There are two reasons for this.
1. Using Dolphin's logging system lets the user decide whether
the printout should go to the terminal, the GUI, or a file.
fmt::print always prints to stdout... unless you're on Android, in
which case it does nothing at all, because Android disables stdout.
2. The Windows version of Dolphin crashes when you use fmt::print.
Yes, really. The crash happens because a call to std::fprint in
fmt::v7::detail::fwrite_fully returns that less characters were
written than requested, which fmt handles by throwing an exception.
(As always, Dolphin does not use exception handling.)
I'm not sure why std::fprint is doing this, but since switching
away from using fmt::print is a good idea due to the previous point
anyway, I'd say it's best to just switch.
Previously, s_temp_input was being used for BOTH the savestate's and the movie's input printout in the panic alert.
This commit simply performs memcpy from the correct vector for the movInput printout.
Previously, only the number of total input polls would be shown in the window title when playing back a movie. This simply adds the VI / frame count total as well, which is a much more relevant number to look at while TASing.
Previously, using TAS Input to activate the digital L and R buttons would not show these inputs in the Input Display. This commit adds the digital L and R presses to the Input Display, and also displays just "L" or "R" if the analog is set to 255.
Now that we have enum helpers for inserting values into packets and have
migrated all other enumerations over, there's no need to keep this alias
around any longer.
Over time OnData() has become a huge function-long case statement that
attempts to manage numerous packet-related behaviors, which makes it a
little difficult to reliably ensure certain handling doesn't interfere
with another case's. It's also mildly annoying to navigate due to its
size.
To make it a little easier to read and find the specific behavior, we
can break the relevant pieces of code out into their own functions.
If W0 is locked when fpr.RW is called, the indirectly called
ConvertSingleToDoubleLower may need to emit a push+pop, so it's
better for fresx/frsqrtex to call RW before locking W0 than after.
This way the address check will take up less icache (since it's
only emitted once for each routine rather than once for each
psq_st instruction), and we also get address checking for psq_l.
Matches Jit64's approach.
The disadvantage: In the slowmem case, the routines have to
push *every* caller-saved register onto the stack, even though
most callers probably don't need it. But at long as the slowmem
case isn't hit frequently, this is fine.
In the case of the JitAsm routines, we can't actually use
backpatching. Still, I would like to gather all the load and
store instructions in one place to make future changes easier.
This is a proper fix for the issue that 3071a1d was a workaround for.
It wasn't some kind of bug in the register cache that had laid dormant,
it was a simple mistake made in b24b79e.
Fixes a regression from ecf86bb.
The GPR allocation_order is initialized with only 28 elements,
so the 29th element ends up getting zero initialized.
Very sneaky bug...
Previously in Read_U64 and Write_U64 the value that was read or written
would be truncated to a 32-bit value before being passed off to the
memcheck handler, which can result in incorrect values being logged out.
Lets us simplify SDRUpdated() a little bit.
This also fixes the layout of UReg_SDR1. Turns out this struct has been
incorrect (from a little-endian perspective) the entire time and went
unnoticed, since the union was never used.
These are trivial to resolve.
Converting the structure member into a u32 results in no increase in
structure size, as it's making use of the three extra padding bits in
the structure.
On a real Wii, these constants are normally written by the system menu
(maybe even as part of common SDK code?)
However, they're cleared by IOS whenever a PPC title is launched.
IOS memsets 0x0-0x3fff and then manually writes some constants
in low MEM1. PR #4723 added most of the writes in the 0x31xx region
but left out the four writes to the legacy constant region.
Previously Dolphin didn't actually clear 0-0x3fff so those constants
would stick around after a system menu execution.
011f7789e0 exposed those missing writes.
Prompted by https://dolphin.ci/#/builders/24/builds/985
A 1-character typo in a recent PR caused FifoCI builds to break
horribly and spew millions of panic alerts until buildbot crashed.
This PR adds a new config option -- defaulting to off -- that allows
Dolphin to abort early on when a panic alert occurs instead of
continuing forever.
