fixed fps display in the top bar, now it shows the real fps of the game.
some code clean up and some corrections to make everything work right in the reference renderer.
multiples xfb now is broken even in single core as is was not an error caused by dual core, i really dono where the error is,everything looks correct but if you test a game with multiples xfb or the ipl you will see the error.
ector if you can take a look at he code and throw me some ideas i'll thank you.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5272 8ced0084-cf51-0410-be5f-012b33b47a6e
the problem is one strange behavior i found, in opengl when xfb is enable, frame limit causes the frame rate to be limited exact half the correct speed, so if you choose auto and the game uses 30 fps you get 15 fps
so in opengl, you have to limit to the exact double of the game speed, 100 to pal games and 120 to ntsc.
in d3d this not happened every time, it just happen when you change some time consuming setting like changing the ssaa or resizing the window, in that case you have to disable and re enable frame limit to get the correct fps
to all the devs please if you can help me debug this, will give you a lot of thanks as i'm short in time to debug this error and is driving me crazy not to find the source of the problem.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5249 8ced0084-cf51-0410-be5f-012b33b47a6e
applied mlkbouba patch to make Mario Strikers Charged Football work (i do not own the game so please test).
some minor tweaks to the plugins to improve performance. for game that do not use xfb the best settings are dual core enabled, audio throtle disabled, frame limit set to the desired value, and xfb off.
change the frameskip calculations to use fps instead of vps as in dual core vps != fps caused by unresolved sync problems, till this problems are fixed the best for game play is calculate times in base of fps.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5239 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented donko's xfb in D3D:
the bad things:
*is solower in some cases, slower as opengl
*it do not work in dual core mode, it seems direct3d has serious synchronization problems, to the other devs please if you can take a look and help me :)
*real xfb still not working i have to give it more time to make it work.
the good:
*games that uses multiples xfbs will work now using the virtual XFB.
*implemented a more hardware like approach to scaling, now to calculate the pixel scaling i use the xfb size not the efb so the screen pixels relation is more correct now.
*simplified a little donko's virtual xfb to make it less memory consuming as xfb textures are the exact size of the scaled xfb and not full target width.
* when it works even real xfb will let us use super sampling.
I repeat this commit is totally unstable and in dual core mode it will for sure hang the emulator or at best give totally incorrect results.
Other devs please help as thread sync is not one of my strong points :)
i'll keep waiting for the comments an the -1 :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5195 8ced0084-cf51-0410-be5f-012b33b47a6e
after some test the more relevant parameters were the color samples and the tlut max size.
so delete the rest of the parameters and define 3 modes:
Safe : the two values are set to 0 meaning all the texture data and all the tlut data are hashed this is the most correct and slowwwwwwwwwww way
Normal: 37 samples are taken from the color textures an the firs 4096 bytes of the tlut are hashed, is a lot faster than safe mode but in some games i observe small glitches.
Fast: 8 samples are taken from the color textures an the first 1024 bytes are hashed from the tlut, is a little slower than the unsafe cache but at least all the games i tested have correct text output and fast frame rate. the glitches in dinamyc color textures are more noticeable in this mode
this values could be improved, if you find a better combination please post it and the game it fixes and i will update the source.
for the moment, as my time is limited by a lot of work, only implemented the d3d gui, if someone can implement the opengl gui will be a lot of help for me.
please test a lot and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5135 8ced0084-cf51-0410-be5f-012b33b47a6e
fixed a misbehavior in the clear code that causes depth clear problems in reference hardware (Intel as example).
add 6 parameters to optimize Safe Texture Cache:
SafeTextureCacheColorSamples, SafeTextureCacheIndexedSamples, SafeTextureCacheTlutSamples:
this 3 parameters gives the number of samples taken to calculate the final hash value, less samples = more speed, more samples = more accuracy
if 0 is specified the hash is calculated using all the data in the texture.
