107251e099
gsdx: sort crc game list
2016-11-06 16:30:51 +01:00
1547dd4215
GSDX-UI: Add Mipmap combobox
...
Mipmapping is now supported on hardware renderers thanks to Gregory. Please report any observed hardware mipmapping issues on the forums (http://forums.pcsx2.net/Thread-New-feature-Needs-testing-GSdx-HW-mode-Experimental-mipmap-support ) as potentially the HW mipmap code might still have some bugs.
2016-11-05 22:19:32 +05:30
58ed49f3c9
GSDX: Clean up warnings on MSVC
...
* Explicitly cast w_pages and h_pages into uint32.
* Prevent signed/unsigned comparison by converting lod into unsigned integer, honestly how coud a mipmapping level be negative?
2016-11-05 10:28:04 +01:00
758cf25888
gsdx: wrap bp for block ptr
...
Fix massive flickering of Beyond Good&Evil on SW renderer (HW happily overflow)
2016-11-04 23:03:12 +01:00
3d65312999
gsdx hw: remove old assert
...
Code is working fine with all formats
2016-11-04 23:02:49 +01:00
437afbbbf3
GSDX-PCRTC: Move Saturation hack to displayrect()
...
Fixes custom resolution scaling on Tribes aerial assault.
2016-11-01 17:54:46 +01:00
b871c6b46f
GSDX-TextureCache: Generalize scaling equation
...
Previously the dedicated custom resolution scaling equation was ignored for the second SetScale() call, generalizing the equations will also fix the DMC scaling issue on custom resolution. Also remove unnecessary checks for null on scale factors. The possibility for having a null scale factor value only exists on custom resolution and it will only happen on cases where the output circuit isn't ready yet. So the ideal way would be to handle all the required conditions of output circuit on "m_renderer->CanUpscale()" itself.
2016-11-01 17:54:46 +01:00
055f236aa5
GSVector: Add constructor to dispatch same values
2016-11-01 17:54:46 +01:00
aa4b2d9f3a
gsdx sw: wrap GS memory
...
Cost ought to remain small. Worst case is 2 extra "and" operation by group of pixels in scanline renderer
I think PixelAddressN functions are mostly call in the init.
2016-11-01 13:33:11 +01:00
233f66db5e
Fixed effects area wrapping calculation, which was always buggy but this
...
wasn't evident until additional addresses were precalculated.
Not expected to improve compatibility.
2016-11-01 11:12:41 +00:00
ba557e20a4
gsdx:recorder:unix: Fix thread leaking
2016-10-28 18:33:50 +01:00
7ab5cb20c8
gsdx: Don't close threads twice
...
CloseThread is called in the GSJobQueue destructor, so don't call it
again in the GSThread destructor.
Fixes #392 , which was caused by a use after free.
Also prevents pthread_join() from being called twice for each thread
on non-Windows operating systems, which is undefined behaviour.
2016-10-28 18:33:35 +01:00
bc7aa1a500
spu2-x:freebsd: Enable SDL backends
...
portaudio currently isn't providing me with sound, even though it did
before.
2016-10-27 22:03:49 +01:00
86a6f5d67c
cdvdgigaherz: s/itob/dec_to_bcd/
...
There's no need to have 2 ways to convert a u8 to a binary coded
decimal. Remove the macro version.
2016-10-26 22:11:40 +01:00
852ed21e88
cdvdgigaherz: Remove no drive support
...
It's the same as "No disc" or having no disc in the drive.
2016-10-26 17:30:28 +01:00
c023d7676a
cdvdgigaherz: Remove Source base class
...
Also remove virtuals from IOCtlSrc.
2016-10-26 17:30:27 +01:00
9f6c6d9917
cdvdgigaherz: Don't use GetFileSizeEx to get disk size
...
It doesn't seem to work for disks, and IOCTL_DISK_GET_LENGTH_INFO
usually succeeds instead.
2016-10-26 17:30:23 +01:00
9c643ae9ca
cdvdgigaherz: Remove CDVDabout and SysMessage
...
It's not accessible from PCSX2. More importantly, I don't want to port
it.
2016-10-26 17:30:21 +01:00
fb3580efa1
cdvdgigaherz: Remove unneeded code
2016-10-26 17:30:16 +01:00
5dfb7d63dc
gsdx: wrap gs page/block instead to skip them
...
Fix FMV of Thrillville when coupled with wrap_gs_mem = 1
2016-10-25 22:49:05 +02:00
db4b4fb166
gsdx ogl: keep a separate log for sw
2016-10-25 22:00:41 +02:00
cedc8aae44
gsdx: implement a shared memory to emulate the wrapping of the gs memory
...
Code can be enabled with "wrap_gs_mem = 1". Code only allow a single shared memory but
I don't think we need more anyway.
Linux only, Kernel panic expected with the HW renderer.
Fix FMV on Silent Hill 3 with the SW renderer
2016-10-25 20:29:38 +02:00
42b51611af
gsdx: don't dump debug file if not requested
2016-10-25 17:10:57 +02:00
820462dbc0
Merge pull request #1635 from sudonim1/reverb
...
SPU2-X: Reverb rewrite
2016-10-24 17:17:48 +01:00
e80ca0fa92
gsdx ogl: of course some driver don't work with GL_ARB_enhanced_layouts
...
Windows and (AMD or Intel)
2016-10-23 12:48:23 +02:00
885ef7a46f
gsdx ogl: reduce complexity of driver detection
2016-10-23 12:43:50 +02:00
565cb70875
gsdx ogl: don't request arb_texture_barrier for the SW renderer
...
Allow[1] to use the mesa software emulated driver to test EGL.
[1] also need export MESA_EXTENSION_OVERRIDE="GL_ARB_buffer_storage"
2016-10-23 12:13:57 +02:00
1668392988
SPU2-X: Mass reverb register renaming. Hopefully I didn't screw up the
...
cross-channel reflection registers.
2016-10-22 19:16:11 +01:00
9a51820dec
SPU2-X: Experimental reverb based on Dr. Hell's
...
http://drhell.web.fc2.com/ps1/ and/or Martin Korth's
http://problemkaputt.de/psx-spx.htm reverse engineering.
Negate final reverb output (don't know why but it's an
improvement when comparing the waveform).
2016-10-22 19:16:11 +01:00
01f0f436ac
gsdx linux replayer: allow to repack gs dump
...
linux_replay = -N will save N first frames to a new gs dump
Save disk space & debug time
2016-10-22 13:22:28 +02:00
99c43881df
gsdx egl: report an error if we fail to bind the openGL API
...
