Patch from user gamepromcompany on the MacOSX_Build wiki page.
Add support for the Mac command key as a hotkey modifier in
WXKeyToString but present it as Control. WXKeyToString is used for
both hotkeys and menu accelerators, the latter only supporting
Shift/Alt/Control with wxWidgets.
wxSpinCtrl on wx 2.9 has a very small default size, so give the
window size ones a reasonable size.
Use wxFULLSCREEN_ALL when switching to fullscreen, which gets rid
of window decorations like the title bar. Note that to actually
be rid of it with wx 2.9 on OS X, you'll need this patch:
http://trac.wxwidgets.org/ticket/11701
Also remove a couple of files I had accidentally duplicated.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5642 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes a number of problems, including unreliable connection setup,
frequent disconnections, busy-waiting and shutdown deadlocks.
Motion Plus and nunchuk hot swapping now work and Wiiuse does a small
amount of queueing to prevent occasional dropped packets. The OS X
bluetooth stack has no internal input buffering and while a worker
thread can easily keep up with data coming from the Wiimote, the rest
of Dolphin can easily get behind if it is blocked by disk I/O or
similar. Mostly the Wiimote protocol recovers from dropped packets,
but sometimes the Wiimote would get out of sync and send a disconnect.
I wonder if the other platforms might benefit from a bit of queueing
at this layer as well.
Still doesn't support multiple devices, as I kept changing my mind
about how best to do it. I only have one Wiimote anyway..
One improvement to the Wiimote plugin that would be really nice would
be for the scan for new devices to operate continuously or periodically
like on a real Wii rather than just for 5 seconds at startup..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5640 8ced0084-cf51-0410-be5f-012b33b47a6e
efb scale :
auto fractional: the original scaling way, will grant a 1:1 pixel mapping between efb and screen giving the best image quality even in non standard resolutions
at the cost of glitches in some games.
auto integral: automatic but only int values for the scale, no glitches but only the correct pixel scaling when using some resolutions.
the rest are the fixed scales.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5639 8ced0084-cf51-0410-be5f-012b33b47a6e
enable newline normalization
get revision number via `hg svn info` for svnrev.h
ignore incremental/generated binary files (windows/VS at least)
leave a comment if some files need native eol set in svnprops
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5637 8ced0084-cf51-0410-be5f-012b33b47a6e
We really should integrate the nowx functionality into the main build,
removing nowx and HAVE_WX checks and turning USE_WX into a variable
that defaults to GUI use but can be overridden at the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5630 8ced0084-cf51-0410-be5f-012b33b47a6e
hotkey configuration working with wx 2.9, but it turned out to be
too tempting to use it to hack up OS X keyboard support using wx
key events in the "old" input plugins.
It was with some reluctance that I used PAD_Input (and copied it
for Wiimote as well) as that is clearly a deprecated interface,
but this way the hack is contained within the old plugins for when
the switchover to ControllerInterface happens.
The idea is to provide stable keyboard support on OS X for both
GCPad and Wiimote while we debug HID keyboard and real 'mote code.
It works pretty well, although the wx approach does impose a few
limitations like no arrow keys and left/right side modifier keys
are considered equivalent.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5622 8ced0084-cf51-0410-be5f-012b33b47a6e
in general cleanup and bugfix disable pierre patch for the moment as it causes problem in some games and hopefully fix the remaining missing textures for nvidia users in opengl.
make the code in pixelshadergen looks nice and readable.
D3D: this is a ultra experimental commit please check for regressions or error.
make the efb Scale / super sampling level customizable to improve the output quality and let the user configure quality according to his hardware.
is everyone likes this change will translate it to opengl
please test
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5612 8ced0084-cf51-0410-be5f-012b33b47a6e
Not only does it change tons of files to switch to a new and non-working (it doesn't parse my ini files, at least) ini parser, it also reshuffles a lot of code and removes a plugin. The latter part is fine, but doing these two major switches in one revision, one of which is broken, is completely unacceptable. I said to merge tiny changes, not massive reworkings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5589 8ced0084-cf51-0410-be5f-012b33b47a6e
Details: Issue consisted of IR data overflowing extension data on IR report change e.g. mode 3 to 1, which happens for instance when changing data report mode from 0x33 to 0x37.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5588 8ced0084-cf51-0410-be5f-012b33b47a6e
variables, writeable strings and dangerously shadowed variables.
index(), gamma(), exp() and y0() are POSIX functions and using those
names can cause namespace confusion.
A number of C files were missing the final newline required by ANSI C
and some versions of GCC are pedantic enough to complain about this.
