more accurate means more slow so no complains about speed lost, will optimize later.
please test for regression, but i hope you will get a nice surprise about this commit :).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6881 8ced0084-cf51-0410-be5f-012b33b47a6e
* Change the process ProcessAllDistace to ClearRegister
* Fix a bug in ProcessFifoEvents() in commandProcessro (thanks Skid)
-- The last 2 items should be improve the speed lost in r6572 and maybe improve a little bit because ProcessFifoEvents() is right. (Test car selection in GxZero)
* Alliviate Fifo desyncs, In the meant time I still Researching for real solution. (This fix RE0 again and maybe others
"FIFOs linked but out of sync" and "GFX FIFO: Unknown Opcode (0x%x).\n" games suffers these for desync.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6837 8ced0084-cf51-0410-be5f-012b33b47a6e
please test for regressions and fixes.
some little changes to make pixel shader more dx9 sm2.0 friendly. the condition is not to use pixel lighting ( sorry no hardware support for the quantity of parameters needed).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6777 8ced0084-cf51-0410-be5f-012b33b47a6e
The code now uses direct pointer access from C code to write the colors to the destination texture instead of trying to force them back up into an __m128i and a single write call. This is what produces the major speed-up.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6761 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed a bug on Texture Converter when Copy EFB to RAM's cache is disabled, so...
* ...accordingly, I revert my latest commit because now it becomes useless.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6760 8ced0084-cf51-0410-be5f-012b33b47a6e
- Assign width and height to the actual powers of two rather than to the exponents...
- Clean up FramebufferManager()
- Make use of more depth buffer formats to prevent some devices from failing to create a depth buffer
Should fix issue 3256.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6730 8ced0084-cf51-0410-be5f-012b33b47a6e
the private SVN_REV_STR which relies on finicky build mechanics.
With SCons, kill the old svnrev.h in Source if still present.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6715 8ced0084-cf51-0410-be5f-012b33b47a6e
GX_TF_RGBA8 texture decoder optimized with SSE2 producing a ~68% speed increase over reference C implementation.
TABified the entire document per NeoBrainX. :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6706 8ced0084-cf51-0410-be5f-012b33b47a6e
~25% speed improvement in decoding GX_TF_RGB5A3 textures which aren't used very much. I thought it would help for movie playback but I misled myself. Video playback has nothing to do with this texture format.
Next I'll see if I can knock out some of these other texture decoders. Byte swizzling I'm sure can somehow be accomplished using _mm_unpacklo_epi8 trickery, so that'd be another big win I hope.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6698 8ced0084-cf51-0410-be5f-012b33b47a6e
TextureDecoder.cpp: merged two functionally identical decode5A3RGBA and decode5A3rgba methods.
OpcodeDecoding.cpp and DLCache.cpp: optimization for GX_LOAD_XF_REG. The PSUHFB solution sounds better for SSSE3, but this is a small win for the default case.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6692 8ced0084-cf51-0410-be5f-012b33b47a6e
Whatever that means, it fixes that stupid Super Mario Sunshine glitch and possibly lots of other stuff, so test as many glitchy games as possible with this ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6669 8ced0084-cf51-0410-be5f-012b33b47a6e
Should fix almost all regressions of the recent ClearScreen changes and keep the fixed stuff.
The Super Mario Sunshine glitch is caused by another issue and will be addressed in my next commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6668 8ced0084-cf51-0410-be5f-012b33b47a6e
corrected peek color and peek z to correctly emulate real hardware formats.
implements native gamma correction.(i don't own any game that uses this functionality so i will appreciate feedback)
i need a lot of feedback in this changes please
enjoy
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6664 8ced0084-cf51-0410-be5f-012b33b47a6e
make some changes to the Clear code. please test a lot , the point of this commit is to determine the correct behavior of the efb clearing so feedback is welcome
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6663 8ced0084-cf51-0410-be5f-012b33b47a6e
1) What is the FIFO? The fifo is a ring queue for write (CPU) and read (GPU) the graphics commands.
