ec9cf60d6d
Lua - start forms creation library, implement forms.create(), forms.destroy(), and forms.destroyall(). Still TODO: make the forms do something! Also added console.log as an alias to console.output
2012-07-10 19:04:35 +00:00
ca9c27113f
"Never be asked to save changes" config menu item
2012-07-10 17:22:23 +00:00
0791a713a4
Hex editor - remove a todo that is no longer valid
2012-07-09 18:41:59 +00:00
104511c5b7
-Intellivision.cs' constructor initializes the PC to 0x1000.
...
-Set up the "official" memory map - see http://wiki.intellivision.us/index.php?title=Memory_Map
--Things I didn't do:
---Accessibility.
---Additional Occupied Memory Ranges.
---Addresses Available to Cartridges
---Initialize any of the byte arrays.
--Not sure which of these I need to do, but clearly the byte arrays have to be initialized somewhere to something and there's a lot of gaps in this memory map.
2012-07-09 05:29:45 +00:00
36ba018ae0
basic wire-up of Intellivision core
2012-07-08 04:20:53 +00:00
9a86b483d7
Remove speed hack on sound off for NES core, I've been told bypassing the APU isn't TAS safe
2012-07-05 19:27:07 +00:00
a127e2e4f2
Diff => Difference in the View submenu on Ram Watch.
2012-07-05 19:10:12 +00:00
11312699e4
Ram Watch - fix sorting of prev & diff columns based on last change definition
2012-07-05 03:34:05 +00:00
d65bd2bb0c
Ram Watch - better default column widths and fix restore default settings column widths. Fix reseting of Prev column when changing prev definitions
2012-07-05 03:21:39 +00:00
af9690baec
Ram Watch - center diff column
2012-07-05 03:11:33 +00:00
a1ff6164ec
Ram Watch - make new column compatible with old config files
2012-07-05 03:05:23 +00:00
b0b7478b40
Ram Watch - on load, check if Diff should be displayed. Implement prev value options - last frame, and last change (Diff adjust accordingly as well)
2012-07-05 01:58:33 +00:00
a8e3ffa624
Ram Watch - implement Diff column
2012-07-04 23:11:17 +00:00
14f7aab89e
Hex Editor - fix a bug where shift clicking the first address does not highlight properly.
2012-07-04 21:25:34 +00:00
5ce6050cb4
-As frames and subtitles actually occur more than once, I put them on the top of the big if / else if block for ImportText so that it doesn't have to do unnecessary ToLower() and StartsWith("name") calls.
...
-Put frames and subtitles into functions because vec\ gives good advice.
2012-07-04 07:34:52 +00:00
c06a44c495
ImportText now only allows version 3 for .FM2 files.
2012-07-04 06:41:57 +00:00
62e9143fdd
-Made the boolean parsing more consistent.
...
-Subtitle parsing now allows excessive whitespace.
2012-07-03 22:24:24 +00:00
1aa8030cf4
ImportText now works case-insensitively and trims whitespace.
2012-07-03 16:47:08 +00:00
24a27d543a
Fixed the case (should have detected "guid", not "GUID") for parsing the guid, preventing an extra space from showing up in converted FM2 files.
2012-07-03 16:04:17 +00:00
8bc250e7dd
1. Added Atari 2600 to COMMANDS dictionary.
...
2. Added Atari 2600 case when updating virtual pads.
2012-06-30 01:23:02 +00:00
f7fa9f7751
1. Fixed an Atari 2600 mnemonic bug for issue 77. Note that TAStudio is still broken for Atari 2600.
2012-06-30 00:42:42 +00:00
15e63a84ec
oops
2012-06-25 17:42:30 +00:00
9a54ad750a
reorg multiclient source files with an AVOut directory, because there had got to be so many of those in the multiclient root
2012-06-25 17:35:01 +00:00
690fb786a5
Hex Editor - move "nibble" display to a readable place (broken from the header speed optimization)
2012-06-25 03:21:54 +00:00
5f3f6547aa
Hex Editor - on find next/prev focus Hex Editor rather than find box
2012-06-25 03:13:02 +00:00
7291a8ab0f
Hex Editor - ability to increment/decrement frozen addresses. Big Endian and wrapping logic for Increment/Decrementing 2 byte values
2012-06-25 03:10:04 +00:00
b599c69c18
Add VirtualWidth to IVideoProvider and the (numerous) implementations. This is just phase 1, client needs to be updated to utilize this information, and some cores (especially PCE) should be updated in a more involved way to provide better TV emulation.
2012-06-25 02:50:34 +00:00
4d91471bab
Record movie dialog - use filesystem safe name of game when choosing a default name. Fix regression that made default filename not populate in the savefile dialog.
2012-06-25 00:06:07 +00:00
d59b1e82c7
As usual, I forgot to check in new winform files
2012-06-24 03:45:56 +00:00
2d4c6acc04
Hex Editor - implement shift logic to Home/End keys
2012-06-23 21:09:20 +00:00
0d40a40ea4
Hex Editor - add shift highlighting logic to up,down,left,right,pageup,pagedown keys, add multi-highlight logic to tab and shift+tab. Still todo: several other keys.
2012-06-23 20:48:17 +00:00
12e674973d
Hex Editor - implement a find box with Find Prev/Next functions. Also make find highlight all values in the search string when finding a vlue, add Find Next/Prev menu items with hotkeys.
