In PPCTables.cpp, the code is currently unused so I was unable to test it.
In CustomPipeline.cpp, a pointer to member function cannot be used due to 16.4.5.2.1 of the C++ Standard regarding "addressable functions". https://eel.is/c++draft/namespace.std#6
In Fs.cpp and DirectoryBlob.cpp, these examples used projections in a previous iteration of this commit, but no longer do. Still, they remain in this commit because the PR they would actually belong to is already merged.
In LabelMap.cpp, the code is currently unused so I was unable to test it.
In WiiUtils.cpp, the magic value `1u` was replaced by the constant value `DiscIO::PARTITION_UPDATE`.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,bufferin,clen,collet,datas,delt,fpr,inout,inport,interm,pixelx,re-use,re-used,sav,stateman,strat,wil`
Clamp overlays to the render window (with some padding), reset their
positions when the render window changes sizes, and add a setting to
enable moving the overlays (off by default, .ini only for now).
This adds the option to configure real Wiimotes by specifying their Bluetooth addresses in
the configuration file. This allows off-brand Wiimotes to work without using the
Bluetooth Passthrough option, if you know their Bluetooth addresses beforehand.
Despite correctly setting the LAP to `0x9e8b00` in `WiimoteScannerLinux::FindWiimotes`
while scanning, which is indeed enough to make off-brand / knock-off Wiimotes respond to a
Bluetooth Inquiry, some (several? all?) bluetooth adapters seem to override and ignore
this given LAP value when performing the Inquiry, and actually use the `0x9e8b33` value as
if a null pointer have been given to `hci_inquiry`, as inspection of USB/Bluetooth packets
by Wireshark indicate. Off-brand Wiimotes don't respond to inquiries with this LAP.
If one happens to know the Bluetooth address of their Wiimote (for example, by checking
`BluetoothPassthrough.LinkKeys` after using Bluetooth Passthrough, or other means such as
directly using `libusb` to force the adapter to use the correct LAP in the Inquiry), then
it's enough to add those addresses to the vector of found Wiimotes.
Since this a niche use case and I only happen to know and have tested in Linux, this
change only affects the `WiimoteScannerLinux` backend. It's likely that it could be added
to other backends, but I'm unfamiliar with these.
If no addresses are given or this config section does not exist, behavior is completely
unchanged.
Introduce a new "Enable Time Tracking" checkbox in the InterfacePane UI. The checkbox is dynamically enabled or disabled based on the emulation state, preventing changes while emulation is active.
Creates TimePlayed class and implemented constructors, AddTime, GetTimePlayed, and Reload methods. Updates CMakeLists.txt and DolphinLib.props as appropriate.
I think someone confused these with the actual token and bounding box
registers in PE, which were added later. In CP they never did anything
and it's suspicious that they have the same addresses as their PE
counterparts. On real hardware they always read as zero.
Move ImGui::End() calls out of if(ImGui::Begin()) blocks.
Quoting from ImGui::Begin's function comment in imgui.cpp:
"You always need to call ImGui::End() even if false is returned."
In practice this didn't cause problems because the windows don't have
title bars and thus can't be collapsed, and so the block containing
::End would always run, but let's do it the right way.
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
We exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00218 mov w24, #0x100000 ; =1048576
0xcb180379 sub x25, x27, x24
After:
0xd1440379 sub x25, x27, #0x100, lsl #12 ; =0x100000
You can encode a 12-bit immediate in a SUB instruction on ARM64. We can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x5280003a mov w26, #0x1 ; =1
0xcb1a033b sub x27, x25, x26
After:
0xd100073b sub x27, x25, #0x1
While we cannot always avoid materializing immediates, we can still
inspect the most significant bit and potentially skip sign extension.
This can sometimes save an instruction.
