FindAllGamePaths may take a little while, and holding the
gameFileCache lock isn't actually necessary until it's time to
put the results returned by FindAllGamePaths into gameFileCache.
The downside of this change is that we have to do an extra
round of JNI in between FindAllGamePaths and Update,
but I don't think that's much of a problem.
SPDX standardizes how source code conveys its copyright and licensing
information. See https://spdx.github.io/spdx-spec/1-rationale/ . SPDX
tags are adopted in many large projects, including things like the Linux
kernel.
Back when I wrote this code, I believe I set it to use a custom path
so that the cache would end up in a directory which Android considers
to be a cache directory. But nowadays the directory which Dolphin's
C++ code considers to be the cache directory is such a directory,
so there's no longer any reason to override the default path.
Any local references get cleaned up when returning to the JVM,
but some of the functions in AndroidCommon return to C++ rather
than the JVM, and functions with loops risk running into the
limit of how many simultaneous local references are allowed.
The Java implementation of getting the list of post-processing
shaders only looked in the Sys folder and not the User folder.
This could be fixed in the Java implementation, but it's
simpler to just call the C++ implementation instead.
EmulationActivity has an instance of Settings. If you go to
SettingsActivity from EmulationActivity and change some settings,
the changes get saved to disk, but EmulationActivity's Settings
instance still contains the old settings in its map of all
settings (assuming the EmulationActivity was not killed by the
system to save memory). Then, once you're done playing your
game and exit EmulationActivity, EmulationActivity calls
Settings.saveSettings. This call to saveSettings first overwrites
the entire INI file with its map of all settings (which is
outdated) in order to save any legacy settings that have changed
(which they haven't, since the GUI doesn't let you change legacy
settings while a game is running). Then, it asks the new config
system to write the most up-to-date values available for non-legacy
settings, which should make all the settings be up-to-date again.
The problem here is that the new config system would skip writing
to disk if no settings changes had been made since the last time
we asked it to write to disk (i.e. since SettingsActivity exited).
NB: Calling Settings.loadSettings in EmulationActivity.onResume
is not a working solution. I assume this is because
SettingsActivity saves its settings in onStop and not onPause.
This is already handled by SurfaceDestroyed. In the worst case,
the extra code could even race with SurfaceDestroyed if they
are triggered at the same time, but this is highly improbable.
Time for yet another new iteration of working around the
"surface destruction during boot" problem...
This time, the strategy is to use a mutex in MainAndroid.cpp.
We generally have no reason to call these functions on our own, so
there's not much reason to declare them, especially not in the cpp
file where they're defined. In case we ever do get a reason to do
it, we can add declarations for just the functions that need them.
During emulation, when LocalGame has a value but CurrentRun
doesn't, we want to read from LocalGame, not CurrentRun. This
change exposes a LAYER_ACTIVE option that handles this correctly.
The main activity loads settings essentially as soon as it
starts, in order to determine which tab to show. If the process
of stopping emulation has not finished at this point, a race
condition may be triggered where two IOS kernels are created
at once due to the emulation thread loading or saving the
SYSCONF while the GUI thread is loading the SYSCONF. To fix
this, we can wait for emulation to fully end before returning.
Because this race condition is hard to reproduce, I have not
been able to test that this actually fixes the race condition,
or even that the cause of the race condition is exactly what I
believe it is. But I am relatively confident.
I was hoping we would be able to pull in the default values
from C++, but it seems like more trouble than it's worth,
partially because of different settings having default values
of different types and partially because we don't have any
convenient way to get a list of all C++ settings.
The functions with "UTF" in the name use "modified UTF-8" rather
than the standard UTF-8 which Dolphin uses, at least according
to Oracle's documentation, so it is incorrect for us to use them.
This change fixes the problem by converting between UTF-8 and
UTF-16 manually instead of letting JNI do it for us.
Currently, the touch controller overlay uses a square gate for
sticks. This commit changes that so that it instead uses the
stick gate configured in the INI, which ensures that the values
sent to the core are appropriately scaled regardless of what
is configured in the INI and makes the overlay look nicer
if the INI is set to a stick gate that matches the graphics.
The workaround was added in 0446a58.
The underlying problem is that we must not destroy the surface
while the video backend is initializing, otherwise the video
backend may reference nullptr.
I've also cleaned up the logic for when to destroy the surface.