2012-06-23 18:45:01 +00:00
c89b55696a
some text changes to aboutbox
2012-06-21 16:26:26 +00:00
d302db48b7
remove tahomas from the gui--shouldve been unset (use defaults)
2012-06-20 22:29:00 +00:00
8bf9b92949
nes-support mapper 241
2012-06-20 22:24:56 +00:00
a5df44f1a7
why is segoe ui 9 used in the hex editor instead of tahoma 8.25 like everything else ? not anymore
2012-06-20 22:22:33 +00:00
980e23b419
Hex Editor - better window size
2012-06-20 01:01:18 +00:00
985af6f34c
Hex Editor - Find - implement multi-select
2012-06-19 23:44:36 +00:00
11de294bf5
Hex Editor - implement multi-highlight, make freeze/unfreeze, add to ram watch, and copy use all highlighted addresses. Add Copy & Paste to context menu
2012-06-19 02:42:07 +00:00
6bfb4be61c
Hex Editor - fix scroll wheel scrolling broken on last Hex Editor commit
2012-06-19 01:33:32 +00:00
cd6cf72195
"Prev Value as change" and "Display Watches On Screen" now restored by "Restore Default Settings" in Ram Watch.
2012-06-19 00:27:57 +00:00
640269318c
Hex Editor - another tiny speedup by moving something outside the values generation function
2012-06-18 03:39:21 +00:00
b4c10f2e15
Hex Editor - several fps speed up - only draw left column of addresses when needed instead of every frame
2012-06-18 03:34:14 +00:00
b40d0eb199
Update about box to reflect the 1.0.4a release
2012-06-18 02:58:21 +00:00
a6ced95e07
1. Fixed tastudio memory leak. This was accomplished by dropping the oldest saved stats after hitting a size limit (1 GB).
...
2. Changed StopOnEnd to StopOnFrame. This expands the functionality so that you can tell the emulator to run and then stop at a predetermined point.
3. Expanded the functionality of RewindToFrame to handle more cases. Now you can go back or even forward to a frame and it handles the execution and greenzone appropriately.
4. Due to the change in structure some code was changed to check the index of the first and last saved states in the greenzone rather than relying on the size of the saved state list.
5. Changed the list of saved states in the movie log from a list of byte[] to a list of structures (the structure has an int for the index and byte[] for the state).
6. Saved an init state in the movie log. This is used to go back to the beginning if the beginning of the movie is no longer in the list of saved states.
7. Expanded the AddState and SetFrameAt logic in the movie log to account for the fact that the size of the saved state list is now capped.
8. Fixed a bug in the log interpretation for SMS.
9. Fixed a bug in the sms virtual controller, buttons 1 and 2 were hooked to the wrong objects.
10. Fixed the tastudio listview to show lag as pink.
2012-06-18 01:36:38 +00:00
4435b58c0b
fix messages (e.g. savestates) anchored to bottom or right of window
2012-06-17 23:07:57 +00:00
a4cbce89f0
VideoWriterChooserForm: save config
2012-06-17 15:09:53 +00:00
766737ca63
FFmpegWriterForm: save config
2012-06-17 15:04:41 +00:00
714c090e86
Add GoodNES 3.14's 'good dump' of Lagrange Point to gamedb
2012-06-17 13:42:09 +00:00
16d0afa607
update version to 1.0.5 interim.
2012-06-17 00:05:50 +00:00
61fe30b316
Oops, also add natt
2012-06-16 23:51:48 +00:00
5f76625939
About box - updated version and release date, add pasky13 and link_7777 as contributers
2012-06-16 23:50:29 +00:00
bcef8e62d7
Hex Editor - fix bug where highlighting highlights the row above, was broken by my last Hex Editor commit
2012-06-16 23:11:43 +00:00
42c9a78047
Add FFmpegWriterForm, dialog choosing what ffmpeg format to write to
...
Fix some error handling and cleanup
2012-06-16 16:51:47 +00:00
21b1bde8af
forgot part of the config serializer fix checkin
2012-06-15 19:55:11 +00:00
713a016704
"Previous Value" and "Change Counts" options moved to a new View submenu for Ram Watch.
2012-06-14 00:00:53 +00:00
f69fc08012
Redesign a/v writer selection. A simple dialog is shown with a list of all IVideoWriter possibilities
2012-06-13 19:50:50 +00:00
e1a3f687b5
NutMuxer.cs: add actual pts-based stream interleave code
...
FFmpegWriter.cs: use NutMuxer to create a muxed raw AV stream to send ffmpeg, so ffmpeg can output audio and video from a single stdin pipe
2012-06-13 17:22:45 +00:00
36860f5c16
NutWriter.cs: fix overwrite on existing file
2012-06-13 15:49:58 +00:00
45b8b38d22
JMDWriter.cs: fix overwrite on existing file
2012-06-13 15:42:19 +00:00
eea900a99f
Added color option to the new address header in the hex editor.
2012-06-13 02:44:19 +00:00
ac96d4cc4a
Hex Editor - draw header only as needed rather than every frame, 1-2 fps speedup
2012-06-13 02:18:34 +00:00
c22ba4da32
Lua - gui.drawpixel - make color optional (and default to black if not specified)
2012-06-13 01:09:21 +00:00
f7d66d4924
Hex Editor - prevent sound stutter when opening Color config dialog
2012-06-13 00:21:11 +00:00
16a24df692
Added initial values to the HexEditor color globals (left this out in my last commit).
2012-06-12 03:54:40 +00:00
48e2f8c7dd
Added Highlight, Freeze, and Freeze Highlight color options in the hex editor. Cleaned out the custom color code from HexEditor.cs
2012-06-12 03:50:25 +00:00
fec1ee0958
fix more memory leaks in lua drawing (rectangle, pixel, line, bezier)
2012-06-12 03:24:15 +00:00
36aed5008e
Ram Watch - when adding a new address, set previous = value
2012-06-12 00:31:22 +00:00
160694a0d4
Set up Watch.cs for Diff.
2012-06-12 00:13:02 +00:00
c2e88829f6
Add NutWriter, which writes uncompressed audio and video to the crappy Nut container. Will be used for piping audio and video at the same time to ffmpeg once it's been tested some more.
