if the PC makes no sense, it's probably because some HLE has done the access.
perhaps we should wrap accesses from IOS HLE, so that we can trace it? dunno if it presents that much of a problem anymore.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6098 8ced0084-cf51-0410-be5f-012b33b47a6e
* Flushed the JIT cache on "ICFI" (Flush Instruction Cache)
* Made all instructions one cycle in duration
Fixes issue 233
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6088 8ced0084-cf51-0410-be5f-012b33b47a6e
Use the debug option for conf.CheckWXConfig on OS X as on Unix.
Take care of a few compiler warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6084 8ced0084-cf51-0410-be5f-012b33b47a6e
Really that happens because the fifo.CPReadWriteDistance is negative.
Example: CPReadWriteDistance: -864 CPEnd: 10092672 fifo.CPBase: 9568416
In SMG this is because PI_FIFO_RESET is writing and after fifo.CPReadWriteDistance will be setted to 0.
To Prevent that, I've Implemented AbortFrame function in the CommmandProcessor. It should fix overflown because of that.
Note: There is other issue (Issue 2846) where the fifo.CPReadWriteDistance is negative too but the effect is different.
I'm working to solve this.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6083 8ced0084-cf51-0410-be5f-012b33b47a6e
I am not sure i am understanding what the pipeline really does, and more so what
the GC/WII expects here. If my comments are incorrect, please let me know.
This was tested with MP2:E, ZWW on r6075.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6078 8ced0084-cf51-0410-be5f-012b33b47a6e
* Improved constants folding in load instructions
* Merged load instructions
* Fixed the register allocator so that it can restore the registers state after jumping to the dispatcher (in case of a conditional jump)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6076 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added working Step Over function.
* Added hard-coded hotkeys for step into (F11), step over (F10) and toggle breakpoint (F9). The hotkeys are only active when the debugger is enabled. They function as before when the debugger is disabled.
* Added Debug menu item.
* Removed obsolete NotifyBreakpoint function from JIT and JITIL.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6069 8ced0084-cf51-0410-be5f-012b33b47a6e
Clean up of the input selected for the opengl x window in linux.
Fix a potential segfault when taking a screenshot (happens consistently when using "Save Targets" from the video debugger window).
Fix a memory corruption error that results from the wrong image size being passed when dumping textures.
Make the screenshot hotkey configurable.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6067 8ced0084-cf51-0410-be5f-012b33b47a6e
Remove a member variable which I introduced in r5907 although it never actually got used. Restores binary compatibility (at least in that regard) to pre-r5907 video plugins, but breaks any binaries after that :P
Update FIFO watermark tightness recommendations. 1000 is quite a high value I guess, but some people seem to need it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6060 8ced0084-cf51-0410-be5f-012b33b47a6e
The code changes disable the usual pipeline flush for certain BP Writes that occur while the minimap is being drawn in Zelda: twilight princess. This significantly increases speed while in hyrule field. The way this is accomplished is described more in depth on page 42 of Xtreme's thread. Big thanks to Xtreme for doing a great job hosting that thread, and Kiesel-stein for initial work on the hack
Also, I used the resource editor in Visual studio to generate the GUI code for the DX11 plugin, and some code appeared to be removed, although the behavior of the GUI did not seem to change. Hopefully someone more experienced with resource files (forms?) can double check that no code was damaged
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6057 8ced0084-cf51-0410-be5f-012b33b47a6e
(those originating from a thread other than the gpu thread)
glxMakeCurrent is supposed to error out when the context is
still current in another thread. NVIDIA handles that, but mesa3d errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6054 8ced0084-cf51-0410-be5f-012b33b47a6e
Now it only writes back dirty registers when flushed
* Fixed KillImmediate
* Renamed LoadToX64 and StoreFromX64 to BindToRegister and StoreFromRegister respectively (as suggested by ector)
* Code cleanup in calls to the reg allocator
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6053 8ced0084-cf51-0410-be5f-012b33b47a6e
* Some fixes to linear interpolation
* Adds interpolation to ADPCM samples
* Relaxed a volume limit in ADPCM_Vol
Fixed:
- Frac rolls over one iteration before samplePos advances. Can introduce noise similar to flipping samples (1234 => 1214). Introduced oldFrac to fix this. This isn't as noticeable as it probably should be because of below.
