Makes all of the naming consistent with our code style, and makes
parameters match their header equivalents.
Essentially just a clean-up of things that weren't migrated over
already.
If either of the operands are signaling NaNs, then an invalid operation
exception needs to be indicated within the FPSCR.
This corrects SNaN flag setting for fmul, fmuls, ps_mul, ps_muls0, and
ps_muls1.
In old GCC versions, capturing 'this' does not work for some lambdas.
The workaround is to not use auto for the parameter (even though the
type is obvious). This can be dropped once we require GCC 7.
If the input is a signaling NaN, then we need to signal that via setting
the FPSCR.VXSNAN bit. We also shouldn't update the FPRF flags if
FPSCR.VE is set.
If the FPSCR.VE bit is set and an invalid operand is passed in, then the FPRF
shouldn't be updated. Similarly this is also the case when the FPSCR.ZE bit
is set and negative or positive zero is passed in as the operand.
If FPSCR.ZE is set and a divide by zero exception is signaled, then the
FPRF shouldn't be updated with a result. Similarly, if the input is an
SNaN and FPSCR.VE is set, then the FPRF shouldn't be updated.
The VX bit is intended to be a summary bit indicating the occurrence of
any kind of invalid operation. Therefore, whenever an invalid operation
exception is set, also set VX.
This corrects our CR flag setting for multiple instructions in certain
scenarios. This corrects flag setting cases in fadd, fadds, fctiw, fctiwz, fdiv,
frsp, frsqrte, fsub, and fsubs (and technically every floating-point
instruction that we make more accurate in the future with regards to
flag setting).
Coherent mappings have a lower overhead and less GL codes.
So enables coherent mapping by default for all drivers.
Both Qualcomm and ARM performs very bad with explicit flushing, so this change helps them as well.
AFAIK there was one GPU generation which was slower on coherent mapping: nvidia tesla
So Geforce 200 and 300 series should be tested with this PR before merging.
As this was last tested many years ago, this issue might have been fixed as well.
Those GPUs are close to 10 years old and not supported any more by nvidia.
This ports the Wii filesystem root, Wii SD card path and dump path
settings to the new config system (OnionConfig).
My initial plan was to wait until DolphinWX was removed before porting
most of the Main (Core, DSP, General) settings to onion config, but
I've decided to submit a small part of those changes to fix
[issue 10566](https://bugs.dolphin-emu.org/issues/10566).
Removes the need to manually set the FileUtil path in the UI frontends
and gets rid of some more members that don't really belong in SConfig.
Also fixes a bug which would cause the dump path not to get created
after change.
Only invoke config changed callbacks from Config::Save, not
Layer::Save. The latter results in callbacks being called
once per layer, up to 7 times per save.
These disc images are only used on dev units and not retail units.
There are two important differences compared to normal Wii disc images:
- The data starts 0x8000 bytes into each partition instead of 0x20000
- The data of a partition is stored unencrypted and contains no hashes
Our old implementation was just guesswork and doesn't work at all.
According to testing by GerbilSoft, this commit's implementation
is able to read and extract files in the filesystem correctly,
but the tested game still isn't able to boot. (It's thanks to their
info about unencrypted disc images that I was able to make this commit.)
Initialising Wii filesystem contents should be done after Boot and
not in HW to ensure that we operate with the correct title context
and to make sure required title directories exist (so that Movie and
Netplay code can copy data from and to the temporary NAND).
Previously, given cases such as 0x80000000 / 0xFFFFFFFF we'd incorrectly
set the destination register value to zero. If the dividend is negative,
then the destination should be set to -1 (0xFFFFFFFF), however if the
dividend is positive, then the destination should be set to 0.
Note that the 750CL documents state that:
"If an attempt is made to perform either of the divisions --
0x80000000 / -1 or <anything> / 0, then the contents of rD are
undefined, as are the contents of the LT, GT, and EQ bits of the CR0
field (if Rc = 1). In this case, if OE = 1 then OV is set."
So this is a particular behavior of the hardware itself.