2) What is the Brakpoints? The breakpoint is the FIFO mark to allow parallel work (CPU-GPU) When the GPU reached the breakpoint must stop read immediately until this Breakpoint will be removed for the CPU.
3) What is an overflow? The CPU write all room FIFO possible, and like a ring overwrite commands not processed yet.
4) ¿Why you have an overflow? In theory should not have an overflow never because the fifo has another mark (High Watermark) When the CPU Write reach this mark raise a CP interruption and the FIFO CPU WRITES should stop write until distance between READ POINTER AND WRITE POINTER will be equal to another mark (LO Watemark to prevent and overflow.
5) ¡So if impossible why you have overflows? Simple, the CP interruption is processed later and the Overflow happens. (there is a lot of theories about this)
6) ¿Why is no so simple like when CPU WRITE POINTER is near to the end of the FIFO only process pending graphics command?
Because when this happens sometimes we are in BREAKPOINT and is IMPOSIBLE process the graphics commands.
- This HACK process the pending data when CPU WRITE POINTER is 32 bytes before the end of the fifo, and if there is a Breakpoint force the situation to process the commands and prevent an overflown.
In theory you have not see "FIFO is overflown by GatherPipe nCPU thread is too fast!" anymore. But if you have a hang in game where you had this please read the NOTICE LOG in user\logs, I've added this message "FIFO is almost in overflown, BreakPoint" when the hack is activated. (I will delete this message very soon)
Good Luck!! PD: Shuffle sorry for the large commit description :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6662 8ced0084-cf51-0410-be5f-012b33b47a6e
logging: turn off write to file
core: don't insert anything in memcard b slot
video: efb scale to integral, AF to 1x
audio: 100% volume, 48KHz sample rate
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6650 8ced0084-cf51-0410-be5f-012b33b47a6e
- Clear alpha channel to 0xFF instead of 0x00 whenever we (re-)create the EFB texture
- Disable color/alpha channels whenever the actual EFB format doesn't use them
Fixes issue 2826.
Fixes issue 1879.
Please check if issue 3014 is fixed now, as well as any other games which might have broken due to ClearScreen changes.
For what it's worth, Super Mario Sunshine still shows a small glitch even with these changes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6635 8ced0084-cf51-0410-be5f-012b33b47a6e
Will fix some games and break some others.
Assist trophies in SSBB work fine now, Super Mario Sunshine is a little broken again.
Still needs some more work...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6627 8ced0084-cf51-0410-be5f-012b33b47a6e
skid_au had implemented this in a previous revision and enabled it by default, but it caused glitches if STC wasn't set to "safe" (which kinda defeated the purpose since it slowed down stuff again).
Also renamed the "safe texture cache" to "accurate texture cache", since setting the "safe" texture cache to "safe" sounds kind of silly..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6625 8ced0084-cf51-0410-be5f-012b33b47a6e
this is mainly so they fit within ps_2_0 limits, but I made this separate from my last checkin to make it easier to test separately in case it somehow causes problems
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6619 8ced0084-cf51-0410-be5f-012b33b47a6e
(probably nobody else cares, but I need at least one video plugin that actually works on this computer)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6618 8ced0084-cf51-0410-be5f-012b33b47a6e
- Merge the EmuWindow class to VideoCommon.
- Implement free look in the D3D plugins. Seems like it had broken before though; only rotating the view works..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6616 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes issue 2805. Fixes issue 3235.
If this causes problems on Windows, just use this intead:
#if defined(HAVE_X11) && HAVE_X11 || defined __APPLE__
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6614 8ced0084-cf51-0410-be5f-012b33b47a6e
To do so I had to re-add the casting bloat removed in revision 6102. Also, for some odd reason the NVidia OpenCL drivers don't like 8 bit rotations, but are okay with 2, 4 bit rotations. These are apparently bugs in the NVidia drivers that are hopefully fixed in future versions.
Also, on linux make sure the TextureDecoder.cl file is copied from the shared data directory to the users directory.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6611 8ced0084-cf51-0410-be5f-012b33b47a6e
* More formats recognition for "Clear Screen" step. Improved the ability handling the alpha channel (% color translucency).