SafeTextureCacheColorMaxSize, SafeTextureCacheIndexedMaxSize, SafeTextureCacheTlutMaxSize:
this parameters limits the amount of data used for the hash calculation, it could appear as redundant but in some games is better to make a full hash of the first bytes instead of some samples of all the texture.
color, indexed, tlut : define the texture type, full color data, indexed, and the tlut memory.
the parameters are available in the config , no GUI at this time, if the test are OK will add it to the GUI.
if someone needs it will give more examples on how to configure the values for specific games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5116 8ced0084-cf51-0410-be5f-012b33b47a6e
sorry to tell but this will bring a speed drop, so let you decide if this change stay or not.( used the fastest open source hash algorithm i know)
do not apply full hashing to other format because it kills the performance.
for popular request added 9x SSAA believe me will kill your graphic card even if is the best but the image quality is exceptional.
as always please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5034 8ced0084-cf51-0410-be5f-012b33b47a6e
implement proper window handling (d3d/sw) which i believe fixes a hang that occurs when a game is stopped (plz test this :)) + some minor stuff
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5030 8ced0084-cf51-0410-be5f-012b33b47a6e
reverted a tiny leftover of my safe texture cache commit
D3D
renamed the SSAA modes to use samples as MSAA now they are 2,25x and 4x.
OpenGL:
fixed a nasty logical bug introduced in 4984 that causes efb corruption when efb to texture is used
re enabled shader caching as it was not producing errors.
fixed efb misalignment caused by integer rounding still a bit misaligned but many games will look better now
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5020 8ced0084-cf51-0410-be5f-012b33b47a6e
there are only to SSAA modes 1.5x and 2x as they give the best result.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5017 8ced0084-cf51-0410-be5f-012b33b47a6e
improve speed a little in games that have large viewports.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5009 8ced0084-cf51-0410-be5f-012b33b47a6e
true antialiasing using supersampling:
3 modes implemented:
2x = is a one and a half samples supersampled buffer with a linear texture fetch, this produce a similar result of a 2x MSAA
4x = four samples with a aligned texture fetch in the center of the 4 samples, this produce a little best effect that the first mode.
8x = is a four samples with a rotated grid fetching producing a nicer (really nicer in some cases) antialiasing.
please test an let me know if you like this :)
i remember to everyone that supersampling is expensive so don't complain in speed drops :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5006 8ced0084-cf51-0410-be5f-012b33b47a6e
chage the global format of the screenshots to bmp, is correctly supported by both plugins and is faster.
reverted the changes in safe texture cache, will try to make them more stable then commit them, this should fix compilation in linux and macand error introduced in MP games
corrected all the issues commented by ector, thanks for the comments alway is good that the code is revised by others to find missed spots.
please report any remaining issue to solve them.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5001 8ced0084-cf51-0410-be5f-012b33b47a6e
first fixed scaling when updating backbuffer to make it friendly with encoders, now frame dumping must work without errors in any codec.
clean screenshot and frame dumping code now is more correct, faster and stable.
improve safe texture cache, improving the distribution of the hash algorithm, including tlut hash in the final hash of the texture, and making use of a 64 bit hash to make it more accurate.
clean a lot of code and corrected some missused vertex formats when drawing full screen quads.
and biggest change last:
implemented pseudo antialiasing: a image post-process algorithm that mimics antialiazing and is fare more easier to implement in this scenario.
you can change the intensity of the effect changing the values of the antialiasing combo. the right value depends on the game.
for example mkwii looks awesome with 8x.
please try all the changes and let me know the results.
if something is broken, please let me know and will fix it asap.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5000 8ced0084-cf51-0410-be5f-012b33b47a6e
Basic usage: "sudo scons install=global install"
Hopefully this doesn't break builds on Macs. I have tested this on linux and windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4994 8ced0084-cf51-0410-be5f-012b33b47a6e
rewrite frame dumping and screen shots to make them more stable and correct
enable viewport resizing for all cards, the emulation is more correct in this way
test this a lot please.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4971 8ced0084-cf51-0410-be5f-012b33b47a6e
if a degenerated primitive is passed to the VertexManager treat it as a compatible primitive, for example if a 5 vertex quad is passed treat it as a triangle fan.
as crazy at this seems it fix the sun glare in ZWW, please test an d let me know if it make a difference in other games
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4931 8ced0084-cf51-0410-be5f-012b33b47a6e
Center DX9 window
Bring Wiimote reconnect confirm dialog to topmost, now only works with OpenGL.
(It seems DX9 in full screen doesn't like other windows overlapped upon it.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4895 8ced0084-cf51-0410-be5f-012b33b47a6e
in opengl correct an error introduced by mi in efb to ram alignment, it's seems to fix SMS but it missalign a lot of other games, so revert to the default. must solve truncated coins in NSMB.
revert alpha testing values to the values in rev 4812 as they fix some games.
in d3d dynamized the Render target size so it will change at runtime when viewport exceed it size, in the worse case it will cause a missing frame when resizing but in the games I tested is not noticeable at all
This must solve all the remaining viewports problems in nvidia cards, in ati this is not needed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4888 8ced0084-cf51-0410-be5f-012b33b47a6e
in videocommon little fix for the alpha test values, return to the original values as they are more accurate.
in D3D:
huge change in state management, now all the state management is centralized and redundant state changes are eliminated.