Optimize division by a constant into multiplication. This method is
also used by GCC and LLVM.
We also add optimized paths for divisors 0, 1, and -1, because they
don't work using this method. They don't occur very often, but are
necessary for correctness.
Makes the enum strongly typed instead of interacting with a raw u32
value. While we're at it, we can add helpers to the NWC24Config to make
using code poke at the internals of the class a little bit less and also
make the querying a little nicer to read.
Currently we were using heap allocating maps that last for the entire
duration of the emulator running.
Given the size N of both of these maps are very small (< 20 elements),
we can just make use of an array of pairs and perform linear scans. This
is also fine, given this code isn't particularly "hot" either, so this
won't be run often.
These functions don't touch any class state, so they can be turned into
internal helper functions.
While we're at it, we can move the enumerations as well.
Although it's not clear what the xA and xB conditions are intended to do, the pattern indicates that xB is the regular version and xA is the inverted version, so for consistency, IsConditionB should be the main function.
Since the merge of b24b79e, we've gotten reports that the
following games are broken on JitArm64:
* Sonic Heroes
* The SpongeBob SquarePants Movie
* Astérix & Obélix XXL
* The Incredibles: Rise of the Underminer
Disabling the register cache avoids the issue, so the cause
of the bug might not actually have anything to do with the
newly implemented instructions. Nevertheless, I don't want
to ship a beta with this problem present, so I would like to
disable these instructions for the time being.
HandleFastmemFault works correctly when faults only happen in
expected locations, but it does some things that are rather
dangerous for faults in unexpected locations, like decrementing
an iterator without checking whether it's equal to begin.
This change cleans up the logic by making m_fault_to_handler's
key be the end of the fastmem region instead of the start.
Hardware testing indicated that SRS uses a different list of registers than LRS (specifically, acS.h can be used with SRSH but not LRS, and SRS does not support AX registers, and there are 2 encodings that do nothing).
* DSP*Arithmetic: Fix grammar for ANDCF and ANDF
* DSP*Arithmetic: Fix registers used by MOVAX and MOV
* DSP*Branch: Fix documentation for JMPR
* DSP*Branch: Fix HALT encoding ("I think I saw a two")
* DSP*ExtOps: Fix 'LN encoding (The listed encoding was for 'L)
* DSP*ExtOps: Improve documentation for 'LD and 'LDAX
* DSPJitExtOps: Correct typo
* DSP*LoadStore: Remove obsolete comment about pc in SRS (This was fixed in 1419e7e5b2)
* DSP*LoadStore: Fix comments for LRR/SRR
* DSP*Misc: Improve documentation for SBCLR and SBSET
* DSP*Multiplier: Fix MULXAC encoding (The previous encoding was for MULXMVZ)
* DSP*Multiplier: Fix tabs in MULCAC and MULCMVZ (There are some other tabs in comments in the JIT, but these are the only ones that are in instruction comments instead of indicating the corresponding interpreter code. Those other comments can be corrected in a different PR, as they're not documentation related.)
* DSPJitMultiplier: Fix MULXMVZ typo
These instructions were already implememented by Dolphin, but never added to the manual. Extension instructions will be handled in a later commit, as wlil instructions that were not previously implememented by Dolphin.
We were using a "value" register to avoid clobbering physical_addr,
but this isn't actually needed anymore. The only bits we need from
physical_addr after we start clobbering it are bits 5-9, and
those bits are identical in effective_addr and physical_addr,
so we can read them from effective_addr instead.
Makes our conversions between the different signs explicit to indicate
that they're intentional and also silences compiler warnings when
compiling with sign conversion or stricter truncation warnings enabled.
The extension needs to happen in SetLongAcc, not GetLongAcc, as the extension needs to always be reflected in acS.h.
There is no functional difference with the write handler for acS.h, but it is more readable than 4 casts in a row.
`IsLess` would incorrectly return true if both `SR_OVERFLOW` and `SR_SIGN` are set, as `(sr & SR_OVERFLOW) != (sr & SR_SIGN)` becomes `SR_OVERFLOW != SR_SIGN` which is true as the two masks are different. This broke in e651592ef5.
