This is an experiment to further reduce the amount we throw into the
exec headers. It might not be as useful as I initially thought because
just under half of the users also need gdbserver_start().
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
The oldest model that IBM still supports is the z13. Considering
that each generation can "emulate" the previous two generations
in hardware (via the "IBC" feature of the CPUs), this means that
everything that is older than z114/196 is not an officially supported
CPU model anymore. The Linux kernel still support the z10, so if
we also take this into account, everything older than that can
definitely be considered as a legacy CPU model.
For downstream builds of QEMU, we would like to be able to disable
these legacy CPUs in the build. Thus add a CONFIG switch that can be
used to disable them (and old machine types that use them by default).
Message-Id: <20240614125019.588928-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The pid field of prstatus needs to be big endian like all of the other
fields.
Fixes: f738f296ea ("s390x/arch_dump: pass cpuid into notes sections")
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <5929f76d536d355afd04af51bf293695a1065118.1718771802.git.osandov@osandov.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
util/bufferiszero: Split out host include files
util/bufferiszero: Add loongarch64 vector acceleration
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZzRoMdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Y7gf/ZUTGjCUdAO7W7J5e
Z3JLUNOfUHO6PxoE05963XJc+APwKiuL6Yo2bnJo6km7WM50CoaX9/7L9CXD7STg
s3eUJ2p7FfvOADZgO373nqRrB/2mhvoywhDbVJBl+NcRvRUDW8rMqrlSKIAwDIsC
kwwTWlCfpBSlUgm/c6yCVmt815+sGUPD2k/p+pIzAVUG6fGYAosC2fwPzPajiDGX
Q+obV1fryKq2SRR2dMnhmPRtr3pQBBkISLuTX6xNM2+CYhYqhBrAlQaOEGhp7Dx3
ucKjvQFpHgPOSdQxb/HaDv81A20ZUQaydiNNmuKQcTtMx3MsQFR8NyVjH7L+fbS8
JokjaQ==
=yVKz
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240619' of https://gitlab.com/rth7680/qemu into staging
tcg/loongarch64: Support 64- and 256-bit vectors
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
util/bufferiszero: Split out host include files
util/bufferiszero: Add loongarch64 vector acceleration
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZzRoMdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Y7gf/ZUTGjCUdAO7W7J5e
# Z3JLUNOfUHO6PxoE05963XJc+APwKiuL6Yo2bnJo6km7WM50CoaX9/7L9CXD7STg
# s3eUJ2p7FfvOADZgO373nqRrB/2mhvoywhDbVJBl+NcRvRUDW8rMqrlSKIAwDIsC
# kwwTWlCfpBSlUgm/c6yCVmt815+sGUPD2k/p+pIzAVUG6fGYAosC2fwPzPajiDGX
# Q+obV1fryKq2SRR2dMnhmPRtr3pQBBkISLuTX6xNM2+CYhYqhBrAlQaOEGhp7Dx3
# ucKjvQFpHgPOSdQxb/HaDv81A20ZUQaydiNNmuKQcTtMx3MsQFR8NyVjH7L+fbS8
# JokjaQ==
# =yVKz
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jun 2024 01:58:43 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240619' of https://gitlab.com/rth7680/qemu: (24 commits)
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
util/bufferiszero: Add loongarch64 vector acceleration
util/bufferiszero: Split out host include files
tcg/loongarch64: Enable v256 with LASX
tcg/loongarch64: Support LASX in tcg_out_vec_op
tcg/loongarch64: Split out vdvjukN in tcg_out_vec_op
tcg/loongarch64: Remove temp_vec from tcg_out_vec_op
tcg/loongarch64: Support LASX in tcg_out_{mov,ld,st}
tcg/loongarch64: Split out vdvjvk in tcg_out_vec_op
tcg/loongarch64: Support LASX in tcg_out_addsub_vec
tcg/loongarch64: Simplify tcg_out_addsub_vec
tcg/loongarch64: Support LASX in tcg_out_dupi_vec
tcg/loongarch64: Use tcg_out_dup_vec in tcg_out_dupi_vec
tcg/loongarch64: Support LASX in tcg_out_dupm_vec
tcg/loongarch64: Support LASX in tcg_out_dup_vec
tcg/loongarch64: Simplify tcg_out_dup_vec
util/loongarch64: Detect LASX vector support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The result has to be done with the signed denominator (b32) instead of
the unsigned value passed in argument (b).
Cc: qemu-stable@nongnu.org
Fixes: 1326010322 ("target/sparc: Remove CC_OP_DIV")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2319
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240606144331.698361-1-chigot@adacore.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit c9274b6bf0 ("target/s390x: start moving TCG-only code
to tcg/") moved mem_helper.c, but the trace-events file is
still in the parent directory, so is the generated trace.h.
Call the s390_skeys_get|set() helper, removing the need
for the trace event shared with the tcg/ sub-directory,
fixing the following build failure:
In file included from ../target/s390x/tcg/mem_helper.c:33:
../target/s390x/tcg/trace.h:1:10: fatal error: 'trace/trace-target_s390x_tcg.h' file not found
#include "trace/trace-target_s390x_tcg.h"
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240613104415.9643-3-philmd@linaro.org>
X86CPU::kvm_no_smi_migration was only used by the
pc-i440fx-2.3 machine, which got removed. Remove it
and simplify kvm_put_vcpu_events().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-23-philmd@linaro.org>
x86_cpu_change_kvm_default() was only used out of kvm-cpu.c by
the pc-i440fx-2.1 machine, which got removed. Make it static,
and remove its declaration. "kvm-cpu.h" is now empty, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-10-philmd@linaro.org>
There can be other confidential computing classes that are not derived
from sev-common. Avoid aborting when encountering them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the same flag generation code as SHL and SHR, but use
the existing gen_shiftd_rm_T1 function to compute the result
as well as CC_SRC.
Decoding-wise, SHLD/SHRD by immediate count as a 4 operand
instruction because s->T0 and s->T1 actually occupy three op
slots. The infrastructure used by opcodes in the 0F 3A table
works fine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SHLD/SHRD can have 3 register operands - s->T0, s->T1 and either
1 or CL - and therefore decode->op[2] is taken by the low part
of the register being shifted. Pass X86_OP_* to gen_shift_count
from its current callers and hardcode cpu_regs[R_ECX] as the
shift count.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use gen_ld_modrm/gen_st_modrm, moving them and gen_shift_flags to the
caller. This way, gen_shiftd_rm_T1 becomes something that the new
decoder can call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These have very simple generators and no need for complex group
decoding. Apart from LAR/LSL which are simplified to use
gen_op_deposit_reg_v and movcond, the code is generally lifted
from translate.c into the generators.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYSENTER is allowed in VM86 mode, but not in real mode. Split the check
so that PE and !VM86 are covered by separate bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already partly implemented due to VLDMXCSR and VSTMXCSR; finish
the job.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All other control registers are stored plainly in CPUX86State.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a bit more generic, as it can be applied to MPX as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like X86_ENTRYr, X86_ENTRYwr is easily changed to use only T0.
In this case, the motivation is to use it for the MOV instruction
family. The case when you need to preserve the input value is the
odd one, as it is used basically only for BLS* instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I am not sure why I made it use T1. It is a bit more symmetric with
respect to X86_ENTRYwr (which uses T0 for the "w"ritten operand
and T1 for the "r"ead operand), but it is also less flexible because it
does not let you apply zextT0/sextT0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes for easier cpu_cc_* setup, and not using set_cc_op()
should come in handy if QEMU ever implements APX.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid using set_cc_op() in preparation for implementing APX; treat
CC_OP_EFLAGS similar to the case where we have the "opposite" cc_op
(CC_OP_ADOX for ADCX and CC_OP_ADCX for ADOX), except the resulting
cc_op is not CC_OP_ADCOX. This is written easily as two "if"s, whose
conditions are both false for CC_OP_EFLAGS, both true for CC_OP_ADCOX,
and one each true for CC_OP_ADCX/ADOX.
The new logic also makes it easy to drop usage of tmp0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUX86State argument would only be used to fetch bytes, but that has to be
done before the generator function is called. So remove it, and all
temptation together with it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes Coverity CID 1546885.
Fixes: 16dcf200dc ("i386/sev: Introduce "sev-common" type to encapsulate common SEV state")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240607183611.1111100-4-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set 'finish->id_block_en' early, so that it is properly reset.
Fixes coverity CID 1546887.
Fixes: 7b34df4426 ("i386/sev: Introduce 'sev-snp-guest' object")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240607183611.1111100-2-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU is started with:
-cpu host,host-cache-info=on,l3-cache=off \
-smp 2,sockets=1,dies=1,cores=1,threads=2
Guest can't acquire maximum number of addressable IDs for processor cores in
the physical package from CPUID[04H].
When creating a CPU topology of 1 core per package, host-cache-info only
uses the Host's addressable core IDs field (CPUID.04H.EAX[bits 31-26]),
resulting in a conflict (on the multicore Host) between the Guest core
topology information in this field and the Guest's actual cores number.
Fix it by removing the unnecessary condition to cover 1 core per package
case. This is safe because cores_per_pkg will not be 0 and will be at
least 1.