Fixed the overlapped viewport error in non ati cards:
the error was caused by this: when a viewport is defined larger than the current rendertarget, an error is thrown and the last valid viewport is used, this is the reference behavior, in ati cards if a larger viewport is defined, no eror is returned, the rendering is valid and is rendered using the projection defined by the viewport but limited to the rendertarget are, exactly like opengl or the GC hardware.
to solve this in reference drivers defined a large rendertarget (2x the size of the original) and proceed to render in a centered quad insithe the larger rendertarget, in this way larger viewports always falls inside a valid rendertarget size, the drawback of this is the waste of resources. it can be dynamized, depending or games or changed at runtime when a oversized viewport is detected, but i live that to future commits.
please test this and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4841 8ced0084-cf51-0410-be5f-012b33b47a6e
Now the frame limiter yields on CPU thread, not as before on GPU thread mistakenly
2. Fixed clear of VI interrupts
I guess VI interrupts are not used at all, because they were never cleared before
3. Made GPU thread 0% processor usage when paused whatever your active config is.
I tried the event approach but somehow the thread resume latency is excessively long (Who can tell me why?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4790 8ced0084-cf51-0410-be5f-012b33b47a6e
All you gotta do is Pause the emulation! That's useful for when your batteries run out during gameplay, for example...
But if you change the WiiMote source (between Emulated, Real or Inactive) you must disconnect and reconnect (Menu Tools -> Connect WiiMote) the WiiMotes affected by the change...
Thanks to jack.fr0st who did all the emulation state notification work!
Now every plugin has a way to know the current emulation state (paused, stopped or playing)
@ayuanx: I thought about doing a PostMessage(g_WiimoteInitialize.hWnd, WM_USER, WIIMOTE_DISCONNECT, current_number); so that the user gets asked to reconnect that WiiMote, trying to avoid having to disconnect and reconnect, but it didn't work because shooting that message only asks to reconnect, doesn't do a disconnect... Do you have any ideas on how to accomplish that?
Also, if anyone could check if Issue 1916 is finally fixed... Or at least when is the cursor being hidden or not...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4789 8ced0084-cf51-0410-be5f-012b33b47a6e
It's really helpful since pairing up using Microsoft's Stack is a real pain!
Thanks to jack.fr0st and sanchez who did most of the work!
Note: IT ONLY WORKS WITH MICROSOFT BLUETOOTH STACK!
Also you should press the Refresh Real WiiMotes button after everything is paired up! (Because it takes a while for the drivers to get installed)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4786 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed Issue 1917
(Since wxWidgets is not allowed in core, so I moved the popup window to CFrame)
*Maybe* this could also fix Issue 1919?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4780 8ced0084-cf51-0410-be5f-012b33b47a6e
Unbreak linux stop on Single Core, remove an unnecessary wait event, fix DSP HLE/DSP LLE/OGL plugin hang on stop when the config dialog has been opened (nJoy and Wiimote still need to be fixed), avoid the CpuThread to be stuck in the efb/swap loop by setting a flag before the thread is actually shutdown (contrary to r4756 which was setting it.. after :D)
Clear the status bar Framerate/Core message when the game is stopped.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4769 8ced0084-cf51-0410-be5f-012b33b47a6e
- It's worth noticing that both in OGL and D3D the Config options for Always and Auto Hide Cursor have no effect. I can't get (read) those values in D3DBase.cpp ...
* Some more key bindings
* Removes duplicate ifdef _Win32 from VKToString
* Made VKToString a little faster (smarter) (but don't expect any speedups though...)
* Corrects Pal60 name in Config (it was Pal6)
I'm still trying to figure out why the Toggle Fullscreen Button doesn't work...
Also I really thought about commiting my changes to Wiimote_real, which are tested and working for 1 real wiimote, but I need someone to test them with more than one real wiimote (I only have one)... See Issue 1876 ...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4757 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Connect/Disconnect Wiimote on the fly, no need to pause game
PS: Toggling full screen by ESC in DX9 doesn't work yet, it will close Dolphin instead at the time.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4754 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add an option to enable the EFB scaled copy *TODO find a better place for it to go.
