f8e474a1c5
cdvdgigaherz: s/device/m_device/
2016-11-07 00:08:23 +00:00
8f11049c9f
cdvdgigaherz: Remove non-SPTI raw sector reading code
...
There doesn't seem to be any issues calling CreateFile with
GENERIC_WRITE access (which is necessary for SPTI) on a standard user
account, so the SPTI code should work in all cases.
2016-11-07 00:08:23 +00:00
f314c2a4d9
cdvdgigaherz: Simplify Q subchannel relative offset calculation
...
That way there's no need to calculate the track length for each track.
2016-11-07 00:08:23 +00:00
5d90afe648
LilyPad: Add separate bindings for each pad type ( #1609 )
...
Adds separate bindings for each of the pad types (DualShock2,
Guitar,Pop'n Music). This allows the user to change the button
configuration to better suit the Guitar and Pop'n Music pads without
messing up the bindings already setup for the DS2.
Close #1576 .
2016-11-06 21:59:19 +00:00
5ff9e94a2e
gsdx linux: align mipmapping gui option on Windows
2016-11-06 16:39:40 +01:00
107251e099
gsdx: sort crc game list
2016-11-06 16:30:51 +01:00
1547dd4215
GSDX-UI: Add Mipmap combobox
...
Mipmapping is now supported on hardware renderers thanks to Gregory. Please report any observed hardware mipmapping issues on the forums (http://forums.pcsx2.net/Thread-New-feature-Needs-testing-GSdx-HW-mode-Experimental-mipmap-support ) as potentially the HW mipmap code might still have some bugs.
2016-11-05 22:19:32 +05:30
58ed49f3c9
GSDX: Clean up warnings on MSVC
...
* Explicitly cast w_pages and h_pages into uint32.
* Prevent signed/unsigned comparison by converting lod into unsigned integer, honestly how coud a mipmapping level be negative?
2016-11-05 10:28:04 +01:00
758cf25888
gsdx: wrap bp for block ptr
...
Fix massive flickering of Beyond Good&Evil on SW renderer (HW happily overflow)
2016-11-04 23:03:12 +01:00
3d65312999
gsdx hw: remove old assert
...
Code is working fine with all formats
2016-11-04 23:02:49 +01:00
437afbbbf3
GSDX-PCRTC: Move Saturation hack to displayrect()
...
Fixes custom resolution scaling on Tribes aerial assault.
2016-11-01 17:54:46 +01:00
b871c6b46f
GSDX-TextureCache: Generalize scaling equation
...
Previously the dedicated custom resolution scaling equation was ignored for the second SetScale() call, generalizing the equations will also fix the DMC scaling issue on custom resolution. Also remove unnecessary checks for null on scale factors. The possibility for having a null scale factor value only exists on custom resolution and it will only happen on cases where the output circuit isn't ready yet. So the ideal way would be to handle all the required conditions of output circuit on "m_renderer->CanUpscale()" itself.
2016-11-01 17:54:46 +01:00
055f236aa5
GSVector: Add constructor to dispatch same values
2016-11-01 17:54:46 +01:00
aa4b2d9f3a
gsdx sw: wrap GS memory
...
Cost ought to remain small. Worst case is 2 extra "and" operation by group of pixels in scanline renderer
I think PixelAddressN functions are mostly call in the init.
2016-11-01 13:33:11 +01:00
233f66db5e
Fixed effects area wrapping calculation, which was always buggy but this
...
wasn't evident until additional addresses were precalculated.
Not expected to improve compatibility.
2016-11-01 11:12:41 +00:00
ba557e20a4
gsdx:recorder:unix: Fix thread leaking
2016-10-28 18:33:50 +01:00
7ab5cb20c8
gsdx: Don't close threads twice
...
CloseThread is called in the GSJobQueue destructor, so don't call it
again in the GSThread destructor.
Fixes #392 , which was caused by a use after free.
Also prevents pthread_join() from being called twice for each thread
on non-Windows operating systems, which is undefined behaviour.
2016-10-28 18:33:35 +01:00
bc7aa1a500
spu2-x:freebsd: Enable SDL backends
...
portaudio currently isn't providing me with sound, even though it did
before.
2016-10-27 22:03:49 +01:00
86a6f5d67c
cdvdgigaherz: s/itob/dec_to_bcd/
...
There's no need to have 2 ways to convert a u8 to a binary coded
decimal. Remove the macro version.
2016-10-26 22:11:40 +01:00
852ed21e88
cdvdgigaherz: Remove no drive support
...
It's the same as "No disc" or having no disc in the drive.
2016-10-26 17:30:28 +01:00
c023d7676a
cdvdgigaherz: Remove Source base class
...
Also remove virtuals from IOCtlSrc.
2016-10-26 17:30:27 +01:00
9f6c6d9917
cdvdgigaherz: Don't use GetFileSizeEx to get disk size
...
It doesn't seem to work for disks, and IOCTL_DISK_GET_LENGTH_INFO
usually succeeds instead.
2016-10-26 17:30:23 +01:00
9c643ae9ca
cdvdgigaherz: Remove CDVDabout and SysMessage
...
It's not accessible from PCSX2. More importantly, I don't want to port
it.
2016-10-26 17:30:21 +01:00
fb3580efa1
cdvdgigaherz: Remove unneeded code
2016-10-26 17:30:16 +01:00
5dfb7d63dc
gsdx: wrap gs page/block instead to skip them
...
