The usage of "Wii Remote" and "Wiimote" in the interface is inconsistent. "Wiimote" is also not a real word nor is it an official product name. Therefore I have changed instances of "Wiimote" in the UI to instead say "Wii Remote". I also made a couple of minor grammatical changes as well.
This is mostly a resubmission of #4338 but there are some minor other changes as well.
I didn't know that telling that you don't schedule from the CPU thread prevents an assert because it by default assumes you use the CPU thread, but in the case of ClearCacheThreadSafe, it's used from the GUI thread.
Commit 4969415 modified calls to GetInterpolationQualifier, but mistakenly changed the order of some boolean parameters: GetInterpolationQualifier(true, false) was changed to GetInterpolationQualifier(…, false, true).
Should fix#9783.
Currently, `g_controller_interface` is initialized and shut down by each
of `GCKeyboard`, `GCPad`, `Wiimote`, and `HotkeyManager`.
This 1) is weird conceptually, because it necessitates passing a pointer
to the native window to each of those classes, which don't need it, and
2) can cause issues when controller backends are initialized or shutdown
multiple times in succession.
For Wii graceful shutdown to work, the emulated software has to open
the STM event hook and install a hook. Without this, there is no way
to inform them about the shutdown, so trying to do a graceful shutdown
and requiring the use of the shutdown fallback (exiting a second time
to force) is pointless.
Previously Dolphin would only exit if the main window is closed,
and Confirm on Stop is enabled.
This makes Dolphin's behaviour more consistent by always exiting
if the main window is closed or on shutdown signal.
s_dvd_thread_done_working makes the logic more complicated,
and degasus pointed out a race condition that can happen if
the CPU thread calls WaitForIdle right in between the DVD
thread executing done_working.Set() and done_working.Reset()
while there is work left to do. To avoid this, let's just get
rid of s_dvd_thread_done_working. It's a relic from the old
DVDThread design. Thanks to the last few commits, WaitUntilIdle
only gets called rarely (disc change and savestate), so it's
not a problem if WaitUntilIdle ends up being slower.
This is a preparation for adding a queue to DVDThread.
Currently, s_read_request and s_read_result act somewhat like
queues that only can contain one object.
This would previously fail to compile when included in files that do not
include FileUtil.h due to lack of a type declaration.
This moves the constructor and destructor into the cpp file in order to
satisfy the requirements of unique_ptr construction and deletion. That is,
unique_ptr requires a concrete type at the point of construction and
destruction. If the constructor or destructor is left in the header, then
at the point of construction or destruction, IOFile will still be
considered an incomplete type, as unique_ptr's deleter will still only be
able to see the forward declaration, which it can't use.
Unless I'm misreading the code, it doesn't look like this serves any
purpose, and is only polluting the logs.
_Unimplemented_Device_ looked like a device name that was picked to
be used somewhere else in Dolphin, but this doesn't seem to be the case
since 2012 (d95e31a removed the only other usage of this fake device).
Unifies the creation of all the menus into the main frame class.
Now it isn't spread out across the main frame and the code window.
This doesn't alter the placement of the handling functions, as this would
involve unrelated changes, since it would require modifying where
window-related variables are placed. This will be amended in a follow up
changeset.
Keeps related menu items together based on top level menu. This will be
more convenient in the future when debugger menu bar item handling is
moved to CFrame, as it won't be a huge amount of code in one function.
This also makes it easier to locate menu bar code whenever it needs to be
changed.
4319 made Dolphin not read/write directly to the SYSCONF and read
settings from the SYSCONF at boot, and only write Dolphin settings
to the SYSCONF at emulation startup.
However, this also made it a bit confusing, because if settings were
changed, then Dolphin was exited without starting a game in between,
the settings wouldn't actually get persisted. This is fixed by
syncing Dolphin settings with the SYSCONF when Dolphin exits.
Instead of directly reading/storing settings from/to the SYSCONF, we
now store Wii settings to Dolphin's own configuration, and apply them
on boot. This prevents issues with settings not being saved, being
overridden and lost (if the user opens a dialog that writes to the
SYSCONF while a game is running).
This also fixes restoring settings from the config cache after a
graceful shutdown; for some reason, settings were only restored
after a normal shutdown.
Fixes issue 9825 and 9826
Using u8 as indexers is kind of silly, since the rest of the public API
essentially uses int for this sort of thing. Changing these to int also
gets rid of quite a few implicit truncations.
This also allows for getting rid of similar silliness in the netplay API.
There's no official implementation of the Vulkan API,
and Dolphin currently isn't set-up to work with the
single, commercially-available third-party implementation.
This is done to remove confusions among potential debugger users and to also make it more accurately tell what this feature is actually doing. Despite being true that it is using a memcheck (and it certianly checks that memory), the idea being to break on a memory access isn't really obvious especially considering that memchecks are also used in full MMU emulation to handle exceptions. It also doesn't help that memchecks are now supported in every builds.
It also changes the corresponding log because this log would be wanted by the user which means it should be more obvious that it was caused by the "memory breakpoint".
This is an issue because a driver may have to maintain two copies of a
texture if it batches all uploads together at the start of a frame.
