Commit Graph

11033 Commits

Author SHA1 Message Date
iwubcode 670f34af60 Core: Update state to account for save system change 2020-12-24 13:49:25 -06:00
iwubcode 9ac6090c9a Core: Add Free Look controllers that are initialized at boot 2020-12-24 13:49:25 -06:00
iwubcode 27acba620c Core: Add new Free Look settings and config 2020-12-24 13:49:25 -06:00
iwubcode f6ab9a9b6f Core / VideoCommon: Remove old Free Look config 2020-12-24 13:49:25 -06:00
iwubcode e7ac095ba1 HotkeyManager: Remove Free Look functionality in preparation for replacement 2020-12-24 13:48:38 -06:00
Markus Wick 1d489b3fd5
Merge pull request #9347 from JosJuice/fpr-utilization
Jit64: Fix FPURegCache::GetRegUtilization
2020-12-21 18:37:03 +01:00
JosJuice 9460467e7c Jit64: Fix FPURegCache::GetRegUtilization
This performance bug was probably a simple copy-paste error.
(The function was identical to GPRRegCache::GetRegUtilization.)
2020-12-21 18:02:43 +01:00
MerryMage d109451ad5 Analytics: Add rarer OSes to analytics 2020-12-20 22:32:07 +00:00
Lioncash 142406f337 Core: Add initial System class
Introduces the system class that will eventually contain all relevant
system state, as opposed to everything being distributed all over the
place as global variables.

Throughout the codebase we have code that from its interface-view, does
not actually require its dependencies to be described in the interface,
and we routinely run into issues with initialization where we sometimes
make use of a facility before it's been initialized, which leads to
annoying to debug cases, because the reader needs to run through the
codebase and see what order things get initialized in, and how they're
being used. This is particularly a frequent issue in the video code.

Further, we also have a lot of code that makes use of file-scope
variables (many of which are non-trivial), which must all be default
initialized before the application can actually enter main(). While this
may not be a huge issue in itself, some of these are allocating, which
means that the application may need to use memory that it otherwise
wouldn't need to (e.g. when a game isn't running, this excess memory is
being used).

Being able to wrap all these subsystems into objects would be nicer,
since they can be constructed when they're actually needed. Them being
objects also means we can better express dependencies on subsystems as
types directly in the interface, making them explicit to the reader
instead of a change randomly blowing up, said reader inspecting it, and finding
out that something needed to be initialized beforehand. With the global
turned into a function parameter, the dependency is explicit and they
know just by reading it, that the given subsystem needs to be in a valid
state before calling the function.

For a prior example of an emulator that has moved to this model, see
yuzu, which has been migrated off of global variables all over the place
and replaced with a system instance (which has now reached the stage,
where the singleton can be removed).
2020-12-19 23:22:06 -05:00
LC 5493a86086
Merge pull request #9330 from leoetlino/tapserver-define
EXI_Device: Always define EXIDEVICE_ETHTAPSERVER for consistency
2020-12-19 21:46:01 -05:00
Léo Lam eafe005672
Fix -Wclass-memaccess warnings
We want to clear/memset the padding bytes, not just each member,
so using assignment or {} initialization is not an option.

To silence the warnings, cast the object pointer to u8* (which is not
undefined behavior) to make it explicit to the compiler that we want
to fill the object representation.
2020-12-16 15:37:43 +01:00
Léo Lam c59372dbb0
EXI_Device: Always define EXIDEVICE_ETHTAPSERVER for consistency
This keeps the enum values consistent across platforms in case new
entries are added after EXIDEVICE_ETHTAPSERVER.
2020-12-15 20:49:29 +01:00
Léo Lam 2615da820d
Merge pull request #9157 from jordan-woyak/wm-emu-tilt-wrap-around
WiimoteEmu: Allow tilt to wrap around and simulate full 360 degree rotations.
2020-12-15 03:14:14 +01:00
Martin Michelsen a9486d087f
Add tap-like fake Ethernet network interface for macOS
TunTap has recently become unmaintained, and it seems Apple wants developers to move away from kexts in general. TunTap currently takes some finagling to work on Catalina, and it may not work at all on Big Sur, necessitating a non-kext-based solution. Fortunately, fake Ethernet devices were introduced in Sierra and can be used similarly to tap adapters. This commit adds a new type of BBA interface implementation which uses fake Ethernet devices via tapserver (https://github.com/fuzziqersoftware/tapserver) to communicate with the host. This implementation was tested with PSO Episodes I & II, which can successfully connect to a private server running locally.

