4176cc77e1
InputCommon/ControllerInterface: Make devices mutex recursive so RemoveDevice can be used within UpdateInput.
2020-02-17 15:58:06 -06:00
8343dadd58
InputCommon: Add types to ControllerEmu that represent raw controller inputs and calibration data to calculate normalized input values.
2020-02-17 15:57:43 -06:00
1e652d7d34
InputCommon: Add calibration functionality to IMUGyroscope.
2020-02-17 15:57:43 -06:00
82a3aa5ff6
InputCommon: Add "Dead Zone" setting to raw gyro inputs.
2020-02-17 15:57:43 -06:00
47877ecf2c
InputCommon: Clean up creation of inputs.
2020-02-09 19:08:26 -06:00
01d69ba81a
Merge pull request #8624 from jordan-woyak/setting-expression-input-gate
...
InputCommon: Only update setting expressions when the input gate is enabled.
2020-02-10 00:47:30 +00:00
53f2e275af
InputCommon: Only update setting expressions when the input gate is enabled.
2020-02-09 18:42:42 -06:00
db65b9a766
Merge pull request #8616 from jordan-woyak/threshold-cleanup
...
InputCommon: Eliminate some duplicated button threshold logic.
2020-02-10 00:05:10 +00:00
f07457b6cc
InputCommon: Eliminate some duplicated button threshold logic.
2020-02-09 10:37:18 -06:00
5ab846ad12
Merge pull request #8614 from jordan-woyak/xinput-battery
...
InputCommon/XInput: Expose battery as input and cleanups.
2020-02-09 09:29:00 -05:00
2e2540317e
Merge pull request #8417 from jordan-woyak/setting-expressions
...
InputCommon: Allow controller settings specified with input expresions.
2020-02-09 01:37:30 +00:00
4f47cccd9f
Cleanup: Use std::abs instead of abs.
2020-02-08 18:21:14 -06:00
0a1634bedf
InputCommon: Allow Wii remote extension to be set with an input expression.
2020-02-08 16:03:13 -06:00
e7400cafd2
InputCommon: XInput cleanups.
2020-02-08 15:51:02 -06:00
86e8745169
InputCommon: Expose XInput battery level as an input.
2020-02-08 15:03:56 -06:00
e8152b700f
InputCommon: Allow controller settings specified with input expresions.
2020-02-08 14:01:55 -06:00
0491831483
Merge pull request #8592 from phcoder/devid
...
ButtonManager: Fix handling of empty device id.
2020-02-02 16:52:12 +01:00
69ee15e5ef
Merge pull request #8478 from jordan-woyak/dsu-client-cleanup
...
ControllerInterface/DSUClient: Minor cleanup.
2020-02-01 11:29:29 +10:00
02c5d292fa
ButtonManager: Fix handling of empty device id.
...
Device id is "" on ChromeOS when using gamepad
2020-01-29 02:47:18 +01:00
b92f6480a0
InputCommon: Make "Cursor" inputs aware of the rendered aspect ratio.
2020-01-24 09:20:41 -06:00
a61dff67da
InputCommon: List IMUAccelerometer's Up/Down inputs first for consistency.
2020-01-18 13:56:11 -06:00
6106f780a7
ControllerInterface/DSUClient: Eliminate m_accl/m_gyro state by accessing the pad data directly like every other input.
2020-01-13 17:35:33 -06:00
eacbff76dd
Merge pull request #8474 from jordan-woyak/dsu-battery
...
ControllerInterface: Exposse DSU client battery level as an input.
2020-01-13 18:30:53 -05:00
e2d5c92c76
ControllerInterface: Remove and re-add device when combining nodes.
2020-01-13 16:50:58 -06:00
aabe8d2ccd
ControllerInterface: Don't consider the empty string a valid unique ID.
2020-01-13 16:50:58 -06:00
ac907ef977
ControllerInterface: Combine evdev devices with the same unique ID.
...
This works around Linux drivers for DS4 (Playstation 4) controllers splitting the device into three separate event nodes which makes configuration difficult.
To prevent collisions of input names in combined devices more descriptive names are now used when possible.
2020-01-13 16:50:56 -06:00
2b9fa0597a
ControllerInterface: Minor DSU client device cleanups.
2020-01-13 16:32:02 -06:00
f0534cabc6
ControllerInterface: Exposse DSU client battery level as an input.
2020-01-13 16:29:24 -06:00
a8c33f4ef6
Fix trailing whitespace
2020-01-07 12:52:05 +13:00
21528c3e72
Document the evdev "interesting" heuristic
...
Was checking over this old code, and saw a comment calling me out for a lack of documentation.
It might be half a decade late, but better late then never.
2020-01-07 12:46:24 +13:00
6e549bb668
InputConfig::LoadConfig(): Convert num[] to an array of std::string_view.
...
NOTE: The explicit std::string() conversions later are needed. Otherwise,
gcc-9.2.0 throws all sorts of errors because it can't find a matching
operator+() function.
2019-12-29 23:45:02 -05:00
6fcb1c6c46
Add an ARM64 target to Visual Studio projects
2019-12-28 19:20:41 +10:00
5c996dec89
DualShockUDPClient: downgrade spurious NOTICE_LOGs
2019-12-23 18:36:18 +01:00
dd23a1ee79
Update VS projects/solutions to VS2019
2019-11-30 13:42:52 +10:00
ef32a10d69
InputCommon: Decouple ButtonManager and Touchscreen from Android
...
Changes were also made for codestyle compliance.
2019-11-28 15:20:51 -05:00
155016531f
Merge pull request #8439 from JosJuice/android-native-motion-controls
...
Android: Native motion controls
2019-11-27 15:40:43 -08:00
ec895f544c
Merge pull request #8486 from lioncash/dualshock
...
InputCommon/DualShockUDPClient: Minor cleanup
2019-11-24 00:46:19 +01:00
334e2768f5
InputCommon/DualShockUDPClient: Use an alias for the clock type
...
Makes code slightly less verbose without exposing the whole chrono
header to the current source file.
2019-11-22 17:06:10 -05:00
db9e592765
InputCommon/DualShockUDPClient: Use deduction guides for lock_guard
...
With C++17, we can use template deduction guides provided by the
standard library. This allows the omission of the mutex type itself.
2019-11-22 17:06:10 -05:00
278d03f737
InputCommon/DualShockUDPClient: Make use of std::array where applicable
...
Provides the same semantics of a C array, but is much nicer to work
with.
Notably, it makes all cases of performing comparisons with said arrays
significantly less reading-involved.
2019-11-22 17:06:07 -05:00
a06da596e5
Merge pull request #8485 from lioncash/imu
...
