86/topology: Fix
erroneous smp_num_siblings on Intel Hybrid platforms") is able to
handle platforms with Module level enumerated via CPUID.1F.
Expose the module level in CPUID[0x1F] if the machine has more than 1
modules.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-15-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support module level in i386 cpu topology structure "X86CPUTopoInfo".
Since x86 does not yet support the "modules" parameter in "-smp",
X86CPUTopoInfo.modules_per_die is currently always 1.
Therefore, the module level width in APIC ID, which can be calculated by
"apicid_bitwidth_for_count(topo_info->modules_per_die)", is always 0 for
now, so we can directly add APIC ID related helpers to support module
level parsing.
In addition, update topology structure in test-x86-topo.c.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-14-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel CPUs implement module level on hybrid client products (e.g.,
ADL-N, MTL, etc) and E-core server products.
A module contains a set of cores that share certain resources (in
current products, the resource usually includes L2 cache, as well as
module scoped features and MSRs).
Module level support is the prerequisite for L2 cache topology on
module level. With module level, we can implement the Guest's CPU
topology and future cache topology to be consistent with the Host's on
Intel hybrid client/E-core server platforms.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-13-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At present, the subleaf 0x02 of CPUID[0x1F] is bound to the "die" level.
In fact, the specific topology level exposed in 0x1F depends on the
platform's support for extension levels (module, tile and die).
To help expose "module" level in 0x1F, decouple CPUID[0x1F] subleaf
with specific topology level.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240424154929.1487382-12-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID[0xB] defines SMT, Core and Invalid types, and this leaf is shared
by Intel and AMD CPUs.
But for extended topology levels, Intel CPU (in CPUID[0x1F]) and AMD CPU
(in CPUID[0x80000026]) have the different definitions with different
enumeration values.
Though CPUID[0x80000026] hasn't been implemented in QEMU, to avoid
possible misunderstanding, split topology types of CPUID[0x1F] from the
definitions of CPUID[0xB] and introduce CPUID[0x1F]-specific topology
types.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-11-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU checks the specify number of topology domains to detect
if there's extended topology levels (e.g., checking nr_dies).
With this bitmap, the extended CPU topology (the levels other than SMT,
core and package) could be easier to detect without touching the
topology details.
This is also in preparation for the follow-up to decouple CPUID[0x1F]
subleaf with specific topology level.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240424154929.1487382-10-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In cpu_x86_cpuid(), there are many variables in representing the cpu
topology, e.g., topo_info, cs->nr_cores and cs->nr_threads.
Since the names of cs->nr_cores and cs->nr_threads do not accurately
represent its meaning, the use of cs->nr_cores or cs->nr_threads is
prone to confusion and mistakes.
And the structure X86CPUTopoInfo names its members clearly, thus the
variable "topo_info" should be preferred.
In addition, in cpu_x86_cpuid(), to uniformly use the topology variable,
replace env->dies with topo_info.dies_per_pkg as well.
Suggested-by: Robert Hoo <robert.hu@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-9-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The commit 8f4202fb10 ("i386: Populate AMD Processor Cache Information
for cpuid 0x8000001D") adds the cache topology for AMD CPU by encoding
the number of sharing threads directly.
From AMD's APM, NumSharingCache (CPUID[0x8000001D].EAX[bits 25:14])
means [1]:
The number of logical processors sharing this cache is the value of
this field incremented by 1. To determine which logical processors are
sharing a cache, determine a Share Id for each processor as follows:
ShareId = LocalApicId >> log2(NumSharingCache+1)
Logical processors with the same ShareId then share a cache. If
NumSharingCache+1 is not a power of two, round it up to the next power
of two.
From the description above, the calculation of this field should be same
as CPUID[4].EAX[bits 25:14] for Intel CPUs. So also use the offsets of
APIC ID to calculate this field.
[1]: APM, vol.3, appendix.E.4.15 Function 8000_001Dh--Cache Topology
Information
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240424154929.1487382-8-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refer to the fixes of cache_info_passthrough ([1], [2]) and SDM, the
CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits 31:26] should use the
nearest power-of-2 integer.
The nearest power-of-2 integer can be calculated by pow2ceil() or by
using APIC ID offset/width (like L3 topology using 1 << die_offset [3]).
But in fact, CPUID.04H:EAX[bits 25:14] and CPUID.04H:EAX[bits 31:26]
are associated with APIC ID. For example, in linux kernel, the field
"num_threads_sharing" (Bits 25 - 14) is parsed with APIC ID. And for
another example, on Alder Lake P, the CPUID.04H:EAX[bits 31:26] is not
matched with actual core numbers and it's calculated by:
"(1 << (pkg_offset - core_offset)) - 1".
Therefore the topology information of APIC ID should be preferred to
calculate nearest power-of-2 integer for CPUID.04H:EAX[bits 25:14] and
CPUID.04H:EAX[bits 31:26]:
1. d/i cache is shared in a core, 1 << core_offset should be used
instead of "cs->nr_threads" in encode_cache_cpuid4() for
CPUID.04H.00H:EAX[bits 25:14] and CPUID.04H.01H:EAX[bits 25:14].
2. L2 cache is supposed to be shared in a core as for now, thereby
1 << core_offset should also be used instead of "cs->nr_threads" in
encode_cache_cpuid4() for CPUID.04H.02H:EAX[bits 25:14].
3. Similarly, the value for CPUID.04H:EAX[bits 31:26] should also be
calculated with the bit width between the package and SMT levels in
the APIC ID (1 << (pkg_offset - core_offset) - 1).
In addition, use APIC ID bits calculations to replace "pow2ceil()" for
cache_info_passthrough case.
[1]: efb3934adf ("x86: cpu: make sure number of addressable IDs for processor cores meets the spec")
[2]: d7caf13b5f ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache")
[3]: d65af288a8 ("i386: Update new x86_apicid parsing rules with die_offset support")
Fixes: 7e3482f824 ("i386: Helpers to encode cache information consistently")
Suggested-by: Robert Hoo <robert.hu@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-7-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For i-cache and d-cache, current QEMU hardcodes the maximum IDs for CPUs
sharing cache (CPUID.04H.00H:EAX[bits 25:14] and CPUID.04H.01H:EAX[bits
25:14]) to 0, and this means i-cache and d-cache are shared in the SMT
level.
This is correct if there's single thread per core, but is wrong for the
hyper threading case (one core contains multiple threads) since the
i-cache and d-cache are shared in the core level other than SMT level.
For AMD CPU, commit 8f4202fb10 ("i386: Populate AMD Processor Cache
Information for cpuid 0x8000001D") has already introduced i/d cache
topology as core level by default.
Therefore, in order to be compatible with both multi-threaded and
single-threaded situations, we should set i-cache and d-cache be shared
at the core level by default.
This fix changes the default i/d cache topology from per-thread to
per-core. Potentially, this change in L1 cache topology may affect the
performance of the VM if the user does not specifically specify the
topology or bind the vCPU. However, the way to achieve optimal
performance should be to create a reasonable topology and set the
appropriate vCPU affinity without relying on QEMU's default topology
structure.
Fixes: 7e3482f824 ("i386: Helpers to encode cache information consistently")
Suggested-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240424154929.1487382-6-zhao1.liu@intel.com>
[Add compat property. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LAM uses CR3[61] and CR3[62] to configure/enable LAM on user pointers.
LAM uses CR4[28] to configure/enable LAM on supervisor pointers.
For CR3 LAM bits, no additional handling needed:
- TCG
LAM is not supported for TCG of target-i386. helper_write_crN() and
helper_vmrun() check max physical address bits before calling
cpu_x86_update_cr3(), no change needed, i.e. CR3 LAM bits are not allowed
to be set in TCG.
- gdbstub
x86_cpu_gdb_write_register() will call cpu_x86_update_cr3() to update cr3.
Allow gdb to set the LAM bit(s) to CR3, if vcpu doesn't support LAM,
KVM_SET_SREGS will fail as other reserved bits.
For CR4 LAM bit, its reservation depends on vcpu supporting LAM feature or
not.
- TCG
LAM is not supported for TCG of target-i386. helper_write_crN() and
helper_vmrun() check CR4 reserved bit before calling cpu_x86_update_cr4(),
i.e. CR4 LAM bit is not allowed to be set in TCG.
- gdbstub
x86_cpu_gdb_write_register() will call cpu_x86_update_cr4() to update cr4.
Mask out LAM bit on CR4 if vcpu doesn't support LAM.
- x86_cpu_reset_hold() doesn't need special handling.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240112060042.19925-3-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linear Address Masking (LAM) is a new Intel CPU feature, which allows
software to use of the untranslated address bits for metadata.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[26]
Add CPUID definition for LAM.