* Related to CPUID detecting:
- Added support displaying correct SysInfo for recent multicore Intel CPUs x86-64 with HT/SMT (Core i3/i5/i7 and Xeon) based on Nehalem architecture.
+ minor and passive changes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6604 8ced0084-cf51-0410-be5f-012b33b47a6e
Also set up cmake/cpack to create prebuilt binary packages and source packages.
Also change the vertex shader dump file name in the gfx debugger to something that makes more sense.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6587 8ced0084-cf51-0410-be5f-012b33b47a6e
Make sure the gfx debugger unpauses when the emulator is stopped.
When a wad is installed make sure directories exist.
For the cmake build if a header is not provided in the check_lib macro don't check for it, and assume pkg-config was supposed to work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6581 8ced0084-cf51-0410-be5f-012b33b47a6e
DX9: Revert to the old EFB coordinate scaling. Glitches caused by higher EFB scales probably can't even be fixed properly in DX9, so let's not even mess with it...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6573 8ced0084-cf51-0410-be5f-012b33b47a6e
- I've implemented calling to ProcessFifoEvents when is there is a pending event in the main queue from CP, PE & GP
- I've implemented FifoIntReset(TRUE, TRUE) in write Clear Register.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6572 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix some compiler warnings.
On linux don't install the license.txt file. Most distributions handle license files via a package. For example on debian based systems this gives a lintian warning.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6568 8ced0084-cf51-0410-be5f-012b33b47a6e
- Improved the GP Register Status: now this is all the time from the fifo loop.
- Improved the Interrupts manage:
1) Removed All UpdateInturrupts from CommandProcessor Writes and Read.
2) now the CP interrupts are schedule from the video thread and the fifo loop waiting until this happens
3) considering Inmediate mode for the CP interrupts
3) Implemented Interrupt CP Cache State
4) Implemented only Overflow interrupt in GatherPipeCheck because this need to be detected quickly.
- Implemented Overflow handling like a real HW, when Hiwatermark interrupt happens this write ClearRegister with True en HI and False in LO (FifoIntReset) after that a Control Register is writed and the FIFO is processed to LO Watermark.
- Removed all ugly code from LO and HI watermark manage
- Removed all ugly code from BP manage
- Change >= by == in the BP clauses
- Removed speed hack (1024 chunk) for better GP Status Control.
- Commented GXSetGPFifo very soon hack
- Commented FackWatchDog hack
- Commented FIFO_RW_DISTANCE = WritePointer hack
This is the beginning and the base for the future., If this broke your favorite game my apologize, only report this and will try solve it. If you have a Overflown don't worry, I've implemented the real solution code using the Overflow Interruption only need continue working for a perfect protection. Why I did it? Because is preferable a accurate and clean fifo instead hack y fifo for improve that. Thanks to DONKO for you awesome Video Plug in and skid for the chatting. PD: I have 7-10 fps more in the star fox video. bye :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6554 8ced0084-cf51-0410-be5f-012b33b47a6e
Should fix problems caused by EFB scales other than Native (excluding fractional!). Test whether this fixes games which work fine with native EFB resolution but show glitches with higher internal resolutions.
Also fixed numerous warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6549 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the default wiimote emulation mouse button settings on linux.
Fix a little c++ operator precedence issue.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6534 8ced0084-cf51-0410-be5f-012b33b47a6e
Most of the code dealing with the LogTypes namespace was C which lead to a
lot of nonsensical casting, so I have dumbed LOG_TYPE and LOG_LEVEL down to
plain C even though the move of wiiuse into Source means we don't currently
call GenericLog from C.
Set logging threshold to MAX_LOGLEVEL at startup so debug builds will also
p rint debugging messages before the GUI is running.
For some reason the way we use SetDefaultStyle doesn't play nice with wx 2.9
so we just get the default black text on a black background. Using a gray
background works around that problem, but I found it to also be much easier
on the eyes so I have switched the background color on all versions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6528 8ced0084-cf51-0410-be5f-012b33b47a6e
so the recent addition of VideoCommon/Src/Debugger.h clashed with
DebuggerWX/Src/Debugger.h.
