runion/rempty/rinter requires x < z and y < w
Help issue #762 (accurate blending issue)
If you want to shine, please put better GSVector code (AVX512 is 2 instruction :p)
In the DATE42 algo, first pass must find the primitive that write the
bad alpha value. If depth test is fail, alpha value won't be written therefore
you mustn't keep the primitive id.
In theory to ensure 100% correctness, depth would need to be fully executed
(currently depth write is disabled). However it requires to copy the depth buffer.
It is likely bad for the perf.
Issue reported on DBZInfWorld
Function pointer was mangled to avoid any collision. Nowadays all symbols
are hidden so no risk of collision.
Syntax is nicer beside it would allow to put back GLES3.2. I think it
supports most of the used extension.
glActiveTexture & glBlendColor are provided without symbol query.
CID 146834 (#2-1 of 2): Division or modulo by zero (DIVIDE_BY_ZERO)9. divide_by_zero: In expression tpf * 10000ULL / ttpf, division by expression ttpf which may be zero has undefined behavior.
CID 146839 (#1 of 1): Explicit null dereferenced (FORWARD_NULL)11. var_deref_model: Passing null pointer fb_pages to UsePages, which dereferences it.
CID 146840 (#1 of 1): Explicit null dereferenced (FORWARD_NULL)11. var_deref_model: Passing null pointer zb_pages to UsePages, which dereferences it.
* Prevent a potential null pointer deference in ```void GSRendererSW::UsePages()```
+ Isolate every SDL code paths and replace any call to them by call to a generic class "GamePad" of which JoystickInfo is now a child.
+ Now backends can be added by inheriting GamePad generic class.
+ There is just one function change which is redundant with next commits but otherwise commit will not compile(which is more evil).
+ Objectify conf class.
+ Make some members private as they need to have their range checked before being set
+ Change "options" variables into an union contraining bitfield representation of it. Allows to make code more expressive/readable.
CID 147046 (#1 of 1): Useless call (USELESS_CALL)
side_effect_free: Calling ApplyVolume(Ext, Cores[1].ExtVol) is only useful for its return value, which is ignored.
Disable and overrides the following hacks at the config and dialog:
- Disable screensaver
- Safe fullscreen exit on escape
- save state in title
All of those are hacks which PCSX2 doesn't need anymore and therefore are just
confusing if enabled.
Note that we assume PCSX2 is synonym for PS2 mode in LilyPad, and while AFAIK it
is the case now, it might need a more fine grained override system.
All combobox text can now be seen in full without having to click on the
combobox.
The internal and custom resolution stuff has been moved into the Hardware
Mode Settings groupbox since it doesn't affect software mode.
The dialog has also been rearranged a bit.
shaders/GSdx.fx is now the default location and is no longer hardcoded.
The external shader and external shader config can now be selected. (The
OpenGL renderer already has this feature.)
Note: It is still possible to not use a config file, just use an invalid
value for shaderfx_conf.
Don't use D3DX compile from file and compile from resource functions -
use the compile from memory function instead. It does the same thing,
except you have to set things up yourself.
Benefits:
Allows external shaders to be split into a config file and a shader file
without hardcoding the config file name.
Less code.
Yes, I more or less used the same message as the dx11 one.
Don't use D3DX compile from file and compile from resource functions -
use the compile from memory function instead. It does the same thing,
except you have to set things up yourself.
Benefits:
Easier move to D3DCompile when it becomes necessary.
Allows external shaders to be split into a config file and a shader
file without hardcoding the config file name.
Less code.
OpenGL does not use the cdecl calling convention (which is the default
calling convention for GSdx on Windows). Since DebugOutputToFile is used
by OpenGL, it needs to use the same calling convention that OpenGL uses.
This fixes a debug build crash when the OpenGL renderers are used and
debug_opengl is nonzero in the ini.
A couple of useless members were removed too.
Also fix wnd initialization
Coverity:
CID 146955 (#1 of 1): Uninitialized pointer read (UNINIT)
18. uninit_use: Using uninitialized value wnd[i].
Coverity:
CID 146816 (#1 of 1): Calling risky function (DC.STREAM_BUFFER)
dont_call: fscanf(FILE *, char const *, ...) assumes an arbitrarily large string, so callers must use correct precision specifiers or never use fscanf(FILE *, char const *, ...)