These changes simply the scons build, allowing us to get rid of
filterWarnings which is simply more trouble than it's worth.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5574 8ced0084-cf51-0410-be5f-012b33b47a6e
Using Unix tools to operate on a tree containing filename with spaces in them
is really annoying, so rename the handful of instances where there were spaces.
Host.cpp has never been used.
Games tend to lookup the following directories that we don't yet have anything
to put in, so prepopulate them in Data/User/Wii:
title/00010001
title/00010002
title/00010003
title/00010004
title/00010005
title/00010006
title/00010007
meta
shared2/title
Set eol-style native on a number of text files which didn't already have it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5572 8ced0084-cf51-0410-be5f-012b33b47a6e
All visuals with parameter GLX_SAMPLE_BUFFERS_ARB = 0 have
GLX_SAMPLES_ARB = 0, so the old code would only ever choose
visuals with GLX_SAMPLE_BUFFERS_ARB>=1 and GLX_SAMPLES_ARB>=1.
Some drivers do not export any multisampling capable visuals,
so dolphin fails to find a matching visual and falls back to
the single buffered visual(which does not work for some yet
unknown reason). Fixes issue #2647.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5565 8ced0084-cf51-0410-be5f-012b33b47a6e
* Restore Audio Throttle to function properly, broken by Ayuanx many hundreds of revisions back.
* Simplify DSPLLE JIT dispatcher in preparation for an asm rewrite
* Remove hack that made DSPLLE JIT seem faster than it was by running fewer cycles, but resulting in bad sound. This shows off how mysteriously slow it is - I don't understand why it's not faster. Use the DSPLLE interpreter for now if you want to use DSPLLE.
* Made "DSPLLE on Thread" work properly with correct-ish timing - although the speed benefit is really small now.
If it seems like this change slows anything non-LLE down, try turning off Audio Throttle and use the frame limiter in options instead.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5541 8ced0084-cf51-0410-be5f-012b33b47a6e
Removing and adding some elements, making it more readable for others.
Off-Topic: Have fun at the Grandprix! May the best win:P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5536 8ced0084-cf51-0410-be5f-012b33b47a6e
This is especially perceptible for "big" textures, so e.g. EFB copies to RAM should be a bit faster now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5531 8ced0084-cf51-0410-be5f-012b33b47a6e
Apparently, motionplus games are very strict on calibration data checksums, they don't like invalid/0x00'd checksums(this is trackable via 0x01 writes to the active extension register at 0xA400F3). I'll keep all motion plus related stuff that I've discovered on my blog: http://snzgoo.blogspot.com
Next time I'll fix the disconnects, which are most likely caused by the sent motionplus empty/dummy data.
So stage2 might come sooner than u guys thought. Let me hear u scream;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5522 8ced0084-cf51-0410-be5f-012b33b47a6e
Just minor stuff that needs to be finished: Dummy motionplus data needs to be kept dynamic(just like wiimote accel data), or it might cause disconnects after some time. Furthermore, there are 1-2 remaining register writes that have to be understood and emulated.(e.g. 0x00F3/F4). In the end just minor stuff. I'll address that in my next commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5476 8ced0084-cf51-0410-be5f-012b33b47a6e
as a nice result of this eliminate the nasty glubuild2dmipmaps.
thanks to neobrain and orphis for discovering the error and the right values
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5475 8ced0084-cf51-0410-be5f-012b33b47a6e
this not solve the remaining projection problem in some games like mario kart wii
will work that problem later.
please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5473 8ced0084-cf51-0410-be5f-012b33b47a6e
almost fixed real xfb in d3d, i say almost because there are some minor scalling problems. hope will fix them soon.
implemented a more intelligent index generator to emulate more accurately the behavior of the gc.
please give me feedback on this changes.
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5465 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented fixed efb scale to improve alignment and discard some error caused by incorrect scale.
make both plugins work similar. this must improve opengl image quality a lot.
also implemented dynamic resizing in opengl, this way the resolution math the windows resolution on resize.
this is highly experimental so please test a lot.
implemented shader dumping on error thinking in future experiments with shaders.
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5458 8ced0084-cf51-0410-be5f-012b33b47a6e
a MAYORRRRRR change in pixel shader generation, please review all games you can and leave comments this must improve accuracy in graphic emulation a lot.
for example: mario eyes in super mario galaxy, water pod transparency an water transparency on game intro in super mario sunshine, etc.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5457 8ced0084-cf51-0410-be5f-012b33b47a6e
I also already implemented most of the needed data structures and datareport handling for the motionplus-nunchuk passthrough mode, which I'll add up next as well.
Wii Sports Resort is now bootable by just using an emulated wiimote (only working under the old wiimote plugin atm,
I asked billiard to port my commit into his plugin since he knows his plugin better than me and its less work for him than for me,
I kept most parts of my code in modules to simplify that task).