InputCommon/IMU*: Remove unnecessary includes
2019-11-22 22:31:57 +01:00
af37d09b0f
Merge pull request #8484 from lioncash/input-func
...
InputCommon/FunctionExpression: Minor cleanup
2019-11-22 22:31:31 +01:00
67097b4574
InputCommon/DualShockUDPClient: Relocate settings to top of source file
...
This is a small namespace, so we can move it to the top of the file to
get it out of the way of everything else.
2019-11-22 15:56:29 -05:00
4488719a76
InputCommon/DualShockUDPClient: In-class initialize members where applicable
...
Deduplicates members within the constructor's initializer list.
2019-11-22 15:56:29 -05:00
544d6cbe52
InputCommon/DualShockUDPClient: Add missing header guard
...
Prevents potential inclusion issues from occurring.
2019-11-22 15:56:26 -05:00
91993b46d9
InputCommon/IMU*: Remove unnecessary includes
...
Trims out unnecessary includes to avoid unnecessary header dependencies.
This also resolves indirect inclusions of <optional> within
IMUAccelerometer.h and IMUGyroscope.h
2019-11-22 15:41:38 -05:00
814fd165af
InputCommon/FunctionExpression: Use Yoda conditions, we do not
...
The general convention in the codebase is to compare the non-constant
value/string with the constant value/string, not the other way around.
2019-11-22 15:36:18 -05:00
1f6077922b
InputCommon/FunctionExpression: Remove unnecessary 'else' in MakeFunctionExpression()
...
Given all conditional bodies only contain a return, the use of else here
isn't necessary.
This has the benefit of consistently vertically aligning the names.
2019-11-22 15:36:18 -05:00
10fea99d80
InputCommon/FunctionExpression: Make MakeFunctionExpression() take a std::string_view
...
There's nothing within this function that requires a copy of the string
to be made, so we can make use of a non-owning view
2019-11-22 15:36:18 -05:00
ddf8abf507
InputCommon/FunctionExpression: Remove unused LOOP_MAX_REPS constant
...
This isn't used anywhere in the translation unit, so we can remove it.
2019-11-22 15:36:18 -05:00
64bc6f53fd
InputCommon/FunctionExpression: Remove cyclical include
...
This header was including itself, which is likely not intended.
2019-11-22 15:36:18 -05:00
cb8fbe872e
InputCommon/FunctionExpression: Collapse namespaces
...
Since we target C++17, we can collapse the namespaces into a single
declaration specifier.
2019-11-22 15:36:14 -05:00
6586ecc7a8
InputCommon/FunctionExpression: include <algorithm>
...
std::min/std::max are used within this translation unit, so it needs to
be included to prevent potential compilation failures.
2019-11-22 14:41:13 -05:00
e8edc49bbe
InputCommon: Make use of fmt where applicable
...
Continues the migration over to fmt
2019-11-22 14:38:26 -05:00
c8b8a60033
Android: Let WiimoteEmu know whether we have accelerometer/gyroscope
2019-11-20 20:13:36 +01:00
b143df91be
Android: Native motion controls
2019-11-20 18:22:20 +01:00
fe39e1e6d8
Merge pull request #8440 from rlnilsen/motion-input-tweaks
...
Motion Input enhancements
2019-11-15 14:08:45 +01:00
913cb08066
Merge pull request #8456 from jordan-woyak/input-gate-race-fix
...
InputCommon: Make the "input gate" not racy.
2019-11-11 10:59:49 +10:00
0c57887839
evdev: fix bad integer division.
2019-11-10 10:10:37 -06:00
1180c231a6
InputCommon: Detect when evdev exposes acceleration/gyroscope data.
2019-11-09 13:34:29 -06:00
85ceb37ccd
InputCommon: Make the "input gate" not racey.
2019-11-06 16:31:02 -06:00
f7a50545e3
Motion Input: Add "enable" checkbox for motion controlled cursor.
2019-11-03 11:56:01 +01:00
d67a2304b0
Input: Add optional "enable" setting to the ControlGroup class.
...
The setting is exposed as a check box in the QGroupBox instance that visualises the ControlGroup instance.
The setting is saved under "[control group name]/Enabled", but only when it is "false". The default value is "true".
2019-11-03 11:55:52 +01:00
fd4bf5f0a2
Merge pull request #8438 from JosJuice/tilt-tooltip-string
...
Change Wii Remote tilt tooltip string based on translator feedback
2019-10-30 05:39:13 -04:00
1f3d1a9b7f
Merge pull request #8352 from rlnilsen/motion-controller-support-via-cemuhook-protocol
...
Support for motion controllers like the DualShock 4
2019-10-28 16:39:10 +01:00
f4da08eb13
Change Wii Remote tilt tooltip string based on translator feedback
2019-10-28 11:16:55 +01:00
da1f153b47
Rename all instances of "CemuhookUDPServer"/"UDPServer" to "DualShockUDPClient"/"DSUClient".
2019-10-27 16:05:22 +01:00
5ff79499a5
UDPServer: Add configuration UI.
...
Accessed through button "Alternate Input Sources" in the "Controller Settings" dialog.
2019-10-26 02:20:18 +02:00
4cb3baba5c
Add support for motion controllers via the CemuHook controller input protocol.
...
This is done by:
1) Implementing said protocol in a new controller input class CemuHookUDPServer.
2) Adding functionality in the WiimoteEmu class for pushing that motion input to the emulated Wiimote and MotionPlus.
3) Suitably modifying the UI for configuring an Emulated Wii Remote.
2019-10-26 02:19:53 +02:00
c6b4438c62
InputCommon: Change "EOF" to "end of expression" in user facing string
...
This is hopefully clearer, since we're not dealing with a file.
2019-10-25 23:49:20 +02:00
1fe44238b1
ExpressionParser: Add XOR operator.
2019-10-20 09:51:52 -05:00
8bc0a92f2c
Merge pull request #7663 from jordan-woyak/expression-parser-improve
...
Expression parser improvements
2019-10-17 17:35:30 -04:00
a21b7b1bdd
Merge pull request #8390 from jordan-woyak/wiimote-emu-tilt-fix
...
WiimoteEmu: Tilt fixes.
2019-10-16 16:14:42 -07:00
b120b08726
ControllerEmu: Clamp results of trigger/slider states to prevent integer overflow later on.
2019-10-15 15:35:07 -05:00
7295458c11
ExpressionParser: Make Lexer ctor explicit and move argument.
2019-10-12 12:28:19 -05:00
72302d9c42
ExpressionParser: Add support for /* */ style comments.
2019-10-12 11:41:02 -05:00
b4e2b3cae3
ControllerEmu: Don't clear expression variables on references update. Hotplug would make that problematic.