The latter had atrophied anyway, so just get rid of it to resolve the
conflict.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6526 8ced0084-cf51-0410-be5f-012b33b47a6e
Separated UI from debugger functionality. Generally cleaned up that stuff.
Most functionality needs to be reimplemented now, but will be available to D3D9, D3D11 as well as OpenGL then.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6523 8ced0084-cf51-0410-be5f-012b33b47a6e
first fix for issues introduced in sms in r6501, please test for a regressions in The Calling
Second Fix for Issue 3539, by making pixel Dept calculation an option. in games with this issue Enabling pixel depth will solve the issue, in other games disabling the option will not cause speed lost
some cleanup in dlist cache
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6517 8ced0084-cf51-0410-be5f-012b33b47a6e
* I've fixed concurrency problem with fifo.bFF_GPReadEnable when the breakpoint is achieved
* I modified when fifo.bFF_Breakpoint is turn off to prevent that the interruption happens
* I reverted r6483
* I improved the commit r6495 adding another protection when the GPRead is enabled in CTRL_REGISTER
You can test Pokemon XD in dual core mode is more estable now :P This commit could solve others hangs fifo related in DKC, Sport Resorts, etc. I dont have these games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6503 8ced0084-cf51-0410-be5f-012b33b47a6e
Plus: I added a _assert_msg_ in FIFO loop when the WriteDistance is negative. Please if that happens report it, this can help to solve strange issues with wrong WriteDistances.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6495 8ced0084-cf51-0410-be5f-012b33b47a6e
In this way it prevents wrong fifo.CPReadWriteDistance in the future. That should fix RE0 Issue 2846 and others "Warning: GFX FIFO: Unknown Opcode (0x4d)" in dual core mode.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6485 8ced0084-cf51-0410-be5f-012b33b47a6e
- Speed up MSAA by using custom resolve shaders instead of ID3D11DeviceContext::ResolveSubresource().
- Fix EFB access when MSAA is enabled.
- Implement the "force linear filtering" option.
- Compile shaders using shader model 4.1 or 5.0 if available.
- Some minor cleanups.
Who cares about DX9 and OGL anyway :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6481 8ced0084-cf51-0410-be5f-012b33b47a6e
DX11: Fix a DX11 debug runtime error caused by the vertex shader output signature and the pixel shader input signature not matching if per-pixel lighting is disabled. Someone forgot disabling those pixel shader parameters ;P
DX11: Enable use of dynamic textures wherever possible.
DX9: Remove two unnecessary TODOs. Someone forgot removing those since they've been obsolete for a long time ;P
Anyway, at least working mipmaps and dynamic textures should increase DX11 performance a bit. And "a bit" is more than my usual "marginally" ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6473 8ced0084-cf51-0410-be5f-012b33b47a6e
* revert back to proper upscale mantissa of parameters A and C
* properly downscale magnitude to 0.24 bits instead than ≡0.23
* Z Eyespace conversion for projection by original patent concept
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6463 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add some info about a backend's feature set (MSAA, Real XFB, EFB to RAM, ..) to VideoConfig
- Gray out options if they aren't supported by the backend or if changing them doesn't affect anything (e.g. changing STC mode if STC is disabled)
- Allow signed bytes for D3D11. Not sure if this causes glitches, but it should work
- Call wxEvent.Skip() in the event function handlers, not sure if this fixes any bugs but the old code definitely caused bugs during development of this patch
- Fix a memory leak in the configuration dialog if D3D11 is used
- Other minor stuff that doesn't need to be mentioned or which I forgot
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6450 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added an option to explicitly disable building with MPG framedumps. To use it add -DENCODE_FRAMEDUMPS=OFF to cmake on the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6429 8ced0084-cf51-0410-be5f-012b33b47a6e
Add a version check for avcodec and swscale libraries.
