Left unselected, dolphin defaults to nstc-u and sets ntsc-j if the iso is japanese (old behavior).
Selected, ntsc-j is forced.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7580 8ced0084-cf51-0410-be5f-012b33b47a6e
changes fs getusage to return 1 additional inode to account for the directory itself
Fixes save creation for at least two games, R8XE52 (Jurassic: The Hunted), STEETR (Tetris Party Deluxe)
doesnt harm save creation in any games that i tested (about 25)
also it is now possible to boot a nand title by selecting the tmd file using File > Open
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7575 8ced0084-cf51-0410-be5f-012b33b47a6e
if you have a sysconf from r7568-this revision that was used for a wii game unfortunately it is corrupted, either delete it and start with a new one, or clear out the number of wiimotes in btdinf (change to 0) using a hex editor
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7571 8ced0084-cf51-0410-be5f-012b33b47a6e
when nand root is changed the current sysconf is saved,
and the sysconf in the new location is either loaded (if exists)
or the default sysconf is created
wii menu item is updated when the root changes
small fix to saving gamelist paths to .ini paths that are removed from the gui are now removed from the ini instead of simply changing the number of paths
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7555 8ced0084-cf51-0410-be5f-012b33b47a6e
GH5 Loads again
use the existing function instead of checking titleid each time a NANDLoader is needed
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7547 8ced0084-cf51-0410-be5f-012b33b47a6e
add ticket to CNANDContentLoader
move wad installer to CNANDContentManager
system menu can now be launched from a wad file without being installed first, (return to system menu from another title will still only work if system menu is installed)
cdb.vff: flushed to disc immediately, creates if the file exists but is too small, moved creation to Boot_WiiWad
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7530 8ced0084-cf51-0410-be5f-012b33b47a6e
we already copy the file to memory here, now we also copy the file to
1/2/data/
This should really fix issue 4287.
Thanks to hosigumayuugi for finding the exact cause of the issue
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7521 8ced0084-cf51-0410-be5f-012b33b47a6e
XGRA Extreme-G Racing Association/Conduit 2... Enabled 48kHz output for LLE (before it was just 32kHz). I hope it works, if there are serious problems, it will be reverted.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7511 8ced0084-cf51-0410-be5f-012b33b47a6e
Saving a state that is not recording over one that was will now delete the old recording. Fixes trying to record with the wrong savestate.
Fixed some compiler warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7505 8ced0084-cf51-0410-be5f-012b33b47a6e
(At least for Super Mario Sunshine, from whose ucode it was derived - hopefully this won't break other games.)
Fixes Issue 4437.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7504 8ced0084-cf51-0410-be5f-012b33b47a6e
fs::open does not need to create the data directory, es_diVerify does that.
change applied to CBoot::Boot_WiiWAD as well (es_diVerify isn't used for wads).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7503 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes sure they are below 2G on 64bit systems,
allowing us to continue using the simpler 32bit accesses.
Fixes issue 4357 and issue 4397.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7465 8ced0084-cf51-0410-be5f-012b33b47a6e
In assembly, these are 'ld $ax0.d,$ax1.r,@$arS with their n,m and nm variants,
which have been special cased for S==3. The regular 'ld can be decomposed
into lrri $ax0.d,@$arS and lrri $ax1.r,@$ar3, while the S==3 case decomposes
to lrri $axR.h,@$arD and lrri $axR.l,@$ar3. The latter variant will be
disassembled to 'ldax $axR,@$arD after this change. The assembler recognizes
both the new 'ldax variant and the old 'ld with @$ar3 but the disassembler
only outputs 'ldax. Besides the readability, this allows for more correct
register use analysis(when it's done).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7413 8ced0084-cf51-0410-be5f-012b33b47a6e
* LLE dspinit hax (demo disks, zelda collectors edition, ocarina of time working (again) with lle)
* LLE interpreter "DSPonThread" working again
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7409 8ced0084-cf51-0410-be5f-012b33b47a6e
Reading the instruction from memory at the given address and using that
as index in the opTable leads to more correct results than using the
address as index into opTable.