This issue only affected the DSP LLE Interpreter, and not the DSP LLE JIT.
I've also included a simple test case for this. `ax0.l` (on the top left) is set to 0 if the instruction following `IFL` does not execute and to 1 if it is executed.
For several reasons:
- It pegs the CPU at 95% for scanning even when Dolphin is idle
- WiimoteScannerHidapi works fine on macOS
- Less macOS code to maintain
When making 92d1d60, I checked whether the ~0x1f masking in dcbx
actually was necessary. I came to the conclusion that it wasn't,
so I removed it. However, I hadn't checked the second half of
InvalidateICache closely enough - the masking is actually needed.
This commit re-adds the masking, but this time in C++ code instead
of in jitted code in order to save icache. Though I suppose the
difference doesn't matter all that much, since this is in farcode
and all...
Hopefully fixes https://bugs.dolphin-emu.org/issues/12612.
This implements the behavior described in
https://bugs.dolphin-emu.org/issues/12565.
Thank you to eigenform, delroth, phire, marcan, segher, and Extrems
for all helping in one way or another with the efforts to reverse
engineer this behavior, and to Rylie for reporting the issue.
Write_U16_Swap leaves the upper 32 bits alone. Reimplementing this
correctly in the JIT would require more than one instruction,
so let's just call Write_U16_Swap instead, like Jit64 does.
One of the following commits will add emulation of a quirk
that only happens when writing to memory which is mapped as
write-through or cache-inhibited, so let's keep track of
which memory is mapped in this way.
This adds about a frame of latency, and since most games don't change
VI registers during scanout, we can get away with outputting the XFB at
the start of scanout. WWE Crush Hour is the (only currently known)
exception, which has flickering problems when doing it this way.
This adds a path to perform the output at the end of scanout, and gates
it behind an option which defaults to using the latency-reducing
pre-scanout path.
Originally, 1479 (for example) would disassemble as `lsr $ACC0, #-7`. At some point (likely the conversion to fmt), this regressed to `lsr $ACC0, #4294967289`. Now, it disassembles as `lsr $ACC0, #7`.
The CPU-side AX library enables it by default and uses hardcoded parameters.
CMD_COMPRESSOR_TABLE_ADDR (0x0A) was incorrect. It's always a nop on the
GameCube and was probably confused with the Wii version.
It was believed that this only mattered when the rounding mode was
set to round to infinity, which games generally don't do, but it
can also affect the sign of the output when the inputs are all zero.
So it turns out you have to pass XMM0 as the clobber register
to HandleNaNs, because HandleNaNs uses BLENDVPD and BLENDVPD
implicitly uses XMM0, and nobody noticed when I broke this in
2c38d64 because nobody plays the one game that needs accurate NaNs.
This reverts commit 66b992cfe4.
A new (additional) correctness issue was revealed in the old
AArch64 code when applying it on top of modern JitArm64:
LSR was being used when LSRV was intended. This commit uses LSRV.
This actually eliminates any setting pertaining to SD cards from the
NetPlay dialog, as it would effectively just be a duplicate of the
setting in the Wii pane, potentially causing confusion.
This also enables save data writing by default, as this is probably
what most players want, and should avoid them losing hours of progress
because they forgot to tick a checkbox.
This implementation is pretty efficient in my opinion. And "As
long as we aren't falling back to interpreter we're winning a lot"
applies to basically every instruction to some degree anyway.
The dcbz instruction needs to lock W30 so that the slowmem code will
push and pop it when calling into C++. Also, the slowmem code expects
that the address is present in W0, so replace the use of W0 as a scratch
register in the fastmem code with the now locked W30.
We currently have a bug when calling Arm64GPRCache::Flush with
FlushMode::MaintainState, zero free host registers, and at least
one guest register containing an immediate. We end up grabbing
a temporary register from the register cache in order to be
able to write the immediate to memory, but grabbing a temporary
register when there are zero free registers causes the least
recently used register to be flushed in a way which does not
maintain the state of the register cache.