In the Vulkan backend, we do something similar to avoid breaking out of a
render pass to copy a texture from the streaming buffer to the destination
image.
This was causing issues in the sms-bubbles fifolog, where an EFB copy to
the same address of a previously-used texture caused the previous texture
to be re-used again for a different image later on in the frame, causing
the original contents to be discarded.
Using cmake and GCC, logs would contain the full file path when logging making logs lines unnecessarily long. This is solved by just removing anything before "/Source/Core/" (where / is whatever your OS uses to separated directory).
This happened when the source texture was an EFB copy, therefore it had
not been populated prior to the draw command buffer being executed, and
the conversion was occurring in the init command list.
Setting a single icon at a single resolution doesn't scale well,
Windows requires a 16x16 icon for the window and a 32x32/48x48 for
the taskbar. Providing all icons produces less pixellated results at
HiDPI.
Changes:
- MemoryWindow was cleaned up and gives more feedback on searches.
Some bugs were fixed as well:
- A complex bug that allowed tearing off tabs and opening multiple
copies of a debug panel which lead to segfaults
- Another segfault related to right-click menus on code/memory views
when those tools were floating in their own window.
Resolved "TODO" for Texture Cache safety, added explanation message.
Resolved "TODO" for default description, no longer uses default text for sizing
Fixed a memory leak in PostProcessingConfigDiag where it was never freeing any
of the objects it allocated in its constructor.
Minor design change to PostProcessingConfigDiag to give padding around elements
consistent with the rest of Dolphin's user interface (5px).
Changed the Cheat Search tab to disable the scan buttons while there is
not a game running and enable when it starts. Also added double-click to
create code to the result list.
Required a partial rewrite of the image loading code because it was working in
unscaled wxBitmaps. Needed to make it produce wxImages and scale them instead.
And related ARCodeAddEdit/PatchAddEdit.
Change ISOFile to use wxImage instead of wxBitmap since bitmaps require
a screen context and banner images have a fixed resolution.
Some OSD messages were displayed in RenderBase.cpp using global variables and some code duplicated
in OnScreeDisplay.cpp.
Now all messages are displayed using functions in the OSD namepace.
* OSDChoice and OSDTime global variables are gone
* All OSD logic is kept at the same place
* All messages are properly aligned
* Clean characters for all OSD messages
Original commit:
commit f0ec61c057
Author: Aestek <thib.gilles@gmail.com>
Date: Sun Aug 7 16:08:41 2016 +0200
Add a context menu entry in main game list to host a netplay game
based on saved settings.
Original commit:
commit 91aaa958e6
Author: Aestek <thib.gilles@gmail.com>
Date: Sun Jul 24 14:51:37 2016 +0200
There was a bug that caused MemoryView to indirectly cause a segfault;
the simplest way to reproduce it is 1) start a game; 2) stop the game;
3) click on the Refresh button and watch Dolphin segfault.
This commit fixes it by only calling PowerPC::HostIsRAMAddress when
emulation is running.
It doesn't make much sense to prefix g_ to static variables and for
some to be completely unprefixed.
Also renames a lot of other variables for the new conventions
This fixes an issue where the Bluetooth info section could be fully
filled up by syncing 5 Wiimotes in passthrough mode then switching to
emulated Bluetooth; emulated Wiimotes were then unable to be used.
The "real" SYSCONF section is now backed up before being replaced with
a blank section that the emulated BT adapter can always fill with 5
Wiimotes without issues.
This backup is restored by the passthrough code, instead of during
the Bluetooth mode switch because this should be done regardless of the
user interface, and even without UI (if the config file is edited
manually).
Homebrew programs seem to rely on getting a reply to the vendor
specific commands, without which Bluetooth initialisation will never
complete.
This vendor-specific command is typically used to patch the Wii's
Bluetooth module, so the replies are only faked when the passed through
adapter is not a Wii Bluetooth module.
This stores the address of paired devices and associated link keys.
It is needed because some adapters forget all stored link keys when
they are reset, which breaks pairings because the Wii relies on the
Bluetooth module to remember them.
It doesn't fix adapters that can't remember any link key
at all and always return 0 for the number of stored/written link keys.
For those adapters, there is no fix.
This also improves the usability of passthrough mode for adapters that
already work, since pairings will now keep working even if the link
keys get cleared by something else (for example by the host Bluetooth
stack).
The ControllerConfigDiag design was getting confusing, so more
significant changes needed to be done.
Firstly, the GC controller and the Wiimote section layouts have been
aligned for consistency.
The Balance Board source chooser is a checkbox.
The "general settings" that affect the SYSCONF have been moved to the
Wii pane in the Config dialog. It makes more sense because those
affect the Wii's settings in the NAND, unlike the other options.
Another reason for moving it is that the Controller Config Dialog was
getting pretty crowded, and the whole section is disabled when
emulation is running, which is wasted space.
The Wiimotes section is now organised by two radio buttons. One is for
the Passthrough Mode, with sync/reset buttons under it; the other is
the emulated Bluetooth mode, which still has the regular Wiimote source
choosers, the Continuous Scanning controls and the Enable Speaker Data
option (which only applies to the emulated BT mode).
