Previous behaviour:
Anisotropic filtering was continuing to run even with Nearest filtering.
On opengl it doesn't run on nearest filtering. The gui for both
renderers also greys out aniso when nearest is selected.
Anisotropic filtering being able to run on palette texture. This caused
to break the rendering on palette textures for games that use it.
PR behavior:
The PR corrects both of these behaviors, Aniso won't run on palette
textures as well as nearest filtering.
Test cases for observing the issues were used: Star Ocean 3, Fifa
Street.
Automatic, Force Disabled, Force Enabled.
Automatic - automatically determinate if a game needs the half screen
fix.
Force Disabled - fully disables the half bottom fix. It will help
Xenosaga games.
Force Enabled - fully enables the half bottom fix. Will help Lord of the
Rings Two Towers, Superman Shadows of Apokolips, Midnight Club 3.
Automatic, same as before, automatically enable based on height delta.
Force Disabled, fully disables the half bottom detection.
Force Enabled: Fully enables the half bottom detection.
Separate and group hack types in to Rendering and Upscaling hacks. This
should help users identify better what some hacks do and make it a
little bit easier to use.
Rename Automatic CRC Level label back to CRC Hack Level.
Rename Accurate Date label to DATE Accuracy.
Rename Accurate Blending label to Blending Accuracy.
Remove 10x and 12x upscaling options, we don't want to hit the maximum
texture size limit and cause issues so better play it safe and allow
only up until 8x upscaling.
Reword the tooltip to make it a bit more fitting with it's current
behavior.
Add all games in the list that have some sort of aggressive state.
Update anisotropic filtering, autoflush sw, sparse texture, gl blending tooltips.
Xenosaga handles the half bottom as an vertex offset instead of a buffer
offset which does the effect twice.
Half bottom won't trigger a cache miss that skip the draw because it is
still the normal buffer but with a vertices offset.
Issue #3147
Previous skip value 6 wasn't enough and caused some visual issues on the
ntsc version. Use value of 8 instead.
Issue reported by ozzie212121 on discord.
Effect is properly rendered with depth emulation, so far only Burnout
Revenge triggered the crc hack from my testing.
Triggering the draw is done when the player car crashes.
* spu2-x: Fix crash with an invalid output module.
This will default to SDLOut.
Fixes https://github.com/PCSX2/pcsx2/issues/3124
* spu2-x: Create non-empty defaults for OutputApi and SdlOutputApi.
[107/641] Building CXX object plugins/GSdx_legacy/CMakeFiles/GSdx-legacy-1.0.0.dir/stdafx.cpp.o
warning: unknown warning option '-Wno-class-memaccess'; did you mean '-Wno-class-varargs'? [-Wunknown-warning-option]
warning: unknown warning option '-Wno-packed-not-aligned'; did you mean '-Wno-over-aligned'? [-Wunknown-warning-option]
2 warnings generated.
Partially replace the Linux ini code so that it:
- works on both Windows and Linux
- is backwards compatible with older GSdx inis
- properly handles UTF-8 ini pathnames
Fix an issue with GSdx on Windows not being able to handle non-ASCII
ini pathnames.
* cdvd: Fix off-by-one end of file checks
* cdvd: Fix loading for games that attempt to read non-existent sectors
Some games will hang when attempting to read non-existent sectors.
Just do nothing when it occurs instead of erroring out.
* cdvdgigaherz: Fix loading for games that attempt to read non-existent sectors
Some games will hang when attempting to read non-existent sectors.
Just do nothing when it occurs instead of erroring out.
* cdvd: Don't write non-existent sectors to blockdump
Fixes eyes rendering in Jak games both ingame and in cutscenes.
Previous method yielded no eyes in Jak 2/3/X cutscenes.
- Generalized offset search logic with caching system (works for BW > 1
and any PSM, limited to PSMCT32 for now)
- CRC Flags mechanism for default behavior enabling in Jak games
Fixes eyes blinking in Jak games with tex in rt search
enabled.
- Target TEX0 in Source is Source TEX0 if the Source is
not build from Target, otherwise it is the Target TEX0,
allowing improved Source invalidation
Add XgKickHack gamefix for Dog of Bay., fixes corrupt textures. Issue
#3041
Add some crc ids. Big Mutha JP version(Bakusou Convoy Densetsu - Otoko
Hanamichi America Roman),
Jak X Public Beta v.1 US, Sly 3 EU Prototype.