Also assert when trying to execute a bad instruction instead of crashing
without warning.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7384 8ced0084-cf51-0410-be5f-012b33b47a6e
A repeat count of zero still executed the instruction once. Fixes Zelda Ucode
audio crackling.
Fixes DSPLLE audio in: Luigi Mansion, Pikmin, Super Mario Galaxy,
Zelda CE, Zelda Four Swords, Zelda WW, Zelda TP.
(Thanks LM for testing)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7370 8ced0084-cf51-0410-be5f-012b33b47a6e
when off certain games like ZTP ZWW maybe other cannot save to a different memory card after loading from a savestate, but for TAS the game will no longer think that the card was ejected
to use add
ReloadMemcardOnState = false
to dolphin.ini
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7323 8ced0084-cf51-0410-be5f-012b33b47a6e
+ minor GUI adjustements, CPUID Detect cleanup... video profile selection is disabled if a game is running
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7302 8ced0084-cf51-0410-be5f-012b33b47a6e
Add the option to clear a title from the NANDContentLoader and attempt to reload it
This allows the using the system menu immediately after installing rather than requiring a relaunch
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7290 8ced0084-cf51-0410-be5f-012b33b47a6e
same hack as r7090
update ES_GETSTOREDTMDSIZE, ES_GETSTOREDTMD to work when called with only 1 inbuffer and no outbuffer
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7286 8ced0084-cf51-0410-be5f-012b33b47a6e
No speed difference, probably because our basic blocks are
too small to contain more than one access to any register
or used too seldom for multiple accesses to make a difference.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7260 8ced0084-cf51-0410-be5f-012b33b47a6e
Parent message alerts by the active window. This way if another window is open it isn't pushed behind the main window. We probably should parent the message alerts by the calling window instead, but this may be good enough.
Make sure there is only one instance of some modeless windows (Cheats Manager and Net Play).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7257 8ced0084-cf51-0410-be5f-012b33b47a6e
Was made possible by the move of Core/DSPCommon to Core/Core.
This should not give a significant speed difference, but frees
another register for register allocator use on x64 and
generally simplifies the code.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7252 8ced0084-cf51-0410-be5f-012b33b47a6e
Ticked = Clear sound but a bit unresponsive to controls
Filled = Same as r7225
Clear = Disable speaker
The option is in the Wii tab of the configuration.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7231 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added HLE function IsBusyStream which signals that the Wiimote is ready to accept speaker data. This function is not a conversion from the real PPC code. It a simple function that returns the "ready" status after being polled.
* Added code to find and patch HLE functions on boot
* Added 4bit Yamaha ADPCM decoder from the ffmpeg project
* Removed some test code
* Added some copyright notices
Fixes issue 438.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7225 8ced0084-cf51-0410-be5f-012b33b47a6e
connection establishment be done in the same thread, which caused
problems when the now persistent device connections could be
initiated by either opening the wiimote config dialog or starting
the emulation.
This same thread doesn't necessarily have to be the main (GUI)
thread, but it fits with the current other init case in the wiimote
config dialog and doing it in the main thread and would be required
if we should want to use the IOBluetoothUI framework in the future
for having the user input a pairing key for permanent syncing.
Also move a few other bits of code from the emu thread function
into Init() and Shutdown() so it only does those things that need
to be in that thread's context. I am not sure about video setup
so I have left that in EmuThread() for now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7188 8ced0084-cf51-0410-be5f-012b33b47a6e
- ReImplementing Single Core Mode like Dual Core Mode Style.
- Stage 1: My goal is, we have the Fifo, CommandProccessor code the more clear, maintenible and documented possible. When I quit dolphin I want any developer can continue with the work only reading the code.
* Big Refactoring: A lot of functions was changed the names, and modularized.
Now the FifoLoop and CatchUpGPU does not exist, was replaced by RunGpu() and RunGpuLoop().