Fix a bug in the xlib wiimote emulation button configuration. If you are using a mouse button for wiimote emulation you may need to adjust your settings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6426 8ced0084-cf51-0410-be5f-012b33b47a6e
a little bugfix in vertex loading and some fixes.
not much time to work these days but at least i can spend a little time fixing thing.
please test for regressions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6409 8ced0084-cf51-0410-be5f-012b33b47a6e
DX9: When clearing the back buffer in Renderer::Swap(), use IDirect3DDevice9::Clear instead of a clear quad if possible. Should improve performance marginally.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6373 8ced0084-cf51-0410-be5f-012b33b47a6e
Also some general clean up of the main CMakeLists.txt file. I think it is nice to keep the checks and analysis of the results together.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6363 8ced0084-cf51-0410-be5f-012b33b47a6e
Not sure how to fix Dolphins hotkeys when 3D Vision is enabled (I do know a way, but it's messy and I don't want 3D Vision messing with Dolphin's cleanliness).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6362 8ced0084-cf51-0410-be5f-012b33b47a6e
The finding was that 99% of the time, textures are static in memory. However, Dolphin would pessimistically continue to decode and copy the same texture every time. The optimisation is to check if the texture matches what is in the cache, and if it does, Dolphin should early exit.
The result is the speed in New Super Mario Bros Wii increased 35% with spinning coins. Still not as fast as EFB copy to texture though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6352 8ced0084-cf51-0410-be5f-012b33b47a6e
Note that most users will want to use the release build to get a -O3 optimized build. This can be enabled by adding "-D CMAKE_BUILD_TYPE=Release".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6344 8ced0084-cf51-0410-be5f-012b33b47a6e
Some notes about this:
- config.h doesn't get written yet, so you'll have to use one generated by SCons
- dependency checking isn't really implemented, yet. Just some basic checks for OpenGL or ALSA, we need something more sophisticated though.
- the OpenGL plugin fails to load for some reason which I can't debug right now due to the libc debuginfo package version in openSUSE not matching the runtime packages
- there's even some support for generating install packages (rpm/deb/.. packages, NSIS installer, etc). It doesn't work properly right now though, since some paths seem to be hardcoded into Dolphin's source
- probably lots of other stuff I forgot... Just take a look at all the TODOs in the CMakeLists.txt files for more information ;P
Additionally, I added various files to the svn:ignore list.
tl;dr: Unless you are a dev or you're building binary packages, this commit shouldn't bother you :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6326 8ced0084-cf51-0410-be5f-012b33b47a6e
Upon texture reloading, the cache entry hash wasn't updated and thus we effectively disabled any texture caching in that case.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6308 8ced0084-cf51-0410-be5f-012b33b47a6e
Games affected by this change: Mario Smash Football, Mario Strikers Charged Football, Monster Hunter Tri.
Other games possibly affected: Shaun White Snowboarding, Resident Evil Code: Veronica, Baten Kaitos.
This implementation will decrease performance if the game uses this feature, but the glitches will be gone. I'll add an option for this in a later commit. EFB pokes are somewhat slow in DX11 right now, speed should be okayish in DX9 though.
Other changes:
- SOMEWHAT cleaned up the EFB access code in DX9
- Fixed incompatible parameter list of AccessEFB and TVideo_AccessEFB.
- Fixed a theoretical bug in ReplaceRGBATexture2D, add support for STAGING textures
- Removed unused parameters in various DX9 functions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6300 8ced0084-cf51-0410-be5f-012b33b47a6e
Now, there are two:
Real dimensions: Width and height of the original GameCube texture
Virtual dimensions: Width and height of the texture used by dolphin-emu's renderer
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6291 8ced0084-cf51-0410-be5f-012b33b47a6e
Work around different gcc versions giving conflicting warnings
about signed/unsigned comparisons involving bit fields.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6290 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed EFB Scale to Internal Resolution.
Removed Auto Scale option (it is now always on).
Added on-the-fly changing of the Internal Resolution in the OpenGL and Direct3D9 plug-ins.
Further consolidated the code in the video plug-ins.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6240 8ced0084-cf51-0410-be5f-012b33b47a6e
final rendering of (at least) Sonic Unleashed.