2012-06-11 23:24:57 +00:00
c823d6b46a
try fixing lua "buffer overflow" stack corruption crash when GC occurs while calling a cfunction
2012-06-11 22:15:49 +00:00
34dd2812f6
fix lua memory leak (maybe affected today, but the leak is from may 6) and revert some virtuallistview changes which break more things than they fix. it seems .net's listview just happens to blow up internally constantly when its in virtual mode and recover from the exceptions.
2012-06-11 04:20:13 +00:00
da1aebe1ac
Hex Editor - some minor code cleanup including putting highlight colors in the config file for eventually adding to the color picker
2012-06-10 23:34:37 +00:00
c7925d986c
delete display manager threading. fix gdi+ leaks in lua code. add abstracted OSD drawing "blitter" system for sysdrawing/d3d dual compatibility and framework for future use for faster lua drawing.
2012-06-10 23:27:30 +00:00
2574789564
Hex Editor - color picker not modal, move "nibble" display lower to not clash with underline
2012-06-10 22:54:41 +00:00
7ef1151b99
Added a 'Custom Colors' Dialog for the Hex editor tool.
2012-06-10 22:43:43 +00:00
18eee77173
kill a bunch of warnings
2012-06-10 22:38:44 +00:00
b9b18137db
fix a stupid bug
2012-06-10 21:16:23 +00:00
07ad0acdbe
displaymanager experiments for superior vsync
2012-06-10 20:48:04 +00:00
2b5fd9e8d9
display manager speedup-dont use any gdi+ unless absolutely necessary (d3d renderer less sensitive to window size)
2012-06-10 19:52:54 +00:00
7d23581764
Set lastchange to Value in Watch's explicit value constructor to match the change to prev.
2012-06-10 19:33:11 +00:00
a2a98415bf
Ram Watch - show initial value of a watch when it is initially added (from adding it or loading a file). Fixes issue 74
2012-06-10 17:45:20 +00:00
81198cc89f
Hex Editor - add a save as binary option (in addition to the text option)
2012-06-10 17:28:38 +00:00
bac863aa70
Hex Editor - add Copy/Paste functions
2012-06-10 16:34:35 +00:00
646a6c1c58
-Fixed my GetMnemonic crash fix. It's "Null Controller", not "NULL Controller".
...
-Made it so that each new search zeroes out the change count.
--This prevents all non-zero items from starting out with 1 change.
--A similar fix needs to be applied to Ram Watch (Filing issue...).
-Allowed changing data size, endian, and unaligned address setting in the middle of the search and maintaining valid values, fixing Issue 72 (The last open Ram Search issue until my "Difference" idea is hopefully accepted).
--Unlike my previous model, this does not align unaligned addresses; all it does is change the size / endian and PeekAddress.
--It does remove unaligned addresses, however, if you have it set to.
--This version converts System Bus instantly whereas the previous version stopped responding.
2012-06-10 04:32:25 +00:00
51547d208a
no blurry presentation on ati cards by setting minify filter to point. to be honest, i cant fathom why this fixed it, since we're magnifying, not minifying. maybe its auto-aniso heuristic was getting triggered. further research: setting card to fixed 2x aniso disables heuristics and would have fixed this issue, since the correct mag filter (point) would get chosen as we specified. however this fix is still technically correct.
2012-06-10 03:53:32 +00:00
5b86a9c375
emergency measures to return display thread stuff to the way it was before (i think? i hope?) as a reasonable baseline when no video pipeline fanciness is called for (no lua overlay, for instance) so that this is useful for gaming again. also add a toggle for the entire HUD system which bypasses some extra work for people stuck in sysdrawing mode who need more speed.
2012-06-10 02:19:36 +00:00
966509858d
disable old debug code in FFmpegWriter.cs
2012-06-10 02:09:37 +00:00
32d163e409
add FFmpegWriter, pipes data to ffmpeg for encoding. Only handles video directly; audio is saved as .wav file separately (via WaveWriterV).
...
ffmpeg parameters cannot be set at the moment, defaults to x264 rgb lossless in mkv
2012-06-10 00:53:19 +00:00
3451d3391e
Refactor readword/dword similarly to Ram Search
2012-06-09 22:56:08 +00:00
e025ca99bf
Hex Editor - Find - start searching from highlighted value so that multiple find calls go to the next value. Show highlighted value in input box by default.
2012-06-09 22:45:24 +00:00
e2bc6db3a4
new build of ffmpeg from http://ffmpeg.zeranoe.com/builds/
...
supports rgb x264, which can be quite useful for emulator dumps
2012-06-09 22:18:44 +00:00
2580489986
Refactored previous parameter in CompareTo and ComparePrevious from strings to enums.
2012-06-09 22:10:39 +00:00
b2c9171b90
Hex Editor - Find option, allows you to enter a series of hex values and search ram for this combination
2012-06-09 22:04:09 +00:00
c0d5437ff4
Ram Watch - revert "fix" to watch count display, make watch list count update in appropriate places, don't count separators in watch count, fix cosmetically be showing "watch" instead of "watches" when there is 1 address
2012-06-09 21:57:00 +00:00
376ffd3ba4
-Refactored what zeromus wanted me to and nothing more.
...
-The number of watches in Ram Watch is now updated in UpdateValues instead of LoadWatchFile, meaning that it's updated every time items are added / removed.
--Also noticed that separators count as watches. Filter these out and exclude them from the count, adelikat?
2012-06-09 21:43:02 +00:00
14b5a4204b
Ram Search - specific value box - only show hex in uppercase
2012-06-09 16:37:03 +00:00
45fb9571eb
Play Movie - fix browse button and drag & drop
2012-06-09 16:28:01 +00:00
0eae1a07fc
Watches - cleanup PeekAddress() some
2012-06-09 14:18:28 +00:00
1fbf9940c9
make peek/poke word/dword make some semblance of sense
2012-06-09 08:44:27 +00:00
1c5a5a5ac3
Seemingly fixed the casting problem.