The general idea is modeling the code like the real HW. The fifo is only a buffer where the Write Gather Pipe write the commands and from the Graphic Processor read these.
* Big Clean UP a lot of obsolete code and comments was deleted, like DcFakeWachDog, "Fifo very soon hack", etc.
In the stage 2, I will refactoring more code doing emphasis in the division of CommandProcessor, Fifo, Gpu Emulation. Beside I will comment all functions and variables in the code (Don't worry I will ask for English help for this part ;) )
Please test a lot SC mode and DC mode :)
Thank you so much for testing always and the patience. I don't like broke your favorite game but... you must believe me this part is very sensible, I only try to contribute for have a better and stable dolphin emulator.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7185 8ced0084-cf51-0410-be5f-012b33b47a6e
Changes:
* Allow events to be scheduled when the emulator is not running. This allows the save state event to be added before the emulator starts.
* Removed the Audio back-end init flag from the save state. This value should not be saved as it is not data relevant to guest machine.
* Allow a recording to be started at any time (apart from when a recording is already being made).
* Updated the status bar and title bar when an on-screen message is shown
* Removed the saving of PEToken from the save state as the FIFO will save this information
* Added a couple Pixel Engine interrupt states to the save state
* Added the copyright notice to the GCPadStatus.h file.
This function is preliminary. Let us know of any bugs you find or any UI quirks.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7175 8ced0084-cf51-0410-be5f-012b33b47a6e
- In the Command Processor Control Register when GPReadEnable is OFF, wait until the fifo lopp finish with thi actual 32 bytes block. This is necessary to have Safe Disabble GP Read in this way AbortFrame is performed by the software, beside this can help to have accurate GPReadEnable OFF.
Please test Metroid Prime 1/2, Guilty Gear XX, X men gc, SMG, and shuffle you can test Harry Potter Prince for WII. :)
PD: The fifo code need a clean very soon.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7158 8ced0084-cf51-0410-be5f-012b33b47a6e
* Better control over which Wiimotes save/load input from input files (general sync improvement).
* Wiimote save stores the ACLQ, allowing maintaining control across save/load (thanks to skid for the idea).
* Wiimote reconnect on save/load now an option - enabled by default to preserve present behaviour. Disabling this allows the above change to be effective.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7147 8ced0084-cf51-0410-be5f-012b33b47a6e
* Frame counter is restored properly post-load.
* "Read-only mode" menu option added. Currently this either causes the movie file to be closed at the end of playback (if enabled) or continues recording past end of playback (if disabled).
* Can now properly resume recording from a state saved during movie playback.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7142 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed Gamecube controllers being disconnected for a couple ingame seconds when loading a savestate with an input movie attatched.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7141 8ced0084-cf51-0410-be5f-012b33b47a6e
Update several of the other languages.
Fix those pesky DSPIntUtil.h compiler errors.
Clean up some remnants of building the plugins in the primary CMakeLists.txt file.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7127 8ced0084-cf51-0410-be5f-012b33b47a6e
I think that isFifoBusy bring better sync with VI (video interface) because the CPU emulated threads are waiting for DrawDone in BP Register. So, I do some modifications.
1) Rename "IsFifoBusy" by "isPossibleWaitingSetDrawDone"
2) Only activate isPossibleWaitingSetDrawDone when bFF_GPLinkEnable is true in fifo loop "Inmediate mode" that is because in theory this drawsync function is using in this mode.
3) Deactivate isPossibleWaitingSetDrawDone also in SetFinish in PixelEngine, beside when 32 block is finish.
Please regression in yours games thats can bring some FPS more above all with VPS frame limiter ON (Auto, 60, 50, etc).
- Fix waiting in AbortFrame(), please test mp1/mp2 is fixed again.
Good look!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7123 8ced0084-cf51-0410-be5f-012b33b47a6e
Move NetPlay code from DolphinWX to Core.
Even NetPlay with nowx should be possible now if anyone felt like implementing a CLI for it ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7119 8ced0084-cf51-0410-be5f-012b33b47a6e
buildfix
move much of the build settings to .props files
-please use them as much as possible in the future, instead of changing individual projects
NOTE: to avoid left over blobs, clean your builds *before* applying these changes.
