Should fix most graphical issues with Paper Mario: TTYD and Super Paper Mario. Fixes issue 360.
Since only those two games seem to require BBox support, and as per ector's suggestion, BBox is only enabled for those two games.
BBoxes and Display List Caches don't get along too well, causing Paper Mario: TTYD to hang during certain effects where BBoxes are used. For now, I disabled DList Cache for the Paper Mario games, hopefully both will be compatible in the future.
Uses a single page for configuring ALL wiimotes now.
Due to the use of wxWindow::NewControlId, this might increase our wx version requirements (irrelevant for windows users). Works fine with wx 2.8.10 at least, but the docs aren't more specific about when wxWindow::NewControlId was introduced. If anyone doesn't like this, I'll change it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7692 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix the wxMessageAlert called from non-gui threads in the WXGTK build to use the passed caption.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7678 8ced0084-cf51-0410-be5f-012b33b47a6e
Also if the OpenGL backend throw a panic alert if the RGB to/from YUYV shaders fail to compile instead of an error log. If these shaders fail to compile it should be reported. I am not sure that a panic alert should be thrown in general when any shader fails to compile (as was discussed on IRC).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7677 8ced0084-cf51-0410-be5f-012b33b47a6e
requires NG-id, NG-key-id, NG-priv, NG-sig
sorry for not fixing this sooner, I forgot that I cleared my wiis private keys before the initial commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7642 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed OnFrame.cpp/h to a more accurate Movie.cpp/h. Made some small changes that may improve movie synchronization.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7620 8ced0084-cf51-0410-be5f-012b33b47a6e
Also don't try to save and load states when the emulator is not running. This should fix most of issu 4600.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7607 8ced0084-cf51-0410-be5f-012b33b47a6e
It turns out that this (somewhat) gets rid of memory-related exceptions which used to occur (especially) during 8-bit cheat searches. At least this is the case with my computer that has 3GB of RAM (the issue didn't seem to be caused by 100% of RAM usage, however).
Hopefully you'll be able to perform the following steps without errors now:
1. Open any game in Dolphin;
2. Go to Tools->Cheats Manager, and open the "Cheat Search" tab;
3. Preferably set the "Data Size" to 8-bit (the smaller, the more initial search results);
4. Press the "New Scan" button;
5. Use the "Unknown" search filter (which won't narrow the results down at all);
6. Press the "Next Scan" button.
(oh, and fix a typo in a comment I introduced in r6791 :p)
Anyway, make sure to tell me any eventual errors/regressions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7596 8ced0084-cf51-0410-be5f-012b33b47a6e
Removes the ugliness that was the portable file, and now creating a shortcut or file association is less of a pain
it is still necessary to modify the file association from ".../dolphin.exe" "%1" to ".../dolphin.exe" /e "%1"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7593 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes button spacing more consistent and uses the native button order of the OK/Cancel/... buttons.
(Mostly) fixes issue 4390.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7581 8ced0084-cf51-0410-be5f-012b33b47a6e
Left unselected, dolphin defaults to nstc-u and sets ntsc-j if the iso is japanese (old behavior).
Selected, ntsc-j is forced.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7580 8ced0084-cf51-0410-be5f-012b33b47a6e
sliders being unresponsive during emulation. Fixes issue 4496.
wxw complaining about non-stock menuitem without text (sysmenu menuitem).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7579 8ced0084-cf51-0410-be5f-012b33b47a6e
- Moved display related options in the "Display" tab from the general config to the gfx config, renamed the tab to "Interface"
- Moved Wiimote related options in the "Wii" tab from the general config to the wiimote config
- Moved various other options to more appropriate places ("Set Console as NTSC-J", "Skip GC BIOS"
- Dropped "Window Size" adjustment
- Now displaying a warning if one tries to enable software rendering
- Other minor changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7577 8ced0084-cf51-0410-be5f-012b33b47a6e
changes fs getusage to return 1 additional inode to account for the directory itself
Fixes save creation for at least two games, R8XE52 (Jurassic: The Hunted), STEETR (Tetris Party Deluxe)
doesnt harm save creation in any games that i tested (about 25)
also it is now possible to boot a nand title by selecting the tmd file using File > Open
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7575 8ced0084-cf51-0410-be5f-012b33b47a6e
I believe this makes Dolphin more reliable than GCNcrypt v1.1 which seems to add (prepend) a buggy line when decrypting...