- When samplePos doesn't advance it interpolates between two copies of the same sample which actually does nothing. Changed it to always use the current and next sample.
- When frac is 0 you should get 100% of yn2 instead of ~99% added a +yn2 to balance it.
Other changes:
- Added linear interpolation for ADPCM. Sounds like a good idea.
- Set ADPCM_Vol to clamp to x8000 instead of x4e20. Some games will play some sounds at x8000 volume anyways since the volume is applied before this. Lower limit can result in quiet music (x4e20) but some loud ambient sounds (0x8000).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6041 8ced0084-cf51-0410-be5f-012b33b47a6e
Made it so that Source/Core/DolphinWX/Globals.h is only used for the wxWidgets build, and a little other file inclusion clean up.
Fix an issue where a user runs a game from the open menu or toolbar items with a clean user directory, and henceforth double clicking on the empty game list (where it says double click to browse for games), that game is run again.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6037 8ced0084-cf51-0410-be5f-012b33b47a6e
platforms as well. It would seem that ABI_PARAMx will have to be
used more consistently elsewhere to match up with a change to use
them here.
Not sure yet why I still need the final section of Jit64::stX.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6035 8ced0084-cf51-0410-be5f-012b33b47a6e
* Un-cleaned the Load/Store code. I think this will fix the stability issues from r6032
* Added memory exception checking to a couple more JIT FPU instructions
* Optimised the 64bit fast memory access slightly
* Optimised the MMU speed hack.
The rest of the speed optimisations from r6032 have been retained.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6034 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix modality for the config dialogs on windows.
Fix the compress/decompress dialog wxString issues for MacOSX (hopefully).
Fix the DSP-LLE debugger for linux.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6031 8ced0084-cf51-0410-be5f-012b33b47a6e
had SSE3. Keep -msse2 on other platforms. Not sure if there are actually
any Dolphin-capable machines out there without SSE3, but..
Use -search_paths_first to give our statically linked libraries precedence
over /usr/local/lib.
Some work-in-progress changes to facilitate a more easily redistributable
application bundle on OS X.
Group compiler/preprocessor/linker flags together to make the full set
more intuitively apparent.
The various libraries in Externals have rather inconsistent conventions
for include paths. Best to encapsulate that knowledge in foo/SConscript.
Re-use utils.GenerateRevFile for all three places in the build system
where we need the SVN revision number.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6030 8ced0084-cf51-0410-be5f-012b33b47a6e
The GCC model for extended instructions like these is that you compile
with -msse3 etc. These affect code generation for whole compilation units,
so the idea is that you have a separate .c file for each instruction set
class and then indirect to the desired one at runtime.
Without e.g. -msse4.1, the GCC built-ins used by <foointrin.h> are not
available. However, in our specific case of compiling with -msse2 and
wanting to use SSE3.1 code, enough built-ins are available that we only
need to provide a little hack for pshufb.
Upgrading this to also use SSE4.1 instructions doesn't appear feasible
without a lot of undesirable duplication of GCC built-in functions and
headers, so we'd probably have to move to the GCC model of separate
source files for that.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6014 8ced0084-cf51-0410-be5f-012b33b47a6e
This one needs a lot of testing, since I don't have any games that need it, except Rogue Leader (GSWP64) - and I didn't do more "testing" than watching the stormtroopers dance due to speed reasons (altho it seems twice as fast as JIT for me; it does spit out a lot more warnings too)
btw, ITS OVER 6000!!111
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6006 8ced0084-cf51-0410-be5f-012b33b47a6e
is required to correctly link with C++ libraries like wxw.
Tell OS X that the user is doing something when using the wiimote
so that the screensaver doesn't come on when playing a Wii game.
Replace unnecessary floating point with integer math.
Remove unnecessary <sys/stat.h>'s.
Correct a few type nits.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5995 8ced0084-cf51-0410-be5f-012b33b47a6e
* Emulated correct behaviour of DSI and ISI exceptions
* Added memory exception checks
* Added fast TLB cache implementation (written by booto)
* Added "Enable MMU" option in the game properties
* Renamed old TLBHack to "MMU speed hack"
Thanks to booto (PowerPC) and nash (testing) who spent many weeks of their time helping me make this work. Also thanks to shuffle2 for finding and converting the map file of the original target.