Before:
0x5280003a mov w26, #0x1 ; =1
0x93407f5b sxtw x27, w26
0xcb38c37b sub x27, x27, w24, sxtw
After:
0x5280003a mov w26, #0x1 ; =1
0xcb38c35b sub x27, x26, w24, sxtw
Before:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb38c339 sub x25, x25, w24, sxtw
After:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb180339 sub x25, x25, x24
You can encode a shifted 12-bit immediate in an ADD instruction on
ARM64. If the negated constant fits in this range, we can exploit this
to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52bff01a mov w26, #-0x800000 ; =-8388608
0x93407f1b sxtw x27, w24
0xcb3ac37b sub x27, x27, w26, sxtw
After:
0x93407f1b sxtw x27, w24
0x9160037b add x27, x27, #0x800, lsl #12 ; =0x800000
You can encode a 12-bit immediate in an ADD instruction on ARM64. If the
negated constant fits in this range, we can exploit this to avoid
materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x12800019 mov w25, #-0x1 ; =-1
0x93407f5b sxtw x27, w26
0xcb39c37b sub x27, x27, w25, sxtw
After:
0x93407f5b sxtw x27, w26
0x9100077b add x27, x27, #0x1
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00099 mov w25, #0x40000 ; =262144
0x93407f7a sxtw x26, w27
0xcb39c35a sub x26, x26, w25, sxtw
After:
0x93407f7a sxtw x26, w27
0xd141035a sub x26, x26, #0x40, lsl #12 ; =0x40000
You can encode a 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52800416 mov w22, #0x20 ; =32
0x93407f78 sxtw x24, w27
0xcb36c318 sub x24, x24, w22, sxtw
After:
0x93407f78 sxtw x24, w27
0xd1008318 sub x24, x24, #0x20
A number of settings in the `debugger` group were wrongly using a newly
constructed `QSettings` object instead of the singleton object that
`GetQSettings()` provides.
This made the application create a spurious, extra configuration file in
the user directory:
```
~/.config/Dolphin Emulator/dolphin-emu.conf
```
Notice that, by default, the application configuration files are stored
in `~/.config/dolphin-emu`; not in `~/.config/Dolphin Emulator`.
Adding a community-requested list of Gecko and Action Replay codes to the allowlist. Many of these codes were from the wiki and are being added to Dolphin's repo for the first time.
Change the displayed controls in the TAS Input window when the
controller's extension (including MotionPlus) is changed.
This previously required restarting Dolphin after the attachment was
changed, as the controls were never updated after the WiiTASInputWindow
was created at Dolphin startup.
When I wrote 71e9766519, there was an interaction I didn't take into
account: When setting eq, SetCRFieldBit assumes that all bits in the
passed-in host register except the least significant bit are 0. But if
we use EON or ORN, all bits except the least significant bit get set to
1. This can cause eq to end up unset when it should be set.
This commit fixes the issue.
crandc is unaffected by the issue because the "1" bits get ANDed with
"0" bits from the first operand.
Note that in practice, we never have both bits_1_to_31_are_set and
negate at once, so while it looks like this commit adds an extra AND
instruction in some cases, those cases don't happen in practice, meaning
this fix shouldn't affect performance.
QCheckBox::toggled and other similar signals are used to save changes and to update widget status (such as enabled).. OnConfigChanged needs to load new values and trigger widget updates, but the new value shouldn't trigger a save. A save is unnecessary (the config has the correct values and the UI is being updated to those values) and it'd trigger another ConfigChanged signal. This commit blocks the save without blocking the signal entirely.
The computed value is only used when the register is equal to zero, so
we can fully precompute it and materialize the constant instead. In
other words, we change from
```
return reg == 0 ? (reg | 1ULL << 63) : reg;
```
to
```
return reg == 0 ? 1ULL << 63 : reg;
```
The number of instructions remains the same, but we eliminate an
unnecessary dependency on the register value.
Before:
0xb241037a orr x26, x27, #0x8000000000000000
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
After:
0xd2f0001a mov x26, #-0x8000000000000000 ; =-9223372036854775808
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
In NandPaths.cpp, the `std::initializer_list<char>` of illegal characters has been turned into a `char[]` (similar to the one in GameList.cpp).
The reverse iteration in ResourcePack.cpp seemed to provide no benefits, and doing without it it seemed to have no ill effects.
The new `Common::Contains` and `Common::ContainsSubrange` function objects mirror C++23's `std::ranges::contains` and `std::ranges::contains_subrange`, respectively.
Recently there was some issues in TASVideos trying to sync a Donkey Kong Country Returns TAS. It eventually was synced by directly using the config from the TAS author. The exact setting which caused the desync was narrowed down to being in SYSCONF, with the country code. The TAS author lives in the US, so the country code matched the US country code, while the person attempting to sync the TAS did not live in the US.
Adding SYSCONF country code to the DTM should avoid this being an issue for future Dolphin versions.
When the input register and carry flags are known, we can always
precompute the result.