Fix FMV of Thrillville when coupled with wrap_gs_mem = 1
2016-10-25 22:49:05 +02:00
db4b4fb166
gsdx ogl: keep a separate log for sw
2016-10-25 22:00:41 +02:00
cedc8aae44
gsdx: implement a shared memory to emulate the wrapping of the gs memory
...
Code can be enabled with "wrap_gs_mem = 1". Code only allow a single shared memory but
I don't think we need more anyway.
Linux only, Kernel panic expected with the HW renderer.
Fix FMV on Silent Hill 3 with the SW renderer
2016-10-25 20:29:38 +02:00
42b51611af
gsdx: don't dump debug file if not requested
2016-10-25 17:10:57 +02:00
820462dbc0
Merge pull request #1635 from sudonim1/reverb
...
SPU2-X: Reverb rewrite
2016-10-24 17:17:48 +01:00
e80ca0fa92
gsdx ogl: of course some driver don't work with GL_ARB_enhanced_layouts
...
Windows and (AMD or Intel)
2016-10-23 12:48:23 +02:00
885ef7a46f
gsdx ogl: reduce complexity of driver detection
2016-10-23 12:43:50 +02:00
565cb70875
gsdx ogl: don't request arb_texture_barrier for the SW renderer
...
Allow[1] to use the mesa software emulated driver to test EGL.
[1] also need export MESA_EXTENSION_OVERRIDE="GL_ARB_buffer_storage"
2016-10-23 12:13:57 +02:00
1668392988
SPU2-X: Mass reverb register renaming. Hopefully I didn't screw up the
...
cross-channel reflection registers.
2016-10-22 19:16:11 +01:00
9a51820dec
SPU2-X: Experimental reverb based on Dr. Hell's
...
http://drhell.web.fc2.com/ps1/ and/or Martin Korth's
http://problemkaputt.de/psx-spx.htm reverse engineering.
Negate final reverb output (don't know why but it's an
improvement when comparing the waveform).
2016-10-22 19:16:11 +01:00
01f0f436ac
gsdx linux replayer: allow to repack gs dump
...
linux_replay = -N will save N first frames to a new gs dump
Save disk space & debug time
2016-10-22 13:22:28 +02:00
99c43881df
gsdx egl: report an error if we fail to bind the openGL API
...
It seems Nvidia added openGL support in 355 (whereas I have 352 on debian).
I don't know the status on AMD.
2016-10-22 13:22:28 +02:00
d4a163e9cc
spu2: improve format consistency
2016-10-22 13:22:28 +02:00
1f44c4be2f
SPU2-X: PSX games should be able to read ENDX correctly now, which is
...
important functionality for many sound engines.
Fixed two other obvious errors in the psx compatibility merge, probably
inconsequential.
2016-10-20 04:17:03 +01:00
8fdf973e66
gsdx glsl: add basic support of GL_ARB_enhanced_layouts (GL4.4)
...
Hardcode location of interface to the location 0. If I understand the
spec correctly (unlikely), variable in interface will get successive
location.
Goal is to reduce driver work. Instead to compute some location based on
name matching approach (and silly validation), the driver can now use
static allocation.
Tests on future Mesa 13 are welcome
2016-10-19 23:03:39 +02:00
b1f2d27ddf
gsdx: move Haunting Ground CRC to dx level
2016-10-19 21:10:44 +02:00
264b764d6e
gsdx tc: improve haunting ground hack to remove the bloom effect
...
Just clear the buffer. The generic solution will be a copy from buffer A
to buffer B But it requires
1/ a big buffer A (otherwise it would overflow)
2/ a line width rescaling (+ the upscaling mess support)
2016-10-19 19:31:32 +02:00
c2cf8e528c
gsdx ogl: tekken5: only trigger channel effect shader when frame buffer is a single page
...
Fix missing model regression.
2016-10-17 19:34:55 +02:00
604d3bac3c
clang format: set SpacesBeforeTrailingComments to 1
2016-10-16 21:42:31 +02:00
8945ace3f7
GSDX-UI: Remove Trilinear options at some cases
...
Currently the Trilinear option only works on OpenGL. Remove it from combobox when other renderers are used.
2016-10-16 17:36:30 +01:00
45be4626f6
GSDX: Add an enum for texture filtering
...
Also re-order the combobox to make it look consistent with the tooltip description.
2016-10-16 17:36:30 +01:00
cc4cc342c2
gsdx hw: add a special sub target invalidation for haunting ground
...
Fix a wrong blending/blooming
Based on CRC to reduce impact on others games (speed)
2016-10-16 17:32:57 +02:00
31248da3d1
gsdx sw: Fix 16 bits date test on SSE build
...
AVX Builds were fixed in this commit a1a842b07f
2016-10-16 16:48:23 +02:00
defdd27987
gsdx: set m_nativeres to true in replayer
...
Otherwise you can't compare draw call between native and upscaled
2016-10-16 16:48:23 +02:00
f5e096a66f
spu2x: indicate pitch modulation and noise enabled status in the visual debugger
2016-10-16 14:15:12 +02:00
c284459382
gsdx tc: allow to search old depth/color in texture cache
...
But give higher priority to recent buffer.
Fix cut scene issue in Jak II (and potentially various game when EE/VU hacks are used)
2016-10-15 18:08:00 +02:00
Jonathan Li