The Disabled state sits between Game Closed and completely Shutdown - stronger than the former, as it refuses to let a game be opened again until AchievementManager is restored (which only happens upon a fresh core boot) but it isn't completely shut down and will still allow the player to be logged in and access the achievement settings and their (global) achievement header.
This adds the actual switch to turn on Hardcore Mode to the settings tab of the Achievements dialog. It is accompanied by a large tooltip warning explaining what it does and when it can be enabled.
The switch is only enabled to be turned on when no game is running, so that games are started in hardcore mode and can only be loaded via the console's memory card, as in the original hardware. Hardcore may be turned off while a game is running, but cannot be turned back on until the game is disabled.
The toggle trigger for hardcore mode also automatically disables the settings that are not allowed during hardcore mode.
Finally, the original flag in AchievementSettingsWidget to set whether things are enabled in hardcore mode (primarily Leaderboards) is replaced with the actual Hardcore Mode setting.
Play Input Recording would potentially unlock achievements without any player input and needs to be disabled. If a recording is already playing, hardcore mode cannot be enabled.
The player getting a better view of their surroundings than the game would normally allow could possibly give the player an advantage over the original hardware, so Freelook is disabled in hardcore mode. To do this, I disable the config flag for Freelook when it is accessed, to make sure that it is disabled whether it was enabled before or after hardcore mode was enabled.
Memory patches would be an easy way to manipulate the memory needed to calculate achievement logic, so they must be disabled. Riivolution patches that do not affect memory are allowed, as they will be hashed with the game file.
Debug Mode gives players direct read and write access to memory, which could be used to completely manipulate RetroAchievements logic and therefore is not allowed in hardcore mode.
Frame advancing is easily exploitable for slowing down a game and artificially improving reaction times and is not allowed in RetroAchievements hardcore mode.
While saving states is allowed (especially for the purpose of debugging), RetroAchievements does not allow loading saved states when hardcore mode is on.
This widget will be used in several places to notify the player that a feature has been disabled because hardcore mode is on. It includes a button to open the Achievement Settings so that Hardcore Mode may be turned off. Also included is the framework required to open AchievementsWindow specifically on the Settings tab.
Some state changes are meant to be near instantanoues, before switching to something else. By reporting ithe instant switch, the UI will flicker between states (pause/play button) and the debugger will unnecessarily update. Skipping the callback avoids these issues.
This makes it so that if you just want to reload the current style (eg. on program start, or in response to a system event), you don't need to know the name of the currently selected user style. It's also more consistent with the way the 'userstyle/enabled' flag works.
At the end of each frame automatically update the Current Value for
visible table rows in the selected and visible CheatSearchWidget (if
any). Also update all Current Values in all CheatSearchWidgets when the
State changes to Paused.
Only updating visible table rows serves to minimize the performance cost
of this feature. If the user scrolls to an un-updated cell it will
promptly be updated by either the next VIEndFieldEvent or the State
transitioning to Paused.
The table only needs to be recreated when the displayed addresses might
change. If we're just refreshing the current values then update those
table cells and leave the rest of the table alone.
A new tab is added to the Achievements dialog to chart out the leaderboards in a table. Each row of the table contains the leaderboard information and up to four relevant entries, varying based on how many entries are in the leaderboard, whether or not the player has a submitted score, and where in the leaderboard the player's score is.
The achievement badges will now have a blue or gold border to identify whether they have been unlocked in softcore or hardcore mode. Similarly, the game badge will have a blue border if all achievements have been unlocked in either mode or a gold border if all achievements have been unlocked in hardcore mode.
Provided the badges are turned on in the settings, each achievement will have a badge next to it on the progress tab. There are different badges for locked and unlocked (usually locked is grayscale while unlocked is in color but not necessarily) and the badge chosen depends on the player's current unlock and hardcore status.
Provided badges are turned on, if there's a player logged in their RetroAchievements icon will appear next to their player info in the header of the Achievements dialog. If they're playing a game, so will the icon for the game. Also performed some refactoring and reorganizing to the header as a whole so that it looks consistent whether a game is running or not.
This refactors the Rich Presence generation to store to a member field that can be exposed to the UI to display the Rich Presence in the achievement header. It still updates at its original rate of once per two minutes, but calls an update on the dialog when that ticks.