We still materialize the immediate when the condition register
needs to be updated, but this seems to be a general problem. I might
look into that one day, but for now this'll do.
- ConstantFalse
Before:
0x52800119 mov w25, #0x8 ; =8
0x2a1903fa mov w26, w25
After:
N/A
- ConstantTrue
Before:
0x52800119 mov w25, #0x8 ; =8
0x1100073a add w26, w25, #0x1
After:
N/A
Same optimization we did for subfex. Skip loading the carry flag into a
temporary register first when we're dealing with zero.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
When both the input register and the carry flag are constants, the
result can be precomputed.
Before:
0x52800016 mov w22, #0x0 ; =0
0x2a3603f6 mvn w22, w22
After:
The result is either -1 or 0 depending on the state of the carry flag.
This can be done with a csetm instruction.
Before:
0x1280001a mov w26, #-0x1 ; =-1
0x1a1f035a adc w26, w26, wzr
After:
0x5a9f23fa csetm w26, lo
When the immediate is zero, we can load the carry flag from memory
directly to the destination register.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
Resolves duplicate OSD messages for Loading and Found custom textures.
VideoBackend initialization results in HiresTexture::Init being called.
We already call HiresTexture::Update when OnNewTitleLoad is called.
Thus we can remove HiresTextures::Init completely as it is redundant.
All valid PPC imm masks (except for all zeroes and all ones) are also
valid AArch64 imm masks. This lets us optimize things a little.
Note that because I'm now ANDing rS before rotating it, its AND mask
is rotated left. All AArch64 imm masks can be rotated by any amount and
still be valid AArch64 imm masks.
No games seem to use this, so this isn't useful as a performance
optimization, but it's required for correctness because the (sh == 0)
case of our implementation doesn't handle zero masks.
In JitRegCache.cpp, the lambda predicate were replaced by a pointer to member function because ranges algorithms are able to invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In BoundingBox.cpp, the lambda predicate was returning the bool element unchanged, so `std::identity` was a better fit.
In WiimoteReal.cpp, JitRegCache.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In DITSpecification.cpp, MaterialAsset.cpp, and ShaderAsset.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In NetPlayClient.cpp, the non-trivial `NetPlay::Player` elements were being passed by value in `NetPlayClient::DoAllPlayersHaveGame()`. This has been fixed.
In WIABlob.cpp, the second example's predicate was returning the `std::optional` by value instead of implicitly converting it to a bool. This has been fixed.
Creates a layer outside the game config layer system and passes it to the created gfx widows, so as to not interfere with the global config system.
Supports multiple game properties being open at once.
Supports editing while a game is playing, but the options only save and update the active game when the window is closed.
Right-clicking will remove a property from the game ini.
Prefer BLENDVPD over VBLENDVPD if the latter doesn't save any
instructions.
VBLENDVPD allows separate source and destination registers, which can
eliminate a MOVAPD/MOVSD. However, on Intel since Skylake, VBLENDVPD
takes additional uops to execute compared to BLENDVPD (according to
https://uops.info). On AMD and older Intel microarchitectures there is no
difference.
Some generators (like Unix Makefiles and Xcode) copy an app's Info.plist at configure time.
This causes a problem when we need to generate the Info.plist at build time, like how we
currently do it with ScmRevGen. Instead of generating the Info.plist directly in ScmRevGen,
provide an Info.plist without any version information to CMake at configure time, have
ScmRevGen generate a separate plist file with the version information at build time, and
then merge the two together to create the final Info.plist.
The read thread could call Reset, which in turn tried to join the read
thread, leading to a SIGABRT. This manifested as Dolphin consistently
crashing when disconnecting a GC adapter and having a chance of crashing
a few seconds after connecting a GC adapter.
Now that patches and codes are enabled on a case by case basis, remove patcher code blocking codes entirely in hardcore mode, and reword the warning to be more accurate.
This apparently didn't compile on macOS six years ago before c++20, but
it should be fine by now.
While I'm at it, make the constants upper case per convention.
If the host is in hardcore mode, all joining players will be set to hardcore mode; if not, all joining players will be set to softcore. This ensures all players have the same settings and remain synchroized.
The primary focus of this PR is the Eternal Darkness patch which fixes hanging at startup, which prior to this fix makes Eternal Darkness unplayable in hardcore. The MHTri patch was added as well simply because it could be.