TODO: add DebugFast target for projects that are lacking it. Lack of DebugFast targets cause the linker to use LTCG when we don't want it.
please test for regressions which could be caused by being too happy with compiler flags :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7109 8ced0084-cf51-0410-be5f-012b33b47a6e
problems, whole functions in .h files need to also be static in
case they are included in several .cpp files.
Also a few other minor LTO fixes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7082 8ced0084-cf51-0410-be5f-012b33b47a6e
and just operate on lists of object files instead.
This helps with LTO since LLVM/clang LTO is completely broken
by static libraries. It also helps identify symbol clashes
between components like the former plugins.
Many linkers also expect static libraries to form a strict DAG
which turns out be a difficult rule to uphold in practice,
especially since some of our platforms aren't picky about this.
LTO builds currently appears to crash at runtime because of
the static wx libs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7056 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix another minor issue with frame dumping.
Add the graphics config dialog button back to the main config.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7041 8ced0084-cf51-0410-be5f-012b33b47a6e
* Tightened the timing between the CPU and the DSP in thread mode so that it works closer to how the non-threaded mode works. The CPU now waits for all of the DSP cycles to be exhausted before adding more cycles.
* DSP Idle skipping has been disabled as it messes up the timing when it is running in a thread.
* Checked for external interrupt requests before entering the dispatcher and inside the dispatcher loop
* Added a critical section around the mailbox read high function
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7040 8ced0084-cf51-0410-be5f-012b33b47a6e
fix all build targets (they've all built here - you may have to manually delete the intermediate directories if you have conflicts after this commit).
set the debug path to $(TargetDir)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7022 8ced0084-cf51-0410-be5f-012b33b47a6e
Added SSE optimizations to JIT LLE, up to 136% speedup observed in Resident Evil games.
Rewrote the GUI to make it more user friendly, added a User friendly Setup.
Also Billiard please: learn to merge.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7000 8ced0084-cf51-0410-be5f-012b33b47a6e
Properly pause the core when saving/loading savestates, previously we used PowerPC::Pause() and Start() which only update the state but doesn't properly set m_StepEvent and caused random hangs.
Fixed hang when creating a savestate while the game was paused or in Frame Advance mode, now the thing works (just remember to press play duh).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6992 8ced0084-cf51-0410-be5f-012b33b47a6e
and use wxGetKeyState on platforms other than Windows.
I am not sure if wxGetKeyState is unreliable on Windows or if
the use of GetAsyncKeyState() is simply historical, but for now
I've left the Windows call in there just in case.
This does mean that Host_GetKeyState() is currently only valid
for the small set of keycodes that overlap between wx and Win32,
one of which is VK_TAB/WXK_TAB.
Anyway, please test wxGetKeyState on Windows and remove the
ifdef if it works, so we can extend it to the remaining hotkeys.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6988 8ced0084-cf51-0410-be5f-012b33b47a6e
- Reimplemented AbortFrame. Now the Write Gather Pipe buffer is reseted and Read Write Distances is reseted before the game do it instead the process all GP CPRWDistance for prevent CP wrong pointers.
This fifo reset should be more accurate, efficient and smooth the FPS when happens. Please, test regresion of SMG1 and SMG2 or others games with FIFO RESETS.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6971 8ced0084-cf51-0410-be5f-012b33b47a6e
assumption on the part of many linkers that static libraries make
up a DAG, so merge libdspcore into libcore.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6967 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes the OS X build more robust and should help pave the
way for the integration of the video plugins as well as LTO.
There are now no more global class level namespace conflicts left,
as evidenced by the fact that Dolphin can be linked with -all_load,
not that you would want to.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6958 8ced0084-cf51-0410-be5f-012b33b47a6e
This WILL temporarily break the Linux and MacOSX builds but should be easy to fix.