Note LAM feature is not supported for TCG of target-i386, LAM CPIUD bit
will not be added to TCG_7_1_EAX_FEATURES.
More info can be found in Intel ISE Chapter "LINEAR ADDRESS MASKING(LAM)"
https://cdrdv2.intel.com/v1/dl/getContent/671368
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Co-developed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240112060042.19925-2-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 32-bit AAM/AAD opcodes are using helpers that read and write flags and
env->regs[R_EAX]. Clean them up so that the table correctly includes AX
as a 16-bit input and output.
No real reason to do it to be honest, but they are nice one-output helpers
and it removes the masking of env->regs[R_EAX] that generic load/writeback
code already does.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240522123912.608497-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_rot_carry and gen_rot_overflow are meant to be called with count == NULL
if the count cannot be zero. However this is not done in gen_ROL and gen_ROR,
and writing everywhere "can_be_zero ? count : NULL" is burdensome and less
readable. Just pass can_be_zero as a separate argument.
gen_RCL and gen_RCR use a conditional branch to skip the computation
if count is zero, so they can pass false unconditionally to gen_rot_overflow.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240522123914.608516-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use TCG_COND_TST where applicable.
- Use CF_BP_PAGE instead of a local breakpoint search.
- Clean up IAOQ handling during translation.
- Implement CF_PCREL.
- Implement PSW.B.
- Implement PSW.X.
- Log cpu state on interrupt and rfi.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZEgnwdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+43gf8CakQdMSqfGV2nGP+
7wWZOAV04IyfkJ38F/CH0ihUkblEOzXJ1shTFkrHEw257j0D10MctSSbjrqz5BwU
obQcwoVlxzTGXqzhkZ6wagkcqjv3TtlPtznZIk6JssdlrtwIKDmE2/3t1dzHnyBD
WTrS0SK3YvVRovq/ai51raUbiBsNq7XG3skHEsMKsFxp4EaDP5JTbputdQWdffjh
TBmXImhHC3gm09KWIUZwfEBHlaa7YXk2orzB8kBE8S2kQj9vrGXEaC4jYnBcQLPw
NDDkBYRqxHYQr0vIAHee+5cUgt1jDBr5rXnAnJwzK0wyEEc4Mi4OTPhNE604iu2y
SDxS8Q==
=A4Qf
-----END PGP SIGNATURE-----
Merge tag 'pull-hppa-20240515' of https://gitlab.com/rth7680/qemu into staging
target/hppa:
- Use TCG_COND_TST where applicable.
- Use CF_BP_PAGE instead of a local breakpoint search.
- Clean up IAOQ handling during translation.
- Implement CF_PCREL.
- Implement PSW.B.
- Implement PSW.X.
- Log cpu state on interrupt and rfi.
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZEgnwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+43gf8CakQdMSqfGV2nGP+
# 7wWZOAV04IyfkJ38F/CH0ihUkblEOzXJ1shTFkrHEw257j0D10MctSSbjrqz5BwU
# obQcwoVlxzTGXqzhkZ6wagkcqjv3TtlPtznZIk6JssdlrtwIKDmE2/3t1dzHnyBD
# WTrS0SK3YvVRovq/ai51raUbiBsNq7XG3skHEsMKsFxp4EaDP5JTbputdQWdffjh
# TBmXImhHC3gm09KWIUZwfEBHlaa7YXk2orzB8kBE8S2kQj9vrGXEaC4jYnBcQLPw
# NDDkBYRqxHYQr0vIAHee+5cUgt1jDBr5rXnAnJwzK0wyEEc4Mi4OTPhNE604iu2y
# SDxS8Q==
# =A4Qf
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 May 2024 11:38:04 AM CEST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-hppa-20240515' of https://gitlab.com/rth7680/qemu: (43 commits)
target/hppa: Log cpu state on return-from-interrupt
target/hppa: Log cpu state at interrupt
target/hppa: Implement CF_PCREL
target/hppa: Adjust priv for B,GATE at runtime
target/hppa: Drop tlb_entry return from hppa_get_physical_address
target/hppa: Implement PSW_X
target/hppa: Implement PSW_B
target/hppa: Manage PSW_X and PSW_B in translator
target/hppa: Split PSW X and B into their own field
target/hppa: Improve hppa_cpu_dump_state
target/hppa: Do not mask in copy_iaoq_entry
target/hppa: Store full iaoq_f and page offset of iaoq_b in TB
linux-user/hppa: Force all code addresses to PRIV_USER
target/hppa: Use delay_excp for conditional trap on overflow
target/hppa: Use delay_excp for conditional traps
target/hppa: Introduce DisasDelayException
target/hppa: Remove cond_free
target/hppa: Use TCG_COND_TST* in trans_ftest
target/hppa: Use registerfields.h for FPSR
target/hppa: Use TCG_COND_TST* in trans_bb_imm
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that the groundwork has been laid, enabling CF_PCREL within the
translator proper is a simple matter of updating copy_iaoq_entry
and install_iaq_entries.
We also need to modify the unwind info, since we no longer have
absolute addresses to install.
As expected, this reduces the runtime overhead of compilation when
running a Linux kernel with address space randomization enabled.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not compile in the priv change based on the first translation;
look up the PTE at execution time. This is required for CF_PCREL,
where a page may be mapped multiple times with different attributes.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The return-by-reference is never used.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use PAGE_WRITE_INV to temporarily enable write permission
on for a given page, driven by PSW_X being set.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PSW_B causes B,GATE to trap as an illegal instruction, removing our
previous sequential execution test that was merely an approximation.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PSW_X is cleared after every instruction, and only set by RFI.
PSW_B is cleared after every non-branch, or branch not taken,
and only set by taken branches. We can clear both bits with a
single store, at most once per TB. Taken branches set PSW_B,
at most once per TB.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Generally, both of these bits are cleared at the end of each
instruction. By separating these, we will be able to clear
both with a single insn, instead of 2 or 3.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Print both raw IAQ_Front and IAQ_Back as well as the GVAs.
Print control registers in system mode.
Print floating point registers if CPU_DUMP_FPU.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As with loads and stores, code offsets are kept intact until the
full gva is formed. In qemu, this is in cpu_get_tb_cpu_state.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for CF_PCREL. store the iaoq_f in 3 parts: high
bits in cs_base, middle bits in pc, and low bits in priv.
For iaoq_b, set a bit for either of space or page differing,
else the page offset.
Install iaq entries before goto_tb. The change to not record
the full direct branch difference in TB means that we have to
store at least iaoq_b before goto_tb. But since a later change
to enable CF_PCREL will require both iaoq_f and iaoq_b to be
updated before goto_tb, go ahead and update both fields now.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The kernel does this along the return path to user mode.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow an exception to be emitted at the end of the TranslationBlock,
leaving only the conditional branch inline. Use it for simple
exception instructions like break, which happen to be nullified.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we do not need to free tcg temporaries, the only
thing cond_free does is reset the condition to never.
Instead, simply write a new condition over the old, which
may be simply cond_make_f() for the never condition.
The do_*_cond functions do the right thing with c or cf == 0,
so there's no need for a special case anymore.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define all of the context dependent field definitions.
Use FIELD_EX32 and FIELD_DP32 with named fields instead
of extract32 and deposit32 with raw constants.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can directly test bits of a 32-bit comparison without
zero or sign-extending an intermediate result.
We can directly test bit 0 for odd/even.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can directly test bits of a 32-bit comparison without
zero or sign-extending an intermediate result.
We can directly test bit 0 for odd/even.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use 'v' for a variable that needs copying, 't' for a temp that
doesn't need copying, and 'i' for an immediate, and use this
naming for both arguments of the comparison. So:
cond_make_tmp -> cond_make_tt
cond_make_0_tmp -> cond_make_ti
cond_make_0 -> cond_make_vi
cond_make -> cond_make_vv
Pass 0 explictly, rather than implicitly in the function name.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a first step in enabling CF_PCREL, but for now
we regenerate the absolute address before writeback.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wrap offset and space together in one structure, ensuring
that they're copied together as required.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This simplifies callers, which might otherwise have
to make another copy.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using umax is clearer than the same operation using movcond.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows unification of BE, BLR, BV, BVE with a common helper.
Since we can now track space with IAQ_Next, we can now let the
TranslationBlock continue across the delay slot with BE, BVE.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move space assighments to a central location.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add variable to track space changes to IAQ. So far, no such changes
are introduced, but the new checks vs ctx->iasq_b may eliminate an
unnecessary copy to cpu_iasq_f with e.g. BLR.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Minimize the amount of code in hppa_tr_translate_insn advancing the
insn queue for the next insn. Move the goto_tb path to hppa_tr_tb_stop.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We no longer have to allocate a temp and perform an
addition before translation of the rest of the insn.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a common routine for writing the return address.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of two separate cpu_iaoq_entry calls, use one call to update
both IAQ_Front and IAQ_Back. Simplify with an argument combination
that automatically handles a simple increment from Front to Back.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The generic tcg driver will have already checked for breakpoints.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the function by not attempting a conditional move
on the branch destination -- just use nullify_over normally.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass a displacement instead of an absolute value.