It seems Nvidia added openGL support in 355 (whereas I have 352 on debian).
I don't know the status on AMD.
2016-10-22 13:22:28 +02:00
d4a163e9cc
spu2: improve format consistency
2016-10-22 13:22:28 +02:00
1f44c4be2f
SPU2-X: PSX games should be able to read ENDX correctly now, which is
...
important functionality for many sound engines.
Fixed two other obvious errors in the psx compatibility merge, probably
inconsequential.
2016-10-20 04:17:03 +01:00
8fdf973e66
gsdx glsl: add basic support of GL_ARB_enhanced_layouts (GL4.4)
...
Hardcode location of interface to the location 0. If I understand the
spec correctly (unlikely), variable in interface will get successive
location.
Goal is to reduce driver work. Instead to compute some location based on
name matching approach (and silly validation), the driver can now use
static allocation.
Tests on future Mesa 13 are welcome
2016-10-19 23:03:39 +02:00
b1f2d27ddf
gsdx: move Haunting Ground CRC to dx level
2016-10-19 21:10:44 +02:00
264b764d6e
gsdx tc: improve haunting ground hack to remove the bloom effect
...
Just clear the buffer. The generic solution will be a copy from buffer A
to buffer B But it requires
1/ a big buffer A (otherwise it would overflow)
2/ a line width rescaling (+ the upscaling mess support)
2016-10-19 19:31:32 +02:00
c2cf8e528c
gsdx ogl: tekken5: only trigger channel effect shader when frame buffer is a single page
...
Fix missing model regression.
2016-10-17 19:34:55 +02:00
604d3bac3c
clang format: set SpacesBeforeTrailingComments to 1
2016-10-16 21:42:31 +02:00
8945ace3f7
GSDX-UI: Remove Trilinear options at some cases
...
Currently the Trilinear option only works on OpenGL. Remove it from combobox when other renderers are used.
2016-10-16 17:36:30 +01:00
45be4626f6
GSDX: Add an enum for texture filtering
...
Also re-order the combobox to make it look consistent with the tooltip description.
2016-10-16 17:36:30 +01:00
cc4cc342c2
gsdx hw: add a special sub target invalidation for haunting ground
...
Fix a wrong blending/blooming
Based on CRC to reduce impact on others games (speed)
2016-10-16 17:32:57 +02:00
31248da3d1
gsdx sw: Fix 16 bits date test on SSE build
...
AVX Builds were fixed in this commit a1a842b07f
2016-10-16 16:48:23 +02:00
defdd27987
gsdx: set m_nativeres to true in replayer
...
Otherwise you can't compare draw call between native and upscaled
2016-10-16 16:48:23 +02:00
f5e096a66f
spu2x: indicate pitch modulation and noise enabled status in the visual debugger
2016-10-16 14:15:12 +02:00
c284459382
gsdx tc: allow to search old depth/color in texture cache
...
But give higher priority to recent buffer.
Fix cut scene issue in Jak II (and potentially various game when EE/VU hacks are used)
2016-10-15 18:08:00 +02:00
7bb201a1d2
gsdx tc: move code to allow to lookup an older target if none was found
...
Next step is to enable it by uncommenting line 452
2016-10-14 22:03:29 +02:00
24684033ca
gsdx: enable clut_load_before_draw option on Harley Davidson (CRC hack)
...
At least the game is good until we find how the HW really behave
2016-10-14 20:47:18 +02:00
2c0a4ac906
gsdx ogl: add an extra debug log level
...
Avoid too much log
2016-10-14 20:46:58 +02:00
3c30db965d
gsdx gui: add a combo box on linux (below Interlace)
...
3 states are off/half/full. I'm too lazy to create a better combo box.
The hack option will be removed when Windows GUI is ready
2016-10-14 19:26:58 +02:00
37a1230c01
gsdx: reduce code duplication for key event
2016-10-14 19:26:58 +02:00
a4658eac24
gsdx hw: allow overlapping of texture (alpha) and framebuffer (RGB)
...
Fix HUD on Berserk
v2: use fbmask instead of hacking the target format to 24 bits.
2016-10-14 19:26:27 +02:00
25e76d0564
gsdx ogl: use an invalid value for stencil state
...
Fix shadow in WWE Smackdown Vs Raw 2006
2016-10-14 19:01:18 +02:00
51c64fcbe6
gsdx sw: trick GetFeedbackOutput to handle basic merge loopback
...
It is enough for Xenosaga.
2016-10-14 18:13:20 +02:00
deb2ed3d09
gsdx ogl: reimplement merge circuit to support feedback write
2016-10-14 18:13:20 +02:00
06055add5c
gsdx merge: get a new buffer for the feedback write
2016-10-14 18:13:20 +02:00
317a464278
gsdx shader: RGB => YUV conversion
...
Required for write feedback emulation
2016-10-14 18:13:20 +02:00
6ef5607d99
gsdx shader: add a shader to render text for OSD
...
Gregory: code extracted from the OSD PR to reduce conflict
2016-10-14 18:13:20 +02:00
d84d30fe87
gsdx: Add color component to OGL shaders
2016-10-14 18:13:20 +02:00
7ca9ca9465
gsdx: new parameter for merge virtual function
...
* Add full PMODE register to replace slbg/mmod
* Add full EXTBUF register (will allow to emulate write feedback)
* Add a third source (which will actually be the destination of the
write feedback)
2016-10-14 18:13:20 +02:00
357dcdb55e
GSdx: Move alpha stencil hack back to original location
...
Avoids skipping the alpha stencil hack.
2016-10-14 16:36:17 +02:00
fbf7ccbdda
gsdx: by default new will throw std::bad_alloc
...
So catch/use it and don't bother with GSDXErrorOOM
2016-10-13 20:44:59 +02:00
c440c7c93a
gsdx gui: update the filter combox box with new trilinear options
...
OpenGL only
v2: update setting tooltip based on turtleli feedback
2016-10-13 20:16:38 +02:00
5ced9c1f19
gsdx mipmap:ogl: plug trilinear/mipmap2 option
...
mipmap option 3. Actually maybe a separate tri-linear option will be better
m_mipmap == 2 => use manual PS2 trilinear/mipmap
Otherwise
m_filter == 3 => always use full automatic trilinear interpolation
m_filter == 4 => use automatic trilinear interpolation when PS2 uses mipmap
m_filter == 5 => like 4 but force bilinear interpolation inside layer
2016-10-13 20:16:38 +02:00
c2777ff989
gsdx state: split IsMipmapActive in 2 pieces
...