Without this patch, if a user initiates a recording and then cancels at the GSdx
dialog, the audio was recording anyway, which is probably highly unexpected.
However, while probably highly unexpected, it could still be useful to record
only audio, but with this patch it's now impossible.
We can reconsider if it turns out that people are actually using this "feature",
though one might as well set the video setting to be very unobtrusive (very low
resolution/bitrate) such that it uses very little CPU.
This is the internal resolution which GSdx uses and recording at this resolution
is optimal, i.e. without any dumb scaling, with all relevant pixels and without
redundant pixels.
The resulting clip still doesn't have the correct aspect ratio set, but that's
just a property which can be set to the clip afterwards, which is where the DAR
becomes useful. Since it's usually anamorphic, when muxing later with the audio
use the DAR to set the playback aspect ratio.
gsdx changes:
Remove native resolution checkbox from GUI and rework associated code
Small changes to Windows and Linux GUI
Support 8x native resolution
Fix custom resolution width less than native width use case
Previously it was saving the display name to the config but trying to restore
according to the friendly name.
Now store and restore according to the "displayName" which is more unique than
"friendlyName" since it includes GUID[s], and handle it consistently as _bstr_t.
This fixes the following issues when custom resolution is selected.
- When the width is smaller than the native resolution width, the
texture cache targets are removed on every Vsync signal, causing a
black screen issue.
- The texture cache code needs a 1 returned for the custom resolution
upscale multiplier or there'll be some really funny graphical issues.
It also removes unnecessary GetConfig (which I think unconditionally
does a a file read on Windows) calls if the width was increased - the
upscale multiplier is already stored, and the custom resolution width
and height calls are now unnecessary.
Also fix some whitespace issues.
Before this patch, when recording Progressive (frame) mode, it recorded all
the frames correctly but set the clip's fps property to 25/29.97, so when
played back it played at half the speed (but was fine when played at double speed).
This patch does not affect the number of frames recorded per second, but rather
only sets the resulting clip fps property to the correct one (double than before).
Also fixes a bug that in a non-managed window in progressive mode, the title
displayed "200%" speed when it should have displayed 100% speed.
Fixes#832
upscale_multiplier function values have been changed to allocate native resolution and also move custom resolution to 9.
Remove the old native checkbox value and include Native in the combo box.
Internal GSDX functions have also been updated with this new update to the upscale_multiplier variable.
* Greatly reduce the number of clut read (factor 10x)
* Avoid to get wrong TEXA texture in the cache.
* Fix "jump depends on uninitialized variable" Valgrind warning.
Fix#748
I try my best to avoid any breakage of DX but please test it too.
* add lengthly comment to explain the format
* Likely reduce the number of shader permutation
* Avoid slow AEM (on GPU)
Expect regressions because TC needs some fixes
v2: fix palette mode
CID 146833 (#2-1 of 2): Division or modulo by zero (DIVIDE_BY_ZERO)
divide_by_zero: In expression this->m_width / this->m_upscale_multiplier, division by expression this->m_upscale_multiplier which may be zero has undefined behavior.
CID 146835 (#1 of 1): Division or modulo by float zero (DIVIDE_BY_ZERO)
50. divide_by_zero: In expression (float)(end - start) / (float)frame_number, division by expression frame_number which may be zero has undefined behavior
Add 2 new shaders:
* ps_main12: cast a 16 bit depth to a RGB5A1 color
* ps_main16: cast a a RGB5A1 color to a 16 bit depth
Shader might be used in future commit as it seems Silent Hill uses this
kind of format.
Fix tab/indentation too
Add tooltips to Windows GUI. Fixes#578.
Rearrange Window GSdx GUI a bit.
Reformat tooltip descriptions to be both Linux and Windows (un)friendly.
Add new tooltip descriptions.
Fix Windows Lilypad local volume control GUI checkbox.
Make MicroVU E-bit delay slot warning a Dev warning.
Don't minimise GS Window if main window is minimised.
For Linux and Windows, add tooltip descriptions for AF, AA1, extra
rendering threads, Enable Shade Boost, FX Shader/External Shader, FXAA.
For Windows, also add Alpha Correction and Logarithmic Z tooltips.
For Linux, add software mipmap tooltip.