Moved AchievementManager Init further down in the MainWindow constructor; its original position was because it had an impact on the contents of the menu bar, and this is no longer the case.
Because CPU thread config changed callbacks are no longer instant,
g_Config.iEFBScale doesn't yet contain the new value when the hotkey OSD
code tries to read it.
Should fix https://bugs.dolphin-emu.org/issues/13343.
There's no reason not to allow this now that these settings are
cleanly integrated into the new config system. (Actually, maybe
we could even have done this before the previous commit...)
This fixes a problem where changing the JIT debug settings on
Android while a game was running wouldn't cause the changed settings
to apply to code blocks that already had been compiled.
The previous list had some issues. A lot of variant id's were set to 0x0000. Althought this works for some figures, on a technicallity implemented into the games, they are technically wrong and don't result in exactly the same experience as the real figures. For example, the previous small fry got a "series 1" text in the summon screen. The real small fry does not have this. I also added figure types so I can add seperate generation logic later.
The Kaos element only applies to 3 items. So, I decided to throw it under others since it's not listed as an element in the manual and you can easily search for Kaos
GCAdapter::UseAdapter() reads s_is_adapter_wanted, which gets
initialized by config_guard.~ConfigChangeCallbackGuard(). So we must
wait until after destroying the config guard to know whether we have any
controllers set to GC Adapter.
Expanded the use of the lock mutex already used for loading the player's existing unlock status to guard against races involving the Achievements dialog window reading from data AchievementManager might be in the process of updating. The lock has been exposed publicly and the AchievementsWindow uses it in its UpdateData method, and anywhere else that might modify data used to render that window has also been wrapped with it.
AchievementManager now has a SetUpdateCallback method for providing a single universal callback for anytime something important changes in the achievement state, such as logging in/out, game load/close, or events such as achievement unlocks. AchievementsWindow sets this callback in its own init to its UpdateData method so that the AchievementsWindow gets updated when one of these changes takes place.
This widget is a tab in the AchievementsWindow that displays the player's current achievement progress: which achievements are locked or unlocked, and the progress of achievements that have progress metrics.
This widget displays a header on the AchievementsWindow dialog above the tabs that shows the currently logged in user (if there is one) and the game they are playing (if there is one).
1 ) When first opened, the (user selected) post process shader config widget would print the wrong values on the text label next to int range sliders. For example if the range was from 1 to 6, and the value loaded from the config was 1, the label would print 0 when first opened, to then start showing the correct value once the slider was first moved.
This mirrors the behaviour of the float slider code below:
```auto* const value_box = new QLineEdit(QString::asprintf("%f", m_config_option->m_float_values[i]));```
2 ) The defautl int slider value would also be set wrong on first load, as it was being divided by the slider max instead of the slider step amount (again, just like for the float implementation). This is a mistake I had made with my previous submission.
This doesn't need to be handled by translators, since they're not
user-displayed text or just don't need to be translated.
While we're at it, we don't need to copy each entry of the resulting
list.
Mesa (llvmpipe) only reports 4x MSAA, and doesn't report 2x (or 1x, but we implicitly add that). The old logic did not handle this correctly, causing selecting 4x to fail and fall back to None.
This also removes VideoUtils::GetAvailableAntialiasingModes, and thus VideoUtils entirely, as its only other function was removed in 1f74653501.
We can move the construction of the Diff instance into the body of the
if statement, so that we only construct this if the condition is true.
While we're at it, we can move the symbol description string into the
instance, getting rid of a copy. The function itself can also be const
qualified.
Adds features to improve navigation of Skylanders portal menu, includes:
-List of Skylanders and filters for searching
-Improved buttons for faster loading options
-Added default user folder for storing .sky files
AchievementSettingsWidget is a dialog widget in AchievementsWindow for handling RetroAchievements settings in the user interface. This class contains the physical layout, widget connections, load/save functions and button responses. AchievementsWindow now has a tabbed list that this is inserted into; other tabs will be in a later pull request.
AchievementsWindow is the dialog box that will eventually contain the settings and progress data for RetroAchievements on Dolphin. This adds the barebones dialog, and connects it to MainWindow's MenuBar.
Adds two new hotkeys to open the menus for emulated USB devices- Skylanders Portal of Power and the Infinity Base. (Hotkeys only active when game is running).
Portal menu: Default is <Ctrl+P>.