D3D11 cannot handle block compressed textures where the first mip level
is not a multiple of the block size. The simple fix for texture pack
authors: leave these textures uncompressed. You can still use a .dds
container.
Executing a supervisor-level instruction in user mode is supposed to
cause a program exception to occur.
The following supervisor instructions are present:
- dcbi
- mfmsr
- mfspr
- mfsr
- mfsrin
- mtmsr
- mtspr
- mtsr
- mtsrin
- rfi
- tlbie
- tlbsync
In 0337ca116a checks within mfspr and
mtspr were added. This change adds the trivial checks to the other
instructions.
Using 8-bit integer math here lead to precision loss for depth copies,
which broke various effects in games, e.g. lens flare in MK:DD.
It's unlikely the console implements this as a floating-point multiply
(fixed-point perhaps), but since we have the float round trip in our
EFB2RAM shaders anyway, it's not going to make things any worse. If we
do rewrite our shaders to use integer math completely, then it might be
worth switching this conversion back to integers.
However, the range of the values (format) should be known, or we should
expand all values out to 24-bits first.
Keeps signed values out of bit arithmetic (not that there's any issues
that could arise from it in these situations, but it does look more
consistent, and silences compiler warnings)
Also ensure that all members of the class are initialized on
construction as well. Previously the bool indicating if options are
dirty wouldn't be initialized, which could be read uninitialized if an
instance was constructed and then IsDirty() is called.
Keeps all of the interpreter-specific exception handling functions
together in a reusable way across translation units, similar to
FPUtils.h for reusable floating-point functions.
Given this is a base class, we should clearly state what the parameters
to the functions in its exposed interface actually mean or represent.
This avoids needing to hunt for the definition of the functions in cpp
files.
While we're at it, normalize said parameter names so they follow our
naming guidelines.
There's no reason to use int here as opposed to an unsigned value.
Video_AccessEFB() takes its arguments as u32 values, so we'd be doing
sign conversions for no reason here (along with causing avoidable
compiler warnings).
If a program executing in user mode tries to write to any SPRs other than
XER, LR, or CTR registers, then a program exception occurs. Similarly
this also applies for reading SPRs as well, however the upper and lower
timebase halves can also be read (but not written to).
If HID0.NOOPTI is set, then dcbt and dcbtst are no-oped globally. We
currently don't perform data cache emulation, but we put this in anyway
so this detail isn't forgotten about if data cache emulation is
introduced at some point in the future.
This implements ES_VerifySign which is notably used by the system menu
when importing saves.
Now *all* ES commands that are actually used by titles are implemented.
- Move all of the ec functions into the Common::ec namespace.
- Give the public functions better names and some usage information.
- Move all of the "elt" related functions into an "elt" class including
all of the arithmetic operations, so that the logic becomes clearer
and feels less like assembly.
This also makes it much more obvious what the parameters are, instead
of only using unsigned char* (which doesn't tell anything about what
the pointer is used for or the size).
- Similarly, add a new "Point" class and move point functions there.
Overload the arithmetic operators to make calculations easier to read
The loops relied on unsigned integer overflow, which is not immediately
obvious. Replace them with less clever variants that are clearer.
Also implement bn_compare using std::memcmp.
This function in both JITs is only ever called by passing the JIT's code
buffer into it. Given this is already accessible, since the functions
are part of the respective JIT class, we can just remove this parameter.
This also cleans up accesses with the new code buffer, as we don't need
to do janky looking dereference-then-index expressions.
This class effectively acted as a "discount vector", that would simply
allocate memory and then delete it in the destructor when it goes out of
scope.
We can just use a std::vector directly to reduce this boilerplate.
ImportTitleDone only checks if all required contents have been imported
for system titles.
This fixes the system menu not being able to recreate title directories
to copy a save back to the NAND by using title import functionality.
Given this is a bitmask, we should be using an unsigned type to store it
(especially given it's outside the range an int can represent properly
without being considered negative).
No behavior change is caused by this, it just silences a sign conversion
warning.
Because it wasn't parented properly, it would show briefly the widget in its own window when creating an ARCodeWidget or a GeckoCodeWidget which would occur when accessing the game properties page or when the state changes to pause/running.
