The vector is only ever queryied and it's contents aren't modified, so
there's no reason to take the vector by value. We can take a constant
reference to it to avoid unnecessary allocating.
In these cases, the given string is only ever compared against other
string, so std::string can be turned into a std::string_view to allow
non-allocating inputs.
Android doesn't report values for the inputs generated by FullAnalogInput so
there isn't a reason to add them as such. This also avoids a bug(for android)
where if there are three inputs(say 12, 11, and 121), and you generate a FullAnalogInput
with 12/11 then it will create another input with the name 121 which can cause conficts
with the real 121 input. This is probably not an issue on PC since most Axis inputs
are named and not numbered.
Previously, the Qt frontend would initialize the controller
interface on starting, resulting in the cursor position being
relative to the main window, instead of the render window.
Xlib supports many mouse buttons, though there are 9 standard buttons, and they aren't arranged like other mouse APIs. Using only 5 buttons was preventing the use of buttons besides left/right/middle click and the scroll wheel. Here's what all the standard buttons are:
1. left button
2. middle button (pressing the scroll wheel)
3. right button
4. turn scroll wheel up
5. turn scroll wheel down
6. push scroll wheel left
7. push scroll wheel right
8. 4th button (aka browser backward button)
9. 5th button (aka browser forward button)
The remaining button indices are non-standard and device-specific, and technically far more than 32 are supported, but this seems like a reasonable limit to avoid cluttering the list with tons of useless mouse buttons. What mouse has more than 32 buttons anyways?
Whenever udev_monitor_receive_device() returns a non-null pointer,
the device must be unref'd after use with udev_device_unref().
We previously missed some unref calls for non-evdev devices.
It's not guaranteed that the eventfd is smaller than the monitor fd,
because fds are not always monotonically allocated. To select()
correctly in all cases, use the max between the monitor fd and eventfd.
This lets Dolphin know if a configured GameCube Controller should actually
be treated as connected or not.
Talked to @JMC47 a bit about this last night. My use-case is that all of
my controllers are the same hardware (Xbox One controllers) so share the
same configuration (modulo device number). Treating them all as always
connected isn't a problem for most games, but in some (Smash Bros.) it
forces me to go find a keyboard/mouse and unconfigure any controllers
that I don't actually have connected. Hotplugging devices (works on macOS,
at least) + this patch remove my need to ever touch the Controller Config
dialog while in a game.
This patch makes the following changes:
- A new `BooleanSetting` in `GCPadEmu` called "Always Connected", which
defaults to false.
- `ControllerEmu` tracks whether the default device is connected on every
call to `UpdateReferences()`.
- `GCPadEmu.GetStatus()` now sets err bit to `PAD_ERR_NO_CONTROLLER` if
the default device isn't connected.
- `SIDevice_GCController` handles `PAD_ERR_NO_CONTROLLER` by imitating the
behaviour of `SIDevice_Null` (as far as I can tell, this is the only use
of the error bit from `GCPadStatus`).
I wanted to add an OSD message akin to the ones when Wiimotes get
connected/disconnected, but I haven't yet found where to put the logic.
Axis range was previously calculated as max + abs(min), which relies on the assumption that
min will not exceed 0. For (min, max) values like (0, 255) or (-128, 127), which I assume to
be the most common cases, the range is correctly calculated as 255. However, given (20,
235), the range is erroneously calculated as 255, leading to axis values being normalized
incorrectly.
SDL already handles this case correctly. After changing the range calculation to max - min,
the axis values received from the evdev backend are practically identical to the values
received from the SDL backend.
Ideally Common.h wouldn't be a header in the Common library, and instead be renamed to something else, like PlatformCompatibility.h or something, but even then, there's still some things in the header that don't really fall under that label
This moves the version strings out to their own version header that doesn't dump a bunch of other unrelated things into scope, like what Common.h was doing.
This also places them into the Common namespace, as opposed to letting them sit in the global namespace.
Better separation of concerns. Relegates `ControllerInterface` to
enumerating input controls, and the new `ControlReference` deals with
combining inputs and configuration expression parsing.