This should be (nearly) invisible in Z16 depth copies and in games, but there is
some chance that it collides with other such border cases. There probably is some
room to decrease the adjustment but 9999999/10000000 is not enough. A static offset
may be an option, too. I don't know if the game can/does set something like that.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6225 8ced0084-cf51-0410-be5f-012b33b47a6e
for all the plugins implemented per pixel lighting, this will make games that uses lighting a lot nice. (just look at mario sunshine and compare :))
for dx9: implemented temporal anaglyph stereo: just grab your red-cyan glasses and enjoy.
stereo calibration: use stereo separation ( distance of the point from you are looking) and Focal Angle: the angle necessary to focus in one particular object.
this settings are different in every games as they use different depth ranges.
please for any regression and bug introduced by this commit.
if you ask why i did not implement stereo in dx11 and opengl the reason is one: they don't work right when i have more time will try to find a way to make them work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6224 8ced0084-cf51-0410-be5f-012b33b47a6e
Main Issues:
DX11 is functional with a ~2MB/s mem leak.
OpenGL/DirectX9 have a black display while game runs. (DirectX 9 flashes good display on emulation stop)
Too many virtual function calls. (once everything is working, I will work on removing them)
Won't build on non-Windows in its current state. (mainly EmuWindow will need changes for Linux/OS X)
Probably other stuff.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6219 8ced0084-cf51-0410-be5f-012b33b47a6e
include referenced array data in the hash to avoid problems in some games.
this version is a slower than the last version but is more stable, still much work to do but so little time to do it :)
Added Dlist Caching Option to the plugin configuration so anyone can compare the performance change.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6205 8ced0084-cf51-0410-be5f-012b33b47a6e
still experimental, not totally optimized but must bring a nice speed up
please test for regressions an error. an please Linux people fix scons :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6149 8ced0084-cf51-0410-be5f-012b33b47a6e
use plain vertex arrays instead of VBOs to render in Opengl plugin as the nature of the data make VBOs slower. This must bring, depending on the implementation, a good speedup in opengl.
in my system now opengl and d3d9 have a difference of 1 to 5 fps depending of the game.
some cleanup and a little work pointing to future improvements in the way of rendering.
please test and check for any errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6139 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed one of the last graphic problems in smg, now the glow in the plants and planets must be correct.
the error was caused by a error in lighting calculations. so it must affect other games.
please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6103 8ced0084-cf51-0410-be5f-012b33b47a6e
Really that happens because the fifo.CPReadWriteDistance is negative.
Example: CPReadWriteDistance: -864 CPEnd: 10092672 fifo.CPBase: 9568416
In SMG this is because PI_FIFO_RESET is writing and after fifo.CPReadWriteDistance will be setted to 0.
To Prevent that, I've Implemented AbortFrame function in the CommmandProcessor. It should fix overflown because of that.
Note: There is other issue (Issue 2846) where the fifo.CPReadWriteDistance is negative too but the effect is different.
I'm working to solve this.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6083 8ced0084-cf51-0410-be5f-012b33b47a6e
I am not sure i am understanding what the pipeline really does, and more so what
the GC/WII expects here. If my comments are incorrect, please let me know.
This was tested with MP2:E, ZWW on r6075.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6078 8ced0084-cf51-0410-be5f-012b33b47a6e
Remove a member variable which I introduced in r5907 although it never actually got used. Restores binary compatibility (at least in that regard) to pre-r5907 video plugins, but breaks any binaries after that :P
Update FIFO watermark tightness recommendations. 1000 is quite a high value I guess, but some people seem to need it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6060 8ced0084-cf51-0410-be5f-012b33b47a6e
The code changes disable the usual pipeline flush for certain BP Writes that occur while the minimap is being drawn in Zelda: twilight princess. This significantly increases speed while in hyrule field. The way this is accomplished is described more in depth on page 42 of Xtreme's thread. Big thanks to Xtreme for doing a great job hosting that thread, and Kiesel-stein for initial work on the hack
Also, I used the resource editor in Visual studio to generate the GUI code for the DX11 plugin, and some code appeared to be removed, although the behavior of the GUI did not seem to change. Hopefully someone more experienced with resource files (forms?) can double check that no code was damaged
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6057 8ced0084-cf51-0410-be5f-012b33b47a6e
(those originating from a thread other than the gpu thread)
glxMakeCurrent is supposed to error out when the context is
still current in another thread. NVIDIA handles that, but mesa3d errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6054 8ced0084-cf51-0410-be5f-012b33b47a6e
The GCC model for extended instructions like these is that you compile
with -msse3 etc. These affect code generation for whole compilation units,
so the idea is that you have a separate .c file for each instruction set
class and then indirect to the desired one at runtime.