In trans_be, remove the user-only do_dbranch case. The branch we are
attempting to optimize is to the zero page, which is perforce on a
different page than the code currently executing, which means that
we will *not* use a goto_tb. Use a plain indirect branch instead,
which is what we got out of the attempted direct branch anyway.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Share this check between gen_goto_tb and hppa_tr_translate_insn.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is for log_pc(), which needs to produce a
similar result to cpu_get_tb_cpu_state().
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ilen value extracted from ex_value is the length of the
EXECUTE instruction itself, and so is the increment to the pc.
However, the length of the synthetic insn is located in the
opcode like all other instructions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace translator_fake_ldb, which required multiple calls,
with translator_fake_ld, which can take all data at once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have eliminated most uses of this hook. Reduce
further by allowing the hook to handle only the
special cases, returning false for normal processing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Almost all of the disas_log implementations are identical.
Unify them within translator_loop.
Drop extra Priv/Virt logging from target/riscv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The local APIC is a part of the CPU and has callbacks that are invoked
from multiple accelerators.
The IOAPIC on the other hand is optional, but ioapic_eoi_broadcast is
used by common x86 code to implement the IOAPIC's implicit EOI mode.
Add a stub in case the IOAPIC device is not included but the APIC is.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function has no dependency on the virtio-ccw machine type, though it
assumes that the CPU address corresponds to the core_id and the index.
If there is any need of something different or more fancy (unlikely)
S390 can include a MachineClass subclass and implement it there. For
now, move it to sigp.c for simplicity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VMX feature bit depends on general availability of WAITPKG,
not the other way round.
Fixes: 33cc88261c ("target/i386: add support for VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE", 2023-08-28)
Cc: qemu-stable@nongnu.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are trivial to add, and moving them to the new decoder fixes some
corner cases: raising #UD instead of an instruction fetch page fault for
the undefined opcodes, and incorrectly rejecting 0F 18 prefetches with
register operands (which are treated as reserved NOPs).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject 0x66/0xf3/0xf2 in front of them.
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the manual, 32-bit vs 64-bit is governed by REX.W
and REX ignores the 0x66 prefix. This can be confirmed with this
program:
#include <stdio.h>
int main()
{
int x = 0x12340000;
int y;
asm("popcntl %1, %0" : "=r" (y) : "r" (x)); printf("%x\n", y);
asm("mov $-1, %0; .byte 0x66; popcntl %1, %0" : "+r" (y) : "r" (x)); printf("%x\n", y);
asm("mov $-1, %0; .byte 0x66; popcntq %q1, %q0" : "+r" (y) : "r" (x)); printf("%x\n", y);
}
which prints 5/ffff0000/5 on real hardware and 5/ffff0000/ffff0000
on QEMU.
Cc: qemu-stable@nongnu.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PCOMMIT instruction was never included in any physical processor.
TCG implements it as a no-op instruction, but its utility is debatable
to say the least. Drop it from the decoder since it is only available
with "-cpu max", which does not guarantee migration compatibility
across versions, and deprecate the property just in case someone is
using it as "pcommit=off".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the CONSTRAINT_TRANSACTIONAL_EXE (cte) and TRANSACTIONAL_EXE (te)
to the list of deprecated features.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240429191059.11806-3-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Retain a list of deprecated features disjoint from any particular
CPU model. A query-cpu-model-expansion reply will now provide a list of
properties (i.e. features) that are flagged as deprecated. Example:
{
"return": {
"model": {
"name": "z14.2-base",
"deprecated-props": [
"bpb",
"csske"
],
"props": {
"pfmfi": false,
"exrl": true,
...a lot more props...
"skey": false,
"vxpdeh2": false
}
}
}
}
It is recommended that s390 guests operate with these features
explicitly disabled to ensure compatibility with future hardware.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240429191059.11806-2-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
=RLFu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240509
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
# 33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
# DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
# 4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
# =RLFu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 May 2024 10:02:10 AM CEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu:
target/loongarch: Put cpucfg operation before CSR register
target/loongarch: Add TCG macro in structure CPUArchState
hw/loongarch: Refine default numa id calculation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On Loongarch, cpucfg is register for cpu feature, some other registers
depend on cpucfg feature such as perf CSR registers. Here put cpucfg
read/write operations before CSR register, so that KVM knows how many
perf CSR registers are valid from pre-set cpucfg feature information.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240428031651.1354587-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In structure CPUArchState some struct elements are only used in TCG
mode, and it is not used in KVM mode. Macro CONFIG_TCG is added to
make it simpiler in KVM mode, also there is the same modification
in c code when these structure elements are used.
When VM runs in KVM mode, TLB entries are not used and do not need
migrate. It is only useful when it runs in TCG mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240506011912.2108842-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
QEMU headers are relative to the include/ directory,
not to the project root directory. Remove "include/".
See also:
https://www.qemu.org/docs/master/devel/style.html#include-directives
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240507142737.95735-1-philmd@linaro.org>
Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
The old API took the size of the memory to duplicate as a guint,
whereas most memory functions take memory sizes as a gsize. This
made it easy to accidentally pass a gsize to g_memdup(). For large
values, that would lead to a silent truncation of the size from 64
to 32 bits, and result in a heap area being returned which is
significantly smaller than what the caller expects. This can likely
be exploited in various modules to cause a heap buffer overflow.
Replace g_memdup() by the safer g_memdup2() wrapper.
Trivially safe because the argument was directly from sizeof.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210903174510.751630-27-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY5z/QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1YQf/WMAoB/lR31fzu/Uh36hF1Ke/NHNU
gefqKRAol6xJXxavKH8ym9QMlCTzrCLVt0e8RalZH76gLqYOjRhSLSSL+gUo5HEo
lsGSfkDAH2pHO0ZjQUkXcjJQQKkH+4+Et8xtyPc0qmq4uT1pqQZRgOeI/X/DIFNb
sMoKaRKfj+dB7TSp3qCSOp77RqL13f4QTP8mUQ4XIfzDDXdTX5n8WNLnyEIKjoar
ge4U6/KHjM35hAjCG9Av/zYQx0E084r2N2OEy0ESYNwswFZ8XYzTuL4SatN/Otf3
F6eQZ7Q7n6lQbTA+k3J/jR9dxiSqVzFQnL1ePGoe9483UnxVavoWd0PSgw==
=jCyB
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: conversion of one byte opcodes to table-based decoder
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY5z/QUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1YQf/WMAoB/lR31fzu/Uh36hF1Ke/NHNU
# gefqKRAol6xJXxavKH8ym9QMlCTzrCLVt0e8RalZH76gLqYOjRhSLSSL+gUo5HEo
# lsGSfkDAH2pHO0ZjQUkXcjJQQKkH+4+Et8xtyPc0qmq4uT1pqQZRgOeI/X/DIFNb
# sMoKaRKfj+dB7TSp3qCSOp77RqL13f4QTP8mUQ4XIfzDDXdTX5n8WNLnyEIKjoar
# ge4U6/KHjM35hAjCG9Av/zYQx0E084r2N2OEy0ESYNwswFZ8XYzTuL4SatN/Otf3
# F6eQZ7Q7n6lQbTA+k3J/jR9dxiSqVzFQnL1ePGoe9483UnxVavoWd0PSgw==
# =jCyB
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 11:53:40 PM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (26 commits)
target/i386: remove duplicate prefix decoding
target/i386: split legacy decoder into a separate function
target/i386: decode x87 instructions in a separate function
target/i386: remove now-converted opcodes from old decoder
target/i386: port extensions of one-byte opcodes to new decoder
target/i386: move BSWAP to new decoder
target/i386: move remaining conditional operations to new decoder
target/i386: merge and enlarge a few ranges for call to disas_insn_new
target/i386: move C0-FF opcodes to new decoder (except for x87)
target/i386: generalize gen_movl_seg_T0
target/i386: move 60-BF opcodes to new decoder
target/i386: allow instructions with more than one immediate
target/i386: extract gen_far_call/jmp, reordering temporaries
target/i386: move 00-5F opcodes to new decoder
target/i386: reintroduce debugging mechanism
target/i386: cleanup *gen_eob*
target/i386: clarify the "reg" argument of functions returning CCPrepare
target/i386: do not use s->T0 and s->T1 as scratch registers for CCPrepare
target/i386: extend cc_* when using them to compute flags
target/i386: pull cc_op update to callers of gen_jmp_rel{,_csize}
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that a bulk of opcodes go through the new decoder, it is sensible
to do some cleanup. Go immediately through disas_insn_new and only jump
back after parsing the prefixes.
disas_insn() now only contains the three sigsetjmp cases, and they
are more easily managed if they are inlined into i386_tr_translate_insn.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split the bits that have some duplication with disas_insn_new, from
those that should be the main topic of the conversion. This is the
first step towards removing duplicate decoding of prefixes between
disas_insn and disas_insn_new.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are unlikely to be converted to the table-based decoding
soon (perhaps there could be generic ESC decoding in decode-new.c.inc
for the Mod/RM byte, but not operand decoding), so keep them separate
from the remaining legacy-decoded instructions.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Send all converted opcodes to disas_insn_new() directly from the big
decoding switch statement; once more, the debugging/bisecting logic
disappears.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A few two-byte opcodes are simple extensions of existing one-byte opcodes;
they are easy to decode and need no change to emit.c.inc. Port them to
the new decoder.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move long-displacement Jcc, SETcc and CMOVcc to the new decoder.