GetName() creates a new evdev device which calls tons of ioctls. But the
main culprit is close() which for input devices appears to be a slow
path in the kernel.
This commit reduces PopulateDevices() by 50% on my laptop, but ~730 ms
is still ridiculously slow for something that isn't needed right away.
The SDL backend crashes when you close a joystick after SDL_Quit has
been called. Some backends don't need to be shutdown and
re-initialized everytime, we can just ask to enumerate devices again.
Rewrite GetXInputGUIDS to use SetupAPI instead of WMI Queries. When
using a language pack where the system language and user/program
language differ, Windows starts taking a VERY long time (10+ seconds)
to complete Queries for Win32_PNPEntity objects (it's probably
translating every single string since it transfers every single one
from the WMI server into memory in the program).
Fixes Issue 9744.
There is no reason to prevent the user from closing the config dialog
if the device is not found. It's not very good UX…
Also fixes ExpressionParser to return NO_DEVICE if the device doesn't
exist instead of SUCCESS.
This adds hotplugging support to the evdev input backend. We use
libudev to monitor changes to input devices in a separate thread.
Removed devices are removed from the devices list, and new devices
are added to the list.
The effect is that controllers are usable immediately after plugging
them without having to manually refresh devices (if they were
configured to be used, of course).
Changes UpdateInput() to skip if we can't lock the mutex, instead of
potentially blocking the CPU thread and causing a short but noticeable
frame drop.
This adds RemoveDevice() to ControllerInterface, fixes ExpressionParser
and some other code to support device removals without crashing,
and adds an IsValid() method to Device, to prepare for hotplugging.
This adds RegisterHotplugCallback() to register a callback which will
be invoked by the input backends' hotplug threads when there is a new
device, so that Core (GCKeyboard, GCPad, Wiimote, Hotkey) can reload
the configuration without adding a dependency to Core from InputCommon.
This makes the device ID assigning code common to all backends, by
moving it to AddDevice() instead of copy-pasting or replicating
the logic in the backends.
Also, to prepare for hotplugging, instead of relying on a name usage
count, the new ID assigning system always starts from ID 0 and tries
to assign the first ID that is not used.
The values are expected to be in the 0.0-1.0 range (as indicated by the
comment), and other parts of Dolphin also expect it to be in that range
since the "full" axis has a -1.0 to 1.0 range. However, this is not
always the case and fvalue can end up being outside of the range. This
clamps fvalue to always be in the 0.0 and 1.0 range.
Small cleanup by using std::shared_ptr and getting rid of
ciface.Devices() which just returned the m_devices (which defeats the
point of making m_devices protected).
Incidentally, this should make the code safer when we have
different threads accessing devices in the future (for hotplug?).
A lot of code use Device references directly so there is
no easy way to remove FindDevice() and make those unique_ptrs.
Previously, the devices vector would be passed to all backends. They
would then manually push_back to it to add new devices. This was fine
but caused issues when trying to add synchronisation.
Instead, backends now call AddDevice() to fill m_devices so that it is
not accessible from the outside.
Disclaimer: I can't test if this works on xbox one controllers, i don't have one. But i have conformed that this UpdateMotors() is related to rumble for emulated wiimotes.
This partially reverts commit "XInput: Apply immediately as well" (1958a10b6f) from pr # https://github.com/dolphin-emu/dolphin/pull/1560
Hopefully this fixes the xbox one controller rumble issue:
https://bugs.dolphin-emu.org/issues/9071
And in theory it might reduce the used usb bandwidth, as it was originally intended before pr 1560.
@JMC47: Please do a good amount of testing, to see if this breaks rumble for wiimotes or gamecube controllers emulated with xinput devices.
Lets the user set the following in intervals of 10 between 10 and 100;
- Stick/Radius (default 100,000000)
- Triggers/Threshold (default 90,000000)
- Tilt/Modifier/Range (default 50,000000) + mapped Tilt/Modifier button
to the configurations for wiimotes & nunchuks
If there were two commands in the buffer at once, it would only run the
first because of an error in UpdateInput.
If you sent the command "SET C" it would segfault because of a logic
issue in ParseCommand.
