FCVT doesn't necessarily round to zero, so the result
might be inaccurate if we use it. To ensure correct
rounding, we use FCVTS from double FPR to 32-bit GPR.
Unfortunately, FCVTS can't do double FPR to single FPR.
This is now unused. Seems like it was an improper fix
(there would be a race if saving the screenshot took longer
than 2 seconds) back when it was used too.
The intent here is to generate a more compact instruction if a 32-bit
immediate can be zero-extended to the desired 64-bit immediate.
Nowadays the emitter is smart enough to do this for us, so this logic is
redundant.
There's no need to load the 64-bit immediate into a temporary register.
x64 will sign-extend 32-bit immediates to 64 bits, giving us the exact
value we need in this case.
48 C7 C0 00 00 FF FF mov rax,0FFFFFFFFFFFF0000h
48 21 C2 and rdx,rax
48 81 E2 00 00 FF FF and rdx,0FFFFFFFFFFFF0000h
- LEA is a bit silly when the source and the destination are the same. A
simple ADD or SHL will do in those cases.
66 8D 04 45 00 00 00 00 lea ax,[rax*2]
66 03 C0 add ax,ax
48 8D 04 00 lea rax,[rax+rax]
48 03 C0 add rax,rax
66 8D 14 D5 00 00 00 00 lea dx,[rdx*8]
66 C1 E2 03 shl dx,3
- When scaling by 2, consider summing the register with itself instead.
The former always needs a 32-bit displacement, so the sum is more
compact.
66 8D 14 45 00 00 00 00 lea dx,[rax*2]
66 8D 14 00 lea dx,[rax+rax]
Other than the controller settings and JIT debug settings,
these are the only settings which were defined in Java code
but not defined in the new config system in C++. (There are
still a lot of settings that are defined in the new config
system but not yet saveable in the new config system, though.)
Instead of comparing the game ID, revision, disc number and name,
we can compare a hash of important parts of the disc including
all the aforementioned data but also additional data such as the
FST. The primary reason why I'm making this change is to let us
catch more desyncs before they happen, but this should also fix
https://bugs.dolphin-emu.org/issues/12115. As a bonus, the UI can
now distinguish the case where a client doesn't have the game at
all from the case where a client has the wrong version of the game.
Turns out, Gamecube games actually do check DILENGTH, and if DILENGTH is at 0, they'll think the transfer completed successfully even if DEINT is used, since after all, surely that means everything was sent. That caused all sorts of issues, from audio looping when a disc is removed since it's re-using the same buffer to just flat-out crashing instead of showing the disc removed screen.
In particular:
- Trying to play audio in a non-ready state returns the state-specific error, not an audio buf error
- Audio status cannot be requested in non-ready states
- The audio buffer cannot be configured in states other than ReadyNoReadsMade
- Using the stop motor command while the motor is already stopped doesn't change states
Additionally, the internal state IDs are used (which distinguish ReadyNoReadsMade and Ready), instead of the state IDs exposed in request error. This makes some of the weird behavior a bit more obvious.
State and error behavior of the seek command was not implemented in this commit.
It is my opinion that nobody should use NKit disc images without
being aware of the drawbacks of them. Since it seems like almost
nobody who is using NKit disc images knows what NKit is (hmm, now
how could that have happened...?), I am adding a warning to Dolphin
so that you can't run NKit disc images without finding out about the
drawbacks. In case someone really does want to use NKit disc images,
the warning has a "Don't show this again" option. Unfortunately, I
can't retroactively add the warning where it's most needed:
in Dolphin 5.0, which does not support Wii NKit disc images.
Pretty much the same optimization we did for AVX, although slightly more
constrained because we're stuck with the two-operand instruction where
destination and source have to match.
We could also specialize the case where registers b, c, and d are all
distinct, but I decided against it since I couldn't find any game that
does this.
Before:
66 0F 57 C0 xorpd xmm0,xmm0
66 41 0F C2 C1 06 cmpnlepd xmm0,xmm9
41 0F 28 CE movaps xmm1,xmm14
66 41 0F 38 15 CC blendvpd xmm1,xmm12,xmm0
44 0F 28 F1 movaps xmm14,xmm1
After:
66 0F 57 C0 xorpd xmm0,xmm0
66 41 0F C2 C1 06 cmpnlepd xmm0,xmm9
66 45 0F 38 15 F4 blendvpd xmm14,xmm12,xmm0
AVX has a four-operand VBLENDVPD instruction, which allows for the first
input and the destination to be different. By taking advantage of this,
we no longer need to copy one of the inputs around and we can just
reference it directly, provided it's already in a register (I have yet
to see this not be the case).