...
-UGLY REDUNDANT UGLY REDUNT UGLY REDUNDANT (Especially for DoSpecificValue() and DoPreviousValue()).
-I tested every possible scenario for the aforementioned abomination and it seems to work.
-I applied SignedVal and UnsignedVal to the comparison functions for sorting, the ToString functions, and specific value and previous weedings. I don't think there's any other places where this is an issue.
TODO:
-Try my mid-search data size conversion code again.
--Use it on System Bus and see if it is as slow (Not Responding) as it was previously now that 3 lists have been removed.
--Try allowing unaligned addresses and see if that makes any difference.
-Convince adelikat that moving "Prev value as change" to its own data item and column ("Differences" seems more appropriate) is the only sensible way.
-Maybe move all of the previous definitions from Ram Search to Ram Watch (With the exception of "Since last Search" of course.
-Perhaps allow the viewing / hiding of more columns on Ram Watch / Search.
2012-06-09 08:29:31 +00:00
06d4017b07
Unsigned / signed conversion for the Specific Value now works for word / dword.
...
-Well, dword is broken in general because of casting, which will hopefully be fixed soon...
2012-06-09 06:52:04 +00:00
720193b50f
-Cleared the sorted column whenever the previous definition, data size, data type, or endian changes because these options might place the values out of order.
...
--Well, data size and endian don't, but they will once these changes take effect in the middle of a search.
-Previous can now be defined as the last change, fixing the enhancement shown in Issue 73 (Ram Watch equivalent might come later).
-Fixed unsigned sort.
2012-06-09 06:40:11 +00:00
f02d28fb38
Ram Search/Watch, Hex Editor - improve some code efficiency, tiny speedups if any
2012-06-09 05:34:01 +00:00
f716caeae5
Temporary fix for the ROM loading crash issue. Will report if it crashes again.
2012-06-09 02:24:19 +00:00
3b54bd268a
-Useful refactoring!
...
--prevList, undoPrevList, and redoPrevList removed. All of the definitions for previous are now stored in separate data items.
---Should yield small speed increases.
---Makes it easier to port these definitions to Ram Watch eventually.
---Auto-aligns data, making it impossible for issues, such as the original values not aligning with the correct values because the prevList wasn't recreated, impossible.
---Makes it possible for the field to automatically update when the definition is changed (Implemented).
--Value/PrevToString() now use the same code.
--Reduces redundancy.
---This was a problem as PrevToString wasn't taking into account the data type, whereas Value was. This is now fixed.
-Watch now stores the data for the "last change" previous definition. Now I just have to set up the option in the GUI.
2012-06-09 01:56:56 +00:00
eefb41f0b3
-Added message saying that the data type has been converted when you change the data type.
...
-Moved the "Included mis-aligned" box to data size where it should be.
2012-06-08 18:59:20 +00:00
e5972f1368
Fixed Issue 44. I created two new lists, undoPrevList and redoPrevList which are updated / restored in the same places as their counterparts with prevList instead of searchList.
2012-06-08 06:23:33 +00:00
3aaf57802c
Fixed Issue 43. In hindsight, the problem was very obvious: "Since last frame" uses searchList while the other options use prevList, and only the former ever got sorted!
2012-06-08 05:15:07 +00:00
4a6fed75d9
ConvertListDataType now converts all of the lists.
2012-06-08 02:25:24 +00:00
67a9f86c78
-Fixed GetSpecificValue(), which means that signed searching works now.
...
-Upon changing data type, the contents of the specific value box converts accordingly.
2012-06-07 23:17:22 +00:00
cff7ba6d24
nes-fix lagrange point, including sound
2012-06-07 20:52:49 +00:00
38d22b8549
Exlude => Exclude. >_<
2012-06-07 20:24:29 +00:00
5a678f96d8
Fixed Issue 69 by properly chucking the invalid lines out of watch files instead of trying to get out of range substrings and parsing non-numbers as integers. Also, as the newly stored SystemID has yet to be accounted for in any way, I made the parser skip those lines. Not sure if there's something Ram Watch should do with this data as it seems like the SystemID is more accurately defined by the core currently running.
2012-06-07 18:41:39 +00:00
cb4c45eb70
1. Upgraded insert and delete functions in tastudio to support multiple selection.
...
2. Fixed issues with the light blue current frame pointer in tastudio
3. Removed a totally useless index that was being kept seperately in the movie log.
4. Moved the tastudio update after the check to see if the rest of the saved state list is valid.
5. Changed some function/variable names related to the movie log for clarity.
2012-06-07 04:47:54 +00:00
93b266838c
Add drag & drop for lua and luases files to main window. Allow multiple lua script drop to console and main window
2012-06-07 03:41:45 +00:00
c8d07a5078
Ram Watch/Search - add System ID to .wch files
2012-06-07 03:16:25 +00:00
7e1ccc4faf
Update gamedb entries for Neutopia 1 & 2
2012-06-04 22:25:43 +00:00
a9eeac6d64
Lua - fix bug that was causing lua functions to duplicate each time a lua script was toggled or opened, eventually causing crashes.
2012-06-04 02:33:34 +00:00
fe369e0455
pce: alter handling of reading $1FF402 irq status port, fixes Aldynes intro freeze
2012-06-03 20:09:09 +00:00
775845184c
update ROM header detection algorithm. Fixes some homebrew roms which have no header and aren't padded to a multiple of 1024 bytes.
2012-06-03 05:39:30 +00:00
c7db5fd543
1. Fixed an issue that prevented going into the movie finished state properly.
...