Note that the comment in EmulationFragment.java about only being
able to destroy the surface when emulation is running is not true
anymore (due to de632fc, it seems like).
This feature was originally exclusive to the previous iteration of
DolphinQt (the one that was the reason for the current iteration
being named DolphinQt2 initially).
https://bugs.dolphin-emu.org/issues/8949
Much of our native code assumes that UICommon::Init has been called
(for reasons such as wanting to access the user's settings),
so not calling it until emulation start heavily limits what native
code we can use in the Android GUI (except during emulation).
We can use std::array and const char* to make these capable of fully
being stored in the read-only segment, and get rid of a few static
constructors (144 of them).
Avoids dragging in IniFile, EXI device and SI device headers in this header which is
quite widely used throughout the codebase.
This also uncovered a few cases where indirect inclusions were being
relied upon, which this also fixes.
This allows us to update the rich presence description if a channel
is launched from the Wii Menu. It also handles other PPC title
launches, e.g. Smash Bros. Masterpieces.
Host.h: Added Host_TitleChanged().
DolphinNoGUI/MainNoGUI.cpp: Implemented Host_TitleChanged().
DolphinQt/Host.cpp: Implemented Host_TitleChanged().
Android/jni/MainAndroid.cpp: Stubbed Host_TitleChanged().
DSPTool/StubHost.cpp: Stubbed Host_TitleChanged().
UnitTests/StubHost.cpp: Stubbed Host_TitleChanged().
The difference between Dolphin's game IDs and GameTDB's game IDs
is that GameTDB uses four characters for non-disc titles, whereas
Dolphin uses six characters for all titles.
This fixes:
- TitleDatabase considering Datel discs to be NHL Hitz 2002
- Gecko code downloading not working for discs with IDs starting with P
- Cover downloading mixing up discs with channels (e.g. Mario Kart Wii
and Mario Kart Channel) and making extra HTTP requests. (Android was
actually doing a better job at this than DolphinQt!)
This sets the IR/Width, IR/Height, and IR/Center per game, so a controller profile is used
to save the value, then enable the profile in the game ini, then reload the
control configs.
Previously would take several seconds to save, sometimes causing ANRs, which
was made worse when adding all the controller values. Now we only load/save
each section instead of doing it for each setting. Also added a method
to save an individual setting.
Two reasons for this change. First, it appears that some android launchers do some sort of call into
the application when long pressing the app icon, which in turn calls the DirectoryInit service. This
was ok to do prior to Oreo but will cause crashes with the new restrictions on services running
in the background. Which leads to the second reason that DirectoryInit doesn't need to be a service
at all since these actions are required for dolphin to function and shouldn't be a scheduled action.
So we instead just kick this off in a new thread and send the broadcast when done.
This global belongs in the JitOptions structure, as it's a conditional
setting (A.K.A. option) that changes the behavior of what the JIT does.
Plus it keeps the scope of the variable constrained to the general area
it's intended to be used and nothing further.
Added an option in General config to enable/disable usage statistics. Added a popup on first open if
the user would like to engage in reporting. Clicking cancel or out of the box opts out. Only
clicking 'Ok' will enable reporting. Also added a new android specific values to report.
Makes the enum values strongly-typed and prevents the identifiers from
polluting the PowerPC namespace. This also cleans up the parameters of
some functions where we were accepting an ambiguous int type and
expecting the correct values to be passed in.
Now those parameters accept a PowerPC::CPUCore type only, making it
immediately obvious which values should be passed in. It also turns out
we were storing these core types into other structures as plain ints,
which have also been corrected.
As this type is used directly with the configuration code, we need to
provide our own overloaded insertion (<<) and extraction (>>) operators
in order to make it compatible with it. These are fairly trivial to
implement, so there's no issue here.
A minor adjustment to TryParse() was required, as our generic function
was doing the following:
N tmp = 0;
which is problematic, as custom types may not be able to have that
assignment performed (e.g. strongly-typed enums), so we change this to:
N tmp;
which is sufficient, as the value is attempted to be initialized
immediately under that statement.
Deduplicates code, and gets rid of some problems the old code had
(such as: bad performance when calling native functions, only one
disc showing up for multi-disc games, Wii banners being low-res,
unnecessarily much effort being needed for adding more metadata).
Given this is actually a part of the Host interface, this should be
placed with it.