Infinity base: Default is <Ctrl+I>
-The float sliders initial value wasn't calculated correctly
-Fix the checkbox dependencies not being applied until a setting was changed for the first time
ESCore implements the core functionality that can also be used outside of emulation. ESDevice implements the IOS device and is only available during emulation.
This reverts commit cfe3683668.
On Windows systems with 125% DPI scaling, this was causing both icons
and the OSD to be upscaled by 25% using nearest neighbor scaling, which
looks really bad. shuffle2 has said that this will be improved later,
but we should revert it for now for the sake of the upcoming beta build.
The old tooltip description box used GraphicsWidget to provide shared
code to the Graphics config panes for adding descriptions to their
settings.
The description box has been replaced by BalloonTips and serves no
further purpose, so remove it and have the Graphics panes derive from
QWidget instead.
GraphicsInteger is used by the panes in the Graphics config window to
create spin boxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigInteger better reflects its
purpose. This should also make it less confusing when ConfigIntegers
are added to other config windows.
GraphicsSlider is used by the panes in the Graphics config window to
create sliders that change their associated config setting, and update
their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigSlider better reflects its
purpose. This should also make it less confusing when ConfigSliders are
added to other config panes.
GraphicsRadioInt is used by the panes in the Graphics config window to
create radio buttons that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigRadioInt better reflects its
purpose. This should also make it less confusing when ConfigRadioInts
are added to other config panes.
m_xrr_config was used by the GeneralWidget::GetAvailableResolutions
function to get the list of supported fullscreen resolutions when
HAVE_XRANDR was set. aa4088a removed the ability to set that resolution
in the UI, leaving the GetAvailableResolutions function unused.
m_xrr_config is initialized in MainWindow which still uses it to toggle
fullscreen, but the references in GeneralWidget and GraphicsWidget
(which just ferried m_xrr_config from MainWindow to GeneralWidget) are
now unnecessary and removed in this commit.
Fixes dynamically changing dpi scaling.
Load resources from svg if possible.
Currently svg support is not in Qt build in Externals,
and image files need to be added later.
GraphicsChoice is used by the panes in the Graphics config window to
create combo boxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigChoice better reflects its
purpose. This should also make it less confusing when ConfigChoices are
eventually added to the other config windows.
QApplication should parse and remove and args it recognizes
before dolphin starts inspecting the args.
This allows using e.g. -style <style> on the commandline.
GraphicsBool is used by the panes in the Graphics config window to
create checkboxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigBool better reflects its
purpose. This should also make it less confusing when ConfigBools are
eventually added to the other config windows.
In older versions of Dolphin GraphicsBoolEx was used to create a pair of
radio buttons selecting one of Virtual XFB and Real XFB, but this was
removed with the introduction of Hybrid XFB in 65cd085f.
In the meantime GraphicsRadioInt was introduced to allow for Graphics
radio buttons with multiple options, so GraphicsBoolEx is now redundant.
Before, any call of Settings::SetDebugModeEnabled(true) would show it. This means that if the debugging UI is enabled, but the user manually closed the code widget, then toggling any option on the interface pane (such as "Pause on Focus Loss") would cause the code widget to reappear. Additionally, closing and reopening dolphin did not call SetDebugModeEnabled, so the code widget did not reappear in that case (it only appeared after touching the interface pane). This is a bit silly, so now only enabling the debugger does it.
This also somewhat resolves an inconsistency introduced by the previous commit: prior to it, --debugger would call SetDebugModeEnabled(true) and thus show the code pane; after these commits, it does not, as it acts like a config change. This is a behavior difference, but not a particularly important one.
Before, Settings::SetDebugModeEnabled was used; this calls SetBaseOrCurrent() which will usually permanently change the base configuration setting for the debugger to true. Thus, the debugger would remain active even if the --debugger command line option was removed. Now, it remains active only for the current run, like other command-line options.
Note that SetBaseOrCurrent is also used by the "Show Debugging UI" option under Options -> Interface; this means that if the debugger is turned off (or off and then back on) by the user while --debugger is specified, this will be reset to whatever the base configuration had when Dolphin is closed and reopened. This behavior is consistent with the rest of the UI.
To my understanding, the --debugger option is something from 5.0 stable/DolphinWx where there was no way to toggle the debug UI in the settings (and the command-line option was the only way of enabling it). It's less useful nowadays.