Fixes: d7caf13b5f ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache")
Signed-off-by: Guixiong Wei <weiguixiong@bytedance.com>
Signed-off-by: Yipeng Yin <yinyipeng@bytedance.com>
Signed-off-by: Chuang Xu <xuchuangxclwt@bytedance.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240611032314.64076-1-xuchuangxclwt@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only predicate instruction arguments need to be initialized by
idef-parser. This commit removes registers from the init_list and
simplifies gen_inst_init_args() slightly.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-5-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
gen_inst_init_args() is called for instructions using a predicate as an
rvalue. Upon first call, the list of arguments which might need
initialization init_list is freed to indicate that they have been
processed. For instructions without an rvalue predicate,
gen_inst_init_args() isn't called and init_list will never be freed.
Free init_list from free_instruction() if it hasn't already been freed.
A comment in free_instruction is also updated.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-4-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-3-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Before switching to GArray/g_string_printf we used fixed size arrays for
output buffers and instructions arguments among other things.
Macros defining the sizes of these buffers were left behind, remove
them.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-2-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The Hexagon Programmer's Reference Manual says that the exception 0x1e
should be raised upon an unaligned program counter. Let's implement that
and also add some tests.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <277b7aeda2c717a96d4dde936b3ac77707cb6517.1714755107.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
At 09a7e7db0f (Hexagon (target/hexagon) Remove uses of
op_regs_generated.h.inc, 2024-03-06), we've changed the logic of
check_new_value() to use the new pre-calculated
packet->insn[...].dest_idx instead of calculating the index on the fly
using opcode_reginfo[...]. The dest_idx index is calculated roughly like
the following:
for reg in iset[tag]["syntax"]:
if reg.is_written():
dest_idx = regno
break
Thus, we take the first register that is writtable. Before that,
however, we also used to follow an alphabetical order on the register
type: 'd', 'e', 'x', and 'y'. No longer following that makes us select
the wrong register index and the HVX store new instruction does not
update the memory like expected.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <f548dc1c240819c724245e887f29f918441e9125.1716220379.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
=RP7U
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* scsi-disk: Don't silently truncate serial number
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
# FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
# RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
# lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
# 2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
# 9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
# =RP7U
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 08 Jun 2024 01:33:46 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (42 commits)
python: mkvenv: remove ensure command
Revert "python: use vendored tomli"
i386: Add support for overflow recovery
i386: Add support for SUCCOR feature
i386: Fix MCE support for AMD hosts
docs: i386: pc: Avoid mentioning limit of maximum vCPUs
target/i386: Add get/set/migrate support for FRED MSRs
target/i386: enumerate VMX nested-exception support
vmxcap: add support for VMX FRED controls
target/i386: mark CR4.FRED not reserved
target/i386: add support for FRED in CPUID enumeration
hvf: Makes assert_hvf_ok report failed expression
i386/hvf: Updates API usage to use modern vCPU run function
i386/hvf: In kick_vcpu use hv_vcpu_interrupt to force exit
i386/hvf: Fixes dirty memory tracking by page granularity RX->RWX change
hvf: Consistent types for vCPU handles
i386/hvf: Fixes some compilation warnings
i386/hvf: Adds support for INVTSC cpuid bit
stubs/meson: Fix qemuutil build when --disable-system
scsi-disk: Don't silently truncate serial number
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cpuid bit definition for overflow recovery. This is needed in the case
where a deferred error has been sent to the guest, a guest process accesses the
poisoned memory, but the machine_check_poll function has not yet handled the
original deferred error. If overflow recovery is not set in this case, when we
handle the uncorrected error from the poisoned memory access, the overflow bit
will be set and will result in the guest being shut down.
By the time the MCE reaches the guest, the overflow has been handled
by the host and has not caused a shutdown, so include the bit unconditionally.
Signed-off-by: John Allen <john.allen@amd.com>
Message-ID: <20240603193622.47156-4-john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add cpuid bit definition for the SUCCOR feature. This cpuid bit is required to
be exposed to guests to allow them to handle machine check exceptions on AMD
hosts.
----
v2:
- Add "succor" feature word.
- Add case to kvm_arch_get_supported_cpuid for the SUCCOR feature.
Reported-by: William Roche <william.roche@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: John Allen <john.allen@amd.com>
Message-ID: <20240603193622.47156-3-john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the most part, AMD hosts can use the same MCE injection code as Intel, but
there are instances where the qemu implementation is Intel specific. First, MCE
delivery works differently on AMD and does not support broadcast. Second,
kvm_mce_inject generates MCEs that include a number of Intel specific status
bits. Modify kvm_mce_inject to properly generate MCEs on AMD platforms.
Reported-by: William Roche <william.roche@oracle.com>
Signed-off-by: John Allen <john.allen@amd.com>
Message-ID: <20240603193622.47156-2-john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FRED CPU states are managed in 9 new FRED MSRs, in addtion to a few
existing CPU registers and MSRs, e.g., CR4.FRED and MSR_IA32_PL0_SSP.
Save/restore/migrate FRED MSRs if FRED is exposed to the guest.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-7-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow VMX nested-exception support to be exposed in KVM guests, thus
nested KVM guests can enumerate it.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-6-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CR4.FRED bit, i.e., CR4[32], is no longer a reserved bit when FRED
is exposed to guests, otherwise it is still a reserved bit.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20231109072012.8078-3-xin3.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FRED, i.e., the Intel flexible return and event delivery architecture,
defines simple new transitions that change privilege level (ring
transitions).
The new transitions defined by the FRED architecture are FRED event
delivery and, for returning from events, two FRED return instructions.
FRED event delivery can effect a transition from ring 3 to ring 0, but
it is used also to deliver events incident to ring 0. One FRED
instruction (ERETU) effects a return from ring 0 to ring 3, while the
other (ERETS) returns while remaining in ring 0. Collectively, FRED
event delivery and the FRED return instructions are FRED transitions.
In addition to these transitions, the FRED architecture defines a new
instruction (LKGS) for managing the state of the GS segment register.
The LKGS instruction can be used by 64-bit operating systems that do
not use the new FRED transitions.
WRMSRNS is an instruction that behaves exactly like WRMSR, with the
only difference being that it is not a serializing instruction by
default. Under certain conditions, WRMSRNS may replace WRMSR to improve
performance. FRED uses it to switch RSP0 in a faster manner.
Search for the latest FRED spec in most search engines with this search
pattern:
site:intel.com FRED (flexible return and event delivery) specification
The CPUID feature flag CPUID.(EAX=7,ECX=1):EAX[17] enumerates FRED, and
the CPUID feature flag CPUID.(EAX=7,ECX=1):EAX[18] enumerates LKGS, and
the CPUID feature flag CPUID.(EAX=7,ECX=1):EAX[19] enumerates WRMSRNS.
Add CPUID definitions for FRED/LKGS/WRMSRNS, and expose them to KVM guests.
Because FRED relies on LKGS and WRMSRNS, add that to feature dependency
map.
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Message-ID: <20231109072012.8078-2-xin3.li@intel.com>
[Fix order of dependencies, add dependencies from LM to FRED. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
macOS 10.15 introduced the more efficient hv_vcpu_run_until() function
to supersede hv_vcpu_run(). According to the documentation, there is no
longer any reason to use the latter on modern host OS versions, especially
after 11.0 added support for an indefinite deadline.
Observed behaviour of the newer function is that as documented, it exits
much less frequently - and most of the original function’s exits seem to
have been effectively pointless.
Another reason to use the new function is that it is a prerequisite for
using newer features such as in-kernel APIC support. (Not covered by
this patch.)
This change implements the upgrade by selecting one of three code paths
at compile time: two static code paths for the new and old functions
respectively, when building for targets where the new function is either
not available, or where the built executable won’t run on older
platforms lacking the new function anyway. The third code path selects
dynamically based on runtime detected availability of the weakly-linked
symbol.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-7-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When interrupting a vCPU thread, this patch actually tells the hypervisor to
stop running guest code on that vCPU.
Calling hv_vcpu_interrupt actually forces a vCPU exit, analogously to
hv_vcpus_exit on aarch64. Alternatively, if the vCPU thread
is not
running the VM, it will immediately cause an exit when it attempts
to do so.
Previously, hvf_kick_vcpu_thread relied upon hv_vcpu_run returning very
frequently, including many spurious exits, which made it less of a problem that
nothing was actively done to stop the vCPU thread running guest code.
The newer, more efficient hv_vcpu_run_until exits much more rarely, so a true
"kick" is needed before switching to that.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-6-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using x86 macOS Hypervisor.framework as accelerator, detection of
dirty memory regions is implemented by marking logged memory region
slots as read-only in the EPT, then setting the dirty flag when a
guest write causes a fault. The area marked dirty should then be marked
writable in order for subsequent writes to succeed without a VM exit.
However, dirty bits are tracked on a per-page basis, whereas the fault
handler was marking the whole logged memory region as writable. This
change fixes the fault handler so only the protection of the single
faulting page is marked as dirty.
(Note: the dirty page tracking appeared to work despite this error
because HVF’s hv_vcpu_run() function generated unnecessary EPT fault
exits, which ended up causing the dirty marking handler to run even
when the memory region had been marked RW. When using
hv_vcpu_run_until(), a change planned for a subsequent commit, these
spurious exits no longer occur, so dirty memory tracking malfunctions.)