2019-10-11 19:42:49 -05:00
4d41bd64c8
ExpressionParser: Show error message with expected arguments.
2019-10-11 19:38:18 -05:00
b57178d246
ExpressionParser: Remove ! character from function syntax. Remove unused serialization functions.
2019-10-11 18:12:18 -05:00
7912dc57dd
ExpressionParser: Remove !while and add optional 2nd argument to !smooth.
2019-10-11 18:12:18 -05:00
ca7ce67450
ExpressionParser/DolphinQt: Added parse results to UI.
2019-10-11 18:12:18 -05:00
c8b2188e19
DolphinQT: Add syntax highlighting from tokenizer data.
2019-10-11 18:12:18 -05:00
5cb1248612
ExpressionParser: Clean up some redundant using-declarations and wrong comments.
2019-10-11 18:12:18 -05:00
fae8b15db1
ExpressionParser: Add !pulse function that evaluates to 1.0 for N seconds for each press.
2019-10-11 18:12:18 -05:00
b5b43f8342
ExpressionParser: Add relative input function.
2019-10-11 18:12:18 -05:00
08b291b0f9
ExpressionParser: Fix timer function with negative values.
2019-10-11 18:12:18 -05:00
18b5120441
ExpressionParser: Add !tap function which activates after X (defaults to 2) taps within Y seconds.
2019-10-11 18:12:17 -05:00
f2e499d587
ExpressionParser: Add !hold function that activates after input is held for N seconds.
2019-10-11 18:12:17 -05:00
9e536382c4
ExpressionParser: Add function to smooth inputs.
2019-10-11 18:12:17 -05:00
bbd6b1848f
ExpressionParser: Add deadzone function.
2019-10-11 18:12:17 -05:00
6a2096c419
ExpressionParser: Add optional 2nd argument to toggle function which clears state.
2019-10-11 18:12:17 -05:00
fd07ae8cec
ExpressionParser: Move FunctionExpression type definitions into another file.
2019-10-11 18:12:16 -05:00
d4f9b8c4ef
ExpressionParser: Allow unary functions to be used without parens around the argument. e.g. !`Up`
2019-10-11 17:31:09 -05:00
2a377e35ed
ExpressionParser: Make function names case sensitive.
2019-10-11 17:31:09 -05:00
2b0297489f
ExpressionParser: Rename some functions and return a syntax error on trailing tokens.
2019-10-11 17:31:09 -05:00
258832b1e8
ExpressionParser: Change function argument syntax to something more c++-like.
2019-10-11 17:31:09 -05:00
ccac3f1e49
ExpressionParser: Fix negative literals and support unary minus operator.
2019-10-11 17:31:07 -05:00
7cf903a209
ExpressionParser: Suppport N-ary functions. Arguments are read LISP style. N atoms are read after the function name. Added "if" function and made the "while" function more sensible with an arity of 2. Removed the ugly binary conditional operator.
2019-10-11 17:16:05 -05:00
4dd078568b
ExpressionParser: Replace the timer literal with a timer function that increases from 0.0 to 1.0 and resets after N seconds. e.g. (!timer 2.0) is a 2 second timer. Fixed parsing of unary expressions so things like (! ! 1.0) work.
2019-10-11 17:14:45 -05:00
785eb14432
ExpressionParser: Clean up string lexing and support numeric literals without tick delimiter: e.g. 0.75
2019-10-11 17:14:45 -05:00
fa75ab404f
ExpressionParser: operator precedence.
2019-10-11 17:14:45 -05:00
46c0ae7d1f
ExpressionParser: Add !while loop unary expression. Limited to 10000 reps to prevent infinite loops. Rhs is re-evaluated until it is < 0.5. Added comma operator, which behaves like it does in c++. Added subration operator.
2019-10-11 17:14:45 -05:00
2c89b60298
ExpressionParser: cleanup.
2019-10-11 17:14:45 -05:00
58efc93ed4
ExpressionParser: Conditional operator. A binary op that evals the rhs if lhs > 0.5 else 0.0.
2019-10-11 17:14:45 -05:00
718efce1dc
ExpressionParser: Add less-than and greater-than operators.
2019-10-11 17:14:45 -05:00
35e51ebbaa
ExpressionParser: Clear expression variables on UpdateReferences call. I don't know if this is most sensible.
2019-10-11 17:14:45 -05:00
e896835f86
ExpressionParser: Renamed ControlFinder to ControlEnvironment. Added support for variables and assignment operator. ControlExpression objects now reference a matching input and output so the two can me mixed in any expression. (you can set rumble directly from inputs)
2019-10-11 17:14:32 -05:00
1efcf861ea
ExpressionParser: Add mod operator, sin function, and timer "constant" which can be used for auto-fire and oscillators.
2019-10-11 17:13:58 -05:00
a8f3e9585f
ExpressionParser: Expand ! symbol to allow for named unary functions. Added !toggle function which toggles on/off with each activation of its inner expression.
2019-10-11 17:13:58 -05:00
bf63f85d73
ExpressionParser: Add multiplication and division operators. (division by zero evaluates as zero). Don't clamp result of addition operator. Clamping will be done later.
2019-10-11 17:13:58 -05:00
f3192ca06d
ExpressionParser: Add support for literals.
2019-10-11 17:13:58 -05:00
673f13b7ac
WiimoteEmu: Change default tilt angle to 85 degrees.
2019-10-06 09:56:41 -05:00
260cefd60b
WiimoteEmu: Expose maximum tilt acceleration.
2019-10-06 09:56:39 -05:00
428ae5a43d
Merge pull request #8172 from nokturnusmf/relative-input-hold
...
Added (held) key for relative input
2019-08-10 00:37:53 +10:00
48ca2c6f2e
Merge pull request #8233 from JosJuice/stringutil-string-view
...
StringUtil: Use std::string_view more
2019-08-09 23:39:01 +10:00
37d643c7d3
InputCommon/DInputJoystick: Correct force-feedback flag testing
...
Introduced in a995e2f5ba
2019-08-02 10:26:44 -04:00
a2a1e04fc9
StringUtil: Use std::string_view more
2019-07-23 14:49:12 +02:00
cf60a9a7f7
Use separate libusb contexts to avoid thread safety issues
...
Unfortunately, it appears that using libusb's synchronous transfer API
from several threads causes nasty race conditions in event handling and
can lead to deadlocks, despite the fact that libusb's synchronous API
is documented to be perfectly fine to use from several threads (only
the manual polling functionality is supposed to require special
precautions).
Since usbdk was the only real reason for using a single libusb context
and since usbdk (currently) has so many issues with Dolphin, I think
dropping support for it in order to fix other backends is acceptable.