Upcoming stage2: Faking the motionplus on the fly on real wiimotes, that means you will be able to play, e.g. Redsteel2 with a real wiimote and nunchuk or wii sports resort with just your real wiimote.
and nunchuk, but w/o the need of having a real motionpluscontroller connected. The new Zelda 2010 will benefit by that, since it will require a motionplus controller.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5438 8ced0084-cf51-0410-be5f-012b33b47a6e
make native mips loading an option to prevent performance lost in game that not need this functionality.( thanks to dorian.fevrier for point the performance lost.)
added a patch from pierre@pirsoft.de to avoid vertex drops when index array is full in opengl implementation that do not support large index arrays
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5432 8ced0084-cf51-0410-be5f-012b33b47a6e
No need to press the "refresh wiimotes" button on pair up anymore, checking the extended pair up box(still experimental) allows u to pair and hook up the wiimote while being ingame. You still need to do the ALT+F5/F6/F7/F8 connect, but you wont need to press the pair up button + refresh button anymore, feel free to test it, its not perfect yes. Just press 1+2 on your Wiimote to pair it up ingame(you need to check the extended pair up box for that feature).
PS I hope I didnt break nonwin32 builds, I gave my best however.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5413 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a window size setting for windowed mode.
Also pulled some X11 specific code out into a separate file.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5395 8ced0084-cf51-0410-be5f-012b33b47a6e
add an option to limit fps instead of vps for games with bad synchronization
some minor fixes in d3d gui
enjoy :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5394 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix an issue with the DX9 plugin not being the correct size when starting the game in fullscreen at a higher resolution than the desktop resolution.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5375 8ced0084-cf51-0410-be5f-012b33b47a6e
Also disabled some code in the same place that caused the application to hang in linux. This means that if you select keys from the key list you will have to click Set to make it take effect. At least until I can figure out how to get that working.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5368 8ced0084-cf51-0410-be5f-012b33b47a6e
Moved ControllerInterface to InputCommon. Moved GCPadNew GUI/Config code to a new project, InputPluginCommon. It is used by both GCPadNew and WiimoteNew. I hope that I included everyone's fixes to GCPadNew and ControllerInterface.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5355 8ced0084-cf51-0410-be5f-012b33b47a6e
Also improve the visual appearance in linux. I think I have done so without hurting the appearance in windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5348 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added Xlib.cpp to the linux build. It is completely non-functional but it builds.
Finally, did some clean up of GCPadNew.cpp.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5298 8ced0084-cf51-0410-be5f-012b33b47a6e
Disabled game-specific Wii/Progressive Scan checkbox, since its never used by Dolphin; it would cause side-effects to global configuration if we did write to SysConf in that place.
Fixes Issue 2518
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5283 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed fps display in the top bar, now it shows the real fps of the game.
some code clean up and some corrections to make everything work right in the reference renderer.
multiples xfb now is broken even in single core as is was not an error caused by dual core, i really dono where the error is,everything looks correct but if you test a game with multiples xfb or the ipl you will see the error.
ector if you can take a look at he code and throw me some ideas i'll thank you.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5272 8ced0084-cf51-0410-be5f-012b33b47a6e
Removed the obsolete projection hacks:
* Final Fantasy CC Echo of Time
* Harvest Moon Magical Melody
* Baten Kaitos
* Baten Kaitos Origin
* Skies of Arcadia
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5271 8ced0084-cf51-0410-be5f-012b33b47a6e
It breaks the linux build now. SDL version 1.3.0, which includes SDL_haptic, is not available for most linux distributions at this time.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5264 8ced0084-cf51-0410-be5f-012b33b47a6e
It's currently only really usable on Windows. Linux/OS X will need keyboard support added in, but SDL should work for joysticks on non-Windows without too many modifications.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5254 8ced0084-cf51-0410-be5f-012b33b47a6e
the problem is one strange behavior i found, in opengl when xfb is enable, frame limit causes the frame rate to be limited exact half the correct speed, so if you choose auto and the game uses 30 fps you get 15 fps
so in opengl, you have to limit to the exact double of the game speed, 100 to pal games and 120 to ntsc.
in d3d this not happened every time, it just happen when you change some time consuming setting like changing the ssaa or resizing the window, in that case you have to disable and re enable frame limit to get the correct fps
to all the devs please if you can help me debug this, will give you a lot of thanks as i'm short in time to debug this error and is driving me crazy not to find the source of the problem.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5249 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the problem with wiimote plugin not saving information correctly for the auto reconnect option.
Fixes issue 2475
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5246 8ced0084-cf51-0410-be5f-012b33b47a6e
Soren Jorvang