- Split lines using SplitString() once more (as done with ' ' and '-' already), instead of relying on find() and substr() and the (size_t)line variable.
- Rename some variables, use a for() loop instead of a while() loop.
- Apply the StripSpaces() function to each line before attempting to parse them as encrypted/decrypted AR code lines. Without this, lines such as "B1PD-DXRQ-GTRKM " (notice the unexpected space character) would be recognized neither as encrypted nor as decrypted, which could result in badly decrypted codes (a problem I had tried to explain here: http://forums.dolphin-emulator.com/showthread.php?pid=153532#pid153532).
- For the sake of error-checking, after pressing OK, throw a warning in the following situations: when a line of code is not in a valid encrypted or decrypted format, and whenever the resulting decrypted code doesn't contain any lines.
(did I do any mistakes?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7569 8ced0084-cf51-0410-be5f-012b33b47a6e
when nand root is changed the current sysconf is saved,
and the sysconf in the new location is either loaded (if exists)
or the default sysconf is created
wii menu item is updated when the root changes
small fix to saving gamelist paths to .ini paths that are removed from the gui are now removed from the ini instead of simply changing the number of paths
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7555 8ced0084-cf51-0410-be5f-012b33b47a6e
So, clarify this by rewriting the "tooltip" for the Free Look option. This should close issue 2882 and its duplicates.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7546 8ced0084-cf51-0410-be5f-012b33b47a6e
add ticket to CNANDContentLoader
move wad installer to CNANDContentManager
system menu can now be launched from a wad file without being installed first, (return to system menu from another title will still only work if system menu is installed)
cdb.vff: flushed to disc immediately, creates if the file exists but is too small, moved creation to Boot_WiiWad
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7530 8ced0084-cf51-0410-be5f-012b33b47a6e
now if you install the sysmenu from a wad in the gamelist the menubar will be updated with the new sysmenu version
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7528 8ced0084-cf51-0410-be5f-012b33b47a6e
Saving a state that is not recording over one that was will now delete the old recording. Fixes trying to record with the wrong savestate.
Fixed some compiler warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7505 8ced0084-cf51-0410-be5f-012b33b47a6e
- Introduced a description text field (!!)
- Fixed ALL setting descriptions
- Various other string changes
- Removed the projection statistics setting
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7488 8ced0084-cf51-0410-be5f-012b33b47a6e
- added a "Hacks" tab for everything which speeds up emulation
- regrouped stuff in a more sensible way
- Renamed some options to be less confusing.
- by disabling ALL checkboxes, you'll get the most accurate / recommended configuration now
- Merged the ATC options to a single slider with 4 values (with the rightmost being "ATC off")
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7486 8ced0084-cf51-0410-be5f-012b33b47a6e
- fixed a problem/crash which occurs with some gcc versions (in general on Linux systems, issue 4400)
- other minor GUI changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7472 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix a minor icon issue in the game properties dialog.
Use a little hack to deal with spaces in file names. Need to find a better way to deal with this.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7470 8ced0084-cf51-0410-be5f-012b33b47a6e
Also move the primary translation pot file to the external repository to facilitate updating translations when strings in the code are changed. Now the only time the primary dolphin repository needs to be changed for translations is when a new language is added.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7438 8ced0084-cf51-0410-be5f-012b33b47a6e
- Added final support to string type (planned implementation reaches 100%)
- Added support to post processing shaders (OpenGL backend)
- Code Maintenance:
- Reorganized the class hierarchy
- General polishing... deleted some redundant code
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7437 8ced0084-cf51-0410-be5f-012b33b47a6e
+ Added "Reset To Default" functionality for per-game profiles.
- Solved a window centering problem that occured during switching between Default Profile and a Per-game Profile.
+ Added final & complete support to reflect changes on the fly and real-time in all cases (even when you edit Default profile).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7416 8ced0084-cf51-0410-be5f-012b33b47a6e
Also, if the render window size changes while frame dumping, scale the resulting video to prevent clipping on linux. This is a complete fix for issue 4316 on linux. I don't know how to implement this on windows though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7412 8ced0084-cf51-0410-be5f-012b33b47a6e
- Removed recent ghanges about separate per-game Video Settings
- Added "One Window 3-State Support" (very close to full implementation)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7391 8ced0084-cf51-0410-be5f-012b33b47a6e
I knew it would be something tiny. 3D Vision is fixed now, I'll make this 3D Vision specific if it causes any problems, but I've tested it and it seems fine.