There are two options for MMU emulation found under the game properties. "Enable MMU" is the accurate emulation option. "MMU speed hack" is the old TLBHack renamed. Most games will work with one or the other. Some games can work with both options ticked.
Only the JIT recompiler and Interpreter work with the MMU code. JITIL is not supported (too hard for me to add).
The speed optimised code still needs a lot more work and is disabled for now.
Fixes issue 2546
Fixes issue 2583
Fixes issue 2704
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5994 8ced0084-cf51-0410-be5f-012b33b47a6e
* Code cleanup
* Reduce the cost of RFI instruction (heavily used on PowerPC)
* Implement missing cases in bclrx
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5991 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix an issue that prevented the code window settings from taking effect on application start. (Thanks shuffle2, skid_au, and sanchez).
Fix a potential segmentation fault with the DSP-LLE debugger window.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5988 8ced0084-cf51-0410-be5f-012b33b47a6e
This is EXPERIMENTAL, in theory don't break any game but if so Revert this commit immediately please.
Note: Beside Eternal Darkness needs DirectX 11 or DirectX 9 with Zelda Hack to works fine.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5986 8ced0084-cf51-0410-be5f-012b33b47a6e
Also refresh the log window at that time so artifacts are cleared.
A little more code cleanup of the debugger windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5983 8ced0084-cf51-0410-be5f-012b33b47a6e
PowerPC needs 2 instructions to load a 32-bits immediate value in a register (lis + addi; lis + ori). We can merge both instructions into a single SetImmediate().
This commit shares code with r5799, so to prevent another flame war on OSX vs Windows, I added #ifdef around the "bad" lines...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5982 8ced0084-cf51-0410-be5f-012b33b47a6e
Added a default perspective for the debugger.
Save all perspectives, and not just the active one.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5979 8ced0084-cf51-0410-be5f-012b33b47a6e
* Merge some loops in PPCAnalyst::Flatten()
* Put ppcState.cr and ppcState.cr_fast[] into a single C++ union. This allows quick access to the whole CR register without needing to merge the cr_fast array. The implemented solution assumes the host system is little-endian, but it seems to be already assumed in many places in the code...
* Inline the call to computeCR: it now costs a few more memory bytes per JITed instruction but it removes the CPU overhead of the CALL. This allowed to remove some unneeded MOV as well.
* Jit64::GenerateCarry() don't need a temporary register anymore
* Fix what seems to be a bug in PowerPC instruction RFI: the wrong bit was cleared in MSR
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5970 8ced0084-cf51-0410-be5f-012b33b47a6e
Don't rely on trailing /'s in directory names.
Destdir only works for global builds.
Only tar up global builds if they are in a destdir to
avoid SCons eating all available memory indexing /usr.
Print current status of shared_foo in 'scons -h'.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5966 8ced0084-cf51-0410-be5f-012b33b47a6e
The new default wiiuse wiimote read timeout of 30ms has been overridden previously by the default 10ms from the wiimoteplugin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5965 8ced0084-cf51-0410-be5f-012b33b47a6e
Of course, this doesn't do much good without another shader compiler..
WIP of OS X application bundle building.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5961 8ced0084-cf51-0410-be5f-012b33b47a6e
wxFileSelectorDefaultWildcardStr had been copy-pasted and
changed to use specific filetypes had retained the extranous
format arguments to wxString::Format.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5957 8ced0084-cf51-0410-be5f-012b33b47a6e
autoconfiguration tests. Some versions of gcc care enough about ANSI C
to complain about this.
Use the Linux install hierarchy conventions on other Unices as well.
XKeysymToString returns NULL on unknown keysyms, which is not a valid
std::string initializer.
There appears to be some disagreement regarding the second parameter
to iconv(). Some versions/installations have it as const, others don't.