SOIL - Update stb_image to the latest version (1.16 to 1.18)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4716 8ced0084-cf51-0410-be5f-012b33b47a6e
changed the blending functions for the logic ops emulation, now the accuracy is the best possible with the functions available in D3D.
if someone is interested i'll post how i get this values :) please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4673 8ced0084-cf51-0410-be5f-012b33b47a6e
in D3D and Opengl:
fixed one nasty bug in texture loading where if a dynamic texture keeps his format but the tlut format is changed, the try or reloading the texture in the same texture could cause a hang if the size of the resulting texture is different than the original (size in bytes)
Applied a ugly temporal hack to the texture conversor to solve efb to ram misalignments and effect distortions.
in D3D:
Pseudo implementation of logic ops using basic blending: the first 8 operations are "good approximations", the remaining 8 are bullshit :) if someone have a better approximation to emulate this logic please let me know.
please test if i don't break anything in the process and test Mario kart wee you will get a nice surprise.:)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4656 8ced0084-cf51-0410-be5f-012b33b47a6e
opengl: a little code cleanup and possible speedup in texture recreation.
d3d and opengl :plugins corrected the efb alignment when efb to ram is used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4637 8ced0084-cf51-0410-be5f-012b33b47a6e
No need to use "Sound Loop Hack", so I just removed it.
2. Fixed the WAD game loading issue. What can I say, I have to go though and patch all the WII_IPC_HLE devices to take care of this.
3. Applied tomman's Linux keyboard patch, but I can't test here, no suitable environment.
4. Disabled configuration dialogs when game is running, you have to pause game first to be able to change any configuration. (Which prevents some accidental crash to happen.)
5. Other trivial fixes, no need to mention.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4632 8ced0084-cf51-0410-be5f-012b33b47a6e
D3D: add the EFB Copy option to complete Rodolfo's commit plus add the Overlay FPS and the Disable Fog options
also change the config dialog's behaviour a bit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4622 8ced0084-cf51-0410-be5f-012b33b47a6e
Now efb to ram display correctly but still is misaligned by one pixel
please test and give me feedback
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4618 8ced0084-cf51-0410-be5f-012b33b47a6e
Also reimplemented screen clearing as a color quad to support alpha blending when clearing as in the original hardware.
the funny thing is how is implemented peeking, as locking depth textures is not supported, implemented peeking copying the values form the depth texture to a r32f render target and then reading back the data.
please a lot of testing to this commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4599 8ced0084-cf51-0410-be5f-012b33b47a6e
first part if fixing, fixed, i thing, the flickering that everyone has reported, at least in my case i only have flickering in the one texture in one game and now is fixed. The other fix is not for an reported issue, is more a correctness fix, running dolphin with pix to review debug errors, result in a ton of warnings and error, now with this commit, at least for ati, there no more error or warnings, this means, correct management and state change, no accurate emulation, for this still a lot of work to do.
for this part of the commit please give me feedback and let me know of remaining issues
Te second part is the partial implementation of efb to ram copy in d3d, this won't brake anything because is commented but i commit this to ask for help from ector and donko in some errors remaining in the implementation related to differences between opengl an d3d.
if you want to test this you have to uncomment line 150 to 155 of bpstruct.cpp
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4594 8ced0084-cf51-0410-be5f-012b33b47a6e
D3D: fix the wireframe option getting enabled when using the fullscreen option
and did some code cleanup
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4555 8ced0084-cf51-0410-be5f-012b33b47a6e
corrected a little depth textures still broken but now at least i discover the reason, the ultra bad news for d3d lover is, the only correct way to implement depth textures will be do a firs depth only pass disabling blending.
This is because blending is affecting the values stored in the depth texture, so to store the true values, blending mus be deactivated.
this will degrade performance but is the only "Correct" way in d3d 9. the other possibility is dx10 but that's a complete different story ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4526 8ced0084-cf51-0410-be5f-012b33b47a6e
Implemented all the correct format conversions in efb to texture copy.
replaced all the stretcrect calls with quad draws this must improve speed a bit.
A BIGGGGGGGGGG cleanup in the code and reorganization.
reimplemented zpeek using a secondary render target ( this still is buggy so many issues left)
please a lot off feedback.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4520 8ced0084-cf51-0410-be5f-012b33b47a6e
in direct3d this is different, the only valid values are between 0.0 an 1.0 so fix this and let the shader handle the rest.
please test all this and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4494 8ced0084-cf51-0410-be5f-012b33b47a6e
This is a test, clamp the values to see if this fix the problem, please test a lot don't know if this breaks something else
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4491 8ced0084-cf51-0410-be5f-012b33b47a6e
* clear and flicker problem in d3d, backbuffer clearing was commented out, (if this was on right let me know and I'll revert).