This implementation is only available on macOS, since that's the only place it's needed - Windows/Linux/Unix are unaffected by TunTap being deprecated.
2020-12-15 03:01:04 +01:00
Jordan Woyak fffd005178 WiimoteEmu: Allow tilt to wrap around and simulate full 360 degree rotations. 2020-12-14 19:43:28 -06:00
David Carlier 2c355b81f2
Add NetBSD support 2020-12-15 02:34:25 +01:00
Léo Lam 214ea8ff18
Merge pull request #9328 from AdmiralCurtiss/memory-view-crash
Core/AddressSpace: Return null accessors when no game is running to prevent out-of-bounds memory accesses.
2020-12-14 03:18:45 +01:00
Admiral H. Curtiss 668b8d60c8 Core/AddressSpace: Return null accessors when no game is running to prevent out-of-bounds memory accesses. 2020-12-13 06:21:07 +01:00
Léo Lam 3634508e46
Merge pull request #9311 from JosJuice/config-get-fast-2
Add caching to Config::Info
2020-12-13 03:55:39 +01:00
Jordan Woyak 0fa6bde374 HW/WiimoteReal: Drop stale data reports to prevent read queue from filling up and causing input delays. 2020-12-12 12:18:10 -06:00
JosJuice 633ab2dd7c Store pointers in Config::SYSCONF_SETTINGS
Not strictly necessary, but it reduces memory usage a little,
and the next commit will make copying an Info object slower.
2020-12-11 19:54:16 +01:00
JosJuice b285991b88 Turn Config::Info into a class with getters 2020-12-11 19:54:16 +01:00
JosJuice 11e8783893 Core: Don't copy default _Enabled sections to user INIs 2020-12-11 15:38:11 +01:00
Léo Lam 7d9276c340
Merge pull request #9317 from JosJuice/default-enabled-codes
GameSettings: Enable compatibility patches by default
2020-12-11 10:40:03 +01:00
JosJuice d77a9ad1b6 Core: Save the disabling of default enabled codes
The previous commit adjusted the code for loading
and this commit adjusts the code for saving.
2020-12-11 10:08:20 +01:00
JosJuice 366cfd0f8c Core: Allow overriding the enabling of a code
If we want to enable codes in the default game INIs,
we should have some way for users to disable them.
This commit accomplishes that by adding a *_Disabled
section corresponding to each *_Enabled section.
2020-12-11 10:02:14 +01:00
JosJuice c9e83867a1
Merge pull request #9089 from JosJuice/android-orientation-setting
Android: Move orientation setting to main settings screen
2020-12-10 16:17:44 +01:00
Léo Lam 19324e6ed9
Merge pull request #9313 from leoetlino/check-content-hashes
WiiUtils: Check hashes to determine if a title is installed and up-to-date
2020-12-08 15:45:12 +01:00
Markus Wick 3328eb4523
Merge pull request #9293 from JosJuice/jitarm64-stack-pointer
JitArm64: Properly set m_stack_pointer
2020-12-08 07:56:30 +01:00
JosJuice 9f3ad58588 JitArm64: Properly set m_stack_pointer
In order to reach the middle guard (at m_stack_base + GUARD_OFFSET)
before the bottom guard (at m_stack_base), the stack pointer
must start at an address which is higher than the middle guard.
It also didn't make sense that we were allocating memory
and then not using the top part of it.
2020-12-08 01:05:23 +01:00
Markus Wick 1827a0738b
Merge pull request #9299 from JosJuice/jitarm64-downcount
JitArm64: Do downcount immediately before jumping to dispatcher
2020-12-08 00:14:32 +01:00
JosJuice 0cebbb590e JitArm64: Call dispatcher_no_check after CompileExceptionCheck
The flags are not set correctly for a call to the version
of the dispatcher which does have a check. Jit64 uses
dispatcher_no_check here.
2020-12-07 15:08:09 +01:00
Léo Lam f7d7bbf55f
WiiUtils: Check hashes to determine if a title is installed and up-to-date
Nintendo's official title installation code and ES both only look at
content IDs but we should probably check for content hashes in addition
to checking for IDs for at least two reasons:

1. Some of the installed contents could be corrupted -- this cannot be
   easily detected without checking hashes.

2. Some mod distributors do not bother to update content IDs, which
   means that installing updates from the UI would not actually
   update the installed game. This is confusing for users.

To keep the existing semantic (for IOS especially), the new content
hash checks are opt-in for callers of GetStoredContentsFromTMD.

This commit changes WiiUtils's WAD installation logic to enable
the content hash checks.
2020-12-06 01:53:55 +01:00
JosJuice 2863b3ff5b JitArm64: Do downcount immediately before jumping to dispatcher
Fixes https://bugs.dolphin-emu.org/issues/12327.

When we started using fmt in CheckExternalExceptions, JitArm64
mysteriously stopped working even though the code path where
fmt was used never was reached. This is because the compiler
added a function prologue and epilogue to set up the stack,
since the code path that used fmt required the use of the stack.

However, the breakage didn't actually have anything to do
with the usage of the stack in itself, but rather with the
compiler's insertion of a stack canary. In the function
epilogue, a cmp instruction was inserted to check that the
stack canary had not been overwritten during the execution
of the function. This cmp instruction overwriting the status
flags ended up having a disastrous side effect once execution
returned to code emitted by JitArm64::WriteExceptionExit.

