Some lines of code in Dolphin just plainly grabbed the value of
g_ActiveConfig.iEFBScale, which resulted in Auto being treated as
0x rather than the actual automatically selected scale.
These rely on instance state, or are used within instance-based class
member functions, so they should belong to the instance itself instead
of being file statics.
If we allocate a large amount of memory (A), commit a smaller amount,
then allocate memory smaller than allocation A, we will have already
waited for these fences in A, but not used the space. In this case,
don't set m_free_iterator to a position before that which we know is
safe to use, which would result in waiting on the same fence(s) next
time.
Currently, this is only the logic op bit, but this will be extended to
the framebuffer fetch/blend modes. In the future, when/if we move to
VideoCommon pipelines, this state will be part of the pipeline UID
anyway, and we can mask it out in the backend by using a two-level map,
so the shaders/programs are shared.
ImgTec's driver uses a major.minor@changeID versioning system
This is packed into a double so "1.9@4850625" becomes "109.4850625"
The next release brnach is expected to be 1.10, hence the need for 2
digits for the branch minor.
The changeID should be unique for each build, but is shared over all
branches, so only makes sense to compare withing a branch.
It's likely branch 'major' versions will be used for major hardware
revisions, and the drivers for both maintained in parallel. Thus it
may not make sense to compare versions between different major
verisons - if/when this happens we can hook up a DriverDetails::Family
as needed.
The class NonCopyable is, like the name says, supposed to disallow
copying. But should it allow moving?
For a long time, NonCopyable used to not allow moving. (It declared
a deleted copy constructor and assigment operator without declaring
a move constructor and assignment operator, making the compiler
implicitly delete the move constructor and assignment operator.)
That's fine if the classes that inherit from NonCopyable don't need
to be movable or if writing the move constructor and assignment
operator by hand is fine, but that's not the case for all classes,
as I discovered when I was working on the DirectoryBlob PR.
Because of that, I decided to make NonCopyable movable in c7602cc,
allowing me to use NonCopyable in DirectoryBlob.h. That was however
an unfortunate decision, because some of the classes that inherit
from NonCopyable have incorrect behavior when moved by default-
generated move constructors and assignment operators, and do not
explicitly delete the move constructors and assignment operators,
relying on NonCopyable being non-movable.
So what can we do about this? There are four solutions that I can
think of:
1. Make NonCopyable non-movable and tell DirectoryBlob to suck it.
2. Keep allowing moving NonCopyable, and expect that classes that
don't support moving will delete the move constructor and
assignment operator manually. Not only is this inconsistent
(having classes disallow copying one way and disallow moving
another way), but deleting the move constructor and assignment
operator manually is too easy to forget compared to how tricky
the resulting problems are.
3. Have one "MovableNonCopyable" and one "NonMovableNonCopyable".
It works, but it feels rather silly...
4. Don't have a NonCopyable class at all. Considering that deleting
the copy constructor and assignment operator only takes two lines
of code, I don't see much of a reason to keep NonCopyable. I
suppose that there was more of a point in having NonCopyable back
in the pre-C++11 days, when it wasn't possible to use "= delete".
I decided to go with the fourth one (like the commit title says).
The implementation of the commit is fairly straight-forward, though
I would like to point out that I skipped adding "= delete" lines
for classes whose only reason for being uncopyable is that they
contain uncopyable classes like File::IOFile and std::unique_ptr,
because the compiler makes such classes uncopyable automatically.
Improve bookkeeping around formats. Hopefully make code less confusing.
- Rename TlutFormat -> TLUTFormat to follow conventions.
- Use enum classes to prevent using a Texture format where an EFB Copy format
is expected or vice-versa.
- Use common EFBCopyFormat names regardless of depth and YUV configurations.
This way it allows us to use surfaceless contexts in EGL/GLX. It also
ensures that the shared context shares a similar setup to the main
context's framebuffer, potentially reducing the number of variants a
driver needs to generate.
This was mainly included for debugging, but could end up being confusing
for users, as well as polluting the GL program cache with a mix of uber
and specialized shaders if the option was changed.
This is because we re-use BlendingState for our internal drawing (e.g.
RasterFont) and for these shaders, we can't assume the presence of a
second color output.
This removes the need for token pasting, which isn't supported in GLSL
ES. Shouldn't cause any issues unless people are using reserved keywords
as option names.
The loop was allocating one-too-many levels, as well as incorrect sizes
for each level. Probably not an issue as mipmapped render targets aren't
used, but the logic should be correct anyway.
This was a regression from the remove-everything-static-from-renderer
PR. As the comment indicates, it would be nice to move all of this logic
out of the Renderer constructor, but this is a much larger change.
The FrameBufferManager::CreateTexture (from the OpenGL backend) method introduced by commit 69cedf41 incorrectly compares the texture variable (which contains a name provided by glGenTextures) against GL_TEXTURE_2D_MULTISAMPLE_ARRAY and GL_TEXTURE_2D_MULTISAMPLE.
It should instead use the texture_type variable for this (as done in the first branch of the if).
This commit should have zero performance effect if SSBOs are supported.
If they aren't (e.g. on all Macs), this commit alters FramebufferManager
to attach a new stencil buffer and VertexManager to draw to it when
bounding box is active. `BBoxRead` gets the pixel data from the buffer
and dumbly loops through it to find the bounding box.