This way we can test if a draw call requires a triliner filtering.
It will be used in next commit to implement automatic trilinear
2016-10-13 20:16:38 +02:00
1b9b47dd6a
gsdx mipmap:ogl: add capabilities to automatically generate mipmap layer
2016-10-13 20:16:38 +02:00
510eccd471
gsdx mipmap: enable fully tri-linear filtering
...
(when mipmap > 1)
2016-10-13 20:16:38 +02:00
a8a2db8eb1
gsdx mipmap:ogl: extend HW sampler with tri-linear filtering
...
v2:
* use nice enum
* use bilinear info when there is no mipmap (more accurate)
2016-10-13 20:16:38 +02:00
335d7f3ae5
gsdx: add a nice enum for min filter
2016-10-13 20:16:38 +02:00
7ea0e90678
gsdx mipmap:ogl: extend shader to support trilinear filtering
2016-10-13 20:16:38 +02:00
d185a85a07
gsdx ogl: replace simple_sample variable by the opposite shader_emulated_sampler
...
It feels easier to read this way
2016-10-13 20:16:38 +02:00
ae441e6a2c
gsdx mipmap:HW: Update all valid texture layers
2016-10-13 20:16:38 +02:00
5d593dd948
gsdx mipmap:HW: save state of both min&max lod values
2016-10-13 20:16:38 +02:00
15b1d8d3f0
gsdx mipmap:tc: add code to update a single layer of a mipmap
2016-10-13 20:16:38 +02:00
dbb4bdf59f
gsdx mipmap:ogl: add GL_TEXTURE mipmap support
...
* Allocate more memory for extra layers
* Allow to upload data in any layers
2016-10-13 20:16:38 +02:00
76bd968c59
gsdx mipmap: extend texture/cache to support a layer parameter
2016-10-13 20:16:38 +02:00
b695e0065a
gsdx mipmap: use a 3 state option
2016-10-13 20:16:38 +02:00
679f3347bb
cdvdgigaherz: Read raw CD sectors one by one ( #1590 )
...
A multi sector raw disk sector read that reads data from two tracks of
different types will not complete successfully. Reading the sectors one
at a time should fix the issue.
2016-10-10 22:33:15 +01:00
039573b133
clang-format spu2x
...
Note: it doesn't play well with define around forceinline (might need to fix the inline btw)
And a single macro in RegTable.cpp
2016-10-10 20:41:24 +02:00
36631f2270
remove a useless define
...
cosmetics
more cosmetics
some more cosmetics? sure!
whitespaces
whiterspaces
2016-10-09 20:10:53 +02:00
95fe77a594
bad merge fix
2016-10-09 16:15:19 +02:00
19a8ed8b25
psxmode: Spu2x: more native SPU2 reghandlers. first "working" reverb! (everything before was just random data)
2016-10-09 15:52:47 +02:00
ee05137415
psxmode: Spu2x: add reverb register handling, fix a problem with the address translation, re-enable "VMIXEL" writing (which should just be named Echo/Effect ON or EON really)
2016-10-09 15:52:47 +02:00
1ec70f1df3
psxmode: Spu2x now working correctly. Kudos to pseudonym. Took him 30 minutes to fix this!
2016-10-09 15:52:46 +02:00
08b6edae80
psxmode: further spu2x work
2016-10-09 15:52:45 +02:00
3aabc1adbf
spu2x work 1
2016-10-09 15:52:05 +02:00
9af34cc611
gsdx tc: miss a set scaling call
...
Likely impact issue #83/#694
2016-10-09 13:07:08 +02:00
3b733930fe
gsdx: UserHacks_TextureInsideRt must be disabled by default
...
Likely a bad copy/past
2016-10-09 12:13:37 +02:00
344636d88e
gsdx ogl: attach input texture before copy
...
Help to ensure with copy the good texture in debugger
2016-10-08 23:42:39 +02:00
22ebdcf1cf
gsdx debug: create a nice dump function for kernel gs registers
...
Add missing register
2016-10-08 23:42:39 +02:00
ab228c8484
Added missing CRC for Grand Theft Auto San Andreas.
2016-10-08 18:38:50 +03:00
db853b4462
GSdx: Add Jak 2 US CRC to GSCrc list.
...
Fixes issue: https://github.com/PCSX2/pcsx2/issues/1603
2016-10-07 13:14:15 +03:00
574a807678
gsdx tc: new hack to extract texture from rt
...
UserHacks_TextureInsideRt = 1 (don't look at Jak)
2016-10-07 01:43:04 +02:00
8873b27eb8
gsdx: let's keep the new clut option off
...
There are still issue with virtua fighter (albeit my dump is better...)
2016-10-06 22:05:03 +02:00
79666b26c0
gsdx sw: restore the const reference
...
It was removed for PSX hack which was removed a couple of commits ago
2016-10-06 20:02:22 +02:00
c66004bbb2
gsdx: hidden option to better support dual context clut
...
Option is on by default. Just a safety net in case of regression
Fix clut issue on virtua fighter (SW) and harley davidson (SW/HW).
2016-10-06 19:08:21 +02:00
9cd4984f7c
gsdx debug: more log
2016-10-06 18:56:31 +02:00
d827497403
gsdx: let's handle illegal 4 bits format too
...
In doubt if some games use them.
2016-10-05 22:07:49 +02:00
9b93c07339
gsdx: Handle illegal 8 bits format. Found the most silly GS dev trick
...
Fix Berserk #1526 Well done guys but we're more clever than you ;)
So instead to mask the color channels as any guy that RTFM, they decided to use the illegal 8H frame format
2016-10-05 22:07:43 +02:00
6fd46eb36a
gsdx: move the validation of the texture format before the draw call
...
Avoid false positive when game write dummy stuff
2016-10-05 22:07:23 +02:00
a0629587be
gsdx memory: implement read texture of PS GPU24
...
convert the swizzled block as tightly packed 24 bits RGB
Then convert scanline to standard 32 bits RGBA
The HW renderer requires the preload data hack
2016-10-05 21:59:42 +02:00
1c900e780a
gsdx memory: add a PS GPU 24 bits format
...
Same swizzle as 16 bits. But contains tightly packed RGB pixels.
2016-10-05 21:06:38 +02:00
1cc696ab31
gsdx hw: update TEST.ATE field after ATE optimization
...
Otherwise DoFirstPass/DoSecondPass will give you result based on pre-ATE optimization
Close #1607
2016-10-05 09:43:24 +02:00
3653a7746a
gsdx psxmode: small hack to "see" video until we found a better solution
2016-10-05 09:43:24 +02:00
677f890c5c
gsdx debug: static GSState::s_n
...