Unfortunately, due to wonderful C++ brain damage, implicit conversion
from const to non-const doesn't work here.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5945 8ced0084-cf51-0410-be5f-012b33b47a6e
- More removal of unnecessary code
- Windows: Modification of Wiiuse_Find under windows,
instead of always deleting and recreating the whole wiimote_t struct, we do maintain the old one,
adding/removing new wiimotes to/from it
- some wiimote bugfixes, see below for details
Windows related stuff:
Fixed most of the disconnection issues (single and mulitple real wiimotes, both wiimote plugins) (I haven't had a disconnect msg in hours anymore(ms stack)).
Rumble bug should be fixed now(both plugins,pls verify).
Fixed some pair up issues( sometimes you had to press the pair up button up to 3 times, till it paired up your wiimote).
More dongles might be now supported via ms stack, pls try and report back!
Fixed a problem where multiple wiimotes would swap slots on pair-up/addition of a real wiimote (2-4 real wiimotes) (both plugins, but not integrated into new plugin).
Improved ingame auto-pairup for real wiimotes(thx to the new wiiuse_find routine).
Fixed a bug on setting wiimote timeouts, which means changing the timeout was just a dummy earlier.
Most of the stuff concerns stuff in the old wiimote plugin, dont worry, in the end it's important for both plugins. It will get ported to the new plugin sooner or later.:')
Some minor stuff.
This might break osx/linux build and maybe the new plugin realwiimote-wise only. Thx to glennrics to pointing me to some breakings on linux, I didn't fix them all.
PS I hope i haven't forgotten anything, enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5940 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a DSPCORE_STOP state. The DSP-LLE debugger window segmentation faults if it is openned when a game is not running.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5931 8ced0084-cf51-0410-be5f-012b33b47a6e
Should revisit and make the distinction more explicit.
Put the Data and Sys directories under Resources in the OS X app bundle.
Construct config.h (now lower-case to avoid confusion with other Config.h
instances in the tree) in the root. One tiny step towards a read-only
and cross-buildable source tree.
Some minor bits of non-Linux Unix portability.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5921 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
To change it, right click the affected game in the iso list, select Properties, and enter some constant for "Watermark tightness". Reasonable values range from 20 to 200.
FIFO seems unoverflowable on my computer no matter what I set this value to, so test whether tuning the value helps you ;P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5907 8ced0084-cf51-0410-be5f-012b33b47a6e
- fix numerous warnings
- make some variables unsigned
- remove redundant code and header inclusions
- make code more compact in lots of cases
Committing some additional changes by myself:
- additional header cleanups
- cleanup DX11 initialization/shutdown process (hinted at by avindra)
- Remove the cgD3D9 stuff from Externals since it's no longer needed
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5903 8ced0084-cf51-0410-be5f-012b33b47a6e
Because we only ever call Pos_ReadDirect (and through that, DataRead<T>)
from JIT generated code, the compiler may not get the heads-up to properly
prepare for run-time instantiation of those template functions.
Explicitly instantiating Pos_ReadDirect gets around that issue.
Also force DataRead* inline as gcc didn't always do that itself when the
DataRead functions in turn were called from (other) template functions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5902 8ced0084-cf51-0410-be5f-012b33b47a6e
from JIT generated code, the compiler may not get the heads-up to properly
prepare for run-time instantiation of those template functions.
Explicitly instantiating Pos_ReadDirect gets around that issue.
Also force DataRead* inline as gcc didn't always do that itself when the
DataRead functions in turn were called from (other) template functions.
I am far from a C++ language lawyer, so I cannot speak learnedly about the
correctness of this solution, but it works.
Dolphin.app built on OS X 10.6 now actually works on 10.5 as well.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5901 8ced0084-cf51-0410-be5f-012b33b47a6e
Move MAP_32BIT to MemoryUtil.h.
MAP_VARIABLE is simply the absence of MAP_FIXED.
Replace MAP_ANONYMOUS with the more traditional MAP_ANON - Linux is compatible.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5900 8ced0084-cf51-0410-be5f-012b33b47a6e
Move MAP_32BIT to MemoryUtil.h.
MAP_VARIABLE is simply the absence of MAP_FIXED.