2019-06-26 17:55:51 +02:00
ec60027f56
InputCommon: Use nested namespace specifiers where applicable
2019-06-17 16:51:41 -04:00
c62570c527
Added key for relative input
2019-06-10 13:23:16 +01:00
bed2d66bed
Merge pull request #8117 from weihuoya/threaded_env
...
android: get java env from thread local storage
2019-06-08 20:42:15 +10:00
c0c0e412e0
Core/ConfigManager: Use forward declarations where applicable
...
Avoids dragging in IniFile, EXI device and SI device headers in this header which is
quite widely used throughout the codebase.
This also uncovered a few cases where indirect inclusions were being
relied upon, which this also fixes.
2019-06-07 19:54:39 -04:00
24f5acf9a5
InputCommon/CMakeLists: Specify headers in target sources
2019-05-31 06:54:25 -04:00
00ecfb3c59
Merge pull request #8138 from lioncash/input-string
...
ControllerInterface/Device: Minor cleanup
2019-05-30 14:33:53 +02:00
0263435050
ControllerInterface/Device: Make DetectInput() a const member function
...
This doesn't actually modify object instance state, so it can be made
const.
2019-05-29 19:23:54 -04:00
27346fee8a
ControllerInterface/Device: Take vector by const reference in DetectInput()
...
The vector is only ever queryied and it's contents aren't modified, so
there's no reason to take the vector by value. We can take a constant
reference to it to avoid unnecessary allocating.
2019-05-29 19:12:21 -04:00
246e2a77ce
ControllerInterface/Device: std::move strings in constructor where applicable
...
Allows callers to move std::string values into the constructor,
potentially avoiding copies.
2019-05-29 18:46:49 -04:00
1355b43fd2
ControllerInterface/Device: Use std::string_view where applicable
...
In these cases, the given string is only ever compared against other
string, so std::string can be turned into a std::string_view to allow
non-allocating inputs.
2019-05-29 18:42:24 -04:00
2c3c8bbb90
GCAdapter: Update Android-specific source
...
Fix the Android version of GCAdapter.cpp so it matches the new definitions in GCAdapter.h.
2019-05-29 18:28:24 +02:00
9e7d4d2abb
GCAdapter: Handle dynamic status updates for non-hotplug libusb
...
Detect when the setup function found no adapter, or found one but could
not connect to it, and report the new status in that case.
2019-05-29 18:28:24 +02:00
2ac1ca133f
GCPadWiiUConfigDialog: Update the adapter state dynamically
...
Update the GC adapter config GUI if the adapter is plugged or unplugged.
2019-05-29 18:28:24 +02:00
b08e2ec959
GCAdapter: Report libusb open errors to the user
...
If opening the adapter fails, report the libusb error message in the GUI
instead of “No Adapter Detected”.
The error condition is removed when the adapter is unplugged.
2019-05-29 18:28:24 +02:00
0165e5e703
GCAdapter: Close libusb handle if an open error occurs
...
The handle was previously kept open, which was causing future adapter
plug/unplug events to be ignored.
2019-05-29 18:28:24 +02:00
0dec8feadb
android: thread local env
2019-05-29 20:22:26 +08:00
256c9375c9
Move libusb utilities to LibusbUtils
...
* Simplifies libusb context usage and allows us to set options for
all contexts easily. Notably, this lets us enable usbdk support
in libusb, which is now opt-in in the latest version.
* Moves the libusb config descriptor wrapper class to LibusbUtils too
since that could easily be reused.
* Moves device listing to LibusbUtils too and add a lock around it
as some libusb backends are not thread safe.
* Consequences: only a single context and a single event handling
thread is used now, which is more efficient.
2019-05-27 20:09:55 +02:00
e2c769a9c5
Merge pull request #7992 from artemist/centering
...
ControllerEmu: Add support for setting the center of a ReshapableInput
2019-05-20 18:29:31 +02:00
49e46c8aff
ControllerEmu: Add support for setting the center of a ReshapableInput
...
This is useful in far out-of-calibration controllers, such as the
Switch Pro controller. This also adds support for configuring the center
in the Mapping widget.
2019-05-18 14:45:16 +00:00
ec734065db
Merge pull request #8087 from spycrab/cmake_win2019
...
Support CMake on Windows
2019-05-14 21:07:26 +02:00
374585f128
WiimoteEmu/DolphinQt: Rename "IR" to "Point" and eliminate redundant Forward/Backward mappings.
2019-05-08 20:27:41 -05:00
12a26453e9
InputCommon/ControlGroup.h: Add missing include
2019-05-08 21:03:11 +02:00
7eaece8814
InputCommon/Device.cpp: Add missing include
2019-05-08 21:02:26 +02:00
98d808ab71
InputCommon/DInput.h: Add missing include
2019-05-08 21:01:46 +02:00
ff972e3673
Reformat repo to clang-format 7.0 rules
2019-05-06 18:48:04 +00:00
ab9ece9bca
Replace MathUtil::Clamp with std::clamp
2019-05-04 23:12:17 +02:00
99f537d499
WiimoteEmu/DolphinQt: Better extension display names.
2019-05-01 17:25:48 -05:00
57a23cc4a0
InputCommon: Remove unused "sign" macro.
2019-04-29 18:28:56 -05:00
9f0dc402f4
InputCommon: Make sure setting values are initialized in case they are used before config load.
2019-04-27 07:01:24 -05:00
ba1b335118
WiimoteEmu: Improve emulated swing.
2019-04-23 19:02:41 -05:00
4374600367
WiimoteEmu: Implement MotionPlus parameter y0 and other cleanups.
2019-04-23 18:38:00 -05:00
8c1310d1d1
ControllerInterface/DInput: Optimize cursor position updating.
2019-04-20 09:25:11 -05:00
80d21b8ffb
Merge pull request #8002 from JMC47/CursorSlowdown
...
Slow down relative input cursor
2019-04-15 20:43:31 -04:00
f3aaf5deaa
Reduce Relative Input Cursor Speed Dramatically
...
This makes it about 1/4th the speed which may be a bit slow, but should
work for most controllers.
2019-04-15 17:23:17 -04:00
1cedbd5b82
Merge pull request #7923 from jordan-woyak/full-surface-rename
...
ControllerInterface: Rename full surface analog inputs.
2019-04-13 17:43:29 -04:00
be897b41a7
ControllerInterface: Rename full surface analog inputs to be more visually dissimilar from their underlying inputs. e.g. "Full Axis X+".
2019-04-13 08:45:19 -05:00
c89ddf8cba
WiimoteEmu: Allow shake frequency and intensity to be configured. Other minor cleanups.