Additionally, the dirty page is set to permit code execution, the same
as all other guest memory; changing memory protection from RX to RW not
RWX appears to have been an oversight.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-5-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bunch of function definitions used empty parentheses instead of (void) syntax, yielding the following warning when building with clang on macOS:
warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
In addition to fixing these function headers, it also fixes what appears to be a typo causing a variable to be unused after initialisation.
warning: variable 'entry_ctls' set but not used [-Wunused-but-set-variable]
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-3-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the INVTSC bit to the Hypervisor.framework accelerator's
CPUID bit passthrough allow-list. Previously, specifying +invtsc in the CPU
configuration would fail with the following warning despite the host CPU
advertising the feature:
qemu-system-x86_64: warning: host doesn't support requested feature:
CPUID.80000007H:EDX.invtsc [bit 8]
x86 macOS itself relies on a fixed rate TSC for its own Mach absolute time
timestamp mechanism, so there's no reason we can't enable this bit for guests.
When the feature is enabled, a migration blocker is installed.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-2-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The calculation of FrameTemp is done using the size indicated by mo_pushpop()
before being written back to EBP, but the final writeback to EBP is done using
the size indicated by mo_stacksize().
In the case where mo_pushpop() is MO_32 and mo_stacksize() is MO_16 then the
final writeback to EBP is done using MO_16 which can leave junk in the top
16-bits of EBP after executing ENTER.
Change the writeback of EBP to use the same size indicated by mo_pushpop() to
ensure that the full value is written back.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198
Message-ID: <20240606095319.229650-5-mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When OS/2 Warp configures its segment descriptors, many of them are configured with
the P flag clear to allow for a fault-on-demand implementation. In the case where
the stack value is POPped into the segment registers, the SP is incremented before
calling gen_helper_load_seg() to validate the segment descriptor:
IN:
0xffef2c0c: 66 07 popl %es
OP:
ld_i32 loc9,env,$0xfffffffffffffff8
sub_i32 loc9,loc9,$0x1
brcond_i32 loc9,$0x0,lt,$L0
st16_i32 loc9,env,$0xfffffffffffffff8
st8_i32 $0x1,env,$0xfffffffffffffffc
---- 0000000000000c0c 0000000000000000
ext16u_i64 loc0,rsp
add_i64 loc0,loc0,ss_base
ext32u_i64 loc0,loc0
qemu_ld_a64_i64 loc0,loc0,noat+un+leul,5
add_i64 loc3,rsp,$0x4
deposit_i64 rsp,rsp,loc3,$0x0,$0x10
extrl_i64_i32 loc5,loc0
call load_seg,$0x0,$0,env,$0x0,loc5
add_i64 rip,rip,$0x2
ext16u_i64 rip,rip
exit_tb $0x0
set_label $L0
exit_tb $0x7fff58000043
If helper_load_seg() generates a fault when validating the segment descriptor then as
the SP has already been incremented, the topmost word of the stack is overwritten by
the arguments pushed onto the stack by the CPU before taking the fault handler. As a
consequence things rapidly go wrong upon return from the fault handler due to the
corrupted stack.
Update the logic for the existing writeback condition so that a POP into the segment
registers also calls helper_load_seg() first before incrementing the SP, so that if a
fault occurs the SP remains unaltered.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2198
Message-ID: <20240606095319.229650-4-mark.cave-ayland@ilande.co.uk>
Fixes: cc1d28bdbe ("target/i386: move 00-5F opcodes to new decoder", 2024-05-07)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of directly implementing the writeback using gen_op_st_v(), use the
existing gen_writeback() function.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240606095319.229650-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will make subsequent changes a little easier to read.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240606095319.229650-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DISAS_NORETURN suppresses the work normally done by gen_eob(), and therefore
must be used in special cases only. Document them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HLT uses DISAS_NORETURN because the corresponding helper calls
cpu_loop_exit(). However, while gen_eob() clears HF_RF_MASK and
synthesizes a #DB exception if single-step is active, none of this is
done by HLT. Note that the single-step trap is generated after the halt
is finished.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PAUSE uses DISAS_NORETURN because the corresponding helper
calls cpu_loop_exit(). However, while HLT clear HF_INHIBIT_IRQ_MASK
to correctly handle "STI; HLT", the same is missing from PAUSE.
And also gen_eob() clears HF_RF_MASK and synthesizes a #DB exception
if single-step is active; none of this is done by HLT and PAUSE.
Start fixing PAUSE, HLT will follow.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From vm entry to exit, VMRUN is handled as a single instruction. It
uses DISAS_NORETURN in order to avoid processing TF or RF before
the first instruction executes in the guest. However, the corresponding
handling is missing in vmexit. Add it, and at the same time reorganize
the comments with quotes from the manual about the tasks performed
by a #VMEXIT.
Another gen_eob() task that is missing in VMRUN is preparing the
HF_INHIBIT_IRQ flag for the next instruction, in this case by loading
it from the VMCB control state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the required DR7 (either from the VMCB or from the host save
area) disables a breakpoint that was enabled prior to vmentry
or vmexit, it is left enabled and will trigger EXCP_DEBUG.
This causes a spurious #DB on the next crossing of the breakpoint.
To disable it, vmentry/vmexit must use cpu_x86_update_dr7
to load DR7.
Because cpu_x86_update_dr7 takes a 32-bit argument, check
reserved bits prior to calling cpu_x86_update_dr7, and do the
same for DR6 as well for consistency.
This scenario is tested by the "host_rflags" test in kvm-unit-tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR7.GD triggers a #DB exception on any access to debug registers.
The GD bit is cleared so that the #DB handler itself can access
the debug registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use decode.c's support for intercepts, doing the check in TCG-generated
code rather than the helper. This is cleaner because it allows removing
the eip_addend argument to helper_pause(), even though it adds a bit of
bloat for opcode 0x90's new decoding function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use decode.c's support for intercepts, doing the check in TCG-generated
code rather than the helper. This is cleaner because it allows removing
the eip_addend argument to helper_hlt().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ICEBP generates a trap-like exception, while gen_exception() produces
a fault. Resurrect gen_update_eip_next() to implement the desired
semantics.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When preparing an exception stack frame for a fault exception, the value
pushed for RF is 1. Take that into account. The same should be true
of interrupts for repeated string instructions, but the situation there
is complicated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
description:
loongarch_cpu_dump_state() want to dump all loongarch cpu
state registers, but there is a tiny typographical error when
printing "PRCFG2".
Cc: qemu-stable@nongnu.org
Signed-off-by: lanyanzhi <lanyanzhi22b@ict.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240604073831.666690-1-lanyanzhi22b@ict.ac.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Ignore the "monitor" portion and treat them the same
as their base ASIs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VIS4 completes the set, adding missing signed 8-bit ops
and missing unsigned 16 and 32-bit ops.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The manual separates VIS 3 and VIS 3B, even though they are both
present in all extant cpus. For clarity, let the translator
match the manual but otherwise leave them on the same feature bit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rearrange PDIST so that do_dddd is general purpose and may
be re-used for FMADDd etc. Add pickNaN and pickNaNMulAdd.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Form the proper register decoding from the start.
Because we're removing the translation from the inner-most
gen_load_fpr_* and gen_store_fpr_* routines, this must be
done for all insns at once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation returns the high 16 bits of a 24-bit multiply
that has been sign-extended to 32 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apply DFPREG to compute the register number.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Follow the Oracle Sparc 2015 implementation note and bound
the input value of N to 5 from the lower 3 bits of rs2.
Spell out all of the intermediate values, matching the diagram
in the manual. Fix extraction of upper_x and upper_y for N=0.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In SNP, the hashes page designated with a specific metadata entry
published in AmdSev OVMF.
Therefore, if the user enabled kernel hashes (for measured direct boot),
QEMU should prepare the content of hashes table, and during the
processing of the metadata entry it copy the content into the designated
page and encrypt it.
Note that in SNP (unlike SEV and SEV-ES) the measurements is done in
whole 4KB pages. Therefore QEMU zeros the whole page that includes the
hashes table, and fills in the kernel hashes area in that page, and then
encrypts the whole page. The rest of the page is reserved for SEV
launch secrets which are not usable anyway on SNP.
If the user disabled kernel hashes, QEMU pre-validates the kernel hashes
page as a zero page.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-24-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of PaddedSevHashTable before SevSnpGuest so
we can add a new such field to the latter.
No functional change intended.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-23-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the building of the kernel hashes table out from
sev_add_kernel_loader_hashes() to allow building it in
other memory areas (for SNP support).
No functional change intended.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-22-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM will forward GHCB page-state change requests to userspace in the
form of KVM_HC_MAP_GPA_RANGE, so make sure the hypercall handling is
enabled for SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-32-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_HC_MAP_GPA_RANGE will be used to send requests to userspace for
private/shared memory attribute updates requested by the guest.