Replace MAP_ANONYMOUS with the more traditional MAP_ANON - Linux is compatible.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5899 8ced0084-cf51-0410-be5f-012b33b47a6e
- Eliminate the useless check for cpu modifications option from efb to ram as it must be enabled always
- use constant names in dx11 for buffer length calculation instead to simplify code reading
- implemented scaled efb copy in opengl, still bugy in some games, the option is not in the gui but will add it when it works perfect
- Change the depth calculation behavior:
if the game use z textures is exactly the same as before.
if the game do not use z texture calculate z values in the vertex shader. the advantage id this approach is that early z culling is applied,
improving fill rate. this mus speed up things, even with ssaa and msaa enabled.
please test for regression and enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5896 8ced0084-cf51-0410-be5f-012b33b47a6e
For a typical OS X app, one only needs to specify the SDK version and the
target OS version range.
Because we use OpenCL which is new in 10.6, however, we must be somewhat
more verbose in order to make use of the forward compatibility facilities.
Unfortunately, the critical bit that is required to have binaries built
on 10.6 work on 10.5, namely disabling the new compact __LINKEDIT format,
causes stack alignment crashes at emulation time on 10.6, so for now
Leopard users still have to build Dolphin themselves.
Hopefully, this stack alignment problem will turn out to be coincident
with lingering alignment issues.
Include the OS X version of the Cg framework in Externals as with the
Windows one. The header files appear to be the same in the Windows and the
OS X builds of the February 2.2 Cg toolkit, although they are differently
munged by what appears to be some automatic process, so no new duplicates.
Any upgrades to the Cg libraries will of course need to be done in sync.
I do hope that Sonicadvance1's GLSL work will enable us to get rid of Cg.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5893 8ced0084-cf51-0410-be5f-012b33b47a6e
Use linear filtering for various buffer copies, improves visual quality a lot.
Some other tiny changes as well.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5891 8ced0084-cf51-0410-be5f-012b33b47a6e
Dynamically load a d3dx9 dll at runtime (I tested Dolphin with the first d3dx9 dll and it even worked fine there).
Should fix the flood of users asking why they can't select the DX9 plugin :P
Compilers should be able to stop bundling cgD3D9.dll now.
Minor changes in DX11.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5890 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SDL for input devices only on Windows and Linux.
(Still globally enabled for the legacy Wiimote plugin.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5886 8ced0084-cf51-0410-be5f-012b33b47a6e
can go to the log window like with other subsystems.
Remove a Wiiuse dependency on libm from when it was a shared library.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5885 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented new efb to ram in opengl
modified TextureConversionShader preparing the implementation of new efb to ram in dx11
please test for regressions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5874 8ced0084-cf51-0410-be5f-012b33b47a6e
Also two little changes which don't affect functionality or performance:
Change an IUnknown* cast to a T* cast.
Improve some error messages.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5870 8ced0084-cf51-0410-be5f-012b33b47a6e
Move bits of HAVE_OPENCL/HAVE_WX for OS X from SConstruct to header files.
Use /usr/lib/libz on OS X now that we no longer have -L/opt/local/lib in
the library path. It is still possible that we could pick up a libz in
/usr/local/lib that would make the application non-redistributable, but
the danger is much less than previously.
Also bits of minor portability cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5868 8ced0084-cf51-0410-be5f-012b33b47a6e
are properly declared at thread entry/exit. I am leaving the ones in
Wiiuse while there's still a small hope that it may be used outside of
Dolphin, though.
Move the fixed MAP_32BIT definition for OS X to Common.h.
UDPNunchuk.cpp was deleted, so update the scons build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5864 8ced0084-cf51-0410-be5f-012b33b47a6e
fix frame dumping and screenshots in d3d9 and opengl
some improvements to the new efb to ram
please test to see if the issues introduced by the new efb to ram are solved by this commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5862 8ced0084-cf51-0410-be5f-012b33b47a6e
identifying which options and parameters go with which platforms etc.
OS X, like Windows, now no longer uses Config.h. Configure() is still
used for the wx-config parameters, but that is a temporary measure.
Globals.cpp has never been used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5860 8ced0084-cf51-0410-be5f-012b33b47a6e
Put the filename back into the "Saving settings ..." notice log (soren don't remove this again.)
Added a "batch" mode command line option. Now dolphin will not exit with the emulator if a file is run from the command line unless you also use the "batch" option. For example in linux "dolphin-emu -b -e filename".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5859 8ced0084-cf51-0410-be5f-012b33b47a6e
This "run once" behavior is more in line with expectations of a command
line invocation and matches what the nowx build does.