This way you can access the current draw call anywhere. Very useful for debug.
2016-10-05 09:43:24 +02:00
61333ecb40
gsdx debug: trace register access
...
I didn't include high frequency register such as vertex stuff
main goal is to give the possibility to trace the texture/clut update
2016-10-05 09:43:24 +02:00
1b8d6a38e7
Merge pull request #1586 from PCSX2/gsdx-refresh-gui-options
...
Gsdx refresh gui options
2016-10-04 18:30:48 +02:00
354aa6831b
gsdx ogl: brain hang in the middle of the line
...
Only impact if bilinear is forced
2016-10-03 18:52:02 +02:00
5b72fab2e4
gsdx ogl: depth regression from 866173a481
...
Only mask depth if the min value is too big
Issue #1602
2016-10-03 18:32:54 +02:00
3be055a366
gsdx hw: remove code to detect an effect
...
It was a tentative to emulate GTA radiosity but the new hack is more generic
2016-10-02 18:29:23 +02:00
49c44db635
gsdx:dx: make filtering right
...
WMS/WMT 2 is the region clamping mode.
Hw unit can't emulate it right so it can give you bad filtering (Fix #1025 )
Note: I only did the fix because I wanted to remove the TEXA hack. Otherwise
it is still recommended to use openGL
2016-10-02 18:21:52 +02:00
7f4791fa85
gsdx hw: improve no_ds detection
...
Support ZTST_NEVER as no depth read => psx mode speed boost
Use zm/fm to reduce further depth lookup
2016-10-02 18:21:52 +02:00
c3ac3ecbe7
gsdx hw: move try alpha test at the beginning
...
Will allow to use alpha test optimization to better optimize depth lookup
Require to do clut handling before
2016-10-02 18:21:52 +02:00
dc365e066d
gsdx tc: remove old plain TEXA hack
...
It must work fine without it now.
From the google code comments:
It would be nice to test those games
* Ar Tonelico 2 (line in sprite regression?)
* breath of fire dragon quarter (overlayed user interface in the game)
v2: update Dx code to use the good format
2016-10-02 18:21:52 +02:00
cf13cccb1e
gsdx: avoid useless spamming of INVALID PSM in release build
2016-10-02 18:21:41 +02:00
955a69b16e
gsdx ogl: fix GT4 regression (wrong texture on timing)
2016-10-02 12:16:48 +02:00
c7c6566bca
gsdx hw: of course the full Jak series will kill me
2016-10-02 11:57:09 +02:00
b6638d4eec
gsdx hw: forgot to comment an unused variable
...
Keep the code in case, we better solution is found to validate the depth/frame format
2016-10-02 10:18:15 +02:00
3996fbe365
gsdx hw: reduce conplexity around TryAlphaTest
...
* As sw renderer, don't bother to bypass it when it is ATST_ALWAYS
* Don't update the ATE register value
=> It is a really bad idea. Next draw call will be wrong if TEST register isn't written.
The TryAlphaTest context could have been updated
2016-10-01 19:20:49 +02:00
c5f086b385
gsdx ate: separate the code that depends on TEST.AFAIL
...
Easier to read and allow a switch optimization
Add a shortcut for the common ATST_ALWAYS case
2016-10-01 19:20:38 +02:00
4612b79575
gsdx: add a warning on vertex trace
...
Due to a division by 2, depth lsb bit is always 0
I'm not sure it is critical but let's keep a note for the future
2016-10-01 19:16:44 +02:00
d1e07295e7
gsdx linux: add the missing gui option for unscale point/line primitive
2016-10-01 19:16:44 +02:00
5e1064da55
gsdx: remove the safe accurate blending hack
...
V2: Integrate Flatout patch to do the Window side
2016-10-01 19:15:52 +02:00
f77c1900fa
gsdx tc: always clear a new depth buffer
...
Random data isn't a good idea for a depth buffer. It can cause flickering. (Jak2 FMV)
Hopefully it won't impact too much the speed.
2016-10-01 19:00:17 +02:00
9c84712640
gsdx hw: enable palette read back on Jak2
2016-10-01 18:47:21 +02:00
5d93a392e4
gsdx hw: xman half screen correction
2016-09-30 22:25:24 +02:00
29c25bc375
gsdx clut: disable some assertions often fired
2016-09-30 22:24:38 +02:00
34686394a6
gsdx hw: add an hack for Jak3
...
I'm disappointed...
Read back palette written by the GPU. Avoid strange color on the skin.
2016-09-30 19:22:16 +02:00
df2f8684d6
gsdx: improve TC cache log
2016-09-30 19:18:58 +02:00
8d24aa2b39
gsdx: GoW2 half screen bug
...
... Seriously ...
2016-09-30 19:15:25 +02:00
fc32b749dd
onepad: fix a pad regression on odin sphere
2016-09-30 10:25:14 +02:00
8d4fadb3c8
Revert "gsdx state: TEX0 write behavior might depends on the context"
...
This reverts commit b34243fa7b
2016-09-28 20:00:56 +02:00
90ad9cf668
gsdx hw mipmap: tune the rounding + remove previous hack
...
GS really uses an invalid texture located at 0.
Improve the rounding for R&C. The idea is to avoid the corner case were only
the corner of the triangle touch the 7/16 edge.
2016-09-28 19:41:12 +02:00
adb8be3287
gsdx: add/update comment
...
Need to investigate why the number of vertex is different in upscaled resolution
2016-09-28 19:41:12 +02:00
749037346c
gsdx: report an error if PSM is invalid
2016-09-28 19:41:12 +02:00
fea31f7422
gsdx: don't use virtual when it is useless
2016-09-28 19:41:11 +02:00
97172f5e51
gsdx debug: count draw call in a different way
...
* Always do +1 before the draw call
* Prefix texture name with i (as input) to keep them before the FB
Goal is to ensure that all renderers share the same draw call value.
2016-09-28 19:41:11 +02:00
b34243fa7b
gsdx state: TEX0 write behavior might depends on the context
...
Game: harley davidson
* write tex0 ctx0
* write tex0 ctx1
* draw ctx 0
Previous GSdx behavior will load the clut every write of TEX0. In the
above case the draw will take the wrong clut.
To be honest, it could be a wrong emulation on the EE core emulation.
The hardware likely got a single clut (1KB cache is quite expensive)
So clut loading must be skipped if the context is wrong.
