clang-format really *wants* the two empty lines to be removed;
otherwise, it will always flag MemoryUtil as needing formatting changes
which is an annoyance when it is used as a git filter driver.
clang-format really *wants* the two empty lines to be removed;
otherwise, it will always flag MemoryUtil as needing formatting changes
which is an annoyance when it is used as a git filter driver.
This adds a recenter control binding which allows recentering the
cursor when relative input is enabled.
(EnableSettingControl is renamed to avoid confusions.)
This makes the GUI show the settings that are loaded when the config
gets reloaded, instead of showing potentially outdated settings that
are not applied.
This adds an option to enable relative input for the Wiimote IR
as described in issue 9014.
Enabling it will result in the pointer not going back to the centre
and the inputs will control the direction, not the absolute position.
Also adds a Dead Zone setting which is really needed when relative
input is enabled to prevent the cursor from slowly drifting on
most controllers. (Note: the Deadzone setting has no effect when
relative input is disabled)
These were made when the button images were first remade many months ago, but they were never committed since there was no use for them at the time (and laziness :P). BUT now there is a PR that finally has use for these images, so it's time to get this into Dolphin and available for use!
Call Advance at the start of each timing slice instead of the end.
Possibly fixed a bug where a slice would randomly branch straight
back to Advance() because the flags were not set to the right
values before branching to the dispatcher entrypoint.
This fix a double break bug when hitting a memcheck and hitting play on the same instruction it broke to earlier. The state is put back to CPU_RUNNING after.
Doing this forces the window to be drawn before reparenting it. It fixes the possibility of creating an empty floating window if the selected tab wasn't corespoinding to the window.
There might be a better way to highlight the options when adding the memory check, but for now, this works and the breakpoint list reports the right settings anyway.
These are needed for the next commit. I had to modify the implementation of the DSP one too, but since it basically isn`t used, I don`t think it matters much. These options only matters when adding one.
It wouldn't impact performance until at least one memcheck is enabled. Because of this, it can be used in release builds without much impact, the only thing that woudl change is the use of HasAny method instead of preprocessor conditionals. Since the perforamnce decrease comes right when the first memcheck is added and restored when the last is removed, it basically is all beneficial and works the same way.
All formatting are individual per registers and they all have one option to go back to their original hexadecimal form.
- GPR: signed integer, unsigned integer, float
- FPR: double
Also happened to come accross an issue where editing the PFR would ignore the higher 32 bits of the new value, this had to be fixed for the format to work.
The min-heap provides no ordering when the key is the same on 2
nodes. Disambiguate identical times by tracking the order items
were added into the queue.
Some games will set q to a different value than 1.0 through
texture matrix manipulations. It seems the console will still
do the division in that case.
This removes a Dolphin-specific patch to the wxWidgets3 code
for the following reasons:
* Calling wxWindowGTK::DoSetSize on a top-level window can end up
calling wxTopLevelWindowGTK::DoMoveWindow, which triggers an assert
because it is not supposed to be called for a top-level wxWindow.
* We should not be patching the wxWidgets code because that means the
toolbars will still be broken if someone builds without using the
WX that is in our Externals.
Instead, we now use a derived class for wxAuiToolBar and override
DoSetSize() to remove the problematic behaviour to get the same effect
(fixing toolbars) but without changing Externals code and without
causing asserts and other issues.
Now that our timings are much more accurate it doesn't look like we
need it anymore. And the instant ARAM DMA mode + scheduling fixes
ctually breaks ATV: Quad Power Racing 2 (causing all sorts of werid
bugs).
Fundamentally, all this does is enforce the invariant that we always
translate effective addresses based on the current BAT registers and
page table before we do anything else with them.
This change can be logically divided into three parts. The first part is
creating a table to represent the current BAT state, and keeping it up to
date (PowerPC::IBATUpdated, PowerPC::DBATUpdated, etc.). This does
nothing by itself, but it's necessary for the other parts.
The second part (mostly in MMU.cpp) is simply removing all the hardcoded
checks for specific untranslated addresses, and consistently translating
addresses using the current BAT configuration. Very straightforward, but a
lot of code changes because we hardcoded assumptions all over the place.
The third part (mostly in Memmap.cpp) is making the fastmem arena reflect
the current BAT configuration. We do this by redoing the mapping (calling
memmap()) based on the BAT table whenever it changes.
One additional minor change is that translation can fail in two ways:
either the segment is a direct store segment, or page table lookup failed.
The difference doesn't usually matter, but the difference affects cache
instructions, like dcbz.
For step over, it was updating twice which actually made the red display on the register view (when a register changes since) malfunction. Since it doesn't seem to be usefull to update before AND after the run, the one before the run was removed.
For step out, well, because there was no chances given for the thread to run as it is single stepping all the time, I only added a call to update after it was done.
Init cannot be called more than once because it registers the
CoreTiming callbacks, that trips the assertions and will cause
anyone with PanicAlerts disabled to crash.
