To set it up, change the Port 1 controller to "Steering Wheel" under the GameCube tab. This will tell the game that you have a force feedback steering wheel connected.
In the Gamecube Pad Settings, change the Rumble Motor to "Constant".
Configure the controls:
Main Stick Left/Right = Steer Left/Right
Main Stick Up = Accelerate
Main Stick Down = Brake
Thanks to ulao for the device communications info.
- In icon retrieving I removed the "format check" as it shouldn't really matter to have mixed icon formats. Also removed the "Time splitters hack" as there's no reason for it since we are only checking the last 3 bits and I'm pretty sure having bits 1 and 2 set is the same as having them unset.
- Icon retrieving uses AnimSpeed as stop signal (every icon must have an speed set, the first speed that is 0 means there are no more icons)
- Also, in icon retrieving I added support for "blank frames"(Luigi's Mansion and Pikmin that I know of). With this the base for icon animation is complete.
- Fixed PSOIII savegame patch which was wrong before.
Signed-off-by: LPFaint99 <lpfaint99@gmail.com>
Very useful to compare performance between two builds, check the impact of
a configuration option, etc. FPS log is stored in User/Logs/fps.txt and is
reset each time you launch a game. Only enabled if you check the "Log FPS
to file" option in your graphics settings.
Could be improved a bit: currently logs only every 1s (so you can't really
see small variations), maybe output more infos to the fps.txt like
average/stddev (but Excel/Libreoffice/Google Docs can compute that easily
too).
the intent is to replace the haphazard scheduling and finger-crossing associated with saving/loading with the correct and minimal necessary wait for each thread to reach a known safe location before commencing the savestate operation, and for any already-paused components to not need to be resumed to do so.
This allows users to easily check whether their Wii dump is corrupted or not
using the Dolphin properties window. Right click on a game, Properties,
Filesystem tab, then right click on the game partition and select "Check
partition integrity".
This may have some false negatives due to the unused clusters heuristic (see
the comment in VolumeWiiCrypted.cpp). False positives are unlikely.
This adds an "Analyzer" tab to the fifoplayer dialog which allows to conveniently browse through all register pokes that are being sent by the game each frame.
There's also a search function, but it doesn't work all that well for anything but simple searches at the moment. However, I'm merging this anyway since I'm not sure if I'm going to finish this.
Note that due to recent fifo changes, it's not yet possible to run fifoplayer in dual-core mode.
please test for regressions, speed and for other issues fixed, as a example, the black color in water splash in super mario galaxy are fixed with this rev.
please as soon as yo find a bug let me know.
to marcosvitali.
Added an external exception check when the CPU writes to the FIFO. This allows
the CPU time to service FIFO overflows. Fixes random hangs caused by FIFO
overflows and desyncs like in "The Last Story" and "Battalion Wars 2". Thanks
to marcosvitali for the research.
Added some code to unlink invalidated blocks so that the recompiled block can be
linked (speed-up).
This release still fixed the hangs produced by fifo overflow without sacrifice
performance. For example you can test Tutorial moves at the beginning of The last history now
is fluid 30/60.
Fixed possibles random hangs in DC mode.
Fixed hangs in DC mode in (Simpsons, Monkey Island, Pokemon XD, etc)
Implemented accurate management of Pixel Engine Interrupts. Now the GPU loop
is stopped when a PE Interrupt needs to be managed and resumed when Pixel Engine
finish.
Fixed Metroid Prime 3 and 2 desync. And other games with desync because of
FIFO Reset. That happens because FIFO_RW_DISTANCE_HI must be written first, for checking
fifo.CPReadWriteDistance == 0, so some fifo resets was not managed in the right
way.
Fixed Super Monkey Ball in some cases when the game write the
WriteReadDistance need to be safe like the SafeCPRead.
Improved the CheckException for the GatherPipe writes in JIT, now only the
External Exceptions are processed.
Fixed definitely Pokemon XD in dual core mode. This game is doing something
not allowed. It attach to CPU the same fifo attached to the GPU in multibuffer
mode. I added a check to prevent overwrite the GPU FIFO with the CPU FIFO. If
the game do that on breakpoint the solution can fail.
Fixed ReadWriteDistance calc when CPRead > CPWrite.
Added Token and Finish cause to GP Jit checking.
Additional cleanup in CommandProcessor.
Fixes issue 5209
Fixes issue 5055
Fixes issue 4889
Fixes issue 4061
Fixes issue 4010
Fixes issue 3902
(Just applied to FrameTools.cpp for now)
Allows one to properly restart Pokémon by hitting play :P
Ignore non-ASCII strings passed to DisplayMessage(). These strings would end up going to renderer display and statusbar/titlebar, which can't handle them properly.
Commit 9ddb67d4a9 seems to have
introduced a segfault on Mac. The issue is that it this change casts
wxConvCurrent (which is a wxMBConvLibc) to a wxCSConv. This is an
unsafe cast because wxCSConv has member variables, but wxMBConvLibc
does not.