PowerPC.h at this point is pretty much a general glob of stuff, and it's
unfortunate, since it means pulling in a lot of unrelated header
dependencies and a bunch of other things that don't need to be seen by
things that just want to read memory.
Breaking this out into its own header keeps all the MMU-related stuff
together and also limits the amount of header dependencies being
included (the primary motivation for this being the former reason).
This fixes 2 crashes with the pause function. One is when spamming the pause hotkey and the other is to press pause and step hotkeys at the same time. It does disable the screensaver getting disabled when the emulator is running, but paused, though, a better solution would have to be done without introducing these crashes.
Github didn't detect conflicts here, however, since the float handling
functions were moved into the Common namespace, this would cause a build
failure.
Ideally none of these macros would exist (long-term goal), however in
the meantime at least make sure expressions always evaluate correctly
(thankfully no current usages rely on this).
Given we're operating with flags and bit representations, lets avoid
signed values here. It lessens the amount of sign conversion warnings
and lessens the amount of things to think about screwing you over when
making changes to the interpreter among other things.
These can be expressed in a slightly cleaner manner without so many
casts. While we're at it, also get rid of unnecessary indexing (we
already have the result nearby).
Extracts the self-contained code into its own function to clean up the
flow of Jit() a little more.
This also introduces a helper function to HLE.h that will be used to
reduce the boilerplate here and in the interpreter and Jit64 in the
following commits.
This function performs all of the preliminary checks required prior to
attempting to hook/replace a function at a given address. The function then
calls a provided object that satisfies the FunctionObject concept in the
C++ standard library. This can be a lambda, a regular function pointer,
an object with an overloaded function call operator, etc. The only
requirement is that the function return a bool, indicating whether or
not the function was replaced, and that it can take parameters in the
form: fn(u32 function, HLE::HookType type)
Gets rid of a second pair of ifdefs in the constructor. This also makes
sure the fd on Unix/BSD platforms is uniformly initialized. Previously
fd would be in an inconsistent state on FreeBSD or OpenBSD due to the
BSD OS checks not being present in the #elif within the constructor.
Previously, the entirety of CEXIETHERNET was exposed publically, which
wasn't necessary. We simply make the thread function part of the
internal interface, which gives it access to internal data members,
while keeping everything else outside of it.
Given these HLE classes inherit from a common base with a virtual
destructor, override is more appropriate here, as virtual propagates to
these destructors anyway.
This is also safer. If the base class' destructor is ever made
non-virtual, then these classes will cause a compilation error if they
aren't taken into account, as they'd be overriding a non-virtual
function (the destructor).
This is to avoid several issue with using 2 actions and switching between them. This commit will instead have one action get his property changed on pause and play.
Paired single (ps) instructions can call asm_routines that try to update
PowerPC::ppcState.pc. At the time the asm_routine is built, emulation has
not started and the PC is invalid (0). If the ps instruction causes an
exception (e.g. DSI), SRR0 gets clobbered with the invalid PC.
This change makes the relevant ps instructions store PC before calling out
to asm_routines, and prevents the asm_routine from trying to store PC
itself.
Moves the codebuffer access variables closer to their first use, and
gets rid of multiple indexing expressions. We already know which op
we're accessing in particular, so just make a reference to it and access
it instead of duplicating the expression all over the place.
A call like ReplaceAddress(address, 0) is pretty ambiguous; so is
ReplaceAddress(address, false), so use an enum class that tells people
straight-up what the replacer is.
This also gets rid of the really weird naming, where if 'blr' is true,
we'd be replacing the address with a NOP, rather than an actual BLR
instruction, so we invert that so it actually makes sense. There's no
actual bug fixed here though, considering the OnInsert functions
specified the correct values; it's literally just weird naming.