Things left to do:
* The UI on the new Audio tab for the LLE/HLE choice is ugly
* At times the code still look "plugin-y" and needs cleanup
* The two plugins should be merged further. DSPHLE should use the emulated memory etc of DSPLLE as much as possible, so that simply saving the DSPLLE state is enough. This would also bring the possibility of savestate compatibility between the two plugins.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6947 8ced0084-cf51-0410-be5f-012b33b47a6e
Updated several of the other language translations thanks to the growing Dolphin translation team.
Make it easier for translators to deal with a few strings in the code by not concatenating strings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6922 8ced0084-cf51-0410-be5f-012b33b47a6e
add some nice messages for SE LED commands.
allow exi communication even if there is no tcp client.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6879 8ced0084-cf51-0410-be5f-012b33b47a6e
'#' is a fairly accepted comment character for .ini files along with
the more official ';', but '//' isn't.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6872 8ced0084-cf51-0410-be5f-012b33b47a6e
Mark a couple of strings for translation that were missed before.
Update some of the languages from the translators.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6856 8ced0084-cf51-0410-be5f-012b33b47a6e
Set up an exit(3) task to shut down real wiimotes. This shouldn't
really be necessary, but we do currently handle a number of error
conditions by calling exit(3).
Retire the inputuicommon library.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6852 8ced0084-cf51-0410-be5f-012b33b47a6e
Use wxS to get the right string type on either 2.8 or 2.9.
Default to cmd-f for the fullscreen toggle hotkey on OS X.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6820 8ced0084-cf51-0410-be5f-012b33b47a6e
in the title bar. It is more usefully displayed using the overlay
and long pathnames are not suitable for title bars and probably not
even safe depending on the underlying windowing system.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6817 8ced0084-cf51-0410-be5f-012b33b47a6e
full-screen mode is toggled, so we just re-set it afterwards.
Didn't mean to include the version string in the status bar updates.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6814 8ced0084-cf51-0410-be5f-012b33b47a6e
Placing the render window at position 0,0 makes it unmovable on OS X.
Use the conventional r1234 format for SVN revision numbers.
Delete mis-copied .svn directories from the application bundle.
Only warn about a failed low-memory allocation if one was requested.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6811 8ced0084-cf51-0410-be5f-012b33b47a6e
Even with LoadStorePaired accounted for, there are still some
niggling 64-bit cleanliness bugs left that are not practical
to weed out on a single platform. We should probably have an
option to use >2GB memory only on all platforms for debugging.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6792 8ced0084-cf51-0410-be5f-012b33b47a6e
It will now decode entities of unsupported FAT32/NTSC/etc characters in filenames to be returned, so that games such as HP:HBP won't fail to find files containing such unsupported characters.
Unless there are still parts of code waiting for file name replacements, this should completely fix issue 3443...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6791 8ced0084-cf51-0410-be5f-012b33b47a6e
As side-effect, changed GameListCtrl sorting to use the configured IPL/GC language instead of the UI language, which is misleading with missing translations, and possibly wrong if we ever get translations that are not part of the GC ones.
In case we want the old behavior back, revert GameListCtrl.cpp and ISOProperties.cpp.
For translators: use either "<System>" if your operating system is the same language as the one you're translating for, or replace one of the others. Someone will add them to the list when they are committed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6785 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the number of connected wiimotes in the configuration dialog so it works with translations, and update translations accordingly.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6771 8ced0084-cf51-0410-be5f-012b33b47a6e
the occasional HLE wiimote disconnection, although nowhere it was at
near the level before both the recent wiiuse integration and adding
the queue in the first place.
The callback-based bluetooth input method on OS X really requires
that packets be accepted immediately and the 1ms polling done by the
wiimote worker threads isn't quite good enough.
So just play along with the native OS X model and send the packet up
our stack directly from the callback. With our current API, this is
kind of a layering violation, but it seems less messy than either
putting back internal queueing in IOdarwin.mm or adding the platform
support for higher-frequency polling than what usleep(3) offers.