2019-04-12 16:50:59 -05:00
5efb717873
InputCommon: Clean up how numeric settings are handled. Add units of measure to UI. Eliminate hidden magic values of the IR cursor.
2019-04-07 09:32:49 -05:00
75e74315e6
Merge pull request #7689 from jordan-woyak/sdl-improve
...
ControllerInterface: SDL cleanups/fixes
2019-04-06 14:53:51 -04:00
2b6d718636
InputCommon: Fix Win32 init race.
2019-03-31 07:46:58 -05:00
735a705e4d
Merge pull request #7776 from jordan-woyak/wm_devicechange
...
Add hotplug support to DInput and XInput controller backends
2019-03-30 18:41:46 -04:00
eadbdd6bc3
ControllerInterface/Win32: Prevent devcies from losing their "id" on a hotplug event.
2019-03-29 09:04:16 -05:00
d26c1ce24d
Add hotplug support to DInput and XInput controller backends
2019-03-29 08:01:40 -05:00
92ca6e124e
Add ControllerInterface::Win32 to wrap XInput and DInput
2019-03-29 08:01:39 -05:00
a015851b02
HW/SI: GCAdapter calibration fix.
2019-03-29 06:15:58 -05:00
c89139d75d
Merge pull request #7903 from spycrab/imgui_np_chat
...
Add imgui-based Netplay Chat
2019-03-23 21:11:33 +01:00
672b582bec
Merge pull request #7918 from spycrab/iokit_refactor
...
InputCommon/OSX: Refactor IOKit controller interface
2019-03-22 21:18:27 +01:00
80fd01c3c3
InputCommon/OSX: Refactor IOKit controller interface
2019-03-22 14:04:30 +01:00
0a1aacb5d0
Merge pull request #7906 from jordan-woyak/leak-fix
...
DolphinQt/InputCommon: Fix a few memory leaks.
2019-03-21 23:26:54 +00:00
61350b3d98
Core/Host: Allow frontends to block inputs
2019-03-21 13:16:21 +01:00
b53636827b
ControllerInterface: Unbreak DirectInput POV Hats having bad values on init.
2019-03-19 16:05:49 -05:00
725d34b2f0
DolphinQt/InputCommon: Fix a few memory leaks.
2019-03-17 18:31:41 -05:00
0bdfa19650
ControllerInterface: SDL: Replace unclear bool parameter with enum class.
2019-03-17 08:53:53 -05:00
4fb68c530b
ControllerInterface: SDL cleanup and FF effect fixes.
2019-03-17 08:53:13 -05:00
011ecd92e8
Merge pull request #7829 from jordan-woyak/detect-input-improve
...
ControllerInterface/DolphinQt: Improve input detection.
2019-03-13 19:00:24 -04:00
a865cc0bf6
Merge pull request #7806 from jordan-woyak/wiimote-emu-swing-improve
...
WiimoteEmu: Reimplement tilt/swing/camera/orientation data using matrix math.
2019-03-05 23:37:00 +00:00
c389d68186
ControllerInterface/DolphinQt: Make mapping "all devices" way less hacky.
2019-03-03 18:39:02 -06:00
48b69ca018
ControllerInterface: Input detection improvements.
2019-03-03 18:36:16 -06:00
4db4840d7c
WiimoteEmu: Reimplement tilt/swing/camera/orientation data using matrix math.
2019-03-03 12:43:25 -06:00
ecb67cf815
ControllerEmu: Deadzone math fix.
2019-03-01 17:40:10 -06:00
131f4931fb
Merge pull request #7792 from jordan-woyak/auto-calibration
...
DolphinQt/ControllerEmu: Add stick calibration "wizard".
2019-02-13 02:13:27 +00:00
8d59d1bb11
Merge pull request #7798 from ShFil119/impr/empty
...
Use empty instead of size
2019-02-13 01:59:43 +00:00
49fe9f5db1
Use empty instead of size
2019-02-13 00:03:49 +01:00
0064f70c8a
DolphinQt/ControllerEmu: Replace Input Radius/Shape settings with an input calibration "wizard".
2019-02-10 07:55:47 -06:00
e9130734af
Merge pull request #7688 from jordan-woyak/evdev-improve
...
ControllerInterface: evdev: Cleanups and effect processing fixes.
2019-02-03 10:25:23 -08:00
9c1a8891e5
WiimoteEmu: Code cleanups.
2019-02-02 19:40:31 -06:00
0d1fbe7bbc
WiimoteEmu: Major renaming and cleanup.
2019-02-02 19:40:31 -06:00
3bc4968c11
ControllerEmu: Round input floats instead of casting to prevent almost-neutral values from being rounded down.
2019-02-02 15:12:07 -06:00
4979220cf0
Android: Optimize rumble call
...
Moved rumble call to IDCache since GetMethodID is expensive
2019-01-26 09:38:35 -05:00
d0b42286cf
Load custom game IR values if they are not set
...
This is mostly for android so that a user can use the touchscreen to
accurately emulate pointer movements
2019-01-23 17:16:32 -05:00
47d6406fd4
Android: Add touch to move pointer in overlay
2019-01-19 23:21:33 -05:00
6cc8775510
ControllerInterface: evdev: Replace unclear bool parameter with enum class.
2019-01-17 12:10:50 -06:00
52aa39991c
ControllerInterface: evdev: Cleanup rumble effect processing so effects aren't removed and re-uploaded with every SetState() call. Split the "LeftRight" output into separate "Strong" and "Weak" outputs. Other minor cleanups.
2019-01-17 12:10:50 -06:00
e19ee2ad4f
Merge pull request #7664 from jordan-woyak/kill-button-threshold
...
ControllerEmu: Killed the button group threshold setting.
2019-01-16 21:33:05 +01:00
a8bc6f9899
Merge pull request #7693 from jordan-woyak/hotplug-callback-fix
...
ControllerInterface: Hotplug callback fixes.
2019-01-16 21:00:48 +01:00
b2de98cad1
Merge pull request #7680 from jordan-woyak/dinput-axis-range
...
DirectInput: Use more than 8 bits of precision on axis inputs.
2019-01-16 18:52:11 +01:00
fb6fae2b2b
Flatten GCAdapter function
...
Make CheckDeviceAccess() more flat by inverting checks, reducing
indentation and removing dead code.
2019-01-16 14:20:00 +01:00
b425f86121
ControllerInterface: Allow hotplug callbacks to be unregistered and don't reload the entire config from the ini file on hotplug, just update the control references. This should fix a crash on shutdown on Android.
2019-01-10 18:32:16 -06:00
012338288e
Merge pull request #7662 from jordan-woyak/mapping-indicators-make-pretty
...