Without this macro, if any signals or slots were attempted to be used,
they wouldn't work; neither would various other features of the Qt
meta-object system. This can also lead to weird behavior in other
circumstances. Qt's documentation specifically states:
"Therefore, we strongly recommend that all subclasses of QObject use the
Q_OBJECT macro regardless of whether or not they actually use signals,
slots, and properties."
on its page for "The Meta-Object System", which can be seen here:
https://doc.qt.io/qt-5/metaobjects.html
Let's opt for "always do the right thing", and keep the code extensible
for the future and not have random things blow up on us.
Makes the enum strongly typed. A function for retrieving the string
representation of the enum is also added, which allows hiding the array
that contains all of the strings from view (i.e. we operate on the API,
not the exposed internals). This also allows us to bounds check any
querying for the strings.
Export and ExportAll now open a directory picker (that defaults to the
previous default directory, i.e. the Dolphin user dir).
Also removes the need to return the path in the export functions since
the user knows which path they chose.
This moves the result dialogs to DolphinQt2, since WiiSave should not
really be responsible for interacting with the user as a simple
Wii save importing/exporting class.
This also fixes Wii save import/export showing result dialogs twice,
once from WiiSave, and another time from DolphinQt2.
Move the import/export operation into separate functions, as it doesn't
really make sense for the constructor to do *everything*, including
printing success/failure message boxes.
The existing constructor was split into two: one that takes a path,
and another taking a title ID. This makes it more obvious what is
actually done when a path/TID is passed and also clarifies what
parameters should be passed. (No more magic 0 or "" value.)
It only needs to be updated when we changes the symbols, not every time the code widget updates and it does take a while to update them so this fixes some delay when updating the code window.
Putting the columns to resizeToContents causes way too much resizes per updates which can cause severe lags and even crashes. This only does one resize at the end of the columns.
One, which was also possible in Wx is to add an mbp after the core stopped which shouldn't be possible as it needs to add the memcheck on the core thread which wouldn't be running. The other fix is Qt specific where it doesn't clear the breakpoints on stop.
The items were editable while you cannot edit the breakpoints at the moment and the last breakpoint deleted would not cause the row count to change to 0.
This allows avoiding two copies of the executable data being created in
the following scenario (using pseudocode):
some_function()
{
std::vector<u8> data = ...;
DolReader reader{data};
...
}
In this scenario, if we only use the data for passing it to DolReader,
then we have to perform a copy, as the constructor takes the std::vector
as a constant reference -- you cannot move from a constant reference,
and so we copy data into the DolReader, and perform another copy in the
constructor itself when assigning the data to the m_bytes member
variable. However, we can do better.
Now, the following is allowable as well:
some_function()
{
std::vector<u8> data = ...;
DolReader reader{std::move(data)};
...
}
and now we perform no copy at any point in the reader's construction, as
we just std::move the data all the way through to m_bytes.
In the case where we *do* want to keep the executable data around after
constructing the reader, then we can just pass the vector without
std::move-ing it, and we only perform a copy once (as we'll std::move
said copy into m_bytes). Therefore, we get a more flexible interface
resource-wise out of it.
Not only it colors the entire row instead of just the address, but if the pc is the selected row, the pc color will overwrite the selection, this is done via a stylesheet.
This commit makes the colors hardcoded except when there is no symbols loaded, in which case, it uses the theme colors, except for the PC which is hardcoded to black on green. This makes a compromise between making use of the corespoinding theme color and the text being nicely readable on all themes.
This aligns the values to the right since It looks odd to be aligned to the left with any format other than hexadecimal. It also sets the font tot he debugger font and disallow selection as a previous commit made the selection pointless since it now relies on the current item.
It seemed impossible to SELECT an item, however, when right clicking, the CURRENT item is set to the appropriate cell, this commit makes the view use thta cell instead of the first selected one.
This makes it possible to use enums as the config type.
Default values are now clearer and there's no need for casts
when calling Config::Get/Set anymore.
In order to add support for enums, the common code was updated to
handle enums by using the underlying type when loading/saving settings.
A copy constructor is also provided for conversions from
`ConfigInfo<Enum>` to `ConfigInfo<underlying_type<Enum>>`
so that enum settings can still easily work with code that doesn't care
about the actual enum values (like Graphics{Choice,Radio} in DolphinQt2
which only treat the setting as an integer).