Implement handling for that use-case along with some basic
infrastructure for enabling specific hypercall events.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-31-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke as sev_snp_launch_update_data() for SNP object.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-27-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add launch_update_data() in SevCommonStateClass and
invoke as sev_launch_update_data() for SEV object.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-26-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As with SEV, an SNP guest requires that the BIOS be part of the initial
encrypted/measured guest payload. Extend sev_encrypt_flash() to handle
the SNP case and plumb through the GPA of the BIOS location since this
is needed for SNP.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-25-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP firmware allows a special guest page to be populated with a
table of guest CPUID values so that they can be validated through
firmware before being loaded into encrypted guest memory where they can
be used in place of hypervisor-provided values[1].
As part of SEV-SNP guest initialization, use this interface to validate
the CPUID entries reported by KVM_GET_CPUID2 prior to initial guest
start and populate the CPUID page reserved by OVMF with the resulting
encrypted data.
[1] SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-21-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF reserves various pages so they can be pre-initialized/validated
prior to launching the guest. Add support for populating these pages
with the expected content.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-20-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent version of OVMF expanded the reset vector GUID list to add
SEV-specific metadata GUID. The SEV metadata describes the reserved
memory regions such as the secrets and CPUID page used during the SEV-SNP
guest launch.
The pc_system_get_ovmf_sev_metadata_ptr() is used to retieve the SEV
metadata pointer from the OVMF GUID list.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-19-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once KVM_SNP_LAUNCH_FINISH is called the vCPU state is copied into the
vCPU's VMSA page and measured/encrypted. Any attempt to read/write CPU
state afterward will only be acting on the initial data and so are
effectively no-ops.
Set the vCPU state to protected at this point so that QEMU don't
continue trying to re-sync vCPU data during guest runtime.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-18-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Process any queued up launch data and encrypt/measure it into the SNP
guest instance prior to initial guest launch.
This also updates the KVM_SEV_SNP_LAUNCH_UPDATE call to handle partial
update responses.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-17-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SNP_LAUNCH_START is called first to create a cryptographic launch
context within the firmware.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-16-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the current 'query-sev' command is relevant to both legacy
SEV/SEV-ES guests and SEV-SNP guests, with 2 exceptions:
- 'policy' is a 64-bit field for SEV-SNP, not 32-bit, and
the meaning of the bit positions has changed
- 'handle' is not relevant to SEV-SNP
To address this, this patch adds a new 'sev-type' field that can be
used as a discriminator to select between SEV and SEV-SNP-specific
fields/formats without breaking compatibility for existing management
tools (so long as management tools that add support for launching
SEV-SNP guest update their handling of query-sev appropriately).
The corresponding HMP command has also been fixed up similarly.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by:Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-15-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV guests can use either KVM_X86_DEFAULT_VM, KVM_X86_SEV_VM,
or KVM_X86_SEV_ES_VM depending on the configuration and what
the host kernel supports. SNP guests on the other hand can only
ever use KVM_X86_SNP_VM, so split determination of VM type out
into a separate class method that can be set accordingly for
sev-guest vs. sev-snp-guest objects and add handling for SNP.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-14-pankaj.gupta@amd.com>
[Remove unnecessary function pointer declaration. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-SNP guests, launch measurement is queried from within the guest
during attestation, so don't attempt to return it as part of
query-sev-launch-measure.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-13-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SNP guests will rely on this bit to determine certain feature support.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-12-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SNP does not support SMM and requires guest_memfd for
private guest memory, so add SNP specific kvm_init()
functionality in snp_kvm_init() class method.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-11-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some aspects of the init routine SEV are specific to SEV and not
applicable for SNP guests, so move the SEV-specific bits into
separate class method and retain only the common functionality.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-10-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a simple helper to check if the current guest type is SNP. Also have
SNP-enabled imply that SEV-ES is enabled as well, and fix up any places
where the sev_es_enabled() check is expecting a pure/non-SNP guest.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-9-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP support relies on a different set of properties/state than the
existing 'sev-guest' object. This patch introduces the 'sev-snp-guest'
object, which can be used to configure an SEV-SNP guest. For example,
a default-configured SEV-SNP guest with no additional information
passed in for use with attestation:
-object sev-snp-guest,id=sev0
or a fully-specified SEV-SNP guest where all spec-defined binary
blobs are passed in as base64-encoded strings:
-object sev-snp-guest,id=sev0, \
policy=0x30000, \
init-flags=0, \
id-block=YWFhYWFhYWFhYWFhYWFhCg==, \
id-auth=CxHK/OKLkXGn/KpAC7Wl1FSiisWDbGTEKz..., \
author-key-enabled=on, \
host-data=LNkCWBRC5CcdGXirbNUV1OrsR28s..., \
guest-visible-workarounds=AA==, \
See the QAPI schema updates included in this patch for more usage
details.
In some cases these blobs may be up to 4096 characters, but this is
generally well below the default limit for linux hosts where
command-line sizes are defined by the sysconf-configurable ARG_MAX
value, which defaults to 2097152 characters for Ubuntu hosts, for
example.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (for QAPI schema)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-8-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When sev-snp-guest objects are introduced there will be a number of
differences in how the launch finish is handled compared to the existing
sev-guest object. Move sev_launch_finish() to a class method to make it
easier to implement SNP-specific launch update functionality later.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-7-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When sev-snp-guest objects are introduced there will be a number of
differences in how the launch data is handled compared to the existing
sev-guest object. Move sev_launch_start() to a class method to make it
easier to implement SNP-specific launch update functionality later.
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-6-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently all SEV/SEV-ES functionality is managed through a single
'sev-guest' QOM type. With upcoming support for SEV-SNP, taking this
same approach won't work well since some of the properties/state
managed by 'sev-guest' is not applicable to SEV-SNP, which will instead
rely on a new QOM type with its own set of properties/state.
To prepare for this, this patch moves common state into an abstract
'sev-common' parent type to encapsulate properties/state that are
common to both SEV/SEV-ES and SEV-SNP, leaving only SEV/SEV-ES-specific
properties/state in the current 'sev-guest' type. This should not
affect current behavior or command-line options.
As part of this patch, some related changes are also made:
- a static 'sev_guest' variable is currently used to keep track of
the 'sev-guest' instance. SEV-SNP would similarly introduce an
'sev_snp_guest' static variable. But these instances are now
available via qdev_get_machine()->cgs, so switch to using that
instead and drop the static variable.
- 'sev_guest' is currently used as the name for the static variable
holding a pointer to the 'sev-guest' instance. Re-purpose the name
as a local variable referring the 'sev-guest' instance, and use
that consistently throughout the code so it can be easily
distinguished from sev-common/sev-snp-guest instances.
- 'sev' is generally used as the name for local variables holding a
pointer to the 'sev-guest' instance. In cases where that now points
to common state, use the name 'sev_common'; in cases where that now
points to state specific to 'sev-guest' instance, use the name
'sev_guest'
In order to enable kernel-hashes for SNP, pull it from
SevGuestProperties to its parent SevCommonProperties so
it will be available for both SEV and SNP.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-5-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xsave.flat checks that "executing the XSETBV instruction causes a general-
protection fault (#GP) if ECX = 0 and EAX[2:1] has the value 10b". QEMU allows
that option, so the test fails. Add the condition.
Cc: qemu-stable@nongnu.org
Fixes: 892544317f ("target/i386: implement XSAVE and XRSTOR of AVX registers", 2022-10-18)
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DisasContext.cpuid_ext_features indicates CPUID.01H.ECX.
Use DisasContext.cpuid_7_0_ecx_features field to check RDPID feature bit
(CPUID_7_0_ECX_RDPID).
Fixes: 6750485bf4 ("target/i386: implement RDPID in TCG")
Inspired-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240603080723.1256662-1-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit fixes an issue with MOV instructions (0x8C and 0x8E)
involving segment registers; MOV to segment register's source is
16-bit, while MOV from segment register has to explicitly set the
memory operand size to 16 bits. Introduce a new flag
X86_SPECIAL_Op0_Mw to handle this specification correctly.
Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Message-ID: <20240602100528.2135717-1-lixinyu20s@ict.ac.cn>
Fixes: 5e9e21bcc4 ("target/i386: move 60-BF opcodes to new decoder", 2024-05-07)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Features check of CPUID_SSE and CPUID_SSE2 should use cpuid_features,
rather than cpuid_ext_features.
Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240602100904.2137939-1-lixinyu20s@ict.ac.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Aside from the round robin threads this is all common code. By
moving the halt_cond setup we also no longer need hacks to work around
the race between QOM object creation and thread creation.
It is a little ugly to free stuff up for the round robin thread but
better it deal with its own specialises than making the other
accelerators jump through hoops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-3-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240412073346.458116-28-richard.henderson@linaro.org>
[PMD: Fixed typo reported by Peter Maydell]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1,
resulting in painful developper experience. Use snprintf() instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240411104340.6617-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit e1152f8166 ("target/mips: Remove helpers accessing
SAAR registers") this header is not needed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240529155216.5574-1-philmd@linaro.org>
riscv_cpu_do_interrupt() is not reachable on user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230626232007.8933-7-philmd@linaro.org>
We only build for 32/64-bit hosts, so TCG is required for
128-bit targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230626232007.8933-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230626232007.8933-2-philmd@linaro.org>
Commit 33a24910ae changed 'reg_width' to use 'vlenb', i.e. vector length
in bytes, when in this context we want 'reg_width' as the length in
bits.