To get around this, require callers to pass in a temporary
register in the GPR MaintainState case. In other cases,
passing in a temporary register is not required but can help
avoid spilling a register (if the caller already had a
temporary register at hand anyway, which in particular will
be the case in my upcoming memcheck pull request).
release-ubu-x64 currently fails with "sorry, unimplemented: non-trivial
designated initializers not supported". pr-ubu-x64 doesn't for some
reason, but we might as well remove the designated initializer.
A voice is considered running if and only if `running` equals 1,
not if `running` is not equal to 0.
This fixes https://bugs.dolphin-emu.org/issues/12508 because for some
reason *The Sims 2 - Castaway* sets `running` to 8 when a stream
finishes playing; previously our AX HLE would just loop the voice
and eventually crash after accessing invalid memory addresses.
Thanks to JMC47 and delroth's help, I've verified that this is the
correct check for the following ucodes:
GC:
* 0x3ad3b7ac
* 0x3daf59b9
* 0x4e8a8b21
* 0x07f88145
* 0xe2136399
* 0x3389a79e
Wii:
* 0x347112ba
* 0xfa450138
* 0xadbc06bd
And while I was fixing the running check, I noticed that the is_stream
field was also being handled incorrectly, so I've fixed that as well.
Putting AX functions from AXVoice.h in an anonymous namespace does
successfully prevent compilers from merging those functions and
allows us to avoid ODR violations.
However, tools such as gdb still mix up AX GC and AX Wii functions
and variables because those have the exact same symbol names.
This can be fixed by using inline namespaces which are transparent
at the source code level but forces AX GC and AX Wii symbols to be
different.
The fast path of using CVTSD2SS/FCVTN rounds the significand if it
can't be exactly represented as a single, whereas the accurate path
instead truncates the significand. So we should only use the fast
path if we know that the lower bits of the significand are not set.
This is not known to affect any games.
Passing a width of 64 and registers encoded as double to
DUP resulted in an invalid instruction. The registers should
be encoded as quads in this situation.
Fixes https://bugs.dolphin-emu.org/issues/12575.
Manually encoding and decoding logical immediates is error-prone.
Using ORRI2R and friends lets us avoid doing the work manually,
but in exchange, there is a runtime performance penalty. It's
probably rather small, but still, it would be nice if we could
let the compiler do the work at compile-time. And that's exactly
what this commit does, so now I have no excuse for trying to
manually write logical immediates anymore.
If a branch is unconditional, its target should not be in farcode,
since that defeats the purpose of farcode (putting seldom executed
code in farcode to keep it out of the icache when possible).
Fixes a 58698b8380 regression. (The EXCEPTION_EXTERNAL_INT
immediate being wrong meant that we never took the branch,
masking the problem of the MSR.EE immediate being wrong...)
In cases where we already know that there is an exception,
either because we just checked for it or because we were
the ones that generated the exception to begin with,
we can skip the branch inside WriteExceptionExit.
Unlike most constants we emit in JitArm64, these constants are
*not* inherent to the CPU we're emulating, and can have whatever
values we want. Let's handle them more robustly, in case we
decide to change their values in the future.
SPDX standardizes how source code conveys its copyright and licensing
information. See https://spdx.github.io/spdx-spec/1-rationale/ . SPDX
tags are adopted in many large projects, including things like the Linux
kernel.
This broke ejecting Wii discs while the game is running, as the drive state was set to Ready even when no disc was present, but other code still reported the missing disc, which confused games as you can't be both ready to read and have no disc. That would cause games to show an unrecoverable error screen, instead of a "please insert the game disc" screen.
This only affected Wii games; the GameCube games used regular disc reads which worked fine.
Performance optimization, along with making the code a little
neater. Saves us from performing a single -> double -> single
conversion when calling UpdateFPRFSingle.
If we already have to use a GPR, we might as well take advantage
of the nice immediate encodings provided by GPR ORR. This is
faster, smaller, and saves a register.
JMC47