Dolphin doesn't use any of the WC24 files, so this can be done when
actually starting emulation in WiiRoot. The benefit of moving the
copy is that we don't need to handle temporary NANDs in a special way.
{Initialize,Shutdown}WiiRoot should only be responsible for setting the
SESSION_WII_ROOT or managing the temporary NAND directory.
Move all the content manipulation out of these functions to ensure
separation of concerns and call them after/before WiiRoot init/shutdown
to make sure they operate on the correct root.
If we don't flush the values, they persist in the register cache,
potentially resulting in the values being out of sync with PPCSTATE.
This was causing random crashes in games, mainly booting, when certain
JIT instructions were disabled, or forced to fall back to interpreter.
This excludes the second argument from template deduction.
Otherwise, it is required to manually cast the second argument to
the ConfigInfo type (because implicit conversions won't work).
e.g. to set the value for a ConfigInfo<std::string> from a string
literal, you'd need a ugly `std::string("yourstring")`.
This can be considered a hack, but it essentially neuter the bias applied on boot for both console on the RTC. This avoids having the time on boot be changes significantly while the user would want a specific RTC and it also avoids possible underflow of the RTC if it is near the epoch.
GetHandle() should really not even be part of IOFile's interface, but
since it is (for the time being), we can cull unnecessary usages of it.
In this case, the WriteBytes() function does what we need without using
the underlying handle directly.
This allows getting rid of casts. We can also leverage std::min to allow
making relevant variables const. Also make the "empty" table const to
allow it to be read-only.
Converts them from 0 == success, 1 == failure to using the built-in
standard bool. Also while we're at it, const qualify write_sector's
"sector" parameter, since nothing in the function modifies the data
being pointed to.
Avoids needing to iterate and append the characters in one case. This also
alters the function to not need to construct a temporary std::string
(QString's toUtf8() is sufficient, as QByteArray exposes iterators).
toStdString() is equivalent to retrieving the QString's underlying
QByteArray via calling QString's .toUtf8 member function and then
calling .toStdString() on the result of it (discarding the QByteArray
afterwords), so this just trims off an unnecessary step in the process.
This is also somewhat more indicative of the conversions going on:
toStdString() converts the underlying character sequence of a
QString to UTF-8, not strict ASCII, so we're really using a superset of
ASCII.
Also move it to MathUtils where it belongs with the rest of the
power-of-two functions. This gets rid of pollution of the current scope
of any translation unit with b<value> macros that aren't intended to be
used directly.
Change SettingsHandler to take a buffer instead of assuming that the
setting file to read is always on the host filesystem for more
flexibility and make it possible to use the new filesystem interface.
Given bit conversions between types are quite common in emulation
(particularly when it comes to floating-point among other things) it
makes sense to provide a utility function that keeps all the boilerplate
contained; especially considering it makes it harder to accidentally
misuse std::memcpy (such as accidentally transposing arguments, etc).
Another benefit of this function is that it doesn't require separating
declarations from assignments, allowing variables to be declared const.
This makes the scenario of of uninitialized variables being used less
likely to occur.
Keeps them all next to each other and deduplicates a few constants,
notably the PPC UIDs. Apparently I forgot that I already added them
for SetupStreamKey.
As of VS 15.7, these seem to have been removed. Given we shouldn't have
been using these for some time, just replace them with the standard
library equivalent.
This fixes building on Windows with VS 15.7
It was off by about 8 years because it was actually the same as the GC epoch, however, the reason it worked all this time was because the default RTC counter bias of the Wii was not 0, but a value that is about 8 years in seconds. This broke custom RTC as a custom RTC of the gc epoch was underflowing b ecause the wii epoch was thought to be much later.
The existing backend did not handle cases where the target exists
correctly.
This is a bug that has been around forever but was only recently
exposed when ES started to use our FS code.
Also adds some unit tests to make sure this won't get broken again.
Creating a file then opening it in read write mode is a pretty common
operation. This commit adds a helper function that makes it easier
to read and clearer.
spycrab