Fix 'reg_width' back to the value in bits like 7cb59921c0
("target/riscv/gdbstub.c: use 'vlenb' instead of shifting 'vlen'") set
beforehand.
While we're at it, rename 'reg_width' to 'bitsize' to provide a bit more
clarity about what the variable represents. 'bitsize' is also used in
riscv_gen_dynamic_csr_feature() with the same purpose, i.e. as an input to
gdb_feature_builder_append_reg().
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Robin Dapp <rdapp.gcc@gmail.com>
Fixes: 33a24910ae ("target/riscv: Use GDBFeature for dynamic XML")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240517203054.880861-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In AIA spec, each hart (or each hart within a group) has a unique hart
number to locate the memory pages of interrupt files in the address
space. The number of bits required to represent any hart number is equal
to ceil(log2(hmax + 1)), where hmax is the largest hart number among
groups.
However, if the largest hart number among groups is a power of 2, QEMU
will pass an inaccurate hart-index-bit setting to Linux. For example, when
the guest OS has 4 harts, only ceil(log2(3 + 1)) = 2 bits are sufficient
to represent 4 harts, but we passes 3 to Linux. The code needs to be
updated to ensure accurate hart-index-bit settings.
Additionally, a Linux patch[1] is necessary to correctly recover the hart
index when the guest OS has only 1 hart, where the hart-index-bit is 0.
[1] https://lore.kernel.org/lkml/20240415064905.25184-1-yongxuan.wang@sifive.com/t/
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240515091129.28116-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When running the instruction
```
cbo.flush 0(x0)
```
QEMU would segfault.
The issue was in cpu_gpr[a->rs1] as QEMU does not have cpu_gpr[0]
allocated.
In order to fix this let's use the existing get_address()
helper. This also has the benefit of performing pointer mask
calculations on the address specified in rs1.
The pointer masking specificiation specifically states:
"""
Cache Management Operations: All instructions in Zicbom, Zicbop and Zicboz
"""
So this is the correct behaviour and we previously have been incorrectly
not masking the address.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: Fabian Thomas <fabian.thomas@cispa.de>
Fixes: e05da09b7c ("target/riscv: implement Zicbom extension")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240514023910.301766-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This extension has now been ratified:
https://jira.riscv.org/browse/RVS-2006 so the "x-" prefix can be
removed.
Since this is now a ratified extension add it to the list of extensions
included in the "max" CPU variant.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240514110217.22516-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Previous patch fixed the PMP priority in raise_mmu_exception() but we're still
setting mtval2 incorrectly. In riscv_cpu_tlb_fill(), after pmp check in 2 stage
translation part, mtval2 will be set in case of successes 2 stage translation but
failed pmp check.
In this case we gonna set mtval2 via env->guest_phys_fault_addr in context of
riscv_cpu_tlb_fill(), as this was a guest-page-fault, but it didn't and mtval2
should be zero, according to RISCV privileged spec sect. 9.4.4: When a guest
page-fault is taken into M-mode, mtval2 is written with either zero or guest
physical address that faulted, shifted by 2 bits. *For other traps, mtval2
is set to zero...*
Signed-off-by: Alexei Filippov <alexei.filippov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240503103052.6819-1-alexei.filippov@syntacore.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
raise_mmu_exception(), as is today, is prioritizing guest page faults by
checking first if virt_enabled && !first_stage, and then considering the
regular inst/load/store faults.
There's no mention in the spec about guest page fault being a higher
priority that PMP faults. In fact, privileged spec section 3.7.1 says:
"Attempting to fetch an instruction from a PMP region that does not have
execute permissions raises an instruction access-fault exception.
Attempting to execute a load or load-reserved instruction which accesses
a physical address within a PMP region without read permissions raises a
load access-fault exception. Attempting to execute a store,
store-conditional, or AMO instruction which accesses a physical address
within a PMP region without write permissions raises a store
access-fault exception."
So, in fact, we're doing it wrong - PMP faults should always be thrown,
regardless of also being a first or second stage fault.
The way riscv_cpu_tlb_fill() and get_physical_address() work is
adequate: a TRANSLATE_PMP_FAIL error is immediately reported and
reflected in the 'pmp_violation' flag. What we need is to change
raise_mmu_exception() to prioritize it.
Reported-by: Joseph Chan <jchan@ventanamicro.com>
Fixes: 82d53adfbb ("target/riscv/cpu_helper.c: Invalid exception on MMU translation stage")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240413105929.7030-1-alexei.filippov@syntacore.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the checking functions check both the single and double width
operators at the same time, then the single width operator checking
functions (require_rvf[min]) will check whether the SEW is 8.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The opfv_narrow_check needs to check the single width float operator by
require_rvf.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The require_scale_rvf function only checks the double width operator for
the vector floating point widen instructions, so most of the widen
checking functions need to add require_rvf for single width operator.
The vfwcvt.f.x.v and vfwcvt.f.xu.v instructions convert single width
integer to double width float, so the opfxv_widen_check function doesn’t
need require_rvf for the single width operator(integer).
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According v spec 18.4, only the vfwcvt.f.f.v and vfncvt.f.f.w
instructions will be affected by Zvfhmin extension.
And the vfwcvt.f.f.v and vfncvt.f.f.w instructions only support the
conversions of
* From 1*SEW(16/32) to 2*SEW(32/64)
* From 2*SEW(32/64) to 1*SEW(16/32)
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The th.sxstatus CSR can be used to identify available custom extension
on T-Head CPUs. The CSR is documented here:
https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadsxstatus.adoc
An important property of this patch is, that the th.sxstatus MAEE field
is not set (indicating that XTheadMae is not available).
XTheadMae is a memory attribute extension (similar to Svpbmt) which is
implemented in many T-Head CPUs (C906, C910, etc.) and utilizes bits
in PTEs that are marked as reserved. QEMU maintainers prefer to not
implement XTheadMae, so we need give kernels a mechanism to identify
if XTheadMae is available in a system or not. And this patch introduces
this mechanism in QEMU in a way that's compatible with real HW
(i.e., probing the th.sxstatus.MAEE bit).
Further context can be found on the list:
https://lists.gnu.org/archive/html/qemu-devel/2024-02/msg00775.html
Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-ID: <20240429073656.2486732-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In this patch, we modify the decoder to be a freely composable data
structure instead of a hardcoded one. It can be dynamically builded up
according to the extensions.
This approach has several benefits:
1. Provides support for heterogeneous cpu architectures. As we add decoder in
RISCVCPU, each cpu can have their own decoder, and the decoders can be
different due to cpu's features.
2. Improve the decoding efficiency. We run the guard_func to see if the decoder
can be added to the dynamic_decoder when building up the decoder. Therefore,
there is no need to run the guard_func when decoding each instruction. It can
improve the decoding efficiency
3. For vendor or dynamic cpus, it allows them to customize their own decoder
functions to improve decoding efficiency, especially when vendor-defined
instruction sets increase. Because of dynamic building up, it can skip the other
decoder guard functions when decoding.
4. Pre patch for allowing adding a vendor decoder before decode_insn32() with minimal
overhead for users that don't need this particular vendor decoder.
Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com>
Suggested-by: Christoph Muellner <christoph.muellner@vrull.eu>
Co-authored-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240506023607.29544-1-eric.huang@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This code has a typo that writes zvkb to zvkg, causing users can't
enable zvkb through the config. This patch gets this fixed.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Fixes: ea61ef7097 ("target/riscv: Move vector crypto extensions to riscv_cpu_extensions")
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Message-ID: <tencent_7E34EEF0F90B9A68BF38BEE09EC6D4877C0A@qq.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In RVV and vcrypto instructions, the masked and tail elements are set to 1s
using vext_set_elems_1s function if the vma/vta bit is set. It is the element
agnostic policy.
However, this function can't deal the big endian situation. This patch fixes
the problem by adding handling of such case.
Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240325021654.6594-1-eric.huang@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In current implementation, the gdbstub allows reading vector registers
only if V extension is supported. However, all vector extensions and
vector crypto extensions have the vector registers and they all depend
on Zve32x. The gdbstub should check for Zve32x instead.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Message-ID: <20240328022343.6871-4-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve64x extension. Enabling Zve64f enables Zve64x and
enabling Zve64x enables Zve32x according to their dependency.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2107
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-3-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve32x extension and replace some checks for Zve32f with
Zve32x, since Zve32f depends on Zve32x.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privileged spec section 4.1.9 mentions:
"When a trap is taken into S-mode, stval is written with
exception-specific information to assist software in handling the trap.
(...)
If stval is written with a nonzero value when a breakpoint,
address-misaligned, access-fault, or page-fault exception occurs on an
instruction fetch, load, or store, then stval will contain the faulting
virtual address."
A similar text is found for mtval in section 3.1.16.
Setting mtval/stval in this scenario is optional, but some softwares read
these regs when handling ebreaks.
