This reverts commit d23fd17e1a.
Dynamic sampler indexing is broken in VK_NV_glsl as of 385.41. The
performance gap doesn't seem to be as wide with the updated driver, so
to save maintaining two code paths, it's easier to just drop the
extension support completely.
ImgTec's driver uses a major.minor@changeID versioning system
This is packed into a double so "1.9@4850625" becomes "109.4850625"
The next release brnach is expected to be 1.10, hence the need for 2
digits for the branch minor.
The changeID should be unique for each build, but is shared over all
branches, so only makes sense to compare withing a branch.
It's likely branch 'major' versions will be used for major hardware
revisions, and the drivers for both maintained in parallel. Thus it
may not make sense to compare versions between different major
verisons - if/when this happens we can hook up a DriverDetails::Family
as needed.
This optimisation doesn't work on PowerVR's Vulkan implementation. We
(incorrectly) disallow Framebuffer objects to be used with a different
load or store op than that which they were created with, despite the
spec allowing such.
This fixes the windwaker intro "smearing"
The class NonCopyable is, like the name says, supposed to disallow
copying. But should it allow moving?
For a long time, NonCopyable used to not allow moving. (It declared
a deleted copy constructor and assigment operator without declaring
a move constructor and assignment operator, making the compiler
implicitly delete the move constructor and assignment operator.)
That's fine if the classes that inherit from NonCopyable don't need
to be movable or if writing the move constructor and assignment
operator by hand is fine, but that's not the case for all classes,
as I discovered when I was working on the DirectoryBlob PR.
Because of that, I decided to make NonCopyable movable in c7602cc,
allowing me to use NonCopyable in DirectoryBlob.h. That was however
an unfortunate decision, because some of the classes that inherit
from NonCopyable have incorrect behavior when moved by default-
generated move constructors and assignment operators, and do not
explicitly delete the move constructors and assignment operators,
relying on NonCopyable being non-movable.
So what can we do about this? There are four solutions that I can
think of:
1. Make NonCopyable non-movable and tell DirectoryBlob to suck it.
2. Keep allowing moving NonCopyable, and expect that classes that
don't support moving will delete the move constructor and
assignment operator manually. Not only is this inconsistent
(having classes disallow copying one way and disallow moving
another way), but deleting the move constructor and assignment
operator manually is too easy to forget compared to how tricky
the resulting problems are.
3. Have one "MovableNonCopyable" and one "NonMovableNonCopyable".
It works, but it feels rather silly...
4. Don't have a NonCopyable class at all. Considering that deleting
the copy constructor and assignment operator only takes two lines
of code, I don't see much of a reason to keep NonCopyable. I
suppose that there was more of a point in having NonCopyable back
in the pre-C++11 days, when it wasn't possible to use "= delete".
I decided to go with the fourth one (like the commit title says).
The implementation of the commit is fairly straight-forward, though
I would like to point out that I skipped adding "= delete" lines
for classes whose only reason for being uncopyable is that they
contain uncopyable classes like File::IOFile and std::unique_ptr,
because the compiler makes such classes uncopyable automatically.
The casts to u32* are technically undefined behavior. The u8* cast is
left, as char/unsigned char is exempted from this rule to allow for
bvtewise inspection of objects (and this is what s8/u8 are typedefs of
on platforms we support).
Improve bookkeeping around formats. Hopefully make code less confusing.
- Rename TlutFormat -> TLUTFormat to follow conventions.
- Use enum classes to prevent using a Texture format where an EFB Copy format
is expected or vice-versa.
- Use common EFBCopyFormat names regardless of depth and YUV configurations.
This way it allows us to use surfaceless contexts in EGL/GLX. It also
ensures that the shared context shares a similar setup to the main
context's framebuffer, potentially reducing the number of variants a
driver needs to generate.
Previously we were falling back to an earlier version of the compiler.
The older version cannot compile our ubershaders without various
graphical issues.
This was mainly included for debugging, but could end up being confusing
for users, as well as polluting the GL program cache with a mix of uber
and specialized shaders if the option was changed.
pSysMem is of the type const void* -- because of this, it makes the
original delete[] call undefined behavior, as deleting a void pointer is
undefined behavior.
Also punning types into existence, like what was done for the stereo
image header is undefined behavior as well. The proper way to do this is
to either manually add all individual bytes manually, or memcpy the
struct into memory.
As we want to deallocate the memory before returning, and because
pSysMem is a const void*, we keep a unique_ptr to the data and just pass
pSysMem a raw pointer to the data.
This is because we re-use BlendingState for our internal drawing (e.g.
RasterFont) and for these shaders, we can't assume the presence of a
second color output.
This removes the need for token pasting, which isn't supported in GLSL
ES. Shouldn't cause any issues unless people are using reserved keywords
as option names.
The loop was allocating one-too-many levels, as well as incorrect sizes
for each level. Probably not an issue as mipmapped render targets aren't
used, but the logic should be correct anyway.
This was a regression from the remove-everything-static-from-renderer
PR. As the comment indicates, it would be nice to move all of this logic
out of the Renderer constructor, but this is a much larger change.