Next draw will use the ctx1 clut so I apply TEX0 when the context is switched
Please test harley davidson :)
v2: detect context switch from UpdateContext function
V3: always set m_env.CTXT[i].offset.tex, avoid crash (Thanks to FlatOutPS2 that spot the issue)
V4: move bad psm correction code (rebase put it in the wrong place)
2016-09-27 10:04:09 +02:00
e0961d81a0
gsdx HW: use after free crash
...
Free bt
3 0xe676d194 in ~Source ../plugins/GSdx/GSTextureCache.cpp:1526
4 0xe676d194 in GSTextureCache::SourceMap::RemoveAt(GSTextureCache::Source*) ../plugins/GSdx/GSTextureCache.cpp:1990
5 0xe676f0fe in GSTextureCache::IncAge() ../plugins/GSdx/GSTextureCache.cpp:1022
Use bt
0 0xe6772a83 in GSTextureCache::LookupSource(GIFRegTEX0 const&, GIFRegTEXA const&, GSVector4i const&) ../plugins/GSdx/GSTextureCache.cpp:204
1 0xe66b0c9f in GSRendererHW::Draw() ../plugins/GSdx/GSRendererHW.cpp:579
2 0xe66fb43e in GSState::FlushPrim() ../plugins/GSdx/GSState.cpp:1509
Hypothesis the m_map array of list contains an invalid pointer
It is populated GSTextureCache::SourceMap::Add based on the coverage. The coverage is based on the offset.
So offset is potentially wrong. As mipmap code hack the offset value. It would be a nice culprit.
This commit avoids a potential bad transition between MIPMAP (which
overwrite the "offset") and the base layer (which wrongly keep an old "offset")
Conclusion, pray for my soul as it is very hard to reproduce
2016-09-26 20:34:38 +02:00
04d82d8127
gsdx: size doesn't count but 0.625 might change your life :p
2016-09-26 19:42:07 +02:00
be9995bd1e
gsdx mipmap: improve robustness to avoid potential crash
2016-09-26 09:27:03 +02:00
ebb2a8ad5a
gsdx debug: Add DISABLE_WIP_ASSERTION
...
To easily disable assertion on codes that only require investigation
2016-09-25 20:00:51 +02:00
ca4f265ce6
gsdx debug: dump mipmap register could be useful now :)
2016-09-25 20:00:51 +02:00
ef9a144437
gsdx hw: extra trick for the mipmap
...
Ratchet & Clank (the third) uses an address of 0 for invalid mipmap.
It would be very awkward to put the middle layer of texture in start of
memory. So let's use this information to correct the lod.
It make the game more robust on the lod rounding
2016-09-25 11:54:00 +02:00
78b2848622
gsdx: factorize the TEX0 generation for mipmap
2016-09-25 11:51:48 +02:00
ccd9ce1728
gsdx hack: move tales of legendia hack to full move
...
Also remove the OI hack which is handled by the generic double half clear
2016-09-25 10:17:08 +02:00
e229dc1549
gsdx hack: move Resident Evil 4 to full level
...
The CRC hack removes the fog, without the hack the screen turns green with D3D,, but the fog emulates correctly on OGL with hardware depth.
2016-09-25 10:13:21 +02:00
ad8a84a532
gsdx hw: reduce hack of Spyro series
...
Based on the comment, it ought to be fixed with previous commit.
2016-09-25 10:08:55 +02:00
7f871b0cc6
gsdx hw: remove various CRC hack that ought to be fixed with previous commit
...
* SpidermanWoS
* TyTasmanianTiger
* TyTasmanianTiger2
* DigimonRumbleArena2
* XmenOriginsWolverine
* CallofDutyFinalFronts
* GoW2 (only in openGL)
2016-09-25 10:08:54 +02:00
1e343084e2
gsdx hw: group the double half clear with gs mem clear hack
...
It avoid redundant check of the GS context
You can disable the extra clear with UserHacks_DisableGsMemClear = 1
2016-09-25 10:08:54 +02:00
6c6ed5f443
gsdx ogl: trigger the special RW framebuffer shader when only Alpha is written ( #1588 )
...
* gsdx ogl: trigger the special RW framebuffer shader when only Alpha is written
It will work for both Jak and Ratchet&Clank and without CRC
2016-09-25 10:05:44 +02:00
6e2bf98d5f
gsdx hw: round mipmap lod value
...
Will avoid some corruption based on distance/angle
2016-09-24 20:05:39 +02:00
719982e4a3
gsdx hw: forget to update a parameter
...
OMG, fixes various mipmap issues
2016-09-24 18:57:47 +02:00
76494e5f9c
gsdx hw: add an userhack for hw mipmap
2016-09-24 12:39:31 +02:00
e38aba0dff
gsdx: rename SW texture dump filename
...
* Use texraw for the unconverted texture (keep index fmt)
=> avoid bad filename order with the multiple texture layers
* add the real mipmap address
* Use a nice string format
2016-09-24 09:15:40 +02:00
d89b09427f
gsdx: gl logging is only available in MTGS thread
...
Fix crash in debug build
2016-09-22 17:54:44 +02:00
b00ae974d2
gsdx ogl: fix bad interaction between accurate blending and geometry shader
...
Recent optimization allow to use triangle to render sprite even when gs is supported
close #1574
2016-09-20 09:30:24 +02:00
c64e8f944e
cdvdgigaherz: Fix printf sign mismatch warnings
...
Fixes warning C6340: printf sign mismatch
Only remaining warnings for cdvdGigaherz (using level 4 warning
settings) are:
C6258: TerminateThread does not allow proper thread clean up
C4201: nonstandard extension used: nameless struct/union (from the
lo/hi u128 struct in common/include/Pcsx2Types.h)
2016-09-20 01:24:23 +01:00
57d029f34a
cdvdgigaherz: Use INT_PTR for dialog handler return type
...
BOOL is not the correct return type (though it works for 32-bit).
2016-09-20 01:23:47 +01:00
0ca36e8943
cdvdgigaherz: Fix value truncation warnings
...
Fixes warning C4244: conversion to smaller data type, possible loss of
data.
2016-09-20 00:47:15 +01:00
a61aa8ff0b
cdvdgigaherz: Remove unreachable return
...
Fixes warning C4702: unreachable code
2016-09-20 00:46:33 +01:00
2967d5d3f1
cdvdgigaherz: Reformat with clang-format
2016-09-19 19:53:00 +01:00
60da39712c
cdvdgigaherz: Remove unused code/macros/variables/etc
...