Write 'badaddr' in all ebreak breakpoints to write the appropriate
'tval' during riscv_do_cpu_interrrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240416230437.1869024-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're not setting (s/m)tval when triggering breakpoints of type 2
(mcontrol) and 6 (mcontrol6). According to the debug spec section
5.7.12, "Match Control Type 6":
"The Privileged Spec says that breakpoint exceptions that occur on
instruction fetches, loads, or stores update the tval CSR with either
zero or the faulting virtual address. The faulting virtual address for
an mcontrol6 trigger with action = 0 is the address being accessed and
which caused that trigger to fire."
A similar text is also found in the Debug spec section 5.7.11 w.r.t.
mcontrol.
Note that what we're doing ATM is not violating the spec, but it's
simple enough to set mtval/stval and it makes life easier for any
software that relies on this info.
Given that we always use action = 0, save the faulting address for the
mcontrol and mcontrol6 trigger breakpoints into env->badaddr, which is
used as as scratch area for traps with address information. 'tval' is
then set during riscv_cpu_do_interrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240416230437.1869024-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Running a KVM guest using a 6.9-rc3 kernel, in a 6.8 host that has zkr
enabled, will fail with a kernel oops SIGILL right at the start. The
reason is that we can't expose zkr without implementing the SEED CSR.
Disabling zkr in the guest would be a workaround, but if the KVM doesn't
allow it we'll error out and never boot.
In hindsight this is too strict. If we keep proceeding, despite not
disabling the extension in the KVM vcpu, we'll not add the extension in
the riscv,isa. The guest kernel will be unaware of the extension, i.e.
it doesn't matter if the KVM vcpu has it enabled underneath or not. So
it's ok to keep booting in this case.
Change our current logic to not error out if we fail to disable an
extension in kvm_set_one_reg(), but show a warning and keep booting. It
is important to throw a warning because we must make the user aware that
the extension is still available in the vcpu, meaning that an
ill-behaved guest can ignore the riscv,isa settings and use the
extension.
The case we're handling happens with an EINVAL error code. If we fail to
disable the extension in KVM for any other reason, error out.
We'll also keep erroring out when we fail to enable an extension in KVM,
since adding the extension in riscv,isa at this point will cause a guest
malfunction because the extension isn't enabled in the vcpu.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422171425.333037-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current semihost exception number (16) is a reserved number (range
[16-17]). The upcoming double trap specification uses that number for
the double trap exception. Since the privileged spec (Table 22) defines
ranges for custom uses change the semihosting exception number to 63
which belongs to the range [48-63] in order to avoid any future
collisions with reserved exception.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240422135840.1959967-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SBI defines a Debug Console extension "DBCN" that will, in time, replace
the legacy console putchar and getchar SBI extensions.
The appeal of the DBCN extension is that it allows multiple bytes to be
read/written in the SBI console in a single SBI call.
As far as KVM goes, the DBCN calls are forwarded by an in-kernel KVM
module to userspace. But this will only happens if the KVM module
actually supports this SBI extension and we activate it.
We'll check for DBCN support during init time, checking if get-reg-list
is advertising KVM_RISCV_SBI_EXT_DBCN. In that case, we'll enable it via
kvm_set_one_reg() during kvm_arch_init_vcpu().
Finally, change kvm_riscv_handle_sbi() to handle the incoming calls for
SBI_EXT_DBCN, reading and writing as required.
A simple KVM guest with 'earlycon=sbi', running in an emulated RISC-V
host, takes around 20 seconds to boot without using DBCN. With this
patch we're taking around 14 seconds to boot due to the speed-up in the
terminal output. There's no change in boot time if the guest isn't
using earlycon.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240425155012.581366-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implementing wrs.nto to always just return is consistent with the
specification, as the instruction is permitted to terminate the
stall for any reason, but it's not useful for virtualization, where
we'd like the guest to trap to the hypervisor in order to allow
scheduling of the lock holding VCPU. Change to always immediately
raise exceptions when the appropriate conditions are present,
otherwise continue to just return. Note, immediately raising
exceptions is also consistent with the specification since the
time limit that should expire prior to the exception is
implementation-specific.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240424142808.62936-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zkr extension may only be exposed to KVM guests if the VMM
implements the SEED CSR. Use the same implementation as TCG.
Without this patch, running with a KVM which does not forward the
SEED CSR access to QEMU will result in an ILL exception being
injected into the guest (this results in Linux guests crashing on
boot). And, when running with a KVM which does forward the access,
QEMU will crash, since QEMU doesn't know what to do with the exit.
Fixes: 3108e2f1c6 ("target/riscv/kvm: update KVM exts to Linux 6.8")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422134605.534207-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.
We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.
We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the only instructions in the 3 source scalar class.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same
and disas_simd_scalar_three_reg_same, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have a gvec helper for the operations, but we aren't
using it on the aa32 neon side. Create a unified expander for
use by both aa32 and aa64 translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are faux 2-operand instructions, reading from rd.
Sort them next to the other three-operand same insns for clarity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need for a full comparison; xor produces non-zero bits
for QC just fine.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If help_op is not set, ret == DISAS_NEXT.
Shift the test up from surrounding help_wout, help_cout
to skipping to out, as we do elsewhere in the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-14-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Set per_address and ilen in per_ifetch; this is valid for
all PER exceptions and will last until the end of the
instruction. Therefore we don't need to give the same
data to per_check_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-13-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
CPU state is read on the exception path.
Fixes: 83bb161299 ("target-s390x: PER instruction-fetch nullification event support")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240502054417.234340-12-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
At this point the instruction is complete and there's nothing
left to do but raise the exception. With this change we need
not make two helper calls for this event.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-11-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Drop from argument, since gbea has always been updated with
this address. Add ilen argument for setting int_pgm_ilen.
Use update_cc_op before calling per_branch.
By raising the exception here, we need not call
per_check_exception later, which means we can clean up the
normal non-exception branch path.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-10-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The breaking-event-address register is updated regardless
of PER being enabled.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-9-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Always use a tcg branch, instead of movcond. The movcond
was not a bad idea before PER was added, but since then
we have either 2 or 3 actions to perform on each leg of
the branch, and multiple movcond is inefficient.
Reorder the taken branch to be fallthrough of the tcg branch.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small helper to handle unconditional indirect jumps.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For PER, we require a conditional call to helper_per_branch
for the conditional branch. Fold the remaining optimization
into a call to helper_goto_direct, which will take care of
the remaining gbea adjustment.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Record successful-branching, instruction-fetching, and
store-using-real-address. The other PER bits are not used
during translation. Having checked these at translation time,
we can remove runtime tests from the helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update from the PoO 14th edition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using exception unwind via tcg_s390_program_interrupt,
we discard the current value of psw.addr, which discards
the result of a branch.
Pass in the address of the next instruction, which may
not be sequential. Pass in ilen, which we would have
gotten from unwind and is passed to the exception handler.
Sync cc_op before the call, which we would have gotten
from unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-2-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This includes AND, ORR, EOR, BIC, ORN, BSF, BIT, BIF.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_simd_3same_pair
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same_fp16,
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_3same_float
and disas_simd_scalar_three_reg_same_fp16 so remove them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the last instruction within disas_fp_2src,
so remove that and its subroutines.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Load and zero-extend float16 into a TCGv_i32 before
all scalar operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert all forms (scalar, vector, scalar indexed, vector indexed),
which allows us to remove switch table entries elsewhere.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split some routines out of translate-a64.c and translate-sve.c
that are used by both.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of these insns have "if sz == '1' then UNDEFINED" in their pseudocode.
Fixes a RISU miscompare for invalid insn 0x5ef0c87a.
Fixes: 5c36d89567 ("arm/translate-a64: add all FP16 ops in simd_scalar_pairwise")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The decode of FMOV (vector, immediate, half-precision) vs
invalid cases of MOVI are incorrect.
Fixes RISU mismatch for invalid insn 0x2f01fd31.
Fixes: 70b4e6a445 ("arm/translate-a64: add FP16 FMOV to simd_mod_imm")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in that neither PLI nor PLDW are present in ARMv6T2,
but are introduced with ARMv7 and ARMv7MP respectively.
For clarity, do not use NOP for PLD.
Note that there is no PLDW (literal). Architecturally in the
T1 encoding of "PLD (literal)" bit 5 is "(0)", which means
that it should be zero and if it is not then the behaviour
is CONSTRAINED UNPREDICTABLE (might UNDEF, NOP, or ignore the
value of the bit).
In our implementation we have patterns for both:
+ PLD 1111 1000 -001 1111 1111 ------------ # (literal)
+ PLD 1111 1000 -011 1111 1111 ------------ # (literal)
and so we effectively ignore the value of bit 5. (This is a
permitted option for this CONSTRAINED UNPREDICTABLE.) This isn't a
behaviour change in this commit, since we previously had NOP lines
for both those patterns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-3-richard.henderson@linaro.org
[PMM: adjusted commit message to note that PLD (lit) T1 bit 5
being 1 is an UNPREDICTABLE case.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We wrongly encoded ID_AA64PFR1_EL1 using {3,0,0,4,2} in hvf_sreg_match[] so
we fail to get the expected ARMCPRegInfo from cp_regs hash table with the
wrong key.
Fix it with the correct encoding {3,0,0,4,1}. With that fixed, the Linux
guest can properly detect FEAT_SSBS2 on my M1 HW.