Without e.g. -msse4.1, the GCC built-ins used by <foointrin.h> are not
available. However, in our specific case of compiling with -msse2 and
wanting to use SSE3.1 code, enough built-ins are available that we only
need to provide a little hack for pshufb.
Upgrading this to also use SSE4.1 instructions doesn't appear feasible
without a lot of undesirable duplication of GCC built-in functions and
headers, so we'd probably have to move to the GCC model of separate
source files for that.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6014 8ced0084-cf51-0410-be5f-012b33b47a6e
is required to correctly link with C++ libraries like wxw.
Tell OS X that the user is doing something when using the wiimote
so that the screensaver doesn't come on when playing a Wii game.
Replace unnecessary floating point with integer math.
Remove unnecessary <sys/stat.h>'s.
Correct a few type nits.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5995 8ced0084-cf51-0410-be5f-012b33b47a6e
This is EXPERIMENTAL, in theory don't break any game but if so Revert this commit immediately please.
Note: Beside Eternal Darkness needs DirectX 11 or DirectX 9 with Zelda Hack to works fine.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5986 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
To change it, right click the affected game in the iso list, select Properties, and enter some constant for "Watermark tightness". Reasonable values range from 20 to 200.
FIFO seems unoverflowable on my computer no matter what I set this value to, so test whether tuning the value helps you ;P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5907 8ced0084-cf51-0410-be5f-012b33b47a6e
- fix numerous warnings
- make some variables unsigned
- remove redundant code and header inclusions
- make code more compact in lots of cases
Committing some additional changes by myself:
- additional header cleanups
- cleanup DX11 initialization/shutdown process (hinted at by avindra)
- Remove the cgD3D9 stuff from Externals since it's no longer needed
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5903 8ced0084-cf51-0410-be5f-012b33b47a6e
Because we only ever call Pos_ReadDirect (and through that, DataRead<T>)
from JIT generated code, the compiler may not get the heads-up to properly
prepare for run-time instantiation of those template functions.
Explicitly instantiating Pos_ReadDirect gets around that issue.
Also force DataRead* inline as gcc didn't always do that itself when the
DataRead functions in turn were called from (other) template functions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5902 8ced0084-cf51-0410-be5f-012b33b47a6e
from JIT generated code, the compiler may not get the heads-up to properly
prepare for run-time instantiation of those template functions.
Explicitly instantiating Pos_ReadDirect gets around that issue.
Also force DataRead* inline as gcc didn't always do that itself when the
DataRead functions in turn were called from (other) template functions.
I am far from a C++ language lawyer, so I cannot speak learnedly about the
correctness of this solution, but it works.
Dolphin.app built on OS X 10.6 now actually works on 10.5 as well.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5901 8ced0084-cf51-0410-be5f-012b33b47a6e
- Eliminate the useless check for cpu modifications option from efb to ram as it must be enabled always
- use constant names in dx11 for buffer length calculation instead to simplify code reading
- implemented scaled efb copy in opengl, still bugy in some games, the option is not in the gui but will add it when it works perfect
- Change the depth calculation behavior:
if the game use z textures is exactly the same as before.
if the game do not use z texture calculate z values in the vertex shader. the advantage id this approach is that early z culling is applied,
improving fill rate. this mus speed up things, even with ssaa and msaa enabled.