Perhaps we should just change our own API to a callback model. While
this makes no real difference right now, it would make it a fair bit
cleaner to accept new wiimotes at any time instead of having to click
Refresh, although with the recent realmote changes, that feature can
probably just be hacked in by looping around FindWiimotes().
For other platforms having problems with HLE disconnections caused by
dropped bluetooth packets, as a first stop I would suggest trying to
do more than just one wiimote->Read() per iteration in the thread.
This change also conveniently sidesteps another new IOdarwin.mm bug
where the discovery and I/O code would clash during a refresh because
they use the same default CFRunLoop, so if we switch back to using a
run loop for I/O, must remember to create a separate one.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6743 8ced0084-cf51-0410-be5f-012b33b47a6e
reads the high bits from the mailbox registers. It is probably waiting for
the dsp to read the data from the cpu-to-dsp mailbox or for the dsp to
write to the dsp-to-cpu mailbox.
This about removes DSP::Read16 from lle profiles where it previously used
up to 2% of all system time. Also speeds up games quiet a bit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6719 8ced0084-cf51-0410-be5f-012b33b47a6e
additional input queueing in IOdarwin appears to be unnecessary.
IOBluetoothDeviceInquiry does not find already connected devices,
so no need to filter those out.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6710 8ced0084-cf51-0410-be5f-012b33b47a6e
Avoid sending the Wii OS bluetooth packets with uninitialized data
past the nominal length of the report.
XXX IOWin.cpp still always returns MAX_PAYLOAD because I don't have
a Windows environment to test with.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6708 8ced0084-cf51-0410-be5f-012b33b47a6e
A lot of tests are failing right now, not sure yet if this is caused by the recent reg changes or other stuff (at least broken according to tests: iar, subarn, addarn, 'ir, 'nr, 'l, 's, 'sn, 'ln, 'lsn, 'lsm, 'lsnm, 'sl etc - err, most/all that use increase/decrease)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6683 8ced0084-cf51-0410-be5f-012b33b47a6e
logging: turn off write to file
core: don't insert anything in memcard b slot
video: efb scale to integral, AF to 1x
audio: 100% volume, 48KHz sample rate
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6650 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes issue 3703.
Note that HLE wiimote activation is currently a little broken, so to
use multiple wiimotes you need to open the wiimote configuration window,
refresh (connect to) the real wiimotes, start the emulation and then
select Connect Wiimote 2/3/4 from the Tools menu or with hotkeys.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6648 8ced0084-cf51-0410-be5f-012b33b47a6e
wiimote bd's are now read from (or added to if < 4 exist) SysConf
in theory you should be able to use any valid sysconf file now,
but i would advise against using a dolphin edited SysConf on a wii
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6646 8ced0084-cf51-0410-be5f-012b33b47a6e
* change File::GetSize to fetch the size directly from the open file instead
of stat'ing it when challed with a FILE*
* use changed File::GetSize(FILE *f) instead of calling with file name in two
places
* remove "seek_pos % file_size" hack for ZTP, so one can seek to the end of
file again. Please check Zelda: Twilight Princess for regressions
* return error codes when reading or writing from/to a file
A lot of those changes are from j4ck.fr0st, so kudos to him.
I did not change the file open mode for ISFS_OPEN_WRITE to "wb". While that
would probably be more correct, it says in the comment that it might affect
Mario Kart Wii. I would prefer somebody with that game try that change
locally first.
Please check your games for regressions (or even improvement). Some games that
may be affected are Zelda - Twilight Princess and Metroid Prime 3.
Fixes issue 1749
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6634 8ced0084-cf51-0410-be5f-012b33b47a6e
fixes system menu loading the ini file from the last run game
also check for all countries when setting bntsc for wad/nand titles
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6590 8ced0084-cf51-0410-be5f-012b33b47a6e
Changes file dialog to show *.bin for wii save import instead of data.bin
Move Sram dumps to Sram.cpp and change default FlashID
Fixes issue 3711.