While filling in the tables makes the code seem longer, the new
emitters are all just one line of code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since new opcodes are not going to be added in translate.c, round the
case labels that call to disas_insn_new(), including whole sets of
eight opcodes when possible.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The shift instructions are rewritten instead of reusing code from the old
decoder. Rotates use CC_OP_ADCOX more extensively and generally rely
more on the optimizer, so that the code generators are shared between
the immediate-count and variable-count cases.
In particular, this makes gen_RCL and gen_RCR pretty efficient for the
count == 1 case, which becomes (apart from a few extra movs) something like:
(compute_cc_all if needed)
// save old value for OF calculation
mov cc_src2, T0
// the bulk of RCL is just this!
deposit T0, cc_src, T0, 1, TARGET_LONG_BITS - 1
// compute carry
shr cc_dst, cc_src2, length - 1
and cc_dst, cc_dst, 1
// compute overflow
xor cc_src2, cc_src2, T0
extract cc_src2, cc_src2, length - 1, 1
32-bit MUL and IMUL are also slightly more efficient on 64-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the new decoder it is sometimes easier to put the segment
in T1 instead of T0, usually because another operand was loaded
by common code in T0. Genrealize gen_movl_seg_T0 to allow
using any source.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to the old decoder, the main differences in translation
are for the little-used ARPL instruction. IMUL is adjusted a bit
to share more code to produce flags, but is otherwise very similar.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While keeping decode->immediate for convenience and for 4-operand instructions,
store the immediate in X86DecodedOp as well. This enables instructions
with more than one immediate such as ENTER. It can also be used for far
calls and jumps.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the code into new functions, and swap T0/T1 so that T0 corresponds
to the first immediate in the instruction stream.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new wrapper for syscall/sysret, and do not go through multiple
layers of wrappers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using s->T0 or s->T1, create a scratch register
when computing the C, NC, L or LE conditions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using s->tmp0 or s->tmp4 as the result, just extend the cc_*
registers in place. It is harmless and, if multiple setcc instructions
are used, the optimizer will be able to remove the redundant ones.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_update_cc_op must be called before control flow splits. Doing it
in gen_jmp_rel{,_csize} may hide bugs, instead assert that cc_op is
clean---even if that means a few more calls to gen_update_cc_op().
With this new invariant, setting cc_op to CC_OP_DYNAMIC is unnecessary
since the caller should have done it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_update_cc_op must be called before control flow splits. Do it
where the jump on ECX!=0 is translated.
On the other hand, remove the call before gen_jcc1, which takes care of
it already, and explain why REPZ/REPNZ need not use CC_OP_DYNAMIC---the
translation block ends before any control-flow-dependent cc_op could
be observed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Resetting cc_op to CC_OP_DYNAMIC should be done at control flow junctions,
which is not the case here. This translation block is ending and the
only effect of calling set_cc_op() would be a discard of s->cc_srcT.
This discard is useless (it's a temporary, not a global) and in fact
prevents gen_prepare_cc from returning s->cc_srcT.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the introduction of TSTEQ and TSTNE the .mask field is always -1,
so remove all the now-unnecessary code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new conditions obviously come in handy when testing individual bits
of EFLAGS, and they make it possible to remove the .mask field of
CCPrepare.
Lowering to shift+and is done by the optimizer if necessary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When testing the sign bit or equality to zero of a partial register, it
is useful to use a single TSTEQ or TSTNE operation. It can also be used
to test the parity flag, using bit 0 of the population count.
Do not do this for target_ulong-sized values however; the optimizer would
produce a comparison against zero anyway, and it avoids shifts by 64
which are undefined behavior.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Observed the following failure while booting the SEV-SNP guest and the
guest fails to boot with the smp parameters:
"-smp 192,sockets=1,dies=12,cores=8,threads=2".
qemu-system-x86_64: sev_snp_launch_update: SNP_LAUNCH_UPDATE ret=-5 fw_error=22 'Invalid parameter'
qemu-system-x86_64: SEV-SNP: CPUID validation failed for function 0x8000001e, index: 0x0.
provided: eax:0x00000000, ebx: 0x00000100, ecx: 0x00000b00, edx: 0x00000000
expected: eax:0x00000000, ebx: 0x00000100, ecx: 0x00000300, edx: 0x00000000
qemu-system-x86_64: SEV-SNP: failed update CPUID page
Reason for the failure is due to overflowing of bits used for "Node per
processor" in CPUID Fn8000001E_ECX. This field's width is 3 bits wide and
can hold maximum value 0x7. With dies=12 (0xB), it overflows and spills
over into the reserved bits. In the case of SEV-SNP, this causes CPUID
enforcement failure and guest fails to boot.
The PPR documentation for CPUID_Fn8000001E_ECX [Node Identifiers]
=================================================================
Bits Description
31:11 Reserved.
10:8 NodesPerProcessor: Node per processor. Read-only.
ValidValues:
Value Description
0h 1 node per processor.
7h-1h Reserved.
7:0 NodeId: Node ID. Read-only. Reset: Fixed,XXh.
=================================================================
As in the spec, the valid value for "node per processor" is 0 and rest
are reserved.
Looking back at the history of decoding of CPUID_Fn8000001E_ECX, noticed
that there were cases where "node per processor" can be more than 1. It
is valid only for pre-F17h (pre-EPYC) architectures. For EPYC or later
CPUs, the linux kernel does not use this information to build the L3
topology.
Also noted that the CPUID Function 0x8000001E_ECX is available only when
TOPOEXT feature is enabled. This feature is enabled only for EPYC(F17h)
or later processors. So, previous generation of processors do not not
enumerate 0x8000001E_ECX leaf.
There could be some corner cases where the older guests could enable the
TOPOEXT feature by running with -cpu host, in which case legacy guests
might notice the topology change. To address those cases introduced a
new CPU property "legacy-multi-node". It will be true for older machine
types to maintain compatibility. By default, it will be false, so new
decoding will be used going forward.
The documentation is taken from Preliminary Processor Programming
Reference (PPR) for AMD Family 19h Model 11h, Revision B1 Processors 55901
Rev 0.25 - Oct 6, 2022.
Cc: qemu-stable@nongnu.org
Fixes: 31ada106d8 ("Simplify CPUID_8000_001E for AMD")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-ID: <0ee4b0a8293188a53970a2b0e4f4ef713425055e.1714757834.git.babu.moger@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Match the extra inserts of INDEX_op_insn_start, fixing
the db->num_insns != 1 assert in translator_loop.