please test for regression and enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5896 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented new efb to ram in opengl
modified TextureConversionShader preparing the implementation of new efb to ram in dx11
please test for regressions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5874 8ced0084-cf51-0410-be5f-012b33b47a6e
fix frame dumping and screenshots in d3d9 and opengl
some improvements to the new efb to ram
please test to see if the issues introduced by the new efb to ram are solved by this commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5862 8ced0084-cf51-0410-be5f-012b33b47a6e
replace efb to ram implementation by a hybrid approach.
explanation:
when copying from efb to texture, instead of make a copy to a texture or to the ram, copy the data to both, in hi quality to the texture and in native quality to the ram.
then instead of re-decoding the data from ram (very slow) use the data in the texture.
to improve this even more, test if the cpu has modified the data in the ram copy, if so, update the texture in memory and mark it as dynamic to avoid redundant work in future frames.
having all this implemented this is what is archived:
sms: full quality with scaled efb copies and fully functional goop cleaning :)
ztp: efb to texture speed with full map support.
nsmbw: this is a hard to emulate game, as it make a lot of shading and texture modification in cpu. it only have 35 fps in my system with new efb to ram but is 10 fps faster than normal efb to ram.
this game also show me another unimplemented feature, copy efb to multiple textures at the same time (is used to animate coins and other things in the world).
this is a remaining todo in efb to texture.
a lot of games should improve, so please test and let me know any regresion caused by this commit.
if everyone likes this the next step is, implement efb to multilpe textures and merge efb to ram and efb to texture.
then port to the other plugins.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5846 8ced0084-cf51-0410-be5f-012b33b47a6e
return to the old values in constants in pixelshader, the old values give mi 3 or 4 fps more,(maybe some kind of compiler optimization) in some games and with the current algorithm i notice no difference with this values, please report any problem.
optimizes SSAA to make it a little faster and, the quality should be the same but with a little speedup.
change the way the frame is processed depending is xfb is enabled or not to make this a little faster.
please test and report any problem
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5820 8ced0084-cf51-0410-be5f-012b33b47a6e
1 - Optimize pixelshadergen to avoid redundant register overflow math, with this if a game don't need this will be not applied.
this must bring some fill rate back and improve speed a little in fill rate limited systems.
2- some corrections to vertexshadergen to avoid uninitialized texture coordinates, dono if is the correct way to fix it but t least it will make house of the dead overkill playable in dx11.
the bad thing: still missing geometri in dx9, in dx11 it works exactly as on opengl.
3 - some optimization made to improve fps a little wih the latests changes made to fifo.
* back to the original code in beginfield as now it will work right.
* check for efb access more often as a lot of time is lost waiting for efb access
4 - apply a little fix for missing textures in nvidia opengl tanks to Wagnard28 for finding that nvidia does not like invalid shader id :)
please test for any regression
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5812 8ced0084-cf51-0410-be5f-012b33b47a6e
If compilation fails, rebuild the whole solution as Visual Studio struggles with the not so complex project dependencies.
ATI users still need to install the Stream SDK as it's the only way to have an OpenCL driver.
NVidia users just have to install a recent driver (version 197 is tested and working).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5808 8ced0084-cf51-0410-be5f-012b33b47a6e
Dual Core sync fix.
When the FIFO is processing data we must not advance the cpu cycles in CoreTiming because in this way the VI will be desynchronized. So, We are waiting until the FIFO finish and while we process only the events required by the FIFO.
This should fix Issue 2072 .
This affect to all games in dual core mode.
Please, You can test all games with VPS limiter auto, 60, 50 depending of the game and compare with prev revision.
For example now NSMB in the video Intro has 60 fps (prev 30 fps) :D or SMG does't need anymore FPS Limitter Hack to get 55-60 fps
Beside the slowdowns now are more softly and the fps more stables because the VI sync is almost perfect.
The Core Timing and Fifo modifications are delicated. Please report if this hang any game. Don't forget check with prev revision.
Enjoy it! Thanks to Rodolfo for teach me all about dolphin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5777 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the decoder codepath when OpenCL is enabled and the DX11 plugin is used.
Added the DX11 plugin to the Dolphin project dependencies.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5764 8ced0084-cf51-0410-be5f-012b33b47a6e
Rodolfo Osvaldo Bogado