GXAbortFrame() is problematic for Dolphin because it first writes
PI_FIFO_RESET (for which we discard our internal fifo), then disables CP
reads (for which we execute pending commands in the GP fifo in emulated
memory). I don't know whether there is a race condition on hardware, but
there is one for us. Avoid this by also doing a GPU sync here.
The value being stored must be loaded into a register. In the case of an
immediate value, this means it must be materialized. The value is
eventually byteswapped before performing the store.
This can be simplified for the value 0 for two reasons:
- ARM64 has a dedicated zero register, so does not need to be
materialized.
- Byteswapping zero is still zero, so we can skip this step.
We could skip byteswapping for other values by immediately materializing
the byteswapped value in a register, but the benefits are not so clear
there (if the value needs to be materialized anyway, it is better to do
it up front).
Before:
0x5280001b mov w27, #0x0 ; =0
0xb9404fba ldr w26, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020342 add w2, w26, w2
0x5ac00b61 rev w1, w27
0xb8226b81 str w1, [x28, x2]
After:
0xb9404fbb ldr w27, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020362 add w2, w27, w2
0xb8226b9f str wzr, [x28, x2]
Unlike on x64, inverting EQ or GT in SetCRFieldBit saves us one
instruction. Also unlike on x64, inverting SO or LT in GetCRFieldBit
requires an extra instruction (just like in SetCRFieldBit). Due to this,
replacing an invert in GetCRFieldBit with an invert in SetCRFieldBit
when possible is either equally good or better - never worse.
MUL and SUB can be combined in one instruction.
Before:
0x1b1a7c01 mul w1, w0, w26
0x4b010318 sub w24, w24, w1
After:
0x1b1ae018 msub w24, w0, w26, w24
Makes Graphics -> Hacks -> Skip EFB Access from CPU enabled by default. Some GPU drivers stall when EFB access occurs in games where EFB is not used. Most games that require this setting set to 'true' already have this defined in their game inis.
`std::erase` is a replacement for the remove-erase idiom.
Changes to `OpenModeToAndroid` inadvertently revealed that the prior implementation had UB (potentially deleting the end iterator). This is now fixed.
Three bugs specific to older Wii games:
- The size difference between high-pass and biquad filter was not
accounted for, causing wiimote related fields to be corrupted.
- Wiimote sample buffer pointers were advanced by 32 samples per
millisecond instead of 6 samples. Usually hidden by the first bug.
- PB updates on Wii were being byte-swapped twice, but I've not actually
found any Wii games that make use of PB updates.
This fixes wiimote audio in at least the following games:
- Excite Truck
- Ice Age 2: The Meltdown
- Kororinpa: Marble Mania
- Rapala Tournament Fishing
- Shrek the Third
- Super Monkey Ball: Banana Blitz
- Tiger Woods PGA Tour 07
- WarioWare: Smooth Moves (issue 11725)
- Wing Island
Fixes LIT (https://bugs.dolphin-emu.org/issues/13635). The text does not include normals, but has lighting enabled. With the previous default of (0, 0, 0), lighting was always black (as dot(X, (0, 0, 0)) is always 0). It seems like the normal from the map in the background (0, 0, 1) is re-used.
LIT also has the vertex color enabled while vertex color is not specified, the same as SMS's debug cubes; the default MissingColorValue GameINI value of solid white seems to work correctly in this case.
No need to materialize the immediate if it is zero, we can just use WZR.
Before:
mov w27, #0x0 ; =0
str w27, [x29, #0x1178]
After:
str wzr, [x29, #0x1178]
In VolumeVerifier.cpp, constructing a `std::string_view` of the volume's GameID is unnecessary, as `std::`(`ranges::`)`binary_search` supports heterogeneous lookup. The usage in GameFile.cpp is a perfect example.
In OGLConfig.cpp, `std::views::reverse` is used rather than sorting using `std::ranges::greater` in order to parallel other instances of reverse iteration in the function.
In DSPCore.cpp, there were two `std::fill` uses that could be simplified using `std::fill_n`. Due to their proximity with other `std::fill` algorithms being modernized with ranges, I chose to make these examples into the rare `std::ranges::fill_n`.
In StringUtil.h, the lambdas wrapping `Common::ToLower(char)` and `Common::ToUpper(char)` were only necessary due to the function names being overloaded.