2. Relegated a memory leak to tastudio.
2012-06-03 04:04:13 +00:00
1275744b14
Disabling unchecked greenzoning for now
2012-06-03 01:18:13 +00:00
8ca6b24614
Cheats, Lua, Ram Search/Watch - flag changes when adding a separator, default to SaveAs if saving a new file, allow Save in menu item in this scenario
2012-06-02 22:06:00 +00:00
393dd9dcfe
Ram Watch/Search, Hex Editor - set endian based on the endianness of the memory domain by default
2012-06-02 21:48:09 +00:00
0a0c4b43ae
Hex Editor - add Go to Address to the context menu
2012-06-02 21:18:21 +00:00
a74fbb84fe
Fix Ram Poke for Ram Watch/Search dialogs
2012-06-02 21:07:29 +00:00
6578371bca
Hex Editor - remove poke context menu item, since there is no need for it, just type in the values!
2012-06-02 18:49:06 +00:00
2e5547806d
Ram Search - add View In Hex Editor menu item to the context menu
2012-06-02 14:38:35 +00:00
d6479e5613
These changes are TAStudio related.
...
1. Added a list of save states to the movie log.
2. Added corresponding support functions for the save states.
3. Added double click to the list view to load a previous frame.
4. Added a context menu to the list view with insert and delete.
5. Fixed some issues with the green zone of valid state history.
6. Fixed an input bug that I had unwittingly created, as well as issues with the nes log format.
2012-06-01 05:49:26 +00:00
986774f5ee
Multiclient menu - moved many toggles from the GUI to the Enable submenu. Also fixed a taborder mistake in the hotkey config dialog
2012-05-31 01:51:47 +00:00
820875fbae
Multiclient menu - disable the movie, avi, and screen shot menus when no ROM is loaded
2012-05-31 01:13:25 +00:00
9d5e4d9451
Fix so that rewind only sends bizhawk into play mode if it was in record mode previously
2012-05-30 00:52:08 +00:00
c813cd853b
Fixed a rewind buffer problem. A recent hack started the rewind buffer by saving the state after frame 0 to the start of the rewind buffer. This fix saves the state to LastState at the end of the rom load. This way the rewind buffer starts with a diff between the state after rom load and the state after frame 0.
2012-05-28 04:59:22 +00:00
9a1e18045e
Fixed rewind to still work if there is no active movie.
2012-05-28 03:32:27 +00:00
0118b34b41
Slight UI fixes - show mapped hotkey for Open TAStudio on TAStudio menu item, fix alignment of a few boxes in the hotkey config
2012-05-28 03:09:47 +00:00
bf325ec082
Fixed TAStudio read-only mode button to change the movie mode instead of changing the read-only flag which has a different meaning.
2012-05-28 01:50:16 +00:00
520dfcb37b
Revert SetReadOnly() function
2012-05-28 01:29:43 +00:00
f7ee1dbbf3
Added an image for the TurboFastForward button which was entirely forgotten in my previous commit.
2012-05-28 00:56:51 +00:00
fc0ec832ae
These changes are for TAStudio upgrades. If I've broken other stuff please yell at me.
...
1. Hooked up Fast Forward, Fast Forward to End
2. Made a placeholder for Turbo Fast Forward.
3. Fixed rewind to not stomp on the previous frame with new input.
4. Fixed rewind to stop at the beginning of the movie instead of freaking out.
5. TAStudio now shows data from the most recent frame.
6. CommitFrame is called even if not recording so played back frames also show up in TAStudio.
7. Play mode only stops at the end of the movie if you tell it to. Your emulator normally continues to play with no input after the end of the movie.
8. TAStudio is now updated after a rewind (even though the rewind doesn't play a new frame).
9. Split the tools update into before and after updates.
10. Going into read-only mode adjusts the movie mode.
11. Implemented New, Open, Save, and Save As for TAStudio.
12. Fixed an issue where frames past the end of the log would default to the input from the last frame of the log.
13. Fixed a problem where you couldn't rewind to frame 0.
14. Fixed a scrolling issue in the TAStudio list view.
15. Fixed an issue with the TAStudio virtual NES controller not matching up with the log.
16. Fixed an issue where the NES reset button would get held in when rewinding.
17. Added/Modified a couple of button graphics.
2012-05-28 00:44:27 +00:00
bd3e576614
Move Help menu back to its intended location
2012-05-20 15:37:01 +00:00
147caec758
GameboyHawk - Skip BIOS menu option
2012-05-19 15:17:32 +00:00
b08d338761
Gameboy - make debugger useful by connecting it to the multiclient events
2012-05-19 13:33:45 +00:00
abba87738f
Fix input config for Gameboy, some small random work on ColecoHawk
2012-05-18 22:57:05 +00:00
42715fdca7
rehabilitate the GB core: fix videoprovider and input system
2012-05-18 18:28:12 +00:00
9c5f56308b
Gameboy - fix the assigning of the active controller/autofire controller when loading a gameboy core (fixes crash when attempting to run a gameboy game)
2012-05-16 03:14:50 +00:00
7ab8fe087a
Fixed drop down labels in RAM Watch and Search.
2012-05-12 07:07:34 +00:00
23b3cedf7d
Removed the now redundant TargetZoomFactor scaling for drawRectangle. Drawn shapes now scale nicely. Whether or not text should be drawn this way is a worthwhile discussion IMO, but as zeromus has said, it would require text to be drawn in the same way like shapes.
2012-05-11 21:11:29 +00:00
78a0494708
add WavWriter, writes standard WAV files for capture. For the moment, only available as its own IVideoWriter (that discards all video frames). Choose by selecting .wav format in the start avi capture file select dialog.
2012-05-11 17:00:44 +00:00
b35ab0d936
Add JMD to config.cs, and fix whitespace on JMDWriter.cs.
...
My editor whitespace settings are correct now, I promise!