For anyone interested, because fullscreen wasn't set for wx first, the menus and stuff were being included in the size of the frame (which is being used for the backbuffer size), so it was getting 1920x1062 or something weird like that (for 1080p). In the render function, it then checks to see if the frame resolution is equal to any supported resolution and if it isn't, bumps you down to 640x480, apparently an unsupported 3D Vision mode... though now I think about it, I'm not sure why it wasn't messing with regular fullscreen mode.
This would have been so much easier with a working mouse...
I'm not even joking, my replacement mouse just arrived at the door...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7388 8ced0084-cf51-0410-be5f-012b33b47a6e
* Moved the config validity check to reflect the emulator enforced settings at the config dialog
* Removed some obsolete validity checks
* Corrected "EnablePixelLighting" typo in the ini files
Fixes issue 4277.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7374 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix a few more dialogs to close with escape.
Fix an issue with the pulse audio sound backend when the dsp emulation method is changed, and the frequency setting was not respected.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7358 8ced0084-cf51-0410-be5f-012b33b47a6e
Switch gtk keystate_lock back to a recursive mutex. Now that the mutex attributes are being initialized properly this doesn't seem to cause the segmentation faults anymore.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7349 8ced0084-cf51-0410-be5f-012b33b47a6e
Now po files can be updated as often as we want without bumping up the svn revision numbers of dolphin itself. I left the dolphin-emu.pot and primary build files in the primary dolphin-emu svn. The dolphin-emu.pot file will still need to be updated on occasion to reflect changes to strings in the program. The gettextize script will still work as before for this.
Also added Arabic translations to the build thanks to mansoor.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7343 8ced0084-cf51-0410-be5f-012b33b47a6e
+ minor GUI adjustements, CPUID Detect cleanup... video profile selection is disabled if a game is running
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7302 8ced0084-cf51-0410-be5f-012b33b47a6e
Add the option to clear a title from the NANDContentLoader and attempt to reload it
This allows the using the system menu immediately after installing rather than requiring a relaunch
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7290 8ced0084-cf51-0410-be5f-012b33b47a6e
Also change the for loops in SysConf to use iterators to placate godisgovernment and billiard. :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7283 8ced0084-cf51-0410-be5f-012b33b47a6e
Use the new configuration profile system instead.
Thanks to kostamarino for migrating the game inis to the new system :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7259 8ced0084-cf51-0410-be5f-012b33b47a6e
Parent message alerts by the active window. This way if another window is open it isn't pushed behind the main window. We probably should parent the message alerts by the calling window instead, but this may be good enough.
Make sure there is only one instance of some modeless windows (Cheats Manager and Net Play).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7257 8ced0084-cf51-0410-be5f-012b33b47a6e
Ticked = Clear sound but a bit unresponsive to controls
Filled = Same as r7225
Clear = Disable speaker
The option is in the Wii tab of the configuration.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7231 8ced0084-cf51-0410-be5f-012b33b47a6e
- Replace ToLong() with ToULong(), as to allow values in the [0x80000000..0xFFFFFFFF] range to be parsed correctly without failure.
- Remove the "val_base" hack, as it breaks hexadecimal values beginning with '-'.
Simply passing 0 as the second parameter to ToULong() is enough, as mentioned on this page: http://msdn.microsoft.com/en-us/library/5k9xb7x1%28v=VS.100%29.aspx
- Changed the error message (and some of its translations) to reflect that octal values are now auto-detected ("supported") as well.
To users:
Note that values beginning with '0' (not "0x" nor "0X") are now interpreted as octal values instead of decimal values. So be careful when using those!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7223 8ced0084-cf51-0410-be5f-012b33b47a6e
like it is supposed to and depending on the linking method used
this shows up as the inability to use it in an initializer.
I think this may be a wxWidgets bug (ticket #12927), but I haven't
fully debugged it yet.
