* Use texraw for the unconverted texture (keep index fmt)
=> avoid bad filename order with the multiple texture layers
* add the real mipmap address
* Use a nice string format
The SPTI code is unused, and it's simpler to just use the Windows
ioctls/API if they work (only raw disk sector reading is an issue and
the SPTI workaround is already in place).
It doesn't support dual layer ISO images, and the ini has to be edited
manually so it loads an ISO image ("$" has to be prepended to the ISO
path as well). The PCSX2 internal ISO file reader is probably better in
most/all aspects and I don't think it's worth copying the logic from
PCSX2 into the plugin.
gsdx ogl: only use geometry shader to convert big enough draw call
The purpose of geometry shader is to reduce bandwidth (72 bytes by sprite)
and CPU load.
Unfortunately it increases CPU load due to extra shader validations.
So geometry shader will only be enabled for draw call with more than
16 sprites (arbitrarily, smallest number before shadow hearts plummet)
v2: don't disable geometry shader in replayer.
It is easier to spot sprite rendering and to manually read vertex info.
Warning can be reenabled on GCC
A warning isn't fixed as potentially the code is wrong
../pcsx2/gui/MemoryCardFolder.cpp: In member function ‘void FolderMemoryCard::FlushFileEntries(u32, u32, const wxString&, MemoryCardFileMetadataReference*)’:
../pcsx2/gui/MemoryCardFolder.cpp:1027:10: warning: unused variable ‘filenameCleaned’ [-Wunused-variable]
bool filenameCleaned = FileAccessHelper::CleanMemcardFilename( cleanName );
Strangely the game uses large texture to handle texture buffer.
I think it plays with WMS/WMT. I'm not sure texture shuffling is 100%
correct here. But without it, it's completely broken.
* 0x9C712FF0, Jak1, EU
* 0x472E7699, Jak1, US
* 0x2479F4A9, Jak2, EU
* 0x12804727, Jak3, EU
* 0xDF659E77, JakX, EU
Please report me the CRC of the US version too so I can add them.
Please test the shadows rendering (openGL HW + accurate blending at least basic)
The game sets the framebuffer as an input texture. So I did the same for
openGL. Code is protected with a CRC. It is working because the game want to sample
pixels.
For the record, I tested it GTA too, it doesn't work as expected because
the game will resize the framebuffer to a smaller one. So you don't have
the guarantee that pixel will be read before a data write.
Note: it requires at least accurate blending set on basic
Note: I need CRC of all Jak games that suffers of this issue. Thanks you :)
Default copy-constructor is eight 32 bits move
GSRendererOGL::Lines2Sprites code shrinks from 510B to 398B
(loop of the function 296B => 181B). Hopefully it will reduce the cost
to convert line to sprite on the CPU (i.e. when geometry shader is disabled)
It impacts all renderers. It ought to fix issue in GTA radiosity,
Shadows in Jak series. (note shadows will suck in upscaling)
Implementation is really brutal. Expect a massive slow down, but at least we can test the effect
easily.
Normally perf impact will remain reasonable if the game doesn't use a Read-Write effect
Performances number are welcomes (my guess is really awful in HW mode, slow in SW mode).
You can enable it with "UserHacks_AutoFlush = 1"
GS memory is only 4MB but rendering is allowed to be 2048x2048
with 32 bits format (so 16MB). Technically the frame/depth buffer can start
at the end of the GS memory. Let's not waste too much memory.
Fix crash with BASARAX
(game draws a 2048x1664 32 bits area)
The hack only fix the HW renderer but not the SW renderer. However I'm not sure
the issue is from GSdx.
The hack will disable alpha test that used to generate empty draw call.
Manual gives all setup to upload a palette from the host. But nothing forbid to render
directly in the palette buffer. (GS rule nb 1, there is no rule ^^)
Fix Virtua Fighter 2 dark colors
However I'm not sure we can fix HW renderer. Rendering is done on the GPU but palette
handling is done on the CPU... So we need to read back data (ouch, and slow). A quick
test didn't get the expected results. Potentially there are others bugs (aka not gonna
happen on the HW renderer)
IOCTL_CDROM_RAW_READ apparently does not work for some read modes on
some optical drives, which makes some CD-ROM games unplayable from the
disc.
Work around the issue by using SPTI to retrieve the raw sector data. The
old reading method has been retained in case SPTI cannot be used (if the
device could not be opened with write access).
Fix motocross mania missing texture. Close#1319
As far as I understand, transfer is initialized in DIR. But the real
write only occured later so the blit buffer could have been overwritten
by a new value.