CoreTiming gets restored before ExpansionInterface so CoreTiming
events need to already be registered before the save state loading
begins. This means that the callbacks must be registered
unconditionally instead of on-demand.
Replace adhoc linked list with a priority heap. Performance
characteristics are mostly the same, but is more cache friendly.
[Priority Queues have O(log n) push/pop compared to the linked
list's O(n) push/O(1) pop but the queue is not big enough for
that to matter, so linear is faster over linked. Very slight gains
when framelimit is unlimited (Wind Waker), 1900% -> 1950%]
Some compilers don't have an automatic abs() overload for floats.
Doesn't really matter if they use the integer variant here, but
it's better to be explicit about the fact that we're using floats.
Dolphin no longer lowers itself below the top window when opening.
Dolphin no longer draws garbage lines all over the game list.
Use the correct platform macros so Dolphin can actually find the
translation catalogs on Unix.
Both those in the code window and the ones that appears when the user select edit perpective. The one that isn't fixed by this is in edit perspective mode, when the user drags a panel out and it becomes a floating window.
When n was a multiple of 4, the old implementation would overwrite
the following register with 0.
This was causing Not64 to crash.
Thanks to Extrems for spotting this.
DVDInterface shouldn't need to know anything about
the DTM format's 40-character limitation.
Also replacing "filename" in variable names with "path"
to make it clearer which variables contain the whole path
and which ones only contain the filename.
memory check
Also fix an oddity in the case when the last memory check is deleted,
the jit cache was supposed to be cleared in that case, but it was out of
the for loop that finds the one to delete so it was never run.
Naturally, the same fix for the adding the first memory check was
applied.
The 'revert' functionality is some very old left-over and isn't even working properly (read: could break Wiimote mapping). As no dialog features any cancel and revert functionality it is removed.
It's not available in OpenGL ES and officially it's not supported on OpenGL 3.0/3.1.
Fallback to old depth range code if there is no method to disable depth clipping.
It's more important to have correct clipping than to have accurate depth values.
Inaccurate depth values can be fixed by slow depth.
This introduces speculative constants, allowing FIFO writes to be
optimized in more places.
It also clarifies the guarantees of the FIFO optimization, changing
the location of some of the checks and potentially avoiding redundant
checks.
The original code assumed that we would always find a button in
control_buttons. However, this is incorrect, since the iterator can and
will be control_buttons.end() if the button that triggered the iterate
code is not in control_buttons, which happens when it's in an
exclude list.
I'm not sure this is the correct fix, but it looks like OSREPORT output
is Shift-JIS, so we need to convert it to UTF-8. Most characters work
fine without and with this conversion, but Japanese text completely
fails and results in outputting invalid UTF-8 (which gets shown as �).
When 5.0-211 updated wxWidgets to 3.1.0, some entries in the
wxLanguage enum were moved and added, changing the wxLanguage
values. Because we save Dolphin's interface language to disk
as a wxLanguage, the language you have set will mean something
different depending on whether you have the updated wx version
or not. For instance, setting the language to English with the
updated version and then using an older version will make
Dolphin use Dutch. Because we can't rely on the enum anymore,
I'm replacing the "Language" setting with a "LanguageCode"
setting that uses standard ISO 639 codes.
The gather pipe optimization postpones checking the FIFO until the end
of the current block (or 32 bytes have been written). This is usually
safe, but is not correct across EIEIO instructions.
This is inferred from a block in NBA2K11 which synchronizes the FIFO
by writing a byte to it, executing eieio, and checking if PI_FIFO_WPTR
has changed. This is not currently an issue, but will become an issue
if the gather pipe optimization is applied to more stores.
Add the CCodeWindow to the constructor of the memoryWindow so it can call the notify update of the breakpoint list.
Add the case of breakpoint update when receiving an event (the update command was issued, but wasn't managed before).
Run clang format and renamed the code window names.
Let's stop pretending that we support Triforce emulation.
Keeping this code around just in case someone will make
major improvements in the future isn't really worth it.
I'm keeping the Triforce game INIs so users will know that
the compatibility rating for Triforce games is 1 star (broken).
Rewrite GetXInputGUIDS to use SetupAPI instead of WMI Queries. When
using a language pack where the system language and user/program
language differ, Windows starts taking a VERY long time (10+ seconds)
to complete Queries for Win32_PNPEntity objects (it's probably
translating every single string since it transfers every single one
from the WMI server into memory in the program).
Fixes Issue 9744.
OSD messages other than these one and a half aren't translated,
and OSD only supports ASCII. (Also, that "Wiimote %i %s" uses %s
like it does is bad for translation, but that's easy to fix.)
These operations should always take the same amount of time,
not the same amount of ticks. The number of ticks per second
is different for GameCube and Wii.
Replaces old and simple usages of std::atomic<bool> with Common::Flag
(which was introduced after the initial usage), so it's clear that
the variable is a flag and because Common::Flag is well tested.
This also replaces the ready logic in WiimoteReal with Common::Event
since it was basically just unnecessarily reimplementing Common::Event.
Léo Lam