Thanks to tsunami2311, ssakash, gregory38 and whoever did the wiki for
helping with descriptions.
The hack description box messages were replaced by tooltips on Windows,
so there is no need for the first line in the description to refer to
the hack anymore.
3-state checkboxes were also converted to comboboxes, so remove any
references to checkbox states.
Reformat the descriptions so it looks okay on both Windows and Linux.
Could be better, but I'm out of ideas.
Also fix a few typos and missing punctuation.
Changes the three-state checkboxes to comboboxes.
Removes the hack description box.
Hides Alpha and Alpha Stencil when OpenGL is selected.
Rearranges the hacks dialog.
This moves the hardware, non-renderer dependent options to the top and
makes the renderer options visible only when it affects the current
renderer.
The texture filtering checkbox has been changed to a combobox and now
uses the same description as Linux does.
Also changes the Title to GSdx Settings.
The purpose is to avoid issue on MS-Intel driver without
a dedicated hack in the compilation.
Code doesn't use it so I suspect others implement to discard the
statement.
The CRC hack option is always used regardless of whether the HW Hack
checkbox is ticked. Move it to the main gsdx dialog and make it use the
same descriptions that are used in Linux.
And fix the accurate_blend_unit whitespace formatting.
It claimed to be 1.7.1 but it had a mixture from various
versions. It was hard to update as everything in the top directory
so I used upstream's way to organize files. I renamed include to
soundtouch since I did not want to #ifdef that for windows.
.
Wavfile.h is a private header so I used the private path instead of
moving the file over. This changed 3 files in the plugin folder.
according to some of the internal functions in GSDevice files, Anisotropic Filtering is only done when paltex is disabled. do the same on the GUI for user awareness.
Removes the checkbox of Anisotropic filtering from the GSDX plugin settings, the checkbox was usually used to enable & disable the AF which is not necessary since there is an option in the drop down list for disabling AF.
the internal function value of "AnisotropicFiltering" has been replaced with "MaxAnisotropy" for detection.
the detection uses the function getconfig("MaxAnisotropy", value) where value 0 means disabled and value is the default value when no value is set in the INI file.
I went a bit of trigger happy since compiling so much is not fun. Changes:
Solution
- Remove all SSE2/SSSE3/SSSE4/AVX/AVX2 configurations. Not used.
- Remove wxAdv3.0 and x86emitter. Compiled but not used.
- Make sure Release compiles Release.
- Make sure Debug compiles Debug.
- Make sure Devel compiles Release or Devel.
- Make sure nothing get skipped.
- Do the last 4 for the x64 build.
.
CDVDolio
- Remove SSE2/SSSE3/SSSE4/AVX/AVX2 configurations. Not used.
- Remove props. Cruft.
- Remove _M_SSE from stdafx.h. Pointless and only reference to it.
xpad
- Remove SSE2/SSSE3/SSSE4/AVX/AVX2 configurations. Not used.
- Remove props. Cruft.
- No reference to _M_SSE.
.
Only GSdx uses _M_SSE.
- Remove *.mo. Not needed.
- Add *.aps and delete USBqemu.aps.
- Don't ignore asm files.
- Ignore the cmake obj-i586-linux-gnu build folder in Linux.
- Fix the regex pattern for /bin/pcsx2*
- Don't ignore the changelog of libjpeg.
- portaudio line not needed and ignored vcxproj/props/etc.
- update to the new rcdefs.h location
- Don't ignore pcsx2/gui/Resources/EmbeddedImage.h
- Remove autogenerated file plugins/dev9ghzdrk/Win32/postBuild.cmd
- Simplify lines using '**' or '*.exe'.
Remaining issues:
$ git status --ignored
Ignored files:
plugins/CDVDiso/src/mkiso/mkiso.dsp
plugins/CDVDiso/src/mkiso/mkiso.dsw
.
These can be deleted.
It could not find dxguid.lib since it was only available for Release.
.
This should go on a prop but that is a different PR.
.
I also fixed it for x64 while I'm at it.