See https://bugs.dolphin-emu.org/issues/13232; this was introduced in 7dde0c3c31. Apparently, providing a parent for a widget that is not visible makes your new widget visible when the parent is later made visible, in addition to managing the deletion of the widget; the documentation does not specify this (only that if the parent is visible you need to explicitly show it).
The m_checkbox_lock_mouse QCheckBox was only conditionally being added
to the layout, leaving it unmanaged and leaking
Setting the parent will allow it to be managed.
The m_verbosity_debug button was only conditionally being added as
widget, this was done in order to hide the object, but this left it
unmanaged.
Unconditionally adding it to the layout and controlling it's visibility
will resolve these issues
Added AchievementManager class. Upon startup (currently only in DolphinQt), logs into RetroAchievements with the login credentials stored in achievements.ini.
Co-authored-by: AdmiralCurtiss <AdmiralCurtiss@users.noreply.github.com>
The QByteArray returned by QString::toUtf8() was being freed so the char
pointer was pointing to freed memory.
Found via ASan, didn't notice any issues during normal runtime.
This was triggered after hitting a key combo with alt (ex. toggle
fullscreen) probably happens with others
Adds the rcheevos library from RetroAchievements to the Dolphin Externals as a submodule. Change was verified to import correctly and build both via Visual Studio and via cmake ninja.
Also works around a bug where CMake's ninja generator doesn't properly handle ||'s on POST_BUILD commands, making the || apply to the whole build like `<link> && custom0 || custom1`
Will manually controlling both an accelerometer and a gyroscope at the
same time be reasonable to do? No idea. Was this easy to implement
thanks to the input override system? Yes.
Fixes https://bugs.dolphin-emu.org/issues/12443.
This gets rid of a blocking operation, improving performance and fixing
https://bugs.dolphin-emu.org/issues/12893.
This also makes us no longer directly access the state of certain UI
elements from the CPU thread, which probably wasn't thread-safe but
doesn't seem to have caused any observable issues so far.
This resulted in the labels being solid black even when audio stretching is disabled the first time the settings are opened, but then properly being greyed out after changing a setting (even the audio backend or DSP emulation engine, not just whether audio stretching is enabled).
Before these changes you could tell Dolphin to convert a game file into the same format it is already in, leading to the FileDialog using the input path as the default destination path
An unsuspecting user could then click Save and Dolphin would try to convert the input file by writing the destination file on top of it... leading to an I/O error and the input file being entirely removed
This avoids a pseudo infinite loop where CodeWidget::UpdateCallstack
would lock the CPU in order to read the call stack, causing the CPU to
call Host_UpdateDisasmDialog because it's transitioning from running to
pausing, causing Host::UpdateDisasmDialog to be emitted, causing
CodeWidget::Update to be called, once again causing
CodeWidget::UpdateCallstack to be called, repeating the cycle.
Dolphin didn't go completely unresponsive during this, because
Host_UpdateDisasmDialog schedules the emitting of Host::UpdateDisasmDialog
to happen on another thread without blocking, but it was stopping certain
operations like exiting emulation from working.
This fixes a problem I was having where using frame advance with the
debugger open would frequently cause panic alerts about invalid addresses
due to the CPU thread changing MSR.DR while the host thread was trying
to access memory.
To aid in tracking down all the places where we weren't properly locking
the CPU, I've created a new type (in Core.h) that you have to pass as a
reference or pointer to functions that require running as the CPU thread.
- Cancel doesn't shut down anymore.
Allowing it to be used multiple times thoughout the life of
the WorkQueue
- Remove Clear, so we only have Cancel semantics
- Add IsCancelling so work items can abort early if cancelling
- Replace m_cancelled and m_thread.joinable() guars with m_shutdown.
- Rename Flush to WaitForCompletion (As it's ambiguous if a function
called flush should be blocking or not)
- Add documentation
CMakeSettings.json is a Visual Studio only extention to cmake that isn't
supported anywhere else. Not even Visual Studio Code.
So we set CMAKE_PREFIX_PATH inside DolphinQt's CMakeLists.txt instead.
Almost all the virtual functions in Renderer are part of dolphin's
"graphics api abstraction layer", which has slowly formed over the
last decade or two.
Most of the work was done previously with the introduction of the
various "AbstractX" classes, associated with texture cache cleanups
and implementation of newer graphics APIs (Direct3D 12, Vulkan, Metal).