In LogWindow.cpp, the constructor for m_SJISConv is dereferencing one
of those member variables, which is a dereference of uninitialized
memory!
This CL reverts to the older (non-crashing) constructor, but keeps the
behavior the same.
Fixed the JIT cache, invalidating one instruction length at a time.
Fixed a bug where the JIT cache did not get invalidated when stepping.
Disabled fused instructions in the debugger.
return std::strings instead of filling a buffer,
move gci filename generation to a function inside gcmemcard instead of the gui code
change all functions that do not modify the object to const
Conflicts:
Source/Core/Core/Src/HW/GCMemcard.cpp
Source/Core/DolphinWX/Src/MemcardManager.cpp
Signed-off-by: LPFaint99 <lpfaint99@gmail.com>
memory cards that have gaps in the fst
Conflicts:
.gitignore
Source/Core/DolphinWX/Src/MemcardManager.cpp
Signed-off-by: LPFaint99 <lpfaint99@gmail.com>
Also re - implement the emulation issues column that was reverted, make it a bit bigger since sentences need more words and delete the issues portion of the emustate tooltip since it is unnecessary now.
The "Notes" column is gone and in it's place an "Emulation Notes" column is placed (it contains the emulationissues lines from the game inis). Notes that contain useful info about the game can be seen with just a glance this way.
Fixes issue 5043.
- Fixes all (I hope) BBox-related unknown pointer crashes.
- Fixes wrong BBox values with Frame Skip on (and the resulting unknown pointer crashes).
- Fixes a small oversight on the change I made to the ISO Properties dialog.
This should also be a (very very little) bit faster than the previous version.
Should fix most graphical issues with Paper Mario: TTYD and Super Paper Mario. Fixes issue 360.
Since only those two games seem to require BBox support, and as per ector's suggestion, BBox is only enabled for those two games.
BBoxes and Display List Caches don't get along too well, causing Paper Mario: TTYD to hang during certain effects where BBoxes are used. For now, I disabled DList Cache for the Paper Mario games, hopefully both will be compatible in the future.
Uses a single page for configuring ALL wiimotes now.
Due to the use of wxWindow::NewControlId, this might increase our wx version requirements (irrelevant for windows users). Works fine with wx 2.8.10 at least, but the docs aren't more specific about when wxWindow::NewControlId was introduced. If anyone doesn't like this, I'll change it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7692 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix the wxMessageAlert called from non-gui threads in the WXGTK build to use the passed caption.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7678 8ced0084-cf51-0410-be5f-012b33b47a6e
Also if the OpenGL backend throw a panic alert if the RGB to/from YUYV shaders fail to compile instead of an error log. If these shaders fail to compile it should be reported. I am not sure that a panic alert should be thrown in general when any shader fails to compile (as was discussed on IRC).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7677 8ced0084-cf51-0410-be5f-012b33b47a6e
requires NG-id, NG-key-id, NG-priv, NG-sig
sorry for not fixing this sooner, I forgot that I cleared my wiis private keys before the initial commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7642 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed OnFrame.cpp/h to a more accurate Movie.cpp/h. Made some small changes that may improve movie synchronization.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7620 8ced0084-cf51-0410-be5f-012b33b47a6e
Also don't try to save and load states when the emulator is not running. This should fix most of issu 4600.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7607 8ced0084-cf51-0410-be5f-012b33b47a6e
It turns out that this (somewhat) gets rid of memory-related exceptions which used to occur (especially) during 8-bit cheat searches. At least this is the case with my computer that has 3GB of RAM (the issue didn't seem to be caused by 100% of RAM usage, however).
Hopefully you'll be able to perform the following steps without errors now:
1. Open any game in Dolphin;
2. Go to Tools->Cheats Manager, and open the "Cheat Search" tab;
3. Preferably set the "Data Size" to 8-bit (the smaller, the more initial search results);
4. Press the "New Scan" button;
5. Use the "Unknown" search filter (which won't narrow the results down at all);
6. Press the "Next Scan" button.
(oh, and fix a typo in a comment I introduced in r6791 :p)
Anyway, make sure to tell me any eventual errors/regressions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7596 8ced0084-cf51-0410-be5f-012b33b47a6e
Removes the ugliness that was the portable file, and now creating a shortcut or file association is less of a pain
it is still necessary to modify the file association from ".../dolphin.exe" "%1" to ".../dolphin.exe" /e "%1"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7593 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes button spacing more consistent and uses the native button order of the OK/Cancel/... buttons.
(Mostly) fixes issue 4390.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7581 8ced0084-cf51-0410-be5f-012b33b47a6e
Left unselected, dolphin defaults to nstc-u and sets ntsc-j if the iso is japanese (old behavior).