Many games call GXSetGPFifo() without first waiting for the GP to finish
consuming outstanding commands in the previous GP fifo. Normally,
Dolphin runs OpcodeDecoding in 1000-cycle time slices. In that time
frame, GXSetGPFifo() has probably completed and the GP read pointer now
points to entirely new memory. If the last GP fifo copy ended in an
incomplete command, the new GP fifo would most likely desync for a
while. To avoid all this, give the GP a time slice right now to copy the
remaining data from the previous GP fifo.
Indexed XF loads specify the number of 32-bit words (generally floats, but light data has some integers) to load, not the number of bytes. This was only a mistake in the fifo analyzer text; the actual implementation already loaded words.
The light LIT fifolog from https://bugs.dolphin-emu.org/issues/13635 has position data at physical address 11ae3180. This works fine when using the memory viewer in physical mode, but the corresponding virtual address (91ae3180) previously didn't show anything in effective mode. It works fine now though.
This shouldn't affect playback of fifologs as everything in there uses physical addresses; this only impacts the memory viewer.
This logic was copied from CBoot::SetupBAT.
This reverts the revert commit bc67fc97c3,
except for the changes in BaseConfigLoader.cpp, which caused the bug
that made us revert 72cf2bdb87. PR 12917
contains an improved change to BaseConfigLoader.cpp, which can be merged
(or rejected) independently.
A few changes have also been made based on review comments.
Found this bug while testing; if I manually edit the config files while Dolphin is closed I was able to get debug and hardcore on at the same time, this resolves that.
AchievementManager::SetHardcoreMode now handles the (non-Qt) settings disabled by hardcore mode, instead of doing this on the Qt layer. Also ensured Init/Enable Achievements paths run this code, fixing the bug wherein the player can manipulate things when achievements are disabled that persist when turned back on.
Prevent potential issues when creating the Graphics window (and thus
calling PopulateBackendInfo) while the core state is Stopping, like we
already do while it's Starting or Running.
Remove the PopulateBackendInfoFromUI function, which had a single caller
(GraphicsWindow::OnBackendChanged) and checked that the core wasn't
running or starting before calling PopulateBackendInfo.
Move the core state check into PopulateBackendInfo and have
OnBackendChanged call that instead. This guarantees the check is
performed by all callers of PopulateBackendInfo, preventing
potential reintroduction of the crash fixed in 3d4ae63f if another call
to PopulateBackendInfo is added.
As of the previous commit the only other caller of PopulateBackendInfo
is Core::Init shortly before s_state is set to Starting, so it will
always pass the check and so maintain its current behavior.
Remove the second of two calls to PopulateBackendInfo during emulation
startup. This call was originally the only one, but b214e0e added an
earlier call to handle the backend being changed by the GameINI.
The PR discussion doesn't explain why the original call was left in; I
suspect it was just overlooked.
As a bonus, this removes one of the extra copies of the "Video Info" On
Screen Display message at startup when using OpenGL.
Fix a crash when opening the Graphics window for the first time during
emulation startup when the backend is Vulkan, D3D11, or D3D12.
Don't call PopulateBackendInfo() from the Host thread when the core is
starting up. First, the function has already been called in Core::Init()
so we don't need to again. More importantly, PopulateBackendInfo() calls
g_video_backend->InitBackendInfo(), and the Vulkan and D3D
implementations of those functions load and then unload libraries (and
their associated function pointers) which are potentially in use by
other threads.
This crash was reliably reproducible with the following steps:
1) Select an affected backend.
2) Enable "Compile Shaders Before Starting"
3) Delete the cached shaders (but not the .uidcache file) for the game
you're testing.
4) Close and reopen Dolphin.
5) Start the game.
6) While the game is still booting or compiling shaders, open the
Graphics window for the first time in that Dolphin session.
Fixes https://bugs.dolphin-emu.org/issues/13634.
Before, Dolphin would randomly crash when updating the cheat search when automatic refresh was enabled. (Having a large number of addresses listed, e.g. by starting with an "any value" search, may contribute). The crash was due to QTableWidget::item returning nullptr in RefreshGUICurrentValues, presumably due to the table being resized on the UI thread while the emulated CPU thread was updating the values. I've fixed this by pausing the CPU thread for the entirety of OnNextScanClicked; this eliminated crashes in my testing.
With 12 uses of `JoinStrings` in the codebase vs 36 uses of `fmt::join`, fmtlib's range adapter for string concatenation with delimiters is clearly the preferred option.