Before:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
41 0F 28 CE movaps xmm1,xmm14
66 41 0F 38 15 CA blendvpd xmm1,xmm10,xmm0
F2 44 0F 10 F1 movsd xmm14,xmm1
After:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
C4 C3 09 4B CA 00 vblendvpd xmm1,xmm14,xmm10,xmm0
F2 44 0F 10 F1 movsd xmm14,xmm1
This modifies GCMemcard::TitlePresent() to match my findings of how the GC BIOS and various games behave when you alter the fields in the directory entry.
It looks like for a save to be recognized by a game, the following have to be true:
- Game code and maker code must exactly match what the game expects.
- Filename is only checked up to the first null byte. All bytes afterwards can be whatever.
The BIOS itself does a full compare of the filename when checking for whether it should allow copying a file from one card to another, but behaves oddly in some cases when there's non-null bytes after the first null. See the big comment in `HasSameIdentity()` for details.
This function does *not* always convert from UTF-16. It converts
from UTF-16 on Windows and UTF-32 on other operating systems.
Also renaming UTF8ToUTF16 for consistency, even though it
technically doesn't have the same problem since it only was
implemented on Windows.
Fixes https://bugs.dolphin-emu.org/issues/12066.
I must've only tested the frame counter with an earlier version
of the PR that broke this, not the final version...
HostIsInstructionRAMAddress uses XCheckTLBFlag::OpcodeNoException,
so we should also use XCheckTLBFlag::OpcodeNoException when reading,
to ensure that we use the IBAT (as opposed to the DBAT) for both.
Doesn't support triggering interrupts when the thermal threshold is
exceeded, but allows polling for temperature information.
The THRM[123] registers are documented in most PPC datasheets, see e.g.
this PPC750CX one: http://datasheets.chipdb.org/IBM/PowerPC/750/750cx_um3-17-05.pdf
This is intended to catch WIA files which have been created using
wit's default parameters (40 MiB block size), once the WIA PR is
merged. The check does however also work for GCZ files – not that
I think anyone has a GCZ file with a block size that large.
There was a race condition between two PRs incrementing the
array size. CI didn't catch it because the PR that was merged
last (PR #8824) wasn't rebuilt after the first PR was merged.
CopyNandFile must not create empty files on the destination filesystem
if the source file doesn't exist.
Otherwise, this can lead to an empty Mii database being created in the
session Wii root if there's no database in the configured Wii root and
netplay or Movie is used -- that database would then be copied back to
the configured root, which causes games like MKW to complain about
corrupted Mii data even when the player has stopped using netplay.
This commit also simplifies CreateFullPath usage.
There's no need to manually extract the directory from the path,
FS::CreateFullPath does it automatically just like File::CreateFullPath
Remove the warning:
warning: offsetof within non-standard-layout type ‘JitBlock’ is conditionally-supported
JitBlock contains non-trival types now. Split the fields with trival
types that needs to be access from JIT code into JitBlockData structure.
Panic alerts don't use fixed width fonts, and translators are
unlikely to preserve the exact spacing unless they are given
specific instructions to do so and are willing to fight against
the Transifex interface a bit.
Changed several enums from Memmap.h to be static vars and implemented Get functions to query them. This seems to have boosted speed a bit in some titles? The new variables and some previously statically initialized items are now initialized via Memory::Init() and the new AddressSpace::Init(). s_ram_size_real and the new s_exram_size_real in particular are initialized from new OnionConfig values "MAIN_MEM1_SIZE" and "MAIN_MEM2_SIZE", only if "MAIN_RAM_OVERRIDE_ENABLE" is true.
GUI features have been added to Config > Advanced to adjust the new OnionConfig values.
A check has been added to State::doState to ensure savestates with memory configurations different from the current settings aren't loaded. The STATE_VERSION is now 115.