For now, apply a workaround here.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7208 8ced0084-cf51-0410-be5f-012b33b47a6e
some X state will have initialized mutexes and some won't, leading
to unpredictable results depending on the feature set compiled into
wxWidgets and so on.
wxGTK starts by calling Xlib functions indirectly through gdk very
early on, so we must hook into wxApp::Initialize().
I believe this should properly fix issue 1540. In case of problems,
please reopen that issue. If you see XLockMutex in a backtrace,
that's a pretty good indication.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7205 8ced0084-cf51-0410-be5f-012b33b47a6e
Changes:
* Allow events to be scheduled when the emulator is not running. This allows the save state event to be added before the emulator starts.
* Removed the Audio back-end init flag from the save state. This value should not be saved as it is not data relevant to guest machine.
* Allow a recording to be started at any time (apart from when a recording is already being made).
* Updated the status bar and title bar when an on-screen message is shown
* Removed the saving of PEToken from the save state as the FIFO will save this information
* Added a couple Pixel Engine interrupt states to the save state
* Added the copyright notice to the GCPadStatus.h file.
This function is preliminary. Let us know of any bugs you find or any UI quirks.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7175 8ced0084-cf51-0410-be5f-012b33b47a6e
This allows ALL settings in the gfx configuration dialog to be adjusted _per game_ in a more user-friendly way than before.
Obsoletes the gfx related options in the ISO properties, but I kept those since the configuration profiles use different ini file keys (i.e. convert the game inis to the new naming, please!).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7167 8ced0084-cf51-0410-be5f-012b33b47a6e
Also verify the validity of gfx configuration directly after loading rather than in the GUI code (which was kinda stupid anyway).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7164 8ced0084-cf51-0410-be5f-012b33b47a6e
* Better control over which Wiimotes save/load input from input files (general sync improvement).
* Wiimote save stores the ACLQ, allowing maintaining control across save/load (thanks to skid for the idea).
* Wiimote reconnect on save/load now an option - enabled by default to preserve present behaviour. Disabling this allows the above change to be effective.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7147 8ced0084-cf51-0410-be5f-012b33b47a6e
* Frame counter is restored properly post-load.
* "Read-only mode" menu option added. Currently this either causes the movie file to be closed at the end of playback (if enabled) or continues recording past end of playback (if disabled).
* Can now properly resume recording from a state saved during movie playback.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7142 8ced0084-cf51-0410-be5f-012b33b47a6e
Update several of the other languages.
Fix those pesky DSPIntUtil.h compiler errors.
Clean up some remnants of building the plugins in the primary CMakeLists.txt file.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7127 8ced0084-cf51-0410-be5f-012b33b47a6e
Move NetPlay code from DolphinWX to Core.
Even NetPlay with nowx should be possible now if anyone felt like implementing a CLI for it ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7119 8ced0084-cf51-0410-be5f-012b33b47a6e
problems, whole functions in .h files need to also be static in
case they are included in several .cpp files.
Also a few other minor LTO fixes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7082 8ced0084-cf51-0410-be5f-012b33b47a6e
and just operate on lists of object files instead.
This helps with LTO since LLVM/clang LTO is completely broken
by static libraries. It also helps identify symbol clashes
between components like the former plugins.
Many linkers also expect static libraries to form a strict DAG
which turns out be a difficult rule to uphold in practice,
especially since some of our platforms aren't picky about this.
LTO builds currently appears to crash at runtime because of
the static wx libs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7056 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix another minor issue with frame dumping.
Add the graphics config dialog button back to the main config.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7041 8ced0084-cf51-0410-be5f-012b33b47a6e
Added SSE optimizations to JIT LLE, up to 136% speedup observed in Resident Evil games.
Rewrote the GUI to make it more user friendly, added a User friendly Setup.
Also Billiard please: learn to merge.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7000 8ced0084-cf51-0410-be5f-012b33b47a6e
Update pot file to reflect recent changes in strings in the code.
Make the Host_GetKeyState routine thread safe on linux.
Clean up config main, and migrate the plugin selection to the display tab.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6994 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix some debugger issues. Still need to get sound window working, but the invalid id panic alert is fixed.
Also, a ";" as a comment in an ini file is now only allowed at the beginning of a line. The debugger has settings strings with semicolons in them. That completely broke the debugger.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6989 8ced0084-cf51-0410-be5f-012b33b47a6e
crudelios