2012-05-10 00:38:26 +00:00
a313d3910d
Add sound output to sound card while dumping is occurring. Uses a proxy ISoundProvider (DualSound.cs) to guarantee emulation sound core and dumping routine are unaffected, while sending "best effort" sound to system output. Doesn't sound great, but simple and functional.
2012-05-09 20:21:23 +00:00
35a9edc018
Refactor JMDWriter to be a bit less painful to read
2012-05-09 15:08:57 +00:00
d0ada9dbb3
AviWriter.cs: be informative if worker thread dies
2012-05-09 01:00:16 +00:00
d70a4e0a9c
clarify some comments and add more comments to JMD code
2012-05-09 00:15:59 +00:00
1980011952
Add user interface to select compression options (level and number of threads) for JMD dumper.
2012-05-08 22:19:12 +00:00
037870eb43
Select between JMD and AVI at save file dialog.
2012-05-07 23:18:08 +00:00
ab6f9b175f
Add JMDWriter.cs, dumps to JMD format. No 2G limit, and single segment even across multiple resolutions. Can use a bunch of cores, but still not terribly fast. Hasn't been hooked in to the UI yet; for testing, change MainForm.cs:2669
2012-05-07 21:45:25 +00:00
de0cdf1c3c
add sharpziplib for gzip so we can make portable JMD dumping without relying on the native 7z.dll
2012-05-07 18:42:43 +00:00
cdd82cbb06
Rename VideoWriter IVideoWriter per zeromus
2012-05-06 22:18:16 +00:00
02ca0e82e9
Create new interface VideoWriter, which AviWriter inherits from. Sets up for other video dumping systems.
2012-05-06 22:08:47 +00:00
857d0a5b39
voila, "emu" resolution lua drawing, hacked in place of the native resolution drawing because rolanmen1 decided to destroy my surface management paradigms (i can tell because the earth is scorched with spaces instead of tabs)
2012-05-06 07:09:04 +00:00
05157997f1
-Added a very basic fix to the graphics scaling issue per adelikat's advice.
...
--Gets worse as the scale increases.
--For x3, the box doesn't increase size, but the box still changes position. I think there might be a difference between the TargetZoomFactor and the actual screen size, so perhaps we should tie this to something else.
-Working on very small optimizations to the NES PPU with CorruptedSyntax...this is more fun, so we'll do this first.
--Eliminated an entire loop.
--Branched to two loops instead of branching for every iteration in one loop.
--Got rid of some redundant instructions using temporary variables.
--This may be completely premature, but I seem to have gained a few FPS from doing this. For me, I get 38-39 FPS where I'd previously get 33-34.
2012-05-06 04:09:28 +00:00
059aebec8e
ColecoHawk - set up ROM loading (bind .col to Coleco), set up preliminary controller garbage in 85 places for coleco
2012-05-06 00:54:13 +00:00
604a774118
Add 2 SMS homebrew and a GG prototype to gamedb
2012-05-05 22:43:11 +00:00
d964558856
Multithreaded AviWriter.cs
...
Moves calls to AVIStreamWrite() to a separate worker thread. They are where all of the cpu time for video compression is used, so can give a decent speedup. Could conceivably go slower on pathetic single core machines due to synchronization and copy overhead.
2012-05-05 14:52:23 +00:00
9b9a8546a5
Deleted the ClearDisplaySurface functions. If you just need to clear the graphics, call gui_ClearGraphics function in LuaImplementation.
2012-05-01 15:15:19 +00:00
2799d55f4a
Now gui.drawNew and gui.drawFinish doesn't need to be invoked via Lua Scripts. However they are invoked every frame. Basically, this means that graphics are drawn and cleaned every frame. So, if you Pause/Stop a script, the graphics gets cleaned right away.
2012-05-01 14:43:17 +00:00
22eec9c4d7
Archive Chooser - put (U) [!] roms at the top of the list
2012-04-30 01:26:37 +00:00
54d1c873df
Fix when guitext gets cleared, reduces most of the flickering and inconsistencies with ram watch on screen and lua gui.text, fix punchoutstats lua script
2012-04-30 01:14:23 +00:00
e60ba05e66
Gui.text - fix inverted default fore/back colors, fix lua scripts to use new gui.text parameter scheme
2012-04-30 00:45:37 +00:00
e0dc96abdc
GUI Text / Ram Watch on screen display - fix inverted foreground and background colors
2012-04-30 00:30:44 +00:00
fffe30f4f9
Atari - add a version of Magicard to the gamedb
2012-04-29 19:40:28 +00:00
25c2e45da8
movies - use Global.Game.System not Global.Emulator.SystemId for the System header when recording a new movie
2012-04-29 14:18:10 +00:00
38dd7889b3
Input Config - hide Enabled checkbox since we have no intention of supporting the disabling of a controller at this time.
2012-04-29 14:06:24 +00:00
5e91cc2a7e
TAStudio - clear holds menu item & context menu item, clears all buttons pressed on the virtual pads
2012-04-29 13:25:35 +00:00
8df4ac18bd
Play Movie Dialog - show warnings on mismatches for system, movie version, and emu version
2012-04-29 13:11:33 +00:00
d9134ac6ce
TI-83 add a bunch of rom versions to gamedb, mark bad dumps accordingly, and display the version number when displaying the rom name
2012-04-29 03:58:06 +00:00
3d10431a2b
Atari - implement console switches (as menu items)
2012-04-29 02:48:33 +00:00
3bcaa8f2e6
gui.clearGraphics implemented. This will allow the user to clear the graphics whenever he wants. I also created a function ClearDisplaySurface that is used to clear the graphics whenever the user stops a scripts.
2012-04-27 20:15:07 +00:00
56b8d6d55e
gui.drawImage implemented. It needs a Path, X and Y Points, Width (optional) and Height (optional). If Width or Height are null, their value will change to the original Width/Height. As with gui.drawIcon, the Path needs double backslash (\\).