Fixes issue 3042.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6588 8ced0084-cf51-0410-be5f-012b33b47a6e
* Optimised the updating of g_dsp.pc in the compile loop (code by kiesel-stein)
* Added JIT version of LRI (code by kiesel-stein)
* Added JIT versions of the branch instructions (code by Jack Frost)
* DSP_SendAIBuffer fix (code by Mylek)
* Marked instructions that update g_dsp.pc in the DSP table and updated PC based on the table (speed up)
* Fixed the signed bits not being set properly in the addr instruction
* Created a MainOpFallback function to use interpreted versions of the instructions if necessary (code by kiesel-stein)
* Disabled the jit versions of subarn and addarn as they are slowing down NSMBW
The above work in both x86 and x64 modes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6582 8ced0084-cf51-0410-be5f-012b33b47a6e
Make sure the gfx debugger unpauses when the emulator is stopped.
When a wad is installed make sure directories exist.
For the cmake build if a header is not provided in the check_lib macro don't check for it, and assume pkg-config was supposed to work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6581 8ced0084-cf51-0410-be5f-012b33b47a6e
allows using any (valid) memorycard.raw in any slot (including real memcard dumps)
Fixes issue 684.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6576 8ced0084-cf51-0410-be5f-012b33b47a6e
- I've implemented calling to ProcessFifoEvents when is there is a pending event in the main queue from CP, PE & GP
- I've implemented FifoIntReset(TRUE, TRUE) in write Clear Register.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6572 8ced0084-cf51-0410-be5f-012b33b47a6e
the black screen in Sonic Colours. Both JIT and JITIL have this work-around.
Re-enabled ps_mul as that instruction was not the root cause.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6565 8ced0084-cf51-0410-be5f-012b33b47a6e
Notable Changes:
Fixes right click menu in linux.
Fixes Issue 2412.
sram.raw file is no longer required to format a memcard
Update to use new ini sections, automatically remove default settings from ini file
enable pages setting no longer requires memcard manager to be reopened to take effect
it is no longer possible to switch to a negative page number
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6546 8ced0084-cf51-0410-be5f-012b33b47a6e
systems where size_t is typedef int.
It's either this or use the C99 %zu but while we can probably
safely assume C99 compilers, I am not at all sure that that's the
case for stdio libraries and this solution is fairly low-impact.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6535 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the default wiimote emulation mouse button settings on linux.
Fix a little c++ operator precedence issue.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6534 8ced0084-cf51-0410-be5f-012b33b47a6e
for the real wiimote thread as for the other threads.
Turns out we use OS X bluetooth API's that were introduced in 10.5.4.
Remove vestiges of previously removed wiiuse_set_bluetooth_stack().
XXX We should probably have a Common equivalent of htonl and friends.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6531 8ced0084-cf51-0410-be5f-012b33b47a6e
Most of the code dealing with the LogTypes namespace was C which lead to a
lot of nonsensical casting, so I have dumbed LOG_TYPE and LOG_LEVEL down to
plain C even though the move of wiiuse into Source means we don't currently
call GenericLog from C.
Set logging threshold to MAX_LOGLEVEL at startup so debug builds will also
p rint debugging messages before the GUI is running.
For some reason the way we use SetDefaultStyle doesn't play nice with wx 2.9
so we just get the default black text on a black background. Using a gray
background works around that problem, but I found it to also be much easier
on the eyes so I have switched the background color on all versions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6528 8ced0084-cf51-0410-be5f-012b33b47a6e
Replaces all occurrences of ftell and fseek with ftello and fseeko, respectively. This matters on non-win32 where only these names are altered by the _FILE_OFFSET_BITS define. Win32 still just maps the funcs to ftelli64/fseeki64.
Also add some File::GetSize I had skipped in my last commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6515 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the macosx build (perhaps).
This changes the JitIL timed profiling to using assembly language to obtain the time. It does seem to be faster. Not sure if it will work on macosx, but if it does it has the necessary precision that gettimeofday does not have.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6448 8ced0084-cf51-0410-be5f-012b33b47a6e
Marko Pusljar