The SPTI code is unused, and it's simpler to just use the Windows
ioctls/API if they work (only raw disk sector reading is an issue and
the SPTI workaround is already in place).
2016-09-19 19:50:55 +01:00
b91bd3ea01
gsdx dx/gl: fix potential bug in alpha test handling
...
Depth test must remain disabled if write were masked.
Bug was detected on ICO (sea/sky) but the previous commit removes
the wrong ATE draw call.
2016-09-19 08:56:49 +02:00
6966e08306
gsdx: move alpha test optimization in base class
...
One code for all renderers :)
2016-09-19 08:48:32 +02:00
38b77397e0
gsdx hw: remove custom Ty Tasmanian Tiger / Simposons OI hack
...
Replaced by the generic OI_DoubleHalfClear. If OI_DoubleHalfClear is fast/safe enough, it
will enabled by default in the future.
2016-09-18 18:50:16 +02:00
6558317a7e
gsdx: s/m_eq.xzyf & 4/m_eq.z/
...
Much better this way
2016-09-18 18:50:15 +02:00
7a40b27931
gsdx CRC: move GTA hack to full level
...
You can now emulate the radiosity effect with the UserHacks_AutoFlush hack.
2016-09-18 18:50:15 +02:00
0f387a8e3c
Merge pull request #1535 from PCSX2/clang-tidy-macro-parenthesis
...
clang-tidy: use parenthesis around macro parameters
2016-09-18 18:48:04 +02:00
15fbd6fbf4
cdvdgigaherz: Remove ISO file reader ( #1569 )
...
It doesn't support dual layer ISO images, and the ini has to be edited
manually so it loads an ISO image ("$" has to be prepended to the ISO
path as well). The PCSX2 internal ISO file reader is probably better in
most/all aspects and I don't think it's worth copying the logic from
PCSX2 into the plugin.
2016-09-18 18:38:21 +02:00
310f13a2f7
gsdx ogl: only use geometry shader to convert big enough draw call ( #1554 )
...
gsdx ogl: only use geometry shader to convert big enough draw call
The purpose of geometry shader is to reduce bandwidth (72 bytes by sprite)
and CPU load.
Unfortunately it increases CPU load due to extra shader validations.
So geometry shader will only be enabled for draw call with more than
16 sprites (arbitrarily, smallest number before shadow hearts plummet)
v2: don't disable geometry shader in replayer.
It is easier to spot sprite rendering and to manually read vertex info.
2016-09-18 16:58:02 +02:00
2a60264e40
gsdx replayer: improve error message when file is corrupted
2016-09-18 16:52:35 +02:00
6e6eae7844
pcsx2:gsdx:spu2x: use parenthesis around macro parameters
...
For safety reasons.
2016-09-18 16:13:55 +02:00
64d499af6e
pcsx2|spu2x: remove unused macro
2016-09-18 16:13:29 +02:00
b1d446895b
GSdx: replace IsTopLeftAligned macro with a function
2016-09-18 16:13:28 +02:00
f0a54bf6e3
spu2x: replace EMITC macro with a function
2016-09-18 16:13:28 +02:00
5ef2d538a0
gsdx hw: only keep a single half clear implementation
2016-09-18 13:16:59 +02:00
a0c1719695
gsdx hw: DoC takes 3
...
Add support for 16 bits format too. Fix shadows.
2016-09-17 12:06:43 +02:00
ebdf54a60b
gsdx sw: don't enable auto flush hack in replayer
...
Otherwise we don't have same number of draw call in HW/SW which is
awful to compare
2016-09-17 12:05:05 +02:00
3546d54e3b
gsdx hw: improve the vertical half clear for DoC
...
Previous assumption that crazyness was used to clear the buffer is wrong.
It was also used to write a constant color to the buffer.
2016-09-17 10:34:35 +02:00
4d5e051387
gsdx: Fix missing "\n" in rc file
...
It stops Visual Studio from asking to normalise the line endings
everytime the resource editor is used.
2016-09-16 23:42:54 +01:00
91b2e5bdbb
Merge pull request #1564 from FlatOutPS2/master
...
GSdx: Add Windows UI options for HW hacks
2016-09-16 23:35:45 +01:00
7b9654f164
gsdx hw: CRC based solution to solve half screen issue on FFVII Dirge Of Cerberus
...
The trick is that the depth buffer is actually the right of the frame buffer
2016-09-17 00:02:32 +02:00
55b0be36cd
GSdx: Add cancel button to Hacks dialog
...
Add a cancel button to the Hacks dialog to make it easier for the user
to exit the window without making changes.
2016-09-16 23:22:13 +02:00
5420fcaf3a
GSdx: Add Windows UI options for HW hacks
...
Add UI options for Auto Flush and Unscale Point Line HW hacks.
2016-09-16 23:19:05 +02:00
3994141d40
gsdx sw: always enable the auto flush hack on the SW renderer
...
There are enough option. Will remove it if too slow.
Positively impact Jak, GTA, Battlefield 2
2016-09-15 17:24:40 +02:00
1a1d6ab478
gsdx: handle the invalid format 0x3
...
International Super Star Soccer seems to use it.
It could be a core bug, in doubt uses the likely expected standard 0x13
2016-09-14 19:22:45 +02:00
4796803c33
pcsx2: Remove == true/false for boolean logic ( #1556 )
...
As discussed in #1553
Clang Tidy reports goes from 156 to 9.
Remain some macro in spu2x + a deadcode line
2016-09-10 20:08:14 +02:00
77e128aa11
Merge pull request #1557 from turtleli/freetype
...
3rdparty: Add Freetype and link to GSdx
2016-09-10 14:04:26 +01:00
72d3e4e03f
windows: Add freetype to solution and link to GSdx
2016-09-10 12:36:56 +01:00
4ebe739b44
pcsx2: remove various unused variable
...
Warning can be reenabled on GCC
A warning isn't fixed as potentially the code is wrong
../pcsx2/gui/MemoryCardFolder.cpp: In member function ‘void FolderMemoryCard::FlushFileEntries(u32, u32, const wxString&, MemoryCardFileMetadataReference*)’:
../pcsx2/gui/MemoryCardFolder.cpp:1027:10: warning: unused variable ‘filenameCleaned’ [-Wunused-variable]
bool filenameCleaned = FileAccessHelper::CleanMemcardFilename( cleanName );
2016-09-10 00:09:05 +02:00
ccf198a80b
gsdx ogl: fix a regression on Okami
...
Strangely the game uses large texture to handle texture buffer.