While we're at it, turn it into an enum class so that we don't dump its
contained values into the surrounding scope. We can also make
Host_Message take the enum type itself directly instead of taking a
general int value.
After this, it'll be trivial to divide out the rest of Common.h and
remove the header from the repository entirely
Modified NativeLibrary to display alerts in AlertDialogs rather than Toast notifications, and allow yes/no options.
Modified MainAndroid to use the new displayAlertMsg, and to return its output.
The Activity is responsible for just its views and menus and such. It
signals the Fragment via setGamePath, StartEmulation and StopEmulation.
The Fragment manages the actual emulation lifecycle. It is solely
responsible for calling the NativeLibrary lifecycle methods.
With this lifecycle simplification, the NativeLibrary no longer needs to
kill the Activity. It happens normally now.
This simplifies a lot of things, live handling rotation.
Ideally Common.h wouldn't be a header in the Common library, and instead be renamed to something else, like PlatformCompatibility.h or something, but even then, there's still some things in the header that don't really fall under that label
This moves the version strings out to their own version header that doesn't dump a bunch of other unrelated things into scope, like what Common.h was doing.
This also places them into the Common namespace, as opposed to letting them sit in the global namespace.
I don't know who thought it would be a good idea to put the Wiimote
connect code as part of the Host interface, and have that called
from both the UI code and the core. And then hack around it by having
"force connect" events whenever Host_ConnectWiimote is called
from the core...
Showing the Wii remote connection status leads to inconsistent UX,
because we don't do anything like that for GameCube controllers
or with Bluetooth passthrough.
It's also questionable how useful it is given that:
* it doesn't print the number of connected remotes, just that one
remote is connected, connecting or not connected, so the only info
it provides is actually wrong when using multiple remotes;
* this user-facing feature is actually broken in master and no one has
complained AFAIK, which means people don't really rely on it;
* the status bar isn't visible most of the time unless the user is
using render to main or deliberately keeping the main window's
status bar visible by moving the render window and they're not too
far away from their screen;
* emulated Wii remotes now reconnect on input, which means that there
is less of a need to actually know at all times whether a remote
is connected, since pressing any button will reconnect it and provide
immediate, visible feedback via OSD messages and the Wii remote
pointer appearing.
* Move out boot parameters to a separate struct, which is not part
of SConfig/ConfigManager because there is no reason for it to
be there.
* Move out file name parsing and constructing the appropriate params
from paths to a separate function that does that, and only that.
* For every different boot type we support, add a proper struct with
only the required parameters, with descriptive names and use
std::variant to only store what we need.
* Clean up the bHLE_BS2 stuff which made no sense sometimes. Now
instead of using bHLE_BS2 for two different things, both for storing
the user config setting and as a runtime boot parameter,
we simply replace the Disc boot params with BootParameters::IPL.
* Const correctness so it's clear what can or cannot update the config.
* Drop unused parameters and unneeded checks.
* Make a few checks a lot more concise. (Looking at you, extension
checks for disc images.)
* Remove a mildly terrible workaround where we needed to pass an empty
string in order to boot the GC IPL without any game inserted.
(Not required anymore thanks to std::variant and std::optional.)
The motivation for this are multiple: cleaning up and being able to add
support for booting an installed NAND title. Without this change, it'd
be pretty much impossible to implement that.
Also, using std::visit with std::variant makes the compiler do
additional type checks: now we're guaranteed that the boot code will
handle all boot types and no invalid boot type will be possible.
This file is pretty small now that it doesn't handle Wii
partitions anymore, so let's move its contents to Volume.cpp.
This is also more consistent with how blob creation works.
We can do this now that the x86-64 JIT supports PIE.
JITIL is deliberately excluded from the GUI because it
doesn't support PIE yet. (JITIL will be used if it's
set in the INI, though.)
This is needed because for some reason the WSI for NV Vulkan drivers
doesn't return VK_ERROR_OUT_OF_DATE_KHR, so there is no other way to know
that a resize has occured apart from polling, which is a poor solution for
X11 (since it is blocking).
At first there weren't many enums in Volume.h, but the number has been
growing, and I'm planning to add one more for regions. To not make
Volume.h too large, and to avoid needing to include Volume.h in code
that doesn't use volume objects, I'm moving the enums to a new file.
I'm also turning them into enum classes while I'm at it.
JosJuice