Fixes: dcd092a063 ("accel/tcg: Improve can_do_io management")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmY4wZceHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIftQsH+wfIWymTdQMowfM6
Ze/T8KODn+MqU5eg25VPSTojnmr7LFaCj2yK6zWX61RwIqtMc3NaxX0G7ksW12/g
35ACqiEEd5WRDhAtVhj5Wp+WEDoR4AD3LWIaN7a/qjO3qb78l7Bujw3qXzGSq4lQ
hST6dTgMwn5LhJOyz+5dORVUK1UZSBuDxHeKRHgdoFi6yqGQ5bao5TpaDYOnGSbx
8KPrAFfXG1T6xRS8Ih5HXAPE5VJztLFPiVtCTTrETDP/o8EzvOZj5y/nJVZXXC3N
57g+QyJX9EdrRZvobef4LnNnoZyiqG+uQNugglqZqjiiLjl6AzYxI+ed0hU+cZR9
pz76Hr8=
=i2cV
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20240506' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmY4wZceHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIftQsH+wfIWymTdQMowfM6
# Ze/T8KODn+MqU5eg25VPSTojnmr7LFaCj2yK6zWX61RwIqtMc3NaxX0G7ksW12/g
# 35ACqiEEd5WRDhAtVhj5Wp+WEDoR4AD3LWIaN7a/qjO3qb78l7Bujw3qXzGSq4lQ
# hST6dTgMwn5LhJOyz+5dORVUK1UZSBuDxHeKRHgdoFi6yqGQ5bao5TpaDYOnGSbx
# 8KPrAFfXG1T6xRS8Ih5HXAPE5VJztLFPiVtCTTrETDP/o8EzvOZj5y/nJVZXXC3N
# 57g+QyJX9EdrRZvobef4LnNnoZyiqG+uQNugglqZqjiiLjl6AzYxI+ed0hU+cZR9
# pz76Hr8=
# =i2cV
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 04:40:07 AM PDT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
* tag 'qemu-sparc-20240506' of https://github.com/mcayland/qemu:
target/sparc: Split out do_ms16b
target/sparc: Fix FPMERGE
target/sparc: Fix FMULD8*X16
target/sparc: Fix FMUL8x16A{U,L}
target/sparc: Fix FMUL8x16
target/sparc: Fix FEXPAND
linux-user/sparc: Add more hwcap bits for sparc64
hw/sparc64: set iommu_platform=on for virtio devices attached to the sun4u machine
docs/about: Deprecate the old "UltraSparc" CPU names that contain a "+"
docs/system/target-sparc: Improve the Sparc documentation
target/sparc/cpu: Avoid spaces by default in the CPU names
target/sparc/cpu: Rename the CPU models with a "+" in their names
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Extract page-protection definitions to page-protection.h
- Rework in accel/tcg in preparation of extracting TCG fields from CPUState
- More uses of get_task_state() in user emulation
- Xen refactors in preparation for adding multiple map caches (Juergen & Edgar)
- MAINTAINERS updates (Aleksandar and Bin)
-----BEGIN PGP SIGNATURE-----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=3Qkg
-----END PGP SIGNATURE-----
Merge tag 'accel-20240506' of https://github.com/philmd/qemu into staging
Accelerator patches
- Extract page-protection definitions to page-protection.h
- Rework in accel/tcg in preparation of extracting TCG fields from CPUState
- More uses of get_task_state() in user emulation
- Xen refactors in preparation for adding multiple map caches (Juergen & Edgar)
- MAINTAINERS updates (Aleksandar and Bin)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmY40CAACgkQ4+MsLN6t
# wN5drxAA1oIsuUzpAJmlMIxZwlzbICiuexgn/HH9DwWNlrarKo7V1l4YB8jd9WOg
# IKuj7c39kJKsDEB8BXApYwcly+l7DYdnAAI8Z7a+eN+ffKNl/0XBaLjsGf58RNwY
# fb39/cXWI9ZxKxsHMSyjpiu68gOGvZ5JJqa30Fr+eOGuug9Fn/fOe1zC6l/dMagy
# Dnym72stpD+hcsN5sVwohTBIk+7g9og1O/ctRx6Q3ZCOPz4p0+JNf8VUu43/reaR
# 294yRK++JrSMhOVFRzP+FH1G25NxiOrVCFXZsUTYU+qPDtdiKtjH1keI/sk7rwZ7
# U573lesl7ewQFf1PvMdaVf0TrQyOe6kUGr9Mn2k8+KgjYRAjTAQk8V4Ric/+xXSU
# 0rd7Cz7lyQ8jm0DoOElROv+lTDQs4dvm3BopF3Bojo4xHLHd3SFhROVPG4tvGQ3H
# 72Q5UPR2Jr2QZKiImvPceUOg0z5XxoN6KRUkSEpMFOiTRkbwnrH59z/qPijUpe6v
# 8l5IlI9GjwkL7pcRensp1VC6e9KC7F5Od1J/2RLDw3UQllMQXqVw2bxD3CEtDRJL
# QSZoS4d1jUCW4iAYdqh/8+2cOIPiCJ4ai5u7lSdjrIJkRErm32FV/pQLZauoHlT5
# eTPUgzDoRXVgI1X1slTpVXlEEvRNbhZqSkYLkXr80MLn5hTafo0=
# =3Qkg
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 05:42:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'accel-20240506' of https://github.com/philmd/qemu: (28 commits)
MAINTAINERS: Update my email address
MAINTAINERS: Update Aleksandar Rikalo email
system: Pass RAM MemoryRegion and is_write in xen_map_cache()
xen: mapcache: Break out xen_map_cache_init_single()
xen: mapcache: Break out xen_invalidate_map_cache_single()
xen: mapcache: Refactor xen_invalidate_map_cache_entry_unlocked
xen: mapcache: Refactor xen_replace_cache_entry_unlocked
xen: mapcache: Break out xen_ram_addr_from_mapcache_single
xen: mapcache: Refactor xen_remap_bucket for multi-instance
xen: mapcache: Refactor xen_map_cache for multi-instance
xen: mapcache: Refactor lock functions for multi-instance
xen: let xen_ram_addr_from_mapcache() return -1 in case of not found entry
system: let qemu_map_ram_ptr() use qemu_ram_ptr_length()
user: Use get_task_state() helper
user: Declare get_task_state() once in 'accel/tcg/vcpu-state.h'
user: Forward declare TaskState type definition
accel/tcg: Move @plugin_mem_cbs from CPUState to CPUNegativeOffsetState
accel/tcg: Restrict cpu_plugin_mem_cbs_enabled() to TCG
accel/tcg: Restrict qemu_plugin_vcpu_exit_hook() to TCG plugins
accel/tcg: Update CPUNegativeOffsetState::can_do_io field documentation
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
=ZbNW
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386: Introduce SapphireRapids-v3 to add missing features
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
# x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
# PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
# 6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
# eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
# V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
# =ZbNW
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 May 2024 10:36:59 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
qga/commands-posix: fix typo in qmp_guest_set_user_password
migration: do not include coroutine_int.h
kvm: move target-dependent interrupt routing out of kvm-all.c
pci: remove some types from typedefs.h
tcg: remove CPU* types from typedefs.h
display: remove GraphicHwOps from typedefs.h
qapi/machine: remove types from typedefs.h
monitor: remove MonitorDef from typedefs.h
migration: remove PostcopyDiscardState from typedefs.h
lockable: remove QemuLockable from typedefs.h
intc: remove PICCommonState from typedefs.h
qemu-option: remove QemuOpt from typedefs.h
net: remove AnnounceTimer from typedefs.h
numa: remove types from typedefs.h
qdev-core: remove DeviceListener from typedefs.h
fw_cfg: remove useless declarations from typedefs.h
build: do not build virtio-vga-gl if virgl/opengl not available
bitmap: Use g_try_new0/g_new0/g_renew
target/i386: Introduce SapphireRapids-v3 to add missing features
docs: document new convention for Kconfig board symbols
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
This macro can be used to abbreviate PAGE_READ | PAGE_WRITE | PAGE_EXEC
for which PAGE_RWX is a better name and renaming it also shows it is
not related to TARGET_PAGE_BITS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240505121008.44A0D4E602D@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribinfo data structure is not used
Adjust the command-line arguments to the python scripts
Add hex_common.read_common_files for TCG/helper generation scripts
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240307032327.4799-10-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
This data structure is not used
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240307032327.4799-9-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-8-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-7-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Check that the value matches opcode_wregs
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-5-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Check that the value matches opcode_reginfo/opcode_wregs
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-4-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Check that the value matches opcode_reginfo
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-3-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Currently, we pass env to every generated helper. When the semantics of
the instruction only depend on the arguments, this is unnecessary and
adds extra overhead to the helper call.
We add the TCG_CALL_NO_RWG_SE flag to any non-HVX helpers that don't get
the ptr to env.
The A2_nop and SA1_setin1 instructions end up with no arguments. This
results in a "old-style function definition" error from the compiler, so
we write overrides for them.
With this change, the number of helpers with env argument is
idef-parser enabled: 329 total, 23 with env
idef-parser disabled: 1543 total, 550 with env
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240214042726.19290-4-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Rather than reading SP from the env, pass it explicitly
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240214042726.19290-3-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Rather than reading P0 from the env, pass it explicitly
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240214042726.19290-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Look for read-after-write instead of overlap of reads and writes
HVX instructions with helpers have pass-by-reference semantics, so
we check for overlaps of reads and writes within the same instruction.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240201103340.119081-4-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
We divide gen_analyze_funcs.py into 3 phases
Declare the operands
Analyze the register reads
Analyze the register writes
We also create special versions of ctx_log_*_read for new operands
Check that the operand is written before the read
This is a precursor to improving the analysis for short-circuiting
the packet semantics in a subsequent commit
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240201103340.119081-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The unit operation for fmul8x16 and friends is described in the
manual as "MS16b". Split that out for clarity. Improve rounding
with an unconditional addition of 0.5 as a fixed-point integer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-8-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This instruction has f32 inputs, which changes the decode
of the register numbers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-7-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Not only do these instructions have f32 inputs, they also do not
perform rounding. Since these are relatively simple, implement
them properly inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240502165528.244004-6-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
These instructions have f32 inputs, which changes the decode
of the register numbers. While we're fixing things, use a
common helper for both insns, extracting the 16-bit scalar
in tcg beforehand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-5-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This instruction has f32 as source1, which alters the
decoding of the register number, which means we've been
passing the wrong data for odd register numbers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-4-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is a 2-operand instruction, not 3-operand.