All DBG{B,W}{V,C}R_EL1 registers are also wrongly encoded with op0 == 14.
It happens to work because HVF_SYSREG(CRn, CRm, 14, op1, op2) equals to
HVF_SYSREG(CRn, CRm, 2, op1, op2), by definition. But we shouldn't rely on
it.
Cc: qemu-stable@nongnu.org
Fixes: a1477da3dd ("hvf: Add Apple Silicon support")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20240503153453.54389-1-zenghui.yu@linux.dev
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user/i386: Fix allocation and alignment of fp state in signal frame
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
0KPd/A==
=sYrE
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu into staging
target/i386: Introduce X86Access and use for xsave and friends
linux-user/i386: Fix allocation and alignment of fp state in signal frame
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
# MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
# oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
# rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
# EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
# bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
# 0KPd/A==
# =sYrE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 26 May 2024 05:48:44 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu: (28 commits)
target/i386: Pass host pointer and size to cpu_x86_{xsave,xrstor}
target/i386: Pass host pointer and size to cpu_x86_{fxsave,fxrstor}
target/i386: Pass host pointer and size to cpu_x86_{fsave,frstor}
target/i386: Convert do_xrstor to X86Access
target/i386: Convert do_xsave to X86Access
linux-user/i386: Honor xfeatures in xrstor_sigcontext
linux-user/i386: Fix allocation and alignment of fp state
linux-user/i386: Return boolean success from xrstor_sigcontext
linux-user/i386: Return boolean success from restore_sigcontext
linux-user/i386: Fix -mregparm=3 for signal delivery
linux-user/i386: Split out struct target_fregs_state
linux-user/i386: Replace target_fpstate_fxsave with X86LegacyXSaveArea
linux-user/i386: Remove xfeatures from target_fpstate_fxsave
linux-user/i386: Drop xfeatures_size from sigcontext arithmetic
target/i386: Add {hw,sw}_reserved to X86LegacyXSaveArea
target/i386: Add rbfm argument to cpu_x86_{xsave,xrstor}
target/i386: Split out do_xsave_chk
target/i386: Convert do_xrstor_* to X86Access
target/i386: Convert do_xsave_* to X86Access
tagret/i386: Convert do_fxsave, do_fxrstor to X86Access
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
In addition, return failure when the header contains invalid
xstate_bv. The kernel handles this via exception handling
within XSTATE_OP within xrstor_from_user_sigframe.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This completes the 512 byte structure, allowing the union to
be removed. Assert that the structure layout is as expected.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For now, continue to pass all 1's from signal.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This path is not required by user-only, and can in fact
be shared between xsave and xrstor.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The body of do_xrstor is now fully converted.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The body of do_xsave is now fully converted.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the alignment fault from do_* to helper_*, as it need
not apply to usage from within user-only signal handling.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide a method to amortize page lookup across large blocks.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZRy1gUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMTtQf/ZQskuqZyTrDhB/uVUT8oT5JNKQNS
GbFSgDK7jDdBeU3UmoYrlx9vfFR/mH5cA88MlusUy0SjQBNo4onD725o6Vvum/LW
DPe5ZyE34wvOasM7KXqJsD+2SttjaVjCXN4ip+E9WL5By2TWJgrk6IgTtvAhT9cd
LWb5OEIInaq7ZiWz3EpjmGvZd0M4mxqXi5OeDvmoFyf38xElfbWZWbfhJv+H5L1X
stivPBtUbXOzh63NL491hUYQtiAWlow8Qcnn7CYRflb6Vdd4QPK+6W8FX5KyU2eC
bXRXloW7wjEAC9pyiVky1SCvtNg7AVFL+9kxwiGreoZfo+/IMA+NP6pGOg==
=hpWy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
Build system and target/i386/translate.c cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZRy1gUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMTtQf/ZQskuqZyTrDhB/uVUT8oT5JNKQNS
# GbFSgDK7jDdBeU3UmoYrlx9vfFR/mH5cA88MlusUy0SjQBNo4onD725o6Vvum/LW
# DPe5ZyE34wvOasM7KXqJsD+2SttjaVjCXN4ip+E9WL5By2TWJgrk6IgTtvAhT9cd
# LWb5OEIInaq7ZiWz3EpjmGvZd0M4mxqXi5OeDvmoFyf38xElfbWZWbfhJv+H5L1X
# stivPBtUbXOzh63NL491hUYQtiAWlow8Qcnn7CYRflb6Vdd4QPK+6W8FX5KyU2eC
# bXRXloW7wjEAC9pyiVky1SCvtNg7AVFL+9kxwiGreoZfo+/IMA+NP6pGOg==
# =hpWy
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 25 May 2024 04:28:24 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
migration: remove unnecessary zlib dependency
meson: do not query modules before they are processed
tcg: include dependencies in static_library()
meson: remove unnecessary dependency
meson: remove unnecessary reference to libm
target/i386: remove aflag argument of gen_lea_v_seg
target/i386: clean up repeated string operations
target/i386: introduce gen_lea_ss_ofs
target/i386: use mo_stacksize more
target/i386: inline gen_add_A0_ds_seg
target/i386: split gen_ldst_modrm for load and store
target/i386: reg in gen_ldst_modrm is always OR_TMP0
target/i386: raze the gen_eob* jungle
target/i386: assert that gen_update_eip_cur and gen_update_eip_next are the same in tb_stop
target/i386: avoid calling gen_eob_inhibit_irq before tb_stop
target/i386: avoid calling gen_eob_syscall before tb_stop
target/i386: document and group DISAS_* constants
target/i386: set CC_OP in helpers if they want CC_OP_EFLAGS
target/i386: cpu_load_eflags already sets cc_op
target/i386: remove unnecessary gen_update_cc_op before gen_eob*
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not bother generating inline wrappers for gen_repz and gen_repz2;
use s->prefix to separate REPZ from REPNZ in the case of SCAS and
CMPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize gen_stack_A0() to include an initial add and to use an arbitrary
destination. This is a common pattern and it is not a huge burden to
add the extra arguments to the only caller of gen_stack_A0().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use mo_stacksize for all stack accesses, including when
a 64-bit code segment is impossible and the code is
therefore checking only for SS32(s).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is only used in MONITOR, where a direct call of gen_lea_v_seg
is simpler, and in XLAT. Inline it in the latter.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The is_store argument of gen_ldst_modrm has only ever been passed
a constant. Just split the function in two.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Values other than OR_TMP0 were only ever used by MOV and MOVNTI
opcodes. Now that these have been converted to the new decoder,
remove the argument.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make gen_eob take the DISAS_* constant as an argument, so that
it is not necessary to have wrappers around it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is an invariant now that there are no calls to gen_eob_inhibit_irq()
outside tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sti only has one exit, so it does not need to generate the
end-of-translation code inline. It can be deferred to tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
syscall and sysret only have one exit, so they do not need to
generate the end-of-translation code inline. It can be
deferred to tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place DISAS_* constants that update cpu_eip first, and
the "jump" ones last. Add comments explaining the differences
and usage.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark cc_op as clean and do not spill it at the end of the translation block.
Technically this is a tiny bit less efficient, but:
* it results in translations that are a tiny bit smaller
* for most of these instructions, it is not unlikely that they are close to
the end of the basic block, in which case cc_op would not be overwritten
* anyway the cost is probably dwarfed by that of computing flags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to set it again at the end of the translation block, cc_op_dirty
can be set to false.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already handled in gen_eob(). Before adding another DISAS_*
case, remove the double calls.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_helper_rsm cannot generate an exception, and reloads the flags.
So there's no need to spill cc_op and update cpu_eip, but on the
other hand cc_op must be reset to CC_OP_EFLAGS before returning.
It all works by chance, because by spilling cc_op before the call
to the helper, it becomes non-dirty and gen_eob will not overwrite
the CC_OP_EFLAGS value that is placed there by the helper. But
let's clean it up.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel SDM 18.3.1.4 "If an occurrence of the MOV or POP instruction
loads the SS register executes with EFLAGS.TF = 1, no single-step debug
exception occurs following the MOV or POP instruction."
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If EFLAGS.RF is 1, special processing in gen_eob_worker() is needed and
therefore goto_tb cannot be used.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ppc_hash32_pp_prot() function in mmu-hash32.c is the same as
pp_check() in mmu_common.c, merge these to remove duplicated code.