ControllerEmu: Make mapping indicators pretty
2019-01-10 19:04:27 -05:00
d3e1d2ea00
Merge pull request #7666 from jordan-woyak/input-shutdown-fix
...
ControllerInterface: Shutdown order and race condition fix.
2019-01-08 14:39:47 +01:00
02c649ba20
Android: Change all analoginputs to just inputs
...
Android doesn't report values for the inputs generated by FullAnalogInput so
there isn't a reason to add them as such. This also avoids a bug(for android)
where if there are three inputs(say 12, 11, and 121), and you generate a FullAnalogInput
with 12/11 then it will create another input with the name 121 which can cause conficts
with the real 121 input. This is probably not an issue on PC since most Axis inputs
are named and not numbered.
2019-01-07 21:52:39 -05:00
a7c45fb49e
DirectInput: Use more than 8 bits of precision on axis inputs.
2019-01-06 08:14:37 -06:00
0ca9accd8b
Merge pull request #7640 from jordan-woyak/input-fixes
...
ControllerInterface: Output/Rumble fixes
2019-01-05 17:16:35 -05:00
a995e2f5ba
ControllerInterface: Set DInput FF effect parameters sanely. This fixes a crash with periodic effects and my GCPad adapter (probably a divide by zero behind the scenes).
2019-01-05 13:00:04 -06:00
25d43ffd98
ControllerInterface: Shutdown order and race condition fix.
2019-01-02 08:19:42 -06:00
df43fd9472
ControllerEmu: Killed the Buttons group threshold setting.
2018-12-31 08:35:31 -06:00
7efa96eda9
ControllerEmu: code cleanup.
2018-12-30 10:52:45 -06:00
7a00f55cfa
ControllerEmu::Cursor: Add input radius/shape settings to IR Cursor mappings to allow use of round inputs in absolute mode. Make relative input option obey the center/width/height settings. Make the mapping indicator pretty and actually show what the relative/center/w/h settings are doing.
2018-12-30 09:10:32 -06:00
247fa8c628
WiimoteEmu: Remove redundant threshold setting from hotkeys button group.
2018-12-29 16:19:28 -06:00
c3dc3c106c
ControllerEmu: Reorganize stick reshaping code and use it for emu wiimote tilt as well. Also make the tilt mapping indicator pretty.
2018-12-29 16:06:03 -06:00
6a6195f53c
ControllerEmu: Implement dead zone setting for triggers.
2018-12-29 13:56:35 -06:00
c614f5f534
ControllerEmu: Allow analog stick input radius greater than one. Useful for rounded-square inputs of xbox controllers.
2018-12-27 19:16:37 -06:00
da9bcf83ef
InputCommon: Simplified StickGate interface and moved class into its own file. Changed default input radius to perform no resizing. Tweaked the indicator colors a bit to improve visibility. Cleaned up some math and code.
2018-12-27 18:31:46 -06:00
ceb28a2302
Add ability to reshape analog sticks from square/circle to octagon and make the analog stick mapping indicator pretty.
2018-12-27 18:31:46 -06:00
0f19c4a40f
ControllerInterface: DInput: Update force feedback effects in a thread. This should prevent slowdowns experienced by a handful of users.
2018-12-24 19:40:58 -06:00
d5df56c677
ControllerInterface: Make CoalesceExpression not set the inactive child's value (rumble) to 0. This caused rumble to not enable when a control expression was both a valid "bareword" and "complex" expression.
2018-12-22 11:17:05 -06:00
52828901ef
Core: Switch controller interface to render widget on booting
...
Previously, the Qt frontend would initialize the controller
interface on starting, resulting in the cursor position being
relative to the main window, instead of the render window.
2018-10-29 11:46:06 +10:00
a7f334dc2a
ControllerInterface: Don't crash on non-X11 QPA
2018-10-29 11:46:06 +10:00
97cc9894e4
Update to Visual Studio's default Windows SDK
2018-10-20 00:53:08 +01:00
79051a28c4
evdev: simplify code
...
No need to check write access if we call open() right after which checks
that anyway. Also only get the device name once.
2018-10-08 19:51:29 +01:00
85961f996e
Merge pull request #7400 from zackhow/phone-rumble
...
Android: Add rumble for phone
2018-09-21 17:05:46 +02:00
e90bd035cb
Merge pull request #7262 from lioncash/force
...
ControlGroup: Return state data via GetState() by value where applicable
2018-09-16 16:04:21 +02:00
a4f950ee86
Fix a string not getting translated
2018-09-08 15:16:39 +02:00
126ff8dc5f
Android: Add rumble for phone
...
This currently only supports using the internal vibrate on a phone for rumble.
2018-09-07 08:54:03 -04:00
311d0442de
InputCommon/XInput2: Increase mouse buttons to 32
...
Xlib supports many mouse buttons, though there are 9 standard buttons, and they aren't arranged like other mouse APIs. Using only 5 buttons was preventing the use of buttons besides left/right/middle click and the scroll wheel. Here's what all the standard buttons are:
1. left button
2. middle button (pressing the scroll wheel)
3. right button
4. turn scroll wheel up
5. turn scroll wheel down
6. push scroll wheel left
7. push scroll wheel right
8. 4th button (aka browser backward button)
9. 5th button (aka browser forward button)
The remaining button indices are non-standard and device-specific, and technically far more than 32 are supported, but this seems like a reasonable limit to avoid cluttering the list with tons of useless mouse buttons. What mouse has more than 32 buttons anyways?
2018-08-27 08:47:32 -04:00
cfe7549091
ControlGroup/Triggers: Return state data by value
...
Makes it less error-prone to get state data from analog sticks (no need
to pass any locals), and also allows direct assignment, letting the
retrieved data be const.
2018-07-13 13:20:35 -04:00
97ba02df27
ControlGroup/Tilt: Return state data by value
...
Makes it less error-prone to get state data from tilt controls (no need
to pass any pointers to locals), and also allows direct assignment,
letting the retrieved data be const.
2018-07-13 13:20:35 -04:00
918d448b5b
ControlGroup/Slider: Return state data by value
...
Makes it less error-prone to get state data from sliders (no need
to pass any locals), and also allows direct assignment, letting the
retrieved data be const.
2018-07-13 13:20:35 -04:00
4c30b9e14d
ControlGroup/Force: Return state data by value
...
Ensures that an array of sufficient size is always used and doesn't put
the responsibility on the caller. It also allows for direct assignment.
2018-07-13 13:20:35 -04:00
ef1240b0c7
ControlGroup/Cursor: Return state data by value
...
Makes it less error-prone to get state data from cursors (no need
to pass any pointers to locals), and also allows direct assignment,
letting the retrieved data be const.