Migrating `Common::CaseInsensitiveLess` to StringUtil.h will hopefully discourage rolling one's own solution in the future for case-insensitive associative containers when this (quite robust!) solution already exists.
`Common::CaseInsensitiveStringCompare::IsEqual` was removed in favor of using the `Common::CaseInsensitiveEquals` function.
The `a.size() != b.size()` condition in `Common::CaseInsensitiveEquals` can be removed, since `std::ranges::equal` already checks this condition (confirmed in libc++).
There were three distinct mechanisms for signaling breakpoint changes in DolphinQt, and the wiring had room for improvement. The behavior of these signals has been consolidated into the new `Host::PPCBreakpointsChanged` signal, which can be emitted from anywhere in DolphinQt to properly update breakpoints everywhere in DolphinQt.
This improves a few things:
- For the `CodeViewWidget` and `MemoryViewWidget`, signals no longer need to propagate through the `CodeWidget` and `MemoryWidget` (respectively) to reach their destination (incoming or outgoing).
- For the `BreakpointWidget`, by self-triggering from its own signal, it no longer must manually call `Update()` after all of the emission sites.
- For the `BranchWatchDialog`, it now has one less thing it must go through the `CodeWidget` for, which is a plus.
If texture dumping is enabled, notify the user on emulation startup
using an On Screen Display message.
Also notify the user when texture dumping is toggled.
Addresses https://bugs.dolphin-emu.org/issues/12445.
The low-pass and biquad filters run in set40 mode where accessing ac#.m
returns the value of ac#.hm clamped to 16 bits.
This fixes the crackling in "Need for Speed: Nitro" (issue 13610).
Also make the lower bound match hardware (-0x8000 instead of -0x7FFF).
During 25-bit rounding, subnormals are "normalized"
This would normally mean that the exponent needs to be able to be <-1023
Instead, you can modify at what bit you round and get the same results!
This is done by finding the highest bit and shifting right the round bit
Co-Authored-By: JosJuice <josjuice@gmail.com>
Changes integer rounding to more closely meet the documentation
The documentation explains to round before doing any bounds checks
All this really does is make sure some exception bits won't be set wrong
This depends on the rounding mode, fixing cases such as:
- Round to even, (0x7fffffff, 0x7fffffff.8)
- Round to down, (0x7fffffff, 0x80000000)
This change also uses some standard functions for rounding
Previously using them was casting to an s32 directly, now keeps the f64
RoundToIntegerMode introduced due to roundeven not being part of C++17
Finally, it can change a >0x7fffffff to >=0x80000000, done because:
- It looks nicer now with integers (I liked 0s)
- It gives ever so slightly better codegen on Aarch64
Co-Authored-By: JosJuice <josjuice@gmail.com>
I wasn't aware that even with a size of zero, it's still not safe to pass a nullptr to `std::memcpy`. When `CachedInterpreterEmitter::PoisonCallback` is written, UB is happening.
Invert conditions, invert decrement checks, and make conditional branches unconditional. USnapshotMetadata in prior versions of Dolphin is forward-compatible with these changes (tested on x86_64).
Objects which get parented automatically by later processing now pass a nullptr to the constructor to make the intent clearer. Also fixed "true" and "false" not being translatable strings.
This is a minor improvement to add line numbers to the LOG_VULKAN_ERROR
define. Basically error logs for Vulkan will now look like:
```
// This
25:03:347 VideoBackends/Vulkan/VulkanLoader.cpp:247 E[Video]: (WaitForCommandBufferCompletion:278) vkWaitForFences failed: (2: VK_TIMEOUT)
// Instead of
15:45:154 VideoBackends/Vulkan/VulkanLoader.cpp:247 E[Video]: (WaitForCommandBufferCompletion) vkWaitForFences failed: (2: VK_TIMEOUT)
```
Set the Render Window as the parent of the Confirm On Stop confirmation
dialog when Keep Window On Top is enabled, ensuring it will always be
visible.
Previously, when Confirm On Stop and Keep Window On Top were both
enabled the Confirm On Stop dialog could be hidden by the render window
in the following situations:
* Clicking Stop in the Main Window
* Clicking the Main Window's close button
* Pressing the Stop hotkey while in FullScreen mode
This was particularly troublesome because the confirm dialog is modal,
preventing the user from moving the render window out of the way if it
was obscuring the dialog.
Fixes https://bugs.dolphin-emu.org/issues/13247.