FIFO Files have been updated from version 4 to version 5, now including the MEM1 and MEM2 sizes from the time of DFF creation. FIFO Logs not using the new features (OnionConfig MAIN_RAM_OVERRIDE_ENABLE is false) are still backwards compatible. FIFO Logs that do use the new features have a MIN_LOADER_VERSION of 5. Thanks to the order of function calls, FIFO logs are able to automatically configure the new OnionConfig settings to match what is needed. This is a bit hacky, though, so I also threw in a failsafe for if the conditions that allow this to work ever go away.
I took the liberty of adding a log message to explain why the core fails to initialize if the MIN_LOADER_VERSION is too great.
Some IOS code has had the function "RAMOverrideForIOSMemoryValues" appended to it to recalculate IOS Memory Values from retail IOSes/apploaders to fit the extended memory sizes. Worry not, if MAIN_RAM_OVERRIDE_ENABLE is false, this function does absolutely nothing.
A hotfix in DolphinQt/MenuBar.cpp has been implemented for RAM Override.
Utilizing constexpr, we can eliminate the need to construct the tables
at runtime and just do all the work at compile-time. Making for less
moving parts overall.
The general structure is more or less the same, however rather than one
single initialization function, each table is built off an immediately
executed lambda function. This is nice, since it narrows the scope of
the table building logic down to the tables that actually need it.
Similar to what we do for addx. Since we're calculating b - a and
because subtraction is not communitative, we can only apply this when
source register a holds the constant.
Before:
45 8B EE mov r13d,r14d
41 83 ED 08 sub r13d,8
After:
45 8D 6E F8 lea r13d,[r14-8]
We can get away with skipping the addition when we know we're dealing
with a constant zero. Just a MOV will suffice in this case.
Once again, we don't bother to add separate handling for when overflow
is needed, because no titles would ever hit that path during my testing.
Before:
8B 7D F8 mov edi,dword ptr [rbp-8]
83 C7 00 add edi,0
After:
8B 7D F8 mov edi,dword ptr [rbp-8]
ADD has a smaller encoding for immediates that can be expressed as an
8-bit signed integer (in other words, between -128 and 127). MOV lacks
this compact representation.
Since addition allows us to swap the source registers, we can always get
the shortest sequence here by carefully checking if we're dealing with a
small immediate first. If we are, move the other source into the
destination and add the small immediate onto that. For large immediates
the reverse is preferrable.
Before:
41 BE 40 00 00 00 mov r14d,40h
44 03 75 A8 add r14d,dword ptr [rbp-58h]
After:
44 8B 75 A8 mov r14d,dword ptr [rbp-58h]
41 83 C6 40 add r14d,40h
Before:
44 8B 7D F8 mov r15d,dword ptr [rbp-8]
41 81 C7 00 68 00 CC add r15d,0CC006800h
After:
41 BF 00 68 00 CC mov r15d,0CC006800h
44 03 7D F8 add r15d,dword ptr [rbp-8]
When the source registers are a simple register and a constant zero and
overflow isn't needed, emitting LEA is kinda silly.
This will occasionally save a single byte for certain registers due to
how x86 encoding works. More importantly, LEA takes up execution
resources while MOV does not.
Before:
41 8D 7D 00 lea edi,[r13]
After:
41 8B FD mov edi,r13d
When the destination register matches a source register, the other
source register contains zero, and overflow isn't needed, the
instruction becomes a nop and we don't need to emit anything.
We could add specialized handling for the case where overflow is needed,
but none of the titles I tried would hit this path.
Before:
83 C7 00 add edi,0
After:
No functional change, just simplify some repeated logic in the case
where we're dealing with exactly one immediate and one simple register
when overflow isn't needed.
On some platforms (like Windows), the temporary file must be closed
before it can be renamed.
I guess nobody noticed this for so long because (1) the FS code has a
failsafe for missing FST entries (because existing users do not have
a FST), and most games do not care about file metadata;
(2) the write failures can only be seen in the logs.
Because we don't want this to break, I have turned the ERROR_LOGs into
PanicAlerts.