Personally, this makes the main build do everything the nowx build does
and more.
However, if you feel that the main build still doesn't have feature parity
with nowx, please say so now, so we can fix it and kill off nowx.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5855 8ced0084-cf51-0410-be5f-012b33b47a6e
using it as a constant in several places. Saves a few bytes and the time
it takes to recompile a bunch of files whenever svnversion twitches.
Using the SVN version string as an integer is not portable as the Unix
svnversion always includes e.g. the "M" suffix for a modified tree.
Windows people, please check my change to Plugin_VideoDX9/Src/main.cpp
as I don't really understand how _T() and the %hs format string work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5852 8ced0084-cf51-0410-be5f-012b33b47a6e
normally (on a fresh install) be triggered by the user clicking on
the GUI.
This notably includes refreshing the game list. The progress dialog
used in the course of updating the game list relies on wxWidgets
being able to yield to its event handler which isn't started until
after OnInit.
In fact, we might want to consider just moving all the initialization
currently triggered by OnInit into AfterInit so that we can rely on
the event handler running there. This would mean that we don't have to
worry about whether those code paths are triggered by a user click or
run at init time. This will require some more testing, though.
For now just move automatic booting along as this requires the game
list initialization to be done.
We also could instead choose to special-case cases like updating the
game list and simply not use a progress dialog there if the event
handler isn't running, but this approach is clearly cleaner.
See thread at http://code.google.com/p/dolphin-emu/source/detail?r=5848 .
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5849 8ced0084-cf51-0410-be5f-012b33b47a6e
Some general code cleanup, and removed a PanicAlert (made it a NOTICE_LOG instead) so that only one panic alert is shown when attempting to load from dvd/cdrom drives, and none are shown when "Show Drives" is selected from the menu.
Also removed the hack introduced in revision 5564 that prevents the GameListCtrl from being properly updated when a game is loaded from the command line or via the autostart feature of the debugger.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5848 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fixed a segmentation fault caused by the UDP Wiimote stuff when a thread was not properly ended.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5847 8ced0084-cf51-0410-be5f-012b33b47a6e
replace efb to ram implementation by a hybrid approach.
explanation:
when copying from efb to texture, instead of make a copy to a texture or to the ram, copy the data to both, in hi quality to the texture and in native quality to the ram.
then instead of re-decoding the data from ram (very slow) use the data in the texture.
to improve this even more, test if the cpu has modified the data in the ram copy, if so, update the texture in memory and mark it as dynamic to avoid redundant work in future frames.
having all this implemented this is what is archived:
sms: full quality with scaled efb copies and fully functional goop cleaning :)
ztp: efb to texture speed with full map support.
nsmbw: this is a hard to emulate game, as it make a lot of shading and texture modification in cpu. it only have 35 fps in my system with new efb to ram but is 10 fps faster than normal efb to ram.
this game also show me another unimplemented feature, copy efb to multiple textures at the same time (is used to animate coins and other things in the world).
this is a remaining todo in efb to texture.
a lot of games should improve, so please test and let me know any regresion caused by this commit.
if everyone likes this the next step is, implement efb to multilpe textures and merge efb to ram and efb to texture.
then port to the other plugins.
enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5846 8ced0084-cf51-0410-be5f-012b33b47a6e
i made this changes trying to found the origin of the sps in zww and sms but no look so far.
the code is looking nice so commit it
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5845 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added JIT breakpoints functionality
* Added a menu option to disable the JIT block cache
* Enabled single stepping in JIT mode as a run-time option (automatically enabled when the debugger is used)
* Enabled the missing JIT Off menu options
* Removed the JIT Unlimited Cache hack
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5833 8ced0084-cf51-0410-be5f-012b33b47a6e
For everyone having black screens on Windows: Try switching off MSAA, it seems to be broken (at least for me)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5832 8ced0084-cf51-0410-be5f-012b33b47a6e
Update Issue 2508
This should take care about the black screen. Please open a new issue for other problems that may arise.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5830 8ced0084-cf51-0410-be5f-012b33b47a6e
Shawn Hoffman