Hopefully this should make things a bit clearer and look cleaner.
(This is a monolithic commit because separating UI changes is hard)
Apparently, Nintendo's Bluetooth stack expects the ACL packet buffer
size to be limited to 10.
Reporting anything higher than that could cause memory corruption,
which can result in warning messages in the logs ("event mismatch"),
and more annoyingly, random disconnects.
Thanks to shuffle2 for the fix!
This adds the ability to passthrough a whole Bluetooth adapter and skip
the majority of the Bluetooth emulation code. We use libusb to send HCI
commands, receive HCI events and transfer ACL data directly to the
first adapter that is found or to a specific adapter (if configured to)
This is possible because the Wii's Bluetooth module is actually just
a pretty standard Bluetooth adapter…
…except for two vendor-specific commands, for which replies are faked,
and also for the sync button. This adds a hotkey that works in the
exact same way as the sync button would on a Wii: it triggers an HCI
event, which emulated software interpret as a command to perform
a BT inquiry.
This commit also changes the UI code to expose passthrough mode
and WII_IPC_HLE to be a bit more thread safe (for the device map).
This moves the unordered_map used to store connected Wiimotes IDs to
WiimoteReal, and makes the ID insert/erase logic common so we don't
have to duplicate this code in scanner backends.
The Balance board detection logic is already implemented in a simpler
way in Wiimote::IsBalanceBoard() (since hidapi also needs it).
Therefore, IOWin now only needs to check if a device is a Wiimote.
This is intended to make reconnecting Wiimotes easier with a DolphinBar.
Unfortunately, this change isn't enough as it doesn't always catch
disconnections for Wiimotes connected with a DolphinBar.
But it's better than nothing and eventually a disconnection will be
detected when something tries to write to the Wiimote, instead of never.
There is no other solution as the DolphinBar always exposes 4 HIDs even
when the associated Wiimotes are not connected.
We could try to detect this using the fake input reports sent by the
DolphinBar, but this only works for the first HID (probably because of
a bug in the firmware?), so this method is not an option.
If FindWiimotes() took more time than the UI shutting down, the scanner
would try connecting a Wiimote and sending an event to the UI code
long after it has shut down, which causes a segfault.
This fixes the race by ignoring any found Wiimotes during shutdown.
Normally this would have never happened, but it is possible with hidapi
since Wiimotes can be connected before Dolphin starts.
wxWidgets causes a segfault if Host_ConnectWiimote is called and we try
to create an event from the Wiimote scanner thread while the GUI is
still initialising.
Based on ca0c2efe7a. Credits go to flacs.
However, unlike the original commit, hidapi does not completely replace
the current implementations, so we can still connect Wiimotes with 1+2
(without pairing).
Also, it is only used on Linux and OS X for now. This removes the
advantage of having only one implementation but there is no other
choice: using hidapi on Windows is currently impossible because
hid_write() is implemented in a way that won't work with Wiimotes.
Additionally:
* We now check for the device name in addition to the PID/VID so we can
support the Balance Board and maybe third-party Wiimotes too. This
doesn't achieve anything with the DolphinBar but it does with hidraw.
* Added a check to not connect to the same device more than once.
Should fix a possible reference to deleted framebuffers, as well as fixing
the issues with the render area being correct if the game's source area
changes, or auto-scaling is enabled.
Same thing but allows both GeckoCode and Code to be utilized directly
without predicates for equality/inequality in stardard algorithms
The size check for std::vectors is unnecessary, as this is built into std::vector's operator==
Because of the way this works, randomly overwriting the handler
when loading a savestate will break things because of the
self-modifying nature of the handler.
GeckoCodes require address hooks which don't correspond to any
symbol in the symbol table. The hooks get deleted when repatching
the game because they did not persist across calls to
HLE::PatchFunctions.
Dolphin emulates GeckoCodes by fiddling with the CPU state when a
VI Interrupt occurs. The problem with this is that we don't know
where the PC is so it's non-deterministic and not necessarily
suitable for use with the codehandler.
There are two options: Patch the game like Gecko OS either directly
or using HLE::Patch, or use a trampoline so we can branch from any
PC even if it would otherwise not be valid. The problem with Gecko OS
patches is there are 10 of them and they have to be configured
manually (i.e. Game INIs to would need to have a [Core]GeckoHookType
property).
HLE_Misc::GeckoReturnTrampoline enables the Code Handler to be
entered from anywhere, the trampoline restores all the registers that
had to be secretly saved to the stack.
If the installation fails because codehandler.bin is missing or
unusable then Dolphin will try again every single frame even though
it's highly unlikely a disk file will have changed. Better to just
fail once then only try again when the active code set is changed.
Suppresses generating 60 log messages per second.
Turns out one of the magic numbers was very magic. The gameid is
an ad-hoc comm protocol with HLE_Misc to control the number of times
the ICache is reset.
The code table builder cuts off the end of codes that won't fit
after already writing part of it. That seems quite unlikely to
work the way anyone would find useful since the codes can contain
actual PPC instructions.
Jules Blok