I think it plays with WMS/WMT. I'm not sure texture shuffling is 100%
correct here. But without it, it's completely broken.
2016-09-09 21:51:23 +02:00
8c1722faa2
gsdx: add a note that Jak shadows can be handled with HW GL without auto flush hack
2016-09-09 21:08:15 +02:00
64a97483fb
gsdx: add Jak3 US too
2016-09-09 21:05:00 +02:00
de480ec0f5
gsdx: add crc hack for Jak
...
* 0x9C712FF0, Jak1, EU
* 0x472E7699, Jak1, US
* 0x2479F4A9, Jak2, EU
* 0x12804727, Jak3, EU
* 0xDF659E77, JakX, EU
Please report me the CRC of the US version too so I can add them.
Please test the shadows rendering (openGL HW + accurate blending at least basic)
2016-09-09 19:44:04 +02:00
d540dbec79
cdvdgigaherz: Fix event handle memory leak
...
Also bump the version to 0.10.0.
2016-09-08 23:46:05 +01:00
303996818c
cdvdgigaherz: Delete duplicate PlainIso file
2016-09-08 23:14:26 +01:00
d27d2dd520
fix compilation issue
2016-09-09 00:11:02 +02:00
c2b67ccb78
gsdx ogl: implement an alternate shader for Jak Shadows
...
The game sets the framebuffer as an input texture. So I did the same for
openGL. Code is protected with a CRC. It is working because the game want to sample
pixels.
For the record, I tested it GTA too, it doesn't work as expected because
the game will resize the framebuffer to a smaller one. So you don't have
the guarantee that pixel will be read before a data write.
Note: it requires at least accurate blending set on basic
Note: I need CRC of all Jak games that suffers of this issue. Thanks you :)
2016-09-08 23:58:13 +02:00
c03b388786
Merge pull request #1551 from PCSX2/clang-format-v2
...
Clang format v2
2016-09-08 22:53:21 +02:00
e503534ff4
reformat CDVDiso
2016-09-08 21:54:50 +02:00
d6ae5bfafa
reformat lilypad
...
Note: I'm worried on the EXPORT/CALLBACK behavior on multiple OS
2016-09-08 21:54:49 +02:00
f06f44c30a
reformat onepad
2016-09-08 21:52:49 +02:00
0abf686406
pre-fomat onepad
...
Clang doesn't move back the '{' if there is a comment on the if line
2016-09-08 21:52:49 +02:00
1f8a0db290
reformat null plugin with pointer symbol on the right
2016-09-08 21:52:49 +02:00
f9d8cb97c0
Merge pull request #1508 from PCSX2/gsdx-allow-sso-amd
...
Finally AMD delivered the fix to support separate shader object !!!
2016-09-08 21:47:32 +02:00
6ee841319f
gsdx: help stupid compiler to allow 32 byte move
...
Default copy-constructor is eight 32 bits move
GSRendererOGL::Lines2Sprites code shrinks from 510B to 398B
(loop of the function 296B => 181B). Hopefully it will reduce the cost
to convert line to sprite on the CPU (i.e. when geometry shader is disabled)
2016-09-08 20:01:05 +02:00
aba0c733cd
gsdx linux: add a gui check box to control previous hack
2016-09-08 17:34:28 +02:00
029d74f855
gsdx: add an auto flush hack to implement a Read Write GS effect.
...
It impacts all renderers. It ought to fix issue in GTA radiosity,
Shadows in Jak series. (note shadows will suck in upscaling)
Implementation is really brutal. Expect a massive slow down, but at least we can test the effect
easily.
Normally perf impact will remain reasonable if the game doesn't use a Read-Write effect
Performances number are welcomes (my guess is really awful in HW mode, slow in SW mode).
You can enable it with "UserHacks_AutoFlush = 1"
2016-09-08 17:25:59 +02:00
bcb951077d
gsdx: c_str() is useless when parameter is a string
...
Reported by clang tidy
2016-09-07 22:10:50 +02:00
145d6e29c2
gsdx: increase the allocation of the GS memory
...
GS memory is only 4MB but rendering is allowed to be 2048x2048
with 32 bits format (so 16MB). Technically the frame/depth buffer can start
at the end of the GS memory. Let's not waste too much memory.
Fix crash with BASARAX
(game draws a 2048x1664 32 bits area)
2016-09-07 08:34:24 +02:00
c638e5ec87
gsdx debug: use a pretty format name when dumping texture
...
Much faster to read the format on the file name :)
+ remove a couple of useless ifdef
2016-09-07 08:34:24 +02:00
6abd806539
gsdx perf: print frame time distribution
2016-09-07 08:34:24 +02:00
244bb555f9
Merge pull request #1532 from ssakash/Coverity
...
PCSX2: Fix a bunch of coverity defects
2016-09-05 20:16:13 +02:00
cedc4f241d
gsdx hw: add a crc hack for Dragon Quest & Final Fantasy in Itadaki Street
...
The hack only fix the HW renderer but not the SW renderer. However I'm not sure
the issue is from GSdx.
The hack will disable alpha test that used to generate empty draw call.
2016-09-04 19:41:31 +02:00
bb50b3419e
Merge pull request #1542 from PCSX2/gsdx-texture-transfer-motocross
...
gsdx: save the blit buffer register when a transfer is started
2016-09-04 16:55:08 +02:00
dc874a99cd
LilyPad: Remove useless self assignment
...
CID 146888 (#1 of 1): Self assignment (NO_EFFECT)self_assign: Assignment
operation (this->devices[i]->virtualControls + j).uid =
(this->devices[i]->virtualControls + j).uid has no effect.
2016-09-03 20:29:46 +05:30
52a2bb5524
gsdx ogl: disable texture shuffle when a render a basic sprite
...
Fix shadow issue on "Shadow of Memories"
2016-09-03 12:18:52 +02:00
79209c31bf
gsdx ogl: avoid bad logging of framebuffer/texture overlap
2016-09-03 12:18:51 +02:00
4d10eda308
Merge pull request #1545 from turtleli/cdvd-spti
...
cdvdgigaherz: Use SPTI to read raw CD sectors
2016-09-02 23:56:05 +01:00
a123e65185
gsdx sw: handle the invalidation of the palette when written by the GS
...
Manual gives all setup to upload a palette from the host. But nothing forbid to render
directly in the palette buffer. (GS rule nb 1, there is no rule ^^)
Fix Virtua Fighter 2 dark colors
However I'm not sure we can fix HW renderer. Rendering is done on the GPU but palette
handling is done on the CPU... So we need to read back data (ouch, and slow). A quick
test didn't get the expected results. Potentially there are others bugs (aka not gonna
happen on the HW renderer)
2016-09-03 00:21:56 +02:00
d01194da0b
gsdx sw: help debug
...