...
Take in mind that if the image have transparent background, the background will be drawn in transparent.
2012-04-26 03:41:31 +00:00
fd9005f361
gui.drawIcon implemented. It draws an Icon file (Path to File) in the specified X and Y Coordinates. It has 2 optional parameters, Width and Height. You can't resize the icon to be bigger than it's original size, only smaller. Oh, and Path must have double backslash (\\).
2012-04-25 20:34:50 +00:00
93335d287a
Fixed gui.alert anchoring. Since do.gui.text now have more parameters, it didn't worked.
2012-04-25 19:58:17 +00:00
cb3e0ec666
Applied the renames for "minimum buttons pressed", "minimum buttons inputted".
2012-04-25 04:56:48 +00:00
f637f5f400
gui.text now has a line color parameter.
2012-04-24 15:23:56 +00:00
cefc803425
gui.text now accepts BackgroundColor parameter. I didn't had enough time to check stuff, so i will check more deeply some other time.
2012-04-24 03:57:23 +00:00
d62b2d98e1
Hotkeys - add Open TAStudio hotkey
2012-04-24 00:11:58 +00:00
1fc010ad56
Record Movie Dialog - make filename text box default to the game name, and change save file dialog to populate from this text box not game name
2012-04-22 14:04:10 +00:00
2aeedf074e
Fix Load/Save Named State to default to the correct savestate path rather than the most recently used path. Fix so that these functions can not be accessed during Null emulator via hotkey
2012-04-22 13:56:34 +00:00
75b5ec9223
redo revision 2168, this method also fixes the issue of loading a non-movie state while a movie is loaded, but also doesn't break the parsing of the savestate frame value in CheckTimeLines
2012-04-22 13:38:12 +00:00
27239847c0
Fix so that the Save Config menu item does not close tool dialogs
2012-04-21 22:46:48 +00:00
8711c49819
Cheats - on screen message when Disable All Cheats is performed.
2012-04-21 22:42:32 +00:00
c112573c30
Atari - fix recording/playback & input display of 2 players
2012-04-21 18:27:37 +00:00
1e3b38538d
fix a surface GC churn bug in display manager
2012-04-21 17:21:09 +00:00
aecd849eb5
Show svn revision number in about boxes
2012-04-21 15:25:47 +00:00
e43b53aba8
NES Graphics Config Dialog - limit last line to 239 instead of 240 (prevents crash)
2012-04-21 15:13:42 +00:00
152f6f37e8
Added a HitBox Script for SMB2U, it runs but still a bit buggy.
2012-04-18 15:06:07 +00:00
cf9606eb49
Created 2 functions, GetPen and GetBrush. They will recieve an object variable to return a Pen/Brush of said color, this was made to clean the code of the draw functions.
2012-04-18 14:11:16 +00:00
4db055ce36
gui.drawPie implemted. BizHawk now can make graphics. Quick Example: http://i44.tinypic.com/ibigs2.jpg
2012-04-17 21:41:21 +00:00
ee8ff2c1cf
gui.drawBezier, gui.drawPixel, gui.drawPolygon are all implemented.
2012-04-17 19:58:27 +00:00
733a1e7bc6
gui.drawLine implemented
2012-04-17 17:48:37 +00:00
10a73f777d
gui.drawRectangle now accepts both hex and string. Hex format is ARGB (Alpha, Red, Green and Blue respectively).
2012-04-17 16:12:14 +00:00
68a8dd5f74
Lua - implement gui.drawEllipse()
2012-04-17 03:21:16 +00:00
d156dbe5fc
dont crash when minimized
2012-04-16 22:12:11 +00:00
1f5e4d1046
Replace the "Play" and "Record" messages for movies with Icons.
2012-04-16 21:04:00 +00:00
0fd023dc8c
gui.drawRectangle now accepts Line Color and Background Color. Line Color is mandatory, background is not. If user decides to not specify background color, it won't fill.
2012-04-16 20:47:01 +00:00
839a247bba
Fix input display during lag frames for NES games
2012-04-16 20:19:08 +00:00
a4032aff51
gui.drawRectangle now accepts 4 parameters (X, Y, Width and Height). Should implement Line Color and Background Color as parameters.
2012-04-16 20:04:43 +00:00
48f65ac847
Movie subtitles - implement ability to display multiple subtitles at once
2012-04-16 20:00:11 +00:00
3bae8da0b6
Adjustment to height settings of osd messages, code clean up in movie.cs
2012-04-16 12:17:25 +00:00
35fbe354c1
add threaded display manager to allow heavy OSD/compositing/filtering to happen on another thread. add a lua layer accessible via GDI+ which can be automatically composited and the simplest possible demo of it. add some filtering infrastructure and a hq2x filter set ported to c# but need to work on a minimal selector gui before its usable. separate OSD from RenderPanel so that gdi+ presentation mode now gets full OSD support. the OSD is now a little uglier because its drawn entirely differently and could use some finetuning
2012-04-16 08:18:41 +00:00
0aa08984ed
Add SHA1 to movie headers, Play Movie - highlight sha1 in red when there is a SHA1 mismtach between the movie and the current game.
2012-04-15 03:02:07 +00:00
b3e79aa06f
Fix input chain stuff so that genesis roms can be loaded without crashing client
2012-04-14 16:02:45 +00:00
7b86f66353
nes-oops. now, actually pass all mmc3 tests
2012-04-14 09:40:41 +00:00
73fba31c34
nes-add mapper012 (mmc3 variant, for dragon ball z 5). add concept of mmc3 chip revision variants to mmc3 code and game database, and add proper emulation thereof. pass a bunch of mmc3 tests. simplify (to almost nothing) iNES board detection to correspond to new paradigms of virtual board types. your savestates for mmc3 games are invalidated.