This patch can run Paper Mario: The Thousand-Year Door at almost full
speed (50–60 FPS) without Dual-Core enabled for all common bounding
box-using actions I tested (going through pipes, Plane Mode, Paper
Mode, Prof. Frankly's gate, combat, walking around the overworld, etc.)
on my computer (macOS 10.12.3, 2.8 GHz Intel Core i7, 16 GB 1600 MHz
DDR3, and Intel Iris 1536 MB).
A few more demanding scenes (e.g. the self-building bridge on the way
to Petalburg) slow to ~15% of their speed without this patch (though
they don't run quite at full speed even on master). The slowdown is
caused almost solely by `glReadPixels` in `OGL::BoundingBox::Get`.
Other implementation ideas:
- Use a stencil buffer that's separate from the depth buffer. This would
require ARB_texture_stencil8 / OpenGL 4.4, which isn't available on
macOS.
- Use `glGetTexImage` instead of `glReadPixels`. This is ~5 FPS slower
on my computer, presumably because it has to transfer the entire
combined depth-stencil buffer instead of only the stencil data.
Getting only stencil data from `glGetTexImage` requires
ARB_texture_stencil8 / OpenGL 4.4, which (again) is not available on
macOS.
- Don't use a PBO, and use `glReadPixels` synchronously. This has no
visible performance effect on my computer, and is theoretically
slower.
This stops the virtual method call from within the Renderer constructor.
The initialization here for GL had to be moved to VideoBackend, as the
Renderer constructor will not have been executed before the value is
required.
This moves all the byte swapping utilities into a header named Swap.h.
A dedicated header is much more preferable here due to the size of the
code itself. In general usage throughout the codebase, CommonFuncs.h was
generally only included for these functions anyway. These being in their
own header avoids dumping the lesser used utilities into scope. As well
as providing a localized area for more utilities related to byte
swapping in the future (should they be needed). This also makes it nicer
to identify which files depend on the byte swapping utilities in
particular.
Since this is a completely new header, moving the code uncovered a few
indirect includes, as well as making some other inclusions unnecessary.
Before #4581, an invocation of `SetBlendMode` could invoke
`glBlendEquationSeparate` and `glBlendFuncSeparate` even when it was
setting `glDisable(GL_BLEND)`. I couldn't figure out how to map the old
behavior over to the new BlendingState code, so I changed it to always
call the two blend functions.
Fixes https://bugs.dolphin-emu.org/issues/10120 : "Sonic Adventure 2
Battle: graphics crash when loading first Dark level".
Keeps associated data together. It also eliminates the possibility of out
parameters not being initialized properly. For example, consider the
following example:
-- some FramebufferManager implementation --
void FBMgrImpl::GetTargetSize(u32* width, u32* height) override
{
// Do nothing
}
-- somewhere else where the function is used --
u32 width, height;
framebuffer_manager_instance->GetTargetSize(&width, &height);
if (texture_width != width) <-- Uninitialized variable usage
{
...
}
It makes it much more obvious to spot any initialization issues, because
it requires something to be returned, as opposed to allowing an
implementation to just not do anything.
Making changes to ConfigManager.h has always been a pain, because
it means rebuilding half of Dolphin, since a lot of files depend on
and include this header.
However, it turns out some includes are unnecessary. This commit
removes ConfigManager includes from files which don't contain
SConfig or GPUDeterminismMode or GPU_DETERMINISM (which means the
ConfigManager include is not used).
(I've also had to get rid of some indirect includes.)
This fixes the screenshot stutter, as this needs more than a frame.
So we won't stall on the png writing at all until emulation stops or
a new screenshot is requested.
This is needed because for some reason the WSI for NV Vulkan drivers
doesn't return VK_ERROR_OUT_OF_DATE_KHR, so there is no other way to know
that a resize has occured apart from polling, which is a poor solution for
X11 (since it is blocking).
It's not available in OpenGL ES and officially it's not supported on OpenGL 3.0/3.1.
Fallback to old depth range code if there is no method to disable depth clipping.
It's more important to have correct clipping than to have accurate depth values.
Inaccurate depth values can be fixed by slow depth.
In TimeSplitters: Future Perfect, PerfQuery is used to detect
the visibility of lights and draw coronas. 25 points are drawn
for each light. However, the returned count was incorrectly
being divided by four leading to dim coronas.
Using 4x antialiasing was a workaround because of a bug where
antialiasing multiplied the PerfQuery results. This commit
fixes that bug too (but only for OpenGL).
Note: It's not 100% perfect, as some of the GPU capablities leak into the
pixel shader UID.
Currently our UIDs don't get exported, so there is no issue. But someone
might want to fix this in the future.
As much as possible, the asserts have been moved out of the GetUID
function. But there are some places where asserts depend on variables
that aren't stored in the shader UID.
Using glMapBufferRange to read back the contents of the SSBO is extremely
slow on NVIDIA drivers. This is more noticeable at higher internal
resolutions. Using glGetBufferSubData instead does not seem to exhibit
this slowdown.
The D3D backend was always forcing Anisotropic filtering when that is enabled regardless of how the game chose to configure the texture filtering registers; this causes the same issues as "Force Filtering" without Anisotropy, such as causing game UI elements to no longer line up adjacent correctly. Historically, OpenGL's Anisotropy support has always worked "better" than D3D's due to seeming to not have this problem; unfortunately, OpenGL's Anisotropy specification only gives GL_LINEAR based filtering modes defined behavior, with only the mipmap setting being required to be considered. Some OpenGL implementations were implicitly disabling Anisotropy when the min/mag filters were set to GL_NEAREST, but this behavior is not required by the spec so cannot be relied on.
Stenzek