Worse, we took the source from the wrong operand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-3-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The output of "-cpu help" is currently rather confusing to the users:
It might not be fully clear which part of the output defines the CPU
names since the CPU names contain white spaces (which we later have to
convert into dashes internally). At best it's at least a nuisance since
the users might need to specify the CPU names with quoting on the command
line if they are not aware of the fact that the CPU names could be written
with dashes instead. So let's finally clean up this mess by using dashes
instead of white spaces for the CPU names, like we're doing it internally
later (and like we're doing it in most other targets of QEMU).
Note that it is still possible to pass the CPU names with spaces to the
"-cpu" option, since sparc_cpu_type_name() still translates those to "-".
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2141
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240419084812.504779-3-thuth@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Commit b447378e12 ("qom/object: Limit type names to alphanumerical ...")
cut down the amount of allowed characters for QOM types to a saner set.
The "+" character was meant to be included in this set, so we had to
add a hack there to still allow the legacy names of POWER and Sparc64
CPUs. However, instead of putting such a hack in the common QOM code,
there is a much better place to do this: The sparc_cpu_class_by_name()
function which is used to look up the names of all Sparc CPUs.
Thus let's finally get rid of the "+" in the Sparc CPU names, and provide
backward compatibility for the old names via some simple checks in the
sparc_cpu_class_by_name() function.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240419084812.504779-2-thuth@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240503072014.24751-10-philmd@linaro.org>
Prepare for pcrel by not modifying cpu_pc before use,
in the case of JSR.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240503072014.24751-9-philmd@linaro.org>
Richard Henderson explained on IRC:
bcond_internal() used to insist that both branch
destination and branch fallthrough are use_goto_tb;
if not, we'd use movcond to compute an indirect jump.
But it's perfectly fine for e.g. the branch fallthrough
to use_goto_tb, and the branch destination to use
an indirect branch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424234436.995410-4-richard.henderson@linaro.org>
[PMD: Split bigger patch, part 4/5]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240503072014.24751-7-philmd@linaro.org>
Trivial change to make next commits easier to understand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424234436.995410-4-richard.henderson@linaro.org>
[PMD: Split bigger patch, part 3/5]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240503072014.24751-6-philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240503072014.24751-3-philmd@linaro.org>
ALPHA_CPU has a dynamic object type assert, which is
unnecessary considering that these are all class hooks.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240503072014.24751-2-philmd@linaro.org>
To easily compare with the SH4 manual, rename:
REG(B11_8) -> Rn
REG(B7_4) -> Rm
t0 -> result
Mention how underflow is calculated.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240430163125.77430-5-philmd@linaro.org>
To easily compare with the SH4 manual, rename:
REG(B11_8) -> Rn
REG(B7_4) -> Rm
t0 -> result
Mention how overflow is calculated.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240430163125.77430-4-philmd@linaro.org>
The documentation says:
SUBV Rm, Rn Rn - Rm -> Rn, underflow -> T
The overflow / underflow can be calculated as:
T = ((Rn ^ Rm) & (Result ^ Rn)) >> 31
However we were using the incorrect:
T = ((Rn ^ Rm) & (Result ^ Rm)) >> 31
Fix by using the Rn register instead of Rm.
Add tests provided by Paul Cercueil.
Cc: qemu-stable@nongnu.org
Fixes: ad8d25a11f ("target-sh4: implement addv and subv using TCG")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2318
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240430163125.77430-3-philmd@linaro.org>
Add the missing features(ss, tsc-adjust, cldemote, movdiri, movdir64b) in
the SapphireRapids-v3 CPU model.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Message-ID: <20240424072912.43188-1-lei4.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
Continue with PowerPC/POWER.
No changes to generated config-devices.mak files, other than
adding CONFIG_PPC to the ppc64-softmmu target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
MIPS boards may only be available for big-endian or only for
little-endian emulators, add a symbol so that this can be described
with a "depends on" clause.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
Continue with i386.
No changes to generated config-devices.mak files, other than
adding CONFIG_I386 to the x86_64-softmmu target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target/ppc/kvm.c calls out to code in hw/ppc/spapr*.c; that code is
not present and fails to link if CONFIG_PSERIES is not enabled.
Adjust kvm.c to depend on CONFIG_PSERIES instead of TARGET_PPC64,
and compile out anything that requires cap_papr, because only
the pseries machine will call kvmppc_set_papr().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When mechanically moving the @dirty field to AccelCPUState
in commit 9ad49538c7, we neglected cpu->accel is still NULL
when we want to dereference it.
Fixes: 9ad49538c7 ("accel/whpx: Use accel-specific per-vcpu @dirty field")
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Suggested-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240429091918.27429-2-philmd@linaro.org>
When mechanically moving the @dirty field to AccelCPUState
in commit 79f1926b2d, we neglected cpu->accel is still NULL
when we want to dereference it.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Suggested-by: Volker Rümelin <vr_qemu@t-online.de>
Fixes: 79f1926b2d ("accel/nvmm: Use accel-specific per-vcpu @dirty field")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240429091918.27429-3-philmd@linaro.org>
KVM code might have to call functions on the PCIDevice that is
passed to kvm_arch_fixup_msi_route(). This fails in the case
where --without-default-devices is used and no board is
configured. While this is not really a useful configuration,
and therefore setting up stubs for CONFIG_PCI is overkill,
failing the build is impolite. Just include the PCI
subsystem if kvm_arch_fixup_msi_route() requires it, as
is the case for ARM and x86.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulated with QEMU, interrupts will never come in the following
loop. However, if the NOP instruction is uncommented, interrupts will
fire as normal.
loop:
cli
call do_sti
jmp loop
do_sti:
sti
# nop
ret
This behavior is different from that of a real processor. For example,
if KVM is enabled, interrupts will always fire regardless of whether the
NOP instruction is commented or not. Also, the Intel Software Developer
Manual states that after the STI instruction is executed, the interrupt
inhibit should end as soon as the next instruction (e.g., the RET
instruction if the NOP instruction is commented) is executed.