Fixes the noise generator outputting a 4.8 kHz tone instead of white noise. The random number generator used in GetNoiseValues currently repeats every 10 samples, which is really really awful for a random number generator.
New code based on http://problemkaputt.de/psx-spx.htm#spunoisegenerator
Developed a new SW sprite render function, which is used to fix
Jak and Daxter colors in Jak games and to remove the old Jak games hack
which yielded wrong colors and clashed with TC search texture in RT function.
- Remove OO_JakGames hack for palette readback from framebuffer (slow,
clashes with texture in RT TC function, clashes with Target readback logic)
- Developed new method SwSpriteRender with CPU rendering logic
- Add OI_JakGames method using SwSpriteRender for CPU palette rendering (fast,
does not clash with texture in RT TC function, no readback required)
Bonus: fps also sees an improvement in Jak games 3-5 increase.
* Refactor build.sh. Restructure finding plugins. Remove legacy code. Add --clean-plugins option. Document --no-trans option.
Don't do setcap if dev9ghzdrk isn't being built. List dependencies if they are missing. Remove code related to zerospu2, and misc plugins we aren't building. Minor message changes.
It will allow to render the shadows properly.
Rendering pattern is:
Save RG channel with a kind of a TS (replaced by a copy in this hack),
compute shadow in RG,
save result in alpha with a TS,
Restore RG channel that we previously copied to render shadows.
Seems like Texture shuffle/depth is not handled properly in all cases so
revert the change until we fix it properly. Move it to gl level too.
Commit:
11cd6b56cd
With the sprite hack removed it was no longer possible to toggle this
hack on nvidia gpus, the toggle has been moved to Disable Safe Features.
It some issues caused by the hack in sotc, fatal frame and border offset
issues.
The adapter ID was needed to be passed before for a legacy DX9 hack which is no longer present, I figured it could cause a potential conflict when the adapter value stored at INI is outdated. (which is now a possibility after
lightning removed reference device)
The other alternative would be to just force set the INI value on dialog initialization to avoid unavailable values in the INI file, but that would be a rough for a person transitioning from debug build to release build using the reference device
option, so just removing this outdated variable for now, I rather doubt we'd be needing it in the future, in case we need adapter passing to subdialogs, the former suggestion needs to be implemented. Not implementing it right now since there's no need for it.
in vs 2019, the system xhash used by unordered_map uses Target in its template definition. pcsx2 #defines this in the r5900 and r3000 headers which leak cause a cryptic compilation error. A quick fix here is just to undef it in gamebase.h. A better fix would be to encapsulate the definition or use something more c++ to avoid the pre-processor. Add a comment to explain the _Target_ undef.
tap.h did not have string defined. I guess this was included transitively somewhere with an earlier set of system headers.
Biostools, the file is opened in text mode which causes the bios to be partially read. I'm not sure that's vs2019 specific but it's wrong in any case. Maybe the default mode parameter changed at some point. Maybe wxFile would be a better choice here rather than WxFFile because wxFile always open s in binary mode.
It is quite complex to handle rescaling on ComputeFixedTEX0
so this function is less stricter than GetSizeFixedTEX0,
therefore we remove the reduce optimization,
and we don't handle bilinear filtering which might create wrong interpolation at the border.
Fixes FFX upscaling issues on Bilinear filter during cutscenes.
comment
Remove some crc lookups for gamefix patches that share the same serial
and patch codes. It will allow game versions with different crc ids to
use the patches. Close#2654
Add JP version to automatic mipmapping.
Typical shuffle case is 1/2 height so other half is undesired
In dbz we split the depth buffer.
- Sample first half, write to `0x0`.
- Sample second half, write to `0x800`
- Finally, sample `0x0` though `0xffc`
Crash Twinsanity is a similar case.
A short summary how d3d option behaves compared to gl.
None d3d-> behaves the same
Basic d3d-> even less than 1/3 of Basic opengl.
Medium d3d -> less than 1/3 of Basic opengl.
High d3d -> 1/3 of Basic opengl.
Note: Medium and High options are mostly intended for debug use.
Add the remaining code and separate it in levels because dx sux.
Basic blending mode -> doesn't enable fbmask on texture shuffle and
triangle primitives.
Medium -> doesn't enable fbmask on triangle primitives.
High mode- > fully enables fbmask, note it's still not on par with
opengl because we miss sw blending for some games.