Currently only works on unix, but can be extended to other systems. Can
also be extended to do wiimotes.
Searches the Pipes folder for readable named pipes and creates a dolphin
input device out of them. Send controller inputs to the game by writing
to the file. Commands are described in Pipes.h.
Previously, MacOpenFile only overrode anything on OS X; otherwise it was
just a useless method, which is presumably why it wasn't marked override
in the first place. Address this more sanely by wrapping it in #ifdef
__APPLE__.
Using SDL_INIT_JOYSTICK implies SDL_INIT_EVENTS which installs a signal
handler for SIGINT and SIGTERM. There will be a way to prevent this in
2.0.4 but for now we'll need to handle SDL_QUIT.
- Simplified the locking mechanism when controllers were updated
- Reloaded the config of the controls instead of re-initialising the control plugins
- Fixed controls being unresponsive after the Refresh button was pressed
- Disables the hotkeys while the controller config is open
My keyboard layout does not have Alt_R but ISO_Level3_Shift. As a
consequence any control expression containing Alt_R fails to evaluate
completely and is unusable. This modification replace the missing term
of the expression by a dummy expression which always evaluate to
0. This way, the keybinding can work even if some keys are not
available.
We can compile with haptic support, and then not initialize due to haptics not being available.
So if we are compiling with haptics, test initializing with haptics and if that fails attempt to initialize without haptics before bailing out.
I'm not sure when this nonsense of forcing locking the mutex when it's
already taken should have ever taken effect, but let's be thankful it
isn't now. That was a badly worded sentence.
This is good hygiene, and also happens to be required to build Dolphin
using Clang modules.
(Under this setup, each header file becomes a module, and each #include
is automatically translated to a module import. Recursive includes
still leak through (by default), but modules are compiled independently,
and can't depend on defines or types having previously been set up. The
main reason to retrofit it onto Dolphin is compilation performance - no
more textual includes whatsoever, rather than putting a few blessed
common headers into a PCH. Unfortunately, I found multiple Clang bugs
while trying to build Dolphin this way, so it's not ready yet, but I can
start with this prerequisite.)
Initialize now just takes the handle directly. Reinitialize is added because it is much more straightforward in comparison to doing the Shutdown-Initialize manually.
strictStrings is not supported by debug libraries, and indeed breaks the build.
Drop wbemidl.h (incompatible with strictStrings) dependency by using SDL-style search for XInput GUIDs.
Yes, this is a fancy new feature, but our Wayland support was
particularly bitrotten, and ideally this would be handled by a platform
layer like SDL. If not, we can always add this back in when GLInterface
has caught up. We might be able to even support wxWidgets and GL
together with subsurfaces!
It was broken by e15ec56bf0 because it wasn't deemed important. However chances are people will eventually start using Dolphin on that configuration, so we shouldn't frivolously drop compatibility without good reason.
We can't use RendererHasFocus for this purpose because of some issues
with exclusive fullscreen, and the new RendererHasFocus implementation
didn't work for non-Render to Main Window cases, since the renderer
window wasn't managed by wx.
Looking at the old code for the ButtonManager was a brainfsck. This fixes a ton of bugs I kept uncovering as I was moving along.
Fixes the gamepad configuration file being incorrect.
No longer treats touchscreen in a special way. Ends up as a regular device with a "Touchscreen" device name.
Was incorrectly converting a index from integer to ButtonType. Wouldn't work due to the addition of some unused(in JNI) enumerators in ButtonType.
Fixes an issue where a map had a key as an axis which was causing its binding to be overwritten for every axis that was used twice (eg main stick left and right);
Fixes Triggers not working at all.
Fixes DPad not working at all.
Fixes C-Stick only half working.
Removes touch screen specific nativelibrary types onTouchAxisEvent and onTouchEvent.
Adds a configuration version configuration option. Allows easy configuration overwriting if the options need to be changed during updating.
Supersedes github PR #291.
- remove unused variables
- reduce the scope where it makes sense
- correct limits (did you know that strcat()'s last parameter does not
include the \0 that is always added?)
- set some free()'d pointers to NULL
JosJuice