This problem is caused because the previous code may choose not to end
the TB even if the HF_INHIBIT_IRQ_MASK has just been reset (e.g., in the
case where the STI instruction is immediately followed by the RET
instruction), so that IRQs may not have a change to trigger. This commit
fixes the problem by always terminating the current TB to give IRQs a
chance to trigger when HF_INHIBIT_IRQ_MASK is reset.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Message-ID: <20240415064518.4951-4-lrh2000@pku.edu.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix a possible abort in the "edu" device
* Add missing qga stubs for stand-alone qga builds and re-enable qga-ssh-test
* Fix memory corruption caused by the stm32l4x5 uart device
* Update the s390x custom runner to Ubuntu 22.04
* Fix READ NATIVE MAX ADDRESS IDE commands to avoid a possible crash
* Shorten the runtime of Cirrus-CI jobs
-----BEGIN PGP SIGNATURE-----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=0OB7
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-04-30' of https://gitlab.com/thuth/qemu into staging
* Clean-ups for "errp" handling in s390x cpu_model code
* Fix a possible abort in the "edu" device
* Add missing qga stubs for stand-alone qga builds and re-enable qga-ssh-test
* Fix memory corruption caused by the stm32l4x5 uart device
* Update the s390x custom runner to Ubuntu 22.04
* Fix READ NATIVE MAX ADDRESS IDE commands to avoid a possible crash
* Shorten the runtime of Cirrus-CI jobs
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYwmaMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUCERAAss5PJMG8rI4i4X/3nW49JYTlPOpgm/YX
# /UWF+eHUlqaqDdE0s+Pdw4Ozo3hXQt/E/CkcyflUTzVpnZtpv9vkhNWyjOoPV31v
# GQyQEzGvxZXl2S595XefyAyaMTP5maBhUTlyZWJo385cQraa60Ot5d4Mibr2CobY
# gIBRxEGB/frJYpbHJPxd/FxJV120gtuWAdZwGGYYYjwMzf2IKu2veODB8CnUErlX
# WNUsIzjtAslfh8Ek2ZmPzD7uktCUeigkukqIrLC1oEU3wzbJHkISv1kXCKPW/Nf6
# ISjVa5TqGwkiiF8fw9aYKvWrnPJS7JkhXw7Gz+b39d846kUdNyDfgLcYJeNS3cZ2
# R1xgR9B6hX8ZmikMbGC+0/Sv15u2Yr+bFxJBTJzq6zdOAb9EJNQY1hW2w/Lbrg3X
# LjY+ltcVweoSILT6AE6vGDPCHfBzO+6FcptFvw7ePvRGOlwAPZ3tEB9G2LEbCYgg
# BjWNP4aRuSfbUebO4x4Todz65WN8aY1EIBXORU/wgUlF2+zajWiOI5JRDKjWz2qQ
# gAMeCbLplli5bYrChWtouRIXtb061cQloULddu/SRFcaJOlV3SCzx4JfN15pU90s
# jRMIhMESAEj4NSfclhxsOiYp3ywZTvlQsVA6MgPlu2i3HJakQnt5zbg59TesRn2d
# r5PfAk83UnA=
# =0OB7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Apr 2024 12:11:31 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-04-30' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/cirrus: Remove the netbsd and openbsd jobs
.gitlab-ci.d/cirrus.yml: Shorten the runtime of the macOS and FreeBSD jobs
tests/qtest/ide-test: Verify READ NATIVE MAX ADDRESS is not limited
hw/ide/core.c (cmd_read_native_max): Avoid limited device parameters
gitlab: remove stale s390x-all-linux-static conf hacks
gitlab: migrate the s390x custom machine to 22.04
build-environment: make some packages optional
hw/char/stm32l4x5_usart: Fix memory corruption by adding correct class_size
qga: Re-enable the qga-ssh-test when running without fuzzing
stubs: Add missing qga stubs
hw: misc: edu: use qemu_log_mask instead of hw_error
hw: misc: edu: rename local vars in edu_check_range
hw: misc: edu: fix 2 off-by-one errors
target/s390x/cpu_models_sysemu: Drop local @err in apply_cpu_model()
target/s390x/cpu_models: Make kvm_s390_apply_cpu_model() return boolean
target/s390x/cpu_models: Drop local @err in get_max_cpu_model()
target/s390x/cpu_models: Make kvm_s390_get_host_cpu_model() return boolean
target/s390x/cpu_model: Drop local @err in s390_realize_cpu_model()
target/s390x/cpu_model: Make check_compatibility() return boolean
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In previous versions of the Arm architecture, the frequency of the
generic timers as reported in CNTFRQ_EL0 could be any IMPDEF value,
and for QEMU we picked 62.5MHz, giving a timer tick period of 16ns.
In Armv8.6, the architecture standardized this frequency to 1GHz.
Because there is no ID register feature field that indicates whether
a CPU is v8.6 or that it ought to have this counter frequency, we
implement this by changing our default CNTFRQ value for all CPUs,
with exceptions for backwards compatibility:
* CPU types which we already implement will retain the old
default value. None of these are v8.6 CPUs, so this is
architecturally OK.
* CPUs used in versioned machine types with a version of 9.0
or earlier will retain the old default value.
The upshot is that the only CPU type that changes is 'max'; but any
new type we add in future (whether v8.6 or not) will also get the new
1GHz default.
It remains the case that the machine model can override the default
value via the 'cntfrq' QOM property (regardless of the CPU type).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-5-peter.maydell@linaro.org
The generic timer frequency is settable by board code via a QOM
property "cntfrq", but otherwise defaults to 62.5MHz. The way this
is done includes some complication resulting from how this was
originally a fixed value with no QOM property. Clean it up:
* always set cpu->gt_cntfrq_hz to some sensible value, whether
the CPU has the generic timer or not, and whether it's system
or user-only emulation
* this means we can always use gt_cntfrq_hz, and never need
the old GTIMER_SCALE define
* set the default value in exactly one place, in the realize fn
The aim here is to pave the way for handling the ARMv8.6 requirement
that the generic timer frequency is always 1GHz. We're going to do
that by having old CPU types keep their legacy-in-QEMU behaviour and
having the default for any new CPU types be a 1GHz rather han 62.5MHz
cntfrq, so we want the point where the default is decided to be in
one place, and in code, not in a DEFINE_PROP_UINT64() initializer.
This commit should have no behavioural changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240426122913.3427983-2-peter.maydell@linaro.org
FEAT_Spec_FPACC is a feature describing speculative behaviour in the
event of a PAC authontication failure when FEAT_FPACCOMBINE is
implemented. FEAT_Spec_FPACC means that the speculative use of
pointers processed by a PAC Authentication is not materially
different in terms of the impact on cached microarchitectural state
(caches, TLBs, etc) between passing and failing of the PAC
Authentication.
QEMU doesn't do speculative execution, so we can advertise
this feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-6-peter.maydell@linaro.org
Newer versions of the Arm ARM (e.g. rev K.a) now define fields for
ID_AA64MMFR3_EL1. Implement this register, so that we can set the
fields if we need to. There's no behaviour change here since we
don't currently set the register value to non-zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-5-peter.maydell@linaro.org
FEAT_ETS2 is a tighter set of guarantees about memory ordering
involving translation table walks than the old FEAT_ETS; FEAT_ETS has
been retired from the Arm ARM and the old ID_AA64MMFR1.ETS == 1
now gives no greater guarantees than ETS == 0.
FEAT_ETS2 requires:
* the virtual address of a load or store that appears in program
order after a DSB cannot be translated until after the DSB
completes (section B2.10.9)
* TLB maintenance operations that only affect translations without
execute permission are guaranteed complete after a DSB
(R_BLDZX)
* if a memory access RW2 is ordered-before memory access RW2,
then RW1 is also ordered-before any translation table walk
generated by RW2 that generates a Translation, Address size
or Access flag fault (R_NNFPF, I_CLGHP)
As with FEAT_ETS, QEMU is already compliant, because we do not
reorder translation table walk memory accesses relative to other
memory accesses, and we always guarantee to have finished TLB
maintenance as soon as the TLB op is done.
Update the documentation to list FEAT_ETS2 instead of the
no-longer-existent FEAT_ETS, and update the 'max' CPU ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-4-peter.maydell@linaro.org
FEAT_CSV2_3 adds a mechanism to identify if hardware cannot disclose
information about whether branch targets and branch history trained
in one hardware described context can control speculative execution
in a different hardware context.
There is no branch prediction in TCG, so we don't need to do anything
to be compliant with this. Upadte the '-cpu max' ID registers to
advertise the feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-3-peter.maydell@linaro.org
For cpus using PMSA, when the MPU is disabled, the default memory
type is Normal, Non-cachable. This means that it should not
have alignment restrictions enforced.
Cc: qemu-stable@nongnu.org
Fixes: 59754f85ed ("target/arm: Do memory type alignment check when translation disabled")
Reported-by: Clément Chigot <chigot@adacore.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-id: 20240422170722.117409-1-richard.henderson@linaro.org
[PMM: trivial comment, commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As it had never been used since the first commit a1477da3dd ("hvf: Add
Apple Silicon support").
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Message-id: 20240422092715.71973-1-zenghui.yu@linux.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use @errp to fetch error information directly and drop the local
variable @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-8-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
So make kvm_s390_apply_cpu_model() return boolean and check the
returned boolean in apply_cpu_model() instead of accessing @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-7-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use @errp to fetch error information directly and drop the local
variable @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-6-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
So make kvm_s390_get_host_cpu_model() return boolean and check the
returned boolean in get_max_cpu_model() instead of accessing @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-5-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use @errp to fetch error information directly and drop the local
variable @err.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-3-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
With returned boolean, there's no need to check @err.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-2-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit d424db2354 excluded some strerrorname_np() instances because they
break musl libc builds. Another instance happened to slip by via commit
d4ff3da8f4.
Remove it before it causes trouble again.
Fixes: d4ff3da8f4 (target/riscv/kvm: initialize 'vlenb' via get-reg-list)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 1590154ee4 ("target/loongarch: Fix qemu-system-loongarch64 assert failed with the option '-d int'")
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Printing a "PowerPC" in front of each CPU name is not helpful at all:
It is confusing for the users since they don't know whether they
have to specify these letters for the "-cpu" parameter, too, and
it also takes some precious space in the dense output of the CPU
entries. Let's simply remove this now and use two spaces at the
beginning of the lines for the indentation of the entries instead,
and add a "Available CPUs" in the very first line, like most other
target architectures are doing it for their CPU help output already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Printing an "s390x" in front of each CPU name is not helpful at all:
It is confusing for the users since they don't know whether they
have to specify these letters for the "-cpu" parameter, too, and
it also takes some precious space in the dense output of the CPU
entries. Let's simply remove this now!