JitArm64's dispatcher contains a branch to the "do_timing"
code which is intended to be taken if the PPC downcount is
negative. However, the dispatcher doesn't update the status
flags on its own before this conditional branch, but rather
expects the calling code to have set them as a side effect
of DoDownCount. The root cause of our bug was that
JitArm64::WriteExceptionExit was calling DoDownCount before
Check(External)Exceptions instead of after.
2020-11-29 14:01:14 +01:00
Léo Lam d043c5f81d
Merge pull request #9153 from iwubcode/qt_custom_tooltip
Remove description box in graphics tabs and use custom tooltips instead
2020-11-29 12:37:31 +01:00
Léo Lam 361bf25cf8
Merge pull request #9254 from flagrama/fallback-region-selection
Fallback Region Option
2020-11-29 00:19:15 +01:00
Léo Lam 738e1a6dbb
Merge pull request #9297 from JosJuice/movie-game-id-comparison
Movie: Fix 83b9fef regressions
2020-11-29 00:09:30 +01:00
JosJuice 5642772ec4 Movie: Fix 83b9fef regressions
1. Comparing string_views does not behave the same as strncmp
   in the case where SConfig's game ID is longer than 6 chars.
2. DTMHeader::GetGameID wasn't excluding null bytes for game IDs
   shorter than 6 chars.
3. == was accidentally used instead of !=.
2020-11-28 23:35:55 +01:00
Léo Lam cf32c4d479
Merge pull request #9296 from JosJuice/issue-12327-workaround
JitArm64: Add a workaround for issue 12327
2020-11-28 22:44:37 +01:00
JosJuice d2a34fdab7 JitArm64: Add a workaround for issue 12327
This issue is both severe and surprisingly difficult to find
the root cause of, so I think it would make sense to add a simple
hotfix for now. https://bugs.dolphin-emu.org/issues/12327
2020-11-28 22:35:49 +01:00
Vincent Cunningham db5aec019c
Add Fallback Region to configuration menu
Fallback Region
A user-selected fallback to use instead of the default PAL

This is used for unknown region or region free titles to give them
the ability to force region to use. This replaces the current fallback region
of PAL. This can be useful if a user is trying to play a region free
tilte that is originally NTSC and expects to be run at NTSC speeds. This
may be done when a user attempts to dump a WAD of their own without
understanding the settings they have chosen, or could be an intentional
decision by a developer of a ROM hack that can be injected into a
Virtual Console WAD.

Remove using System Menu region being checked in GetFallbackRegion

Use DiscIO::Region instead of std::String for fallback

Add explanation text for Fallback Region
2020-11-28 15:40:21 -05:00
Léo Lam c0f7f91507
Core: Fix an assertion that mistakenly uses a fmt format string
Unfortunately, adding a DEBUG_ASSERT_MSG_FMT isn't actually possible
right now because of compiler bugs:
https://github.com/dolphin-emu/dolphin/pull/9284

We could require a newer version of GCC (10) but that would require
updating GCC on the build machines.

For what it's worth, older versions of GCC (8, 9) are broken in
many ways: adding constexpr to some Matrix functions causes GCC 8
to generate bugged code that causes the Wii IR pointer to disappear,
which means that the generated builds are already unusable
(see https://dolp.in/i12324).

Additionally,  we've already had to add workarounds for those versions
in the format macros to fix compilation bugs. This time, it looks like
workarounds won't cut it; even applying the workaround
described in https://github.com/fmtlib/fmt/pull/1580 does not help.
2020-11-28 21:11:27 +01:00
iwubcode cc837a59d6 Core / DolphinQt: Add ini only option to force low-contrast tooltips 2020-11-28 11:49:14 -06:00
Sepalani 20ebed51bb IP/Top: Add Android network interface 2020-11-27 19:10:28 +04:00
Léo Lam 9b03cdf93e
Merge pull request #9101 from sepalani/fix-ip-fallback
IP/Top: Fix fallback IP address
2020-11-27 02:39:15 +01:00
Lioncash 978e5469af Core: Remove commented out logs
Commented out logs shouldn't be kept around, since it makes performing
renames and migrations harder, as tooling generally doesn't inspect
comments.
2020-11-26 07:49:37 -05:00
Léo Lam e00572dd07
Merge pull request #9282 from lioncash/core-log5
Core: Convert logging over to fmt pt.5
2020-11-26 02:06:41 +01:00
Léo Lam d573ce34d7
Merge pull request #9281 from AdmiralCurtiss/iofile-write-string
IOFile: Replace fprintf with WriteString/fmt.
2020-11-26 01:39:56 +01:00
Admiral H. Curtiss 45d4746a5d IOFile: Replace all fprintf string writing with calls to WriteString. 2020-11-25 22:11:21 +01:00
Lioncash ef75e9acd8 Core: Convert logging over to fmt pt.5
Converts the remaining PowerPC code over to fmt-capable logging.

Now, all that's left to convert over are the lingering remnants within
the frontend code.
2020-11-25 13:23:48 -05:00