Also keep in mind that High Blending option on d3d11 is like 1/3 of
Basic Blending option on GL.
It works on games such as Fifa Street 1 and 2 (character and stage
rendering), mission impossible operation surma (shadow rendering).
It needs at least Basic level of blending enabled on d3d11.
Follow up from the previous commit which is bypassing the texture cache
when the frame buffer is sampled.
Crc hacks are no longer needed on opengl.
Note: it requires at least Basic blending support.
Proof of concept. It should provide a huge speedup when accurate
blending is enabled for tri-ace / Jak / R&C (shadow rendering).
See #2894
Need PR#2892
v2: Add const + comment to explain that code isn't ideal.
Single triangle draw can now hit the tex_is_fb path.
Primitive Overlap will return no overlap for single primitive (triangle).
Ratchet and Clank, Jak, tri-Ace games.
It should improve shadow rendering.
Idea by Gregory.
Depth and channel shuffle rendered correctly on all renderers.
Also add some missing crc ids for Tales of Abyss.
PS: I'm ninjaing 3000 builds on the buildbot 😄
Allow to open Advanced settings and hacks window even when hw hacks are
off, this should allow OpenGL advanced settings to be configured even
when hw hacks are off in the gui since the options are configurable
wihtout depending on hw hacks checkbox.
Hw hacks will be greyed out when the checkbox button is not enabled.
New behavior will only be present on opengl hw gui. Direct3d11 will remain the same.
Don't set DATE true when Accurate Date is off, DATE is true anyway so
no need to set it again.
Don't call full barrier for DATE 45 at the date selection, do it
at the shader call check. It's the same, plus we avoid extra checks.
Change the name to Accurate Blending so it fits more with Date option
next to it, get rid of low/high end recommended nametag for the list and
just use Recommended for Basic level, lot of users seem to be using high
for "high end pc" which they shouldn't.
This will allow to save hotkey option toggling to the ini which
should fix gui updating with hotkey toggles.
Note: Render hw/sw switch doesn't work.
Also update some options that didn't have hotkey nametag.
Use a fixed size instead. It will avoid DPI scaling issues.
Also adjust the Special Inputs buttons height position so that the
window height remains a reasonable size.
There's no need to have duplicate images that basically do the same
thing. Update the gui to reflect latest changes and use the same images
on both. It will reduce plugin size.
Remove old images and update VS project files.
Hide all ps1 emu options instead of disable. Some options still got
enabled when they shouldn't have so just hide everything. This way we
avoid adding extra code, plus the gui looks cleaner.
Disable ini read/write for Analog ps1 mode, the feature was accidentaly
enabled for pcsx2. By looking at the code it should only be enabled for
ps1 combatibility mode. Also hide the option for pcsx2 as well.
Move around some of the hacks and advanced options to reflect the recent
changes.
1. Allow hrd colclip to also run on the unsupported
cases which should be pretty rare.
2. Remove colclip from high sw blending.
3. Disable the hdr colclip shader which may not be
actually required to run.
Idea by Gregory
* Use GLExtension::Has in cold path
* Throw error at first error
* Remove aniso check, all hardware support it. Bonus add GL4.6 extension support
* Remove viewport array check. We replace the function pointer anyway
Allow to compile on distribution that still ship an older file
The file is only a patchup of the missing 4.3/4.4/4.5/4.6 define
v2: rename the file and add khronos copyright
There are 2 extensions GL_ARB_debug_output (promoted from amd extension)
and GL_KHR_debug (the core extension, promoted from GL_ARB_debug_output)
As we use the callback we could drop the manual query of errors.
And save us the load of the GL_ARB_debug_output extension function pointer.
I used glcorearb.h as input file
Code is limited to core gl + KHR/ARB extension
GL1.X must be handled manually (need only 3 functions)
I think the solution would be to migrate gl.h/glext.h to the
single glcorearb.h. However we might need to update the code to fetch
pointer accordingly
Note: we don't check the null ptr anymore on GSwnd. It isn't important
as we check the extension.
v2: update copyright
v3: update copyright space
v4: update copyright of script
fix copyright
Fixes an issue with the window size and Show/Hide special inputs button
resetting when lilypad was closed and reopened, this was because the
code was executed only when the button was actually clicked.
The values will be properly stored in cache along with the rest already
working properly buttons.
lightningterror