2018-07-13 13:20:35 -04:00
d05f490caa
ControlGroup/AnalogStick: Return state data by value
...
Makes it less error-prone to get state data from analog sticks (no need
to pass any locals), and also allows direct assignment, letting the
retrieved data be const.
2018-07-13 13:20:31 -04:00
bce8041cce
Input: Allow per-game configuration to specify directories for input-profiles. If specified, the directories are searched recursively for inis
2018-07-07 13:02:39 -05:00
3b11066e61
Fix lint bugs
2018-07-07 13:02:38 -05:00
83c94feb3d
Input: Trim profile names to allow spaces between ','s
2018-07-07 12:55:52 -05:00
e10abaed3e
InputConfig: Show display message when game specific input profile is loaded; matching how cycling works
2018-07-07 12:55:52 -05:00
14482a72af
Input: Allow cycling to occur for each individual controller
2018-07-07 12:55:49 -05:00
485285eadc
Input: Add cycling between game specific profiles
2018-07-07 12:39:08 -05:00
3969bf6d1c
Input: Add hotkey to cycle the wiimote profile forward or backward
...
Co-authored-by: Barath Kannan <barathsotd@gmail.com>
2018-07-07 12:39:08 -05:00
9f9afeb63e
Wiimote Emulation: Be able to trigger swings consistently by holding down buttons. This makes certain actions easier (tested with Red Steel)
2018-07-07 00:49:47 -05:00
c7c93a8e80
ControllerEmu/BooleanSetting: Add exclusive flag
2018-07-02 15:15:23 +02:00
48b7cfa75c
Merge pull request #7062 from robopilot99/master
...
Add auto-hide option to Wii IR pointer
2018-06-08 14:04:03 +02:00
1c027bc148
Use UICommon's game list code on Android
...
Deduplicates code, and gets rid of some problems the old code had
(such as: bad performance when calling native functions, only one
disc showing up for multi-disc games, Wii banners being low-res,
unnecessarily much effort being needed for adding more metadata).
2018-06-06 17:34:07 +02:00
ab02499ce7
Add auto-hide option to Wii IR pointer
2018-06-04 17:58:21 -05:00
932ca644aa
Add hotplug support to SDL2 controller backend
2018-06-04 17:50:08 +02:00
7062967b5b
SDLJoystick: store name on creation
...
Otherwise, Dolphin will crash when the joystick is removed.
2018-06-04 17:49:21 +02:00
0eb47e1071
CMake: make SDL a private dep of InputCommon
2018-06-04 17:49:21 +02:00
3e4725f390
THis fixes issue #08 and #16 , the rumble test and slider
2018-04-19 17:48:55 -04:00
ee955e37a9
Merge pull request #6564 from JosJuice/translate-certain-button-names
...
Translate certain button names but not all
2018-04-14 23:20:39 +02:00
b1bbd8a50e
Merge pull request #6625 from lioncash/evdev-udev
...
InputCommon/CMakeLists: Include evdev and udev includes on a by-target basis
2018-04-13 20:50:31 +02:00
7ed28297b2
ControllerEmu: Use enum instead of bool for translatability
2018-04-13 13:04:26 +02:00
3f13dbe087
Translate certain button names but not all
...
Some button names should be translated, for instance Up, Left and such.
At the same time, some other button names shouldn't be translated,
for reasons that might be less obvious. In 0146456af
2018-04-13 13:04:26 +02:00
40bb9974f2
Reformat all the things!
2018-04-12 21:28:39 +02:00
73ebc190fa
InputCommon/CMakeLists: Link evdev and udev in privately
...
These libraries aren't directly used outside of InputCommon
2018-04-10 09:59:55 -04:00
d63d0b5069
InputCommon/CMakeLists: Include evdev and udev includes on a by-target basis
...
Avoids including the evdev/udev includes in the top-level directory
2018-04-10 09:59:51 -04:00
e93159e54a
CMakeLists: Link in system framework libraries explicitly on macOS
...
Makes our libraries explicitly link in which libraries they need.
This makes our dependencies explicit and removes the reliance on the
LIBS variable to contain the libraries that they need.
2018-03-30 16:14:10 -04:00
b8a4ab23dd
InputCommon/CMakeLists: Link in ForceFeedback library explicitly on macOS
...
Makes an implicit dependency explicit. Also makes the macOS libraries link privately
as they aren't used in the exposed interface.
2018-03-29 11:53:50 -04:00
01308330d9
InputCommon/CMakeLists: Migrate off add_dolphin_library
...
Continues the migration work started in 3a4c3bbe01
2018-03-24 14:13:53 -04:00
50a476c371
Assert: Uppercase assertion macros
...
Macros should be all upper-cased. This is also kind of a wart that's
been sticking out for quite a while now (we avoid prefixing
underscores).
2018-03-14 22:03:12 -04:00
8adce86daa
Merge pull request #6355 from myfreeweb/clang6-warning
...
Add -Wno-register to calm down clang 6.0.0 (C++17 mode)
2018-02-07 22:25:57 -08:00
9b201815f2
Ignore -Wregister to calm down recent clang and GCC (C++17 mode)
...
The 'register' keyword is used by a header included from Xlib (X11/XKBlib.h).
2018-02-05 14:43:07 +03:00
6a93223283
evdev: Always unref received udev devices
...
Whenever udev_monitor_receive_device() returns a non-null pointer,
the device must be unref'd after use with udev_device_unref().
We previously missed some unref calls for non-evdev devices.
2018-02-05 01:01:05 +01:00
0822bb347d
evdev: Don't leak eventfd on shutdown
2018-02-04 22:48:38 +01:00
9a3705f82d
evdev: Fix select() call
...
It's not guaranteed that the eventfd is smaller than the monitor fd,
because fds are not always monotonically allocated. To select()
correctly in all cases, use the max between the monitor fd and eventfd.
2018-02-04 22:45:28 +01:00
f5dc8e7737
Rename constructor parameters to avoid shadowing members
2017-12-19 12:05:06 +01:00
4733bbd8f3
Merge pull request #6166 from ligfx/invokedeviceschangedcallbacks
...
ControllerInterface: cleanup callbacks API and logic
2017-12-15 21:05:17 +01:00
6b7d5bb80c
DeviceQualifier: small cleanup
2017-11-19 12:46:39 -08:00
c62d83a34b
GCPadEmu: only connected if default device connected
...
This lets Dolphin know if a configured GameCube Controller should actually
be treated as connected or not.