While we're at it, use two spaces at the beginning of the lines for
the indentation of the entries, and add a "Available CPUs" in the
very first line, like most other target architectures are doing it
for their "-cpu help" output already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Printing an "x86" in front of each CPU name is not helpful at all:
It is confusing for the users since they don't know whether they
have to specify these letters for the "-cpu" parameter, too, and
it also takes some precious space in the dense output of the CPU
entries. Let's simply remove this now and use two spaces at the
beginning of the lines for the indentation of the entries instead,
like most other target architectures are doing it for their CPU help
output already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add init_cmline and set boot_info->a0, a1
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-5-gaosong@loongson.cn>
The CPUBreakpoint and CPUWatchpoint structures are declared
in "hw/core/cpu.h", which contains declarations related to
CPUState and CPUClass. Some source files only require the
BP/WP definitions and don't need to pull in all CPU* API.
In order to simplify, create a new "exec/breakpoint.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240418192525.97451-3-philmd@linaro.org>
HVF has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-4-philmd@linaro.org>
NVMM has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-3-philmd@linaro.org>
WHPX has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-2-philmd@linaro.org>
The XRSTOR instruction ends calling tlb_flush(), declared
in "exec/exec-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-13-philmd@linaro.org>
We have abi_ulong == uint32_t for the 32-bit ABI.
Use the generic type to avoid to depend on the
"exec/user/abitypes.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-14-philmd@linaro.org>
'abi_ptr' is a user specific type. The system emulation
equivalent is 'target_ulong'. Use it in ppc_ldl_code()
to emphasis this is not an user emulation function.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231211212003.21686-18-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/ files requires the following definitions:
- TARGET_LONG_BITS
- TARGET_PAGE_BITS
- TARGET_PHYS_ADDR_SPACE_BITS
- TCG_GUEST_DEFAULT_MO
The first 3 are defined in "cpu-param.h". The last one
in "cpu.h", with a bunch of definitions irrelevant for
TCG. By moving the TCG_GUEST_DEFAULT_MO definition to
"cpu-param.h", we can simplify various accel/tcg includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20231211212003.21686-4-philmd@linaro.org>
We only need the "exec/tswap.h" and "cpu-param.h" headers.
Only include "cpu.h" in the target gdbstub.c source files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-20-philmd@linaro.org>
Theses files call cpu_ldl_code() which is declared
in "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-5-philmd@linaro.org>
User-only objects might benefit from the "exec/target_page.h"
API, which allows to build some objects once for all targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-3-philmd@linaro.org>
'NEED_CPU_H' guard target-specific code; it is defined by meson
altogether with the 'CONFIG_TARGET' definition. Rename NEED_CPU_H
as COMPILING_PER_TARGET to clarify its meaning.
Mechanical change running:
$ sed -i s/NEED_CPU_H/COMPILING_PER_TARGET/g $(git grep -l NEED_CPU_H)
then manually add a /* COMPILING_PER_TARGET */ comment
after the '#endif' when the block is large.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240322161439.6448-4-philmd@linaro.org>
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
-----BEGIN PGP SIGNATURE-----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=WEsU
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYqMhMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uVlD/47U3zYP33y4+wJcRScC0QI
# jYd82jS7GhD5YP5QPrIEMaSbDwtYGi4Rez1taaHvZ2fWLg2gE973iixmTaM2mXCd
# xPEqMsRXkFrQnC89K5/v9uR04AvHxoM8J2mD2OKnUT0RVBs38WxCUMLETBsD18/q
# obs1RzDRhEs5BnwwPMm5HI1iQeVvDRe/39O3w3rZfA8DuqerrNOQWuJd43asHYjO
# Gc1QzCGhALlXDoqk11IzjhJ7es8WbJ5XGvrSNe9QLGNJwNsu9oi1Ez+5WK2Eht9r
# eRvGNFjH4kQY1YCShZjhWpdzU9KT0+80KLirMJFcI3vUztrYZ027/rMyKLHVOybw
# YAqgEUELwoGVzacpaJg73f77uknKoXrfTH25DfoLX0yFCB35JHOPcjU4Uq1z1pfV
# I80ZcJBDJ95mXPfyKLrO+0IyVBztLybufedK2aiH16waEGDpgsJv66FB2QRuQBYW
# O0i6/4DEUZmfSpOmr8ct+julz7wCWSjbvo6JFWxzzxvD0M5T3AFKXZI244g1SMdh
# LS8V7WVCVzVJ5mK8Ujp2fVaIIxiBzlXVZrQftWv5rhyDOiIIeP8pdekmPlI6p5HK
# 3/2efzSYNL2UCDZToIq24El/3md/7vHR6DBfBT1/pagxWUstqqLgkJO42jQtTG0E
# JY1cZ/EQY7cqXGrww8lhWA==
# =WEsU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:36:03 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm: (37 commits)
tests/qtest: Add tests for the STM32L4x5 USART
hw/arm: Add the USART to the stm32l4x5 SoC
hw/char/stm32l4x5_usart: Add options for serial parameters setting
hw/char/stm32l4x5_usart: Enable serial read and write
hw/char: Implement STM32L4x5 USART skeleton
reset: Add RESET_TYPE_SNAPSHOT_LOAD
docs/devel/reset: Update to new API for hold and exit phase methods
hw, target: Add ResetType argument to hold and exit phase methods
scripts/coccinelle: New script to add ResetType to hold and exit phases
allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset
hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr
linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
hw/dma: avoid apparent overflow in soc_dma_set_request
hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI
target/arm: Add FEAT_NMI to max
hw/intc/arm_gicv3: Report the VINMI interrupt
hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()
hw/intc/arm_gicv3: Implement NMI interrupt priority
hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()
hw/intc/arm_gicv3: Add NMI handling CPU interface registers
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the calls are elided when KVM is not available,
we can remove the stubs (which are never compiled).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240419090631.48055-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
Enable FEAT_NMI on the 'max' CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-24-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so the NMI exception trap entry
behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the
GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority)
come from the hcrx_el2.HCRX_VFNMI bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set or clear PSTATE.ALLINT on taking an exception to ELx according to the
SCTLR_ELx.SPINTMASK bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or
CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With
CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in
arm_phys_excp_target_el().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This only implements the external delivery method via the GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The
EL0 check is necessary to ALLINT, and the EL1 check is necessary when
imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the
unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in
ARMv8.8-A and ARM v9.3-A.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to
ELx, with or without superpriority is masked. As Richard suggested, place
ALLINT bit in PSTATE in env->pstate.
In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which
treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to
PSTATE regardless of whether this is an illegal exception return or not. So
handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit
path of the exception_return helper. With the change, exception entry and
return are automatically handled.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and
HCRX_VFNMI. When the feature is enabled, allow these bits to be written in
HCRX_EL2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move APIC related code split in cpu-sysemu.c and
monitor.c to cpu-apic.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240321154838.95771-4-philmd@linaro.org>
According to the m68k semihosting spec:
"The instruction used to trigger a semihosting request depends on the
m68k processor variant. On ColdFire, "halt" is used; on other processors
(which don't implement "halt"), "bkpt #0" may be used."
Add support for non-CodeFire processors by matching BKPT #0 instructions.
Signed-off-by: Keith Packard <keithp@keithp.com>
[rth: Use semihosting_test()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace EXCP_HALT_INSN by EXCP_SEMIHOSTING. Perform the pre-
and post-insn tests during translate, leaving only the actual
semihosting operation for the exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using d0 (the semihost function number), use d1 (the
provide exit status).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230802161914.395443-2-keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
The various Intel CPU manuals claim that SGDT and SIDT can write either 24-bits
or 32-bits depending upon the operand size, but this is incorrect. Not only do
the Intel CPU manuals give contradictory information between processor
revisions, but this information doesn't even match real-life behaviour.
In fact, tests on real hardware show that the CPU always writes 32-bits for SGDT
and SIDT, and this behaviour is required for at least OS/2 Warp and WFW 3.11 with
Win32s to function correctly. Remove the masking applied due to the operand size
for SGDT and SIDT so that the TCG behaviour matches the behaviour on real
hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198
--
MCA: Whilst I don't have a copy of OS/2 Warp handy, I've confirmed that this
patch fixes the issue in WFW 3.11 with Win32s. For more technical information I
highly recommend the excellent write-up at
https://www.os2museum.com/wp/sgdtsidt-fiction-and-reality/.
Message-ID: <20240419195147.434894-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the difference between warn_report_once() and
error_report_once() is the former has the "warning:" prefix, while the
latter does not have a similar level prefix.
At the meantime, considering that there is no error handling logic here,
and the purpose of error_report_once() is only to prompt the user with
an abnormal message, there is no need to use an error-level message here,
and instead we can just use a warning.
Therefore, downgrade the message in error_report_once() to warning, and
merge it into the previous warn_report_once().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240327103951.3853425-4-zhao1.liu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gustavo Romero