* quick way to disable verbose fixed tex0
* use palette address/format when the palette is dumped :)
2016-09-03 00:10:23 +02:00
6323268f40
gsdx tc: reset dirty alpha flag when we lookup a frame
...
Fix black skin regression for haunting ground (at least on my gs dump)
2016-09-02 21:31:13 +02:00
3d8be787a2
cdvdgigaherz: Use SPTI to read raw CD sectors
...
IOCTL_CDROM_RAW_READ apparently does not work for some read modes on
some optical drives, which makes some CD-ROM games unplayable from the
disc.
Work around the issue by using SPTI to retrieve the raw sector data. The
old reading method has been retained in case SPTI cannot be used (if the
device could not be opened with write access).
2016-09-02 00:58:38 +01:00
c9a1558c60
gsdx: save the blit buffer register when a transfer is started
...
Fix motocross mania missing texture. Close #1319
As far as I understand, transfer is initialized in DIR. But the real
write only occured later so the blit buffer could have been overwritten
by a new value.
BLIT 0 13700
TREG 40 40
DIR 0 0
BLIT 0 13f00 <=== the bad guy
Write! ... => 0x3f00 W:1 F:C_32 (DIR 00), dPos(0 0) size(64 64)
v2: set a value in m_tr.m_blit for load state
2016-09-01 09:59:38 +02:00
b546d096bd
Finally AMD delivered the fix to support separate shader object !!!
...
v2: blacklist AMD driver from the start of 2016
Please note that it is highly recommended to upgrade to a stable&working driver
2016-09-01 09:47:57 +02:00
448fee76c1
gsdx ogl: move GS setup in SetupIA
...
Fix regression when geometry shader is disabled
2016-09-01 09:47:46 +02:00
165bcf5662
Merge pull request #1539 from FlatOutPS2/DX
...
GSdx DX: extend ATE to better support additional corner case DX port
2016-08-29 11:39:22 +02:00
19a9d639b1
Merge pull request #1538 from PCSX2/gsdx-improved-ate
...
gsdx ogl: extend ATE to better support additional corner case (issue …
2016-08-29 11:38:57 +02:00
da688114f4
Merge pull request #1522 from PCSX2/gsdx-issue-1438
...
gsdx tc: don't partially invalidate small target
2016-08-28 16:51:25 +02:00
e4337b6631
glsl2h: add input files in the header
...
Close #1404
2016-08-28 16:31:35 +02:00
a1cdf7189a
gsdx tc: don't partially invalidate small target
...
It creates a regression on game that uses a small temporary target to
upload textures of various sizes. Inital code was done to handle direct
frame write (background, FMV) so big target
2016-08-28 16:24:02 +02:00
e5c6b2e952
GSdx DX: extend ATE to better support additional corner case DX port
...
Port for Direct3D renderers of PR #1538 .
2016-08-28 15:13:15 +02:00
7103707aeb
gsdx: new linux option linear_present
...
Purpose is to control the filtering when final image is displayed on the screen
Could improve the sharpness of the output in some games (ofc, it will be pixelated)
2016-08-27 19:23:12 +02:00
2b925e0103
gsdx ogl: extend ATE to better support additional corner case (issue #1499 )
...
When depth primitive is constant and depth test is greater or equal, we can
execute the depth write after color (depth status will only depends on the initial
value)
New case for RGB_ONLY ate:
If the blending equation uses a fixed alpha or a source alpha. We can postpone the alpha write
in a 2nd pass.
If depth can also be postponed, we can guarantee the order of correctness of the value.
1st pass => do RGB
2nd pass => do Alpha & Depth
It fixed Stuntman letter rendering :) Remaining of the game is still broken :(
2016-08-27 14:46:10 +02:00
b6693c4345
gsdx dx/gl: fix depth optimization
...
4th bit is the fog value, not the depth
2016-08-27 13:57:39 +02:00
411a25b610
Merge pull request #1531 from PCSX2/clang-tidy-empty-instead-of-size
...
pcsx2|common|gsdx: use empty() instead of .size() ==/!= 0 check
2016-08-26 10:05:01 +02:00
601c828562
Merge pull request #1530 from PCSX2/clang-format-plugin-v1
...
Clang format plugin v1
2016-08-26 10:04:52 +02:00
5a1cb00a07
Merge pull request #1517 from FlatOutPS2/DX
...
Gsdx alpha test improvement DX
2016-08-25 09:25:19 +02:00
eb18a2ac0f
PADnull reformat
2016-08-25 00:16:29 +02:00
6613862aed
CDVDnull reformat
2016-08-25 00:16:25 +02:00
25b0b63216
GSnull reformat
2016-08-25 00:16:21 +02:00
e61d14168a
dev9null reformat
2016-08-25 00:16:15 +02:00
e3a2ad03bc
SPU2null reformat
2016-08-25 00:16:11 +02:00
67e7d63f0f
FWnull reformat
2016-08-25 00:16:07 +02:00
b246d13bae
USBnull reformat
2016-08-25 00:16:00 +02:00
1fb2c66a21
gsdx ogl: Unscale line
...
Line thickness will be increased to N pixels (N is the upscaling factor).
Code will also be enabled by UserHacks_unscale_point_line = 1
2016-08-22 18:18:12 +02:00
018895067b
gsdx ogl: restore code to unscale point
...
enabled by UserHacks_unscale_point_line = 1
Point will be transformed into a NxN square sprite. (N is the upscaling factor)
2016-08-22 18:18:12 +02:00
1a8825b374
pcsx2|common|gsdx: use empty() instead of .size() ==/!= 0 check
...
Enhance readability reported by clang tidy
2016-08-21 17:20:13 +02:00
8ee2d3d367
gsdx: use static assert when possible
...
reported by clang tidy
2016-08-21 15:22:09 +02:00
2b2042e1c2
gsdx: Allow screenshot compression level to be changed
...
At higher resolutions it takes too much time to save a screenshot at the
maximum compression level. So let's allow the user to set the
compression level.
This re-uses the png_compression_level setting. The default compression
level is 1 for speed, but if the user wishes to increase the compression
level (without using an external tool) and doesn't mind if the
screenshot takes more time to save then they can increase the
compression level up to a maximum of 9 (which can take quite a while).
Fixes #1527 .
2016-08-20 14:01:24 +01:00
Gregory Hainaut