Talked to @JMC47 a bit about this last night. My use-case is that all of
my controllers are the same hardware (Xbox One controllers) so share the
same configuration (modulo device number). Treating them all as always
connected isn't a problem for most games, but in some (Smash Bros.) it
forces me to go find a keyboard/mouse and unconfigure any controllers
that I don't actually have connected. Hotplugging devices (works on macOS,
at least) + this patch remove my need to ever touch the Controller Config
dialog while in a game.
This patch makes the following changes:
- A new `BooleanSetting` in `GCPadEmu` called "Always Connected", which
defaults to false.
- `ControllerEmu` tracks whether the default device is connected on every
call to `UpdateReferences()`.
- `GCPadEmu.GetStatus()` now sets err bit to `PAD_ERR_NO_CONTROLLER` if
the default device isn't connected.
- `SIDevice_GCController` handles `PAD_ERR_NO_CONTROLLER` by imitating the
behaviour of `SIDevice_Null` (as far as I can tell, this is the only use
of the error bit from `GCPadStatus`).
I wanted to add an OSD message akin to the ones when Wiimotes get
connected/disconnected, but I haven't yet found where to put the logic.
2017-11-19 16:07:00 +01:00
379e28b58c
Add GCPadStatus.isConnected boolean
2017-11-19 16:01:08 +01:00
bb1c794657
Remove unused GCPadStatus.err
2017-11-19 16:01:07 +01:00
1e24a5f309
Merge pull request #6167 from ligfx/encapsulatedefaultdevice
...
EmulatedController: encapsulate default device behind getters/setters
2017-11-11 17:11:56 +01:00
0bede93daa
evdev: Correctly calculate axis range for min values greater than 0.
...
Axis range was previously calculated as max + abs(min), which relies on the assumption that
min will not exceed 0. For (min, max) values like (0, 255) or (-128, 127), which I assume to
be the most common cases, the range is correctly calculated as 255. However, given (20,
235), the range is erroneously calculated as 255, leading to axis values being normalized
incorrectly.
SDL already handles this case correctly. After changing the range calculation to max - min,
the axis values received from the evdev backend are practically identical to the values
received from the SDL backend.
2017-11-11 02:07:04 -05:00
8e6677be90
ControllerInterface: don't call InvokeDevicesChangedCallbacks more than once when refreshing
2017-11-10 13:37:42 -08:00
fd7cbd633e
ControllerInterface: add mutex around callbacks vector
2017-11-10 13:37:42 -08:00
1ed7532af8
ControllerInterface: HotplugCallbacks -> DevicesChangedCallbacks
2017-11-10 13:37:42 -08:00
7355b5f70d
ControllerInterface: invoke callbacks in AddDevice/RemoveDevice
...
Some backends already cause this to happen, so make it consistent across
systems.
2017-11-10 13:37:41 -08:00
1b1dd1d749
EmulatedController: encapsulate default device behind getters/setters
2017-11-04 17:08:55 -07:00
79a646a67d
Prevent multiple HID elements of same usage type on OSX
...
On OSX, iterate the HID device's elements and only store the last of
each type to accommodate for flaky hardware
2017-09-15 19:19:46 +02:00
2b4bf8662a
Merge pull request #5577 from ligfx/separateexpressionparsingandbinding
...
ControlReference/ExpressionParser: separate parsing from binding
2017-09-15 19:11:57 +02:00
294b1895ef
ExpressionParser: std::move() tokens vector to parser
2017-09-14 12:53:36 -07:00
31f1c06226
ControlReference: don't reparse expression when references are updated
2017-09-14 12:53:35 -07:00
c332580b83
ControlReference/ExpressionParser: separate parsing from binding
2017-09-14 12:53:35 -07:00
ba87a50338
ExpressionParser: add FallbackExpression node type
2017-09-14 12:53:35 -07:00
7e74961eb1
ExpressionParser: expose ExpressionNode directly
2017-09-14 12:53:35 -07:00
85301e2bae
ParseStatus: replace NoDevice with EmptyExpression
2017-09-14 12:53:35 -07:00
754efd75c5
ExpressionParser: remove DummyExpression
2017-09-14 12:53:35 -07:00
f1ff1e3d08
ExpressionParser: clean up ControlExpression
2017-09-14 12:53:35 -07:00
3df945f8d0
ExpressionParser: replace bare pointers with unique_ptrs
2017-09-14 12:53:35 -07:00
bbb7c17235
ExpressionParser: use internal ParseResult struct instead of out-params
2017-09-14 12:53:35 -07:00
d2821e14fa
ParseExpression: return a std::pair
2017-09-14 12:53:34 -07:00
22a9a08b24
Add Core::State::Starting
2017-09-13 17:30:18 -07:00
696e1b40b5
Common: Move version strings to their own header
...
Ideally Common.h wouldn't be a header in the Common library, and instead be renamed to something else, like PlatformCompatibility.h or something, but even then, there's still some things in the header that don't really fall under that label
This moves the version strings out to their own version header that doesn't dump a bunch of other unrelated things into scope, like what Common.h was doing.
This also places them into the Common namespace, as opposed to letting them sit in the global namespace.
2017-09-09 19:28:10 -04:00
ef95bf26cb
Implement GamePAd and MultiAxisController detection
2017-08-24 00:31:59 -04:00
3abde44641
formatting cleanup
2017-08-23 00:19:34 -04:00
3cddb62aea
keyboard fixes v2
2017-08-22 12:26:44 -04:00
0df4f7db4f
Depreciate old OSX Keyboard and Mouse
2017-08-21 01:44:03 -04:00
918b0375e4
Merge pull request #5742 from ToadKing/fix-bad-controllers
...
Ignore capabilities reported by an XInput device
2017-08-17 03:42:02 +08:00
4fb2d1e361
Ignore capabilities reported by an XInput device
2017-08-09 22:51:01 -05:00
3b5cad6682
Merge pull request #5860 from jturcotte/fix-macos-nswitch-axis
...
Fix axis not working with Switch Pro controller on macOS
2017-08-07 13:44:07 +12:00
d3bb964d79
Merge pull request #5809 from HannesMann/master
...
Send rumble data to the adapter on a separate thread
2017-08-02 12:36:35 +08:00
56239d1ae1
Send rumble data to the adapter on a separate thread
2017-08-02 00:44:46 +02:00
200fb26148
Fix axis not working with Switch Pro controller on macOS
...
Each axis would appear as multiple elements with 0 min/max.
Filter the list of elements using the correct usage page like
done for buttons.
2017-08-01 01:58:30 +02:00
960525859b
Make DolphinWX strings more like DolphinQt2 strings
...
Same as the previous commit, except I'm copying strings
in the other direction because the DolphinWX variants
of these strings could use some improvement.
2017-07-26 08:04:10 +02:00
Jordan Woyak