The threads can't actually be started when determinism is enabled, as
the behavior would not be deterministic, but Open() still tries to
start the threads and wait, resulting in a deadlock when booting
certain games and homebrew in NetPlay.
https://bugs.dolphin-emu.org/issues/11997
The problem seemed to be that s_DILENGTH would get set to 0
at times when it shouldn't. Simply not changing it in case
of NoReply or DTK seems to fix the problem. However, we can
actually go one step further in accuracy and use data.size()
to change s_DIMAR and s_DILENGTH as partial reads (NoReply
commands) complete, instead of jumping directly to 0 when
the whole read completes.
It used to be the case that frame advance skipped duplicate frames
(i.e. it would take 30 frame advances to get through one second
of emulated time in a 30 fps game), but this broke in 9c5c3c0.
Skipping duplicate frames making TASing less annoying.
ROM_BASE is 0, and address is unsigned. It is always
true that address >= 0. So just compare with ROM_SIZE
and don't use IN_RANGE macro to avoid the warning.
For some reason every button group was shoved into the same config
group called "Keys" which caused buggy behavior once someone tried to
have hotkeys with the same name in different groups. This fixes that,
and converts existing configs to the new group names so they don't get
reset.
When booting a Wii game, Dolphin can overwrite certain settings
in the SYSCONF file, such as turning off PAL60 for NTSC games.
Normally, these settings get reverted at the end of emulation, but
this does not happen if Dolphin crashes or force quits in some other
way. (Personally, I have a tendency to use Visual Studio's Stop
Debugging button, which kills the process...)
Dolphin also overwrites certain values in setting.txt when booting
a Wii game. Unlike with SYSCONF, we currently make no effort to
preserve the original values in this file.
This change fixes both of these problems by copying SYSCONF and
setting.txt to the Backup folder when booting a Wii game, and then
copying them back either when launching Dolphin (in case the
previous run of Dolphin crashed) or when ending emulation.
This commit attempts to improve error handling for device opening by
reducing panic alert spam when opening one or several devices fails.
Currently, Dolphin shows a panic alert for every device that we fail
to open, and another panic alert at the end if no usable device was
found. That is certainly a bit excessive -- we should only keep the
very last panic alert (the one that is shown if everything fails)
and we can just put the error for the last device open operation there.
This also changes the PanicAlert to a CriticalAlert to ensure the
message is visible even if the user has disabled regular panic alerts.
The message has also been reworded and should hopefully be clearer.
This is related to https://bugs.dolphin-emu.org/issues/10958 which
uses Qt to clear out the window so the game list isn't displayed
while the core is booting. Instead, we use the video backend to
render a black screen, which means Qt doesn't have to flip between
paint engines.
Without included header build fails on gcc-10 as:
```
[ 52%] Building CXX object Source/Core/Core/CMakeFiles/core.dir/DSP/DSPTables.cpp.o
../../../../Source/Core/Core/DSP/DSPTables.cpp: In function 'const char* DSP::pdname(u16)':
../../../../Source/Core/Core/DSP/DSPTables.cpp:492:3: error: 'sprintf' was not declared in this scope
492 | sprintf(tmpstr, "0x%04x", val);
| ^~~~~~~
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
So far in all our uses of ScopeGuard, the type of the callable is
usually just a lambda or a function pointer, so there is no need
to rely on std::function's type erasure.
While the cost of using std::function is probably negligible, it still
causes some unnecessary overhead that can be avoided by making
ScopeGuard a templated class. Thanks to class template argument
deduction in C++17 most existing usages do not even need to be changed.
See https://godbolt.org/z/KcoPni for a comparison between
a ScopeGuard that uses std::function and one that doesn't
Some locales (e.g. fr_FR.UTF-8 on ArchLinux) don't split the string stream on a space. As such, when extracted formatted data from te stream, it will return the two numbers as one for the first call, effectively overflowing the u32 variable, then will do an out-of-bounds read for the second call. Forcing the use of the C locale on the streams where it would cause a problem allows to workaround this behavior.
This fixes CreateFullPath to not create directories when it is known
that they already exist, instead of calling CreateDirectory anyway
and checking if the error is AlreadyExists. (That doesn't work
now that we have an accurate implementation of CreateDirectory
that performs permission checks before checking for existence.)
I'm not sure what I was thinking when I wrote that function.
Also adds some tests for CreateFullPath.
Fixes a regression from #8539.
CreateDirectory was the correct function to use for creating
directories since parent directories already exist and are
not owned by the system menu.
LC