The FrameBufferManager::CreateTexture (from the OpenGL backend) method introduced by commit 69cedf41 incorrectly compares the texture variable (which contains a name provided by glGenTextures) against GL_TEXTURE_2D_MULTISAMPLE_ARRAY and GL_TEXTURE_2D_MULTISAMPLE.
It should instead use the texture_type variable for this (as done in the first branch of the if).
This commit should have zero performance effect if SSBOs are supported.
If they aren't (e.g. on all Macs), this commit alters FramebufferManager
to attach a new stencil buffer and VertexManager to draw to it when
bounding box is active. `BBoxRead` gets the pixel data from the buffer
and dumbly loops through it to find the bounding box.
This patch can run Paper Mario: The Thousand-Year Door at almost full
speed (50–60 FPS) without Dual-Core enabled for all common bounding
box-using actions I tested (going through pipes, Plane Mode, Paper
Mode, Prof. Frankly's gate, combat, walking around the overworld, etc.)
on my computer (macOS 10.12.3, 2.8 GHz Intel Core i7, 16 GB 1600 MHz
DDR3, and Intel Iris 1536 MB).
A few more demanding scenes (e.g. the self-building bridge on the way
to Petalburg) slow to ~15% of their speed without this patch (though
they don't run quite at full speed even on master). The slowdown is
caused almost solely by `glReadPixels` in `OGL::BoundingBox::Get`.
Other implementation ideas:
- Use a stencil buffer that's separate from the depth buffer. This would
require ARB_texture_stencil8 / OpenGL 4.4, which isn't available on
macOS.
- Use `glGetTexImage` instead of `glReadPixels`. This is ~5 FPS slower
on my computer, presumably because it has to transfer the entire
combined depth-stencil buffer instead of only the stencil data.
Getting only stencil data from `glGetTexImage` requires
ARB_texture_stencil8 / OpenGL 4.4, which (again) is not available on
macOS.
- Don't use a PBO, and use `glReadPixels` synchronously. This has no
visible performance effect on my computer, and is theoretically
slower.
This stops the virtual method call from within the Renderer constructor.
The initialization here for GL had to be moved to VideoBackend, as the
Renderer constructor will not have been executed before the value is
required.
This moves all the byte swapping utilities into a header named Swap.h.
A dedicated header is much more preferable here due to the size of the
code itself. In general usage throughout the codebase, CommonFuncs.h was
generally only included for these functions anyway. These being in their
own header avoids dumping the lesser used utilities into scope. As well
as providing a localized area for more utilities related to byte
swapping in the future (should they be needed). This also makes it nicer
to identify which files depend on the byte swapping utilities in
particular.
Since this is a completely new header, moving the code uncovered a few
indirect includes, as well as making some other inclusions unnecessary.
Before #4581, an invocation of `SetBlendMode` could invoke
`glBlendEquationSeparate` and `glBlendFuncSeparate` even when it was
setting `glDisable(GL_BLEND)`. I couldn't figure out how to map the old
behavior over to the new BlendingState code, so I changed it to always
call the two blend functions.
Fixes https://bugs.dolphin-emu.org/issues/10120 : "Sonic Adventure 2
Battle: graphics crash when loading first Dark level".
We (the Microsoft C++ team) use the dolphin project as part of our "Real world code" tests.
I noticed a few issues in windows specific code when building dolphin with the MSVC compiler
in its conformance mode (/permissive-). For more information on /permissive- see our blog
https://blogs.msdn.microsoft.com/vcblog/2016/11/16/permissive-switch/.
These changes are to address 3 different types of issues:
1) Use of qualified names in member declarations
struct A {
void A::f() { } // error C4596: illegal qualified name in member declaration
// remove redundant 'A::' to fix
};
2) Binding a non-const reference to a temporary
struct S{};
// If arg is in 'in' parameter, then it should be made const.
void func(S& arg){}
int main() {
//error C2664: 'void func(S &)': cannot convert argument 1 from 'S' to 'S &'
//note: A non-const reference may only be bound to an lvalue
func( S() );
//Work around this by creating a local, and using it to call the function
S s;
func( s );
}
3) Add missing #include <intrin.h>
Because of the workaround you are using in the code you will need to include
this. This is because of changes in the libraries and not /permissive-
Keeps associated data together. It also eliminates the possibility of out
parameters not being initialized properly. For example, consider the
following example:
-- some FramebufferManager implementation --
void FBMgrImpl::GetTargetSize(u32* width, u32* height) override
{
// Do nothing
}
-- somewhere else where the function is used --
u32 width, height;
framebuffer_manager_instance->GetTargetSize(&width, &height);
if (texture_width != width) <-- Uninitialized variable usage
{
...
}
It makes it much more obvious to spot any initialization issues, because
it requires something to be returned, as opposed to allowing an
implementation to just not do anything.
Hopefully will fix the crash in vkDestroyInstance on the NV Shield TV,
and likely reduce boot times slightly for drivers that take a while
to create instances.
This happened when the geometry shader was disabled, and the uniform
buffer was grown to a larger size. The update would be skipped, leaving
the old buffer to be included in the descriptor set.
This also moves the pipeline and descriptor set layouts used for texture
conversion (texel buffers) to ObjectCache, and shares a binding location
with the SSBO set.
Stenzek