2012-04-14 08:28:42 +00:00
a1d798cc8f
nes-mark banana bad dump variants as bad in gamedb
2012-04-11 18:17:59 +00:00
9f6820b83f
revise nes gamedb to be more organized and useful hopefully with respect to the actual kinds of scenarios we run into
2012-04-07 18:34:05 +00:00
87fa6d5f17
Hex Editor - Context menu - fix "Add to Ram Watch" hotkey display to be Ctrl+W (was left as A)
2012-04-06 02:04:00 +00:00
da2062d373
Atari - add avgn game to gamedb
2012-04-05 23:57:57 +00:00
fd6a1a88da
Emulator Won't Crash When User Loads A State That Is Not Embedded To A Movie
2012-04-05 01:42:24 +00:00
87b455b195
oops
2012-04-05 01:40:30 +00:00
3f6127152f
build lua differently so that it has at least a prayer at interoperating with plug-in dlls. at least, it can load them. there may be other problems later due to the dlls generally being compiled against a different CRT (vc8) than our lua and luainterface (vc10). we could fix this if we needed to by compiling the CUSTOMIZED lua in vc8 and referencing it from the vc10 luainterface.
2012-04-05 01:05:08 +00:00
39e640aee9
gui.cleartext() Implemented. This Function Should Always Be Called After emu.yield() In Order For The Later To Work Correctly.
2012-04-04 20:09:50 +00:00
ea2bdac456
Fix an exception from commit 2161 (Prevent lua script restart when resetting a game). Fixed by making RecentFiles.GetRecentFileByPosition() more robust by not crashing when there is no recent file (returns "") instead
2012-04-04 02:23:47 +00:00
2b9483f68f
Lua Scripts Don't Disable If You Record A New Movie Nor When You Reset The Game. However, It Does When You Load A Different Rom.
2012-04-02 19:50:26 +00:00
2581edc958
Play Movie dialog - include .bkm and .tas regardless, since our matching of current rom is not very robust, make match current game option set to false by default
2012-04-02 01:35:34 +00:00
a18b700664
Bigger hammer fix for drag & drop of movie files
2012-04-02 00:47:52 +00:00
59f92b4c81
TAStudio - atari virtualpads
2012-04-01 18:53:06 +00:00
4c817b20c8
add konami collection games to gamedb so they show as good dumps
2012-04-01 16:25:59 +00:00
557f437195
-As much as I dislike the new joypad.set() setup, the least I could do is make it consistent with joypad.get().
...
--If there is no controller parameter, then all of the buttons are returned as they are stored in the system, just like joypad.set(input) takes button names as is.
--If there is a controller parameter, all of the buttons for that controller are returned without the "PX ", just like joypad.set(input, controller) takes button names without the "PX " and assigns them to the matching buttons for that controller.
--No one approved this change, but seriously, this is common sense. I expect some "change denied" April Fool's stuff tomorrow...
-Implemented a blacklist for ButtonCount. By default, Lag, Pause, and Reset are blacklisted. I don't think any of these buttons should be tracked.
2012-04-01 08:08:40 +00:00
f38073db5c
another movie file extension fix
2012-03-31 15:36:10 +00:00
7e9085b46d
Fix drag & drop of movie files
2012-03-31 15:34:31 +00:00
f3d098a390
Atari - hook up to the default paths
2012-03-31 13:41:00 +00:00
7b0599bfb5
Update version numbers to 1.0.4 (interim) and remove erroneous release notes file.
2012-03-31 01:28:45 +00:00
4c958584f5
Add Lua scripts folder to MakeRelease.bat
2012-03-31 00:44:17 +00:00
ab2e804300
Change default movie extension to .bkm
2012-03-31 00:38:39 +00:00
2eba9e0c71
Atari - console buttons hooked up to mnemonics (input display and movie recording now work)
2012-03-30 23:42:09 +00:00
cb3df74105
Atari - console buttons now work in input config dialog
2012-03-30 23:34:38 +00:00
e4acb65ed1
Controller Config - hook up atari console buttons mostly, still one thing to fix up, currently crashes when trying to save
2012-03-30 22:03:08 +00:00
724fe704fc
Atari - hook up console select and reset buttons to config file. Still TODO: add to input config dialog, modify mnemonics
2012-03-30 16:40:52 +00:00
4240c119b6
Fixed Issue 14, which mentioned that in TAStudio, frame numbers of more than 5 digits don't display properly by default. I fixed this by increasing the width of the Frame column as much as I could without making the section horizontally scroll. This accommodates for 6 digits.
2012-03-30 14:24:40 +00:00
00d25b2355
Fix so main form text field displayed Atari 2600 on atari games. Remove "Hawk" that I added earlier.
2012-03-30 12:26:36 +00:00
52fd33153a
Atari - fix recording and playback of atari resets
2012-03-30 03:43:25 +00:00
8a199f0e3a
Atari - fix the recording of reset
2012-03-30 03:15:36 +00:00
91f5733662
Record movie dialog - if file already exists, confirm overwrite
2012-03-30 00:32:45 +00:00
37d58f1a4f
add a2600 game database
2012-03-29 23:55:10 +00:00
e0d98c8a7f
Fixed: * if a lua script errors it stops, but you can't toggle it back because you can't resume a non-suspended script
2012-03-29 20:22:49 +00:00
720b1cc2ba
Joypad.Set - Added Slot Number As An Optional Parameter
2012-03-29 19:53:16 +00:00
1c6b792a28
Joypad.Set Nox Fixed
2012-03-29 19:16:25 +00:00
4337ea9d63
Joypad.Set() correctly implemented.
2012-03-29 19:03:14 +00:00
5203286f34
Lua - movie.getrerecordcounting() and movie.setrerecordcounting() implemented
2012-03-29 03:16:55 +00:00
andres.delikat