We are simply taking the last step and yeeting these functions out
of Renderer.
This "AbstractGfx" class is now completely agnostic of any details
from the flipper/hollywood GPU we are emulating, though somewhat
specialized.
(Will not build, this commit only contains changes outside VideoBackends)
Capitalize Skylander in tr strings
Lint and validation method fixes
Proper Attach and Change Interface method
Re-jig code to exit early and read easier
Skylander code tidy ups
Convert c array to std::array and fix comments
Formatting fixes/review changes
Variable comment
Migrate portal to System Impl and code tidy ups
Use struct
Restore review changes
Minor fix to schedule transfer method
Change descriptors to hex and fix comments
Ported the code from RPCS3, with improvements made to the handling of control messages and audio transfers, Co-Authored with @mandar1jn
Missing new line chars
Co-Authored-By: mandar1jn <49076509+mandar1jn@users.noreply.github.com>
We've decided this track will never be used in the future. Releases will
continue using the "beta" branch internally, though we'll have the
user-visible strings use a different name instead.
(Note: Dolphin provided builds have always defaulted to 'beta' as the
auto-update track, so anyone who set 'stable' did so manually.)
This should be a fairly easy merge, assuming I didn’t mess anything up. TL:DR no one uses it and it’s not great.
Boot from DVD Backup is an ancient feature with origins in the Megacommit. Back then, GameCube and Wii games were quite large relative to drives of the time. For example, in 2008, the most common hard drive sizes were 320GB and 512GB. On the 320GB drive I personally had at the time, as little as 42 Wii ISOs could have filled it entirely! And that’s ignoring any other files one might want to put onto a drive. Backup DVDs allowed users to burn relatively cheap DVD media and store their GameCube and Wii dumps in a Dolphin accessible way that didn’t eat into their precious HDD space. It had compromises, even then, but in 2008… I mean honestly users probably wouldn’t even notice those compromises with how Dolphin barely even worked at all back then.
Obviously, today the storage space concerns are not as big of an issue. According to seagate the average hard drive it sells today is 8TB. For typical laptops purchased now, the -minimum- selection for storage is usually 1TB. You can even buy a name brand 4TB external hard drive for $100. GC and Wii ISOs are not as big as they once were, relatively anyway. Plus flash drives and SD cards are super cheap and way faster than disc drives ever were. For anyone that has limited drive space, removable flash media can fulfill this offloading role far better than backup DVD media ever could.
Also no one has DVD drives anymore. That’s kind of an important detail.
But to see if Booting from DVD Backup even still worked, I decided to give it a try. I have an ASUS BW-16D1HT, a badass Bluray XL reading and burning drive, connected to my Windows 11 Threadripper 5975WX machine. A super fast drive on a super fast machine is as good as it possibly can get for this feature. So I bought a spindle of DVD-Rs, burned a couple of discs and gave it a try. Surprisingly, it does still work. However, as expected, it introduces a lot of stuttering. Testing Prime 1 and Prime 3, in both games stuttering was introduced whenever the DVD Drive had to suddenly seek. Spikes of 50ms occurred constantly, but I observed 150ms and even over 1000ms stutters! The worst was a three second stutter, when loading Elysia in Prime 3. I could even hear the stutters - any time the drive suddenly made a harsh seeking noise, the game would have a hard stutter. It worked but, it has some serious compromises.
Boot from DVD Backup isn’t great, using removable flash media or external hard drives is a FAR better option for anyone with limited storage space today, and no one can even use this feature anymore because their computers don’t even have disc drives. It’s time for Boot from DVD Backup to go!
So I did my best on the cleanup but I’m bound to have left some bits. Especially in translation - I didn’t get any warnings or anything there that could help point me to where to clean that up. Please review!
This generated a warning on GCC about the operation being potentially undefined (-Wsequence-point). I'm not sure if that was actually the case, but either way it is a mistake.
We should expose Enable Controller Input and the turbo settings for
GBA just like we do for GameCube controllers and Wii Remotes.
I just forgot about it when implementing the GBA TAS input window.
Use: callstack(0x80000000).
!callstack(value) works as a 'does not contain'.
Add strings to expr.h conditionals.
Use quotations: callstack("anim") to check symbols/name.
Lioncash