* alpha problem introduced by my modifications to the tev, must been sleeping when i wrote that code, should be fixed now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4471 8ced0084-cf51-0410-be5f-012b33b47a6e
please test specially in paper mario and Killer 7 that where games where supposedly this was used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4470 8ced0084-cf51-0410-be5f-012b33b47a6e
thanks a lot to chaoscode he make possible to test this on nvidia. please test this a lot and give me feedback :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4468 8ced0084-cf51-0410-be5f-012b33b47a6e
d3d: remove the depth texture path it will not work so for now only lockable textures were available. i thing the only way will be a use a secondary render target and do a depth pass to mimic depth textures.
opengl: minor cleanup here and there and a possible fix to issue 1509, but not tested because in my system the errors remarked in the issue don't show.
commond: code reorganization an optimization in the pixel shader generator, trying to understand the tev stages, make some changes to make the generator faster (not much only started for the alpha test and fog).
this changes try start solving the diferences bethen the hardware plugins and the soft plugin.
i hope with i don't brake nothing but please test this a lot.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4465 8ced0084-cf51-0410-be5f-012b33b47a6e
Code cleanup in nJoy i had around for a while, it also adds code to support SDL 1.3's force feedback API and is more stable (will not crash anymore on stop when rumble is enabled)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4459 8ced0084-cf51-0410-be5f-012b33b47a6e
they are extremely hard/driver Dependant so your test is needed.
there plugin will automatically select the path thats work for your hard, need that everyone post the messages that the video init throw (yes all will hate me for the messages) but is the only way to see what is the optimal path. in the next commit will clean the unused paths.
i'm afraid thath the second path is Vista dependant (you need to include vista sdk to make it work).
the third path use lockable depth buffer so there is no change in that.
now peek color is fully working and is fast because the you never lock the the real color texture only the offscreen surface.
please if someone knows a game that use peek color please test it.
also fixed blending so SMS underwater must be fixed.
this work with d3d teach me that i love opengl :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4393 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented buffer format fall back to allow hardware that don't support lockable formats to run the games with Z peeking disabled, applied as well the patch suggested in issue 1494 please give heavy test to this commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4365 8ced0084-cf51-0410-be5f-012b33b47a6e
Opengl:
Reorder the rendering path to make it more generic, and a little bit faster i think.
Reduce the index Buffer size to make it more Friendly to older video hardware.
get rid of the remaining annoying sps (I hope).
D3D:
Implement the same path as opengl to make the plugins more similar and maintainable.
Fixed Peek_Z this means, Pushing stars in SMG Now Works.
Please give heavy testing to this changes and compare the performance with the old path.
Thanks to hrydgard for let me participate :).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4353 8ced0084-cf51-0410-be5f-012b33b47a6e
fixes issue 1421.
D3D: fullscreen use 640x480 if ini setting is invalid
Externals/Memcard Manager: fix build since change to lib files for wx
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4290 8ced0084-cf51-0410-be5f-012b33b47a6e
Also add some code to show the version of the plugin in the plugin configuration window title, so we can see clearly which version of the plugin we are using.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4208 8ced0084-cf51-0410-be5f-012b33b47a6e
Debugger panel is displayed only if Dolphin is started with /d option.
Dump features are not implemented.
Pause/Resume buttons works, only if the plugin is built in DEBUG or DEBUGFAST configuration, not in RELEASE. These features are really only for devs, not for regular gamers.
You will be able to pause frame by frame, or by n frames, or by n primitive flushes. Other pausing options are not implemented yet.
When other pausing and dumping features are implemented, debugging will be much easier.
I have changed the DX9 project setting to use unicode character set in order to use wxWidge tools. If this causes Dolphin building problems for you, check your project setting.txt
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4154 8ced0084-cf51-0410-be5f-012b33b47a6e
There is no point of using ////////////////////////////////////////////////////////////////////////////////////////// to show that a section has ended when there is already commenting showing that a new one has started.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4138 8ced0084-cf51-0410-be5f-012b33b47a6e
BTW, this is Rice from emutalk, one of the 1964 emulator authors, and author of Rice video plugin for N64 emulators.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4115 8ced0084-cf51-0410-be5f-012b33b47a6e
Rodolfo Osvaldo Bogado