Define the common function as static lnline otherwise exporting the
function from mmu-hash32.c would stop the compiler inlining it which
results in slightly lower performance.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
[np: move ppc_hash32_pp_prot inline without changing it]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add a new mmu-booke.c file for BookE and related MMU bits from
mmu_common.c.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Checking if a page protection bit is set for a given access type is a
common operation. Add a function to avoid repeating the same check at
multiple places. As this relies on access type and page protection bit
values having certain relation also add an assert to ensure that this
assumption holds.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The value is only used once so no need to introduce a local variable
for it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc_hash32_xlate() the value of need_prop is checked in two places
but precalculating it does not help because when we reach the first
check we always return and not reach the second place so the value
will only be used once. We can drop the local variable and calculate
it when needed, which makes these checks using it similar to other
places with such checks.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Several 4xx CPUs and e200 share the same TLB settings enclosed in an
ifdef. Split it off in a common function to reduce code duplication
and the number of ifdefs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This flag for split instruction/data TLBs is only set for 6xx soft TLB
MMU model and not used otherwise so no need to have a separate flag
for that.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Remove mmu_ctx_t definition from internal.h as this type is only used
within mmu_common.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Now that only 6xx cases left in ppc_jumbo_xlate() we can change it
to ppc_6xx_xlate() also removing get_physical_address_wtlb().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_40x_xlate() to split off 40x handlning leaving only 6xx
in ppc_jumbo_xlate() now.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add ppc_real_mode_xlate() to handle real mode translation and allow
removing this case from ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Merge the code fetch and data access cases in a common switch.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move setting error_code that appears in every case out in front and
hoist the common fall through case for BOOKE206 as well which allows
removing the nested switches.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce ppc_booke_xlate() to handle BookE and BookE 2.06 cases to
reduce ppc_jumbo_xlate() further.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As BookE never returns -4 we can drop BookE from the direct store case
in ppc_jumbo_xlate().
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke206_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmubooke_get_physical_address() only uses the raddr and prot fields
from mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
mmu40x_get_physical_address() only uses the raddr and prot fields from
mmu_ctx_t. Pass these directly instead of using a ctx struct.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The "2" in booke206_update_mas_tlb_miss() call corresponds to
MMU_INST_FETCH which is the value of access_type in this branch;
mmubooke206_esr() only checks for MMU_DATA_STORE and it's called from
code access so using MMU_DATA_LOAD here seems wrong so replace it with
access_type here as well that yields the same result. This also makes
these calls the same as the data access branch further down.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of putting a large block of code in an if, invert the
condition and return early to be able to deindent the code block.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fix several qemu_log_mask() calls that are misindented.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function just does two assignments and and unnecessary check that
is always true so inline it in the only caller left and remove it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The real mode handling is identical in the remaining switch cases.
Split off these common real mode cases into a separate conditional to
leave only the else branches in the switch that are different.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
BookE does not have real mode so split off and handle it first in
get_physical_address_wtlb() before checking for real mode for other
MMU models.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return directly, which is simpler than dragging a return value through
multpile if and else blocks.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the debug logging within ppc6xx_tlb_check() from after its only
call to simplify the caller.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() we have a large if block with a two
line else branch that effectively returns. Invert the condition and
move the else there to allow deindenting the large if block to make
the flow easier to follow.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Repurpose get_segment_6xx_tlb() to do the whole address translation
for POWERPC_MMU_SOFT_6xx MMU model by moving the BAT check there and
renaming it to match other similar functions. These are only called
once together so no need to keep these separate functions and
combining them simplifies the caller allowing further restructuring.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Drop MPC8xx cases from get_physical_address_wtlb() and ppc_jumbo_xlate().
The default case would still catch this and abort the same way and
there is still a warning about it in ppc_tlb_invalidate_all() which is
called in ppc_cpu_reset_hold() so likely we never get here but to make
sure add a case to ppc_xlate() to the same effect.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In get_physical_address_wtlb() the real_mode flag depends on either
the MSR[IR] or MSR[DR] bit depending on access_type. Extract just the
needed bit in a more straight forward way instead of doing unnecessary
computation.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() we can assign the
value of prot2 directly to the destination, no need to have a separate
local variable for it.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmubooke_check_tlb() and mmubooke206_check_tlb() prot2 is
calculated first but only used after an unrelated check that can
return before tha value is used. Move the calculation after the check,
closer to where it is used, to keep them together and avoid computing
it when not needed.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The helper_rac function is defined but not used, remove it.
Fixes: 005b69fdcc (target/ppc: Remove PowerPC 601 CPUs)
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
I think it's use was removed by
Commit 5883d8b296 ("mmu-hash*: Don't use full ppc_hash{32,
64}_translate() path for get_phys_page_debug()")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
msgsnd has a broadcast mode that sends hypervisor doorbells to all
threads belonging to the same core as the target. A "subcore" mode
sends to all or one thread depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This implements the POWER SPRC/SPRD SPRs, and SCRATCH0-7 registers that
can be accessed via these indirect SPRs.
SCRATCH registers only provide storage, but they are used by firmware
for low level crash and progress data, so this implementation logs
writes to the registers to help with analysis.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
LDBAR, TTR are a Power-specific SPRs. These simple implementations
are enough for IBM proprietary firmware for now.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
AMOR, MMCRC, HRMOR, TSCR, HMEER, RPR SPRs are per-core or per-LPAR
registers with simple (generic) implementations.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
An SPR can be either per-thread, per-core, or per-LPAR. Per-LPAR means
per-thread or per-core, depending on 1LPAR mode.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
PPR32 provides access to the upper half of PPR.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
attn is an implementation-specific instruction that on POWER (and G5/
970) can be enabled with a HID bit (disabled = illegal), and executing
it causes the host processor to stop and the service processor to be
notified. Generally used for debugging.
Implement attn and make it checkstop the system, which should be good
enough for QEMU debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Change the logging not to print to stderr as well, because a
checkstop is a guest error (or perhaps a simulated machine error)
rather than a QEMU error, so send it to the log.
Update the checkstop message, and log CPU registers too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
checkstop state does not halt the system, interrupts continue to be
serviced, and other CPUs run. Make it stop the machine with
qemu_system_guest_panicked.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is a memop_size() function for this.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use DEF_MEMOP() consistently in larx and stcx. generation, and apply it
once when it's used rather than where the macros are expanded, to reduce
typing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds migration support for Branch History Rolling
Buffer (BHRB) internal state.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the clrbhrb and mfbhrbe instructions.
Since neither instruction is believed to be critical to
performance, both instructions were implemented using helper
functions.
Access to both instructions is controlled by bits in the
HFSCR (for privileged state) and MMCR0 (for problem state).
A new function, helper_mmcr0_facility_check, was added for
checking MMCR0[BHRBA] and raising a facility_unavailable exception
if required.
NOTE: For P8 and P9, due to a performance issue, branch history will
not be kept, but the instructions will be allowed to execute
as normal with the exception that the mfbhrbe instruction will
always return a zero value.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This commit continues adding support for the Branch History
Rolling Buffer (BHRB) as is provided starting with the P8
processor and continuing with its successors. This commit
is limited to the recording and filtering of taken branches.
The following changes were made:
- Enabled functionality on P10 processors only due to
performance impact seen with P8 and P9 where it is not
disabled for non problem state branches.
- Added a BHRB buffer for storing branch instruction and
target addresses for taken branches
- Renamed gen_update_cfar to gen_update_branch_history and
added a 'target' parameter to hold the branch target
address and 'inst_type' parameter to use for filtering
- Added TCG code to gen_update_branch_history that stores
data to the BHRB and updates the BHRB offset.
- Added BHRB resource initialization and reset functions
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This commit is preparatory to the addition of Branch History
Rolling Buffer (BHRB) functionality, which is being provided
today starting with the P8 processor.
BHRB uses several SPR register fields to control whether or not
a branch instruction's address (and sometimes target address)
should be recorded. Checking each of these fields with each
branch instruction using jitted code would lead to a significant
decrease in performance.
Therefore, it was decided that BHRB configuration bits that are
not expected to change frequently should have their state summarized
in an hflag so that the amount of checking done by jitted code can
be reduced.
This commit contains the changes for summarizing the state of the
following register fields in the HFLAGS_BHRB_ENABLE hflag:
MMCR0[FCP] - Determines if BHRB recording is frozen in the
problem state
MMCR0[FCPC] - A modifier for MMCR0[FCP]
MMCRA[BHRBRD] - Disables all BHRB recording for a thread
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
v{max, min}{u, s}{b, h, w, d} : VX-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
v{and, andc, nand, or, orc, nor, xor, eqv} : VX-form
The changes were verified by validating that the tcp ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l,st}ve{b,h,w}x,
{l,st}v{x,xl},
lvs{l,r} : X-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
andi[s]., {ori, xori}[s] : D-form
{and, andc, nand, or, orc, nor, xor, eqv}[.],
exts{b, h, w}[.], cnt{l, t}z{w, d}[.],
popcnt{b, w, d}, prty{w, d}, cmp, bpermd : X-form
With this patch, all the fixed-point logical instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
cmp{rb, eqb}, t{w, d} : X-form
t{w, d}i : D-form
isel : A-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also for CMPRB, following review comments :
Replaced repetition of arithmetic right shifting (tcg_gen_shri_i32) followed
by extraction of last 8 bits (tcg_gen_ext8u_i32) with extraction of the required
bits using offsets (tcg_gen_extract_i32).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
divd[u, e, eu][o][.] : XO-form
mod{sd, ud} : X-form
With this patch, all the fixed-point arithmetic instructions have been
moved to decodetree.
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also, remaned do_divwe method in fixedpoint-impl.c.inc to do_dive because it is
now used to divide doubleword operands as well, and not just words.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree :
mul{ld, ldo, hd, hdu}[.] : XO-form
madd{hd, hdu, ld} : VA-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op'
flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the below instructions to decodetree specification :
neg[o][.] : XO-form
mod{sw, uw}, darn : X-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: 32-bit compile fix]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Alex Bennée