BLIT 0 13700
TREG 40 40
DIR 0 0
BLIT 0 13f00 <=== the bad guy
Write! ... => 0x3f00 W:1 F:C_32 (DIR 00), dPos(0 0) size(64 64)
v2: set a value in m_tr.m_blit for load state
It creates a regression on game that uses a small temporary target to
upload textures of various sizes. Inital code was done to handle direct
frame write (background, FMV) so big target
Purpose is to control the filtering when final image is displayed on the screen
Could improve the sharpness of the output in some games (ofc, it will be pixelated)
When depth primitive is constant and depth test is greater or equal, we can
execute the depth write after color (depth status will only depends on the initial
value)
New case for RGB_ONLY ate:
If the blending equation uses a fixed alpha or a source alpha. We can postpone the alpha write
in a 2nd pass.
If depth can also be postponed, we can guarantee the order of correctness of the value.
1st pass => do RGB
2nd pass => do Alpha & Depth
It fixed Stuntman letter rendering :) Remaining of the game is still broken :(
At higher resolutions it takes too much time to save a screenshot at the
maximum compression level. So let's allow the user to set the
compression level.
This re-uses the png_compression_level setting. The default compression
level is 1 for speed, but if the user wishes to increase the compression
level (without using an external tool) and doesn't mind if the
screenshot takes more time to save then they can increase the
compression level up to a maximum of 9 (which can take quite a while).
Fixes#1527.
PNG_LIBRARIES adds both libpng and zlib to the command line.
PNG_LIBRARY only adds libpng to the linker command line, and the cmake
documentation also suggests not to use it.
Value seems wrongly rounded and you can't distinguish 0xFFFF from 0xFFFE
Instead check that depth is constant for the draw call and the value from the vertex buffer
Fix recent regression on GTA (and likely various games)
In FB_ONLY mode the alpha test impacts (discard) only the depth value.
If there is no depth buffer, we don't care about depth write. So alpha
test is useless and we can do the draw with a single draw call and no program
switch
Extend GSVector to support float move
Initial code likely used integer move for performance reason. However due to
the nan correction, register is now in float domain.
I hope it wasn't done on purpose.
CID 168624 (#1 of 1): Missing break in switch (MISSING_BREAK)
unterminated_case: The case for value CMD_CONFIG_MODE is not terminated by a 'break' statement.
CID 168626 (#1 of 1): Uninitialized scalar field
uninit_member: Non-static class member m_end_block is not initialized in this constructor nor in any functions that it calls.
Fix rendering issue on letters on Kengo/burnout 3/...
Default algo will execute the alpha test in 2 passes. However due to blending
you can't handle accurately the color.
Fortunately for us, the rendering uses an always pass depth test so you
can execute first all the color rendering (which doesn't depends on the alpha test)
And then the depth part which depends on the alpha test.
* Code was factorized a bit with the help of max_z
* Add an extra optimization if test is ZTST_GEQUAL and min z value is
the biggest value. Z test will always be pass.
Note: due to float rounding (23 bits mantissa vs 24 bits depth) the test
is done against 0xFF_FFFE and not 0xFF_FFFF. It is wrong but GPU will
also use float so impact will be null.
CreateEvent and CreateThread return NULL on failure, not
INVALID_HANDLE_VALUE. This should have been done in
0477e03965, I didn't check thoroughly
enough.
The solution files are unused and for ancient Visual Studio versions -
GSDumpGUI has its own solution file, and bin2cpp is included in the main
solution file.
The property sheets have either fallen out of use or were never used in
the first place.
Fixes a regression introduced by 46ba9aa117,
where the Linux GS replayer would always use the options in inis/GSdx.ini
(or use the default options if that doesn't exist) to replay the dump,
instead of using the GSdx.ini from the specified ini folder.
Update done on f712c5c6d0
Previous code use the size of the draw to compute latest block. I
don't know why I use .x/.y which are the origin offset so the start of the block.
Check the instruction set first in GPUinit, GPUconfigure and GPUtext
to prevent unsupported vector instructions from being executed.
Move the vector initialisation in GPUinit to a separate function - it
avoids a vzeroupper instruction.
vector push_back causes a SIGILL signal on a Nehalem (SSE4.2) QEMU VM
when compiled with GCC 6.1.1.
However, an empty constructor causes illegal instruction exceptions to be
generated on a Windows VM.
So here's an inbetween that looks stupid but works on what I've tested.
Not tested
* rumble
Save/load state will be implemented in the next commit
v2:
* Print current deteced pad mode
* fix dpad button tranmission
close#366
Fix#1457 (GTA)
The game uses a depth format for a pure color buffer (cokes do ravage
in gaming industry)
However I'm really afraid that it migth break another effect in other games.
Combine all the different configurations together so the project files
are more generic and maintainable.
Also standardise the layout so all the project files will be similar and
all have the same standard elements (even if empty).
Add 64-bit configurations.
Additional specifics:
spu2-x: FLOAT_SAMPLES preprocessor definition removed since it's unused.
Gregory Hainaut