A vector of length 0 can have a null data pointer, which causes UB when
passed to memcpy, so only copy when we actually have data to copy. This
caused crashes in certain cases when compiling Dolphin with Clang and
LTO enabled.
Allow connecting or disconnecting multiple Wii Remotes simultaneously
instead of only handling the highest index whose hotkey is pressed. This
allows using a single hotkey to toggle multiple remotes.
Before the call to OnSelectionChange, m_code_edit and m_code_remove are
disabled and UpdateList calls m_code_list->clear(), thereby deselecting
any selected items.
When no items are selected, OnSelectionChange disables m_code_edit and
m_code_remove and then returns. Since that was already done, the call
doesn't change anything and can be removed.
Create ARCodeWidget and GeckoCodeWidget once on startup rather than
every time a game is launched or shutdown.
In addition to losing focus on the tab (since the previous widget and
tab no longer existed), the behavior prior to this commit could cause a
crash if the user initiated a game shutdown and then opened a code edit
window since the AR/GeckoCodeWidget would get deleted in the meantime.
Also some minor refactoring of nearby/related code:
* Make non-obvious variable types explicit instead of auto.
* Throw some consts around.
* Use setDisabled(empty) instead of setEnabled(!empty).
Changes the RetroAchievements "Log In" button's text to "To log in, stop the current emulation." when the button is disabled because an emulation session is active. This allows a user to understand why the button is disabled, and how this state can be resolved.
Previously, it could be unclear why this button was disabled without an understanding of the underlying system.
Co-Authored-By: JosJuice <josjuice@gmail.com>
The description of the Speed Limit setting currently uses a lot of
complicated terms, like "emulated time" (known to many Dolphin
developers, but in my experience not known by even advanced emulator
users) and "maximum time scale" (I have never heard it before). The
meaning of "sustainable" is also unclear in context.
This commit rewords the description to be easier to understand.
Fixes https://bugs.dolphin-emu.org/issues/13593. Before, it would attempt to
use the old shader, which did not exist for the new stereo mode. Changing the
postprocessing shader afterwards would work properly, although passive 3D only
has one option, so it was just broken without restarting Dolphin.
This also fixes the UI not updating when using one of the stereo toggle hotkeys.
These patches were added in bde9a459cd
and enabled by default in 36ecfdd6b5.
They allowed the game to run in Dolphin but disabled dynamic shadows.
The game adds 4 to the start address of otherwise valid display lists
for no obvious reason. Now that Dolphin forces 32-byte alignment these
patches are no longer needed.
`std::bit_cast` participates in overload resolution only if `sizeof(To) == sizeof(From)` and both `To` and `From` are *TriviallyCopyable* types, so the static assertions here can be removed. `[[nodiscard]]` was added as well.
For a long time now, we've had a problem where game INIs persist in
the copied Sys folder if they've been deleted from the original Sys
folder. (I still have hundreds of game INIs locally that only set
EmulationStateId, and we removed those game INIs 6 years ago. On the
buildbot, we do occasionally clear out the build directories manually,
so I'd assume it's not quite as bad there.)
This commit fixes the problem by deleting the output Sys folder before
copying the original Sys folder to the output Sys folder. This should be
a bit slower, but in my testing, the difference seems small. At least if
you have an SSD, which I really hope people have nowadays!
Operating systems other than Windows have not been touched, because:
* Android: Already explicitly deletes the output Sys folder.
* macOS: Does some magic to put the Sys folder in the app bundle, which I
will simply assume isn't affected by this problem, without testing.
* Linux: Expects the person building to manually manage the Sys folder.
Update the checkmarked slot in the Select State Slot menu when the
Increase Selected State Slot or Decrease Selected State Slot hotkeys are
pressed.
The actual selected save slot was being changed correctly before this
commit; this just fixes the menu checkmark.
The biquad filter is used in all Pikmin games for cursor sound effects
in the main menu, although the difference is subtle.
The low-pass filter is used at least by Pikmin 2 Wii during the
spaceship crash in the intro and fixes the missing "puff" sound effects
whenever there is black smoke coming out of the engine.
With this change, a different message is displayed if starting a game with RetroAchievements fails due to the Dolphin version being blocked as opposed to failing because the game hash is unsupported.
This compile definition was removed in 68cbd2640d because it was complicated by changes in 50dc0ffbce. Thus, the LLVM disassembler would never be used in UICommon's Disassembler class.
JMC47