Selected, ntsc-j is forced.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7580 8ced0084-cf51-0410-be5f-012b33b47a6e
sliders being unresponsive during emulation. Fixes issue 4496.
wxw complaining about non-stock menuitem without text (sysmenu menuitem).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7579 8ced0084-cf51-0410-be5f-012b33b47a6e
- Moved display related options in the "Display" tab from the general config to the gfx config, renamed the tab to "Interface"
- Moved Wiimote related options in the "Wii" tab from the general config to the wiimote config
- Moved various other options to more appropriate places ("Set Console as NTSC-J", "Skip GC BIOS"
- Dropped "Window Size" adjustment
- Now displaying a warning if one tries to enable software rendering
- Other minor changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7577 8ced0084-cf51-0410-be5f-012b33b47a6e
changes fs getusage to return 1 additional inode to account for the directory itself
Fixes save creation for at least two games, R8XE52 (Jurassic: The Hunted), STEETR (Tetris Party Deluxe)
doesnt harm save creation in any games that i tested (about 25)
also it is now possible to boot a nand title by selecting the tmd file using File > Open
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7575 8ced0084-cf51-0410-be5f-012b33b47a6e
I believe this makes Dolphin more reliable than GCNcrypt v1.1 which seems to add (prepend) a buggy line when decrypting...
- Split lines using SplitString() once more (as done with ' ' and '-' already), instead of relying on find() and substr() and the (size_t)line variable.
- Rename some variables, use a for() loop instead of a while() loop.
- Apply the StripSpaces() function to each line before attempting to parse them as encrypted/decrypted AR code lines. Without this, lines such as "B1PD-DXRQ-GTRKM " (notice the unexpected space character) would be recognized neither as encrypted nor as decrypted, which could result in badly decrypted codes (a problem I had tried to explain here: http://forums.dolphin-emulator.com/showthread.php?pid=153532#pid153532).
- For the sake of error-checking, after pressing OK, throw a warning in the following situations: when a line of code is not in a valid encrypted or decrypted format, and whenever the resulting decrypted code doesn't contain any lines.
(did I do any mistakes?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7569 8ced0084-cf51-0410-be5f-012b33b47a6e
when nand root is changed the current sysconf is saved,
and the sysconf in the new location is either loaded (if exists)
or the default sysconf is created
wii menu item is updated when the root changes
small fix to saving gamelist paths to .ini paths that are removed from the gui are now removed from the ini instead of simply changing the number of paths
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7555 8ced0084-cf51-0410-be5f-012b33b47a6e
So, clarify this by rewriting the "tooltip" for the Free Look option. This should close issue 2882 and its duplicates.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7546 8ced0084-cf51-0410-be5f-012b33b47a6e
add ticket to CNANDContentLoader
move wad installer to CNANDContentManager
system menu can now be launched from a wad file without being installed first, (return to system menu from another title will still only work if system menu is installed)
cdb.vff: flushed to disc immediately, creates if the file exists but is too small, moved creation to Boot_WiiWad
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7530 8ced0084-cf51-0410-be5f-012b33b47a6e
now if you install the sysmenu from a wad in the gamelist the menubar will be updated with the new sysmenu version
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7528 8ced0084-cf51-0410-be5f-012b33b47a6e
Saving a state that is not recording over one that was will now delete the old recording. Fixes trying to record with the wrong savestate.
Fixed some compiler warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7505 8ced0084-cf51-0410-be5f-012b33b47a6e
- Introduced a description text field (!!)
- Fixed ALL setting descriptions
- Various other string changes
- Removed the projection statistics setting
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7488 8ced0084-cf51-0410-be5f-012b33b47a6e
- added a "Hacks" tab for everything which speeds up emulation
- regrouped stuff in a more sensible way
- Renamed some options to be less confusing.
- by disabling ALL checkboxes, you'll get the most accurate / recommended configuration now
- Merged the ATC options to a single slider with 4 values (with the rightmost being "ATC off")
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7486 8ced0084-cf51-0410-be5f-012b33b47a6e
- fixed a problem/crash which occurs with some gcc versions (in general on Linux systems, issue 4400)
- other minor GUI changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7472 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix a minor icon issue in the game properties dialog.
Use a little hack to deal with spaces in file names. Need to find a better way to deal with this.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7470 8ced0084-cf51-0410-be5f-012b33b47a6e
Also move the primary translation pot file to the external repository to facilitate updating translations when strings in the code are changed. Now the only time the primary dolphin repository needs to be changed for translations is when a new language is added.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7438 8ced0084-cf51-0410-be5f-012b33b47a6e
- Added final support to string type (planned implementation reaches 100%)
- Added support to post processing shaders (OpenGL backend)
- Code Maintenance:
- Reorganized the class hierarchy
- General polishing... deleted some redundant code
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7437 8ced0084-cf51-0410-be5f-012b33b47a6e
+ Added "Reset To Default" functionality for per-game profiles.
- Solved a window centering problem that occured during switching between Default Profile and a Per-game Profile.
+ Added final & complete support to reflect changes on the fly and real-time in all cases (even when you edit Default profile).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7416 8ced0084-cf51-0410-be5f-012b33b47a6e
Also, if the render window size changes while frame dumping, scale the resulting video to prevent clipping on linux. This is a complete fix for issue 4316 on linux. I don't know how to implement this on windows though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7412 8ced0084-cf51-0410-be5f-012b33b47a6e