- zerospu2: include stdint.h in Windows. (VC2012+)
- CDVDolio: Remove hash_map (not used, VC2015+)
- zerogs: Fix extern and link to utilities. (VC2012+)
- zzogl: Port windows part to wx30. (VC2012+)
I: pcsx2: spelling-error-in-binary usr/lib/i386-linux-gnu/pcsx2/libGSdx-1.0.0.so allows to allows one to
I: pcsx2: spelling-error-in-binary usr/lib/i386-linux-gnu/pcsx2/libGSdx-1.0.0.so Allow to Allow one to
.
Apparently lintian checks grammar too (most common ones).
The Wild Arms Offset hack can only be on or off. There is no third
state. Convert the three-state checkbox into a two-state checkbox, fix
the description and remove a leftover.
Intially GSBlendStateOGL was an alias of the m_blendMapD3D9 array
The object was replaced by an index in the array. Save 2k of memory duplication.
And too much useless code.
v2: push/pop blending state in DATE stuff
v3: remove m_state which is useless now
I used to disable the RT but it doesn't work well with 50cents. It seems
texture writes weren't propagated correctly to the depth buffer. Besides
the game write an alpha value whereas depth is 24 bits only...
Commit message edited by Gregory.
Comment below from Jonathan Li
On my system, /dev/input/event13 (evdev interface) and /dev/input/js0 (joystick interface) correspond to the DS3 on my system. User/group ownership are both root.
With /dev/input/event13 at 0640 and /dev/input/js0 at 0644 - SDL2 detects no pad, SDL1 detects a 19 button, 27 axis pad
With /dev/input/event13 at 0666 and /dev/input/js0 at 0644 - Both SDL1 and SDL2 report a 19 button, 4 axis pad.
SDL2 only uses the evdev interface, SDL1 uses the evdev interface but if that fails, it uses the joystick interface.
The purpose is to emulate correctly destination alpha factor
An alpha channel of 128 is 1.0 in the GS but only ~0.5 in the GPU
I think few draw call use destination alpha so impact on perf must remains small.
Actually it can partially be done with GL_ARB_shader_image_load_store
extension. However all drivers that support shader_image have
texture barrier too.
The idea is to use a floating texture to accumulate the data and
then do a final postprocessing pass to apply the modulo
v2:
* use bounding box to
* fix vertex corruption issue
* use negative number in shader which allow to use half float (+12
fps@4x)
Previous CopyRect function does a memcopy without conversion.
This function will allow to use different format for input/output. Just a
possibility for the future
Basically the code does the alpha multiplication in the shader therefore
the blend unit only does a pure addition. This way the multiplication is
accurate and accurate_blending doesn't requires a costly barrier.
This code also avoid variable duplication to make the code more separated.
Hopefully blending can be done in a separated function
It is preliminary work to support fast color clipping with HDR
v2: fix assertion compilation failure
v3: fix regression in not accurate mode
v3: Cs * As/Af is not an accumulation
Those cases don't need the Cd addition and were already optimized anyway
Fix a regression on GoW2
Do DATE algo selection before blending. This way we can detect bad
interaction.
Regroup all blending/colclip in a single block. Avoid to check abe &&
rt multiple times.
v2: only enable sw blending when abe is true
The updated medium level will run for all sprites. It helps sotc blooming effect and it remains
fast enough to be enabled by default (at least on 3D games)
The new high level will run for all sprites + color clipping
The idea is that sprites are often use for post-processing effect (ofc except 2D games)
Most of the time post-processing supports SW blending with a small speed penality. SW
blending is more accurate so it is better to use it.
Sourceforge was dead for more than a week therefore add the license
information. I could not find the original TGM source (dead link) so I'm not
even sure if this still applies or if the glsl was totally rewritten. None
of the glsl files have a copyright header so it's hard to tell.
Gain: 1% at 4x on SotC (it partially compensates recent additions)
When the color is constant and equal to 128, the MODULATE mode is
equivalent to the DECAL mode. It saves 5 instructions on the FS.
Accurate options do a better jobs. Technically it can still
be useful for old gpu/driver that doesn't support the GL4.5 extension.
On Windows, you can still rely on Dx
On linux, free driver support it (except Intel)
It fixes the bad light on Silent Hill with the SW renderer.
Full story
if Q is NaN, m_vt.m_eq.q becomes wrongly true
/Q will wrongly be optimized in the "Vertex Shader" of the SW
Note: Add an assert for the STQ handler
Code path is quite hot so no need to add extra check for nothing
Gregory Hainaut